Benutzeranleitung / Produktwartung 5180G des Produzenten Palsonic
Zur Seite of 28
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 51CM CORDLE.
Contents Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference.
Contents Contents (continued) Channel Selection ................................................................................................... Adjusting Picture .....................................................................................
Clock/Game/Calendar Multi OSD language Hyperband 255 preset channels Automatic channel preset Full function remote control AV input & S-VIDEO input terminals Digital AFT technology Four picture mo.
Important Safety Cautions When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. Do not expose the TV set to rain or excessive moisture.
! This TV set can operate on an AC power of 240V, 50HZ. You must not use a power supply of any other type. High voltage exists in this TV set. Do not remove the cover 5 Do not cover the ventilating hole in the cabinet Keep a space of more than 5cm from the walls to the TV set to ensure adequate ventilation.
1. :Earphone Jack 2. MENU button: To enter into menu operation. 3. AV/TV button: Video input select. 4. VOL- button: volume down adjust; menu item adjust. 5. VOL+ button: volume up adjust; menu item adjust. 6. CH- button: channel down select; menu item select.
Back 1. Antenna input 2. AV input (VIDEO, AUDIO L/MONO, R) 3. S-VIDEO input 5.
6 Notes: In most cases, the function of buttons are equal to the CH+/- buttons, and the function of buttons are equal to the VOL+/- buttons; but in TELETEXT operation, the , , , buttons only serve as teletext control keys.
! Install two "AAA" batteries matching the +/- polarities of the battery to the +/- marks inside the battery compartment. Replace the battery cover. Notes: The battery life should be about one year under normal use. Do not try to recharge batteries not intended to be recharged.
INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Antenna installation Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used.
Connect to video and audio equipment This TV set provides 2 groups of AV input terminals for your convenient connection to VTR, DVD or video camera to enjoy the high quality picture. Please refer to the owner's manual of the equipment to be connected as well.
2 1 Turning off ! Press the Power Switch on the TV set. If no picture appears, then the TV set is in STANDBY mode. Now please follow step 2. In STANDBY mode, press the button on the remote controller and the TV set is turned on. In STANDBY mode, you can also press the AV/TV button on the set to turn on.
Operations Select Input Signal Select input signal ! 4 3 2 1 Press AV/TV button on the TV set or AV button on the remote control. When the set is in TV mode, press this button and the set goes to AV mode. Now you could watch video program from AV input terminals.
3 2 1 2 4 3 2 1 5 1. Press CH+ or CH- buttons to select item. Press VOL+ or VOL- buttons to adjust item. Press MENU button four times to call Program menu page. Auto Search Press MENU button repeatedly to enter into Program menu page. Press CH+ or CH- button repeatedly to select Auto Search item.
4 3 2 1 5 Press MENU button repeatedly to enter into Program menu page. Press CH+ or CH- button repeatedly to select Channel Number item. Press VOL+ or VOL- button to set a channel number (for example, channel 99). Press CH+ or CH- button repeatedly to select Channel Skip.
3 2 1 Setting Colour System If the picture colour is abnormal, maybe the colour system setting is wrong. Then you can select a proper colour system as follows. Press MENU button repeatedly to enter into Program menu page. Press VOL+ or VOL- button to select a proper colour system.
! 168 3 2 8 Press 0-9 direct channel selector. 1 Operations Channel Selection Use Direct Channel Selector (0-9 and -/-- buttons) To select one-digit channel: Press -/-- button repeatedly to display "-". To select two-digit channel: Press -/-- button repeatedly to display "--".
100 Item Standard Soft Brightness Brightness 4 Contrast weaker Color paler deeper Sharpness darker lighter softer sharper Picture mode Vivid Adjusting Picture Contrast Color 80 50 50 50 50 Press MENU button, the Picture menu page displays. Sharpness Tint Press CH+ or CH- button to select item.
Use MUTE button. ! Use VOL+ or VOL- button. Press VOL+ button, the volume increases; Press VOL- button, the volume decreases. The minimum volume is 0 and the maximum volume is 100. If you want to mute the sound, press button on the remote. To resume the sound, press this button again.
2 1 Clock Sleep Timer Time Off Time On 00:10 00:30 - - 2 3 1 ! 2 3 Press MENU button repeatedly to enter into Clock menu page. Press VOL+ or VOL- button to set sleep time. The sleep time switches among Off, 10, 20, 30, 40, 50 and 60 minutes. When the time is up the set auto goes to STANDBY.
3 2 1 1 2 3 Setting Time On Press MENU button repeatedly to enter into Clock menu page. Press CH- button repeatedly to select Time On item. Press VOL+ or VOL- button to set On time. After you finish setting Time On item, press the STANDBY button on the remote control.
B. Before the icon disappear, continue to press 4, 3, 2, 1 on the remote control. C. Press VOL+ or VOL- button to switch between Off and On. 2 1 Press CAL (calendar) button on the remote controller to display calendar. You can adjust month by VOL+/- buttons and year by CH+/- buttons.
Child Lock 1 2 4 3 Firstly, please refer to the Hotel mode on the previous page to enter into the Control menu page. Press CH - button to select Child Lock item and then press VOL+ or VOL- button to switch between On or Off. When the Child Lock is set to On, all programs will be shielded and the screen is black.
Teletext Operations Switch on/off/Description of TELETEXT/Button Introduction Teletext is an optional function, therefore only a set with the teletext system can receive the teletext broadcast. Switching Teletext on/off Press the TEXT button to switch on teletext.
Remote controller does not work Unevenness in colour in some parts of the screen The screen is black Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing.
! TV system & channel range Power Supply: Power Consumption: Dimensions(mm): Weight(kg): CRT: AC 240V, 50Hz 70W 605(W) x 481(H) x 482(D) 23 51cm System PAL-B/G VHF 2-12 UHF 21-69 CATV X~Z+2,S1~S41 TELETEXT Color System: Sound output: Accessories: WST FLOF TELETEXT PAL-B/G NTSC playback 1.
603-J21173-01 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 .
Ein wichtiger Punkt beim Kauf des Geräts Palsonic 5180G (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Palsonic 5180G noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Palsonic 5180G - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Palsonic 5180G reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Palsonic 5180G erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Palsonic 5180G besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Palsonic 5180G verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Palsonic 5180G. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Palsonic 5180G gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
