Benutzeranleitung / Produktwartung 20VROT des Produzenten Orion
Zur Seite of 44
Before operating the unit, please read this manual thoroughly. Operating Instructions Combination Colour TV and V ideo Cassette Recor der 14VROT 20VROT TELETEXT.
IMPOR T ANT Unauthorized recording of copyright television programmes, films, video tapes and other materials may infringe on the rights of copyright owners and be contrary to copyright laws. W ARNING To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
1 FEA TURES • TELETEXT • Auto Channel Memory •4 Video Head •1 Month, 8 Programmes Timer • One-Touch Timer Recording (OTR) • 30 Minutes Back Up • Real Time Tape Counter • NTSC Playback .
2 PRECAUTIONS MOISTURE CONDENSATION If the unit is suddenly moved from a cold place to a warm place, moisture may form inside the unit. In this case, do not operate it for two or three hours . Do not place the unit on or near appliances which may cause electromagnetic interference e.
3 Do not insert fingers or any other objects into the cassette loading slot. Do not spray cleaner or wax directly on the unit or use forced air to remove dust. Place the unit on a flat, stable, level surface, and never subject it to violent shaking or any other shock or impact.
4 STAND BY VOLUME T.REC REC/OTR STAND BY REC/OTR CHANNEL PLAY PHONES STOP/EJECT REW F.FWD VIDEO IN AUDIO IN AERIAL AV1 LOCA TION OF CONTR OLS FRONT REAR 1 17 18 20 DESCRIPTION OF CONTROLS FRONT : 1. Cassette Loading Slot - To insert or remove a video tape.
5 REMOTE CONTROL POWER SLEEP TV MONI. EJECT MUTE SPEED SP/LP REC/OTR PROGRAM PLA Y/SLOW STOP F .FWD REW MENU COUNTER RESET ZERO RETURN REVEAL/ AT R TIMER REC SUB P AGE INDEX PA USE/STILL CH/TRACKING PAG E CALL A V 123 45 6 78 0 9 – + VO LUME – + HOLD ENTER F/T/B CANCEL TEXT/ MIX/TV POWER SLEEP TV MONI.
6 REMOTE CONTROL (CONTINUED) Open the battery compart- ment cover. Install two “AAA/R03/UM-4” (penlight size) batteries. Replace the cover. BATTERY INSTALLATION • Use two "AAA/R03/UM-4" size penlight batteries for the remote control handset.
7 AERIAL AV1 Connect an indoor or outdoor antenna to the antenna socket at the rear panel as shown below. For all antenna circuit problems, please consult your local dealer. ANTENNA CONNECTIONS If an external antenna is not available, the telescopic antenna (supplied) may be used in areas of good TV reception.
8 POWER SLEEP TV MONI. EJECT MUTE SPEED SP/LP REC/OTR PROGRAM MENU – + HOLD ENTER COUNTER RESET ZERO RETURN REVEAL/ AT R F/T/B CANCEL TEXT/ MIX/TV TIMER REC STOP PLA Y/SLOW F .
9.
10 POWER SLEEP TV MONI. EJECT MUTE SPEED SP/LP REC/OTR PROGRAM MENU – + HOLD ENTER COUNTER RESET ZERO RETURN REVEAL/ AT R F/T/B CANCEL TEXT/ MIX/TV TIMER REC STOP PLA Y/SLOW F .FWD REW SUB P AGE INDEX PA USE/STILL CH/TRACKING PAG E CALL AV 1 2 3 45 6 78 0 9 – + VOLUME Press the MENU button.
11 POWER SLEEP TV MONI. EJECT MUTE SPEED SP/LP REC/OTR PROGRAM MENU – + HOLD ENTER COUNTER RESET ZERO RETURN REVEAL/ AT R F/T/B CANCEL TEXT/ MIX/TV TIMER REC STOP PLA Y/SLOW F .
12 POWER SLEEP TV MONI. EJECT MUTE SPEED SP/LP REC/OTR PROGRAM MENU – + HOLD ENTER COUNTER RESET ZERO RETURN REVEAL/ AT R F/T/B CANCEL TEXT/ MIX/TV TIMER REC STOP PLA Y/SLOW F .FWD REW TIME TEXT INDEX PA USE/STILL CH/TRACKING PAG E CALL AV 1 2 3 45 6 78 0 9 – + VOLUME EXAMPLE: Setting the clock to 11:30, 26th October, 2002.
13 TV OPERA TION Select channels either with the Direct Channel Selection buttons or with the CH buttons. To select with the Direct channel selection buttons: POWER Press the POWER button to turn on the TV/VCR. 2 1-9: Press one digit button for in between channel 1 - 9.
14 POWER SLEEP TV MONI. EJECT MUTE SPEED SP/LP REC/OTR PROGRAM MENU — + HOLD ENTER COUNTER RESET ZERO RETURN REVEAL/ AT R F/T/B CANCEL TEXT/ MIX/TV TIMER REC STOP PLA Y/SLOW F .
15 PICTURE CONTR OL ADJUSTMENTS.
16 PICTURE CONTR OL ADJUSTMENTS (CONTINUED) Each time you press the ENTER button, the picture adjustment Screen changes as follows. Press the ENTER button until "BRIGHTNESS" appears on the screen, then press the or button to adjust the brightness.
17 POWER SLEEP TV MONI. EJECT MUTE SPEED SP/LP REC/OTR PROGRAM MENU – + HOLD ENTER COUNTER RESET ZERO RETURN REVEAL/ AT R F/T/B CANCEL TEXT/ MIX/TV TIMER REC STOP PLA Y/SLOW F .
18 POWER SLEEP TV MONI. EJECT MUTE SPEED SP/LP REC/OTR PROGRAM MENU — + HOLD ENTER COUNTER RESET ZERO RETURN REVEAL/ AT R F/T/B CANCEL TEXT/ MIX/TV TIMER REC STOP PLA Y/SLOW F .FWD REW SUB P AGE INDEX P AUSE/STILL CH/TRACKING P AGE CALL AV 1 2 3 45 6 78 0 9 — + VOLUME EXAMPLE: Turning off the TV at 8:30.
19 HOTEL LOCK (CHILD LOCK) Hotel Lock feature enables you to limit the maximum volume and channel tuning. This special feature prevents someone from altering the VOLUME LIMIT or CHANNEL SETUP mode. These convenient functions are useful for hotel or hospital usage.
20.
21 LO ADING AND UNLO ADING THE VIDEO CASSETTE T APE Use only video cassette tapes marked . Push the centre of the tape until it is automatically inserted. AUTOMATIC POWER ON AND PLAY When loading a cassette tape without the erase prevention tab intact, playback will start immediately and the TV will turn on.
22 POWER SLEEP TV MONI. EJECT MUTE SPEED SP/LP REC/OTR PROGRAM MENU — + HOLD ENTER COUNTER RESET ZERO RETURN REVEAL/ AT R F/T/B CANCEL TEXT/ MIX/TV TIMER REC STOP PLA Y/SLOW F .FWD REW SUB P AGE INDEX P AUSE/STILL CH/TRACKING P AGE CALL AV 1 2 3 45 6 78 0 9 — + VOLUME To play a pre-recorded cassette tape.
23 SPECIAL PLA YB A CK TO VISUALLY SEARCH FOR DESIRED POINTS When either the F.FWD or REW button is pressed in the PLAYBACK mode, the speed search picture will appear. When pressed twice the search picture will increase in speed. Speed search times depend upon the speed used (SP or LP) during recording.
24 Press the TV MONI. button while in the playback mode. The video tape will continue to play while the picture switches to the TV channel selected on the TV/VCR. Press the button again to return to playback picture. TV MONI. TO MONITOR A TV PROGRAMME POWER SLEEP TV MONI.
25 POWER SLEEP TV MONI. EJECT MUTE SPEED SP/LP REC/OTR PROGRAM MENU — + HOLD ENTER COUNTER RESET ZERO RETURN REVEAL/ AT R F/T/B CANCEL TEXT/ MIX/TV TIMER REC STOP PLA Y/SLOW F .
26 POWER SLEEP TV MONI. EJECT MUTE SPEED SP/LP REC/OTR PROGRAM MENU — + HOLD ENTER COUNTER RESET ZERO RETURN REVEAL/ AT R F/T/B CANCEL TEXT/ MIX/TV TIMER REC STOP PLA Y/SLOW F .
27.
28 POWER SLEEP TV MONI. EJECT MUTE SPEED SP/LP REC/OTR PROGRAM MENU — + HOLD ENTER COUNTER RESET ZERO RETURN REVEAL/ AT R F/T/B CANCEL TEXT/ MIX/TV TIMER REC STOP PLA Y/SLOW F .FWD REW SUB P AGE INDEX P AUSE/STILL CH/TRACKING P AGE CALL AV 1 2 3 45 6 78 0 9 — + VOLUME Set the start time, end time, channel and tape speed as in step 4.
29 POWER SLEEP TV MONI. EJECT MUTE SPEED SP/LP REC/OTR PROGRAM MENU — + HOLD ENTER COUNTER RESET ZERO RETURN REVEAL/ AT R F/T/B CANCEL TEXT/ MIX/TV TIMER REC STOP PLA Y/SLOW F .
30 POWER SLEEP TV MONI. EJECT MUTE SPEED SP/LP REC/OTR PROGRAM MENU — + HOLD ENTER COUNTER RESET ZERO RETURN REVEAL/ AT R F/T/B CANCEL TEXT/ MIX/TV TIMER REC STOP PLA Y/SLOW F .
31 POWER SLEEP TV MONI. EJECT MUTE SPEED SP/LP REC/OTR PROGRAM MENU — + HOLD ENTER COUNTER RESET ZERO RETURN REVEAL/ AT R F/T/B CANCEL TEXT/ MIX/TV TIMER REC STOP PLA Y/SLOW F .FWD REW SUB P AGE INDEX P AUSE/STILL CH/TRACKING P AGE CALL AV 1 2 3 45 6 78 0 9 — + VOLUME 3 To cancel the counter display, press the CALL button again.
32 PLAY/SLOW.
33 VIDEO INDEX SEARCH SYSTEM (INDEX) The VIDEO INDEX SEARCH SYSTEM (INDEX) enables you to locate the beginning of any recording made on the TV/VCR. The Index Search function automatically records an INDEX mark on the tape whenever a recording is initiated.
34 VIDEOTEXT (TELETEXT) Most broadcasting stations offer the videote xt in addition to their standard TV program. The videotext off ers news , weather forecast, winning Lotto numbers , the program ov er view and other interesting ne ws. The te xt is received page by page, as soon as y ou select the broadcasting station.
35 To call a videotext page Leaf through the pages with the PA GE ( / ) - b utton (f orward or backward). Note: you will not necessarily find an existing page. for every page n umber you enter ..E.g. you ha ve called the page no . 116, but it will not appear on your screen.
36 If you connect the TV/VCR to another VCR or VIDEO CAMERA, you can duplicate a previously recorded tape. Make all connections before turning on the power. CONNECTION T O CAMCORDER CONNECTION T O ANO THER VCR F or duplicating a previously recorded tape from a camcorder , f ollow the camcorder manufacturer’ s instr uctions.
37 RECEPTION DISTURBANCE IGNITION Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from car ignition systems, neon lamps, electrical drills and other electrical appliances. GHOSTS Ghosts are caused by the television signal following two paths.
38 BEFORE REQUESTING SER VICE If your TV/VCR does not work properly check the following before calling a service engineer. CAUSE SYMPTOM SOLUTION PAGE POWER The AC power cord is not connected. Main power switch is OFF. Connect the AC power cord to AC outlet.
39 SYMPTOM CAUSE SOLUTION PAGE PLAYBACK Noise bars on screen. Can not locate INDEX mark. REMOTE CONTROL Tracking is not adjusted. Video heads are dirty. The tape is worn or damaged. The tape is worn or damaged. Adjust the TRACKING control. Clean the video heads.
40 SPECIFICA TIONS 14" (34 cm "V") measured diagonally 90 degrees deflection Electronic Tuner VHF: 0-S41 UHF: 21 - 69 VHF/ UHF 75 ohm unbalanced 1.
41 MEMO.
J5E00101A 02/09 ORION ELECTRIC CO ., L TD . (J AP AN) K.
Ein wichtiger Punkt beim Kauf des Geräts Orion 20VROT (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Orion 20VROT noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Orion 20VROT - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Orion 20VROT reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Orion 20VROT erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Orion 20VROT besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Orion 20VROT verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Orion 20VROT. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Orion 20VROT gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
