Benutzeranleitung / Produktwartung BTP-R880NP des Produzenten Orient Technologies
Zur Seite of 34
U USER’S MANUAL Receipt Printer BTP-R880NP Shandong New Beiyang Information T echnology Co., Lt d.
BTP-R880NP User’s Manual 1 Declaration Information in this document is subject to change without notice. SHANDONG NEW BEIY ANG INFORMA TION TECHNOLOGY CO., L TD. (hereinafter re ferred to as “SNBC”) reserves the ri ght to improve products as new technology , compone nts, so ftware, and firmware become available.
BTP-R880NP User’s Manual 2 General Safety Information Before installing and using the printer, please read the following items carefully. 1. Safety instructions Don’t touch the tear bar of printer.
BTP-R880NP User’s Manual 3 Content s TU 1 ． INTRODUCTION UT ............................................................................................................................... ........... 1 TU 1.1 O UTLINE UT ..........................
BTP-R880NP User’s Manual 4 TU 6.4 E THERNET INTERF ACE UT ............................................................................................................................... 16 TU 6.5 WLAN INTERF ACE UT ..................................
BTP-R880NP User’s Manual - 1 - 1 ． Introduction 1.1 Outline BTP-R880NP is a high performance thermal printer, which can be widely used for real-time printing application, such as POS system , restaurant syste m, ATM, etc.
BTP-R880NP User’s Manual - 2 - 2 ． S pecifications 2.1 Main specification Item Specification Color Black or Ivory Print Method Direct Thermal Resolution 203 × 180 DPI(standard) Paper width 57.5/ 69.5/76/80/82.5mm Print width Max. 80mm Standard: Max 230mm/s Gray scale print speed:Max.
BTP-R880NP User’s Manual - 3 - Button FEED button LED POWER LED, ERROR LED Machine Interface Buzzer Built-inInternal Buzzer, the volume can be adjusted.
BTP-R880NP User’s Manual - 4 - z Paper type: Continuous thermal paper z Paper supply method: Paper roll z Paper width: 82.5±0.5mm,80±0.5 mm, 76±0.
BTP-R880NP User’s Manual - 5 - Caution: The printer will measure the marks during the printing or feeding process. If the l engths of the mark (L1) is larger than the default value (default: 13 mm), the printer will give a paper-end alarm. 2.4 Print and tear off position 2.
BTP-R880NP User’s Manual - 6 - 3 Outline and component s 3.1 Outline and Parts 1—Power LED 2—Error LED 3—Feed button 4—Tear bar 5—T op cover latch 6—Cutter cover 7—Middle cover 8—Pow.
BTP-R880NP User’s Manual - 7 - d- Power switch (8) “O” power is to turn off printer . “—” power is to turn on printer . e- T op cover uplifting alarm sensor Monitor top cover status: open/close.
BTP-R880NP User’s Manual - 8 - 4 Inst allation 4.1 Unpacking Check whether all items, which are listed on the pa cking list, are present and in a good condition.
BTP-R880NP User’s Manual - 9 - 4.3 Connecting the Power Adapter 1) Confirm the power switch is turned off. 2) Insert the power cord into the pow er socket on the back of the printer. Caution: Use only the manufacture rs supplied power adapter or other equal model.
BTP-R880NP User’s Manual - 10 - 1) Turn off the printer. 2) Open the printer top cover, as in the following figure. 3) Drop in a paper roll in the paper house. 4) Pull the paper roll into the paper holder , and close the printer top cover . 5) T ear of f the surplus portion of the paper by using the tear bar .
BTP-R880NP User’s Manual - 1 1 - Paper guide in the slot 3&4: 57 ±0.5mm Confirm that the paper is rolled ti ghtly on the paper roll, otherwise, paper jam or other fault may occur. The paper roll should be placed stra ight in the paper compartment and not at an angle.
BTP-R880NP User’s Manual - 12 - 4.8.2 Remaining p aper amount adjustment of Paper near end sensor Remaining paper amount can be adjusted by adjus ti ng the position of paper near end sensor Paper ne.
BTP-R880NP User’s Manual - 13 - 5 Printer maintenance Caution: Before starting routine maintenance, confir m that the printer power is turned off. Do not use solvents like gasoline or acetone. When cleaning sensors, the prin ter should not be switched on until the pure alcohol has totally evaporated.
BTP-R880NP User’s Manual - 14 - Caution: The cutter sliding blade act s slowly during revo lving the thumb wheel. Go on revolving and observe carefully; If the thumb wheel cannot be turned, do not force the wheel, instead turn it the opposite direction.
BTP-R880NP User’s Manual - 15 - 6 Interface Signal 6.1Parallel interface Parallel interface can work in IEEE 1284 comp atible mode or half-byte mode.
BTP-R880NP User’s Manual - 16 - 6.2 RS-232 serial interface The serial interface of the printer is comp atible with RS-232, its connector is 25PIN female D type.
BTP-R880NP User’s Manual - 17 - ¾ Supports status back ¾ Supports parameter configuration ¾ Supports firmware update on-line ¾ Supports printer status query and interfac e module maintenance bas.
BTP-R880NP User’s Manual - 18 - requested from the local di stributor or manufacture. 6.6 Power interface definition Power supply interface signal definition PIN Signal Name 1 E 2 L 3 N 24V power interface definition PIN Signal Name 1 E 2 L 3 N 6.
BTP-R880NP User’s Manual - 19 - 7 T roubleshooting In case of printer fault, consult th is section for solutions and advice. If you do not find a solution in this section, pl ease contact your local dealer for assistance.
BTP-R880NP User’s Manual - 20 - 8. Accessories 8.1 Spill proof cover 8.2 HERALD – kitchen alarm system 8.3 Power Supply CASE This cover is used to install the AC power adapter under the printer; so that the power adapter would become an internal part of the printer (the pow er adapter will be inside of the printer).
BTP-R880NP User’s Manual - 21 - 2) Insert the plastic plugs in the holes and make su re that the plugs are fully inside the holes and do not stick out. 3) Screw the two screws in the plastic plugs and keep10mm spac e between the screw head and the wall surface.
BTP-R880NP User’s Manual - 22 - 8.5 Cable for PoweredUSB Connections.
BTP-R880NP User’s Manual - 23 - 9. Power Management The power management of BTP-R880NP has four operation modes: Ready , Active, Sleep, Off. 1. Printer will enter into Ready mode after pow ering on printer or completing printing job. 2. Printer will enter into Sleep mode if there is not any printing job for 5 minutes in Ready mode.
BTP-R880NP User’s Manual - 24 - APPENDIX A: Configuration setting function Parameter setting (configuring) by Feed button 1) Hold the FEED button pressed while switching the printer on. 2) After the printer has printed t he configuration sheet, pr ess and hold the FEED bu tton to configure the printer .
BTP-R880NP User’s Manual 25 P ARAMETER SETTING BY FEED BU TTON MAIN MENU Exit ->1 Print Self T est ->2 Configuratio n ->3 CONFIGURA TION Exit W ithout Save ->1 Exit W ith Save ->2 Com.
BTP-R880NP User’s Manual 26 Print '?' ->3 Rx Buff Size ->4 RX BUFFER SIZE :4K Bytes Back T o Last Menu ->1 4k Bytes ->2 45 Bytes ->3 64K Bytes ->4 Mechanism & Hardwar.
BTP-R880NP User’s Manual 27 82.5mm ->6 Left Margin ->4 LEFT MARGIN:7mm Back T o Last Menu ->1 0mm ->2 1mm ->3 3mm ->4 5mm ->5 7mm ->6 9mm ->7 Right Margin ->5 RIGHT MAR.
BTP-R880NP User’s Manual 28 55% ->3 50% ->4 45% ->5 40% ->6 35% ->7 30% ->8 Gray Scale Mode ->10 Gray Scale Mode:Mode3 Back T o Last Menu ->1 Mode 0 ->2 Mode 1 ->3 Mode.
BTP-R880NP User’s Manual 29 Select UDFONTB ->5 Beep settings ->9 Beep settings: Disabled Back T o Last Menu ->1 Enable Ex ternal Herald ->2 Enable Int ernal buzzer ->3 BEEP MODE Back .
Ein wichtiger Punkt beim Kauf des Geräts Orient Technologies BTP-R880NP (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Orient Technologies BTP-R880NP noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Orient Technologies BTP-R880NP - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Orient Technologies BTP-R880NP reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Orient Technologies BTP-R880NP erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Orient Technologies BTP-R880NP besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Orient Technologies BTP-R880NP verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Orient Technologies BTP-R880NP. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Orient Technologies BTP-R880NP gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
