Benutzeranleitung / Produktwartung pro800 DECT des Produzenten Oricom
Zur Seite of 40
Professional Series User Guide Pro800 DECT Digital Cordless T elephone with Answering System Pro600 DECT Digital Cordless T elephone Keep this user guide for future reference.
T ABLE OF CONTENTS W arnings and Safety Information ...................................................................................................... 1 Getting Started ..............................................................................
1 W arnings and Safety Information • This telephone complies with applicable safety requirements for exposure to radio waves (EMR). The mean power of this telephone doesnotexceed20mWlimitatwhichpointtestingisrequired.
2 Getting Started Installation and Charger 1. Connect the mains adaptor (supplied) to the socket on thebackofthebaseunitandtothewallmainssupply .
3 Getting Started Pack contents Depending on the model you have purchased this pack shouldcontainthefollowingitems: If any of these are missing, please contact Oricom directly .
4 Getting Started Pro800 Pause (long press 0) Microphone Incoming call light Memory1/Userprole1 30 dB Boost Display Menu/Mute/Delete Internal call Externalcall/Handsfree */Ringeron/o.
5 Getting Started Pro600 Incoming call light Volumeup/down&Equaliser Memory2/Userprole2 Up/Redial Headsetsocket(Headsetnotincluded) PhoneBook Recall End call Do.
6 Operating the T elephone Operating the T elephone The instructions throughout this guide are for both the telephone base and the cordless handset, unless stated otherwise. Display and explanation of operation sequences.
7 Operating the T elephone Navigating in the menu Allthehandsetfunctionscanbeaccessedviathe menu. Pleasereferto"Usingthemenu"onpage12for information on how to access each function. All descriptions in this operating manual assume that thehandsetisinStandbymode.
8 T elephone Making a call Enterthephonenumber(max. 24digits) Followingincorrectinput, presstodelete the last digit Dialthephonenumber It is also possible to press the external call button rst to obtain dialling tone.
9 Chain dialling This feature is used for more complex telephone services,egfortelephonebankingorcallingcard procedures. Severalnumbersstoredinthephone bookcanbedialledsuccessivelywhenaconnection hasalreadybeenmade.
10 Muting the microphone Themicrophonecanbeactivatedanddeactivatedduring a telephone conversation when you are in handset or handsfree mode. , Mute On Switches the microphone off (Mute). , Mute Off Switches the microphone on Ringer on/off Y oucanturnthebelloftheringeronandoff.
11 Conference calls Y oucanholdaconferencecallbetween1externaland2 internal callers. HS1: < INT , , eg 2 During an external call, dial the numberof.
12 Using the menu Using the menu Answering Machine (Pro800 Only) (see page 23) Phone book (see page 19) Priority/Default Setting If you are the main user of this telephone you should change the settings in the menu so that they are justrightforyou.
13 Using the menu Changing the Prole "Equaliser" setting or , Select"Equaliser" or , save Selectandconrm Press the keytoreturntostandby . Copy a User Prole Y oucancopyauserproletoanothercompatible, registered handset.
14 Using the menu Handset Handset Ringing melody Thereare10differentringingmelodiesavailable. , or , OpentheMenu, select"Handset" Select "Ring tone&quo.
15 Using the menu Handset name Y oucanpersonaliseyourhandsetbynamingit(max. 12 letters). , or , OpentheMenu, select"Handset" or , Select&.
16 Using the menu Conrm beep , or , OpentheMenu, select"Handset" or , Select"Conrmbeep" On The current setting is shown or , Selectandcon.
17 Using the menu Base settings Base Ringing melody Thereare10differentringingmelodiesavailable. , or , Open the Menu, select "Base settings" Select "Ring tone" 3.
18 Using the menu T ime Date/Time , or , Open the Menu, select "Time" Select "Date and Time" , save Enter the day , month and year , followed bythetimein24hourclockandconrm.
19 Phone Book Phone Book 200namesandphonenumberscanbestoredinthephone bookwithamaximumof16lettersand24digitsforeachentry . * Always enter the area dialling code with each phone bookentry .
20 Phone Book Show details Openthephonebook or Selectaphonebookentry Option, or Select "Show details" Deleting phone book entries Openthephonebook o.
21 Caller ID Caller ID Ifyousubscribetoyourtelephoneoperatorsservice (chargesmayapply), numbersoftheincomingcalls willbedisplayedonthescreenandstoredinthecall log (please consult your telephone service provider for details).
22 Caller ID Deleting calls list entries Deleting a single calls list entry Opens the calls list at most recent entry or Select an entry Option, or Select "Delete" or ConrmorCan.
23 Using the Ans wering Machine (Pro800 Only) Answering Machine (Pro800 Only) Y ouransweringmachinecanbereadyforusewithina few seconds of plugging in the telephone line cord and switching on the mains power . Justfollowthestepsinthissectiontosetupanduse your answering machine.
24 Using the Ans wering Machine (Pro800 Only) Set the date and time 2 sec Enters date and time mode Selectadayoftheweek Conrmtheday Select the hour Conrmt.
25 Using the Ans wering Machine (Pro800 Only) Listen to your messages/memos via the handset , or , Open the Menu, select "Ans Machine" or , Select"PlayNewMsgs"or"Play All Msgs" Press the keytoreturntostandby .
26 Using Remote Access (Pro800 Only) Remote Access (Pro800 Only) Y ou can call your answering machine from any T ouchtone TM phoneormobilephonewhilstyouareaway from home to listen to your messages.
27 Using Remote Access (Pro800 Only) Remote commands Digit Function 1 Rewind 2 Play/Pause 3 FastForward 4 1stOGMPlayback(Answer&Record) 5 1stOGMRecording 6 Stop 7 Delete cu.
28 Advanced Settings Advanced Settings Setting the Recall time T worecalltimingsareavailable.Short100ms(Australia) andLong600ms(NewZealand).
29 T roubleshooting T roubleshooting Problem Possible cause(s) Solution(s) Bad audio quality (crackles,echo, etc.). 1. Interference from nearby electrical appliance. 2. Base unit is installed in a room with thick walls. 3. The handset is too far from the base unit.
30 T echnical Properties T echnical properties Feature Value Standard DECT 1 GAP 2 Powersupply(base station) Input: 100~240VAC50/60Hz680mA Output: 12VDC670mA Range Outdoors Approx 300m Indoors Approx50m Standby Upto100h Max.
31 Default settings Default settings Cordless handset Thedefaultsettingscanberestoredviathemenu. Refer topage28forthesequenceofmenuoptionselections.
32 Maintenance/Guarantee Warr anty (Australia) (a ) Warranty Oricom International Pty Ltd (Oricom) warrants that the product is free from defects in materials and workmanship for a period of 12 months effective from the date of purchase.
33 Notes for operation in New Zealand The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with the minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty.
34 Index Index A AdjustingtheHandsfreevolume ....................................... 9 Adjustingthereceivervolume .......................................... 9 Answering Machine (Pro800 Only) ................................. 23 Autotalk .
35 Index Deleteasinglemessage/memo ..................................... 24 Deleteallmessages/memos .......................................... 24 Deleting a single calls list entry ...................................... 22 Deleting all calls list entries .
36 Index MemoryFull ................................................................. 25 Muting the microphone ................................................. 10 N Navigatinginthemenu .................................................... 7 NightLight .
37 Index Set the date and time .................................................... 24 Set TimeFormat ........................................................... 18 Setting the Recall time .................................................. 28 Shaker .
Australia Oricom International Pty Ltd Locked Bag 658 South Windsor, NSW 2756 Customer Support Email: support@oricom.com.au Web: www.oricom.com.au Phone: (02) 4574 8888 Fax: (02) 4574 8898 Pro_600_800.
Ein wichtiger Punkt beim Kauf des Geräts Oricom pro800 DECT (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Oricom pro800 DECT noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Oricom pro800 DECT - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Oricom pro800 DECT reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Oricom pro800 DECT erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Oricom pro800 DECT besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Oricom pro800 DECT verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Oricom pro800 DECT. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Oricom pro800 DECT gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
