Benutzeranleitung / Produktwartung 1080p DLP des Produzenten Optoma Technology
Zur Seite of 50
English 1 T ab le of c o n ten t s T able of Contents ................................................................................... 1 Usage Notice .......................................................................................... 2 Safety Information .
2 U s a g e N o t ice Safety Information The lightning flash with arrowheard within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous volt- age” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
English 3 U s a g e N o t ice Precautions Please follow all warnings, precautions and mainte- nance as recommended in this user’s guide. When the lamp reaches the end of its life, the projector will not turn back on until the lamp module has been replaced.
4 U s a g e N o t ice Do: ▀ ■ Turn off the product before cleaning. ▀ ■ Use a soft cloth moistened with mild detergent to clean the display housing. ▀ ■ Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
English 5 U s a g e N o t ice Eye Safety Warnings ▀ ■ Avoid staring directly into the projector beam at all times. ▀ ■ Minimize standing facing into the beam. Keep your back to the beam as much as possible. ▀ ■ A stick or laser pointer is recommended to avoid the need for the user to enter the beam.
6 I n t rod uct io n Product Features This product is a 1080p single chip 0.95” DLP ® projector. Out- standing features include: ▀ ■ Native 16:9 1080p DLP ® Technology ▀ ■ Complete 10-bit .
English 7 I n t rod uct io n Power Cord 1.8m IR Remote Controller Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete.
8 I n t rod uct io n 1. Control Panel 2. Zoom Lever 3. Focus Ring 4. Elevator Button (one on each side) 5. Elevator Feet 6. Zoom Lens 7. IR Receivers 8.
English 9 I n t rod uct io n Control Panel 1. Power and IR Receiver 2. Power Indicator LED 3. Lamp Indicator LED 4. Temp Indicator LED 5. Menu (On/Off) 6.
10 I n t rod uct io n Connection Ports 1. +12V Relay Connector 2. Composite Video Input Connector 3. RS232 Input Connector 4. S-Video Input Connector 5. DVI-I Input Connector (PC Digital and DVI-HDCP) 6. HDMI 1 Connector 7. HDMI 2 Connector 8. Component Video Input Connector 9.
English 11 I n t rod uct io n Remote Control 1. Power (On/Off) 2. Contrast 3. Gamma 4. Brite Mode 5. Image Shift 6. Enter 7. Four Directional Select Keys 8. Display Mode 9. Edge Mask 10. Brightness 11. Image AI 12. IRIS 13. Menu 14. Overscan 15. 4:3 16.
12 I n stall ation Connecting the Projector Due to the difference in applications for each country, some regions may have different ac- cessories. S-Video Output Video Output DVD Player, Set-top Box, HDTV receiver RGB 1. ..............................
English 13 I n stall ation Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. The Power LED will turn red. 3. Turn on the lamp by pressing “ ” button on the control panel. And the Power LED will turn blue.
14 I n stall ation Warning Indicator ▀ ■ When the “LAMP” indicator lights solid red, the projector will automatically shut itself down. Please contact your local reseller or service centre. See page 47. ▀ ■ When the “TEMP” indicator flashes red, it indicates the pro- jector has overheated.
English 15 I n stall ation Adjusting the Projected Image Adjusting the Projector’s Height Tilt-Adjustment Feet Elevator Feet The projector is equipped with elevator feet for adjusting the image height. To raise the image: 1. Press the elevator button .
16 I n stall ation L H' H (1920X1080) A B (1920X1080) W 0 (1920X1080) W 1 (1440X1080) D (1920X1080) Focus Ring Zoom Lever Adjusting the Projector’s Zoom / Focus Turn the Zoom Lever to zoom in or zoom out. To focus the image, turn the focus ring until you see a clear image.
English 17 U s e r Con t ro l s Control Panel & Remote Control There are two ways for you to control the functions: Control Panel and Remote Control. Using the Control Panel Power Refer to the “Power On/Off the Projector” section on pages 13-14.
18 U s e r Con t ro l s Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 13-14. Brightness Adjust the brightness of the image. Contrast Control the degree of difference between the lightest and darkest parts of the picture.
English 19 U s e r Con t ro l s 16:9 Scale the image at a 16:9 aspect ratio. Native The input source will be displayed without scaling. Letter-Box Enable the viewing of the letterboxed non- anamorphically enhanced movie at full screen width. Part of the original image will be lost if the image aspect ratio is less than 2.
20 U s e r Con t ro l s The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press “Menu” on the Remote Control or Control Panel.
English 21 U s e r Con t ro l s Menu Tree 1 English Current/All IRIS On/ ( 1~16 ) Off On/Off Reset Ima g e AI Menu Location SYSTEM Phase/Trackin g /H Position/V Position Y Gain/Pb Gain/Pr Gain/ Y Bias.
22 U s e r Con t ro l s Image Mode There are many factory presets optimized for various types of im- ages. Cinema: For home theater. Bright: For the brightest possible image, Use if ambient light is present. TV: For watching analogue or digital TV images.
English 23 U s e r Con t ro l s Tint Adjusts the color balance of red and green. Press the to increase the amount of green in the image. Press the to increase the amount of red in the image. Sharpness Adjusts the sharpness of the image. Press the to decrease the sharpness.
24 U s e r Con t ro l s Noise Reduction The motion Adaptive Noise Reduction reduces the amount of vis- ible noise interlaced signals. The range is from “0 ” to “5”.
English 25 U s e r Con t ro l s pre-set modes that allow the user to switch among the pre-sets to obtain different image effects. (0:Off/1:On) Color Temp. Adjust the color temperature. At cold temperature, the screen looks colder; at warm temperature, the screen looks warmer.
26 U s e r Con t ro l s Format Use this function to choose your desired aspect ratio. 4:3: This format is for 4x3 input sources not enhanced for Wide- screen TV. 16:9: This format is for 16x9 input sources, like HDTV and DVD enhanced for Widescreen TV.
English 27 U s e r Con t ro l s LBX: This format is for non-16x9, letterbox source and for users who use external 16x9 lens to display 2.35:1 aspect ratio using full resolution. Detail informations about LBX mode : 1. Some Letter-Box DVDs are not enhanced for 16x9 TVs.
28 U s e r Con t ro l s V Keystone Press the or to adjust image distortion vertically and makes a squarer image..
English 29 U s e r Con t ro l s Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred lan- guage. Press “Select (Enter)” to finalize the selection. Input Source Enable input sources.
30 U s e r Con t ro l s High Altitude Choose “On” to turn on High Altitude mode. Operates the fans at full speed continuously to allow for proper high altitude cooling of the projector. Auto Power Off Sets the interval of power-off of the system, if there is no signal input.
English 31 U s e r Con t ro l s Tint : Adjusts the color balance of red and green. Press the to increase the amount of green in the image. Press the to increase the amount of red in the image. Y Gain : Adjust the gain of Y. Pb Gain : Adjust the gain of Pb.
32 U s e r Con t ro l s Menu Location Choose the menu location on the display screen. Projection Front-Desktop The factory default setting. Rear-Desktop When you select this function, the projector reverses the image so you can project behind a translucent screen.
English 33 U s e r Con t ro l s with the most dark details revealed, vivid and bright image performed all the way. Off: The dynamic image performance manager is on standby. IRIS The iris function adjusts the contrast optically by opening and closing the lens aperture.
34 U s e r Con t ro l s 12V Trigger STD: When “STD” is selected, 12V Trigger will send 12V when projector turn on. LBX: When 12V trigger set as “LBX” -- 1. Format change to “LBX”,12V trigger port will send 12V. 2. Format is “4:3”, “16:9”, or “Native”, 12V trigger port won’t send 12V, it will be 0V.
English 35 U s e r Con t ro l s Lamp Hour Displays the cumulative lamp operating time. Lamp Remind er Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear up 30 hours before suggested replacement of lamp.
36 A pp endic es Image Problems No image appears on-screen Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. Ensure the pins of connectors are not crooked or broken.
English 37 A pp endic es 6. Select the “Change” button under the “Monitor” tab. 7. Click on “Show all devices.” Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box.
38 A pp endic es Image is out of focus Make sure the Lens cap is removed. Adjusts the Focus Ring on the projector lens. Make sure the projection screen is between the required dis- tance 4.9 to 39.4 feet (1.5 to 12.0 meters) from the projector.
English 39 A pp endic es Lamp burns out or makes a popping sound When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the “Replacing the Lamp” section on page 41.
40 A pp endic es Over temperature: Replacing the lamp: Remote Control Problems If the remote control does not work Check the operating angle for the remote control is approximately ±22.5°. Make sure there are not any obstructions between the remote con- trol and the projector.
English 41 A pp endic es Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible.
42 A pp endic es Remark : “ * ”com- pressed computer image. Compatibility Modes N ote N ote Mode Resolution V.Frequency (Hz) A Analog Digital VESA SVGA 800 x 600 60 VESA SVGA 800 x 600 72 .
English 43 A pp endic es RS232 Commands and Protocol Function List Pin no. Name I/O (From Projector Side 1 NC __ 2 RXD IN 3 TXD OUT 4 NC __ 5 GND __ 6 NC __ 7 NC __ 8 NC __ 9 NC __ RS232 Pin Assignmen.
44 A pp endic es RS232 Protocol Function List I n t e r f a c e : 9 wires RS-232C B a u d R a t e : 115200 D a t a B i t : 8 P a r i t y : none S t o p B i t s : 1 F l o w C o n t r o l : none Termina.
English 45 A pp endic es Comand Header Blan k Blan k A ddress Cod e Command Blan k Terminator 1 Header Terminator 2 S ilence/ O SD Mod e s et/ g e t V i e w e d A s F u n c t i o n D e s c r i p t i o.
46 A pp endic es Please note that dam- age resulting from incorrect installation will invalidate the war- ranty. Ceiling Mount Installation 1. To prevent damaging your projector, please use the ceil- ing mount package for installation.
English 47 A pp endic es Optoma Global Offices For service or support please contact your local office. USA 715 Sycamore Drive Tel : 408-383-3700 (English/French) Milpitas, CA 95035, USA Fax: 408-383-3702 www.optomausa.com Service : service@optoma.com Canada 5630 Kennedy Road, Mississauga, ON, L4Z 2A9, Canada Tel : 905-361-2582 www.
48 A pp endic es Taiwan 231, 台北縣新店市民權路 108 號 5 樓 R.O.C. 傳真： +886-2-2218-2313 電話： +886-2-2218-2360 www.optoma.com.tw 服務處： services@optoma.com.tw asia.optoma.com Hong Kong Unit A, 27/F Dragon Centre, 79 Wing Hong Street, Cheung Sha Wan Kowloon, Hong Kong Tel : +852-2396-8968 Fax: +852-2370-1222 www.
English 49 A pp endic es Regulation & safety notices This appendix lists the general notices of your Projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules.
50 A pp endic es Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.this device may not cause harmful interference, and 2.this device must accept any interference received, includ- ing interference that may cause undesired operation.
Ein wichtiger Punkt beim Kauf des Geräts Optoma Technology 1080p DLP (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Optoma Technology 1080p DLP noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Optoma Technology 1080p DLP - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Optoma Technology 1080p DLP reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Optoma Technology 1080p DLP erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Optoma Technology 1080p DLP besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Optoma Technology 1080p DLP verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Optoma Technology 1080p DLP. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Optoma Technology 1080p DLP gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
