Benutzeranleitung / Produktwartung H97I - PLUS des Produzenten Asus
Zur Seite of 84
M other b oar d H97I-PLUS.
ii E9289 First Edition April 2014 Copyright © 2014 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitt.
iii Contents Safety information ...................................................................................................... iv About this guide ................................................................................................
iv Safety information Electrical safety • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
v Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.
vi H97I-PLUS specifications summary (continued on the next page) CPU LGA1150 socket for 4th Generation, New 4th Generation and 5th Generation Intel ® Core™ i7 / Core™ i5 / Core™ i3, Pentium ® , and Celeron ® processors Supports 22nm CPU Supports Intel ® Turbo Boost Technology 2.
vii H97I-PLUS specifications summary Storage Intel ® H97 Express Chipset with RAID 0, 1, 5, 10 and Intel ® Rapid Storage Technology 13 support - 4 x SATA 6.
viii H97I-PLUS specifications summary ASUS unique features Interactive HomeCloud Media Streamer - Pipe music or movies from your PC to a smart TV - Media Streamer app for portable smartphone/tablet, supporting Android™ 4.
ix H97I-PLUS specifications summary Internal connectors 1 x 19-pin USB 3.0/2.0 connector supports additional 2 USB ports 1 x USB 2.0/1.1 connector supports additional 2 USB ports 1 x M.
x.
ASUS H97I-PLUS 1-1 Product introduction 1 1.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplugthepowercordfromthewallsocketbeforetouchinganycomponent.
1-2 Chapter 1: Product introduction H97I-PLUS 1.2 Motherboard overview Beforeyouinstallthemotherboard,studythecongurationofyourchassistoensurethatthe motherboardts. Unplugthepowercordbeforeinstallingorremovingthemotherboard.
ASUS H97I-PLUS 1-3 1.2.3 Motherboard layout H97I-PLUS PCIEX16 Super I/O F_PANEL AAFP CHA_FAN1 CHA_FAN2 CPU_FAN USB1112 Mini PCIe USB7-10 SPDIFO Intel I218V ASM 1442K ALC 887 64Mb BIOS 17cm(6.
1-4 Chapter 1: Product introduction 1.2.4 Layout contents 1.3 Central Processing Unit (CPU) ThismotherboardcomeswithasurfacemountLGA1150socketdesignedforthe4th G.
ASUS H97I-PLUS 1-5 1.3.1 Installing the CPU 1 2 3 A B • Uponpurchaseofthemotherboard,ensurethatthePnPcapisonthesocketand thesocketcontactsarenotbent.
1-6 Chapter 1: Product introduction A B C 5 4 1.3.2 CPU heatsink and fan assembly installation ApplytheThermalInterfaceMaterial totheCPUheatsinkandCPU before you install the heatsink and fan if necessary.
ASUS H97I-PLUS 1-7 3 4 A B B A To uninstall the CPU heatsink and fan assembly 2 1 To install the CPU heatsink and fan assembly 2 B A A B 1.
1-8 Chapter 1: Product introduction 1.4 System memory 1.4.1 Overview ThismotherboardcomeswithtwoDoubleDataRate3(DDR3)DualInlineMemoryModule (DIMM)sockets.ThegureillustratesthelocationoftheDDR3DIMMsockets: Channel Sockets ChannelA DIMM_A1 ChannelB DIMM_B1 1.
ASUS H97I-PLUS 1-9 1.4.3 Installing a DIMM 1 2 3 To remove a DIMM B A.
1-10 Chapter 1: Product introduction 1.5 Expansion slots Inthefuture,youmayneedtoinstallexpansioncards.Thefollowingsub-sectionsdescribe the slots and the expansion cards that they support. Unplugthepowercordbeforeaddingorremovingexpansioncards.
ASUS H97I-PLUS 1-11 IRQ assignments for this motherboard A B C D E F G H PCIEx16 shared shared shared shared – – – – IntelI218Vcontroller – – – – shared – – – USB2.0controller1 – – – – – – – shared USB2.
1-12 Chapter 1: Product introduction 1.7 Connectors 1.7.1 Rear panel connectors 1. PS/2 Mouse/Keyboard combo port. ThisportconnectstoaPS/2mouseorPS/2 keyboard. 2. Video Graphics Adapter (VGA) port. This15-pinportisforaVGAmonitororother VGA-compatibledevices.
ASUS H97I-PLUS 1-13 9. Optical S/PDIF Out port. Thisportconnectsanexternalaudiooutputdeviceviaan opticalS/PDIFcable. 10. USB 3.0 ports 3 and 4. These9-pinUniversalSerialBus(USB)portsconnecttoUSB 3.
1-14 Chapter 1: Product introduction 1.7.2 Internal connectors 1. Intel ® H97 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1-4) TheseconnectorsconnecttoSerialATA6.0Gb/sharddiskdrivesviaSerialATA6.0 Gb/ssignalcables.
ASUS H97I-PLUS 1-15 3. USB 3.0 connector (20-1 pin USB3_12) ThisconnectorallowsyoutoconnectaUSB3.0moduleforadditionalUSB3.0front orrearpanelports.WithaninstalledUSB3.0module,youcanenjoyallthebenetsof USB3.
1-16 Chapter 1: Product introduction 5. CPU and chassis fan connectors (4-pin CPU_FAN; 4-pin CHA_FAN1/2) Connectthefancablestothefanconnectorsonthemotherboard,ensuringthatthe black wire of each cable matches the ground pin of the connector.
ASUS H97I-PLUS 1-17 7. Front panel audio connector (10-1 pin AAFP) Thisconnectorisforachassis-mountedfrontpanelaudioI/Omodulethatsupports eitherHDAudioorlegacyAC`97audiostandard.Connectoneendofthefrontpanel audioI/Omodulecabletothisconnector.
1-18 Chapter 1: Product introduction • Forafullyconguredsystem,werecommendthatyouuseapowersupplyunit (PSU)thatcomplieswithATX12VSpecication2.0(orlaterversion)andprovidesa minimumpowerof350W.
ASUS H97I-PLUS 1-19 • SystempowerLED(2-pin+PWR_LED-) This2-pinconnectorisforthesystempowerLED.ConnectthechassispowerLED cabletothisconnector.
1-20 Chapter 1: Product introduction 1.8 Onboard buttons and switches Onboardswitchesandbuttonsallowyoutone-tuneperformancewhenworkingonabareor open-casesystem.Thisisidealforoverclockersandgamerswhocontinuallychangesettings to enhance system performance.
ASUS H97I-PLUS 1-21 1.9 Onboard LEDs 2. DRAM LED DRAMLEDcheckstheDRAMinsequenceduringmotherboardbootingprocess.Ifan errorisfound,theLEDnexttotheerrordevicewillcontinuelightinguntiltheproblem issolved.
1-22 Chapter 1: Product introduction 1.10 Software support 1.10.1 Installing an operating system ThismotherboardsupportsWindows ® 7(32/64bit),Windows ® 8(32/64bit)andWindows ® 8.1 (32/64bit)OperatingSystems(OS).
BIOS information 2 2.1 Managing and updating your BIOS Save a copy of the original motherboard BIOS le to a USB ash disk in case you need to restore the BIOS in the future.
2.1.2 ASUS EZ Flash 2 The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS‑based utility. Before you start using this utility, download the latest BIOS le from the ASUS website at www.asus.com. To update the BIOS using EZ Flash 2: 1.
Recovering the BIOS To recover the BIOS: 1. Turn on the system. 2. Insert the support DVD to the optical drive or the USB ash drive that contains the BIOS le to the USB port. 3. The utility automatically checks the devices for the BIOS le. When found, the utility reads the BIOS le and enters ASUS EZ Flash 2 utility automatically.
Booting the system in DOS environment To boot the system in DOS: 1. Insert the USB ash drive with the latest BIOS le and BIOS Updater to the USB port.
ASUSTeK BIOS Updater for DOS V1.30 [2014/01/01] Current ROM BOARD: H97I-PLUS VER: 0201 (H :00 B :00) DATE: 03/13/2014 Update ROM BOARD: Unknown VER: Unknown DATE: Unknown PATH: C: C: D: FORMAN~1 <DIR> H97IPLUS.
• The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. • Visit the ASUS website at www.
2.2.1 EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode, fan prole and boot device priority.
2.2.2 Advanced Mode The Advanced Mode provides advanced options for experienced end‑users to congure the BIOS settings. The gure below shows an example of the Advanced Mode . Refer to the following sections for the detailed congurations. To access the EZ Mode, click EzMode(F7) or press <F7>.
Menu bar The menu bar on top of the screen has the following main items: My Favorites For saving the frequently‑used system settings and conguration Main For changing the basic system congurat.
Quick Note (F9) This button above the menu bar allows you to key in notes of the activities that you have done in BIOS. • The Quick Note function does not support the following keyboard functions: delete, cut, copy and paste. • You can only use the alphanumeric characters to enter your notes.
2.2.3 QFan Control The QFan Control allows you to set a fan prole or manually congure the operating speed of your CPU and chassis fans. Click to select a fan to be configured Click to activate P.
Configuring fans manually Select Manual from the list of proles to manually congure your fans’ operating speed. To congure your fans: 1. Select the fan that you want to congure and to view its current status. 2. Click and drag the speed points to adjust the fans’ operating speed.
2.2.4 EZ Tuning Wizard EZ Tuning Wizard allows you to overclock your CPU and DRAM, computer usage, and CPU fan to their best settings. You can also easily set RAID in your system using this feature. Tuning your system settings To tune your settings: 1.
Creating RAID To create RAID: 1. Press <F11> on your keyboard or click from the BIOS screen to open EZ Tuning Wizard screen. 2. Click RAID then click Next . • Ensure that your HDDs have no existing RAID volumes. • Ensure to connect your HDDs to Intel ® SATA connectors.
2.3 My Favorites MyFavorites is your personal space where you can easily save and access your favorite BIOS items. ASUS H97I-PLUS 2-15.
Adding items to My Favorites To add BIOS items: 1. Press <F3> on your keyboard or click from the BIOS screen to open Setup Tree Map screen. 2. On the Setup Tree Map screen, select the BIOS items that you want to save in MyFavorites screen.
2.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings.
To set an administrator password: 1. Select the Administrator Password item and press <Enter>. 2. From the Create New Password box, key in a password, then press <Enter>. 3. Conrm the password when prompted. To change an administrator password: 1.
2.5 Ai T weaker menu The Ai Tweaker menu items allow you to congure overclocking‑related items. Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect eld values can cause the system to malfunction. The conguration options for this section vary depending on the CPU and DIMM model you installed on the motherboard.
The following two items appear only when you set the CPU Core Ratio to [Sync All Cores] or [Per Core] . 1-Core Ratio Limit [Auto] Select [Auto] to apply the CPU default Turbo Ratio setting or manually assign a 1‑Core Limit value, which should be higher than or equal to the 2‑Core Ratio Limit.
2.5.8 EPU Power Saving Mode [Disabled] ASUS EPU (Energy Processing Unit) sets the CPU in its minimum power consumption settings. Enable this item to set lower CPU VCCIN and Vcore voltages and achieve the best energy saving condition. Conguration options: [Disabled] [Enabled] 2.
The following item appears only when you set the CPU Power Phase Control to [Power Phase Response] . Power Phase Response [Fast] This item allows you to set a faster phase response for the CPU to increase system performance or to slower phase response to decrease DRAM power efciency.
DRAM Power Phase Control [Auto] Select [Extreme] for full phase mode to increase system performance or select [Optimized] for ASUS optimized phase tuning prole to increase DRAM power efciency. Conguration options: [Auto] [Optimized] [Extreme] 2.
CPU Internal Power Fault Control Thermal Feedback [Auto] Allows your system to take precautionary actions to protect the CPU when the thermal condition of the external regulator exceeds the threshold.
CPU Internal Power Saving Control Power Saving Level 1 Threshhold [Auto] Lower value provides sufcient overclocking tolerance to enlarge the overclocking potential. Higher value provides better power‑saving condition.Use <+> or <‑> key to adjust the value.
The following item appears only when you set the CPU Cache Voltage to [Manual Mode] . CPU Cache Voltage Override [Auto] This item allows you to set the CPU Cache Voltage override. By default, this item takes the standard value of the installed CPU. You can use the <+> or <‑> keys to adjust the value.
The following items appear only when you set the CPU Graphics Voltage to [Adaptive Mode]. Additional Turbo Mode CPU Graphics Voltage [Auto] This item appears only when you set the CPU Graphics Voltage to [Adaptive Mode] and allows you to set the additional turbo mode CPU graphics voltage.
The following item appears only when you set SVID Support to [Enabled] . SVID Voltage Override [Auto] This item allows you to set the SVID Voltage override. By default, this item takes the standard value of the installed CPU. You can use the <+> or <‑> keys to adjust the value.
2.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items.
Active Processor Cores [All] This item allows you to select the number of CPU cores to activate in each processor package. Conguration options: [All] [1] [2] [3] For some CPU types, only [ All ] and [ 1 ] appear.
CPU C-States [Auto] This item allows you to set the power saving of the CPU states. Conguration options: [Auto] [Disabled] [Enabled] The following items appear only when you set the CPU C‑States to [Enabled] . Enhanced C1 state [Enabled] This item allows your CPU to reduce power consumption when the system is in idle mode.
Active Page Threshold Support [Enabled] The system automatically goes into sleep mode when the partition size is not enough for the Intel ® Rapid Start Technology to work.
Aggressive LPM Support [Disabled] This item is designed for LPM (link power management) support with a better energy saving conditions. When disabled, the hot plug function of SATA ports are disabled. Conguration options: [Disabled] [Enabled] S.M.A.
NB PCI-E Configuration Allows you to congure the NB PCI Express settings. PCI-Ex16_1 Link Speed [Auto] Allows you to congure the PCIEx16 speed for slot 1. Conguration options: [Auto] [Gen1] [Gen2] [Gen3] Memory Configuration Allows you to congure the memory conguration parameters.
USB Single Port Control This item allows you to enable or disable the individual USB ports. Refer to section 1.2.3 Motherboard layout for the location of the USB ports. 2.6.6 Platform Misc Configuration The items in this menu allow you to congure the platform‑related features.
The following three items appear only when you set the HD Audio Controller item to [Enabled] . Front Panel T ype [HD] Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high‑denition audio depending on the audio standard that the front panel audio module supports.
Power On By PS/2 Keyboard [Disabled] [Disabled] Disables the Power On by a PS/2 keyboard. [Space Bar] Sets the Space Bar on the PS/2 keyboard to turn on the system. [Ctrl‑Esc] Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system. [Power Key] Sets Power key on the PS/2 keyboard to turn on the system.
2.7 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. 2.7.1 Qfan Tuning Click this item to automatically detect the lowest speed and congure the minimum duty cycle for each fan. 2.
The following items appear only when you set the CPU Q-Fan Control item to [ Enabled ]. CPU Fan Speed Low Limit [200 RPM] This item appears only when you enable the CPU Q‑Fan Control feature and allows you to disable or set the CPU fan warning speed.
The following items appear only when you set the Chassis Fan 1/2 Q‑Fan Control to [PWM Mode] or [DC Mode] . Chassis Fan 1/2 Q-Fan Source [CPU] This item controls the assigned fan according to the selected temperature source.
2.8 Boot menu The Boot menu items allow you to change the system boot options. 2.8.1 Fast Boot [Enabled] [Enabled] Select to accelerate the boot speed. [Disabled] Select to go back to normal boot speed. SATA Support [All Devices] [All Devices] All devices connected to SATA ports are available during POST.
PS/2 Keyboard and Mouse Support [Auto] Select any of these settings when PS/2 keyboard and mouse are installed. These settings only apply when Fast Boot is enabled. [Auto] For a faster POST time, PS/2 devices will only be available when the system boots up or rebooted when the PS/2 devices have not been reconnected or changed.
2.8.5 Option ROM Messages [Enabled] [Enabled] The third‑party ROM messages will be displayed during POST. [Disabled] Disables the ROM messages and displays only the ASUS logo during POST. 2.8.6 Interrupt 19 Capture [Disabled] This item allows you to trap Interrupt 19 by the option ROMs.
2.8.10 Secure Boot Allows you to congure the Windows ® Secure Boot settings and manage its keys to protect the system from unauthorized access and malwares during POST. OS T ype [Windows UEFI mode] Allows you to select your installed operating system.
KEK Management The KEK (Key‑exchange Key or Key Enrollment Key) manages the Signature database (db) and Revoked Signature database (dbx). Key‑exchange Key (KEK) refers to Microsoft ® Secure Boot Key‑Enrollment Key (KEK). Delete KEK Allows you to delete the KEK from your system.
Append Default dbx Select Yes to append the system default dbx or select No to append a downloaded additional dbx from a USB storage device to forbid certain customized UEFI executable les. The DBX le must be formatted as a UEFI variable structure with time‑based authenticated variable.
2.9 Tool menu The Tool menu items allow you to congure options for special functions. Select an item then press <Enter> to display the submenu. 2.9.1 ASUS EZ Flash 2 Utility Allows you to run ASUS EZ Flash 2. Press [Enter] to launch the ASUS EZ Flash 2 screen.
2.10 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus.
Appendices Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received including interference that may cause undesired operation.
Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003.
ASUS contact information ASUSTeK COMPUTER INC. Address 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 Telephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail info@asus.com.tw Web site http://www.asus.com Technical Support Telephone +86-21-3842-9911 Fax +86-21-5866-8722 ext.
EC Declaration of Confo rmity We, the undersigned, Manufacturer: ASUSTeK COMPUTER INC. Address: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAI WAN Author ized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR.
Ein wichtiger Punkt beim Kauf des Geräts Asus H97I - PLUS (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Asus H97I - PLUS noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Asus H97I - PLUS - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Asus H97I - PLUS reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Asus H97I - PLUS erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Asus H97I - PLUS besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Asus H97I - PLUS verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Asus H97I - PLUS. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Asus H97I - PLUS gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
