Benutzeranleitung / Produktwartung NFT 2100 des Produzenten Opticon
Zur Seite of 71
NFT 2100 Miniature High Speed CCD Fixed Position Barcode Scanner User’s Guide Manual No. 25-ULNFT2100-01.
Contents Section 1 Introduction and Getting Started 1 Product Overview 1 Quick Start-Up Procedure 1 Section 2 Technical Specifications 3 Physical Specifications 3 Symbologies Supported 3 Optical Speci.
Organization of this Manual This manual provides the necessary instructions for installing and using the Opticon NFT 2100 Fixed Position Scanner. The manua l is organized as follows: Section 1 Introduction and Getting Started Describes the general operation of the NFT 2100 scanner.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 1 Section 1 Introduction and Getting Started Product Overview The NFT 2100 Fixed Position Scanner is a miniature, 200 scan per second, CCD barcode reader designed to be easily incorporated into host equipment.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 2 ♦ Click on the ASCII Setup button. In the ASCII Setup Sending screen, select Line ends with line feeds and Echo typed locally so that any keyboard commands you input will appear on your screen.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 3 Section 2 Technical Specifications Physical Specifications Case Material Steel (Black) Dimensions 2.16 x 1.85 x 0.78 in (WxDxH) (55 x 47 x 20 mm) Weight 3.5 oz (100 grams) without cable Cable Length 6.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 4 ±10º ±30º Av iod th is r eg ion 1 4 . 5 1 4 . 5 α α β ±6º Skew Specified operation ( α ) at + 30º or less. (Recommended at + or - 13º) Avoid specular reflection in the dead zone (±10º).
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 5 35.4 R ±10º φ 1 4 .5 Tilt (Rotation) Specified operation ( θ ) ±10º or less. (Barcode aspect ratio must allow the field of view to cover all bars). (Recommended operation at 0º) Curvature EAN-8 / UPC-E: R = >20 mm (0.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 6 Electrical Specifications Operating Voltage +5VDC + 5% Current Operating (LEDs are ON) 130mA (max) Idle (LEDs are .
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 7 Connector Pin-outs 9 Pin D-Sub Female Connector (with power stereo jack) Pin No.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 8 Section 3 Positioning the Scanner for Optimum Performance Achieving Optimum Performance Four items greatly impact .
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 9 ±10º ±30º Av iod th is re gio n 1 4. 5 1 4 . 5 α α Readable Width or Field of View for the NFT 2100 (Field-of-View Specification Based Upon 69º Degree Sweep) 1.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 10 Measuring Scanner Performance A method for properly positioning the unit is to program the scanner for Trigger Disable (S7) and Continuous Read (S2) modes. The scanner will now be always on and will continuously read the same bar code.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 11 Tips for Verifying the Presence of a Bar Code If the scanner is operated in the “trigger enabled” mode and the trigger is activated, one of three conditions may occur: A bar code is scanned and decoded.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 12 Section 4 Configuring the Scanner Since the operation of the NFT 2100 scanners are microp rocessor controlled, it is possible to modify or program its operation to match your specific app lication.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 13 Section 5 Application Engineering Support Technical Assistance and Support Opticon is eager to help you integrate the NFT 2100 scanner into your application.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 14 OPTICON NFT-2100-I -RS232 C xxxxx x MADE IN JAPAN ****** Section 6 Scanner Labeling IEC 825-1 Class 1 LED Devices.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 15 Appendices Appendix A How to Program the Scanner Appendix B Comput er Programming Commands Appendix C Bar Co de P.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 16 Appendix A Programming the Scanner Two different methods can be used to prog ram parameters to configure the scanner: a.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 17 When the scanner is in the Programming Mode, you can change more than one parameter at a time. However, this may become confusin g. Until you become proficient at programming you may prefer to change only a few parameters at one time.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 18 Appendix B Computer Programming Commands All commands listed below must be preceded by an 'E SC' (x1B) or 'STX' (x02) character and be followed by a 'Carriage Return' (x0D) or 'ETX' (x03) character.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 19 5, IATA, & Codabar -Z Alternate decode algorithm no.1 for Code 39 Enable Disable Options for Code 39 (cont.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 20 Prefix Suffix Select Symbology for prefix/Suffix M5 O5 Codabar (NW-7) M6 O6 Industrial 2 of 5 Prefix Suffix Select Symbology for prefix/Suffix (cont.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 21 Communication Handshaking P1 Busy/Ready P2 Modem P3 ACK/NAK (1 sec tim eout with error buzzer) P4 ACK/NAK no resp.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 22 YO Margin check 1/7 nominal YP Margin check 2/7 nominal YQ Margin check 3/7 nominal YR Margin check 4/7 nominal Y.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 23 Appendix C: Bar Code Programming Menus & Commands - Index 1. Global Default & Sc anner Config uratio ns....................................... 24 2. Symbology Selectio n .
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 24 1. Global Default & Scanner Configurations Computer Command Function /Description Bar Code Command (ZZ) START.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 25 2. Symbology Selection Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 26 2. Symbology Selection (continued) Computer Command Function /Description Bar Code Command (ZZ) START/END Program.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 27 3. Add/Activate Specific Bar Code Symbologies Computer Command Function /Description Bar Code Command (ZZ) START/.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 28 3. Add/Activate Specific Bar Code Symbologies (continued) Computer Command Function /Description Bar Code Command.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 29 5. Options for UPC Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ E2 .
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 30 6. Options for EAN-8 & EAN-13 Computer Command Function /Description Bar Code Command (ZZ) START/END Programm.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 31 7. Options for Code 39 and IT Pharmaceutical Computer Command Function /Description Bar Code Command (ZZ) START/E.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 32 7. Options for Code 39 and IT Pharmaceutical (continued) Computer Command Function /Description Bar Code Command .
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 33 8. Options for Codabar (NW-7) (continued) Computer Command Function /Description Bar Code Command (ZZ) START/END .
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 34 Codabar (NW-7) Format Start Character 1 to 42 data digits Check digit Stop Character A . . . . . . . . T a . . . . . . . . t A . . . . . . . . A a . . . . . . . . a • Codabar (NW-7) has four different start/stop character schemes as shown above.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 35 9. Options for Interleaved & Industrial 2 of 5 Computer Command Function /Description Bar Code Command (ZZ) S.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 36 10. Options for IATA Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ 4.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 37 11. Options for Code-128 / EAN-128 Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ OF Disable EAN-128 only PG % JF Enable EAN-128 only KG MP Disable concatenation NQ % MO Enable concatenation NP 12.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 38 13. Setting the Character length that is allowed to be read. Computer Command Function /Description Bar Code Comm.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 39 For example, if a Code 39 label containing 2 characters were scanned in Step 3 then only Code 39 labels would be checked for a minimum length of 2 characte rs.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 40 Example : To add the alpha character “A” as a Prefix and “B” as a Suffix to UPC-A bar code data: 7. Scan “START/END Programming Mode” 8. Scan N1, representing a Prefix for UPC-A 9.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 41 15. Setting Prefixes (Identifying the Symbology) Computer Command Function /Description Bar Code Command (ZZ) STA.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 42 15. Setting Prefixes (Identifying the Symbology) (continued) Computer Command Function /Description Bar Code Comm.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 43 16. Setting Suffixes (Identifying the Symbology) Computer Command Function /Description Bar Code Command (ZZ) STA.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 44 16. Setting Suffixes (Identifying the Symbology) (continued) Computer Command Function /Description Bar Code Comm.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 45 17. Direct Input of Numeric Characters Computer Command Function /Description Bar Code Command (ZZ) START/END Pro.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 46 18. Direct Input of Alpha Characters (ZZ) START/END Program Menu [[ 0N N 1O 0A A 1B 0O O 1P 0B B 1C 0P P 1Q 0C C .
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 47 19. Direct Input of Alpha Characters (Lower Case) (ZZ) START/END Program Menu [[ $N n %O $A a %B $O o %P $B b %C .
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 48 20. Direct Input of Control Characters (ZZ) START/END Program Menu [[ 1M ^M (CR) 2N 9G ^@ (null) :H 1N ^N (SO) 2O.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 49 20. Direct Input of Control Characters (Continued) Computer Command Function /Description Bar Code Command (ZZ) S.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 50 21. Direct Input Characters Misc. (ZZ) START/END Program Menu [[ 5N - 6O 5A (SPACE) 6B 5O .
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 51 21. Direct Input Characters Misc. (Continued) Computer Command Function /Description Bar Code Command (ZZ) START/.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 52 22. Communication Parameters Computer Command Function /Description Bar Code Command (ZZ) START/END Programming M.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 53 22. Communication Parameters. (Continued) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ L5 1 Stop Bit M6 % L6 2 Stop Bits M7 23 Communication Handshaking.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 54 23. Communication Delays P4 ACK/NAK no response (100 ms timeout, terminates with good read buzzer) Q5 KA No inter.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 55 24. Buzzer Operation Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ T.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 56 25. Setting the Trigger Functions Computer Command Function /Description Bar Code Command (ZZ) START/END Programm.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 57 Mode Trigger Function Enabled (S8) Trigger Function Disabled (S7) After receiving a trigger pulse, scanner will read multiple, different bar codes in succession until it times out.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 58 27. Add-on Wait Mode (Applies to UPC/EAN only) Computer Command Function /Description Bar Code Command (ZZ) START/END Programming Menu [[ XA Disable Add-on wait mode YB XB Enable Add-on wait mode of 0.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 59 28. Scanner Timeout (Trigger Enabled Mode only) These commands, which are only applicable in the Tr igger Enabled mode, establish the time-out period after the trigger pulse is received.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 60 29. Multiple Read Reset Time This option is used in conjunction with the multiple read mode. The selected time sets the period the scanners should be pointed away from a label before that same label can be decoded again.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 61 30. Quiet Zone Options With this option the scanner can decode bar codes th at have smaller quiet zone margins than specified for the symbology. Be careful when using this option as its use may increase the possibility of partial and ghost reads.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 62 31. Redundant Decoding The Number of Redundant Decodes determines how many times the scanner must decode a bar code and obtain the same value before it will transmit the da ta.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 63 33. No read error messages. The scanner can be programmed to transmit an error message when no barcode is read. The unit must be in trigger mode, then, the error message will be sent at the end of a trigger time out.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 64 Appendix D: Dimensional Drawing (All dimensions in millimeters [inches]).
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 65 Appendix E: NFT 2100 – Optical Performance NFT 2100 Depth of Field Table (Grade A Labels) Density Min. Distance (inches) Max Distance (inches) Range (inches) 6 mil 0.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 66 Appendix F: Placement Drawing (All dimensions in millimeters [inches]) This Drawing shows one possible placement of the scanner relative to the target label. Other orientations are possible depending on barcode density and barcode length.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 67 Appendix G: Placement Drawing for test tubes (All dimensions in millimeters [inches]) This Drawing shows one possible placement of the scanner relative to the target label.
Manual No. 25-ULNFT2100-01; Mar, 2005 NFT 2100 CCD Fixed Mount Barcode Scanner Page 68 Notes.
Ein wichtiger Punkt beim Kauf des Geräts Opticon NFT 2100 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Opticon NFT 2100 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Opticon NFT 2100 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Opticon NFT 2100 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Opticon NFT 2100 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Opticon NFT 2100 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Opticon NFT 2100 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Opticon NFT 2100. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Opticon NFT 2100 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
