Benutzeranleitung / Produktwartung NFT 1125 des Produzenten Opticon
Zur Seite of 61
Users Manual Series NFT 1125/2135 Miniature CCD Fixed Position Scanners Manual No. 25-NFT1121-01 Rev. August 1999 8 Olympic Drive Orangeburg, NY 10962 T el 845.
* This page left intentionally blank for repagenation *.
Contents Section 1 Introduction and Getting Started ..................................... 1 Product Ov erview ............................................................................. 1 Quick Start-Up Procedure ....................................
* This page left intentionally blank for repagenation *.
Organization of this Manual This manual provides the necessary instructions for installation and use of Opticon NFT-1125/ 2135 Series Fixed Position Scanners. The manual is organized as follows: Section 1 Introduction and Getting Started Describes the general operation of a NFT-1125/2135 Series scanner .
* This page left intentionally blank for repagenation *.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners Section 1 Introduction and Getting Started Product Overview The NFT-1125/2135 Series Fixed Position S canners are miniature, 100/200 scans per second bar code readers designed to be easily incorporated into host equipment.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners ♦ In the Properties Settings dialog screen: Select T erminal k eys for the Function, arr ow and control key Select ANSI.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners Section 2 Technical Specifications Physical Specifications Case Material Steel, painted dark gray Dimensions (LxWxH) 1126/2126 Side View 3.0 x 2.7 x 1.1 in (76 x 68 x 76 mm) 1127/2127 Front View 2.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners Electrical Specifications Operating V oltage +5VDC + 10% Current Consumption Dynamic 40 mA typical / 80 mA maximum Static 15 mA maximum Surge 1.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners Connector Pin-Outs DB25 pin Female connector with scr ews. Environmental Specifications T emperature Operating +32 to +.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners Page 6 * This page left intentionally blank for repagenation *.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners Section 3 Positioning the Scanner Getting Optimum Performance Three items greatly impact performance: 1. Distance from the scan window to the bar code 2. Specular Reflection 3.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners Depth-of-Field Just as with a camera, the scanner has a depth-of-field. It can read bar codes that are not pr ecisely at the focal distance - maybe a little closer , or a little farther aw ay .
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners 2) Avoiding Specular Reflection Do not position the scanner at an angle that causes the LED illumination to be reflected directly back into the scanner . This is called specular reflection.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners Measuring Scanner Performance T wo methods are helpful in determining the optimum position of the scanner . The first method is to progr am the scanner for T rigger Disable and Continuous Read modes.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners Application Notes: Tips for Achieving High Throughput In some applications your primary objective may be to achiev e the highest possible throughput rate.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners Tips for Verifying the Presence of a Bar Code If the scanner is operated in the trigger enabled mode and the trigger is activ ated, one of three conditions may occur: In some applications, when no data is transmit ted, i t may be important to know why .
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners Section 4 Configuring the Scanner Since the operation of the NFT-1125/2135 Series scanner is microprocessor controlled, it is possible to modif y or program its oper ation to match your specific application.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners Page 14 * This page left intentionally blank for repagenation *.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners Section 5 Application Engineering Support Technical Assistance and Support Opticon is eager to help you integr ate the NF T-1125/2135 Series scanner into your application.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners Page 16 * This page left intentionally blank for repagenation *.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners Appendix A Programming Menus & Commands Index Introduction ......................................................................................... 18 1. Global Default & Scanner Configurations .
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners Introduction T wo different methods can be used to progr am parameters to configure the scanner: a) Programming via bar c.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners Par ameters modified by downloading software commands remain in effect only while power is supplied to the scanner . If power is interrupted or terminated, the parameters return to their original settings.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners 1. Global Default & Scanner Configurations Page 20 Comput er Command Funct i on /Descr iption Bar Code Command (Z7) S.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners 2. Symbology Selection CONTINUED ON NEXT PAGE Page 21 Computer Command Functi on /Descr iption Bar Code Command (Z7).
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners 2. Symbology Selection (continued) 3. Add/Activate Specific Bar Code Symbologies CONTINUED ON NEXT PAGE Page 22 Comput.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners 3. Add/Activate Specific Bar Code Symbologies (continued) Page 23 Comput er Comma nd Function /De s cri pt io n Bar Cod.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners 4. Delete/Deactivate Specific Bar Code Symbologies CONTINUED ON NEXT PAGE Page 24 Computer Command Fun ction /De scri .
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners 4. Delete/Deactivate Specific Bar Code Symbologies (continued) 4. Options for UPC Page 25 Computer Co mma nd Func tio n.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners 6. Options for Code 39 ♦ 43 Data digits are av ailable: 0 to 9, A to Z (caps only) plus . - $ / + % and space. If a check digit is present, it will appear as part of the data.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners 7. Options for Codabar (NW-7) Page 27 Comput er Command Fun ction /Desc riptio n Bar Code Command (Z7) START/END Prog r.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners 7. Options for Codabar (NW-7) (continued) Codabar Format ♦ Codabar has four (4) different start/stop char acter schemes as shown above. The check digit is optional and, if present, would be the last character .
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners 8. Options for 2 of 5 2 of 5 (Standard and Interleaved) Format Opticon strongly recommends that the Fixing the Number of Digits feature on the next page be emplo yed whenever 2 of 5 bar codes are used.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners 9. Options for IATA The IA T A code is a variable length symbology with an optional check digit and non-printable start/stop characters. The following char acters are supported: Digits 0 up to 9.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners 10. Fixing the Number of Digits T o avoid truncation errors, the scanner can be progr ammed to only decode bar codes of one specific length, i.e. , containing a specific number of digits.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners 11. Creating a Prefix and/or Suffix The scanner can be programmed to tr ansmit a prefix and/or suffix with the decoded data. A Prefix (or a Suffix) is composed of up to 4 characters.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners 12. Setting Prefixes (Identifying the Symbology) CONTINUED ON NEXT PAGE.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners 12. Setting Prefixes (Identifying the Symbology) (continued) 13. Setting Suffixes (Identifying the Symbology) COINTINUED ON NEXT PAGE.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners 13. Setting Suffixes (Identifying the Symbology) (continued) NOTE: The global def ault, also clears all suffixes.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners 15. Direct Input of Numeric Characters Page 36 Co mp uter Command Fun ction /D escription Bar C ode Command (Z7) START/EN.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners 15. Direct Input of Alpha Characters Page 37 (Z7) START Pro g ra m Men u ,Z7, 0N N ,0 N, 0A A , 0A, 0O O ,0O, 0B B ,0 B.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners 16. Direct Input of Control Characters 17. Enable Number of Characters/Digits Transmitted This feature instructs the scanner to calculate and tr ansmit a number indicating the total number of charac- ters that are being transmi tted to the host.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners 17. Enable Number of Characters/Digits Transmitted (continued) Page 39 (Z7) START/END Programmi ng Menu ,Z7, 3F EAN-13 .
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners 18. Disable Number of Characters/Digits Transmitted CONTINUED ON NEXT PAGE Page 40 Computer Command Fun ction /Descr i.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners 18. Disable Number of Characters/Digits Transmitted (continued) 19. Communication Parameters * Use Z2 Command after computer command to store settings in memory prior to power off .
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners 19. Communication Parameters (continued) * Use Z2 Command after computer command to store settings in memory prior to power off .
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners 20. Handshaking * Use Z2 Computer Command to store in memory prior to power off .
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners 21. Buzzer Operation * These commands are useful in v erifying that proper communication exists between the scanner and the host. They can be invok ed only via computer commands.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners 21. Buzzer Operation (continued) 22. Positive & Negative Bar Codes Page 45 Comput er Command Funct ion /De sc ri pt.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners 23. Setting the Trigger Function The T rigger function is disabled in the default setting. This means that the red scanning light is ON continuously and the scanner is always ready to r ead.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners 24. Selecting the Read Mode The operation of the scanner in the v arious read modes is described in the table below. The Continuous Read mode is helpful in positioning the scanner f or optimum reading.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners 25. Scanner Timeout (Trigger Enabled Mode only) These commands, which are only applicable in the T rigger Enabled mode, establish the time-out period after the trigger pulse is received.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners 26. Redundant Decoding The Number of Redundant Decodes determines how many times the scanner must decode a bar code and obtain the same value befo re it will transmit the data.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners 27. Transmitting Error Indications (Trigger Enabled only) Page 50 Comput er Command Funct ion /De sc ri pt ion Bar Code C.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners 28. Print Quality Adjustments Page 51 Comput er Command Fun ction /Descr i pti on Bar C ode Command (Z7) START/END Programmi ng Menu ,Z7, X4 For low er densit y, poo r prin t qua lity ba r code, e.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners Page 52 * This page left intentionally blank for repagenation *.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners Appendix B Dimensional Drawings 1126/2126 Side View Page 53 76 mm 68 mm 16 mm Vi ew Li ne 27.
Manual No. 25-NFT1121-01 Series NFT-1121/2135 Mini CCD Fixed Position Scanners 1127/2127 Front View Page 54 74 mm 68 mm 18 mm Vi ew Li ne 26 mm 10 .3 m m 20 mm 38 mm 20 mm 5.
Manual No. 25-NFT1121-01 Series NF T-1121/2135 Mini CCD Fixed P osition Scanners Appendix C Optical Performance Charts Page 55.
Ein wichtiger Punkt beim Kauf des Geräts Opticon NFT 1125 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Opticon NFT 1125 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Opticon NFT 1125 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Opticon NFT 1125 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Opticon NFT 1125 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Opticon NFT 1125 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Opticon NFT 1125 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Opticon NFT 1125. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Opticon NFT 1125 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
