Benutzeranleitung / Produktwartung H87PLUS des Produzenten Asus
Zur Seite of 136
Motherboard H87-PLUS.
ii E8190 First Edition April 2013 Copyright © 2013 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmit.
iii Contents Safety information ...................................................................................................... vi About this guide ................................................................................................
iv Chapter 3: BIOS setup 3.1 Knowing BIOS ............................................................................................ 3-1 3.2 BIOS setup program .................................................................................. 3-2 3.
v 4.3.3 EPU ............................................................................................. 4-6 4.3.4 T urboV EVO ................................................................................ 4-7 4.3.5 Fan Xpert 2 ....................
vi Safety information Electrical safety T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
vii About this guide This user guide contains the information you need when installing and conguring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports.
viii Conventions used in this guide T o ensure that you perform certain tasks properly , take note of the following symbols used throughout this manual.
ix H87-PLUS specications summary CPU LGA1 150 socket for Intel ® 4th Generation Core™ i7 / Core™ i5 / Core™ i3, Pentium ® , and Celeron ® processors Supports 22nm CPU Supports Intel ® T urbo Boost T echnology 2.0* * The Intel ® T urbo Boost T echnology 2.
x Audio Realtek ® ALC887 8-channel high denition audio CODEC - Supports Jack-Detection, multi-streaming, and front panel jack- retasking * Use a chassis with HD audio module in the front panel to support an 8-channel audio output. USB Intel ® H87 Express Chipset - supports ASUS USB 3.
xi ASUS unique features ASUS Quiet Thermal Solution - ASUS Fanless Design: Stylish Heatsink solution & MOS heatsink - ASUS Fan Xpert 2 ASUS Q-Design - ASUS Q-Slot ASUS EZ DIY - ASUS MyLogo 2 - ASU.
xii • If any of the above items is damaged or missing, contact your retailer . • The illustrations above are for reference only . Actual product specications may vary with different models. User Manual ASUS H87-PLUS motherboard User manual Support DVD 2 x Serial A T A 6.
xiii Installation tools and components 1 bag of screws Philips (cross) screwdriver PC chassis Power supply unit Intel ® LGA1 150 CPU Intel ® LGA1 150 compatible CPU Fan DIMM SA T A hard disk drive SA T A optical disc drive (optional) Graphics card (optional) The tools and components in the table above are not included in the motherboard package.
xiv.
ASUS H87-PLUS 1-1 Chapter 1 Product introduction 1 1.1 Special features 1.1.1 Product highlights LGA1 150 socket for Intel ® 4th Generation Core™ i7 / Core™ i5 / Core™ i3, Pentium ® , and Cele.
1-2 Chapter 1: Product introduction Chapter 1 S/PDIF out connector This motherboard provides convenient connectivity to external home theater audio systems via the optical S/PDIF (SONY -PHILIPS Digital Interface) out connector . The S/PDIF transfers digital audio without converting it to analog format and keeps the best signal quality .
ASUS H87-PLUS 1-3 Chapter 1 ASUS DRAM Fuse Onboard polyswitch (resettable fuse) prevents overcurrent and short-circuit damage. This extends beyond I/O ports to DRAM to safeguard the system and device lifespan. ASUS ESD Guards Electrostatic discharges (ESD) can happen suddenly , and their damaging effects are often underestimated.
1-4 Chapter 1: Product introduction Chapter 1 AI Suite 3 With its user-friendly interface, ASUS AI Suite 3 consolidates all the exclusive ASUS features into one simple-to-use software package. It allows you to supervise overclocking, energy management, fan speed control, voltage and sensor readings.
ASUS H87-PLUS 1-5 Chapter 1 ASUS Q-Slot ASUS Q-Slot is designed to speed up and simplify the DIY process to enhance your DIY experience. 1.1.6 Other special features HDMI Support High Denition Mult.
1-6 Chapter 1: Product introduction Chapter 1 1.2 Motherboard overview 1.2.1 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component.
ASUS H87-PLUS 1-7 Chapter 1 Refer to 1.2.9 Internal connectors and 2.2.1 Rear I/O connection for more information about rear panel connectors and internal connectors.
1-8 Chapter 1: Product introduction Chapter 1 Layout contents Connectors/Jumpers/Slots Page 1. Serial port connector (10-1 pin COM) 1-18 2. A TX power connectors (24-pin EA TXPWR, 8-pin EA TX12V) 1-21 3. CPU and chassis fan connectors (4-pin CPU_F AN, 4-pin CHA_F AN1-2) 1-20 4.
ASUS H87-PLUS 1-9 Chapter 1 1.2.3 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA1 150 socket designed for Intel ® 4th Generation Core™ i7 / Core™ i5 / Core™ i3, Pentium™, and Celeron™ processors. • Ensure that all power cables are unplugged before installing the CPU.
1-10 Chapter 1: Product introduction Chapter 1 Recommended memory congurations 1.2.4 System memory The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) slots. A DDR3 module is notched differently from a DDR or DDR2 module.
ASUS H87-PLUS 1-1 1 Chapter 1 Memory congurations Y ou may install 1GB, 2GB, 4GB, and 8GB unbuffered and non-ECC DDR3 DIMMs into the DIMM sockets. • Y ou may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel conguration.
1-12 Chapter 1: Product introduction Chapter 1 1.2.5 Expansion slots Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Slot No. Slot Description 1 PCIe 2.
ASUS H87-PLUS 1-13 Chapter 1 • In single VGA card mode, use the PCIe 3.0/2.0 x16_1 slot (yellow) for a PCI Express x16 graphics card to get better performance.
1-14 Chapter 1: Product introduction Chapter 1 1.2.6 Jumpers Clear RTC RAM (3-pin CLRTC) This jumper allows you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data.
ASUS H87-PLUS 1-15 Chapter 1 1.2.7 Onboard buttons Onboard buttons allow you to ne-tune performance when working on a bare or open- case system. This is ideal for overclockers and gamers who continually change settings to enhance system performance.
1-16 Chapter 1: Product introduction Chapter 1 1.2.8 Onboard LEDs 2. DRAM LED DRAM LED checks the DRAM in sequence during motherboard booting process. If an error is found , the LED next to the error device will continue lighting until the problem is solved.
ASUS H87-PLUS 1-17 Chapter 1 1.2.9 Internal connectors 1. Intel ® H87 Serial A T A 6.0 Gb/s connectors (7-pin SA T A6G_1-6) These connectors connect to Serial A T A 6.
1-18 Chapter 1: Product introduction Chapter 1 2. USB 3.0 connector (20-1 pin USB3_12) This connector allows you to connect a USB 3.0 module for additional USB 3.0 front or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benets of USB 3.
ASUS H87-PLUS 1-19 Chapter 1 5. Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this connector , then install the module to a slot opening at the back of the system chassis.
1-20 Chapter 1: Product introduction Chapter 1 6. CPU and chassis fan connectors (4-pin CPU_F AN; 4-pin CHA_F AN1-2) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector .
ASUS H87-PLUS 1-21 Chapter 1 • For a fully congured system, we recommend that you use a power supply unit (PSU) that complies with A TX 12 V Specication 2.3 (or later version) and provides a minimum power of 350 W . • DO NOT forget to connect the 4-pin/8-pin EA TX12 V power plug.
1-22 Chapter 1: Product introduction Chapter 1 • System power LED (2-pin PWR_LED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector . The system power LED lights up when you turn on the system power , and blinks when the system is in sleep mode.
ASUS H87-PLUS 2-1 Chapter 2 Basic installation 2 2.1 Building your PC system 2.1.1 Motherboard installation The diagrams in this section are for reference only . The motherboard layout may vary with models, but the installation steps are the same for all models.
2-2 Chapter 2: Basic installation Chapter 2 3. Place six screws into the holes indicated by circles to secure the motherboard to the chassis. DO NOT overtighten the screws! Doing so can damage the motherboard.
ASUS H87-PLUS 2-3 Chapter 2 2.1.2 CPU installation Ensure that you install the correct CPU designed for LGA1 150 socket only . DO NOT install a CPU designed for LGA1 155 and LGA1 156 socket on the LGA1 150 socket.
2-4 Chapter 2: Basic installation Chapter 2 2.1.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan, if necessary .
ASUS H87-PLUS 2-5 Chapter 2 T o uninstall the CPU heatsink and fan assembly.
2-6 Chapter 2: Basic installation Chapter 2 2.1.4 DIMM installation 1 2 3 T o remove a DIMM B A A.
ASUS H87-PLUS 2-7 Chapter 2 2.1.5 A TX Power connection OR.
2-8 Chapter 2: Basic installation Chapter 2 2.1.6 SA T A device connection OR.
ASUS H87-PLUS 2-9 Chapter 2 2.1.7 Front I/O Connector T o install the system panel connector USB 2.0 AAFP T o install USB 2.0 connector T o install front panel audio connector USB 3.
2-10 Chapter 2: Basic installation Chapter 2 2.1.8 Expansion Card installation T o install PCIe x16 cards T o install PCIe x1 cards T o install PCI cards.
ASUS H87-PLUS 2-1 1 Chapter 2 2.2 Motherboard rear and audio connections 2.2.1 Rear I/O connection * and **: Refer to the tables on the next page for LAN port LEDs, and audio port denitions. Rear panel connectors 1. PS/2 keyboard / mouse combo port 6.
2-12 Chapter 2: Basic installation Chapter 2 • Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under Windows ® OS environment and after the USB 3.0 driver installation. • USB 3.0 devices can only be used as data storage only .
ASUS H87-PLUS 2-13 Chapter 2 Connect to Headphone and Mic Connect to Stereo Speakers Connect to 2.1 channel Speakers 2.2.2 Audio I/O connections Audio I/O ports.
2-14 Chapter 2: Basic installation Chapter 2 Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers.
ASUS H87-PLUS 2-15 Chapter 2 Connect to 7.1 channel Speakers.
2-16 Chapter 2: Basic installation Chapter 2 2.3 Starting up for the rst time 1. After making all the connections, replace the system case cover . 2. Ensure that all switches are of f. 3. Connect the power cord to the power connector at the back of the system chassis.
ASUS H87-PLUS 3-1 Chapter 3 BIOS setup 3 3.1 Knowing BIOS The new ASUS UEFI BIOS is a Unied Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboard- only BIOS controls to enable a more exible and convenient mouse input.
3-2 Chapter 3: BIOS setup Chapter 3 3.2 BIOS setup program Use the BIOS Setup to update the BIOS or congure its parameters. The BIOS screen include navigation keys and brief onscreen help to guide you in using the BIOS Setup program.
ASUS H87-PLUS 3-3 Chapter 3 3.2.1 EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode and boot device priority .
3-4 Chapter 3: BIOS setup Chapter 3 3.2.2 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to congure the BIOS settings. The gure below shows an example of the Advanced Mode. Refer to the following sections for the detailed congurations.
ASUS H87-PLUS 3-5 Chapter 3 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (My Favorites, Ai T weaker , Advanced, Monitor , Boot, T ool, and Exit) on the menu bar have their respective menu items.
3-6 Chapter 3: BIOS setup Chapter 3 3.3 My Favorites MyFavorites is your personal space where you can easily save and access your favorite BIOS items. Adding items to My Favorites T o add frequently-used BIOS items to My Favorites: 1. Use the arrow keys to select an item that you want to add.
ASUS H87-PLUS 3-7 Chapter 3 3.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings.
3-8 Chapter 3: BIOS setup Chapter 3 Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected elds in the BIOS setup program.
ASUS H87-PLUS 3-9 Chapter 3 3.5 Ai T weaker menu The Ai T weaker menu items allow you to congure overclocking-related items. Be cautious when changing the settings of the Ai T weaker menu items. Incorrect eld values can cause the system to malfunction.
3-10 Chapter 3: BIOS setup Chapter 3 ASUS MultiCore Enhancement [Enabled] [Enabled] Default set to [Enabled] for maximum performance under XMP/Manual/ User-dened memory frequency mode.
ASUS H87-PLUS 3-1 1 Chapter 3 If you assign a value for 4-Core Ratio Limit, do not set the 1-Core Ratio Limit, 2-Core Ratio Limit, and 3-Core Ratio to [ Auto ]. CPU bus speed : DRAM speed ratio mode [Auto] Allows you to set the CPU bus speed to DRAM speed ratio mode.
3-12 Chapter 3: BIOS setup Chapter 3 Conguration options: [Auto] [1] – [31] DRAM RAS# ACT Time [Auto] Conguration options: [Auto] [1] – [63] DRAM COMMAND Mode [Auto] Conguration options: .
ASUS H87-PLUS 3-13 Chapter 3 DRAM RTL (CHB_R1D0) [Auto] Conguration options: [Auto] [1] - [63] DRAM RTL (CHB_R1D1) [Auto] Conguration options: [Auto] [1] - [63] DRAM IO-L (CHA_R0D0) [Auto] Con.
3-14 Chapter 3: BIOS setup Chapter 3 Dec_WRD Conguration options: [Auto] [0] [1] tRDWR [Auto] Conguration options: [Auto] [1] – [31] tRDWR_dr [Auto] Conguration options: [Auto] [1] – [31].
ASUS H87-PLUS 3-15 Chapter 3 CPU Power Phase Control [Standard] Allows you to set the power phase based on the CPU. Conguration options: [Auto] [Standard] [Optimized] [Extreme] [Manual Adjustment] DO NOT remove the thermal module when setting this item to [Extreme] and [Manual Adjustment] .
3-16 Chapter 3: BIOS setup Chapter 3 The following items appear only when you set the T urbo Mode to [Enabled] . T urbo Mode Parameters Long Duration Package Power Limit [Auto] Allows you to limit the T urbo Ratio’s time duration that exceeds the TDP (Thermal Design Power) for maximum performance.
ASUS H87-PLUS 3-17 Chapter 3 Power Decay Mode [Auto] Allows your system to improve the power saving mode on the Fully Integrated V oltage Regulator as the processor goes into low current state.
3-18 Chapter 3: BIOS setup Chapter 3 CPU Core V oltage [Auto] Allows you to congure the voltage amount for the processor’s cores. Increase the voltage when setting a high Core Frequency value.
ASUS H87-PLUS 3-19 Chapter 3 The following items appear only when you set the CPU Graphics V oltage to [Offset Mode] or [Adaptive Mode] . Offset Mode Sign [+] [+] T o offset the voltage by a positive value. [–] T o offset the voltage by a negative value.
3-20 Chapter 3: BIOS setup Chapter 3 The following item appears only when you set the CPU Cache V oltage to [Adaptive Mode] . Additional T urbo Mode CPU Cache V oltage [Auto] Allows you to add voltage for T urbo Mode CPU Graphics. Use the <+> or <-> keys to adjust the value.
ASUS H87-PLUS 3-21 Chapter 3 SVID V oltage Override [Auto] Allows you to set the SVID V oltage override. By default, this item takes the standard value of the installed CPU. Y ou can use the <+> or <-> keys to adjust the value. The values range from 0.
3-22 Chapter 3: BIOS setup Chapter 3 3.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect eld values can cause the system to malfunction.
ASUS H87-PLUS 3-23 Chapter 3 3.6.1 CPU Conguration The items in this menu show the CPU-related information that the BIOS automatically detects. The items in this menu may vary based on the CPU installed. Intel Adaptive Thermal Monitor [Enabled] [Enabled] Enables the overheated CPU to throttle its clock speed to cool down.
3-24 Chapter 3: BIOS setup Chapter 3 Limit CPUID Maximum [Disabled] When set to [ Enabled ], this item allows the legacy OS to boot even without support for CPUs with extended CPUID functions.
ASUS H87-PLUS 3-25 Chapter 3 CPU C3 Report [Enabled] Allows you to disable or enable the CPU C3 report to the operating system. Conguration options: [Enabled] [Disabled] CPU C6 Report [Enabled] Allows you to disable or enable the CPU C6 report to the operating system.
3-26 Chapter 3: BIOS setup Chapter 3 Intel Rapid Start T echnology [Disabled] Allows you to enable or disable Intel Rapid Start T echnology . Conguration options: [Enabled] [Disabled] The following items appear only when you set the Intel Rapid Start T echnology to [Enabled] .
ASUS H87-PLUS 3-27 Chapter 3 3.6.3 SA T A Conguration While entering Setup, the BIOS automatically detects the presence of SA T A devices. The SA T A Port items show Empty if no SA T A device is installed to the corresponding SA T A port. Scroll down to display the other BIOS items.
3-28 Chapter 3: BIOS setup Chapter 3 Aggressive LPM Support [Auto] This item appears only when you set the SA T A Mode Selection item to [AHCI] or [RAID], and allow you to enable the PCH to aggressively enter link power state.
ASUS H87-PLUS 3-29 Chapter 3 DVI Port Audio [Disabled] Allows you to enable or disable the DVI port. Conguration options: [Enabled] [Disabled] Graphics Conguration Allows you to select a primary display from iGPU, and PCIe graphical devices.
3-30 Chapter 3: BIOS setup Chapter 3 Memory Conguration Allows you to congure the memory conguration parameters. Memory Scrambler [Enabled] Allows you to enable or disable the Memory Scrambler support. Conguration options: [Enabled] [Disabled] Memory Remap [Enabled] Allows you to enable remapping the memory above 4GB.
ASUS H87-PLUS 3-31 Chapter 3 EHCI Hand-off [Disabled] [Enabled] Enables the support for operating systems without an EHCI hand-off feature. [Disabled] Disables the EHCI Hand-off support. USB Single Port Control Allows you to enable or disable the individual USB port.
3-32 Chapter 3: BIOS setup Chapter 3 3.6.7 Onboard Devices Conguration Scroll down to view the other BIOS items. HD Audio Controller [Enabled] [Enabled] Enables the High Denition Audio Controller. [Disabled] Disables the controller . The following two items appear only when you set the HD Audio Controller item to [Enabled] .
ASUS H87-PLUS 3-33 Chapter 3 Realtek LAN Controller [Enabled] [Enabled] Enables the Realtek ® LAN controller . [Disabled] Disables the Realtek ® LAN controller . The following item appears only when you set the Realtek LAN Controller item to [ Enabled ].
3-34 Chapter 3: BIOS setup Chapter 3 Deep S4 [Disabled] When enabled, the system in S4 state will further reduce power usage and will power off the USB and PS/2 devices. The system in deep S4 state can be woken up via the power button, devices in LAN, or other ways except via the USB and PS/2 devices.
ASUS H87-PLUS 3-35 Chapter 3 3.6.9 Network Stack Network Stack [Disabled] This item allows user to disable or enable the UEFI network stack. Conguration options: [Disabled] [Enabled] The following items appear only when you set the Network Stack to [Enabled] .
3-36 Chapter 3: BIOS setup Chapter 3 3.7 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Scroll down to display the other BIOS items. CPU T emperature [xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the CPU temperature.
ASUS H87-PLUS 3-37 Chapter 3 CPU Q-Fan Control [Enabled] [Disabled] Disables the CPU Q-Fan control feature. [Enabled] Enables the CPU Q-Fan control feature. The following items appear only when you set the CPU Q-Fan Control item to [ Enabled ]. CPU Fan Speed Low Limit [200 RPM] Allows you to set the low limit warning for CPU Fan speed.
3-38 Chapter 3: BIOS setup Chapter 3 The following items appear only when you set the Chassis1/2 Q-Fan Control items to [ Enabled ]. Chassis1/2 Fan Speed Low Limit [600 RPM] Allows you to disable or set the chassis fan warning speed.
ASUS H87-PLUS 3-39 Chapter 3 3.8 Boot menu The Boot menu items allow you to change the system boot options. Scroll down to display the other BIOS items. Boot Conguration Fast Boot [Enabled] [Disabled] Allows your system to go back to its normal boot speed.
3-40 Chapter 3: BIOS setup Chapter 3 PS/2 Keyboard and Mouse Support [Auto] Select any of these settings when PS/2 keyboard and mouse are installed. These settings only apply when Fast Boot is enabled.
ASUS H87-PLUS 3-41 Chapter 3 Bootup NumLock State [On] [On] Set the power-on state of the NumLock to [On] . [Off] Set the power-on state of the NumLock to [Off] . W ait For ‘F1’ If Error [Enabled] [Disabled] Disables the function. [Enabled] The system waits for the <F1> key to be pressed when error occurs.
3-42 Chapter 3: BIOS setup Chapter 3 Secure Boot Allows you to congure the Windows Secure Boot settings and manage its keys to protect the system from unauthorized access and malwares during POST . OS T ype [Windows UEFI mode] [Windows UEFI Mode] Allows you to select your installed operating system.
ASUS H87-PLUS 3-43 Chapter 3 KEK Management The KEK (Key-exchange Key or Key Enrollment Key) manages the Signature database (db) and Revoked Signature database (dbx). Key-exchange Key (KEK) refers to Microsoft ® Secure Boot Key-Enrollment Key (KEK). Delete the KEK Allows you to delete the KEK from your system.
3-44 Chapter 3: BIOS setup Chapter 3 DBX Management The dbx (Revoked Signature database) lists the forbidden images of db items that are no longer trusted and cannot be loaded. Delete the dbx Allows you to delete the dbx le from your system. Deleting the dbx exposes your system to security threats.
ASUS H87-PLUS 3-45 Chapter 3 3.9 T ools menu The T ools menu items allow you to congure options for special functions. Select an item then press <Enter> to display the submenu. 3.9.1 ASUS EZ Flash 2 Utility Allows you to run ASUS EZ Flash 2. Press [Enter] to launch the ASUS EZ Flash 2 screen.
3-46 Chapter 3: BIOS setup Chapter 3 Label Allows you to key in a label of the setup prole. Save to Prole Allows you to save the current BIOS settings to the BIOS Flash, and create a prole. Key in a prole number from one to eight, press <Enter>, and then select Y es .
ASUS H87-PLUS 3-47 Chapter 3 3.10 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. Y ou can access the EZ Mode from the Exit menu. Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus.
3-48 Chapter 3: BIOS setup Chapter 3 3.1 1 Updating BIOS The ASUS website publishes the latest BIOS versions to provide enhancements on system stability , compatibility , or performance. However , BIOS updating is potentially risky . If there is no problem using the current version of BIOS, DO NOT manually update the BIOS.
ASUS H87-PLUS 3-49 Chapter 3 3.1 1.2 ASUS EZ Flash 2 ASUS EZ Flash 2 allows you to update the BIOS without having to use a bootable oppy disk or an OS-based utility . Before you start using this utility , download the latest BIOS from the ASUS website at www .
3-50 Chapter 3: BIOS setup Chapter 3 • This function can support devices such as a USB ash disk with F A T 32/16 format and single partition only . • DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! Ensure to load the BIOS default settings to ensure system compatibility and stability .
ASUS H87-PLUS 3-51 Chapter 3 3.1 1.4 ASUS BIOS Updater The ASUS BIOS Updater allows you to update the BIOS in DOS environment. This utility also allows you to copy the current BIOS le that you can use as a backup when the BIOS fails or gets corrupted during the updating process.
3-52 Chapter 3: BIOS setup Chapter 3 3. When the Make Disk menu appears, select the FreeDOS command prompt item by pressing the item number . 4. At the FreeDOS prompt, type d: and press <Enter> to switch the disk from Drive C (optical drive) to Drive D (USB ash drive).
ASUS H87-PLUS 3-53 Chapter 3 4. Select Y es and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS Updater . Restart your computer . DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! • For BIOS Updater version 1.
3-54 Chapter 3: BIOS setup Chapter 3.
ASUS H87-PLUS 4-1 Chapter 4 Software support 4 If Autorun is NOT enabled in your computer , browse the contents of the support DVD to locate the le ASSETUP .
4-2 Chapter 4: Software support Chapter 4 4.2.2 Obtaining the software manuals The software manuals are included in the support DVD. Follow the instructions below to get the necessary software manuals. The software manual les are in Portable Document Format (PDF).
ASUS H87-PLUS 4-3 Chapter 4 4.3 Software information Most of the applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme le that came with the software application for more information.
4-4 Chapter 4: Software support Chapter 4 AI Suite 3 main menu bar • The screenshots of AI Suite 3 in this user manual are for reference only . The actual screenshots vary with models. • Refer to the software manual in the support DVD or visit the ASUS website at www .
ASUS H87-PLUS 4-5 Chapter 4 1 CPU Load-line Calibration It allows you to adjust the voltage range to control the CPU Load-line. Adjust to a high value for system performance or to a low value for power efciency . 2 CPU Current Capability CPU Current Capability provides wider total power range for overclocking.
4-6 Chapter 4: Software support Chapter 4 4.3.3 EPU EPU is an enery-saving utility that allows you to adjust the CPU, GPU, and Fan Control settings to their power-saving conditions.
ASUS H87-PLUS 4-7 Chapter 4 4.3.4 T urboV EVO ASUS T urboV EVO allows you to manually adjust the CPU frequency , CPU Cache and Core frequencies, and related voltages for an enhanced system stability and boost performance. It also provides the Auto T uning function that offers automatic and easy overclocking and system level up.
4-8 Chapter 4: Software support Chapter 4 V oltage Drag to adjust CPU Core V oltage offset Drag to adjust CPU Cache V oltage offset Click to undo all the changes Click to apply all the changes Click t.
ASUS H87-PLUS 4-9 Chapter 4 4.3.5 Fan Xpert 2 Fan Xpert 2 automatically detects and tweaks the fan speeds, and provides you with optimized fan settings based on the fans’ specications and positions. T o launch Fan Xpert 2, click Fan Xpert 2 on the AI Suite 3 main menu bar.
4-10 Chapter 4: Software support Chapter 4 RPM Mode RPM Mode allows you to set the fan speed when the CPU temperature is below 75 o C. • When the CPU temperature reaches 75 o C, the fan will automatically run at full speed to protect the CPU.
ASUS H87-PLUS 4-1 1 Chapter 4 4.3.6 USB 3.0 Boost USB 3.0 Boost technology supports UASP (USB Attached SCSI Protocol) that automatically speeds up the transfer rates of your USB storage devices. T o launch USB 3.0 Boost, click USB 3.0 Boost on the AI Suite 3 main menu bar.
4-12 Chapter 4: Software support Chapter 4 4.3.7 Network iControl Network iControl is a one-stop setup network control center that allows you to manage your network bandwidth and set the bandwidth priority for your running programs. T o launch Network iControl, click Network iControl on the AI Suite 3 main menu bar.
ASUS H87-PLUS 4-13 Chapter 4 4.3.8 EZ Update EZ Update is a utility that allows you to automatically update your motherboard’s softwares, drivers and the BIOS version easily . With this utlity , you can also manually update the saved BIOS and select a boot logo when the system goes into POST .
4-14 Chapter 4: Software support Chapter 4 4.3.9 System Information This utility allows you get the detailed information of the motherboard, CPU, and memory settings. T o launch System Information, click System Information on the AI Suite 3 main menu bar.
ASUS H87-PLUS 4-15 Chapter 4 Viewing the SPD information From the System Information screen, click SPD tab to view the memory’s information. 4.3.10 Audio congurations The Realtek ® audio CODEC provides 8-channel audio capability to deliver the ultimate audio experience on your computer .
4-16 Chapter 4: Software support Chapter 4 Conguration option tabs (vary with the audio devices connected) Advanced settings Set default device button Control settings panel Analog and digital conn.
ASUS H87-PLUS 4-17 Chapter 4 4.3.1 1 ASUS Boot Setting ASUS Boot Setting utility allows you to quickly enter the BIOS setup with a click of the DirectBIOS button.
4-18 Chapter 4: Software support Chapter 4 Using Advanced setup Advanced setup allows you to set the bootup process of your system. There are two settings to boot up your system: Fast Boot and Next boot after AC power loss . Enabling or disabling Fast Boot This setting allows you to quickly boot your system.
ASUS H87-PLUS 5-1 Chapter 5 RAID support 5 5.1 RAID congurations The motherboard supports the following SA T A RAID solutions: • Intel ® Rapid Storage T echnology with RAID 0, RAID 1, RAID 10 and RAID 5 support.
5-2 Chapter 5: RAID congurations Chapter 5 5.1.2 Installing Serial A T A hard disks The motherboard supports Serial A T A hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array .
ASUS H87-PLUS 5-3 Chapter 5 5.1.4 Intel ® Rapid Storage T echnology Option ROM utility T o enter the Intel ® Rapid Storage T echnology Option ROM utility: 1. T urn on the system. 2. During POST , press <Ctrl> + <I> to display the utility main menu.
5-4 Chapter 5: RAID congurations Chapter 5 Creating a RAID set T o create a RAID set: 1. From the utility main menu, select 1. Create RAID V olume and press <Enter>. The following screen appears: 2. Enter a name for the RAID set and press <Enter>.
ASUS H87-PLUS 5-5 Chapter 5 5. Use the up/down arrow key to select a drive, and then press <Space> to select. A small triangle marks the selected drive. Press <Enter> after completing your selection. 6. Use the up/down arrow key to select the stripe size for the RAID array (for RAID 0, 10 and 5 only),and then press <Enter>.
5-6 Chapter 5: RAID congurations Chapter 5 Deleting a RAID set Be cautious when deleting a RAID set. Y ou will lose all data on the hard disk drives when you delete a RAID set. T o delete a RAID set: 1. From the utility main menu, select 2. Delete RAID V olume and press <Enter>.
ASUS H87-PLUS 5-7 Chapter 5 Exiting the Intel ® Rapid Storage T echnology Option ROM utility T o exit the utility: 1. From the utility main menu, select 5. Exit , and then press <Enter>. The following warning message appears: A re y ou s ur e yo u wa n t to exit? ( Y/ N) : [ CONFIRM EXIT ] 5.
5-8 Chapter 5: RAID congurations Chapter 5 5.2.2 Creating a RAID driver disk in Windows ® T o create a RAID driver disk in Windows ® : 1. Start Windows ® . 2. Plug the USB oppy disk drive and insert a oppy disk. 3. Place the motherboard support DVD into the optical drive.
ASUS H87-PLUS A-1 Appendices Appendices Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference.
A-2 Appendices Appendices Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
ASUS H87-PLUS A-3 Appendices ASUS contact information ASUST eK COMPUTER INC. Address 15 Li-T e Road, Peitou, T aipei, T aiwan 1 1259 T elephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail info@asus.com.tw Web site www .asus.com.tw T echnical Support T elephone +86-21-3842991 1 Online support support.
A-4 Appendices Appendices EC Declaration of Conformity We, the undersigned, Manufacturer: ASUSTeK COMPUTER INC. Address, City: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Country: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR.
Ein wichtiger Punkt beim Kauf des Geräts Asus H87PLUS (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Asus H87PLUS noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Asus H87PLUS - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Asus H87PLUS reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Asus H87PLUS erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Asus H87PLUS besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Asus H87PLUS verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Asus H87PLUS. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Asus H87PLUS gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
