Benutzeranleitung / Produktwartung H87I-PLUS des Produzenten Asus
Zur Seite of 74
Motherboard H87I-PLUS.
ii E8210 First Edition April 2013 Copyright © 2013 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmit.
iii Contents Safety information ...................................................................................................... iv About this guide ................................................................................................
iv Safety information Electrical safety T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
v Where to nd more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.
vi (continued on the next page) H87I-PLUS specications summary CPU LGA1 150 socket for Intel ® 4th Generation Core TM i7/ i5 / i3, Pentium ® , Celeron ® Processors Supports 22nm CPU Supports Intel ® T urbo Boost T echnology 2.0* * The Intel ® T urbo Boost T echnology 2.
vii H87I-PLUS specications summary USB 6 x USB 3.0/2.0 ports (4 ports at back panel, [blue], 2 ports at mid-board) 8 x USB 2.0/1.1 ports (4 ports at back panel, [black], 4 ports at mid-board) ASUS .
viii H87I-PLUS specications summary Specications are subject to change without notice. Internal I/O connectors/ buttons/switches 1 x USB 3.0/2.0 connector supports additional 2 USB 3.0/2.0 ports (19-pin) 2 x USB 2.0/1.1 connectors support additional 4 USB 2.
ASUS H87I-PLUS 1-1 Product introduction 1 1.1 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component.
1-2 Chapter 1: Product introduction H87I-PLUS Place this side towards the rear of the chassis 1.2.3 Motherboard layout S U L P - I 7 8 H PCIEX16 Super I/O F_PANEL AAFP ATX12V EATXPWR CPU_FAN CHA_FAN USB1112 USB78 USB910 USB34 Intel I217 ASM 1442 ALC 887 8MB BIOS SB_PWR 17cm(6.
ASUS H87I-PLUS 1-3 1.3 Central Processing Unit (CPU) This motherboard comes with a surface mount LGA1 150 socket designed for the Intel ® 4th generation Core™ i7 / Core™ i5 / Core™ i3, Pentium ® , Celeron ® processors. H87I-PLUS H87I-PLUS CPU socket LGA1150 1.
1-4 Chapter 1: Product introduction 1.3.1 Installing the CPU 1 2 3 A B A B C 4 5.
ASUS H87I-PLUS 1-5 1.3.2 CPU heatsink and fan assembly installation T o install the CPU heatsink and fan assembly 2 B A A B 1 Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary .
1-6 Chapter 1: Product introduction 1.4 System memory 1.4.1 Overview This motherboard comes with two Double Data Rate 3 (DDR3) Dual Inline Memory Module (DIMM) sockets. A DDR3 module has the same physical dimensions as a DDR2 DIMM but is notched differently to prevent installation on a DDR2 DIMM socket.
ASUS H87I-PLUS 1-7 • Y ou may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel conguration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.
1-8 Chapter 1: Product introduction A DIMM is keyed with a notch so that it ts in only one direction. DO NOT force a DIMM into a socket in the wrong direction to avoid damaging the DIMM. 3. Firmly insert the DIMM into the socket until the retaining clips snap back in place and the DIMM is properly seated.
ASUS H87I-PLUS 1-9 1.5.1 Installing an expansion card T o install an expansion card: 1. Before installing the expansion card, read the documentation that came with it and make the necessary hardware settings for the card. 2. Remove the system unit cover (if your motherboard is already installed in a chassis).
1-10 Chapter 1: Product introduction 1.6 Jumpers Clear RTC RAM (3-pin CLRTC) This jumper allows you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data.
ASUS H87I-PLUS 1-1 1 1.7 Connectors 1.7.1 Rear panel connectors 1. PS/2 Keyboard/Mouse combo port. This port is for a PS/2 keyboard/mouse. 2. Optical S/PDIF Out port. This port connects an external audio output device via an optical S/PDIF cable 3. Video Graphics Adapter (VGA) port.
1-12 Chapter 1: Product introduction 8. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1 devices. 9. USB 3.0 ports 1 and 2. These two 9-pin Universal Serial Bus (USB) ports connect to USB 3.0/2.0 devices. 10.
ASUS H87I-PLUS 1-13 1.7.2 Internal connectors 1. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector .
1-14 Chapter 1: Product introduction 3. CPU and chassis fan connectors (4-pin CPU_F AN, 4-pin CHA_F AN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector .
ASUS H87I-PLUS 1-15 • We recommend that you use an A TX 12V Specication 2.0-compliant power supply unit (PSU) with a minimum of 300W power rating. This PSU type has 24-pin and 4-pin power plugs. • DO NOT forget to connect the 4-pin A TX +12V power plug.
1-16 Chapter 1: Product introduction 7. USB 2.0 connectors (10-1 pin USB78, USB1 1 12) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis.
ASUS H87I-PLUS 1-17 9. System panel connector (20-8 pin P ANEL) This connector supports several chassis-mounted functions. S U L P - I 7 8 H PIN 1 PWR_BTN GND PWR PWR_LED- PWR_LED+ (NC) HWRST# Ground .
1-18 Chapter 1: Product introduction 1.8 Onboard LEDs 1. Standby Power LED The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component.
ASUS H87I-PLUS 1-19 1.9 Software support 1.9.1 Installing an operating system This motherboard supports Windows ® 7 (32bit/64bit) and Windows ® 8 (32bit/64bit) Operating Systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware.
ASUS H87I-PLUS 2-1 2.1 Managing and updating your BIOS Save a copy of the original motherboard BIOS le to a USB ash disk in case you need to restore the BIOS in the future.
2-2 Chapter 2: Getting started 2.1.2 ASUS EZ Flash 2 The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based utility . Before you start using this utility , download the latest BIOS le from the ASUS website at www .asus.
ASUS H87I-PLUS 2-3 2.1.3 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process. Y ou can restore a corrupted BIOS le using the motherboard support DVD or a USB ash drive that contains the updated BIOS le.
2-4 Chapter 2: Getting started Booting the system in DOS environment 1. Insert the USB ash drive with the latest BIOS le and BIOS Updater to the USB port. 2. Boot your computer . When the ASUS Logo appears, press <F8> to show th e BIOS Boot Device Select Menu .
ASUS H87I-PLUS 2-5 3. Press <T ab> to switch between screen elds and use the <Up/Down/Home/End> keys to select the BIOS le and press <Enter>. BIOS Updater checks the selected BIOS le and prompts you to conrm BIOS update. 4.
2-6 Chapter 2: Getting started 2.2 BIOS setup program Use the BIOS Setup program to update the BIOS or congure its parameters. The BIOS screens include navigation keys and brief online help to guide you in using the BIOS Setup program.
ASUS H87I-PLUS 2-7 • The boot device options vary depending on the devices you installed to the system. • The Boot Menu(F8) button is available only when the boot device is installed to the system.
2-8 Chapter 2: Getting started Navigation keys General help Menu bar Submenu item Conguration elds Menu items Pop-up window Back button Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items.
ASUS H87I-PLUS 2-9 Submenu items A greater than sign (>) before each item on any menu screen means that the item has a submenu. T o display the submenu, select the item and press <Enter>. Pop-up window Select a menu item and press <Enter> to display a pop-up window with the conguration options for that item.
2-10 Chapter 2: Getting started Adding items to My Favorites T o add frequently-used BIOS items to My Favorites: 1. Use the arrow keys to select an item that you want to add. When using a mouse, hover the pointer to the item. 2. Press <F4> on your keyboard or right-click on your mouse to add the item to My Favorites page.
ASUS H87I-PLUS 2-1 1 2.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings.
2-12 Chapter 2: Getting started Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected elds in the BIOS setup program.
ASUS H87I-PLUS 2-13 2.5 Ai T weaker menu The Ai T weaker menu items allow you to congure overclocking-related items. Be cautious when changing the settings of the Ai T weaker menu items.
2-14 Chapter 2: Getting started Scroll down to display the following items: Scroll down to display the following items: T arget CPU T urbo-Mode Speed : xxxxMHz Displays the target CPU T urbo-Mode speed. T arget DRAM Speed : xxxxMHz Displays the target DRAM speed.
ASUS H87I-PLUS 2-15 T arget CPU Graphics Speed : xxxxMHz Displays the target CPU Graphics speed. 2.5.1 Ai Overclock T uner [Auto] Allows you to select the CPU overclocking options to achieve the desired CPU internal frequency . Select any of these preset overclocking conguration options: [Auto] Loads the optimal settings for the system.
2-16 Chapter 2: Getting started 4-Core Ratio Limit [Auto] This item becomes congurable only when the CPU Core Ratio is set to [Per Core] and allows you to set the 4 Core Ratio Limit. Select [Auto] to apply the CPU default T urbo Ratio setting or manually assign a 4-Core Ratio Limit value that is higher than or equal to the 3- Core Ratio Limit.
ASUS H87I-PLUS 2-17 2.5.1 1 DRAM Timing Control The sub-items in this menu allow you to set the DRAM timing control features. Use the <+> and <-> keys to adjust the value. T o restore the default setting, type [auto] using the keyboard and press <Enter>.
2-18 Chapter 2: Getting started CPU Current Capability [Auto] Allows you to congure the total power range, and extends the overclocking frequency range simultaneously . Conguration options: [Auto] [100%] [1 10%] [120%] [130%] [140%] Choose a higher value when overclocking, or under a high CPU loading for extra power support.
ASUS H87I-PLUS 2-19 CPU Internal Power Fault Control Thermal Feedback [Auto] Allows your system to take precautionary actions to be taken by the CPU when the thermal conditions of the external regulator exceeds the threshold.
2-20 Chapter 2: Getting started Power Saving Level 2 Threshold [Auto] Lower value provides sufcient overclocking tolerance to enlarge the overclocking potential. Higher value provides better power-saving condition.Use <+> and <-> key to adjust the value.
ASUS H87I-PLUS 2-21 2.5.16 CPU Cache V oltage [Auto] Allows you to congure the amount of voltage fed to the uncore of the processor including its cache. Increase the voltage when increasing Ring frequency . Conguration options: [Auto] [Manual Mode] [Offset Mode] [Adaptive Mode] [ Adaptive Mode ] is available for some specic CPU types.
2-22 Chapter 2: Getting started The following items appear only when you set the CPU Graphics V oltage to [Offset Mode] or [Adaptive Mode] . Offset Mode Sign [+] [+] T o offset the voltage by a positive value. [–] T o offset the voltage by a negative value.
ASUS H87I-PLUS 2-23 CPU Digital I/O V oltage Offset [Auto] Allows you to congure the amount of voltage fed to the digital portion of the I/O on the processor . Increase the amount of voltage when increasing DRAM frequency . Use the <+> or <-> keys to adjust the value.
2-24 Chapter 2: Getting started 2.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect eld values can cause the system to malfunction.
ASUS H87I-PLUS 2-25 2.6.1 CPU Conguration Intel Adaptive Thermal Monitor [Enabled] [Enabled] Enables the overheated CPU to throttle its clock speed to cool down.
2-26 Chapter 2: Getting started CPU Power Management Conguration This item allows you to manage and congure the CPU’s power . Enhanced Intel SpeedStep T echnology [Enabled] Allows your system to adjust the processor ’s voltage and cores frequency , resulting in decreased power consumption and heat production.
ASUS H87I-PLUS 2-27 DMI Link ASPM Control [Auto] Allows you to control the ASPM (Active State Power Management) on both Northbridge side and Southbridge side of the DMI Link. Conguration options: [Disabled] [Enabled] [Auto] ASPM Support [Disabled] Allows you to set the ASPM level.
2-28 Chapter 2: Getting started 2.6.3 SA T A Conguration While entering Setup, the BIOS automatically detects the presence of SA T A devices. The SA T A Port items show Not Present if no SA T A device is installed to the corresponding SA T A port. SA T A Mode Selection [AHCI] Allows you to set the SA T A conguration.
ASUS H87I-PLUS 2-29 Graphics Conguration Allows you to select a primary display from iGPU, and PCIe graphical devices. Primary Display [Auto] Allows you to select which of the iGPU/PCIE Graphics device for Primary Display .
2-30 Chapter 2: Getting started 2.6.5 USB Conguration The items in this menu allow you to change the USB-related features. The USB Devices item shows the auto-detected values. If no USB device is detected, the item shows None . Legacy USB Support [Enabled] [Enabled] Enables the support for USB devices on legacy operating systems (OS).
ASUS H87I-PLUS 2-31 2.6.7 Onboard Devices Conguration HD Audio Controller [Enabled] [Enabled] Enables the High Denition Audio Controller. [Disabled] Disables the controller . The following two items appear only when you set the HD Audio Controller item to [Enabled] .
2-32 Chapter 2: Getting started [Ctrl-Esc] Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system. [Power Key] Sets Power key on the PS/2 keyboard to turn on the system. This feature requires an A TX power supply that provides at least 1A on the +5VSB lead.
ASUS H87I-PLUS 2-33 2.7 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Scroll down to display the following items: 2.7.1 CPU T emperature [xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the CPU temperature.
2-34 Chapter 2: Getting started 2.7.3 CPU Input V oltage (VCCIN), 3.3V V oltage, 5V V oltage, 12V V oltage The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. Select Ignore if you do not want to detect this item.
ASUS H87I-PLUS 2-35 Chassis Fan Speed Low Limit [600 RPM] This item appears only when you enable the Chassis Q-Fan Control feature and allows you to disable or set the Chassis fan warning speed.
2-36 Chapter 2: Getting started 2.8 Boot menu The Boot menu items allow you to change the system boot options. Scroll down to display the following items:.
ASUS H87I-PLUS 2-37 2.8.1 Boot Conguration Fast Boot [Enabled] [Disabled] Allows your system to go back to its normal boot speed. [Enabled] Allows your system to accelerate the boot speed. The following four items appear only when you set Fast Boot to [Enabled] .
2-38 Chapter 2: Getting started Post Delay Time [3 sec] This item appears only when you set the Boot Logo Display item to [Enabled]. This item allows you to select a desired additional POST waiting time to easily enter the BIOS Setup. Y ou can only execute the POST delay time during normal boot.
ASUS H87I-PLUS 2-39 The following four items appear when you set Launch CSM to [Enabled] . Boot Devices Control [UEFI and L...] Allows you to select the type of devices that you want to boot. Conguration options: [UEFI and Legacy OpROM] [Legacy OpROM only] [UEFI only] Boot from Network Devices [Legacy OpR.
2-40 Chapter 2: Getting started Load PK from File Allows you to load the downloaded PK from a USB storage device. [Y es] Load the default PK. [Enabled] Load from a USB storage device. The PK le must be formatted as a UEFI variable structure with time-based authenticated variable.
ASUS H87I-PLUS 2-41 The db le must be formatted as a UEFI variable structure with time-based authenticated variable. dbx Management The dbx (Revoked Signature database) lists the forbidden images of db items that are no longer trusted and cannot be loaded.
2-42 Chapter 2: Getting started 2.9 T ools menu The T ools menu items allow you to congure options for special functions. Select an item then press <Enter> to display the submenu. 2.9.1 ASUS EZ Flash 2 Utility Allows you to run ASUS EZ Flash 2.
ASUS H87I-PLUS 2-43 2.10 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. Y ou can access the EZ Mode from the Exit menu. Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus.
H87I-PLUS A-1 Appendices Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received including interference that may cause undesired operation.
A-2 Appendices Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
H87I-PLUS A-3 ASUS contact information ASUST eK COMPUTER INC. Address 15 Li-T e Road, Peitou, T aipei, T aiwan 1 1259 T elephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail info@asus.com.tw Web site www .asus.com.tw T echnical Support T elephone +86-21-3842991 1 Online support support.
A-4 Appendices DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Responsible Party Name: Asus Computer International Address: 800 Corporate Way, Fremont , CA 94539.
Ein wichtiger Punkt beim Kauf des Geräts Asus H87I-PLUS (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Asus H87I-PLUS noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Asus H87I-PLUS - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Asus H87I-PLUS reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Asus H87I-PLUS erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Asus H87I-PLUS besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Asus H87I-PLUS verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Asus H87I-PLUS. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Asus H87I-PLUS gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
