Benutzeranleitung / Produktwartung H81IPLUS des Produzenten Asus
Zur Seite of 74
Motherboard H81I-PLUS.
ii E8425 First Edition July 2013 Copyright © 2013 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitt.
iii Contents Safety information ...................................................................................................... iv About this guide ................................................................................................
iv Safety information Electrical safety T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
v Where to nd more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.
vi (continued on the next page) H81I-PLUS specications summary CPU LGA1 150 socket for Intel ® 4th Generation Core TM i7/ i5 / i3, Pentium ® , Celeron ® Processors Supports 22nm CPU Supports Intel ® T urbo Boost T echnology 2.0* * The Intel ® T urbo Boost T echnology 2.
vii H81I-PLUS specications summary USB 4 x USB 3.0/2.0 ports (2 ports at back panel, 2 ports at mid-board) 8 x USB 2.0/1.1 ports (4 ports at back panel, 4 ports at mid-board) ASUS unique features A.
viii H81I-PLUS specications summary Specications are subject to change without notice. Internal I/O connectors/ buttons/switches 1 x USB 3.0/2.0 connector supports additional 2 USB 3.0/2.0 ports 2 x USB 2.0/1.1 connectors support additional 4 USB 2.
ASUS H81I-PLUS 1-1 Product introduction 1 1.1 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component.
1-2 Chapter 1: Product introduction H81I-PLUS Place this side towards the rear of the chassis 1.2.3 Motherboard layout USB1112 USB910 H81I-PLUS ATX12V AUDIO LAN_USB34 USB1112 USB910 USB3_E12 DVI_VGA HDMI KBMS_USB56 ASM 1042 ASM 1042 RTL 8111GR ALC 887 AAFP Super I/O CLRTC 17.
ASUS H81I-PLUS 1-3 Unplug all power cables before installing the CPU. • Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components.
1-4 Chapter 1: Product introduction 1.3.1 Installing the CPU 1 2 3 A B A B C 4 5 Ensure that you install the correct CPU designed for LGA 1 150 only . DO NOT install a CPU designed for LGA1 155 and LGA1 156 sockets on the LGA1 150 socket.
ASUS H81I-PLUS 1-5 1.3.2 CPU heatsink and fan assembly installation T o install the CPU heatsink and fan assembly 2 B A A B 1 Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary .
1-6 Chapter 1: Product introduction 1.4 System memory 1.4.1 Overview This motherboard comes with two Double Data Rate 3 (DDR3) Dual Inline Memory Module (DIMM) sockets. A DDR3 module has the same physical dimensions as a DDR2 DIMM but is notched differently to prevent installation on a DDR2 DIMM socket.
ASUS H81I-PLUS 1-7 • Y ou may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel conguration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.
1-8 Chapter 1: Product introduction A DIMM is keyed with a notch so that it ts in only one direction. DO NOT force a DIMM into a socket in the wrong direction to avoid damaging the DIMM. 3. Firmly insert the DIMM into the socket until the retaining clips snap back in place and the DIMM is properly seated.
ASUS H81I-PLUS 1-9 1.5.1 Installing an expansion card T o install an expansion card: 1. Before installing the expansion card, read the documentation that came with it and make the necessary hardware settings for the card. 2. Remove the system unit cover (if your motherboard is already installed in a chassis).
1-10 Chapter 1: Product introduction 1.6 Jumpers Clear RTC RAM (3-pin CLRTC) This jumper allows you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data.
ASUS H81I-PLUS 1-1 1 1.7 Connectors 1.7.1 Rear panel connectors 1. PS/2 Keyboard/Mouse combo port. This port is for a PS/2 keyboard/mouse. 2. Video Graphics Adapter (VGA) port. This 15-pin port is for a VGA monitor or other VGA-compatible devices. 3. LAN (RJ-45) port.
1-12 Chapter 1: Product introduction 7. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1 devices. 8. USB 3.0 ports 1 and 2. These two 9-pin Universal Serial Bus (USB) ports connect to USB 3.0/2.0 devices. • Due to USB 3.
ASUS H81I-PLUS 1-13 1.7.2 Internal connectors 1. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector .
1-14 Chapter 1: Product introduction 3. CPU and chassis fan connectors (4-pin CPU_F AN and 4-pin CHA_F AN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector .
ASUS H81I-PLUS 1-15 • We recommend that you use an A TX 12V Specication 2.0-compliant power supply unit (PSU) with a minimum of 350W power rating. This PSU type has 24-pin and 4-pin power plugs. • DO NOT forget to connect the 4-pin A TX +12V power plug.
1-16 Chapter 1: Product introduction 7. USB 2.0 connectors (10-1 pin USB910, USB1 1 12) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis.
ASUS H81I-PLUS 1-17 9. System panel connector (10-1 pin F_P ANEL) This connector supports several chassis-mounted functions. H81I-PLUS PIN 1 PWR BTN GND PWR PLED- PLED+ (NC) Reset Ground HDD_LED- HDD_.
1-18 Chapter 1: Product introduction 1.8 Onboard LEDs 1. Standby Power LED The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component.
ASUS H81I-PLUS 1-19 1.9 Software support 1.9.1 Installing an operating system This motherboard supports Windows ® 7 (32bit/64bit) and Windows ® 8 (32bit/64bit) Operating Systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware.
1-20 Chapter 1: Product introduction.
ASUS H81I-PLUS 2-1 2.1 Managing and updating your BIOS Save a copy of the original motherboard BIOS le to a USB ash disk in case you need to restore the BIOS in the future.
2-2 Chapter 2: Getting started 2.1.2 ASUS EZ Flash 2 The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS-based utility . Before you start using this utility , download the latest BIOS le from the ASUS website at www .asus.
ASUS H81I-PLUS 2-3 2.1.3 ASUS CrashFree BIOS 3 The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process. Y ou can restore a corrupted BIOS le using the motherboard support DVD or a USB ash drive that contains the updated BIOS le.
2-4 Chapter 2: Getting started Booting the system to a DOS environment 1. Insert the DOS-bootable USB ash drive with the latest BIOS le and BIOS Updater to your computer’s USB port. 2. Boot your computer . When the ASUS Logo appears, press <F8> to show th e BIOS Boot Device Select Menu .
ASUS H81I-PLUS 2-5 3. Press <T ab> to switch between screen elds and use the <Up/Down/Home/End> keys to select the BIOS le and press <Enter>. BIOS Updater checks the selected BIOS le and prompts you to conrm BIOS update. 4.
2-6 Chapter 2: Getting started 2.2 BIOS setup program Use the BIOS Setup program to update the BIOS or congure its parameters. The BIOS screens include navigation keys and brief online help to guide you in using the BIOS Setup program.
ASUS H81I-PLUS 2-7 • The boot device options vary depending on the devices you installed to the system. • The Boot Menu(F8) button is available only when the boot device is installed to the system.
2-8 Chapter 2: Getting started Navigation keys General help Menu bar Submenu item Conguration elds Menu items Back button Pop-up window Scroll bar Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items.
ASUS H81I-PLUS 2-9 Submenu items A greater than sign (>) before each item on any menu screen means that the item has a submenu. T o display the submenu, select the item and press <Enter>. Pop-up window Select a menu item and press <Enter> to display a pop-up window with the conguration options for that item.
2-10 Chapter 2: Getting started Adding items to My Favorites T o add frequently-used BIOS items to My Favorites: 1. Use the arrow keys to select an item that you want to add. When using a mouse, hover the pointer to the item. 2. Press <F4> on your keyboard or right-click on your mouse to add the item to My Favorites page.
ASUS H81I-PLUS 2-1 1 2.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings.
2-12 Chapter 2: Getting started Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected elds in the BIOS setup program.
ASUS H81I-PLUS 2-13 2.5 Ai T weaker menu The Ai T weaker menu items allow you to congure overclocking-related items. Be cautious when changing the settings of the Ai T weaker menu items.
2-14 Chapter 2: Getting started Scroll down to display the following items: T arget CPU T urbo-Mode Speed : xxxxMHz Displays the target CPU T urbo-Mode speed. T arget DRAM Speed : xxxxMHz Displays the target DRAM speed. T arget Cache Speed : xxxxMHz Displays the target Cache speed.
ASUS H81I-PLUS 2-15 2-Core Ratio Limit [Auto] This item becomes congurable only when you set CPU Core Ratio to [Per Core] and allows you to set the 2-Core Ratio Limit. Select [Auto] to apply the CPU default T urbo Ratio setting or manually assign a 2-Core Ratio Limit value that is higher than or equal to the 3-Core Ratio Limit.
2-16 Chapter 2: Getting started 2.5.9 EPU Power Saving Mode [Disabled] Allows you to enable or disable the EPU power saving function. Conguration options: [Disabled] [Enabled] 2.5.10 DRAM T iming Control The subitems in this menu allow you to set the DRAM timing control features.
ASUS H81I-PLUS 2-17 DRAM CAS# Write Latency [Auto] Conguration options: [Auto] [1 DRAM Clock] – [31 DRAM Clock] RTL IOL control DRAM RTL initial V alue [Auto] Conguration options: [Auto] [1 DR.
2-18 Chapter 2: Getting started MISC MRC Fast Boot [Enabled] Allows you to enable or disable the MRC fast boot. [Enabled] Enables the MRC fast boot. [Disable] Disables the MRC fast boot. DRAM CLK Period [Auto] Conguration options: [Auto] [1] – [14] Channel A DIMM Control [Enable Bot.
ASUS H81I-PLUS 2-19 Manual Adjustment [Fast] Allows you to set a response for the CPU power phase control. Conguration options: [Ultra Fast] [Fast] [Medium] [Regular] CPU Power Duty Control [T .Probe] DIGI + VRM Duty Control adjusts the current of every VRM phase and the thermal conditions of every component.
2-20 Chapter 2: Getting started CPU Internal Power Switching Frequency Frequency T uning Mode [Auto] Allows you to set the frequency tuning mode. Conguration options: [Auto] [+] [-] CPU Internal Po.
ASUS H81I-PLUS 2-21 Power Saving Level 2 Threshhold [Auto] Allows you to set the power saving level 2 threshhold. Use the <+> and <-> keys to adjust the value. Power Saving Level 3 Threshhold [Auto] Allows you to set the power saving level 3 threshhold.
2-22 Chapter 2: Getting started 2.5.15 CPU Graphics V oltage [Auto] This item allows you to set the CPU graphics voltage. Increase the graphics voltage when increasing the iGPU frequency . Conguration options: [Auto] [Manual Mode] [Offset Mode] [Adaptive Mode].
ASUS H81I-PLUS 2-23 CPU Analog I/O V oltage Offset [Auto] This item allows you to set the CPU analog I/O voltage offset. Increase the value when increasing DRAM frequency .
2-24 Chapter 2: Getting started 2.6 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Be cautious when changing the settings of the Advanced menu items. Incorrect eld values can cause the system to malfunction.
ASUS H81I-PLUS 2-25 Limit CPUID Maximum [Disabled] [Enabled] Allows legacy operating systems to boot even without support for CPUs with extended CPUID functions. [Disabled] Disables this function. Execute Disable Bit [Enabled] [Enabled] Enables the No-Execution Page Protection T echnology .
2-26 Chapter 2: Getting started The following items appear only when you set the CPU C states to [Enabled] . Enhanced C1 state [Enabled] [Enabled] Enables enhanced C1 state. [Disabled] Disables enhanced C1 state. CPU C3 Report [Enabled] Allows you to disable or enable the CPU C3 report to OS.
ASUS H81I-PLUS 2-27 Entry on S3 RTC W ake [Enabled] The system automatically wakes up and set to Rapid Start T echnology S4 mode. Conguration options: [Enabled] [Disabled] Entry After [x] Allows you to set the wake-up time.The values range from 0 (immediately) to 120.
2-28 Chapter 2: Getting started IDE Legacy / Native Mode Selection [Native] This item appears only when you set the SA T A Mode Selection item to [IDE]. Conguration options: [Native] [Legacy] S.M.A.R.T . Status Check [Enabled] S.M.A.R.T . (Self-Monitoring, Analysis and Reporting T echnology) is a monitor system.
ASUS H81I-PLUS 2-29 DMI Gen 2 [Auto] Allows you to enable or disable DMI Gen 2. Conguration options: [Auto] [Enabled] [Disabled] NB PCIe Conguration Allows you to congure the NB PCI Express settings. PCIEX16_1 Link Speed [Auto] Allows you to congure the PCIEX16_1 speed.
2-30 Chapter 2: Getting started EHCI Hand-off [Disabled] [Enabled] Enables the support for operating systems without an EHCI hand-off feature. [Disabled] Disables the function. USB Single Port Control USB3_1~2 [Enabled] Allows you to enable or disable an individual USB port.
ASUS H81I-PLUS 2-31 Realtek PXE OPROM [Disabled] Allows you to enable or disable the PXE OptionRom of the Realtek LAN controller . Conguration options: [Enabled] [Disabled] Asmedia USB 3.0 Controller (USB3_E12) [Enabled] [Enabled] Enables the USB 3.
2-32 Chapter 2: Getting started 2.7 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Scroll down to display the following items: 2.6.9 Network Stack Conguration Network Stack [Disabled] This item allows user to disable or enable the UEFI network stack.
ASUS H81I-PLUS 2-33 2.7.1 CPU T emperature [xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the CPU temperature. Select Ignore if you do not wish to display the detected temperature.
2-34 Chapter 2: Getting started CPU Fan Max. Duty Cycle(%) [100] Use the <+> and <-> keys to adjust the maximum CPU fan duty cycle. The values range from 20% to 100%. When the CPU temperature reaches the upper limit, the CPU fan will operate at the maximum duty cycle.
ASUS H81I-PLUS 2-35 2.8 Boot menu The Boot menu items allow you to change the system boot options. Scroll down to display the following items: 2.8.1 Fast Boot [Enabled] [Enabled] Select to accelerate the boot speed. [Disabled] Select to go back to normal boot.
2-36 Chapter 2: Getting started USB Support [Partial In...] [Disabled] All USB devices will not be available until OS boot up for a fastest POST time. [Full Initialization] All USB devices will be available during POST . This process will extend the POST time.
ASUS H81I-PLUS 2-37 2.8.3 Bootup NumLock State [On] [On] Sets the power-on state of the NumLock to [On]. [Off] Sets the power-on state of the NumLock to [Off]. 2.8.4 W ait for ‘F1’ If Error [Enabled] When this item is set to [Enabled], the system waits for the F1 key to be pressed when error occurs.
2-38 Chapter 2: Getting started Boot from Storage Devices [Legacy OpR...] Allows you to select the type of storage devices that you want to launch. Conguration options: [Both, Legacy OpROM rst] [Both, UEFI rst] [Legacy OpROM rst] [UEFI driver rst] [Ignore] Boot from PCI-E/PCI Expansion Devices [Legacy OpR.
ASUS H81I-PLUS 2-39 KEK Management The KEK (Key-exchange Key or Key Enrollment Key) manages the Signature database (db) and Revoked Signature database (dbx). Key-exchange Key (KEK) refers to Microsoft ® Secure Boot Key-Enrollment Key (KEK). Delete the KEK Allows you to delete the KEK from your system.
2-40 Chapter 2: Getting started 2.8.10 Boot Option Priorities These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system.
ASUS H81I-PLUS 2-41 2.9 T ools menu The T ools menu items allow you to congure options for special functions. Select an item then press <Enter> to display the submenu. 2.9.1 ASUS EZ Flash 2 Utility Allows you to run ASUS EZ Flash 2. Press [Enter] to launch the ASUS EZ Flash 2 screen.
2-42 Chapter 2: Getting started 2.10 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items.
A-1 ASUS H81I-PLUS Appendices Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received including interference that may cause undesired operation.
A-2 Appendices Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
A-3 ASUS H81I-PLUS ASUS contact information ASUST eK COMPUTER INC. Address 15 Li-T e Road, Peitou, T aipei, T aiwan 1 1259 T elephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail info@asus.com.tw Web site www .asus.com.tw T echnical Support T elephone +86-21-3842991 1 Online support support.
A-4 Appendices DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Responsible Party Name: Asus Computer International Address: 800 Corporate Way, Fremont , CA 94539.
Ein wichtiger Punkt beim Kauf des Geräts Asus H81IPLUS (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Asus H81IPLUS noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Asus H81IPLUS - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Asus H81IPLUS reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Asus H81IPLUS erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Asus H81IPLUS besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Asus H81IPLUS verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Asus H81IPLUS. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Asus H81IPLUS gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
