Benutzeranleitung / Produktwartung TX-SR508 des Produzenten Onkyo
Zur Seite of 64
A V Receiv er TX-SR508 Instruction Manual Thank you for purchasing an Onkyo A V Receiv er . Please read this manual thoroughl y before making connections and plugg ing in the unit. Follo wing the in structions in this m anual will enable you to obtain opti mum performance and listening enjoyment from your new A V Receiv er .
2 En Impor tant Safety Instructions 1. Read these ins tructions. 2. Ke ep these instructions. 3. Heed all warnings. 4. Follo w all instructions. 5. Do not use this apparatus near w ater . 6. Clean only with dry cloth. 7. Do not block an y ventilat ion openings.
3 En Precautions 1. Recording Copyright —Unless it’ s for personal use only , recording cop yrighted ma terial is illegal without the permission of the copyright holder . 2. A C Fuse —The A C fuse inside the unit is not user -ser- viceable. If you cannot turn on the unit, contact your Onkyo de aler .
4 En F or British models Replacement and mounting of an A C plug on the power supply cord of this unit should be performed only b y qual- ified service personnel.
5 En Contents Important Safety Instruction s ......................................... 2 Precautions ................................................................ ....... 3 Supplied Accessories ............................................... ......
6 En Features Amplifier • 90 W atts/Channel @ 8 ohms (FTC) • 130 W atts/Channel @ 6 ohms (IEC) • 160 W atts/Channel @ 6 ohms (JEIT A) • WRA T–Wide Range Am plif ier T echnology (5 Hz to 100 kHz bandwidth) • Optimum Gain V olume Circuitry • H.
7 En Fr ont & Rear P anels North American models European and Asian models The actual front panel has v ari ous logos printed on it. They are not shown here for clarity . The page numbers in pa rentheses show where you can find th e main e xplanation for each item.
8 En For detailed information, se e th e pages in parentheses. a A udio input indicators b Listening mode and format indicators ( ➔ 21 , 29 ) c A udyssey indicators ( ➔ 23 , 38 ) d T uning indicat.
9 En Remote Contr oller For detail ed information, see the pages in parent heses. a ON/ST ANDBY button ( ➔ 20 ) b REMO TE MODE / INPUT SELECT OR bu tt on s ( ➔ 21 ) c SP LA Y OUT button ( ➔ 22 ).
10 En About Home Theater Thanks to the A V receiv er’ s superb capabilities, you can enjoy surround sound wi th a real sense of movement in your ow n home—just like being in a movie thea ter or concert hall. W ith Blu-ray Discs, you can enj oy DTS and Dolby Digital.
11 En Connecting the A V Receiver Speaker Configura tion The follo wing table indicates the channels you should use depending on the number of speakers that you ha ve. For 7.1-channel surround-sound playback, you need se ven speakers and a po wered subwoofer .
12 En • Don’t connect mo re than one cable to each speak er ter- minal. Doing so may damage the A V receiver. • Don’t connect one speaker to se veral terminals.
13 En Connecting a P o wered Subwoofer Using a suitable cable, c onnect the A V recei ver’ s SUB- WOOFER PRE OUT jack to an input on your pow- ered subwoofer , as show n. If your subwoofer is unpowered and you’ re using an external amp lifier , con- nect the SUBW OOFER PRE OUT jack to an input on the am p.
14 En Connected image with A V components • Before making any A V connections, read the manuals supplied with your A V components. • Don’t connect the po wer cord until you’ ve co mpleted and double-checke d all A V connections. • Push plugs in all the way to ma ke good connections (loo se connections can cause noise or malfunc- tions).
15 En Connect your components to the appropriate jacks. The default input assignments are sho wn below . ✔ : Assignment can be changed ( ➔ 35 ). Refer to “ About HDMI” ( ➔ 61 ) and “Using an RIHD-compatibl e TV , Player , or Recorder” ( ➔ 62 ).
16 En Connect your components to the appropr iate jack s. The default input assi gnments are sho wn below . ✔ : Assignment can be changed ( ➔ 35 ). *1 Connect a turntable (MM) that has a phono preamp built-in. If your turntable (MM) doesn’t hav e it, you’ll need a commercially av ailable phono preamp.
17 En Note • When you connect to both A UX INPUT A UDIO jacks and A UX INPUT LINE IN jack at the same time, AUX INPUT LINE IN jack will be gi ven a higher priority . • The A V receiv er can output audio and video signals from the AU X I N P U T jacks to the VCR/DVR OUT jacks.
18 En This section explains ho w to connect the supplied indoor FM antenna and AM loop antenna. The A V receiv er won’t pick up an y radio signals without an y antenna connected, so you must connect the antenna to use the tuner . Cautio n • Be careful that you don’ t injure yourself when using thumbtacks.
19 En The A V recei ver supports se veral conn ection formats for comp atibilit y with a wide range of A V equipment. The format you choose will depend on the fo rmats supported by your components.
20 En T urning On/Off the A V Receiver T urning On Press ON/ST ANDBY on the fr ont panel. or Press RECEIVER followed by ON/ST ANDBY on the remote co ntroller . The A V rece iv er comes on, the display lights, and the ST ANDBY indicator goes of f. T urning Off Press ON/ST ANDBY on the front panel or the r emote controller .
21 En Basic Operations ■ Operating on the A V receiver ■ Operating with the remo te controller Y ou can display v arious info rmation about the current input source as follows. (Components connected to the UNIVERSAL PORT jack are ex cluded.) Tip • Alternatively , you can use the A V receiv er’s DISPLA Y .
22 En Y ou can temporarily mute the output of the A V receiv er. Tip • T o unmute, press MUTING again or adjust the volume. • The Mute functi on is cancelled when the A V rece i ver is set to Standb y . W ith the sleep timer , you can set the A V receiv er to turn off aut omatically after a specif ied period.
23 En W ith the supplied calibra ted microphone, Audyssey 2EQ automatically de termines th e number of speakers con- nected, their size for purpos es of bass management, opti- mum crossov er frequencies to the subwoofer (if present), and distances from the pr imary listening position.
24 En Note • When Audyssey 2EQ Room Correction and Speaker Setup is complete, the “ A udyssey ” will be set to “ On ” ( ➔ 38 ). The A udyssey indicator will light ( ➔ 8 ). • Y ou can cancel Audyssey 2EQ Room Correction and Speaker Setup at any point in this proced ure simply by disconnecting the setup microphone.
25 En Listening to the Radio W ith the built-in tuner you can enjoy AM and FM radio stations. Y ou can store your fa vo rite stations as presets for quick selection.
26 En Y ou can store a combination of up to 40 of your fav orite FM/AM radio stations as presets. Selecting Presets Tip • Y ou can also use the remote c ontroller’ s number buttons to select a preset directly . Deleting Pres ets When tuned into an RDS station, the RDS indicator lights.
27 En Finding Statio ns by T ype (PTY) Y ou can search for radio stations by type. Listening to T raffic News (TP) Y ou can search for stations that broadcast traf fic ne ws. ■ RDS program types (PTY) 1 Pre ss RT/PTY/TP twice. The current program type appears on the display .
28 En Recor ding This section explains ho w to record the selected input source to a component with recording capability , and how to record audio and video from different sou rces. Connecting a Recor ding Component Note • The A V receiv er must be t urned on for reco rding.
29 En Using the Listening Modes See “ About Listening Modes” for detailed information about th e listening modes ( ➔ 30 ). Listening Mode Buttons MO VIE/TV b utton This button selec ts the list ening modes intended for use with mo vies and TV . MUSIC b utton This button selec ts the list ening modes intended for use with music.
30 En The A V receiv er’ s listening m odes can transform your listening room into a mo vie theater or concert hall, with high fidel- ity and stunning surround sound. Explanatory No tes ■ Input Source The follow ing audio fo rmats are supported by the listening mode.
31 En Listenin g Modes Listening Mode Description Input Source Speaker Layo ut Pure Audio *1 In this m ode, the display and video circ uitry are turned of f, minimizing pos- sible noise sources for the ultimate in high-fidelity audio reproduction.
32 En DTS-HD High Resolution Audio (Continued from the pre vious page ) DX C N FX C N * 2 DTS-HD Master Au di o DX C N FX C N * 2 DTS Express S D XCN DSD *7 DX C N DTS 96/24 *8 This mode is for use with DTS 96/24 sources. This is hig h-resolution DTS with a 96 kHz sampling rate and 24-bit resolution, pro viding superior fidel- ity .
33 En Onkyo-Original DSP Listening Modes Note *1 (North American models) This listening mode is not av ailable. *2 When the input source contains th e encoded front high channel, front high speak ers output the sound. *3 If there are no surroun d back speakers, or Powered Zone 2 is being used, Dolby Pro Logic II is used.
34 En Ad vanced Setup Note The on-screen setup menus are displayed when: • There is no video in put, or • The video input is 480p, 576p, 720p, 1080i, or 1080p. The on-screen setup menus appear on the connected TV and provide a con venient w ay to change the A V recei ver’ s va rious settings.
35 En Explanatory Notes Menu HDMI Input If you connect a video component to an HDMI input, you must assign that input to an i nput selector . F or example, if you connect your Blu-ra y Disc/D VD player to HDMI IN 2 , you must assign “ HDMI2 ” to the “ BD/D VD ” input selector .
36 En Note • When an HDMI IN is assigned to an input selector in “HDMI Input” ( ➔ 35 ), this input assignment is automatically set to the same HDMI IN . And in addition to the usual inputs (e.g., CO AX1 , COAX2 , etc.), you can also select HDMI input s.
37 En ■ Double Bass Note • This function can be set only if the “ Sub woofer ” setting is set to “ Ye s ”, and the “ Front ” setting is set to “ Large ” ( ➔ 36 ). W ith the Double Bass functi on, you can boost bass out- put by feeding bass sounds from the front left, right, and center channels to the subwoofer .
38 En ■ Input Ch(Mono) ` L+R : Both the left and right channels are output. ` Left : Only the left channel is output. ` Right : Only the right channel is output. Dolby Settings PLIIx Music (2ch In put) These settings apply to only 2-channel stereo sources.
39 En Note • Audyssey equalizing does no t work for DSD sources. ■ Dynamic E Q ` Off : Audyssey Dy namic EQ off. ` On : Audyssey Dy namic EQ on. The Dynamic EQ indicator will light ( ➔ 8 ). W ith Audyssey Dynamic EQ™, you can enjoy great sound ev en when listening at low v olume lev els.
40 En Theater -Dimensional Sett ing ■ Listening Angle ` Wid e : Select if the listening angle is 40 degrees. ` Narro w : Select if the listening angle is 20 degrees. W ith this setting, you can optimize the Theater -Dimen- sional listening mode by specifying the angle of the front left and right speakers relati ve to the listening position.
41 En Remote Contr ol Settings ■ Remote ID ` 1 , 2 , or 3 When sev eral Onkyo components are used in the same room, their remote ID codes may overlap. T o dif ferenti- ate the A V recei ver from th e other components, you can change its remote ID from “ 1 ”, to “ 2 ” or “ 3 ”.
42 En ■ HDMI Control (RIHD) ` Off : p disabled. ` On : p enabled. This function allo ws p -compatible components connected via HDMI to be contro lled with the A V receiv er ( ➔ 15 ). Note • When set to “ On ” and close the menu, the name of connect ed p -compatible components and “ RIHD On ” are dis- played on the A V receiver.
43 En Y ou can change various a udio settings b y pressing AU D I O . Note These settings are disabl ed when: • a pair of headph ones is connected, or •t h e “ A udio TV OUT ” setting is set to “ On ” ( ➔ 41 ) and an input selector other than HDMI is selected.
44 En CinemaFIL TER W ith the CinemaFIL TER, you can soften overly bright movie soundtracks, which are typically mixed for repro- duction in a movie theater .
45 En The digital input si gnal formats are av ailable only for the input sources that you hav e a ssigned a digital input jack ( ➔ 35 ). Normally , the A V receiv er detects the signal format auto- matically .
46 En Zone 2 In addition to your main listening room, you can also enjoy pla yback in the other room, or as we call Zone 2. And, you can select a different source for each room. There are two w ays you can connect Zone 2 speak ers: 1. Connect them directly to the A V receiv er.
47 En If you’ ve connected your Zone 2 speakers to the A V receiv er, as explained in “C onnecting Y our Zone 2 Speak- ers Directly to the A V re ceiv er” ( ➔ 46 ), you must set the “ Front Hi gh/Zone2 ” setting to “ Zone2 ”.
48 En Contro lling Zone 2 with the Remote Contro ller Note • T o control Zone 2, you must press the remote controller’ s ZONE2 firs t. Adjusting the V olume for Zone 2 ■ Operating with the remot.
49 En Contr olling iP od Models sold are dif ferent depending on the re gion. Connecting an Onky o Doc k B A *1 C No. Onkyo Dock Cable Note Pa ge A UP-A1 Dock (Universal Port Option Dock) — • When UP-A1 Dock th at seated iPod is connected, the powe r consumption on standby mode slightly increases.
50 En UP-A1 Dock W ith the UP-A1 Dock, you can easily play the musi c, photo, or movie stored on your Apple iPod through the A V receiv er and enjoy great sound.
51 En RI Dock W ith the RI Dock, you can easily play the music stored on your Apple iPod through the A V recei ver and enjoy great sound, and watch iPod slidesho ws and videos on your TV .
52 En ✔ : A vailable b uttons Models sold are different dep ending on the region. Note • With some iPod models, generatio ns and RI Docks, certain butto ns may not work as e xpected. • For detailed operation of the iPod, please re fer to the instruction manual of RI Dock.
53 En Contr olling Other Components Y ou can use the A V receiv er’ s remote controller (RC-764M) to control your ot her A V components. This section explains ho w to ente r the remote control code (with the default underlined ) for a component that you want to control: D V D, TV , CD, etc.
54 En If you want to control an Onkyo component b y pointing the remote controller direct ly at it, use the following re mote control codes: ` 32900 : Onkyo Blu-ray Disc player ` 32901 : Onkyo HD-D VD.
55 En Note • With some components, certain buttons may no t work as expected, and some may not work at all. ✔ : A vailable b uttons *1 The p function is not supp orted. The p sup- ported by the A V receiver is the CEC system control function of the HDMI standard.
56 En T roub leshooting If you ha ve an y trouble using the A V receiv er, look for a solution in this section. If you can’t resolv e the issue your- self, contact your Onkyo dealer .
57 En ■ Only the center speaker produces sound ■ The surround speakers pr oduce no sound ■ The center speaker pr oduces no sound ■ The fro nt high or surroun d back speakers prod uce no sound .
58 En ■ There’ s no picture from a source conn ected to an HDMI IN ■ The on-screen menus don’t appear ■ Reception is noisy , FM stereo recep tion is noisy , or the FM STEREO indi cator doesn.
59 En ■ The A V receiver unexpectedly selects your iP od as the input source ■ Can’t record ■ There’ s no sound ■ The sound changes when I conne ct m y headphones ■ The displa y doesn’.
60 En Specifications Amplifier Section Video Section Tu n e r S e c t i o n General ■ HDMI ■ Video Inputs ■ Video Outputs ■ A udio Inputs ■ A udio Outputs ■ Others Specifications and features are subject to change without notic e.
61 En About HDMI Designed to meet the increased demand s of digital TV , HDMI (High Definition Mult im edia Interface) is a new digita l interface standard for connect ing TVs, projectors, Blu-ray Disc players/D VD players, se t-top boxes, and other video components.
62 En Using an RIHD-compatible TV , Play er , or Recorder p , which stands for Remote Interacti ve o ver HDMI, is the name of the system control function found on Onkyo components. The A V recei ver can be us ed with C EC (Consumer Electronics Cont rol), which allo ws system control over HDMI and is part of the HDMI standard.
63 En ■ How to connect and setup 1 Confirm the connecting and setting . 1. Connect the HDMI OUT jack to the HDMI input jack of the TV . 2. Connect the audio output from the TV to the OPTICAL IN 2 jack of the A V recei ver using an optical digital cable.
SN 29400388 Y1002-1 (C) Copyright 2010 ONKY O CORPORA TION Japan. All rights reser ved. * 2 9 4 0 0 3 8 8 * Sales & Product Planning Div . : 2-1, Nisshin-cho, Ne yaga wa-shi, OSAKA 572-8540, JAP AN T el: 072-831-8023 F ax: 072-831-8163 ONKY O U .S.
Ein wichtiger Punkt beim Kauf des Geräts Onkyo TX-SR508 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Onkyo TX-SR508 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Onkyo TX-SR508 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Onkyo TX-SR508 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Onkyo TX-SR508 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Onkyo TX-SR508 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Onkyo TX-SR508 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Onkyo TX-SR508. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Onkyo TX-SR508 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
