Benutzeranleitung / Produktwartung CJ1W-DRM21 des Produzenten Omron
Zur Seite of 274
CS-ser ies Devi ceNet Uni t: CS 1W- DRM21 CJ-series Dev iceNet Unit : CJ1W-DRM21 Opera tion Manu al Revised July 20 01.
iv.
v Noti ce: OMRON produc ts are manufact ured f or use according to proper proc edures by a qualified ope rator and only f or t he pur poses descr ibed in this manual . The fol lowing con ventions are used to indicat e and classify precaut ions in t his manual.
vi Tradema rks a nd Cop yrights Devi ceNet is a r egistere d trademark of the Open DeviceNet V endor Association, Inc. Windows, Windows 95, W indows 98, W indows Me, Windows NT , and Windows 200 0 are registered trademar ks of the Microsoft Corp oration.
vii TABLE OF CONTENTS PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi 1 Int end ed Au die nce . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii 2 Gen er al P re caut ion s .
viii TABLE OF CONTENTS SECTION 5 Remot e I/O Sl ave Communica tion s . . . . . . . . . . . . . . . . . 121 5-1 Sl a ve R e mote I /O Co mm uni cati on s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2 5-2 Fi xed Al l ocat ion s .
ix About this Man ual: This manual descr ibes the ins tallation and operat ion of CS1W-DRM21 De viceNet Unit f o r SYSM A C CJ-series PLCs and the C J1W -DRM 21 D e vi c eN et Unit f or SYSMAC CJ-series PLCs, and incl udes the sections des cr ibed below .
x SYSMAC CS/CJ Series Commu nication Com - mand s Ref er ence M anual CS1G/H-CPU -E CPU Units CS1W -SCB21/41 Serial Comm unicat ions Boards CS1W -SCU21 Serial Comm unicat ions Un it Inf orm ati on on FINS and Host Li nk command s that can be s ent to CS/CJ-seri es CPU Units.
xi PRECA U TIONS This section p rovides gene ral prec autions for using t he De v iceNet Unit a n d r elate d de v ices . The inf ormation contained in this section is i mpor t ant for the safe and r .
xii Inten ded A udience 1 1 Intended A udience This manual is intended for the f ol lo wing personne l, who must also hav e knowledge of electrical systems (an elect rical engineer or the equiv alent). • P e rsonnel in charge of installing F A systems.
xiii Operating E n vironment Precauti ons 4 measure for such problems, e x ter nal safety measures must b e pro vided to ensure saf ety i n the system. • When the 24-VDC out put (service power supply to the PC) is ov erload ed or shor t-circuited, the voltage may drop and result in the outpu t s bei ng turn ed OFF .
xiv Application Prec autions 5 The operat ing environment of the P C System can have a large e ff e ct on the longe vity and reliability of the system. Improper operating environment s can lead to malfunction, f ailure, and other unf oreseeable problems with the PC System.
xv Application Pre cautions 5 • Double-check all the wi ring an d con nection of ter minal bloc ks and con- nectors before mount ing the Units. • Use cr imp ter minals f o r wir ing. Do n ot connect bare st r anded wires directly to term inals. • Obser ve the f ollowing prec autions when wi ring the c ommunications cab le .
xvi Conf ormance to EC Directiv es 6 6 Conf ormance to EC Directives 6-1 App li cable D ire cti ves • EMC Directi ves 6-2 C onc ep ts EMC Directives OMRON dev ices that com ply with EC Directiv es also conform t o t he re lated EMC standards so that they c an be more easily built into other de v ices or machines.
xvii Conformance to E C D i rect ives 6 2. Wire the c ontrol panel with as t hick and short electric lines a s possible and ground t o 100 Ω mi n. 3. K eep DeviceNet commun ications cables as short as possible and ground to 100 Ω min. Ferrite Core (Data Line Filter): 0443-164151 (manufacturered by Fair-Rite Products Co.
1 SECTIO N 1 F eatur es and Sys tem C onf igur ation This sect ion p rov ides an ov e r vie w of the De vic eNet n etwork, in clu ding fea tur es, sp ecif ication s, a nd syste m conf i guratio ns. 1-1 Ove rvi e w of Devi ceN et . . . . . . . . . . . .
2 Overview of DeviceNet Secti on 1-1 1-1 Overview of Devi ceNet Devi ceNet is a mul ti-bit, m ulti-v e ndor network that combin es controls and dat a on a ma chine/line-control lev e l and tha t conf orm s to Devic e Net open field net- w ork s pec ific a ti ons .
3 Ov ervi ew of Dev iceNet Se cti o n 1 -1 1-1-1 Ov erall S ystem Co nfigur a tion Note The Configurator is required if m ore than one M aster is connect ed in a single network wh en a CV M1-DRM21-V 1 or C200HW-DRM21-V1 is used.
4 Overview of DeviceNet Secti on 1-1 Co nfi gur at or Fea tur e s • Enables user-set al locations f or remote I /O (choice of node address order , 2 area allocations, et c.). • Enables serial connection to the Progr amm ing De vice P or t of a PC.
5 Ov ervi ew of Dev iceNet Se cti o n 1 -1 T e mp era t u r e In pu t T er mi nal s • T em perature da ta is input as binar y da t a f or 4 inputs. • Therm ocoup le and platinum resistance ther momet er inputs are av ailabl e.
6 Overview of DeviceNet Secti on 1-1 1-1-2 App li cable U nit s a nd Devic eNe t Fu nctio ns Remote I/O Master DeviceNet Unit (Master) CPU Unit Remote I/O communications DeviceNet Slav es Ite m Master Model Without Conf igurat or W ith Configura tor Max.
7 Ov ervi ew of Dev iceNet Se cti o n 1 -1 Remote I /O Slave (only Units Mounted i n a PC) DeviceNet Unit (Master) CPU Unit IN area OUT area Remote I/O communications DeviceNet DeviceNet Unit (Slave) CPU Unit IN area OUT area Slav es Item CPU Unit to whic h a S l a ve is moun ted Unit Mod el W itho ut the Configur ator With t he Configur ator Max.
8 Overview of DeviceNet Secti on 1-1 Messag e Communications Commu nica tions In struc tions Note FINS message c o mmunications are supp ort ed between any two PCs with a CS/CJ-series Dev iceNet Unit (CS1W -DRM21/CJ1W -DRM 21).
9 Ov ervi ew of Dev iceNet Se cti o n 1 -1 V1) or a CVM 1/CV -series De viceNet M aster Unit (CVM1-DRM21-V1). Ref er to 6-3 Using FINS Message Com munications fo r d e t a i l s. Communications So ftware Switches and Communications Status Dedicated words in the CPU Unit are allocated for De v iceNet commu nications software switches and status.
10 Overview of DeviceNet Secti on 1-1 General -purpose Slaves (Communi cations Cable: Normal Sq uare Connectors) Name Appearanc e I/O points Model number Rem arks Remote I /O T erminal s with T ransi .
11 Ov ervi ew of Dev iceNet Se cti o n 1 -1 Note F or details on S la v es, ref er to the De viceNet (Com poBus/D) S la v es O perat ion Ma nual (W 347).
12 Overview of DeviceNet Secti on 1-1 W a terproof and En vi r onmen t- resi stant S laves (Communications Cable: Round Connec tor s) Special Slaves (Communications Cable: No rm al Square Con nector s.
13 Ov ervi ew of Dev iceNet Se cti o n 1 -1 MUL TIPLE I /O TERMINAL Un its Unit I/O points W ord s all ocat ed in PC memory I/ O connec- tions Unit power suppl y vo l t a g e Ins tal la - tio n Model .
14 Overview of DeviceNet Secti on 1-1 Note The front-panel indi c a to rs and other par ts of A nalog Input Units, Analog Out - put Units, and Counte r Units diff er from those of o ther I/O Units . T hese Units belong to a group called Spe cial I /O Units.
15 DeviceN et Unit F eatures Se cti o n 1 -2 1-1-5 D e vice Net Co nfig urat or Use v ersion 2 of the Devi ceNet Configurator f or the CS1W-DRM 21/CJ1W- DRM21 Dev iceNet Unit. Earlier ve rsions of t he De viceNet Configurator do not suppor t the CS1W -DRM21 Dev iceNet Unit.
16 DeviceNe t Unit F eat u res Section 1-2 Explicit Mess age Com munications Note Ref er to 6-4 Sending E xplicit Messages for det ails on remote I/O communica- tions. FINS Messag e Comm unicati ons Note Ref er to 6-3 Using F INS Me ssage Com munications f or d eta ils o n FI NS com - mun i ca tio n s.
17 DeviceN et Unit F eatures Se cti o n 1 -2 taneously . A Uni t that is used as a slav e supp ort s fix ed and user-se t alloca- tions. The maxi mum I/O for t he sla ve f unction is 100 words. Note Ref er to SECTION 5 R emote I/O Slave Comm unications f or details .
18 DeviceNe t Unit F eat u res Section 1-2 CX-Prog ramm er Program mi ng an d Monitoring o f DeviceNet Slave PCs (V er . 2. 1 or Later ) CX-Programmer V er . 2. 1 connected t o a serial com munications por t on a De viceNet PC can be used to rem otely program and mon itor other De viceNet PCs (i.
19 DeviceN et Unit F eatures Se cti o n 1 -2 Mul tip le P Cs in a S ingl e Netw ork Multiple De viceNet Units ca n be connected in a single networ k f or message communications between P Cs as well a s for r emote I/O commu nications between PCs and sla ves in multiple g roups.
20 DeviceNe t Unit F eat u res Section 1-2 a De viceNet Unit. (S ee Appendix D Memo ry Card Backup Function f or more details.) Note Ref er to 7-2 Memory Card Backu p Functions fo r d e tai ls.
21 Specific ations Se ct io n 1 -3 1-3 Specifications 1-3-1 Device Net Unit Mo del General Speci f ication s General spec if ications of the CS/CJ-seri es De vic eNet Unit conf orm to the general specifications f or the SYSMAC CS/CJ-series CPU Units.
22 Specif ications S ecti on 1-3 Words allo - cat ed i n t he CPU Unit De vice N et re mote I/O communi- cati ons When used as a Maste r Fix ed all oca- tions Fix ed w ords in the CS/CJ- series De v iceNet Area i n the CIO Are a (any of three set tings ).
23 Specific ations Se ct io n 1 -3 Re mote I/O mast er co m- mun icati ons Sla v e alloc ation met hod Fix ed allo- cati ons Select one of the f ollo wi ng fix ed all oca tion areas usi ng th e Fix ed Alloc ated Area Switche s 1, 2, and 3 in the soft ware s wi tches i n the allocat ed CIO Area word s .
24 Specif ications S ecti on 1-3 Re mote I/O master Max. No . of Slav e s con- nected per Devi ceNet Unit Fix ed all ocati ons 63 nodes User-s et allo ca tion s By allo- cated DM Area words By Config- urat or Max.
25 Specific ations Se ct io n 1 -3 Re mote I/O sla v e Allo cation met hod Fix ed all o- cati ons Select one of the f ollo wi ng fix ed all ocati on areas usi ng the Sla v e Fix ed Alloc ated Area Swi tches 1, 2, a nd 3 in the softwa re swi tches i n the allo cated CIO Area wo rds.
26 Specif ications S ecti on 1-3 Def aul t sett ings • Scan lis t: Not suppo r ted • Master comm un ications : Suppo r ted • Slav e communi cat ions: Disab l ed • Rem ote I/O c omm un ic ati o.
27 Specific ations Se ct io n 1 -3 Other f unc- ti ons Remote p r og ram ming/moni torin g func - ti ons A CX-Pro gr ammer connect ed to the serial c ommuni cati ons port of a PC to whi ch a CS/CJ-seri es Devi ce Net Unit is mounte d can remotel y pro gram and monitor De viceNet s lav e PCs wi th a CS/ CJ-series De viceNet Unit mount ed.
28 Specif ications S ecti on 1-3 1-3-2 C omp aris on b et ween CS 1W -DRM 21 an d C J1W -D RM21 Only the f ollowi n g items are different between the CS1W -DRM21 and the CS1W -DRM21.
29 Comparison with Pre viou s Models Se cti o n 1 -4 1-4 Compar i son wi th P re vious M odel s The follo wing tabl e provides a compar ison b etween the CS1W-DRM21 De viceNet Unit and the C200HW -DRM 21-V1 De viceNet M aster Unit used in a CS/CJ-se ries PC.
30 Comparison with Prev i ous Models Secti on 1-4 Rem ote I /O commun ica - tions Mast er Fix ed all oca- tio n s C200H Dev iceNet wo rds in CIO Area 1,600 poi nts (50 i nput wor ds , 50 output words .
31 Comparison with Pre viou s Models Se cti o n 1 -4 Rem ote I /O commun ica - tions Mast er Max. No . of sla v es con - nected With no Conf igur ator (f ix ed al locat ions): 50 nodes 63 nodes f or f.
32 Comparison with Prev i ous Models Secti on 1-4 Starting and stoppi ng remote commun ica tions during I/O commun ica tions Starts or stops remot e I/O comm unicat ions usi ng the Confi gurat or or the softwa re s witc h from a P rogr amming De vic e.
33 Outline of the Con figurator Se cti o n 1 -5 1-5 O ut li ne o f the Co nfi gur at or Allocations f or remote I/O communications c an be set in any order of node addresses f rom the Co nfigurator . Us ers can also set re mote I/O com munica- tions conn ections.
34 Outline of th e C onfigurator Secti on 1-5 Note 1. Master device par ameters use d in a scan list are created with either of the f ollowing methods . a) Using the Parameter Wizard b) Setting all parameters 2. Connec t only o ne C onfigurator to eac h Net w or k.
35 Outline of the Con figurator Se cti o n 1 -5 Main f unct ions Setup func tions Master de vice p ar ameter set tings f or OMR ON ’ s Master • Remote I/O mast er all ocat ions (w ith a scan list ) The node addre ss or der can be set as desire d. T wo output b lock s and two i nput blo c ks can be allo cat ed.
36 Basic Operat i ng Procedu res Secti on 1-6 1-6 Basi c O perating P r o cedures 1-6-1 Net work In stalla tio n Proce dure Note F or details on the network inst alla tion procedure, ref er to the De viceNet Oper- ation Manual ( W2 67 ). Only a gene r al descr ipt ion is giv en here.
37 Basic Oper ating Procedure s Se ctio n 1 -6 Node address (Pins 1 to 6) Baud rate (Pins 7 and 8) Etc. 3. Mo unt the Master a nd w ire the netwo rk. T reat as a CPU Bus Unit. Can mount to a CPU Rac k or Ex pans ion Rac k. With fix ed allocations: 3 Units max.
38 Basic Operat i ng Procedu res Secti on 1-6 messag e commun icat ions may not be possible unles s t he De viceN et Unit is registered in the local network table .
39 Basic Oper ating Procedure s Se ctio n 1 -6 3. Check Unit Status 2 (word n+ 11, bit 03) from a Programm ing De vice con- nected to the CPU Unit to se e if the mas ter function is ON (enabled). If i t is enab led, skip step 4 below and procee d to step 5.
40 Basic Operat i ng Procedu res Secti on 1-6 2. Check Unit Status 2 (word n+ 11, bit 07) from a Programm ing De vice con- nected to the CP U Unit to see if t he slav e function i s OFF (disabled). If it is disab led, skip step 3 below and proceed to st ep 4.
41 Basic Oper ating Procedure s Se ctio n 1 -6 4. S wit ch th e CPU Unit to RUN mode . Slav e remo te I/O communications wil l begin. Messa ge Comm un ication s On ly (Neit her Ma ster n or Sla v e Fu nc tion Used ) The Dev iceNet Un it does not ha ve to be registered in the sca n li st if it is only used f or mess age communications.
42 List of Us age Methods by P u rpose Secti on 1-7 1-7 L ist of Usage Metho ds by Purpose Situat ion Action P age Design Alloca ting an y words f or re mo te I /O In o rde r of no de addre sses Set usi ng the allocat ed DM Area wor ds.
43 List of Us age Methods by P urpose Se ctio n 1 -7 Operat ion Stoppin g r emote I / O commu ni ca- tions with al l Sla ves Stop co mmuni cat ions usi ng the Conf igur at or or the Remote I/ O Communi cation s Stop Switch in th e all ocated CI O Area words .
45 SECTIO N 2 Nom enclature and Installation This sectio n descr ibe s the nomencla tur e and inst alla ti on of t he De vic eNet Unit . 2-1 No me ncla tur e a nd Fu nct ion s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 6 2-1 -1 No me ncla tur e a nd Fu nct ion s .
46 Nomenclatu re and Functions Secti on 2-1 2-1 Nomenc lature and Function s 2-1-1 N ome nclatur e and Fu nctio n s CS1W -DRM21 CJ1W -DRM21 Indi cators The DeviceNet Units are equipped with the f ollowi ng ind icators that indicat e the operating status of the node itself and the over all network.
47 Nomenclatu re and F unction s Sec tio n 2 -1 2-1-2 S tatu s Ind ica tors: MS a nd NS The MS (Modu le Status) indicator indicates the status of the node itself and the NS (Network Status) indicator indi cates the status of the network. The MS and N S indicators c an be green or red an d they can be O FF , ON, or flashing (alter nating 0.
48 Nomenclatu re and Functions Secti on 2-1 2-1-3 S e ven -Seg men t D isplay In additi o n to the MS and NS indicators, De viceNet Units ha v e a 2-d igi t, 7- segment displa y that nor mall y indicates the master nod e add r ess.
49 Nomenclatu re and F unction s Sec tio n 2 -1 The fol lowing di agram shows the alternating error code/ node addres s display . The ma ster ’ s error code and master ’ s node a ddress wil l be displayed if an error has occurred at t he master .
50 Nomenclatu re and Functions Secti on 2-1 Note 1. The node address is set to 63 at the f actor y . 2. A n y nod e address fr om 0 throug h 63 c an be set as long as it hasn ’ t been set on another slav e node.
51 Installing the Devic eNet Unit Se cti o n 2 -2 Co nti nue / Sto p Remo t e I /O Co mmuni cat io ns When the De viceNet Unit is used as a maste r , pin 3 is u sed to set whether or not communications will stop after a c ommunicat ions err or . If pin 3 is ON, remo te I/ O c ommunications will be stopped if one of the fol low- ing errors occurs.
52 Installing the DeviceNet Unit Secti on 2-2 • In the CS-ser ies , up to 16 Un its can be m ounted to the CS1W -BC 3 CPU Backplane o r CS1W-B I 3 Expans ion CPU Backplane. • In the CJ-ser ies , up to 16 U nits can be m ounted to the CPU Unit or Expansion Unit (but no more than 10 Units on either).
53 Installing the Devic eNet Unit Se cti o n 2 -2 Note When m ounting the Unit , provide the clear anc e shown below to facilitate easy mounting or dismoun ti ng.
54 Installing the DeviceNet Unit Secti on 2-2 • Provide separate condui ts or ducts f or the I/O lines to prev ent noise from high-tension li nes o r power li n es . • Leav e the labe l attached to the Un it when wiring. Rem o ving the la bel may result i n malfunct ion if f o reign matter enters the Unit.
55 Installing the Devic eNet Unit Se cti o n 2 -2 2-2-4 E xter na l Dime ns ions CS1W -DRM21 These diagrams show the dimensio ns of the De viceNet Unit. Refer to the CS1 Series CPU Unit Operation Manual (W339) o r the CJ S eries CP U Unit Opera- tion Manual (W3 93) f or the dimens ions of the Unit whe n it is mounted t o the Backplane.
57 SECTIO N 3 Allocated CIO and DM W o rds This s ecti on describ e s the word s alloca ted to t he De viceNet Unit in t h e CIO Area a nd DM Area. These words bot h en able cont roll ing th e Devi ceNet Unit an d accessin g Unit and netw ork sta tus.
58 Ov erview of W ord A llocations Secti on 3-1 3-1 Overview of W or d Allocations The words shown in the f ollowing diagram are allocated according to the unit number setting. For each Unit, t h ere are 25 words allocated in the CIO Ar ea and 100 words all ocated in t he DM Area.
59 Ov ervi ew of W ord A llocatio n s Se cti on 3 -1 3-1-1 Allo ca ted C IO Ar ea W ords Software s witches, De viceNet Unit status, and error data are all ocated in the CIO Area according to the uni t number , as s hown below .
60 Allocated CIO Area W ords Secti on 3-2 3-2 Al located CIO Area W ords Data is stored at t he offset positions s ho w n in the f igure bel o w s tar ting from the first word allocated to t he Unit in the CIO Area.
61 Allocated C IO Area W ords Secti o n 3 -2 • Unit status area 2 (w ord n+11) • Master Status 1 (word n+12) W ord n [n = CIO 1, 500 + (25 x unit numb er)] Bit Na me Statu s Co n- tr olled by Unit.
62 Allocated CIO Area W ords Secti on 3-2 02 Re mote I/ O Com- munica- tio ns Sta r t Switch OFF → ON User Sta rts r em ote I /O com mun icati on s .
63 Allocated C IO Area W ords Secti o n 3 -2 06 Master Enabl e Switch OFF → ON User Enabl es mast er commu nicat ion s. (The Unit automat i- ca lly r est ar ts.
64 Allocated CIO Area W ords Secti on 3-2 11 Master User-set Alloca- tions Switch OFF → ON User Reads se t up data from the Mast er Us er Alloc ations Setup T a b le (w ords m+1 t o m+7) in the DM Area and regis ters the sca n lis t. ( The Unit au tomati call y r estarts.
65 Allocated C IO Area W ords Secti o n 3 -2 3-2-2 S oftwa re S wi tches 2 (W o r d n +1) All s w itches are turne d ON by the user . The Unit au tomatically tur ns them OFF afte r the function is ex ecuted.
66 Allocated CIO Area W ords Secti on 3-2 06 Slav e Enabl e Switch OFF → ON User E nable s slav e communi cati ons . (The Unit aut omatical ly res tar ts. ) T o use fix ed al locat ions , turn thi s swi tch ON af ter tu r ning ON a Slav e Fixe d Allocat ion Setti ng Switch ( wor d n+1, bit s 08 to 10) .
67 Allocated C IO Area W ords Secti o n 3 -2 08 Slav e Fix ed Allo- cat io n Se t- ting 1 Switch OFF → ON Us er Al lo cat e s th e fol low i ng wo r ds t o th e sl ave.
68 Allocated CIO Area W ords Secti on 3-2 11 Slav e User Alloca- tions Switch OFF → ON User Reads s et u p data fr om the Sl a ve User Al locat ions Set up T able in th e DM Area and reg ister s slav e us er-set all oca - ti ons .
69 Allocated C IO Area W ords Secti o n 3 -2 Note 1. When the Master func t ion is en abl ed , the Un it Setup File ca nnot be backed up unless the scan list is enabled. 3-2-3 Ma st er CO S Se nd Swi tches (W ords n+ 2 to n +5 ) One Ma ster COS Send Switch is a llocated to ea ch slav e node ad dress.
70 Allocated CIO Area W ords Secti on 3-2 Remote I/O communications will restar t if a user turns OF F a bit that is ON. More t han one of t hese switches may be tur ned ON at the same time. If the s witch for a slav e that is n ot using remot e I/O com munications is tur ned ON, it will be ign ored.
71 Allocated C IO Area W ords Secti o n 3 -2 3-2-5 U nit S tatu s 1 (W ord n +10 ) W ord n+10 [n = CI O 1,50 0 + (25 x unit number)] Bit Na me Sta tus C ont rolled by Unit oper ation 00 Unit Er ror Flag ON Unit Displa ys De vice Net Unit oper a ting error s .
72 Allocated CIO Area W ords Secti on 3-2 3-2-6 U nit S tatu s 2 (W ord n +11 ) W ord n+11 [n = CI O 1,50 0 + (25 x unit number)] 07 Network P ow er Er ror Flag ON Unit Indicate s that ther e is no pow er from the net wo r k pow er supply .
73 Allocated C IO Area W ords Secti o n 3 -2 01 Re mote I/O Communi ca- tions Flag ON Unit Indic ates t hat r emot e I/O c ommuni catio ns are bei ng perf or med f or the master fu nctio n. Norm a lly , the Unit will perf or m remote I /O commun ica- tions au tomati cally .
74 Allocated CIO Area W ords Secti on 3-2 3-2 -7 Mas ter St at us 1 (W o r d n +12 ) W ord n+12 [n = CI O 1,50 0 + (25 x unit number)] Bit Na me Sta tus C ont rolled by Unit o perat ion 00 V erificat .
75 Allocated C IO Area W ords Secti o n 3 -2 3-2 -8 Mas ter St at us 2 (W o r d n +13 ) The le ftmost eight b its indi cate the s tatus of m aster I /O allocations.
76 Allocated CIO Area W ords Secti on 3-2 3-2-9 S la ve S tat us 1 (W ord n +14 ) W ord n+14 [n = CI O 1,50 0 + (25 x unit number)] Bit Na me Sta tus C ont rolled by Unit o perat ion 00 to 01 Reserved.
77 Allocated C IO Area W ords Secti o n 3 -2 11 COS Send F ailed Flag ON Unit Indicate s t hat an a ttempt w as made to sen d COS to a Master us ing the Slav e COS send swit ch (Sla ve CO S Se nd Switch in n+1) i n Software Switche s 2, b ut t he trans mis sion f ailed.
78 Allocated CIO Area W ords Secti on 3-2 3-2-1 0 S la v e St atus 2 ( W o rd n+15 ) Master Node Addresses This indicates the node ad dress of the remote master for slav e commu nica- tions. Slave I/O Allocation Statu s This indicate s the I/O allocation status of the slav e .
79 Allocated C IO Area W ords Secti o n 3 -2 3-2-1 2 Nor mal Sl a ve T a ble (W ords n+20 to n+23 ) This tabl e indicates the slav es tha t are c ommunicating nor mally with the mas- ter . The bits correspond to node addresses. The bits f o r sla ves f or which nor- mal I/O conne ctions hav e been made are tu rned ON in this table.
80 Allocated CIO Area W ords Secti on 3-2 Note Although the bit configurations are the same, the w ord addresses are diff erent (because this is a CS/CJ-series CPU Bus Unit). Change t he words using a replacement o peration from the Programming Device.
81 Allocated DM Area W ords Se cti o n 3 -3 3-3 Al located DM Area W ords Data is stored at t he offset positions s ho w n in the f igure bel o w s tar ting from the first word allocated to t he Unit in the DM Area.
82 Allocated DM Area W ords Secti on 3-3 Note If t he setting is smal ler t han the optimum commun ications cycle time calcu- lated by the Unit and stored internal ly in the Unit, then the v alue calculated by the Unit will be us ed.
83 Allocated DM Area W ords Se cti o n 3 -3 Note Make sure the CPU Unit is in PROGRAM mode and the master fun c tion is enabled bef ore y ou set these v alues. Note See A llocation Size Setup T able (p . 84) for more details on the first word of t he allocation size setup tab le.
84 Allocated DM Area W ords Secti on 3-3 Sett ing R esu lts 3-3-3 Allo ca tion Siz e Se tu p T able The fol lowing allocation size setup tables must be set in the I/O mem ory in the CPU Unit t o use the Master User Allocations Setup T a bl e.
85 Allocated DM Area W ords Se cti o n 3 -3 Sett ing Example The f o llowing e x ample shows the allocation when the siz e (bytes) f or OUT bl ock 1 and IN block 1 is set in the allocation s iz e setup table using the s peci- fied values.
86 Allocated DM Area W ords Secti on 3-3 Areas and W or d Ranges Sett ing R esu lts Name Range Details Slav e OUT 1 are a See Areas and Wo rd Ranges . Speci fies t he OUT 1 area. The OUT 1 area i s not av ailab le if t his is se t at 0. First wor d in the Sla ve OUT 1 area Speci fies the fir st wor d in t he OUT 1 ar ea.
87 Allocated DM Area W ords Se cti o n 3 -3 3-3-5 C ommunic at ions Cycle T ime Refer e nce T a ble This table can be used to a ccess the presen t, maximum and minimum com - mun icat ions cycle times .
88 Allocated DM Area W ords Secti on 3-3 Ranges Areas and W or d Ranges 3-3-7 S la ve U ser-s et Allo ca tion s Refer ence T able The slav e block setti n gs can be accessed in the S lav e User-set Allocations Ref erence T able .
89 Allocated DM Area W ords Se cti o n 3 -3 Note OUT2 is not used. Ranges Areas and W or d Ranges 3-3-8 Slave D eta ile d Stat us The status of the s la v es controlled by the master function of the Unit is pro- vided b y node address. Each word provides t he status of two slav es.
90 Allocated DM Area W ords Secti on 3-3 03, 11 Slav e Rem ote I /O Communi ca- tions Error Flag ON Unit Indic ates t hat an error has occur red in remot e I/ O c ommuni cati ons wi th t h e S lave. This bit turns ON if a timeout occ urs in at least one conne ction wi th multi ple conne ctions set.
91 SECTIO N 4 Remo te I/O Master Comm unication s This s ectio n descr ibes th e remote I/O communic ation s perform ed as a De viceNet ma ster by the Dev icene t Unit. 4-1 Mas te r R emo te I/O C omm un icat ion s . . . . . . . . . . . . . . . . . . .
92 Mas ter Remote I/O Communications Secti on 4-1 4-1 Master Remote I /O Co mm unications Remote I/O c ommunications are used to autom atically transfer data between sla ves and the CP U Unit without any special programming in the CPU Unit under which the Master Unit is moun ted.
93 Master R emote I /O Commu nications Se cti o n 4 -1 Fix ed Allocat ions Any one of the three areas below can be specified as the words allo c a ted in the CIO Area f or fix ed all ocations. The output (OUT) bloc k and the input (IN) bl ock are allocated strictly in order o f node add resses in one of the areas s how n b e l ow.
94 Mas ter Remote I/O Communications Secti on 4-1 The OUT and IN b loc ks wi ll be allocated in order of slav e node addresses. Each bloc k is a m a x imum of 500 words. Each address is allocated at least one b yte (rightmo s t). • More than one word is allocated for each sla ve with more t han16 I/O points (accordi ng to its node add ress).
95 Master R emote I /O Commu nications Se cti o n 4 -1 4-1-2 Rem ote I/O Mast er S pecif icati ons Item Spec ifica tions Sl ave al lo c a- tion met hods Fix ed allo- cat io ns Selec t one of the f oll.
96 Mas ter Remote I/O Communications Secti on 4-1 4-1-3 P reca ution s on t he Numb er o f Ma ste r U nits The fol lowing system con fi gurations can be constr ucted based on various numbers of Master Units when De v iceNet Units are used.
97 Master R emote I /O Commu nications Se cti o n 4 -1 4-1-4 P r oce dur e f or Usi ng Re mote I/ O Mas ter Fixed Allocations f or Remote I/O 1,2,3. .. 1. T ur n ON the communicat ions , slav e , and PC power supplies. Note T ur n ON the com munications power supply pr ior to tur ning O N the sla ve po wer supply or the slav es ma y not go online .
98 Mas ter Remote I/O Communications Secti on 4-1 3. T urn O N the Master En ab le Switch (word n bit 06). (The master will remain enabled ev e n if the power is turn ed OFF and ba ck ON aga in.) Note Ex ecute this only when master comm unications are turned OFF .
99 Scan Li st Se cti o n 4 -2 nect/Connec t Switch for that slav e (words n+6 t o n+9). This can be do ne when a slave i s replaced o r to regi s ter a slav e in the s c an li st in prepara- tions to conn ect it t o the networ k at a later time.
100 Sc an Li st Secti on 4-2 Creating th e Scan List The wa y that a scan li s t i s prepared varies with the a llocation method as s how n b e l ow. Note 1.
101 F ixed Allocations Se cti o n 4 -3 you di sable the scan list with a Master Unit that i s set for user-set allocations. P ar tic ularly when multiple Master Units are connected to a single n etwor k, c ommu ni cation s w ill no t be perfor me d suc - cessfully if e ven one Master Unit on the n etwork is oper ating with the scan list disabled.
102 F ixed Allocations Secti on 4-3 Note More than one Master Unit can be included in a single PC with f ixe d alloca- tions, as s ho wn bel ow (3 U nits max.
103 F ixed Allocations Se cti o n 4 -3 Fixed Allocations Area 1 OUT bloc ks are allocated to slav e s from CIO 3200 to CIO 3263 and IN bloc ks are allocated to sla ves from CIO 3300 to CIO 3363. Fixed Allocations Area 2 OUT bloc ks are allocated to slav e s from CIO 3400 to CIO 3463 and IN bloc ks are allocated to sla ves from CIO 3500 to CIO 3563.
104 F ixed Allocations Secti on 4-3 Fixed Allocations Area 3 OUT bloc ks are allocated to slav e s from CIO 3600 to CIO 3663 and IN bloc ks are allocated to sla ves from CIO 3700 to CIO 3763. The S la ve allocation order is fix ed in the output (OUT ) and IN b lock s star ting from address 0.
105 F ixed Allocations Se cti o n 4 -3 4-3-3 C han ging Sys tem C om pon ents The scan list must be cleared in the f ollo w ing sit uations : • Adding a slav e • Removing a sla ve • Changing a node address T ur n OF F the Scan List Clear Switch (word n, bit 01) to cle ar the scan l ist.
106 F ixed Allocations Secti on 4-3 Resulting Slave Al lo cati on T urn ON t h e Sc a n Li st Ena ble Swi tc h T ur n ON the Scan List Enable Switch (word n, bit 00, CIO 150000 in this exam ple).
107 User- set Allocati ons Se cti o n 4 -4 4-4 User -set Allocations With a CS/CJ-s eries Dev iceNet Unit, remote I /O communications slaves can be allocated in an y a r ea (CIO , WR, HR, DM, or EM) usi ng one of t he fol lowing me tho ds.
108 User-set All ocations Secti on 4-4 • The first bit f or node allocations is alw ays bit 00 when s etting alloca- tions with the alloca t ed DM A rea words, b ut can be either bit 00 or bit 08 with the Con fi gurator . ( Allocations f or slav e s with two bytes or more cannot star t at bit 0 8.
109 User- set Allocati ons Se cti o n 4 -4 Procedure Step 1: T ur n ON t he Master En abl e Switch Make sure that master communicat ions ha ve disabled by checking to see if Master Enable F unction Flag (word n+11, b it 03) is OFF and then t urn O N the Master Enable Switch (word n +14, bit 06) to enabl e master communications.
110 User-set All ocations Secti on 4-4 Step 4: T urn ON the Slave User Allocations Sw itch T ur n ON the Slav e User allocations Switch (word n, bit 11).
111 User- set Allocati ons Se cti o n 4 -4 4. Mu ltiple masters cannot share the same sla ve . 5. B e sure to use user-set allocations and operat e the Master Unit with the scan list enabled if multiple masters are c onnected to a single ne twork.
112 User-set All ocations Secti on 4-4 Allo cati on S ize Setu p T able Resulting S lave Allocations T urn ing ON the Master User Allocations Switch T ur n ON t he Master Us er Allocations S wit ch (w ord n, bit 11, CIO 15 0011 in this example).
113 User- set Allocati ons Se cti o n 4 -4 Setting through the Co nfi gur at or Slav es can be allocated words i n any order f or the fol lowing b locks: OUT bl ock 1, OUT bloc k 2, IN block 1, and IN b lock 2.
114 User-set All ocations Secti on 4-4 Pr o cedure St ep 1 Set the area, star t word, and words allocated for each b lock u s ing th e Config- urator . St ep 2 Allocate words to all n ode addres s es in eac h bloc k as shown bel o w usi ng the Configurator .
115 User- set Allocati ons Se cti o n 4 -4 d) The s tar t bit f or node addres ses can be bit 00 or bit 08. If it is bit 08 howe ver , 2 or more bytes cannot be allocated as shown below .
116 Startin g and Stoppin g Re mote I/O Commun ications Secti on 4-5 Co nfi gur at or S ett in g Met hod s Ref er to t he DeviceNet Configurator Operation Manual (W382) f or setting me tho ds.
117 Example o f Ladder Programm ing for Remote I /O Communications Se ct io n 4 -6 Note Ev en if there is a commun ications error with the slav e, the slav e input dat a is sav ed in t he allocated area.
118 Error s that May Occur i n Re mote I/O C ommunic ations Secti on 4-7 4-7 Err ors that May Occur in Remote I /O Com m u nications The followi ng errors may occur duri ng remot e I/O communications.
119 Error s that May Occur in R emote I /O Commun ications Sec tio n 4 -7 Note Rem ote I/O com mu nicat ions w ill s top (7-s egm ent d isplay: A0) if DI P swit ch pin 3 on t he front panel is tur ned ON to specify stoppi ng remote I/O com muni- cations for I/O com munications e r rors.
121 SECTIO N 5 Remote I/O Sl a v e Comm unication s This s ectio n descr ibes the remot e I/O communic ation s performed as a Devic eNet sla v e by the Devi c eNet Unit. 5-1 Sl a ve R e mote I /O Co mm uni cati on s . . . . . . . . . . . . . . . . . .
122 Slav e Remote I/O Communications Secti on 5-1 5-1 Sla ve Remo te I/O Co mm unications A CS/CJ-series DeviceNet Unit can function as a Sla ve Unit in remote I/O communications a nd a s ingle CS/CJ-seri es De viceNet Unit can function as both a Mast er Unit an d a Slave Unit.
123 Slav e Re mote I/O Communic ations Sec tio n 5-1 5-1-2 Rem ote I/O and Slave C om munica tion s Spec ific atio ns 5-1-3 Proce dures for Usin g Remo te I/O Slave Comm un icatio ns Fixed Allocations f or Remote I/O 1,2,3. .. 1. T ur n ON the communicat ions , slav e , and PC power supplies.
124 Slav e Remote I/O Communications Secti on 5-1 munications, allocate areas, and then en able slav e commun ications. The allo- cated areas will not be v alid if the procedure is done in any ot h er order . User- set Remo te I/O Allocatio ns Using DM Are a Setting s 1,2,3.
125 F ixed Allocations Se cti o n 5 -2 Note 1. Enable slav e com munications in CS 1W -DRM21 or CJ1W-DRM21 proper- ties if t he Configurator is used. 2. Us e Configurator V er . 2.10 or later f or the C J1W -DRM 21. 5-2 F ixed Allocations 5-2-1 Allo ca ted W ords Wo rds in t he CS / CJ-seri es De viceNet C IO Area in the CP U Unit are allocated.
126 User-set All ocations Secti on 5-3 Fixed Allocation Area 1 Fixed Allocation Area 2 Fixed Allocation Area 3 5-3 User -set Allocations With a CS/CJ-s eries Dev iceNet Unit, remote I /O communications slaves can be allocated in an y a r ea (CIO , WR, HR, DM, or EM) usi ng one of t he fol lowing me tho ds.
127 User- set Allocati ons Se cti o n 5 -3 2. Onl y two bloc ks (OUT 1 and I N 1) can be allocated w hen setting are ma de with the allocated DM Area words area, b ut there are three blocks (OUT 1 and IN 1/2) av ailable wit h the Configurator .
128 User-set All ocations Secti on 5-3 • Areas and W or d Ranges for the OUT 1/IN 1 Areas Step 3: T urn ON the Slave User Allocations Sw itch T ur n ON the Slav e User Allocations Switch (word n+1, bit 11). Step 4: T urn ON the Slave Enable Switch T u rn ON the Sl ave Enable S witc h (wo rd n +1, b it 06) .
129 User- set Allocati ons Se cti o n 5 -3 • Slave User Allocations T able • Slave areas Step 1: T urn ON the Slave User Allocations Sw itch Make sure that sla ve communications have st opped pr ior to perf or ming this operation. T u r n ON the S lave Us er Allocations Switch (word n+1, bit 11: CIO 1 50111 in this e xample).
130 User-set All ocations Secti on 5-3 Setting through the Configur ation A m aximum of three blocks can be allocated at any location s in I/O mem or y f or t he output (OUT) area bl ock 1, input (IN) area b lock 1, and input (IN) area blo ck 2 . The block allocation order an d bloc k allocation areas can be set as required.
131 User- set Allocati ons Se cti o n 5 -3 Connection T ypes and A llocated I/O Areas The fol lowing table sho ws the relation s h ip betw een various c onnec tion combi- nations and the allocated a reas that are appl icab le with those c onnections. Note 1.
133 SECTIO N 6 Messag e Communicatio ns This s ect ion describe s me ssage communi catio ns us ing FINS comm ands se nt from the l a dder pr ogram in t he CPU Unit of the P C. 6-1 Ove rvi e w . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
134 Overview Secti on 6-1 6-1 Overview Messag e commun ications en ab le m essages to b e set between nodes on a De viceNet network when required by system conditions. The messages can be sent between P Cs, between a n OMRON PC and a mas ter made by another comp an y , or between slav es.
135 Overview Se cti o n 6 -1 Overall Stru cture Note If only the messag e communi cations func tion is bei ng use d and the remote I/ O communi cations function is not bein g used, message com munications are possible ev en if the master function is disabl ed.
136 Overview Secti on 6-1 Note 1. The D e viceN et Unit must be registered in the lo cal network routing table of the CS/CJ-ser ies PC when two or more Communications Units (includi ng the DeviceNet Unit) are m ounted t o a CS/CJ-ser ies PC. The comm ands will not be sen t if the Unit is not registered in the routing tables.
137 Overview Se cti o n 6 -1 Sending FINS Message Communicati ons Receiving FINS Message Com mu nications Note C200H-series DeviceNet Master Units (C200H-DRM21-V1 ) and CV M1/CV - series D e vi c eNet Mas ter Units (CVM1-DRM21-V 1) both suppor t FIN S mes- sage communications but it is ex ecuted by a special OMRON met hod.
138 Overview Secti on 6-1 Note A specific F INS command (command 2801 ) is used to send e xplicit mes- sages. Note A speci fic FINS com mand (comman d 2801) is u sed to send explicit messa ges.
139 Overview Se cti o n 6 -1 6-1-5 Me ssag e Co mmunica tio ns E rror In dicat io ns There are two wa ys to obtain inf orm ation on communications errors that occur in message com munications: 1) Using the error histo ry in the DeviceNet Unit and 2) Using De v iceNet Unit displa ys, indicators, and Master Status Areas.
140 Overview Secti on 6-1 6-1-6 Me ssag e M onit orin g Tim er A message moni toring timer m onitors responses for t he DeviceNet U nit. A timer can be set f or each device t hat will be communicated with (each mes- sage destination). Messag e monitor ing timers are sup por ted for both ex plicit m essage an d FINS message c ommunications.
141 FINS C ommands an d Responses Se cti o n 6 -2 termeas ures and errors recorded in e rror histor y that are not shown by the indicators. Note 1. The 7-segment displa y alternat ely displa ys the error and the mas ter node address w here the error occurred.
142 FINS C ommands an d Response s Secti on 6-2 Ref er to SYSM A C CS/ CJ Series Co mm unica t ion C omm ands Reference Man- ual (W342 ) f or details on FINS comm ands . 6-2-2 S endi ng/R ecei vin g FIN S Comman d/ Res pon ses FINS commands are s ent using the CMND(490) instr uction f or CS/CJ-series PCs.
143 FINS C ommands an d Responses Se cti o n 6 -2 The m ain response codes are listed be lo w . Ref er to SYSMA C CS/CJ Ser ie s Communica ti on Com mands R ef erence Manual (W 342) for f urt her details on response codes, including sub-respon s e codes (SRES).
144 FINS C ommands an d Response s Secti on 6-2 Ref er to SYSM A C CS/ CJ Series Co mm unica t ion C omm ands Reference Man- ual (W34 2) f or inf or mat ion on FINS command s addres s e d to CS/CJ-ser ies PCs .
145 Using FINS Mess age Commun ications Se cti o n 6 -3 Commands Addressed to DeviceNet Units Command to Send Explicit DeviceNet Messages 6-3 Usi ng FINS Messag e Commu nications There are two instruction s that can be ex ecuted to send and receive data from CS/CJ-series CPU Units: SEND(090) and RECV (098).
146 Using FINS Message Communic ations Secti on 6-3 3. In all cases other than the follo wing two ex cep t ions, a local network table must be made, and the DeviceNet Unit m ust be registered in i t. a) When t here is on ly one DeviceNet Unit. b) When only m ultiple Dev iceNet Units are m ounted, with no re mote I/O communications.
147 Using FINS Mess age Commun ications Se cti o n 6 -3 The unit n umbe r of the De viceNet Uni t as a CPU Bus Unit is the number set on the rotar y switches on the f ront pane l (0 to 15). T he network a ddress is the address of the N etwork to which the CPU Bus Unit is connected (1 to 127).
148 Using FINS Message Communic ations Secti on 6-3 4. Us e the left-side table to create the local network table. Input the unit num- bers and corresponding local network addresses. 5. Us e the right-side table to cr e at e the rela y network tabl e .
149 Using FINS Mess age Commun ications Se cti o n 6 -3 Note 1. Indicates a Unit as sho w n in the f ollo wing table. 2. V alues of $00 to $3F indicate nodes 0 to 63. 3. Des ignates the length of time that the PC retr ies transmission when bit 15 of C+3 is OFF and no response is received.
150 Using FINS Message Communic ations Secti on 6-3 Note 1. Indicates a Unit as sho w n in the f ollo wing table. 2. V alues of $00 to $ 3E ind icate nod es 0 to 63. 3. Des ignates the length of time in (0.1-s units) that the PC retr ies tr ansmis- sion when bit 15 of C+3 is OFF and no response is received.
151 Using FINS Mess age Commun ications Se cti o n 6 -3 Note 1. Indicates a Unit as sho w n in the f ollo wing table. 2. V alues of $00 to $ 3E ind icate nod es 0 to 63. 3. Des ignates the length of time in (0.1-s units) that the PC retr ies tr ansmis- sion when bit 15 of C+3 is OFF and no response is received.
152 Using FINS Message Communic ations Secti on 6-3 Co mm unic at io ns Fl ags Communications F lag Operation • The Network Enabled Flag turns OF F when instructions are being sent or received (from.
153 Using FINS Mess age Commun ications Se cti o n 6 -3 in the f ollow ing ta ble. Commu nica tions In structio ns Completi on Codes The status at the comp letion of the e xecution of network commu nications instructions is shown at the words indicated in the follo wing table , as FINS completion codes.
154 Using FINS Message Communic ations Secti on 6-3 Note 1. A000 to A477 in the A uxilia ry Area are wr ite-prot ected. 2. The re can b e up to 13 banks of EM Memory . Refer to the ope ration manual f or t he CPU Unit f or inf orm ation on whether it has EM Memor y and how many banks can be used.
155 Using FINS Mess age Commun ications Se cti o n 6 -3 Program Exa mple (021) MO V A503 D00006 11 A202 (021) MO V #0005 D00000 (021) MO V #0001 D00001 (021) MO V #0600 D00002 (021) MO V #0000 D00003 (025) ASL 0000 000 00 A202 00 0000 01 (071) BSET #1234 D01000 D01004 Sets 1234 in D01000 to D01004.
156 Using FINS Message Communic ations Secti on 6-3 Example 2: Sending a FINS Command U sing CMND Operati on • The PC with De viceNet Unit 1 with node a ddress 5 reads the data f rom the 5 w ords D01000 to D01004 from t he PC with De viceNet Unit 2 wi th node address 06.
157 Using FINS Mess age Commun ications Se cti o n 6 -3 Example Program 6- 3-6 C onn ec ting Ne tworks for FIN S C ommu ni catio ns CS/CJ-series De viceNet Units can perf or m FINS communications between networks.
158 Sending E xplicit Messages Secti on 6-4 When c onnecting net works, routing tables mu s t be registered f o r the PC CP U Units on all ne tworks. When conn ecti n g t wo or more communic ati on un.
159 Sending E xplicit Mes sages Secti o n 6 -4 6-4-1 S endi ng E xplic it Messag e s The FINS com mand code 28 01 can be used to sen d e xplicit De viceNet mes- sages to OM RON sla ves and Dev iceNet de vices made by other manufactur- ers. The u se of e x plicit mes sages i s illustrated in the f ollowing diagr am.
160 Sending E xplicit Messages Secti on 6-4 The fol lowing diagram sh o ws an e xample of ac tual node addres s specifica- tions. Note Depending on condit ions , the destination slav e may not alwa ys a ccept an expl icit message. Alwa ys perform ret r y processing when sendi ng e xplicit mes- sages.
161 Sending E xplicit Mes sages Secti o n 6 -4 P arameters Desti nation n ode address (comma nd): The node address of the des ti nati on of the e xplicit message.
162 Sending E xplicit Messages Secti on 6-4 D: Firs t response word C: Firs t control data word Comma nd data is set in order st ar ting with the wo rd specified f or the CMND(490) operand S (first command word) and continuing with words with higher addresses in I/O memo ry in the command block f orm at.
163 Sending E xplicit Mes sages Secti o n 6 -4 The respons e f o r mat data i n serv ice data that is in word (2-byt e) or double- word (4-byt e) units, such as word data an d ERROR CLEAR codes, is al.
164 Sending E xplicit Messages Secti on 6-4 Settings (He x). D00000 = 000 9: Number o f command bytes D00001 = 000 A: Number o f response byt es D00002 = 000 1: Destination network ad dress: 1 D00003 .
165 Receivin g Explicit Messages Se cti o n 6 -5 Program Exa mple 6-5 Receiving Explicit Messag es This CS/CJ-seri es De viceNet Unit contains a PLC Ob je ct. The Unit will receive messages add ressed to t he PLC Object, proces s ser vice reque s ts addressed to the CPU Unit, an d retur n responses.
166 Recei ving Explicit Messages Secti on 6-5 • PCs wi th CVM1/CV -ser ies De viceNet Master Uni ts (CVM1-DRM21-V1) • PCs wi th CS/CJ-series De viceNet Units Example Note Status and the I/O memor y read/write operations ca nnot be perf orm ed f or PCs with a C200 H- ser ies or CVM1/CV -ser ies De viceNet Master Units .
167 Receivin g Explicit Messages Se cti o n 6 -5 I/O Memo ry Read/Write f or CPU Units The com mands and respons es f or the explicit mess ages that c an be sent and received are descr ibed on the f oll o wing pages. Note In the f oll o wing comm and and response f or mats, all bo x es repre- sents 1 byt e.
168 Recei ving Explicit Messages Secti on 6-5 CPU Inf o r matio n Read (Serv ice Co de: 0E He x) Reads CPU Unit information , including op er ating mode, fat al/non-f atal errors, and the CPU Unit mode l.
169 Receivin g Explicit Messages Se cti o n 6 -5 Read d ata (respo nse): The specified inf orma tion is returned in order . • CPU Un it operat ing mode (at tribute ID = 64 Hex).
170 Recei ving Explicit Messages Secti on 6-5 Response Bl ock P arameters Desti nation node address (co mmand): The no de address of th e CS/CJ- series DeviceNet Un it to whi ch to wr ite data, spe cified in 1-byte (2 di git) he xa- decimal. Service co de (comm and, response): 10 Hex i s specified f or comm ands.
171 Receivin g Explicit Messages Se cti o n 6 -5 Note Error clear codes are 1-word (2-byte) data, so the a bo ve codes are specified with the low byte fir st. The low to high bytes f or the above codes a re set as hi gh to l o w bytes in I/O memor y , when s etting the codes as dat a f o r operand S of C MND(490).
172 Recei ving Explicit Messages Secti on 6-5 CPU Unit Status Read (Ser vice Code: 40 Hex) This PLC Object ser vice reads status details (operation status, operating mode, fatal and non-f atal errors, etc.
173 Receivin g Explicit Messages Se cti o n 6 -5 • Operati on statu s: Retur ns the operation status of the CPU Unit in 1-b yte (2-digit) he xadecimal. • Operati ng mode: Retur ns the operating m ode of the CPU Uni t in 1-b yte (2-digit) he xadecimal.
174 Recei ving Explicit Messages Secti on 6-5 • Messag e Ex ists/Does Not Exist: W hen t h e MSG ins truc ti o n i s e x e cu t ed by t he CPU U nit, the bit co r respo nding to the mes sage number w ill tur n ON and be return ed in 2 b ytes (from low to high bytes).
175 Receivin g Explicit Messages Se cti o n 6 -5 Response Bl ock P arameters Desti nation node address (co mmand): The no de address of th e CS/CJ- series DeviceNet Unit from which to rea d data, s pecified in 1-byte (2 digit) hexadecimal. Service code (com mand , response ) : IC Hex is spec if ied for commands.
176 Recei ving Explicit Messages Secti on 6-5 W ord Data Re ad (Service Code : 1D He x) Wo rd Data Read reads I/O memor y area data in CPU Units wi th a CS/CJ- series DeviceNet Units. The rea d word data is in word units. The r e s pons e blo ck is retu r ne d fr om low to hi gh b yt e s.
177 Receivin g Explicit Messages Se cti o n 6 -5 No of Read W ords (command): The number of words of read data is speci- fied in 1-byte (2-digit) hexadecimal.
178 Recei ving Explicit Messages Secti on 6-5 Instance ID (comm and): Th e ty pe of me mor y are a to w h ich t he da ta will be written is specified in hexadecimal as shown in the f ollo wing t ab le. Address L, Address H (com mand): T he address of the fi rst word to which the data will be written is specified in hex adecim al as shown below .
179 Receivin g Explicit Messages Se cti o n 6 -5 Response Bl ock P arameters Desti nation node address (co mmand): The no de address of th e CS/CJ- series De viceNet Unit to which the d at a is written, specified in 1-byt e (2 digit) hexadecimal. Service co de (comma nd, response): I F Hex is specified for commands.
181 SECTIO N 7 Other Fu ncti ons This s ectio n descr ibes conne cting to CX-P rog rammer via the De viceNet and the Memory Card bac kup functi on. 7-1 Con ne ctin g t o the CX -Pr og ramm er vi a t he Devic eN et . . . . . . . . . . . . . . . . . . 18 2 7-1 -1 Set tin g N od e A dd resse s .
182 Connectin g to the CX -Programmer v ia the DeviceNet Secti on 7-1 7-1 Connecting to the CX-Pr ogr ammer via the DeviceNet With CX-Programme r V er . 2.1 o r later , a ser ial connection c an be mad e to a PC containing a CS/CJ-ser ies De vic e Net Uni t to f or m an online connection, via the De v iceNet, to other PC CPU Units on the net wor k.
183 Connecti ng to the CX-P rogrammer v ia the De viceNet Sec tio n 7 -1 7-1-1 S ettin g Nod e Addres se s When the CX-Programmer is connected online, it us es FINS message com- munications.
184 Connectin g to the CX -Programmer v ia the DeviceNet Secti on 7-1 2. Double-click on the node address (#) t hat you want to change, or select the node addres s an d clic k on t he Ed i t Butto n. A dialogue box li ke t he one be- low will appear .
185 Connecti ng to the CX-P rogrammer v ia the De viceNet Sec tio n 7 -1 response monitor t im e in the CM ND/SEND/RECV instruc tion t o be t he same as or slightly longer than the t ime f or the mess age monitor ing timer (Response monitor t ime in the CMND/SEND/RECV inst ruction ≥ me ss a g e monitori ng timer .
186 Memory Card Bac kup Function s Secti on 7-2 a maxim um of f o ur-f old (f or a com munications speed of 50 0 Kbps) i n com- par ison wit h connection b y a peripheral bus .
187 Memory Card B acku p F unctions Se cti o n 7 -2 7-2 - 1 Out l ine o f Fu ncti on s 1. Bac k in g Up Unit Setu p Files Sav es all inter nal Unit setu p data to the M emor y Card mounted to th e CPU Unit.
188 Memory Card Bac kup Function s Secti on 7-2 Note I f there is an error in the s etup data or if the file could no t be read, the File Read/Wr it e Error bit in Unit Status 2 (word n + 11, bit 08) will t ur n ON . 3. Sa v ing Files fr om Configurato r to M emory Card De vice parameter files (.
189 SECTIO N 8 Comm un ications T imin g This s ectio n descr ibes th e time requi red for re mote I/O communi cati ons and mess age commun icati ons. 8-1 Rem ot e I /O Com m un icat ion s Cha rac te rist ics . . . . . . . . . . . . . . . . . . . . . .
190 Remote I /O Commu nications Charac teristics Secti on 8-1 8-1 Remote I /O Communications Characteristics This section descr ibes the characteri stics of remote I/O communications when the De viceNet Unit is used as a mas ter in combination with OM RON ’ s sla ves .
191 Remote I /O Commu nications Charact eristics Se cti o n 8 -1 Co mm unic at io ns Cyc le Ti me Ca lcu l atio n Use the e quations shown below to calcul ate the com munications cy c le t ime (T RM ) for a network with on e Master .
192 Remote I /O Commu nications Charac teristics Secti on 8-1 Slaves with More Than 8 Byt es of In put or Out put T RT = T OH + T BY TE-IN × B IN + T BYTE -OUT × B OUT [ms ] T OH : Protocol overhead.
193 Remote I /O Commu nications Charact eristics Se cti o n 8 -1 T IN : The Input S lav e ’ s O N (OFF) delay T OUT : T he O utp u t Slave ’ s ON ( OFF) dela y T RM :N e t w o r k ’ s communications cycle t ime (See page 191.) T PC :T h e P C ’ s cycle time (See note belo w .
194 Remote I /O Commu nications Charac teristics Secti on 8-1 Minim u m I/O Re sponse Time The minimum I /O response time occurs when th e Sla ve ’ s I/O re freshing is ex ecuted just after the i nput signal is received b y the De viceNet Unit and the output s ignal is out put a t the be ginning o f the next I/O ref resh cycle.
195 Remote I /O Commu nications Charact eristics Se cti o n 8 -1 Note Although in the abov e diagram the Slav e s are separated into two gr o ups for conv enience, the actual ph ysical positions in the Networ k are irrele v ant.
196 Message C ommunicat ions Secti on 8-2 This progr amming is f or a DeviceNet Unit with a unit number of 00. Note Ref er to 3-2 Allocated CIO Area W ords f or details on the Mas ter S tatus Area.
197 Message C ommuni cations Se ctio n 8 -2 Note 1. If the CPU Unit attempts to send another messag e or recei ves a message from ano ther node within the mess age commu nications time, the second messag e or the message bei ng received from another no de may be de- stro yed.
198 Message C ommunicat ions Secti on 8-2 Shown below is the response time required to return data for 100 w ords. • BYTE DA T A RE AD req uest sendin g time: T BRS Devi ceNet header (4 bytes) + P a.
199 SECTIO N 9 T rou ble s hoot in g and Ma inte na nc e This s ecti on desc ribes error proc essing , period ic ma int enance ope ration s, and troub lesho oting proc ed ures neede d to k eep the De viceNet networ k operati ng prop erly .
200 T roubleshooting with the DeviceNet Unit Indicators S ecti on 9-1 9-1 T roubleshooting with the De viceNet Unit Indicators 9-1-1 D eter mini ng Ope ratin g S tat us fro m th e Ind ica tors The fol lowing tab le shows the status of the MS and NS indicato r s and the 7- segment display during nor mal operation.
201 T r oubleshooting with th e DeviceN et Uni t Indica t ors Se cti on 9 -1 9-1-2 T roub lesho otin g Errors Occurr ing in th e Devic eNe t U nit Note 1. The 7-s egment di spla y will alt er nate bet ween the Uni t ’ s node address and the code given in t he tables in t his sec ti o n.
202 T roubleshooting with the DeviceNet Unit Indicators S ecti on 9-1 remote I/O com munications f or a communications error , two errors can be di sp l a ye d: T he s l av e ’ s communication s error a nd its most r e c ent error .
203 T r oubleshooting with th e DeviceN et Uni t Indica t ors Se cti on 9 -1 Correction Set the slav es ’ node addres ses ag ain. Structu re Error: I/O Area Rang e Exce eded Likely Cause The slave ’ s I/O area isn ’ t within the allowed range. (Occurs with the scan list disabled.
204 T roubleshooting with the DeviceNet Unit Indicators S ecti on 9-1 Flags Allocated f or C200H DeviceNet Maste r Unit (CIO n+24) Bit 14 (E rror Flag) and bit 07 (Comparison Error Flag) will be ON.
205 T r oubleshooting with th e DeviceN et Uni t Indica t ors Se cti on 9 -1 Correction Inspect the sla ve and then c re ate the scan list again. V e rificati on Error: I/O Siz e Mis m at ch Likely Cause The slave ’ s I/O data size does not m atch the registered s can list.
206 T roubleshooting with the DeviceNet Unit Indicators S ecti on 9-1 De viceNe t Unit Respo nse Records the error in the error log. The mast er w ill per iod ica lly at temp t to re conn ec t with the sl av e wit h the v er ifi- cation e r ror .
207 T r oubleshooting with th e DeviceN et Uni t Indica t ors Se cti on 9 -1 • Matching m aster and slav e bau d rates • Proper cable lengths (tru nk and branch li nes) • Br ok e n or l o os e c.
208 T roubleshooting with the DeviceNet Unit Indicators S ecti on 9-1 Likely Cause The setting operation f a iled because a structure error occurred. De viceNe t Unit Respo nse The only respons e is the error co de display ed on the 7 - seg ment display .
209 T r oubleshooting with th e DeviceN et Uni t Indica t ors Se cti on 9 -1 return to nor ma l when the network p ower supply is restored, although scan- ning w ill no t re sum e if the Device Net Un it i s set t o stop rem ote I /O com mu ni- cations wh en a c ommunications error occurs.
210 T roubleshooting with the DeviceNet Unit Indicators S ecti on 9-1 De viceNe t Unit Respo nse Records the error in the error log. • The Unit wi ll g o off – line and communicat ions will be di sabl ed. Error respons es w ill be return ed to all com munication s requests.
211 T r oubleshooting with th e DeviceN et Uni t Indica t ors Se cti on 9 -1 De viceNe t Unit Respo nse Records the error in the error log. Operation will continue using t he default message monitor ing t imer values.
212 T roubleshooting with the DeviceNet Unit Indicators S ecti on 9-1 Correction Clear the scan lis t and register the scan l ist ag ain or use the Configurator to reset the m aster sc an list. Memor y Access Error Likely Cause An error occurred in the Unit ’ s non-volatile memor y itself .
213 T r oubleshooting with th e DeviceN et Uni t Indica t ors Se cti on 9 -1 CIO Area Fla gs Allocated to DeviceNet Unit Bits 00 and 04 of n +10 (t he Unit Error Flag and Unit Memor y Error Flag) will be ON. Correction Replace the Unit i f the error r ecu r s.
214 T roubleshooting with the DeviceNet Unit Indicators S ecti on 9-1 De viceNe t Unit Respo nse Stops operation. Correction Set th e communications speed c orrectly an d restar t the Devi ceNet U nits. CPU Unit Faulty (H6) De viceNe t Unit Respo nse Records the error in t he error l og.
215 T r oubleshooting with th e DeviceN et Uni t Indica t ors Se cti on 9 -1 De viceNe t Unit Respo nse Continues processing but data e x chan ge wit h the CPU Unit is stopped . The routing tabl e is treated as missing. Records the error in the error log.
216 T roubleshooting with the DeviceNet Unit Indicators S ecti on 9-1 CIO Area Fla gs Allocated to DeviceNet Unit Bit 00 of n+10 (Uni t Error Flag) will be ON together with one of the fol lowing combinations: • Bit 05 of n+12 (the Mast er I/O Refresh Error Flag) an d bit 01 of n+10 (the Master Function Error Flag) ON.
217 T r oubleshooting with th e DeviceN et Uni t Indica t ors Se cti on 9 -1 • Retur ns an error response (0302 Hex) to comm ands requ iring a re- sponse.
218 Error L og Function s Secti on 9-2 • Installation of termina tors at both ends o f t he trun k line • Exce ssiv e noise U ni t Er ro rs Special Un it Error De viceNe t Unit Respo nse Records the error in the error log. Stops the Unit. Correction Restart the CPU Uni t.
219 Error Log F unctions Se cti o n 9 -2 When us ing the Co nfigurator , t he error log can be monitored with the master error his tor y read operation.
220 Error L og Function s Secti on 9-2 0101 T ransm issi on fai led beca use t h e local node is not pa rticipati ng i n t he n etw ork. FINS message com munica t ions co m mand : Bit 15: OFF Bits 14 .
221 Error Log F unctions Se cti o n 9 -2 Note T he error inf or mati on is no t writt en to EEPR OM when a memor y err or o ccurs in t he error log area (E EPROM).
222 T roubleshooting S ecti on 9-3 9-3 T ro ubleshooti ng 9-3-1 CP U Un it ’ s ERR/A LM In di cat or Li t or Fl a shi ng Use the fo llowing table to troubl eshoot the network w hen the DeviceNet Unit is moun ted and the CPU Unit ’ s ERR/ALM indicator is li t or flashing.
223 T roubleshooting Se ctio n 9 -3 9-3-3 I/O Link Problems Use the f ol lo wing table to t roubleshoot I/O Link problems. The Devi ceNet Uni t ’ s MS indi cator is ON and green, bu t the NS indicat or con tinu es to flash green. (The NS indi cator normally goes ON 2 s after the MS in dicato r .
224 T roubleshooting S ecti on 9-3 9-3 -4 Co mm uni cati on s Er ro r Op er at i on Se tti ngs Use the f ollowing table to correct problems with the DIP switch setting for con- tinuing/stopping communicat ions f or errors. 9-3-5 S can L ist P roblem s Use the f ol lo wing table to t roubleshoot scan list prob lems.
225 Maintenan ce and Replacement Se cti o n 9 -4 9-4 Maintenance and Repl acement This sec ti on des cribes the routine c leanin g and inspec tion recomm ended as regular maintena nce as well as the Unit replacement procedure required if a De viceNet Unit f ails .
226 Maintenan ce and R eplacement Secti on 9-4 9-4-3 Rep lacin g F ault y Units Replace a f aulty De viceNet Un it as soon as possible. Refer to the Devi ceNet Slav es Operation Manual (W3 47) for details on replacing sla ves . We recom- mend having spare Units av ailab le to restore network operation as quickly as po s s ibl e.
227 Maintenan ce and Replacement Se cti o n 9 -4 Creating a New Netw ork File Use the f ollowing procedu r e to wr ite the settings to the DeviceNet Unit from a network file sav ed on a disk. 1,2,3. .. 1. T ur n ON power to the DeviceNet Unit, slav es , and the Configurator .
229 Appendix A Allocation Differences fr o m C200H Devi ceNet Master U nits The f ollowi ng table shows the CS1W-DRM21/CJ1W -DRM21 Devi ceNet Unit allocation areas that correspond to the C200HW -DRM21-V1 De viceNet Master Unit allocation areas.
230 Allocation Diff er ences from C200H Dev iceNet Master Units Ap pend ix A Status Areas Mast er S tatu s Ar ea 1 An area wi th the e xact same bit configurat ion as Master Status area 1 used f or C200H DeviceNet Master Units , was set up . This area is called the Master Replacement Statu s 1.
231 Allocation Diff erences from C200H Devic eNet Master Units Ap pendix A Communi - catio ns Er ror F lag IR 2 001+ (10 × unit No . ) Unit No . 0 to 9: I R 101+(10 × unit No . ) Unit No . A to F : I R 401+(10 × unit No . – 10) 06 Communi - cati ons Error Flag CIO 1524+ (25 × un it No.
232 Allocation Diff er ences from C200H Dev iceNet Master Units Ap pend ix A Mast er S tatu s Ar ea 2 Commu nicat ions Cycle T ime Pre sent V a lue Reg ister ed S lave T able Name C200H De viceNet Mas.
233 Allocation Diff erences from C200H Devic eNet Master Units Ap pendix A No rmal Sla ve T a b le Replacing Ladder Pr ograms fr om C200HW -DRM 21-V1 If ladder progr ams h av e already b een cre at ed.
234 Allocation Diff er ences from C200H Dev iceNet Master Units Ap pend ix A Replace t he addres ses as shown in t he fol lowing table. Mes sa ge Comm unicat ions in La d der Pr o grams Note I f there.
235 Appendix B Devi ceNet Co nnections Devi ceNet has sev er al diff erent protocols f or remote I/O communications between Master and Slav e de vices. Connections are units used to monitor those protocols. There are four kinds of DeviceNet remote I/O communications protocols (connections): P oll, bit – s trobe, COS (change of state), and cyclic.
236 DeviceNe t Connecti ons Ap pend ix B Connections Using Allocations Set ti ng Conne ction T ype The set ti n gs for remote I/O communicat ions connec tions differ depending o n the allocation m ethod, a s outlin ed below .
237 DeviceN et Connect ions Appendix B Note 1. Output data using p oll connections and out put data using COS or cy c lic connec tions are transmitt ed using the sam e frame. Theref ore set the sam e output size (b ytes) when c ombining pol l and COS or poll and cyclic.
238 DeviceNe t Connecti ons Ap pend ix B Master CO S Sen d Sw itch COS transmission is possible only f or Use r -set allocations using the Configurator .
239 DeviceN et Connect ions Appendix B The f o llowing diagr a m shows the tr ansmission timing. After the COS send instruction has been sent to the De viceNet (at the I/ O refresh timing for t he CPU.
241 Appendix C FINS Comman ds and Responses f or DeviceNet Unit s Lis t of Co mm a nd C ode s Ref er to SYSM A C CS/ CJ Series Co mm unica t ion C omm ands Reference Man- ual (W342) for detail s on end codes. RESET (0403 ) Resets (rest ar ts ) the De viceNe t Unit.
242 FINS Commands and Responses f or DeviceNet Units Ap pend ix C • Baud rate Command Block Response Block End Codes P aramete r Details [Model, V e rsion] (Response) The De viceNet Unit model and version are returned as outlined below in 20- byte ASCI I code .
243 FINS Commands and R esponses f or DeviceNet Units Appendix C Response Block End Codes P aramete r Details [Operation statu s, Units s tatus 1, Unit status 2, Master funct ion status 1, M as- ter function status 2, Sla ve function status 1, S la v e function s tatus 2] (response) • Operation Status Fix ed at 01 hex.
244 FINS Commands and Responses f or DeviceNet Units Ap pend ix C F or comma nds, t h e data to be sent t o the specified node is spe c ified, wit h a maximum of 538 bytes.
245 FINS Commands and R esponses f or DeviceNet Units Appendix C Retur ns the error history for t he number specified by Read Record No ., in order from the Read Star t Record No . The total number of Error Hist or y Data b ytes i s 10 × Read Record No .
246 FINS Commands and Responses f or DeviceNet Units Ap pend ix C End Codes Important P oint The Error Hi stor y Cl ear command clears the RAM and EEP-ROM err or his- tory ta b le s. End code (hex) Conten ts 0000 Normal end 1001 Command l ength e xce eds maxi mum comma nd length .
247 Appendix D Memory Car d Bac kup Fu nctio ns The DeviceNet U nit stores t he f ollowing setup data i n the internal non-vol atile m emor y ( EEPR OM).
248 Memory Card Bac kup Function s Ap pend ix D Outl in e of Func tions 1. Backin g Up Unit Set up File s Sav es all inte rnal Unit setup data to the Mem or y Card m ounted to the C PU Unit. Method: T ur n ON the Set up File Backup Switch (word n+1, bit 15) to sav e the inter nal Unit setup data t o the Me mor y Car d as a Uni t Se tup File.
249 Memory Card B acku p F unctions Appendix D 3. Savi ng F ile s from C onf igur ator to M emo ry Card Devi ce parameter files (.dvf files) f o r this De viceNet Unit that ha ve been created using the Configu r ator can be sav ed on the M emor y Card via the HM C-AP001 M emor y Ca r d A daptor as file name DNnnB KUP .
251 Appendix E Multi-vendor Applications This appendi x provides precautions an d ref erence mat erial needed when us ing DeviceNet (Compo Bus/D) Units as Devi ceNet com ponents in a m ulti-v e ndor environment.
252 Multi- vendor Application s Appendix E Master Un i t Device Profil e Objec t Mo untin g Ident ity Obje ct (01 H e x) Messa ge Route r Object (02 H e x) General data Compatib le De viceNe t Specif icati ons V olume I - Release 2.0 V olume I I - Rel eas e 2.
253 Multi- vendor A pplication s A ppe nd ix E Devic eNet Object (03 Hex) Co nnectio n O bjec t (05 H e x) Ite m ID content Get (rea d) Set (wri te) V al ue Obje ct cl as s Attri b ute 1 Re vision Y e.
254 Multi- vendor Application s Appendix E Obje ct i nstance 1 Section Inf ormation Max. No. of inst ances Ins ta nce ty pe Ex plic it Me ss age 1 Produc- tion t rig- ger Cy clic T ran sport ty pe Ser.
255 Multi- vendor A pplication s A ppe nd ix E Note 1. Num ber of input byt es used by Slave . 2. Num ber of output bytes u sed by Slav e. Obje ct i nstance 2 Section Inf ormation Max.
256 Multi- vendor Application s Appendix E Note 1. Num ber of input byt es used by Slave . Obje ct i nstance 3 Section Inf ormation Max. No. of inst ances Ins ta nce ty pe Bit Strobed I /O 1 Produc- t.
257 Multi- vendor A pplication s A ppe nd ix E Note 1. Num ber of input byt es used by Slave . Obje ct i nstance 4 Section Inf ormation Max. No. of inst ances Ins ta nce ty pe COS/cy clic I/O 1 Produc.
258 Multi- vendor Application s Appendix E 1. The f o llowi ng table sho ws the instance type by communication s type . 2. The f o llowi ng table sho ws the tr ansp ort class trigg er by connection type. PC Ob ject (2F H ex) Object i nstance 5 and abov e Section Inf ormation Max.
259 Multi- vendor A pplication s A ppe nd ix E Devic eNet serv ice Par amete r option Object insta nce 1 (CIO ar ea) Ser v ice 1CBloc k String Read Logical Area Add ress Lengt h 1DBloc k StringN Read .
260 Multi- vendor Application s Appendix E Note The refresh area ty pes are s hown in the f ollowing table . PC area Refre sh area t ype Refresh ad dress CIO 1 CIO 0000 to CIO 6 143 DM 3 D00000 t o D3.
261 Appendix F DeviceNet Explicit Message Send Command f or Othe r Ma nuf act urer Node s Explicit M essa g e Send (2801) Sends a Dev ic eNet explicit message to a specified object and rec eiv es a response.
262 DeviceNe t Explicit Message Send Com mand for Ot her M anufacturer Nodes Ap pendi x F P aramete r Details [Send Dest ination Node Address] (Command) Specifies the node address of the e xplicit message des tination.
263 Index A ada pt ors remo te , 4 , 10 al loc atio ns See al s o I/ O a ll ocati ons app li cab le U nit s , 6 appl ic atio ns precau tions , xi v C C200H W-DRM21- V1 changi ng la dde r progr ams , 7.
264 Index sp ec ific atio n s , 34 di me ns ion s , 55 DM Area See al s o I/ O a ll ocati ons do t indi cator s See al s o seve n -s egm en t d isp la y E EC Dir e ctiv es , xvi EEPROM data , 26 , 186.
Index 265 displ ay se ctio n , 27 Ma st er Un i t , 200 me a ni ng , 47 mess age c ommunica tions error s , 139 seven- segment displ ay , 48 stat us MS and NS , 47 troub leshoo t i ng , 200 , 222 insp.
266 Index S saf ety p recau tions , xi i sca n lists , 99 er ro rs , 22 4 setu p sa vi ng setu p file s , 19 , 186 , 247 sev en -se gm en t disp l ay me a ni ng , 48 Slav e Units , 7 , 9 , 20 communi .
267 Re vis ion H ist ory A manual re vision code appears as a suffix to the catalog number on the front cov er of the manual. The fol lowing tab le outlines the changes made to the manual dur ing each re vision. P age numbers refer t o the pre vious v ersion.
Ein wichtiger Punkt beim Kauf des Geräts Omron CJ1W-DRM21 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Omron CJ1W-DRM21 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Omron CJ1W-DRM21 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Omron CJ1W-DRM21 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Omron CJ1W-DRM21 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Omron CJ1W-DRM21 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Omron CJ1W-DRM21 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Omron CJ1W-DRM21. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Omron CJ1W-DRM21 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
