Benutzeranleitung / Produktwartung VP--1 des Produzenten Olympus
Zur Seite of 72
POWER A U T O M E N U STATUS P O W E R SOURCE Q U IC K M E N U O N O F F F R E E Z E M U T E P IP D IG ITA L R G B Y P b P r V ID E O S -V ID E O Y C b C r Q U IC K E N T E R ZO O M V O L V K S T N HK.
E-2 IMPOR T ANT SAFETY INFORMA TION Precautions Please read this manual carefully bef ore using your OL YMPUS Data Projector VP-1 and k eep the manual handy f or future ref erence.
E-3 Important Safeguards These safety instructions are to ensure the long lif e of the unit and to prev ent fire and shock. Please read them carefully and pa y attention to all warnings. Installation • For best results , use the unit in a darkened room.
E-4 Fire and Shock Pr ecautions • Ensure that there is sufficient v entilation and that vents are unobstructed to pre vent the buildup of heat inside the unit. Allow at least 10 cm (3 inches) of space between the unit and walls . • Pre vent f oreign objects such as paper clips and bits of paper from falling into the unit.
E-5 Major Features Book-sized, lightweight (at about 1.1 kg/2.4 lbs) and small high-inten- sity mobile pr ojector DMD and the synergistic eff ects of our own optical design serve to improv e the optical utilization efficiency . The three light sources (RGB) required in color e xpression are reproduced with one DMD .
E-6 T able of Contents Preparation and Backgr ound Knowledge IMPORT ANT SAFETY INFORMA TION ............................................................................ E-2 Major Features ...............................................................
E-7 Adjustments and Settings Image .......................................................................................................................... .... E-46 Brightness / Contrast / Color / Tint / Shar pness .................................
E-8 Checking the Supplied Accessories Remov e the main unit and the accessor ies from the box and chec k that the follo wing items are included. ON OFF FREEZE MUTE PIP DIGITAL RGB YPbPr VIDEO S-VIDEO .
E-9 Checking the Supplied Accessories A udio cable (2.5 mm diameter plug / RCA pin plug, 1.5 m / 4.9 feet) [1] This cable is used with equipment that has phono type audio jacks. See Page E-23 about connections. Soft case (for pr ojector/remote control and ac- cessories) [1] This case is used when storing the projector .
E-10 Names of the Main Unit Parts POWER AUTO MENU STATUS POWER SOURCE QUICK MENU AUDIO VIDEO POWER A UTO M EN U STATUS P O W ER SOURCE Q UICK M E N U Exhaust vents Precautions The ventilation slots discharge the heat of the lamp and care must be taken not to come into contact with them.
E-11 Names of the Main Unit Parts AUT O S OURCE QUICK MENU PC AUDIO VIDEO POWER AUTO MENU STATUS POWER S O U R C E QUICK MENU PC AUDIO VIDEO F ront adjusters [ E-27 ] Built-in Security Slot This security slot suppor ts the MicroSaver Security System manuf actured by K ensington Microw are Inc.
E-12 +/– button (Used in all adjustments) Names of the Remote Control Parts ON OFF FREEZE MUTE PIP DIGITAL RGB YPbPr VIDEO S-VIDEO YCbCr QUICK ENTER ZOOM VKSTN HKSTN CANCEL MENU ASPECT AUTO POWER In.
E-13 Preparing the Remote Control Button Battery Replacement Using the remote contr ol for the first time The batter y compartment is fitted with a transpor tation insulation sheet at the time of purchase. Pull out the sheet and remov e it. The remote control is now ready f or use.
E-14 Remote Control Range P oint the infrared transmitter of the remote control toward the remote control sensor located at the front or rear of the main unit and operate. Reception of the remote control signal should generally be possible within the r ange illustrated belo w .
E-15 The Procedure Up to Projecting to the Screen P erform setup adjustments in the following order . 1 P osition the projector See “ Screen Size and Projection Distance ” on P ages E-16 and E-17 . Determine the locations to set up the screen and the projector.
E-16 26" 40" 60" 80" 100" 120" 150" 180" 200" 1.20 (3.94) 1.54 – 1.85 (5.05 – 6.07) 2.33 – 2.80 (7.64 – 9.19) 3.12 – 3.75 (10.24 – 12.30) 3.91 – 4.70 (12.83 – 15.42) 4.70 – 5.64 (15.42 – 18.
E-17 Placement Guide * There is a toler ance of ±5% due to design values. * This tab le uses the lens ape x and lens center as ref erences and requires that the projec- tor be in a horizontal condition (with front and rear adjusters fully withdra wn).
E-18 Connecting Personal Computers and Video Equipment ● Connecting this unit with a personal computer permits presentation data to be projected as a large screen displa y at conferences , lectures, and on other occasions . Connections with PC Connectors Please check the following matters before making connections to the personal computer .
E-19 Connecting Personal Computers and Video Equipment Personal Computers with a mini D-Sub 15-Pin Connector * Mak e the connection to the projector ’ s PC connector and the mini D-sub 15-pin connector through the use of a D VI/mini D-sub 15-pin conv ersion cable.
E-20 Connecting Personal Computers and Video Equipment T o Output the External Output Signal of a Notebook Computer When projection will be with a notebook computer connected, knowledge will be required f or the cable connection and notebook computer star tup procedure as well as the operation that f ollows notebook star tup .
E-21 Connecting Personal Computers and Video Equipment Connections with Video Connectors Video Equipment with VIDEO Connectors * Mak e the connection to the VIDEO connector of the projector using a video cable. Video Equipment with S-VIDEO Connectors * Mak e the connection to the VIDEO connector of the projector using an S-video cable.
E-22 PC VIDEO AUDIO Cr Cb Y Pr Pb Y COMPONENT COMPONENT Connecting Personal Computers and Video Equipment Connections with Component Video Sour ces When the Video Connectors ar e Y , Cb, and Cr Connectors * Mak e the connection to the projector ’ s VIDEO connector using a component cable (which is a vailab le as an option).
E-23 Connecting Personal Computers and Video Equipment Connections with Audio Connectors * Mak e the connection to the projector ’ s AUDIO jac k using an audio cab le.
E-24 Power Cable Connections and Switching the Power On/Off There is an order in which the po wer cable is connected and the power is switched on/off. Operating 1 Connect the A C IN connector of the projector and the power outlet using the sup- plied power cab le .
E-25 Power Cable Connections and Switching the Power On/Off Finishing 1 Switch off the po wer of the connected equipment 2 Switch off the po wer of the projector Main unit operation: Press and hold the PO WER button f or 1 second. Remote contr ol operation: Press the PO WER OFF button.
E-26 Adjustment of the Projection Screen Switch on the power of the connected equipment and make the adjustments with the video signal being input to the projector . Projection Scr een Position Adjustment Adjust the projection image to the scr een. Check that the screen is set le vel and vertically .
E-27 Using the Adjusters Adjustment of the Projection Screen ( 1 ) POWER AUTO MENU STATUS POWER SOURCE QUICK MENU ( 1 ) ( 2 ) POWER AUTO MENU STATUS POWER SOURCE QUICK MENU PC AUDIO VIDEO Raising the .
E-28 General Operation This section describes the use of direct operation with the main unit or remote contr ol buttons. For information about operation using the menu, see “ Menu Operation Method ” on Page E-37 and the various items on P ages E-46 to E-60 .
E-29 Automatic Adjustment of Analog RGB General Operation MENU AUTO SOURCE QUICK MENU ON OFF FREEZE MUTE PIP DIGITAL RGB YPbPr VIDEO S-VIDEO YCbCr QUICK ASPECT AUTO POWER This function automatically adjusts the position shift of the analog RGB input signal, the size of the picture , vertical str iping, and color infidelity .
E-30 DIGITAL RGB YPbPr VIDEO S-VIDEO YCbCr QUICK CANCEL MENU ASPECT AUTO Image of the P ersonal Computer (when selecting digital RGB or analog RGB) Each press of the ASPECT button adv ances the selection one step in the sequence of Auto → Direct → Real, and then repeats.
E-31 Projecting a Pictur e in Pictur e This function displays the video image (i.e ., the picture of the VIDEO connector input) on the personal computer screen (i.e., the PC connector input screen) as a sub-picture. Each press of the PIP b utton advances the screen size of the sub-picture one step in the sequence of On → Off (i.
E-32 General Operation Using the Quick Menu This function permits commonly used adjustments to be performed quickly . Note that the Quick Men u will not be display ed unless the signal of the connected equipment is input. Please select the input that you wish to adjust.
E-33 General Operation Brightness Adjusts the brightness of the image. Brightness decreases in the ( – ) direction and increases in the (+) direction. Contrast Adjusts the contrast of the image. Contrast becomes less distinct in the ( – ) direction and more pronounced in the (+) direction.
E-34 General Operation Correcting Keystone Distortion of the Pr ojection Screen This adjustment is used when the projection screen is dis- torted. Note that extreme distortion cannot be corrected and in such cir- cumstances the projector should be placed to f ace the screen straight on bef orehand.
E-35 General Operation Enlargement of the Image and Video Movement This function digitally enlarges the personal computer image and video image (up to 10 times). (1) Press the ZOOM button. The zoom selection displa y will appear. ENTER ZOOM MENU HKSTN VKSTN VOL CANCEL (4) (3) (1) (2) + – Zoom 0 (2) Enlarge to the desired size .
E-36 General Operation Adjustment of the V olume This function adjusts the v olume of the built-in speaker . (1) Press the VOL button. The volume adjustment displa y will appear. ENTER ZOOM MENU HKSTN VKSTN VOL CANCEL (3) (2) (1) + – Volume 53 (2) Adjust the v olume.
E-37 Menu Operation Method ● This section describes only the menu operation method. Please see this page should you need inf or- mation while performing menu operations . ● For inf or mation about a menu function, adjustment, or setting, please see one of the pages containing such descriptions.
E-38 Menu Operation Method Names and Functions of the Main Unit Buttons Used in Menu Operation MENU AUTO SOURCE QUICK MENU STATUS POWER POWER MENU button Used to display men us, to return to menu name selections, and to close menus (i.e., closing sub men u displa ys).
E-39 Menu Operation Method Performing Menu Operations ● The menu operations of the main unit b uttons differ from those of the remote control buttons.
E-40 Info. Setup View Color Image Aspect Filter Projection Auto 3 Keystone 2 Press the cursor ( ) button to select the menu name Selection of the Menu Name ENTER CANCEL MENU HKSTN VKSTN Red Ea.
E-41 Info. Setup View Color Image Aspect Filter Projection Auto 3 Keystone 4 Press the cursor ( ▲▼ ) button to align the cursor with the item name Selection of the Item Name ENTER CANCEL MENU HKSTN VKSTN Main unit operation: Press the (Q UICK MENU) button.
E-42 6 Press the MENU button and close the menu display Closing the Menu ENTER CANCEL MENU HKSTN VKSTN Main unit operation: Press the MENU button and cancel the cursor displa y . When a sub menu is displa yed, press the MENU button to close the sub menu, then press again to cancel the cursor .
E-43 Selecting Another Menu Name with Remote Contr ol Operation Menu Operation Method When a sub menu is displa yed, press the CAN- CEL button and close the sub menu. Press the CANCEL button again and cancel the cursor display . Info. Setup View Color Image Aspect Filter Projection Auto 3 Keystone Info.
E-44 Analog RGB Digital RGB YPbPr YCbCr Video S-Video .
E-45 Info. Setup View Color Image Language Auto Source On Off On Black Auto Power Off On Screen Menu Position YPbPr Background Disable Analog RGB Digital RGB Video S-Video YPbPr YCbCr .
E-46 Image ● P erform this operation while projecting the picture for which the adjustment/setting will be made . ● Select the menu name “ Image ” . See “ Menu Operation Method ” on P ages E-37 to E-45 f or information about perf or ming menu operations .
E-47 Picture Adj. / Fine Pictur e / H Position / V Position These adjustments are av ailable when analog RGB signals are input. Usually , automatic adjustment is perf ormed at the time of sig- nal selection, but when automatic adjustment is not effec- tive, these adjustments can be performed.
E-48 H Position Adjust this when the picture is shifted to the left or right. Select the “ H P osition ” item name and adjust with the cursor ( ) buttons. Image V Position Adjust this when the picture is shifted up or down. Select the “ V P osition ” item name and adjust with the cursor ( ) buttons.
E-49 Color ● P erform this operation while projecting the picture for which the adjustment/setting will be made . ● Select the menu name “ Color ” . See “ Menu Operation Method ” on P ages E-37 to E-45 for inf ormation about performing menu operations.
E-50 Color System This function sets the color system of the video signal. Normally , this should be set to Auto. Set this function when the system cannot be identified with A uto. Select item name “ Color System ” and select the setting contents with the cursor ( ) buttons .
E-51 View ● P erform this operation while projecting the picture for which the adjustment/setting will be made . ● Select the menu name “ View ” . See “ Menu Operation Method ” on P ages E-37 to E-45 f or information about perf or ming menu operations .
E-52 Filter This function sets the sharpness when the input signal is adjusted to the resolution of the projector and enlar g ed or reduced. Select the item name “ Filter ” and select the setting contents with the cursor ( ) b uttons. Smaller numerical values result in a sharper picture and larger v alues result in a softer picture.
E-53 View Keystone This function corrects the keystone distortion of the pro- jected picture on the screen. Adjust so that the edg es are parallel in the vertical and the horizontal directions.
E-54 Aspect Filter Projection Auto 3 Keystone V Keystone H Keystone Keystone Save Off – + 0 – + 0 Aspect Filter Projection Auto 3 Keystone Picture in Picture Aspect Filter Projection Auto 3 Keystone Picture in Picture Size Position Off Keystone Save This function is used to save the ke ystone adjustment values.
E-55 Setup ● Select menu name “ Setup ” . See “ Menu Operation Method ” on P ages E-37 to E-45 for inf or mation about performing menu operations. The item name displa y will differ depending on the input signal. See “ List of Item Names Offering Input Selection and Adjustments/Settings ” on P ages E-44 and E-45 .
E-56 This function switc hes off the projector power automaticall y when the input of the projector enter s a no-signal condition. Select item name “ A uto P ower Off ” and select the setting con- tents with the cursor ( ) buttons . On ...
E-57 Menu Position This function sets the display position of the menu. Select item name “ Men u P osition ” and select the setting contents with the cursor ( ) buttons . .............. Displays on the left side .............. Displays on the right side YPbPr This setting causes the projector not to accept component YPbPr signals.
E-58 White Balance This function automatically adjusts the blac k level and the white level of the analog RGB input signal so that they suit the personal computer . This serves to improve color repr o- ducibility . 1. Select item name “ White Balance ” and press the cursor ( ) button.
E-59 Info. ● Select menu name “ Info . ” . See “ Menu Operation Method ” on P ages E-37 to E-45 for inf or mation about performing menu operations. The item name displa y will differ depending on the input signal. See “ List of Item Names Offering Input Selection and Adjustments/Settings ” on P ages E-44 and E-45 .
E-60 Info. Resolution / Frequency This function displays the resolution and frequenc y of the detected input signal. This information will not be displa yed unless an analog RGB or digital RGB signal is input and an Analog RGB or Digital RGB input selection is made.
E-61 When the ST A TUS Indicator is Lit/Blinks ST A TUS indicator POW ER AUTO MENU STATUS POWER SOURCE QUICK MENU AUDIO VIDEO PO WER indicator When the ST A TUS indicator of the main unit operation panel is lit or blinks, notification is being given of the irregularities de- scribed.
E-62 ST A TUS Indicator POWER Indicator Action to T ake STATUS Lit red POWER When power is on: Lit green When power is off: Lit amber It is timer to replace the lamp. The lamp timer has e xceeded 1000 hours. Replace the lamp car tridge. The lamp ’ s service life has ended.
E-63 T roubleshooting Check the following matters before r equesting servicing. * Has the po wer plug become disconnected from the outlet? * Is the lamp co ver properly attached? * Has the internal temperature become high? When the internal temperature becomes very high, to protect the unit the power will not s witch on.
E-64 T roubleshooting * Other than f or “ Setup ” and “ Inf o. ” , selection is not per- mitted unless a signal is input to the projector and an image or picture is projected. * There will not be a displa y unless the personal com- puter screen is being projected.
E-65 Cleaning ● Be cer tain to disconnect the power plug from the po wer outlet bef ore cleaning. ● Do not spray or otherwise e xpose the projector , lens, or screen to v olatile substances such as insecti- cides. Do not leav e r ubber or vinyl products in contact with the projector f or long periods.
E-66 The lamp that is used as a light source in the pr ojector has a limited ser vice life. The rated ser vice life of the lamp is about 1000 hours. This could be shor tened depending on conditions of use and other factors.
E-67 Replacing the Lamp Cartridge PREP ARA TION T urn the projector upside down and place it on a soft cloth that has been prepared in adv ance to prev ent scratches. This will assist in lamp car tridge replacement. After replacement, return the projector to the original condition.
E-68 5. Install the new lamp cartridge (1 ) Slowly push in the lamp car tridge with the sock et f acing forw ard. (Align the lamp car tr idge screw with the scre w hole of the projector .) (2) T urn the 2 screws of the lamp car tridge clock- wise to tighten.
E-69 Specifications Optical DMD Single Chip Digital Micro Device (DMD) 1024 768 pixels Lamp 120 W high-pressure mercury lamp Projection lens Manual zoom ( 1.2), Man ual focus F = 2.6 – 2.9, f = 27.5 – 33.0 mm Image size Minimum 26 inch (at projection distance of 1.
E-70 T able of Supported Frequency VESA 640 350 31.5 70.1 – 640 350 37.9 85.1 – 720 350 31.5 70.0 – 640 400 31.5 70.1 – 640 400 37.9 85.1 – 720 400 31.5 70.0 720 400 37.9 85.0 – 640 480 31.
E-71 Cabinet Dimensions STATUS POWER MENU POWER AUTO SOURCE QUICK MENU Unit: mm (inch) 47 (1.9) 180 (7.1) 163 (6.4).
T echnical Assistance : Olympus Digital T echnical Suppor t (800)798-2777 toll-free hotline Mon. – F r i., 8 AM to 10 PM Eastern Time E-mail : distec@olympus.com W ebsite : www .olympusamerica.com For supplies and accessories : Olympus Emporium www .
Ein wichtiger Punkt beim Kauf des Geräts Olympus VP--1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Olympus VP--1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Olympus VP--1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Olympus VP--1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Olympus VP--1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Olympus VP--1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Olympus VP--1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Olympus VP--1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Olympus VP--1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
