Benutzeranleitung / Produktwartung E-100 des Produzenten Olympus
Zur Seite of 52
PLAYBACK E-100 PLAYBACK You can use the camera’s built in monitor screen to play back recorded images. Basic Playback Operation Use the following procedure to scroll through recorded im- ages stored in the camera’s memory. 1. Align the POWER/Function Switch with PLAY.
PLAYBACK E-101 Playing a Movie Use the following procedure to play back a movie recorded in the Movie Mode. 1. Align the POWER/Function Switch with PLAY. 2. Use [ ] and [ ] to scroll through the images on the monitor screen until the movie you want to play is displayed.
PLAYBACK E-102 Playing a Panorama Use the following procedure to play back a panorama re- corded in the Panorama Mode. 1. Align the POWER/Function Switch with PLAY. 2. Use [ ] and [ ] to scroll through the images on the monitor screen until the panorama you want to play is displayed.
PLAYBACK E-103 Enlarging the Playback Image Use the following procedure to enlarge the playback image on the screen. You can select either 2X or 4X enlargement. 1. Align the POWER/Function Switch with PLAY. 2. Use [ ] and [ ] to display the image you want to enlarge.
PLAYBACK E-104 If you want to do this Display on-screen guidance messages Shift the view right Shift the view left Shift the view upwards Shift the view downwards Change the zoom factor: 1X 2X 4X Return the image to normal size Do this Press SET/DISP Press [ ].
PLAYBACK E-105 Selecting a Specific Image in the 9-image View 1. Display the 9-image view. 2. Press SET/DISP. • This causes a pointer to appear in the upper left cor- ner of the monitor screen. 3. Use [ ], [ ], [ ] and [ ] to move the pointer to the image you want to select, and then press SET/DISP.
PLAYBACK E-106 Displaying the Histogram The following procedure displays a histogram of an image's luminance components. The histogram is a tool you can use to check the exposure of an image. 1. Align the POWER/Function Switch with PLAY. 2. Use [ ] and [ ] to display the image whose histogram you want to view.
PLAYBACK E-107 NOTE • If the histogram appears too lopsided in either direc- tion, you should try recording the image again after correcting the exposure (EV) value (page E-66), ad- justing the aperture priority AE aperture value (page E-80), adjusting the manual exposure shutter speed or aperture value setting (page E-81).
PLAYBACK E-108 IMPORTANT! • Auto Power Off (page E-38) is disabled whenever Slide Show is being used. This means you should not leave Slide Show running when using batteries to power the camera. Doing so can rundown batteries. Be sure to stop Slide Show and turn off the camera after you are finished.
PLAYBACK E-109 Cropping an Image Use the following procedure when you want to crop a portion of an enlarged image and use the remaining part of the im- age as an e-mail attachment, Web page image, etc. 1. Align the POWER/Function Switch with PLAY. 2. Use [ ] and [ ] to display the image you want to crop.
DELETING IMAGES E-110 DELETING IMAGES Your camera lets you use any one of the following four meth- ods to delete images from its memory. You can delete the currently displayed image, one or more selected images, all the images in one or more selected folders, or all the images in the camera’s memory.
DELETING IMAGES E-111 NOTE • The camera does not maintain open spaces in its memory. Deleting an image causes images following the deleted image to be shifted up to fill in the empty space created by the deletion.The following shows how remaining images are shifted when image 100-3 is deleted.
DELETING IMAGES E-112 • Any image marked with the icon is marked for de- letion. It will be deleted when you perform the next step of this procedure. • Note that the image that was on the monitor screen when you pressed MENU in step 2 appears first with its icon turned on.
DELETING IMAGES E-113 • Any folder with the icon is marked for deletion. All its images will be deleted when you perform the next step of this procedure. • Note that the folder whose image was on the monitor screen when you pressed MENU in step 2 appears first with its icon turned on.
MANAGING IMAGES E-114 MANAGING IMAGES The image management capabilities of the camera make it easy to keep track of images. You can protect images against deletion, and even use its DPOF feature to specify images for printing.
MANAGING IMAGES E-115 11070026.JPG Month Day Serial number Extension (.JPG/.TIF/.AVI) Files Each folder can contain up to 250 image files. If you try to save the 251st image to a folder, the camera automatically creates a new folder and stores the image there.
MANAGING IMAGES E-116 Selecting a Folder for Playback Use the following procedure to select a particular folder and play back the image files it contains. 1. Align the POWER/Function Switch with PLAY. 2. Press . 3. Use [ 왘 ] and [ 왗 ] to select the folder you want, and then press SET/DISP.
MANAGING IMAGES E-117 5. Press [ 왔 ] or [ 왖 ] to toggle the displayed image ’ s icon on and off. • Any image marked with the icon is marked for pro- tection. It will be protected when you perform the next step of this procedure. Any image without the icon will be unprotected.
MANAGING IMAGES E-118 • Any folder with the icon is marked for protection. All its images will be protected when you perform the next step of this procedure. All images in any folder without the icon will be unprotected. • You can repeat steps 4 and 5 to turn on the icon for multiple folders if you want.
MANAGING IMAGES E-119 DPOF The letters “ DPOF ” stand for “ Digital Print Or- der Format ” , which is a format for recording on a memory card or other medium which digital camera images should be printed and how many copies of the image should be printed.
MANAGING IMAGES E-120 To do this Decrease the number of copies value Increase the number of copies value Toggle printing of the recording date on and off Press this button [ 왔 ] [ 왖 ] PREVIEW • An image selected for printing is marked by the icon.
MANAGING IMAGES E-121 Making DPOF Settings of All Images on the Memory Card 1. Align the POWER/Function Switch with PLAY. 2. Press MENU. 3. Select “ DPOF ” “ All ” , and then press SET/ DISP. 4. Use the button operations described below to make the DPOF settings you want.
OTHER SETTINGS E-122 Changing the Display Language Use the following procedure to switch the display language between English and Deutsch. 1. Align the POWER/Function Switch with REC or PLAY. 2. Press MENU. 3. Select “ Language/Sprache ” using one of the following two key operations, and then press SET/DISP.
CONNECTING TO EXTERNAL EQUIPMENT E-123 CONNECTING TO EXTERNAL EQUIPMENT Your camera has three terminals for connection to external equipment: a VIDEO OUT terminal, a DIGITAL terminal, and a USB port. You can use these terminals to connect the camera to a television, VCR, computer, or other external equipment.
CONNECTING TO EXTERNAL EQUIPMENT E-124 IMPORTANT! • Be sure to turn off both the camera and the other equipment before making any connections. • Check the documentation that comes with your other equipment for information you may need to know when making connections.
CONNECTING TO EXTERNAL EQUIPMENT E-125 1. Use the video cable to connect the camera to the television as shown in the illustration. 2. Perform the required operation on the TV to set it up for video input. • See the documentation that comes with your televi- sion for information about how to do this.
CONNECTING TO EXTERNAL EQUIPMENT E-126 Connecting the Wired Remote Controller to the Camera The optionally available wired remote controller lets you op- erate the camera without touching it.
CONNECTING TO EXTERNAL EQUIPMENT E-127 ■ Connecting to a Computer with the USB Cable • Whenever connecting the USB cable to the camera, make sure the arrow mark on the plug is aligned properly with the arrow mark on the side of the camera ’ s terminal.
CONNECTING TO EXTERNAL EQUIPMENT E-128 ■ Windows The Data Transfer Cable connects to an IBM PC/AT or com- patible equipped with a D-Sub 9-pin RS-232C serial port, as shown below. DIGITAL terminal Serial port (RS-232C D-Sub 9-pin) Data Transfer Cable • Never disconnect the USB cable while a data communica- tion operation is in progress.
CONNECTING TO EXTERNAL EQUIPMENT E-129 IMPORTANT! • Be sure to turn off the camera, computer, and all pe- ripherals connected to the computer (monitor, hard disk, etc.) before connecting the camera to the com- puter. • After connecting the camera to the computer, align the POWER/Function Switch with PLAY.
CONNECTING TO EXTERNAL EQUIPMENT E-130 ■ Another Computer To access the contents on the memory card on a computer that does not have a CompactFlash card slot or PC card slot, use a commercially available PC card reader/writer in combi- nation with a separately available CASIO PC Card Adapter (CA-10).
CONNECTING TO EXTERNAL EQUIPMENT E-131 Memory Card File Structure < ¥ DCIM ¥ > (Parent Folder) INDEX.HTM (Card Browser Main File) QVCAM.QVS (Management File) HTML (Card Browser Folder) INDEX2.HTM () MENU.HTM 100_MMDD (Main Image Folder) 100_MMDD.
CONNECTING TO EXTERNAL EQUIPMENT E-132 • Main Movie File Contents: Movie file recorded by the camera • Preview Folder Contents: Preview images • Preview Image File Contents: Preview images of st.
CONNECTING TO EXTERNAL EQUIPMENT E-133 • We also strongly recommend that after transferring data from a memory card to other external storage that you re- format the memory card and delete its contents before us- ing it to record more images.
CONNECTING TO EXTERNAL EQUIPMENT E-134 Using the HTML Card Browser The camera ’ s Card Browser generates HTML files that let you see a table of image thumbnails for easy selection, and even view the properties of each image. • Card Browser files can be viewed using the Web browsers listed below.
CONNECTING TO EXTERNAL EQUIPMENT E-135 4. Select the Card Browser setting you want. When you want this To turn off the Card Browser (no HTML files generated) Maximum performance, including access to image properties and slideshow capabilities • This format uses high-level Java Script, and requires Microsoft Internet Explorer 4.
CONNECTING TO EXTERNAL EQUIPMENT E-136 Viewing Card Browser File Contents Use your computer ’ s Web Browser to view the contents of the Card Browser files. 1. Transfer the image data from the camera to your computer by cable (page E-126) or by ac- cessing the memory card from your computer (page E-129).
CONNECTING TO EXTERNAL EQUIPMENT E-137 4. You can click the following items on the screen to perform the operations described below. To do this Start an automatic slideshow of full-screen size images .
CONNECTING TO EXTERNAL EQUIPMENT E-138 INDEX DATA • Image Properties The following is the information provided by the Image Properties screen. File Size : File size Resolution : Resolution Quality :.
CONNECTING TO EXTERNAL EQUIPMENT E-139 Saving Card Browser Files • To save Card Browser files, use a USB cable connection (page E-127) or memory card transfer (page E-129) to copy the folder named “ DCIM ” on the memory card to a hard disk, floppy diskette, MO disk, or other external stor- age.
REFERENCE E-41 REFERENCE Camera Menus The following shows lists of menus that appear in the REC mode and PLAY mode, and their settings. • The settings that are underlined in the following table are initial defaults. •“ 쑗 ” indicates items that can be included as part of a short- cut (page E-96).
REFERENCE E-42 PLAY mode SET UP DELETE DPOF PROTECT SLIDE SHOW Off / Type1 / Type2 / Type3 / Type4 Off / On Year / Month / Day Day / Month / Year Month / Day / Year Time setting English / Deutsch No /.
REFERENCE E-43 Mode Settings Settings in Each Mode 쑗 : Available 왕 : Partially available ҂ : Not available Recording Mode Exposure Mode Normal Portrait Landscape Night Scene Best Shot Movie (Norm.
REFERENCE E-44 쑗 : Available ҂ : Not available Recording Mode + Exposure Mode Combinations The following table shows to what extent each recording mode can be used in combination with each exposure mode.
REFERENCE E-144 Troubleshooting 1. Batteries are not oriented correctly. 2. Batteries are dead. 3. Using the wrong AC adaptor. 1. Activation of Auto Power Off (page E-38). 2. Dead batteries 3. You are aligning the POWER/Function Switch with REC while the lens cap is attached.
REFERENCE E-145 Symptom Probable Cause Action Recording Power failure during self- timer operation. Monitor screen image is out of focus. Recorded image is not saved. Colors of recorded image are different from those on the monitor screen. [ 왘 ] and [ 왗 ] operations do not work while the 9-image view is on the monitor screen.
REFERENCE E-146 Symptom Probable Cause Action Playback Monitor screen contents do not appear on the screen of a connected TV. Cannot access the delete screen. Cannot select menu items in the PLAY mode. All buttons and switches are dead. Nothing appears on the monitor screen.
REFERENCE E-147 RECORD ERROR There are no images on this memory card! This camera cannot display the image you selected! REPLACE BATTERY! NO FORMAT MENU Some problem occurred when compressing image data to save it on the memory card. Shoot the image again.
REFERENCE E-148 Insert memory card! MEMORY FULL Change quality/size or delete unneeded images MEMORY FULL Delete unneeded images LENS CAP! There is no memory card loaded in the camera. Load a memory card (page E-39). There is not enough memory to record an image with your current quality and size settings.
REFERENCE E-149 Description ......................... Digital camera Model .................................. QV-3500EX Recorded Image File Format ....
REFERENCE E-150 Battery Life The values noted below indicate the number of hours before battery failure under normal operating temperature (25 ° C). These values are for reference only, and do not guarantee that any particular set of batteries actually will provide the service life indicated.
REFERENCE E-151 • This camera does not have a separate battery to power its clock. Clock settings are cleared whenever power to the camera is cut off (by batteries going dead while the camera is not connected to an AC power outlet with the AC adaptor) for about 24 hours.
Ein wichtiger Punkt beim Kauf des Geräts Olympus E-100 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Olympus E-100 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Olympus E-100 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Olympus E-100 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Olympus E-100 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Olympus E-100 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Olympus E-100 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Olympus E-100. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Olympus E-100 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.