Benutzeranleitung / Produktwartung CAMEDIA P-200 des Produzenten Olympus
Zur Seite of 68
DIGITAL COLOR PRINTER P-200 Installation G u i d e This Installation Guide explains ho w t o install and use th e O lym pu s P-200 Di gi ta l Printer software for W indows 95/98/Me. Keep th is manual booklet in an easily accessible place f o r future reference.
Us er Registration I t is prohibited by copyright laws t o duplicate th is s oft wa re a nd installation guide in whole o r i n part, or t o lease the s oft war e to a third p arty without permission from th e copyright owners.
System Requirements ......................4 Installing the Software......................5 Ea s y installation (plug & play)..................................5 Manual installation ........................7 Uninstallation ..........................
System Requirements The following hardware and software ar e required to install and run this so ft - ware. Computer: I B M PC/AT compatible machine w i t h an i486SX or better CPU running Windows 9 5, 98 or M e (Pentium or better CPU recommended). Memory: 8 MB minimum (3 2 M B or more recommended, depending o n t he application t o be printed).
Installing t h e Software Ins tall t h e Windows 95/98/Me p r i nt e r driver software o n the provided floppy dis k i n yo ur P C . Th i s description uses a PC running Windows 98 as an example. Select [Search fo r th e be st dr iv er f or your device] an d click [Next].
Insert th e floppy disk i nto the PC's flo ppy drive. Select [Floppy disk drive] and click [Next]. Fo l lo w the on-screen instructions. 4 5 7.
Manual installation C li ck the [Start] but to n of Windows, point [Setup] and click [Printer]. Double-click t he [AddPrinter] icon. The [Add Printer W izard] dialog bo x appears. Selec t [Local printer] as the printer connection destination. Olympus does no t guarantee that this printer will operate c orre ctly on a network.
Insert the floppy disk i nt o the PC 's floppy drive an d sele ct [U se disk]. Se t t h e floppy di sk drive as the [Copy source of distributed file.] Th e drive name of t h e floppy disk drive varies d epending on the setup o f each P C. Check your PC' s i nstruction manual if y o u a r e not sure.
Uninstallation When the printer driver software i s n o longer necessary, uninstall it as described below. Click t he [Start] button of W indows, point [Setup] and click [Printer]. The [Printer] window appears. Click t he [OLYMPUS P-200] icon. In t he [File] menu, click [Delete].
Printing Yo u can print images created using commercially available image processing or retouching applications using th is printer driver software. Run th e application and open the images you want to print. Set the image siz e to 12 80 x 960 pixels or less f o r printing, image processing or retouching.
Click [OK] to close the [Printer Setup] dialog box. In t h e [File] menu, click [Print]. Th e [Print] di al og b ox appears. Set t h e number of prints [Copies]. The print copies can be set up to 25. The dialog bo x shown above is an example using th e Olympus CAMEDIA Master 2.
To cancel printing W h e n t h e print m onitor i s displayed: Click [Cancel printing]. When data i s le ft i n the Windows printer spooler: Click the [Start] button. Point [Setup] and click [Printer]. Double-click [ OLYMPUS P- 200 ] t o ope n the [OLYMPUS P-200] w in - dow.
Tips for printing To get the best printing results, b e s ure to read the instruction manual of th e application you are using. Information on ho w to change t he resolution a nd ima ge size i s especially important. I n addition, read th e following tip.
Split Print Y ou can split a sheet o f print paper into multiple planes and print th e sa me image on ea ch of them. In the [File] menu of t h e application, click [Print]. The [Print] dialog box appears. Click [Properties]. [OLYMPUS P-200-LPT1: Properties] appears.
Images ca n b e printed in one o f the fo llowin g split methods. 4-split pr in t 9-split print 16-split print To obtain correct split prints (with an application tha t prints im age s ac- cording to th e resolution of the printer): Se t the resolution t o 320 dpi and image size t o 1 28 0 x 960 pixels.
Adjusting th e Image Quality Yo u ca n adjust the brightness, d epth , contrast an d sharpness of an imag e fo r p rin ting . [Brightness], [Depth] and [C ontrast] each can be adjusted i n 2 1 steps between - 10 a nd +10. [Sharpness] c an be adjusted in 1 1 steps between -5 and +5.
Troubleshooting Guide To solve problems yo u ma y experience with the printer driver, check the trou- bleshooting guide before calling fo r service. If th e problem persists, contact you dealer f or information w hat to d o next. Please als o refer to t he Instruction manual provided with the printer.
Symptom PC operation is unstable. Installation f r o m floppy disk i s impossible. Cause The P C's memory ma y not have enough free memory. There m ay not be enough f r e e space on the hard disk. Treatment If more th an one applications is open, close all unnecessary applications before printing.
OLYMPUS OPTICAL CO., LTD. San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan. (Customer support) Tel . 0426-42-7499 Tokyo http://www.olympus.co.jp OLYMPUS AMERICA INC. Two Corporate Center Dri ve , Melville, NY 11747-3157, U.S.A.
P-200 Digital Color Printer Instructions Thank y ou f o r purchasing this Olympus digital co lo r printer. Before using this product, read this manual carefully t o ensure correct use.
Owner's Record Th e model and serial numbers are located a t the rear. Record the serial number i n t he space provided below. You will need to refer t o these numbers whenever you call you r dealer regard- i ng t his product. Model N o. P-200 Serial No.
Table of Contents Introduction............................................. 4 Precautions .............................................. 4 Safety precautions .................................. 5 C a r e a n d storage...................................
Introduction Thank you f or purchasing this OLYMPUS digital color printer. Read this manual and warranty carefully. Keep them handy f or future reference and when requesting service. Mak e sure th at the d ate o f purchase and dealer's name are included on yo ur warranty.
Safety precautions It i s dangerous to tamper wit h the printer because this could cause fire o r electric shock, possibly resulting in death or serious injury. Before u s e, re ad the safety precautions carefully an d fol low them for proper handling.
WARNING Do n ot damage th e power cord. A damaged power cord ma y result in fire o r electric shock. T o prevent t he cord fr om being damaged, DO NOT: Jerk the c o rd to pul l it out. Bend t h e cord excessively. Hea t t he cord. Place heavy objects on t he cord.
WARNING Do not use the printer in the following places. Unstable or i ncl ined surfaces. Places exposed t o du s t and ot he r particles (such as outdoors, particularly o n a beach). Places subject to rain and water drops, o r enclosed places where c o ndensation could occur such a s inside a plastic bag.
WARNING Observe the following wh en using t he optional B -200NH rechargeable battery. Never disassemble, destroy or short-circuit the battery, or throw it i n a fire. Doing s o m ay cause an explosion. To recharge the battery, mount it on the printer.
NOTE Do not block th e vent. Doing so m a y cause th e printer to he a t u p , p o ssibly resulting in fire or electric shock. Do not blo ck the vent. Do not pu t the printer i n the following places. - Place with po o r ventilation - O n a so f t surface li k e a rug o r be d Do no t p ut the printer on an unstable surface such as a shaky table.
Care an d storage Be wa re of moisture condensation. Moisture condensatio n means t ha t water vapor i n the ai r becomes liquid and sticks to th e pr in te r surface. Th i s phenomenon is caused b y the following. Rapidly heating the room in which the printer is placed C o o l a ir (from an ai r conditioner, etc.
Getting Started Unpacking t h e printer Make su r e that th e fo llo wi ng accessories are supplied with your printer. If you are missing an y of these accessories, contact yo ur dealer immediately.
What you can d o with the P-200 digital color printer Ea sy printing of images recorded in SmartMedi a or CompactFlash Y ou c an print images f r o m SmartMedia or CompactFlash recorded w it h Olympus digital cameras.
13 Identifyin g th e part s POWE R butto n Coolin g fa n windo w PRIN T butto n Contro l pane l Car d cove r Rechargeabl e batter y unloc k leve r D C powe r inpu t connecto r IEEE128 4 26-pi n parall.
Operation Panel PRINT button (+ ) and ( -) buttons SmartMedia/Compact Flash button D AT E button NUMBER button SPLIT button SHARPNESS button PRINT MO DE button POWER button ACCESS/CHARGE indicator ERR.
Setting u p the printer Connecting t he power supply To supply power f rom t he provided A C adapter 1 . Plug th e printer power co rd int o the AC adapter. 2. Plug the AC adapter power co rd in to a wall outlet, th e n plug t h e o t h er e n d o f th e printer power cord into the printer's D C power input connector.
Notes • Recharging time varies depending o n th e remaining battery power and environmental conditions. • E v e n whe n th e battery i s installed, i t is no t recharged while the printer i s se t t o ON . Recha r g i n g only takes place when t h e printer i s OFF.
4. Remaining battery power indication Th e remaining b attery power i s indicated fo r 1 2 seconds a f t e r t h e printer i s turned ON and during printing. The remaining battery power indicator segments light according t o the following. lights (turns off automatically): Th e b atte ry i s fully charged.
Loading t he i nk ribbon cartridge Note • Wh en using the in k ribbon cartridge compartment f o r the first time, remove the head protection sheet fr o m t he inside. Always use the ink ribbon cartridge and print paper supplied together in the same carton.
I f the cartridge compartment l id does n ot close: Remo ve the ink ribbon cartridge, and then re-insert it. Cautions • Th e cartridge compartment may become very hot during o r after operation. Do not insert your finger o r hand inside t h e cartridge compartment.
Storage pr ecaution • D o n ot store an in k ribbon cartridge i n a place subject t o h i g h temperature or humidity, excessive dus t or direct sunlight. Handling th e in k ribb on cartridge To replace an ink ribbon cartridge O p e n the cartridge compartment lid, take out the used in k ribbon cartridge and replace it wi th a new on e.
Loading print paper Cautions • Be careful not to stain or damage the paper feed guide. • Do not touch th e print surface ( the glossy surface w ith nothing printed on it) when handling print paper. • Do not leave print paper in a place subject t o excessive dust.
Note • If y ou need to transport the paper feed cassette with print paper loaded in it , p ut the paper feed cassette in a ba g or other container. Storage precautions • Do no t store print paper i n a place subject t o high temperature or humidity, excessive dust or direct sunlight.
Basic P rinting Printing images recorded on the ca r d (SmartMedia or CompactFlash) T h e following procedure describes how to select a single image f rom the card an d print it o n a single (full- sc.
Note • Wh en you us e a c ard that contains images captured by a different ca me ra , t he frame numbers displayed by y ou r camera may not correspond wit h the ones shown b y the printer. To make s u r e t ha t t h e printer prints the correct image, use the index print function (see p a g e 33).
• SmartMedia cards alw ays have priority, ev en w hen a CompactFlash card has already been inserted first. If you w a n t to u se data from th e CompactFlash card, press the S m artMedia/ Compact Flash button to select i t. • Keep th e c ard cover open while SmartMedia is inserted in th e printer.
• I f CompactFlash cannot be inserted easily, do not force it in , but r em ov e it , check the Com pactFlash insertion ori enta tio n a nd retry insertion from t he beginning. • The image recorded in CompactFlash should b e printed as it was recorded using an Olympus digital camera.
Printing Press th e ( + ) or (-) button t o s e l e c t th e frame nu mb er of th e image to be printed. To change the frame number display to file name display: T h e frame number display on the control panel can b e switched t o fi l e name display.
Note • If y our digital camera does n ot assign file names using 7 digits, use th e frame number display function (with the FRAME indicator lit). The corresponding frame numbers can be checked by performing index printing (see page 3 3 ).
Cautions • Never att empt to insert or remove the SmartMedia or CompactFlash c a rd while the ACCESS/CHARGE indicator on the operation panel is blinking. Otherwise, th e c ar d' s formatting may be destroyed, making it unusable. • Do not insert or remove the SmartMedia or CompactFlash car d during printing.
• Do no t disconnect the AC adapter during printing, even if t he optional rechargeable battery is loaded in the printer. Al so do not connect th e A C adapter during battery-powered printing operation.
Oth er Printing Functions Making split prints Yo u can select t he same image f o r 2-split, 4-split, 9-split o r 16-split planes and print them o n single sheet of print paper. SPLIT button NUMBER button (+) and (-) buttons PRINT button PR I NT I N G indicator PAPER/RIBBON alarm indicator Before you begin printing: Tu rn th e pr int er ON .
Press th e NUMBER button to select t h e number o f print copies display Select t h e desired number of print copies w i th t h e (+) or (- ) button. Any number between 1 and 25 can be selected (see ste p 2 on pa g e 28).
Select t h e l as t frame number (FRAME) b y pressing the NUMBER button, then select th e desired frame number whe re yo u want to start printing with the (+) o r (- ) button. ( 3 0 images including and located before the s e le ct e d frame number or file name will be printed in reverse order.
Printing a ll recorded images in a SmartMedia or CompactFlash c ar d Note • In all-frame printing, all recorded images o n t he card will be printed in reverse order starting from t h e selected frame. Ma ke sur e that t he l as t frame number i s displayed as t he s ta rt in g frame number when printing all im ages.
P re s s the NUMBER button to select th e f r a m e number display function (FRAME). Select t h e first frame number to be printed with the (+ ) o r ( - ) button. All-frame printing starts from t he selected frame number, and images a re printed in reverse order.
Printing DPOF-reserved images Y ou ca n print al l th e images reserved f o r DPO F print ing b y t he digital camera. Images can be printed as one f u l l size image per sheet. However, not e th at certain digital cameras do not have the D P O F facility.
Notes • DPOF allows printing of images designated by Olympus digital cameras provided with th e D P OF reservation facility. • When DP OF reservation is used, only sharpness can b e adjusted w ith this printer. • If tr imm ing is specified in the D P O F reservation, printing may take l onger.
Before you begin: 2 Select t he image f or printing. Wh en the standard indicator o r o ne o f the split print indicators i s selected above, press t he NUMBER button t o select the frame number selection function. Th en s e l e ct t he frame number of the desired image with the (+) or (- ) button.
Adjusting the sharpness Note • With s om e types of images, the contour may be excessively enhanced. Press th e SHARPNESS button to select t he degree of contour correction in prints. SHARPNESS button Every time you press t he SHARPNESS button, the indicator changes in th e order o f NORMAL, SO F T and SHARP.
F or Your Information Troubleshooting Use the f ollow ing measures t o solve problems you may experience wi th yo ur printer, and a l s o read the Installa- tion Guide provided w it h the optional P-200 connec- tion k it. If the problem persists, contact y ou dealer.
For Y o u r Information The control panel displays 0 0 0 w he n the card is inserted. There is no recognizable image data o n the card. Check y o u r c am era's manual t o confirm that it s recording format i s compatible wit h the printer (DCF/ EXIF).
The ERROR, PAPER/RIBBON and PRINTING indicators blink. Paper is jammed. Remove jammed paper. ( Se e below.) T h e ACCESS/CHARGE indicator blinks. Th e SmartMedia o r CompactFlash card is being accessed. Wait a fe w minutes without removing the card. F or Your Information The ERROR indicator blinks.
I f y ou open the cartridge compartment li d by mistake during printing: 1 . Close t h e cartridge compartment l id to e ject print paper automatically. 2 . I f the print paper i s not ejected automatically, remove the paper feed cassette an d remove the print paper projecting fr om the paper feed ca ssette co m partment by hand.
About the i n k ribbon cartridge an d print paper Fo r Yo u r Information Always use the i nk ribbon cartridge a nd print paper specified by Olympus. They are available by ordering the following Olympus model number (a s o f October 2000). Print Pack, Standard S e t : T h e standard s e t contains an i nk ribbon cartridge and sheets of print paper.
Specifications Printer Printing system Sublimation dye transfer printing 4-pass pr int in g (Yellow/Magenta/ Cya n and protective overcoat l ayer) Resolution 320 dpi Effective pixels 1280 ( H ) x 9 6 0 ( V ) d o t s (maximum) Pr i n t paper si z e 4.9 x 3 .
FCC notice This equipment generates a nd uses radio frequency energy a nd if not installed and used properly, t ha t i s , in strict accordance with the manufacturer's instructions, ma y cause interference to radio and television recep- tion.
Accessories Print pa ck (standard set, P-25N) Dedicated rechargeable battery (B-200NH) PC connection kit, parallel (C-P20P) PC connection kit, U SB (C-P20U) Gadget bag fo r P-200 SmartMedia ( 8 MB/16 .
Print index Standard print Split printing (Page 31 ) 2-split print 4-split print 9-split print 16-split print Index p ri nting (Page 33) Date printing (Page 3 7) I B M PC/AT i s a registered trademark of International Bu sin ess Machines Corporation of the U.
OLYMPUS OPTICAL CO ., L T D . San-Ei Building, 22-2, Nishi Sh inju ku 1-chome, Shinjuku-ku, Tokyo, Japan. (Customer support) T el. 0426-42-7499 Tokyo http://www.olympus.co.jp OLYMPUS AMERICA INC. Two Corporate Center Drive, Melville, NY 11747-3157, U.
Ein wichtiger Punkt beim Kauf des Geräts Olympus CAMEDIA P-200 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Olympus CAMEDIA P-200 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Olympus CAMEDIA P-200 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Olympus CAMEDIA P-200 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Olympus CAMEDIA P-200 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Olympus CAMEDIA P-200 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Olympus CAMEDIA P-200 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Olympus CAMEDIA P-200. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Olympus CAMEDIA P-200 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
