Benutzeranleitung / Produktwartung CRW-4816A des Produzenten Asus
Zur Seite of 26
1 48x/16x/48x CD-R W Drive CR W -4816A User ’ s Manual.
2 ASUS CRW -4816A User ’ s Manual Copyr ights/Disclaimer Copyright © 2002 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, ma.
ASUS CRW -4816A User ’ s Manual 3 Contents Copyrights/Disclaimer ....................................................... 2 FCC/CDC Statements ........................................................ 4 ASUS Contact Information .......................
4 ASUS CRW -4816A User ’ s Manual FCC/CDC Stat ements Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: .
ASUS CRW -4816A User ’ s Manual 5 ASUS Contact Information ASUST eK COMPUTER INC. (Asia-Pacific) Address: 150 Li-T e Road, Peitou, T aipei, T aiwan 1 12 General T el: +886-2-2894-3447 General Fax: +886-2-2894-3449 General Email: info@asus.
6 ASUS CRW -4816A User ’ s Manual Safety Information Observe the following precautions before installing and using the ASUS CRW -4816A Drive! Installation Notices Do not attempt to disassemble or repair the drive. Opening the drive may result to exposure to laser radiation.
ASUS CRW -4816A User ’ s Manual 7 Using the Device • Do not move the device from a cold to a warm or hot environment. Drastic change of temperature is harmful to the device. • Before moving or uninstalling the drive, remove a disc from it, if any .
8 ASUS CRW -4816A User ’ s Manual Package Contents Upon opening your ASUS CR W-4816A drive package, check if all the following items are present and in good condition.
ASUS CRW -4816A User ’ s Manual 9 Welcome! Thank you for buying the ASUS CRW -4816A Drive! T o ensure proper installation and use of this device, read the instructions and other important information contained in this manual. Product Intr oduction Specifications The CRW -4816A has the following specifications.
10 ASUS CRW -4816A User ’ s Manual Features The ASUS CRW -4816A is a CD-RW drive with 48X-write, 16X-rewrite, and 48X-read capabilities. The drive complies with the A T Attachment Packet Interface (A T API) specification and comes equipped with the latest innovative technologies in CD recording.
ASUS CRW -4816A User ’ s Manual 11 Data transfer slows down Buffer Memory Write process continues Write Data Data Data transfer slower than write process Bad disc results Data Buffer Memory Empty Da.
12 ASUS CRW -4816A User ’ s Manual DDSS / DDSS II Design Structure Double Dynamic Suspension System (DDSS II) The DDSS II is an enhanced follow up to the DDSS anti-vibration system developed by ASUS. The DDSS CD-ROM technology is designed to reduce the vibration generated from spindle rotation of over 8900 rpm of 40X CD-ROM drives.
ASUS CRW -4816A User ’ s Manual 13 Partial CA V vs. Zone CL V Partial Constant Angular V elocity (P-CA V) Recording T echnology The Partial Constant Angular V elocity (P-CA V) recording method is a combination of the Constant Angular V elocity (CA V) and Constant Linear V elocity (CL V) recording technologies.
14 ASUS CRW -4816A User ’ s Manual Front Panel 1. Headphone jack This jack allows you to connect a headphone with a stereo mini-plug. 2. Headphone volume dial This volume dial allows you to control the volume of the headphone connected to the drive.
ASUS CRW -4816A User ’ s Manual 15 Rear Panel 1. Digital audio connector This connector is for a digital signal output cable. 2. Analog audio connector This connector is for an analog signal output cable. 3. Jumper terminals These pins allow you to select either Master , Slave, or Cable Select mode for the CD-ROM device.
16 ASUS CRW -4816A User ’ s Manual Installation System Requirements Before installing and using the CD-RW drive, make sure that your computer system meets the following requirements. • IBM-compatible Pentium 166MHz or higher PC • Windows 98/98SE/ME/2000/XP/NT • At least 64MB system memory (128MB is recommended) • An empty 5.
ASUS CRW -4816A User ’ s Manual 17 Setting the Jumper T erminals Configure the the jumpers to set the device to master or slave mode before physically installing it to your computer chassis. Use jumper blocks to short the pins to your desired setting.
18 ASUS CRW -4816A User ’ s Manual Installing the CD-R W Drive Follow these steps to install the drive into the computer chassis. NOTE: Refer to your computer manual for specific instructions on opening the chassis and installing drives. 1. Remove the cover of an empty 5.
ASUS CRW -4816A User ’ s Manual 19 3. Secure the drive with screws that came with the drive package. Use two screws on each side of the drive. IMPORT ANT : Depending on the space on your chassis, you may need to connect the drive cables before securing the drive into the chassis.
20 ASUS CRW -4816A User ’ s Manual Connecting the Drive Cables 1. Connect the power cable plug to the power connector on the rear panel. 2. Connect the 40-pin IDE cable plug to the IDE connector , matching the red pin stripe on the cable with Pin 1 on the connector .
ASUS CRW -4816A User ’ s Manual 21 CD-RW Dr iv e Basics Placing a Disc into the Drive 1. Press the eject button on the front of the drive to eject the tray . 2. When the drive tray ejects out of the drive, place the disc on the tray with the label (printed) side up.
22 ASUS CRW -4816A User ’ s Manual 3. Press the drive eject button or lightly push the center of the drive tray to replace the tray inside the drive. Ejecting a Disc from the Drive 1. Press the eject button on the front of the drive to eject the tray .
ASUS CRW -4816A User ’ s Manual 23 Using the Emergency Eject Pinhole The emergency eject pinhole on the front of the drive allows you to manually eject the drive tray and remove a disc from the drive in the following instances: • supply of power to the computer is cut due to electrical power outage • the drive malfunctions 2.
24 ASUS CRW -4816A User ’ s Manual Using Compact Discs T ake note of the instructions in this section when using compact discs. These instructions will help you avoid damaging the discs and your CD-RW drive. Cleaning a Disc Spray the disc with compressed air for about five seconds to get rid of the dust on a disc.
ASUS CRW -4816A User ’ s Manual 25 T echnical Information Environmental Specifications T emperature Operation: 5 ° C < to < 45 ° C Storage: - 20 ° C to < 60 ° C Humidity Operation: 20% to 80% non-condensing Storage: 15% to 85% non-condensing V ibration Operation: 0.
26 ASUS CRW -4816A User ’ s Manual.
Ein wichtiger Punkt beim Kauf des Geräts Asus CRW-4816A (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Asus CRW-4816A noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Asus CRW-4816A - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Asus CRW-4816A reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Asus CRW-4816A erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Asus CRW-4816A besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Asus CRW-4816A verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Asus CRW-4816A. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Asus CRW-4816A gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
