Benutzeranleitung / Produktwartung 510620 des Produzenten Novo Nordisk
Zur Seite of 38
0088 Innovo ® Look at the diagram inside this cover for the names of the different parts of Innovo ® . Y ou can unfold the diagram to help you while you follow the instructions .
0088 Innovo ® Look at the diagram inside this cover for the names of the different parts of Innovo ® . Y ou can unfold the diagram to help you while you follow the instructions .
NovoFine ® 6 mm or 8 mm w Outer needle cap Inner needle cap Protective tab Needle Colour-coded cap Glass ball (for insulin suspensions only ) Rubber membrane Coloured band White bar code band Rubber .
NovoFine ® 6 mm or 8 mm w Outer needle cap Inner needle cap Protective tab Needle Colour-coded cap Glass ball (for insulin suspensions only ) Rubber membrane Coloured band White bar code band Rubber .
Page I n t r oduction Getting started Priming Innovo ® Choosing your dose Making the injection Checking your previous injection Subsequent injections What to do when Penfill ® is nearly empty Changing Penfill ® Function check What do I do if.
Introduction Thank you for choosing Innovo ® , the insulin doser designed to make insulin therapy easier to live with. This manual contains instructions for using, storing, and cleaning your Innovo ® . Here are some of the unique features Innovo ® has to offer: Easy to carry .
INTRODUCTION Easy to change dose. The insulin dose can easily be changed without wasting insulin simply by dialling up or down. Easy to change Penfill ® . Innovo ® is specially designed for the easy changing of Penfill ® 3 ml cartridges and NovoFine ® needles with a length of up to 8 mm.
Getting started Pull off the cap. Put the cap to one side and keep it. Y ou will need to replace the cap after your injection. The very first time the cap is pulled off, the display stays blank until the slide is opened.
Make sure that the push button is pressed completely in. Otherwise the slide will be locked. Open the slide in the direction of the arrow shown below .
In the Penfill ® leaflet you will find instructions on how to: • check that Penfill ® is intact (e.g. no fissures). • resuspend the insulin, if Penfill ® contains an insulin suspension (cloudy insulin). Put Penfill ® into Innovo ® by pushing it slightly backwards as shown.
Make sure that the colour-coded cap fits firmly into place. GETTING ST ARTED 7.
Close the slide completely . The release button is locked until the slide has been closed. Keep the slide closed until Penfill ® is empty . 8 GETTING ST ARTED.
T ake the protective tab of f a NovoFine ® needle and screw the needle tightly onto the colour-coded cap. Pull off the outer and inner needle caps. Do not bend or damage the needle before use.
A Priming Innovo ® æ Always prime your Innovo ® to ensure the insulin flow: • before each injection • after changing Penfill ® • after changing the needle • after opening and closing the slide. It is important that insulin appears at the tip of the needle before you make your injection.
• Dial 1 unit b . When inserting a new Penfill ® , start with 8 units. After opening and closing the slide you will need to dial a larger number of units, depending on the amount of insulin left in Penfill ® . • Hold Innovo ® with the needle upwards and tap the slide gently with your finger a few times c .
Choosing your dose Make sure that a needle is mounted and that the push button is pressed completely in. Press the release button a and the push button will jump out. The display will show 0. Dial the number of units you need by turning the dose selector at a steady speed b .
13 CHOOSING YOUR DOSE Changing a dose If you accidentally dial a larger dose than you need, dial back to the correct number of units. The dose dialled can be changed until you press the push button. Cancelling a dose If you want to cancel a chosen dose, dial back to zero and press the push button completely in.
Making the injection Follow the injection technique demonstrated by your doctor or nurse. T o inject, press the push button completely in until it locks. Y ou will probably feel that it becomes a little harder to press at the end.* This is normal. Do not change the dose after you have pressed the push button.
After you have withdrawn the needle, a few drops of insulin may appear at the needle tip. This is normal and has no effect on the dose delivered. Put the outer needle cap on and unscrew the needle. Discard it carefully . Always replace the cap after using Innovo ® .
16 Checking your previous injection Pull off the cap. After the display test, your previous dose (or priming) and the time passed since delivery can be seen on the display .
CHECKING YOUR PREVIOUS INJECTION For example, if 4 segments are displayed, more than 4 hours have passed since the previous injection. If 1 2 segments are displayed, more than 1 2 hours have passed. In this example the display tells you that a dose of 1 0 units were delivered more than 1 2 hours ago.
18 Subsequent injections Pull off the cap. When the cap is pulled off, all the display symbols are turned on telling you that the display is fully functioning. Y our previous dose (or priming) and the time passed since delivery then appear on the display .
Check that Innovo ® contains the type of insulin you want to inject. If Penfill ® contains a soluble insulin, follow the instructions from page 9 in this manual. If Innovo ® contains an insulin suspension (cloudy insulin), you must resuspend the insulin as described in the Penfill ® leaflet.
What to do when Penfill ® is nearly empty Do not try to inject an insulin suspension (cloudy insulin) if the rubber stopper is below the arrow marks on the slide as shown in the picture. The glass ball must have adequate space to resuspend the insulin.
WHA T TO DO WHEN PENFILL ® IS... Change Penfill ® as described on page 22. Then prime Innovo ® as described on page 1 0 -11. Dial the remaining number of units to complete your dose.
22 Changing Penfill ® • Make sure that the push button is pressed completely in. • Unscrew the needle. • Open the slide. • T ake out the used Penfill ® cartridge.
23 Function check If you think that Innovo ® is not working properly , follow this procedure. • Screw on a new NovoFine ® needle as described on page 9. • Prime Innovo ® as described on page 10 -11. • Put the outer needle cap over the needle.
What do I do if...? Here are the answers to some questions you might ask when using your Innovo ® insulin doser . Display The display does not respond when I turn the dose selector . Press the release button so that the push button jumps out before a dose can be dialled.
Check that the push button is pressed completely in and locked. Open the slide and make sure that Penfill ® is inserted correctly . If Penfill ® is damaged or empty , change it. Check that the slide is closed, and prime Innovo ® until insulin appears at the needle tip.
Insulin is delivered when I turn the dose selector . Y ou have dialled the maximum dose of 70 units and then carried on dialling. If you need to inject a dose of insulin larger than 70 units, you must divide the dose into amounts equal to or less than 70 units.
Changing Penfill ® I cannot open the slide. Put on a new needle. Press the push button completely in until it locks. Remove the needle and open the slide. If the slide still cannot be opened, contact your supplier . Do not try to force the slide open.
How to store and look after your Innovo ® insulin doser Y our Innovo ® insulin doser is designed to work accurately and safely . It should be handled with care. Avoid situations where your Innovo ® insulin doser can be damaged. Always replace the cap after using Innovo ® .
Cleaning • Clean off dirt and dust with a dry , soft brush. • Y ou can clean your Innovo ® by wiping it with cotton wool moistened with ethyl or isopropyl alcohol. • Do not soak Innovo ® in alcohol, wash it or lubricate it. This may damage the mechanism.
30 Display Information Display is off The very first time the cap is pulled off, the display stays blank until the slide is opened. If the display goes off, press the release button, and the push button will jump out. Press the push button completely in, and the display should reappear .
31 During delivery The segments turning on two by two tell you to leave the needle under the skin during injection. After delivery The display shows the number of insulin units delivered. The circle confirms that the delivery has been completed. Previous injection The display shows the number of insulin units delivered.
Important information • Always prime your Innovo ® (as described on page 1 0 -11) to ensure the insulin flow: • before each injection • after changing Penfill ® • after changing the needle • after opening and closing the slide • With a Penfill ® in Innovo ® , never press the push button unless a needle is mounted.
NovoFine ® 6 mm or 8 mm w Outer needle cap Inner needle cap Protective tab Needle Colour-coded cap Glass ball (for insulin suspensions only ) Rubber membrane Coloured band White bar code band Rubber .
0088 Innovo ® Look at the diagram inside this cover for the names of the different parts of Innovo ® . Y ou can unfold the diagram to help you while you follow the instructions .
Ein wichtiger Punkt beim Kauf des Geräts Novo Nordisk 510620 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Novo Nordisk 510620 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Novo Nordisk 510620 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Novo Nordisk 510620 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Novo Nordisk 510620 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Novo Nordisk 510620 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Novo Nordisk 510620 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Novo Nordisk 510620. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Novo Nordisk 510620 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
