Benutzeranleitung / Produktwartung DECT 4025 des Produzenten Nortel
Zur Seite of 74
DECT 4025 Nor tel DECT Handset 4025 User Guide.
.
Revision history 3 Revision histor y Febr uar y 2005 S tanda rd 1.00. This document is issued to sup port Nortel Communication Serve r 1000 Release 4.0.
Revision history 4.
Contents 5 Contents Important safety information . . . . . . . . . . . . . . . . . . . . . . . . . 9 Sensitive electronic equipment . . . . . . . . . . . . . . . . . . . . . . . . . 9 Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 6 Using Quick Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Using Handsfree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Making an SOS call . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 7 Audio settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Adjusting the ringer volume . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Selecting the ringer melody . . . . . . . . . . . . . . . . . . . .
Contents 8.
Important safety information 9 Impor tant safety information Read the following inform ation befo re using the Norte l DECT Handset 4025. The CE symbol on the product certifie s its conformity with th.
Important safety information 10 Safety precautions Observe the following W ARNING Do not open the handse t or charger. Doing so co uld expose you to high voltag es. Have all repairs carried out by authorized service personn el. CA UTION • Do not allow the ha ndset and charger to come into contact with water or chemicals.
About the handset 11 About the handset The DECT Handset 4025 br ings a high level of functionality to in-building mobile workers. Basic features The handset suppor ts the following features: • LED b.
Setting up the handset 12 Setting up the handset Before you use the handset, it is im port ant that yo u read the sa fety information an d perform the following steps: 1. Install the charger. 2. Install the batteries. 3. Charge the batteries. 4. Subsc ribe the handset to the DECT s ystem.
Setting up the handset 13 Your handset is ope rational only after th e batteries have been charg ed. You can then use the handset to make and receive calls.
Setting up the handset 14 Installing the batteries The batt ery compar tment is on th e ba ck of the handset. It takes the three type AAA batteries that are supplied. Pl ease refer to “I mportant battery information” on page 15. Figure 1 illustrates how to insert ba tteries in the DECT Handset 4025.
Setting up the handset 15 Impor tant battery information Heat or cold reduces the perfor mance and service life of th e batteries. It is possible that a h andset with hot o r cold batteries can be temporarily out of operation even if the batteries a re fully charged.
Setting up the handset 16 Char ging guidelines • Charge th e batteries for at lea st six to seven hours before using the handset for the first tim e. This prot ective measur e extends the service life of the batteries. • The maximum po wer output is atta ined only after three to five charging and dischargin g cycles.
Setting up the handset 17 three short “beep” signa ls (only during a call). This ind icates that approximately five minu tes of talk time remains. See Figure 2 for battery charge status definitio ns.
Setting up the handset 18 In order to carry out the following steps, you need to be familiar with the use of the h andset controls; see “Handset co ntrols” on page 20. 1. Press the Menu soft key. 2. Press the arrow keys to scroll and highlig ht the System optio n.
Setting up the handset 19 You can now use the handse t to make and receive calls. 9. Choose one of the f ollowing three options: — press the arrow keys to scroll and highlight the Cancel option. — if you are at a location where there is only one DECT s ystem, press the arrow keys to scroll and hig hlight the Subsc ribe option.
Handset controls 20 Handset contr ols This section will help you becom e familiar with the following: • “Keys and display” on page 22 • “Icon/text line” on page 22 • “Text line” o n .
Handset controls 21 Use the R (Recall) key to: • place an Emergency/SOS call • place a call on hold • retrieve a call on hold • transfer a call • set up a conference call Use the Hook key to.
Handset controls 22 Switching the handset on/off Keys and display The handset has thr ee major display ar eas: Icon/text line The function of this line changes as fo llows: • During a telephone call or while in idle mode, the Icon/text line displays the current status of the handset.
Handset controls 23 T e xt line The middle line of th e display provi des information which varies with the current state of the handset. T able 1: Symbols indicating handset status Symbol Status n Ri.
Handset controls 24 Soft key line Soft keys are located below the ha ndset display screen.The functions allocated to the keys are shown on th e bottom line of the display, as illustrated in Figure 4. The key func tions c hange automatically according to the operation st ate of the handset.
Handset controls 25 Esc sof t key Use the Esc soft key to quit the current menu selection. The selection of the previous men u branch or the curren t idle/connection display is shown. Press the Esc soft k ey for approximately tw o se conds to quit th e present menu and return to the idle disp lay.
Handset controls 26 Handset illumination The display is automatically illuminat ed when there is an incoming call or a key is pressed. The display illuminat ion automatically s witches off after ten seconds if no key is pressed. Key Lock Use the Key Lock feature to disa ble key input and prevent any accidental operation.
Calling features 27 Calling features This section expla ins: • “Making a call” on page 27 • “Answering a call” on page 29 • “Muting th e ringer” on page 29 • “Changing settings d.
Calling features 28 Using Quick Call Use the Quick Call feature to place calls by dialing a one-digit co de. Using Handsfree To enable several people in a room to listen to a call, the ha ndset include s a Handsfree feature. Note: Wh en the Handsfre e function is active, the hook icon is replaced by the loudspeaker icon – = .
Calling features 29 Making an SOS call This handset can be used to make emerge ncy calls to a specific telephone n umber. To store an SOS number, see “Set ting the Emergency Ca ll SOS number” on page 52. Answering a call When the ringer so unds and the call alert w s ymbol flashes, th ere is an incoming call.
Calling features 30 Adjusting the earpiece/speaker volume Muting the handset during a call T ransferring a call Use this option to consult another caller during a connection (enquir y call). During a call, you can change the volume of the earpiece or speaker with the arrow ke ys.
Using Voice Mail 31 Using V oice Mail Use the Voice Mail feature to list en to voice messages left by calling parties. New voice messages ar e indicated by: •T h e V (Voice Mail) symbol flashes on the display scre en (the symbol disappe ars after the vo ice message is played).
Using Voice Mail 32 Accessing V oice Mail Use this option to automatically ac ce ss voice mail messages using a preconfigured Voice Mail access n umber, voice box number, and password . 3. Press the OK soft key. 4. Use the keypad to enter the following: a.
Using Voice Mail 33 3. Choose one of the following: — Press the OK soft key. — Press the Hook key . The Voice Mail access number is auto matically dialed, and your voice box number and password are automatically ente red. Note: Press the Esc key at any time to abort this procedure.
Using the Telephone Boo k 34 Using the T elephone Book Use the Telephone Boo k menu for the following: • “Adding a new en try” on page 36 • “Editing an entry” on pa ge 36 • “Deleting a.
Using the Telephone Book 35 To enter a char acter, press a key from 0 to 9. For example, press the 4 key twice to enter the character H. Press * to toggle between upp er- and lowercase letters. See Table 2 for han dset keypad references. Note: Wh ile entering char acters, the first display line shows all characte rs assigned to the key .
Using the Telephone Boo k 36 Adding a new entr y Editing an entr y 1. Press the Telephone Book soft key. 2. Press the arrow keys to scroll and highlig ht the New Entry option. 3. Press the OK soft key. 4. Use the keypad to enter the phone numbe r. 5. Press the OK soft key.
Using the Telephone Book 37 4. Press the arrow keys to scroll and highlig ht the Edit option. 5. Press the OK soft key. 6. To delete the phone nu mber, either: • Short press the C (Cancel) key to d elete the individual digits from the number. • Long p ress the C key to dele te the entire number .
Using the Telephone Boo k 38 Deleting an entr y Deleting all entries To delete all entries from the Teleph one Book, see “Clearing the Telephone Book” on page 64. 10. Use the keypad to enter the new name. 11. Press th e OK soft key. 1. Press the Telephone Book soft key.
Using the Telephone Book 39 Using Quick Call Use the Quick Call featur e to place ca lls by dialing a one-d igit code. You can store a maxim um of nine Quick Call numbers, on e each for the nine keys on the keypad. Quick Call n umbers are assigned to phon e numbers already stored in the Telephone Book.
Using the Telephone Boo k 40 Deleting a Quick Call assignment 1. Press the Telephone Book soft key. 2. Press the arrow keys to scroll and highlig ht the entry to which you wish to assign a Quick Call number . 3. Press the Options soft ke y. 4. Press the arrow keys to scroll and highlig ht the Quick Call option.
Using the Telephone Book 41 T ransferring phone numbers to the T elephone Book Every num ber in the Re dial List and Caller List can b e transferre d to the Telephone Book. For more information , see: • “Transferring a number to the Telephone Book ” on page 42 to transfer a numb er from the Redial List.
Using the Redial List 42 Using the Redial List The Redi al List stores th e last ten in ternal and ex ternal parties dialed. Use the Redial List to: • dial a number fr om the Redial list • transfe.
Using the Redial List 43 3. Press the Options soft ke y. 4. Press the arrow keys to scroll and h ighlight the Add to option. 5. Press the OK soft key. 6. Press the arrow keys to scroll and h ighlight the Telephone Bo ok option. 7. Press the OK soft key.
Using the Caller List 44 Using the Caller List The Caller List automatica lly stores a maximum of 20 accepted or missed calls. After 20 entr ies are stored in the Caller List, each addition al call overwrites the oldest entry.
Using the Caller List 45 Calling a number fr om the Caller List T ransferring a number to the T elephone Book Use this option to transfer any nu mber from the Caller List to the Telephone Book, wher e the number is treated as a new entry. 1. Press the Info soft key .
Using the Caller List 46 4. Press the Options soft ke y. 5. Press the arrow keys to scroll and h ighlight the Add to option. 6. Press the OK soft key. 7. Press the arrow keys to scroll and h ighlight the Telephone Bo ok option. 8. Press the OK soft key.
Audio settings 47 Audio settings You can c onfigure the audio prefer ences with the following options: • “Adjusting the r inger volume” on page 4 7 • “Selecting the r inger melod y” on page 47 • “Setting ear piece/speaker volume” on p age 49 Adjusting the ringer volume Selecting the ringer me lody 1.
Audio settings 48 2. Press the arrow keys to scroll and h ighlight the Ringer Settin gs option. 3. Press the OK soft key. 4. Press the arrow keys to scroll and h ighlight the Melody option. 5. Press the OK soft key. 6. Press the arrow keys to scroll and h ighlight the Incoming Calls option.
Audio settings 49 Setting earpiece/speaker volume Use the Volume Settings menu option to set the volume for the speaker or the earpiece. 1. Press the Menu soft key. 2. Press the arrow ke ys to scroll and h ighlight one of the following: — Earpiece — Handsfree 3.
Telephone Options 50 T elephone Options Use the Telephone Opt ions menu to perform the following: • “Setting the User Name ” on page 51 • “Selecting the h andset language” o n page 51 • .
Telephone Options 51 Setting the User Name Use the User Name option to stor e a name which appea rs on the idle display. The name can con sist of a maximum 12 characters. For help on using the keypad to enter characters, see “Keypad layout” on pa ge 34.
Telephone Options 52 Setting the Emer gency Call SOS number Use the Emergency Ca ll SOS option to store a number that can be dia led in the event of an emergency. To learn how to dia l the emergency number, see “Making an SOS call” on pag e 29. 3.
Telephone Options 53 Configuring Attention T o nes Use the Attention Tones option to configur e the handset to em it an acoustic wa rning when: • a key is pressed (Key click) • a setting is confir.
Telephone Options 54 Activating/deactivating Char ger Answer Activate Charger Answer if you wish to be able to answer incoming calls by lifting the handse t out of the ch arger.
Telephone Options 55 Activating/deactivat ing Silent Char ging Use the Silent Charging op tion to au tomatically turn o ff the ringer while the handse t is charging. Adjusting Display Contrast Use the Display Contra st option to adjust the display contrast.
Telephone Options 56 4. Press the arrow keys to increa se or decrea se the d isplay contra st. 5. Press the OK soft key. u OK.
System 57 System Before you can make a te lephone call using the DECT handset, the handset must be subscribed to a DECT system . The handset can be operated with a maximum of five DECT systems. Note: When the handset is not yet subscribed to the system, the display shows “ Please, subscribe”.
System 58 Manually selecting the DECT system If the handset has been subscribed to several DECT systems, use this option to select which syst em the handset will use.
System 59 the effective range of the current s ystem. This function is disabled if a specific system is selected using th e option “Manually selecting the DECT system” on page 58. 1. Access the System men u as shown in “Accessing the System menu” on pa ge 57.
System 60 Deleting a system Use this function to remove a DECT system registratio n from your handset. Note: Be careful when deleting DECT systems fr om the handset. The handset must be subscribed to at le ast one DECT system or it will not work. 1. Access the System men u as shown in “Accessing the System menu” on pa ge 57.
System 61 Editing the system name and phone number Use this option to change the system name or phon e number on the handset: 1. Access the System men u as shown in “Accessing the System menu” on pa ge 57. 2. Press the arrow keys to scroll and highlig ht the Subscription optio n.
System 62 10. Use the keypad to enter the new local phone number . 11. Press th e OK soft key. d OK.
Security functions 63 Security functions The security fu nctions are pr otected by a fou r-digit Personal Identification Number (PIN). The PIN is nee ded only when the Read-Only option is switched on.
Security functions 64 Resetting the handset Use Handset Reset to return all settings to the delivery sta te, with the exception of the T elephone Book, the PIN and system re gistrations. Clearing the T elephone Book Use this option to permanently de lete all telephone entries.
Security functions 65 Changing the PIN Use the Change PIN option to reset the pin to a number you will rememb er. The numbers you enter are displayed as ****. For additional security, the new PIN mu st be entered twice. 2. Press the arrow keys to scroll and highlig ht the Clear Phonebook option.
Security functions 66 Activating Read-Only Activating t he Read-Onl y option prev ents other users from ma king changes to the handset settings. All menu fun ctions are activated, but personal settings are protecte d. 5. Press the OK soft key. 6. Use the keypad to en ter the new P IN.
Security functions 67 4. At the Sure? prom pt, choose one of the following: — Press the Yes soft key to activ ate Read- Only. — Press the No soft key to cancel chan ges.
Accessories 68 Accessories Table 4 lists accessor ies that are a vailable for the DECT Handset 4025. T able 4: Accessories Item Order Code 4025 Carr y Case N0010676 Desk Top Charg er A0541122 Charger .
Terms you should know 69 T erms you should know Of f-hook Any line th at is selected to e ither make a call or receive an incoming call. The term off-hook is applied, rega rdless of whether the user a.
Terms you should know 70.
Index 71 Index A Adjusting the ea rpiece/speaker volume 30 Adjusting the rin ger volume 47 Answering a call 29 Arrow soft keys 25 Assigning a quick call number 39 Attention tone s 53 Audio settings 47.
Index 72 M Making an SOS call 29 Muting 29 Muting the hand set during a ca ll 30 Muting the ringer 29 O Off-hook 69 OK soft key 24 Options soft key 24 P Pre-dialing 27 Q Quick call 39 R Read-only 66 R.
.
Nor tel Communication Ser ver 1000 Nor tel DECT Handset 4025 User Guide Copyright © Nortel Networks Limited 2005 All Rights Reserved Information is subject to change without notice. Norte l reserves the right to make change s in design or compo nents as progress in engine ering and manufacturing may warrant.
Ein wichtiger Punkt beim Kauf des Geräts Nortel Nortel DECT 4025 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Nortel Nortel DECT 4025 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Nortel Nortel DECT 4025 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Nortel Nortel DECT 4025 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Nortel Nortel DECT 4025 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Nortel Nortel DECT 4025 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Nortel Nortel DECT 4025 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Nortel Nortel DECT 4025. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Nortel Nortel DECT 4025 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
