Benutzeranleitung / Produktwartung 4000 des Produzenten Nortel Networks
Zur Seite of 86
Part No. 302 283-E Rev 00 August 2 001 600 Tec hnology Pa rk Drive Billeric a, MA 01821-4 130 Installing Har d ware Opt ions f or the C ontivity VPN Switch.
2 302283-E Rev 00 Cop yright © 2001 Nor tel N etwork s All righ ts reserved. Augu st 2001. The info rmation in th is document i s subject to change without noti ce.
3 Inst alling Hard ware Option s for the Contivity V PN Switch USA requirements onl y Federal Comm unications Commission (FCC) Compliance Notice: Radio Frequency Notice Note: This equipment h as been tested a nd found to comply with th e limits for a C lass A digital de vice, pursua nt to Part 15 of the FCC rules.
4 302283-E Rev 00 Japan/Nippon requirements only V oluntary Control Co uncil for In terference (VC CI) statement (Class A) V oluntary Control Co uncil for In terference (VCCI) statement (Class B Cont .
5 Inst alling Hard ware Option s for the Contivity V PN Switch Canadian Department of Communications Radio Interference Regulations This dig ital apparatus (C ontivity 1600 an d Contivity 2600) d oes .
6 302283-E Rev 00 Pour sa pr opre protec tion, l'utilisate ur doit s'a ssurer que tous le s fils de mise à la terre de la source d' é nergie é lectrique, des lignes t é l é phoni ques et des canal isation s d'eau m é tal liques, s'il y en a, sont r accord é s ensemble.
7 Inst alling Hard ware Option s for the Contivity V PN Switch 2. Y our telephone compan y may mak e change s to its fac ilities, equ ipment, opera tions, or procedures t hat could af fect the prop er functionin g of your equipme nt.
8 302283-E Rev 00 remedy Nortel Netwo rks will at its d iscretion p rovide a suitable f ix, patch, or w orkaroun d for the prob lem that may be included in a future So ftware release.
9 Installi ng Hardware Options for th e Contivity VPN Switch Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Related pu b lications . . . . . . . . . . . . . . . . . . . .
10 302283-E Rev 00 Installing Contivity 2500/2000 /4000 LAN/W A N option c ards . . . . . . . . . . . . . . . . . . . . 48 Installing Contivity 2500/2000 /4000 DIMMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 9 Replacin g a Contivity 4000 power supply .
11 Inst alling Hard ware Option s for the Contivity V PN Switch Figur es Figure 1 Removing the Co ntivity 4600 fr ont bezel . . . . . . . . . . . . . . . . . . . . . . . . . 2 0 Figure 2 Contivity 4 600 front components . . . . . . . . . . . . . . . .
12 302283-E Rev 00 Figure 30 Removing the Conti vity 1600 p o wer cord . . . . . . . . . . . . . . . . . . . . . . . . . 6 9 Figure 31 Removing the Conti vity 1600 to p cov er . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Figure 32 Contivity 1600 system board .
13 Inst alling Hard ware Option s for the Contivity V PN Switch Preface This documen t describ es how Nortel Ne tworks* tra ined servic e pers onne l can instal l or replac e hardware components for models 4600, 4 500, 4000, 2600, 2500, 2000, 1 600, and 600 of the Conti vity* produ cts.
14 Preface 302283-E Rev 00 This guide refers to th e Conti vity 4600, 4500, 4000, 2600 , 2000, 1600, and 600 as the sw itch. It assumes t hat you ar e famil iar with W eb bro wsers and thei r general operati on. Related publications The foll o wing list sho ws the ass ociated documentati on that yo u will nee d to conf igure and manage th e switch.
Pref ace 15 Installi ng Hardware Options for th e Contivity VPN Switch braces ({}) Indicate require d elements in synta x descri ptions where there is more than on e option. Y ou must choose only one of the options. Do n ot type t he braces when entering the comman d.
16 Preface 302283-E Rev 00 Acr on ym s This gui de uses the follo wing acron yms: vertical line ( | ) Separates choices f or command k eyw ords and arg uments. Enter only one o f the choices . Do not type the v ertical l ine when ent ering the comman d.
Pref ace 17 Installi ng Hardware Options for th e Contivity VPN Switch Har d-cop y technical manuals Y ou ca n print se lected t echnical manua ls and re lease not es free, d irectly fr om the Intern et. Go to the www .no rteln etwork s.co m/d ocume ntat ion URL.
18 Preface 302283-E Rev 00 An Express Routi ng Code (ERC) is av ailable for ma ny Nortel Netw orks produc ts and serv ices. When you use an ERC, your call is ro uted to a t echnical su pport person who s peciali zes in supp orting t hat product or servi ce.
19 Inst alling Hard ware Option s for the Contivity V PN Switch Chapter 1 Contivity 4600 Option Installation This sec tion desc ribes ho w to install or repla ce hardw are comp onents for t he Conti vity 4600.
20 Chapter 1 Contivity 4600 Op tion Insta llation 302283-E Rev 00 Figure 1 sho ws you ho w to remov e the fr ont bezel fr om the Conti vity 4600. Y ou do n ot need to turn o f f the swit ch to remo ve the f ront beze l when instal ling a po wer supply or hard disk d ri ve.
Chapt er 1 Contivi ty 4600 Opt ion Instal lation 21 Installi ng Hardware Options for th e Contivity VPN Switch Figure 2 sho ws the Cont i vity 4600 f ront compone nts.
22 Chapter 1 Contivity 4600 Op tion Insta llation 302283-E Rev 00 Contivity 4600 system boar d la y out This sec tion shows t he Contivity 4600 syste m board. Figure 3 shows a sample Contiv ity 4600 s ystem board , inclu ding the Dua l Inline Memory Modules (DIMMs) and perip heral compon ent inte rconnect ( PCI) slots.
Chapt er 1 Contivi ty 4600 Opt ion Instal lation 23 Installi ng Hardware Options for th e Contivity VPN Switch Installing Contivity 4600 LAN/W AN and h ar dware accelerator car ds This sec tion desc ribes ho w you install option ca rds in the switch optio n card slide- out tray .
24 Chapter 1 Contivity 4600 Op tion Insta llation 302283-E Rev 00 7 Plug in bo th po wer cords to the p owe r source a nd turn on the switch. Installing Contivity 4600 DIMMs Figure 6 s hows you how to u nlock a DIMM in t he Contivity 46 00, and remove o r instal l a DIMM.
Chapt er 1 Contivi ty 4600 Opt ion Instal lation 25 Installi ng Hardware Options for th e Contivity VPN Switch Figure 5 Inst alling Contiv ity 460 0 DIMMs 7 Pull up the lo ckin g le vers on both si des of the next av ail abl e DIMM , and sn ap the DIMM i nto its s ocket.
26 Chapter 1 Contivity 4600 Op tion Insta llation 302283-E Rev 00 Figure 6 Removing a Co ntivity 4600 p ower supply 3 Grab the handle and pull the po wer supply fi rmly , until th e de vice di sengages . Be caref ul of the sharp shee t-metal e dges. 4 Insert the ne w power supply .
Chapt er 1 Contivi ty 4600 Opt ion Instal lation 27 Installi ng Hardware Options for th e Contivity VPN Switch Replacing a Con tivity 4600 har d disk drive Figure 7 shows you how to replace Co ntivity 4 600 hard disk dr ives for the switc h.
28 Chapter 1 Contivity 4600 Op tion Insta llation 302283-E Rev 00 Figure 7 Removing a Co ntivity 4600 h ard disk d rive 3 Insert the repl acement hard dr i ve f ully , and lock it by tur ning the k ey clockwis e. Make su re the har d disk dri ve LED sho ws the pr oper dri ve number .
Chapt er 1 Contivi ty 4600 Opt ion Instal lation 29 Installi ng Hardware Options for th e Contivity VPN Switch Softwar e Enable t he switch b y followin g these st eps: 1 Use your W eb bro wser to na vigate to the switch, an d go to the Admin ! File Syst em di splay .
30 Chapter 1 Contivity 4600 Op tion Insta llation 302283-E Rev 00.
31 Inst alling Hard ware Option s for the Contivity V PN Switch Chapter 2 Contivity 4500 Option Installation This sec tion desc ribes ho w to install or repla ce hardw are comp onents for t he Conti vity 4500.
32 Chapter 2 Contivity 4500 Op tion Insta llation 302283-E Rev 00 1 Insert a flat-h ead scre wdri ver into the sl ots on the lo wer left an d right si des of the chas sis, and pr y the beze l forw ard. 2 Slide yo ur f ingers be tween the front bezel and the swi tch.
Chapt er 2 Contivi ty 4500 Opt ion Instal lation 33 Installi ng Hardware Options for th e Contivity VPN Switch Remov e the Conti vity 4500 f ront beze l to: • Replace a po wer supply. • Replace a hard disk dri ve. • Insert the reco very di skett e.
34 Chapter 2 Contivity 4500 Op tion Insta llation 302283-E Rev 00 Contivity 4500 system boar d la y out This sec tion desc ribes ins talling opt ion cards onto the system boar d. W arning: Only No rtel Netw orks tr ained ser vice personn el should chan ge existi ng ha rdware configur ation s.
Chapt er 2 Contivi ty 4500 Opt ion Instal lation 35 Installi ng Hardware Options for th e Contivity VPN Switch Figure 10 shows the Con tivity 4500 s ystem board , in parti cular the DI MMs and option c ard slot s.
36 Chapter 2 Contivity 4500 Op tion Insta llation 302283-E Rev 00 Installing Contivity 4500 LAN/W AN and h ar dware accelerator option cards This se ction de scribes ho w you ins tall o ption ca rds into t he Conti vity 45 00 option card sli de-out tr ay .
Chapt er 2 Contivi ty 4500 Opt ion Instal lation 37 Installi ng Hardware Options for th e Contivity VPN Switch Figure 11 sho ws you ho w to install LAN, W AN, o r hardw are acceler ator opti on cards i nto the Cont i vity 4500.
38 Chapter 2 Contivity 4500 Op tion Insta llation 302283-E Rev 00 Installing Contivity 4500 DIMMs Figure 12 shows you how t o unlock a Dual Inline Memory Modul e (DIMM) in the Conti vity 4500, and remove or install a DIMM.
Chapt er 2 Contivi ty 4500 Opt ion Instal lation 39 Installi ng Hardware Options for th e Contivity VPN Switch T o install a DIMM into the Con tivity 4500, follow the se steps: 1 T urn off the swit ch. 2 Remo ve t he po w er c ords. 3 Unscre w the slide -out tray at the back of the uni t and pull it out usin g the thumb scre ws.
40 Chapter 2 Contivity 4500 Op tion Insta llation 302283-E Rev 00 Replacing a Con tivity 4500 po wer supply Figure 13 shows you how t o replace a hot-swappab le power sup ply for t he Contivit y 4500. Figure 13 Removing a Contivity 45 00 power supply T o re mov e the po wer supply: 1 Remov e the front bez el as sho wn in Figure 8 .
Chapt er 2 Contivi ty 4500 Opt ion Instal lation 41 Installi ng Hardware Options for th e Contivity VPN Switch 4 Insert the ne w power supply . Make s ure the po wer supply se ats f irmly in i ts socket and is locked in. Be s ure the green power LED on the front of the po wer suppl y is on.
42 Chapter 2 Contivity 4500 Op tion Insta llation 302283-E Rev 00 Figure 14 Removing a Contivity 45 00 hard d isk dri v e 3 Insert the repl acement hard dr i ve f ully , and lock it by tur ning the k ey clockwis e. Make su re the har d disk dri ve LED sho ws the pr oper dri ve number .
43 Inst alling Hard ware Option s for the Contivity V PN Switch Chapter 3 Contivity 2500/2000/40 00 Option Installation This sec tion desc ribes ho w to install or repla ce hardw are comp onents for t he Conti vity 2500, 2000, an d 4000.
44 Chapter 3 Contivity 2500/200 0/4000 Op tion Insta llation 302283-E Rev 00 Figure 15 Removing th e Contivity 2500/2000/4 000 front bezel The firs t few times you remove t he front bez el it will be ra ther dif ficult to re move. This is because th e ball st ud and socke ts are new .
Chapter 3 Contivity 2500/2000 /4000 Opt ion Installa tion 45 Installi ng Hardware Options for th e Contivity VPN Switch Remo ving the Contivity 2500/2000/4000 top co ver Figure 16 shows you how t o remove the to p cover fr om the Conti vity 2500/2000 / 4000.
46 Chapter 3 Contivity 2500/200 0/4000 Op tion Insta llation 302283-E Rev 00 Contivity 2500/2000/4000 sys tem boar d lay out Figure 17 shows the Con tivity 2500/ 200 system b oard, in part icular the DI MMs, option c ard slots, an d the CPU cool ing fan.
Chapter 3 Contivity 2500/2000 /4000 Opt ion Installa tion 47 Installi ng Hardware Options for th e Contivity VPN Switch Figure 18 Sampl e Contivi ty 4000 s ystem boar d.
48 Chapter 3 Contivity 2500/200 0/4000 Op tion Insta llation 302283-E Rev 00 Installing Contivity 2500/2 000/4000 LAN/W AN op tion car ds Figure 19 shows you how t o install LAN o r W AN option ca rds into a Contivit y 2500/2000 /4000. Y ou can use Slots 1 t o 3 for any mix of LAN and W AN cards.
Chapter 3 Contivity 2500/2000 /4000 Opt ion Installa tion 49 Installi ng Hardware Options for th e Contivity VPN Switch T o in stall an option card: 1 T urn off the swit ch and remove the p o wer c ord. 2 Remov e the front bezel and top cov er as s ho wn in Fig ure 16 .
50 Chapter 3 Contivity 2500/200 0/4000 Op tion Insta llation 302283-E Rev 00 Figure 20 Instal ling Conti vity 2500/2 000/4000 DIM Ms Replacing a Con tivity 4000 po wer supply Figure 21 sho ws you ho w to replace a po wer supply f or a Conti vity 4000.
Chapter 3 Contivity 2500/2000 /4000 Opt ion Installa tion 51 Installi ng Hardware Options for th e Contivity VPN Switch Figure 21 Removing a Contivity 40 00 power supply T o remo ve a Conti vity 4000 po wer supply , remo ve th e switch ’ s front bez el, then follo w these st eps: 1 Press t he b utton do wn to turn of f the po wer supply .
52 Chapter 3 Contivity 2500/200 0/4000 Op tion Insta llation 302283-E Rev 00 Replacing a Con tivity 4000 disk drive T o re place a Conti vity 4000 dis k dri ve, you mus t do the foll o wing: Softwar e.
Chapter 3 Contivity 2500/2000 /4000 Opt ion Installa tion 53 Installi ng Hardware Options for th e Contivity VPN Switch Figure 22 Removing a Contivity 40 00 hard d isk dri v e 2 Pull the handle t o remov e the hard disk dri ve . 3 Insert the repl acement hard dr i ve f ully , and lock it by tur ning the k ey clockwis e.
54 Chapter 3 Contivity 2500/200 0/4000 Op tion Insta llation 302283-E Rev 00 Softwar e Enable t he switch b y followin g these st eps: 1 Use your W eb bro wser to na vigate to the switch, an d go to the Admin ! File Syst em di splay . 2 Click on t he dri ve and click th e Enable b utton.
Chapter 3 Contivity 2500/2000 /4000 Opt ion Installa tion 55 Installi ng Hardware Options for th e Contivity VPN Switch T o re place or c hange a DIMM, fol lo w these st eps. 1 T urn off the swit ch. 2 Remo ve t he po w er c ord. 3 Remov e the front bez el as sho wn in Figure 15 .
56 Chapter 3 Contivity 2500/200 0/4000 Op tion Insta llation 302283-E Rev 00.
57 Inst alling Hard ware Option s for the Contivity V PN Switch Chapter 4 Contivity 2600 Option Installation This sec tion desc ribes ho w to install or repla ce hardw are comp onents for t he Conti vity 2600.
58 Chapter 4 Contivity 2600 Op tion Insta llation 302283-E Rev 00 Remo ving the Contivity 2600 fr ont bezel Y ou must remov e the bezel to insert t he reco very d isket te. Note t hat you do not need to turn o ff the swit ch if yo u are on ly removing the front bez el.
Chapt er 4 Contivi ty 2600 Opt ion Instal lation 59 Installi ng Hardware Options for th e Contivity VPN Switch The f irst f e w times you remo ve the front bez el it will be r ather dif fic ult to remo ve. This is because t he ball studs and socke t clips are ne w .
60 Chapter 4 Contivity 2600 Op tion Insta llation 302283-E Rev 00 Figure 25 Removing th e Contivity 2600 top cover ➨ Slide the to p cover forwar d app roxima tely 1 /4 inc h, then lift th e lid 2 to 3 inches a nd mov e it aw ay from th e chassis .
Chapt er 4 Contivi ty 2600 Opt ion Instal lation 61 Installi ng Hardware Options for th e Contivity VPN Switch Figure 26 The Co ntivity 2600 s ystem boar d W arning: Beware of da nger if batt ery is incor rectly repla ced. Repl ace with the same or an e quivalent battery only , as recommended by the manufa cturer ’ s i nstru ctions .
62 Chapter 4 Contivity 2600 Op tion Insta llation 302283-E Rev 00 Installing LAN/W AN and har dware accelerator option car ds Figure 27 sho ws you ho w to install LAN, W AN, o r hardw are acceler ator opti on cards i nto the swi tch. Y ou ca n use Slots 1 to 4 for an y mix of LAN and W AN car ds.
Chapt er 4 Contivi ty 2600 Opt ion Instal lation 63 Installi ng Hardware Options for th e Contivity VPN Switch 3 Remov e the front bez el as sho wn in Figure 24 . 4 Re m ove t h e t op cove r as sh own i n Figure 25 . 5 Remov e the f iller panel scre w and pull ou t the f iller panel a s sho wn in Figure 27 .
64 Chapter 4 Contivity 2600 Op tion Insta llation 302283-E Rev 00 Installing Contivity 2600 DIMMs Figure 28 sho ws you ho w to unlock a Dual Inline Memory Modul e (DIMM) and remo ve or install the DI MM in the ne xt av ailable slot ( for exampl e, if the DIMM #1 slot is populat ed, add the next DIMM to the DIMM #2 slot ).
Chapt er 4 Contivi ty 2600 Opt ion Instal lation 65 Installi ng Hardware Options for th e Contivity VPN Switch T o re place or c hange a DIMM, fol lo w these st eps. 1 T urn off the swit ch. 2 Remo ve t he po w er c ord. 3 Remov e the front bez el as sho wn in Figure 24 .
66 Chapter 4 Contivity 2600 Op tion Insta llation 302283-E Rev 00.
67 Inst alling Hard ware Option s for the Contivity V PN Switch Chapter 5 Contivity 1600 Option Installation This cha pter des cribes h ow Nortel Network s trained s ervice p ersonnel can ch ange exi sting har dware c onfig urations , includin g instal ling LAN and W AN cards and ho w to add memor y for the Conti vity 1600.
68 Chapter 5 Contivity 1600 Op tion Insta llation 302283-E Rev 00 Remo ving the Contivity 1600 fr ont bezel Y ou must remov e the bezel to insert t he reco very d isket te. Note t hat you do not need to turn off the Con ti vit y switch if yo u are o nly rem oving the front bezel .
Chapt er 5 Contivi ty 1600 Opt ion Instal lation 69 Installi ng Hardware Options for th e Contivity VPN Switch Remo ving the Contivity 1600 top co ver T o in stall LAN or W AN cards, or to instal l additi onal memory , you must remov e the Conti vity 16 00 ’ s front bezel and the n the sw itch ’ s t op c over.
70 Chapter 5 Contivity 1600 Op tion Insta llation 302283-E Rev 00 4 Use t he Ph illips screwdriv er to remove the f our sc re ws t hat se cure th e cover to the c hassis, a s sho wn in Figu re 31 .
Chapt er 5 Contivi ty 1600 Opt ion Instal lation 71 Installi ng Hardware Options for th e Contivity VPN Switch Contivity 1600 system boar d la y out Figure 32 shows the Con tivity 1600 ’ s system board , in parti cular the DI MMs, option c ard slot s, and the CPU cool ing fan.
72 Chapter 5 Contivity 1600 Op tion Insta llation 302283-E Rev 00 Installing Contivity 1600 option cards This se ction sho ws you ho w to instal l LAN or W AN option c ards in the Conti vity 1600. 1 T urn off the swit ch. 2 Remov e the po w er c ord, as sho wn in Figure 3 3 .
Chapt er 5 Contivi ty 1600 Opt ion Instal lation 73 Installi ng Hardware Options for th e Contivity VPN Switch 4 Remov e the top co ver , as sho wn in Figure 31 . 5 Remov e the f iller panel scre w and pull ou t the f iller panel, as sho wn in Figure 34 .
74 Chapter 5 Contivity 1600 Op tion Insta llation 302283-E Rev 00 Figure 35 Instal ling Conti vity 1600 o ption cards 7 Replace t he card a nd scre w . 8 Repl ace th e top c ov er . 9 Replace t he front bezel. 10 Reconnect the po wer cord. 11 T urn on th e switc h.
Chapt er 5 Contivi ty 1600 Opt ion Instal lation 75 Installi ng Hardware Options for th e Contivity VPN Switch Installing Contivity 1600 DIMMs Figure 36 sho ws you ho w to unlock a DIMM and r emov e or insta ll the DIMM in the ne xt av ailable sl ot (for e xample, if the DIMM # 1 slot is populated, than add the next DIMM to the DIMM # 2 slot ).
76 Chapter 5 Contivity 1600 Op tion Insta llation 302283-E Rev 00 T o re place a DIMM , follo w these ste ps. 1 T urn off the swit ch. 2 Remov e the po w er c ord as sho wn in Figure 30 . 3 Remov e the front bez el as sho wn in Figure 29 . 4 Re m ove t h e t op cove r as sh own i n Figure 31 .
77 Inst alling Hard ware Option s for the Contivity V PN Switch Chapter 6 Contivity 600 Option Installation This cha pter des cribes h ow Nortel Network s trained s ervice p ersonnel can ch ange exi sting har dware c onfig urations , includin g instal ling LAN and W AN cards for the Conti vity 60 0.
78 Chapter 6 Contivity 600 Opt ion Installa tion 302283-E Rev 00 9 Reconnect the po wer cord to tur n the switc h back on. Opening t he Contivity 6 00 T o acc ess the sy stem, you must remov e remov e all cabl es, the po wer cord, an d the bottom met al scre ws and pull the chassis from the re ar .
Chapter 6 Contivity 600 Opt ion Installa tion 79 Installi ng Hardware Options for th e Contivity VPN Switch Figure 37 Removing the bo ttom screws 4 Firm ly pu ll the c hassi s towards you to loo sen it from the ca sing. Y o u can gently s hake i t so that it slips ou twards and into yo ur hand or y ou can pull gently o n the I/O e xpansion bay .
80 Chapter 6 Contivity 600 Opt ion Installa tion 302283-E Rev 00 Figure 38 Removing th e system from the chassis l Contivity 600 system boar d la y out Figure 39 shows the Contivit y 600 syst em board, i n partic ular the option c ard slot, DIMM memory , and the CPU co oling fan.
Chapter 6 Contivity 600 Opt ion Installa tion 81 Installi ng Hardware Options for th e Contivity VPN Switch Figure 39 Contiv ity 600 syste m board Installing Contivity 600 option car ds This se ction sho ws you ho w to instal l LAN or W AN option c ards in the Conti vity 600.
82 Chapter 6 Contivity 600 Opt ion Installa tion 302283-E Rev 00 1 Rem ov e the blank PCI bra cket by inser ting a Phill ips sc re w dr iv er int o the slot a t the ri ght of the bl ank P CI bra cket an d rotati ng th e screw counter -clockwis e. 2 Lift out the blan k PCI brack et, and s lide the re placemen t card into the intende d slot.
Chapter 6 Contivity 600 Opt ion Installa tion 83 Installi ng Hardware Options for th e Contivity VPN Switch Memory option The Conti vity 600 shi ps with 64 Mbits of memory ins talled.
84 Chapter 6 Contivity 600 Opt ion Installa tion 302283-E Rev 00.
Inst alling Hard ware Option s for the Contivity V PN Switch 85 Inde x A acron yms 16 additional memory installing 45 antistatic 19, 34 C con ventions 14 con ventions, tex t 14 custom er support 17 D .
86 Index 302283-E Rev 00 text con v entions 1 4 to p c over remo ving 45 W W AN cards install ing 37, 45, 48 , 62, 72, 81.
Ein wichtiger Punkt beim Kauf des Geräts Nortel Networks 4000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Nortel Networks 4000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Nortel Networks 4000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Nortel Networks 4000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Nortel Networks 4000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Nortel Networks 4000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Nortel Networks 4000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Nortel Networks 4000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Nortel Networks 4000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
