Benutzeranleitung / Produktwartung mec-2-fl-d60-n105 des Produzenten Nikon
Zur Seite of 24
Use of Iris Camera MEC-2-FL-D60-N105 1 Use of Nikon D60 Miles Eye Camera (MEC-2-FL-D60-N105) Contents of the MC-2-F L Iris Camera System ......................................................2 Preparing the Iris Camera for Use – (Flex- Lighting) ...
Use of Iris Camera MEC-2-FL-D60-N105 2 Use of MEC-2-FL-D60 Iris Camera Contents of the Camera Carr y Case – MC-2- FL-D60-N105 Case Contents for MC-2-FL 1. Camera with Macro Lens 2. Hood-Mounted Illuminator 3. Camera Batteries 4. Camera Battery Charger Cord Compartment 5.
Use of Iris Camera MEC-2-FL-D60-N105 3 Macro Camera MEC-2-FL Kit Preparing the Iris Camera for Use – Flex-Lighting 1. Open Camera Carry Case by lifting up each latch.
Use of Iris Camera MEC-2-FL-D60-N105 4 4. Remove lens cap and turn the camera on. Mode dial is set to A =Aperture p riority 5. Pop up the built-in flash by pr essing button on left side 6.
Use of Iris Camera MEC-2-FL-D60-N105 5 7. Rotate Illuminator until it snaps into place a t 12:00 position: 8. Press focus light power switch: 9. Your camera is now ready to take iris pictures. When complete with the photography, reverse these steps to put the camera away.
Use of Iris Camera MEC-2-FL-D60-N105 6 11. For “flat” or uniform illumination, use the Both Channels Open position. This is setting is when the lever is all the way to the left or the right: Close-up detail of the lightguide channel shutter padd le switch: 12.
Use of Iris Camera MEC-2-FL-D60-N105 7 13. Note: for general photography, use the enclosed Zo om lens (18-55mm VR) instead (VR=Vibration Reduction). You may also use any Nikon AF-S or AF-I autofocus lens.
Use of Iris Camera MEC-2-FL-D60-N105 8 How To Take Perfect Iris Pictures 1. Be sure the client is comfortably seated and relaxed. 2. If a chinrest is not used, have the client open their own lids by p.
Use of Iris Camera MEC-2-FL-D60-N105 9 5. If a chinrest is used, adjust the height so th e center of the iris is about 1” (25mm) below the bottom of the forehead rest. When a chinrest is u sed, lid retractio n can be accomplished using two 6” cotton swabs in one hand to separa te lids.
Use of Iris Camera MEC-2-FL-D60-N105 10 10. Always take all the right eye pics first then all the left eye pics. If you take scleral pics, start with the iris of that eye, followed by the four quadrants of the sclera (normally Left, Right, Upper, Lower).
Use of Iris Camera MEC-2-FL-D60-N105 11 Sample iris images: Lef t, Blue iris at f/51; Right, Mi xed iris at f/45.
Use of Iris Camera MEC-2-FL-D60-N105 12 How To Transfer Iris Images Using The Card Reader 1. Start with the reader unplugged 2. Insert the SD Flash memory card into the card reader 3. Plug the card reader into the computer’s USB socket The blue light on the card reader will illum inate: 4.
Use of Iris Camera MEC-2-FL-D60-N105 13 Card Reader Disconnection In Deta il – Model S6 1-slot card reader 1. Close out all folders that refere nce the Flash Drive letter. When closing a folder in W indows, pressing the shift key at the same tim e will also close all parent windows.
Use of Iris Camera MEC-2-FL-D60-N105 14 7. After Clicking the Card Reader Device, The blue light on the Card Reader will go out, indicating that the power is no longer being supplied to the card reader and it is now safe to remove the card reader from the USB socket.
Use of Iris Camera MEC-2-FL-D60-N105 15 3. At this point I am currently recommending that you select the "Microsoft S canner and Camera Wizard" since it has the best behavior and options. I do not bother with Nikon Pict ure Project but it does work well with the Nikon Capture program.
Use of Iris Camera MEC-2-FL-D60-N105 16 11. Then open the image in a photo editor (such as Pain t Shop Pro or Photo Shop) and crop it down to the smallest rectangle that encloses the iris. This is saved with the same f ilenam e but a "c" at the end, prior to ".
Use of Iris Camera MEC-2-FL-D60-N105 17 How to use the enclosed universal 12-sector iris grids with chart If you do not use printouts, just place th e grids over the imag es on the m onitor.
Use of Iris Camera MEC-2-FL-D60-N105 18 Camera Maintenanc e – Focus Light Battery Change Focus Light Type 3 – FLV8F (LED focus light with flex end) 1. Remove the focus light from the illum inator. 2. Open the battery compartment by unscrewing the end cap.
Use of Iris Camera MEC-2-FL-D60-N105 19 5. Put in the new batteries with the button end (positive) first. The easy way to load the 4 button cells is to st ack them up (button end up) on a sheet of paper or card, slide the focus light over them, then tilt the light with paper upright.
Use of Iris Camera MEC-2-FL-D60-N105 20 Camera Settings Note: These steps are already done in manufacturing , but you may need to reset these setting if the camera is used in an automatic mode for other photography. A. Lens Settings – Nikkor 105mm VR Lens -- These steps are already done in manufacturing.
Use of Iris Camera MEC-2-FL-D60-N105 21 Reference for Nikon D-60 Settings Note: These steps are already done in manufacturing , but you may need to reset these setting if the camera is used in an au tomatic mode for other photography. Iris Camera Menu Settings: Shooting Menu White Balance change from A to Flash CSM Menu 14.
Use of Iris Camera MEC-2-FL-D60-N105 22 Menu Reference The Nikon D-60 has four menus (plus a retouch menu that is not norm ally used), each one signified by a different icon in the leftmost column. To access the menus, switch th e camera on and press the MENU button on the back of the camera.
Use of Iris Camera MEC-2-FL-D60-N105 23 8. Flash Compensation 0.0 0.0 0.0 9. AF-assist ON ON ON 10. ISO auto OFF OFF OFF 11. Fn Button ISO ISO ISO 12. AE-L/AF-L 2 locks 2 locks 2 locks 13. AE Lock OFF OFF OFF 14. Built-in Flash TTL-Fl ash Manual-Full Power TTL- Flash 15.
Use of Iris Camera MEC-2-FL-D60-N105 24 Aperture Guide Camera: D60 Illuminator: Flex-Lighting ISO: 200 EV: 1/3 Brown: 16---18---20---22---25 Tan: 20---22---25---29---32 Mixed: 22---25---29---32---36 Blue: 25---29---32---36---40---45 Sclera: 51---57 Do not use: 4.
Ein wichtiger Punkt beim Kauf des Geräts Nikon mec-2-fl-d60-n105 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Nikon mec-2-fl-d60-n105 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Nikon mec-2-fl-d60-n105 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Nikon mec-2-fl-d60-n105 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Nikon mec-2-fl-d60-n105 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Nikon mec-2-fl-d60-n105 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Nikon mec-2-fl-d60-n105 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Nikon mec-2-fl-d60-n105. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Nikon mec-2-fl-d60-n105 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
