Benutzeranleitung / Produktwartung LRB 3000PRO des Produzenten Newcon Optik
Zur Seite of 28
Operation Manual LRB 3000PRO LASER RANGE FINDER BINOCULARS 105 Sparks Ave., Toronto, ON M2H 2S5, Canada.
ii.
iii IMPORTANT INFORMATION Read prior to activation You have ju st purchased a sophisticated el ectro-opti cal device that emits i nvisible laser radiation.
iv • Never aim the unit at highly re flective objects like mirrors and retroreflective surfaces, wh ich are in close proxim ity to the laser rangefinder.
1 TABLE OF CONTENTS 1. BRIEF DESCRIPTIO N.......................................2 Principle of operation ..................................................2 Key Feat ures ...............................................................3 2. DEVICE APPE ARANCE .
2 CAREFULLY READ ALL THE I NSTRUCTION S BEFORE USING! FAILURE TO OBEY THE INSTRUCTIONS WILL VOID THE WARRANT Y ! 1. BRIEF DESCRIPTION The LRB 3000PRO Laser Rangefinder Binoculars (System) is an advanced laser range finder that enab les instant distance, speed, and angula r measurements.
3 Key Features Modern digital circuitry allows targeting through most types of glass Speed detector Selection of the first, last or the most reflective target Distance is displayed in .
4 2. DEVICE APPEARANCE Fig. 1. Front view 1 – Eyepieces 2 – Objective lens 3 – Mode butto n 4 – Action butt on 5 – Battery com partment cover 6 – Rubber grip 5 4 1 3 2 6.
5 Fig. 2. Rear view 1 – Eyepieces; 7 – Inter pupillary distance ad justment lever; 8 – Identification and certification label (located at the bottom): 1 7 8.
6 Fig. 3 Display 1 – Low battery indi cator 2 – Reticle (either -¦- or ) 3 – Units of measurem ent 4 – Measurement resul t 5 – Laser activ e indicator 6 – Re ady mode indi cator 7 –.
7 3. DELIVERY SET Standard delivery set LRB is supplied in the following assembly: Qty LRB 3000PRO 1 Carrying case 1 Neck strap 1 Operation m anual 1 9V non-m agnetic Lit hium battery 1 Warranty card 1 Optional accessories Hard case 4.
8 Range Finder Laser Measuring range Accuracy First, last and auto target selection Meters/Yards display Last 10 readings recall Reticle Class 1, eye safe, 905 nm 10 – 3,000 m ± 1 m Yes Yes Yes -¦.
9 Environmental Operational temperature range Storage temperature range -25 / +50 o C (-13 / +122 o F) -45 / +65 o C (-49 / +149 o F) Mechanics Tripod thread Weight without battery Dimensions ¼” x 20 TPI 970 g 158x145x70 mm 5. OPERATION INSTRUCTIONS Preparing device for operation.
10 • A 9V Lithium non-magnetic battery guarantees over 5,000 shot s at room temperature. It is recomm ended for the field usage. In ad dition, this battery does no t influence the internal com pass. Note: Metal housing of t he battery may degrade the compass accuracy.
11 Factors affecti ng measuring distance Though ma ximum measurem ent distance depends on t arget reflectivity, we ather condi tions and other condit ions, for m ost targets the unit will provide accurate rang ing for up to 2,500 meters. Under good conditions a large size targ et can be measured up to 3,000 meters.
12 smaller, the farther, and the le ss reflective is the target – the higher is the possibility of obtainin g an incorrect measurement. To improve accuracy the unit has a built-in target selection logic that allows choosing which target to range : the nearest (‘first’), the far thest (‘last’), or the m ost reflective (‘aut o’).
13 parameters are measured in t he Scanni ng regim e though both will be quickly disp layed, the second one may be difficult to register by eye. Nevertheless a ll data is recorded and may be recalled (see Data Recall mode for d etails.) Operation and service modes Pressing Mode button (3, Fig.
14 o Compass from Mils to Degrees o Speed from KMH to M PH** rEc – allows data recall of the last 10 m easurement results, o CLr – Clears all Measurem ent SEt – allows the user to select.
15 Accuracy correction If the System produces som e measurement errors that lie beyond unit specification , it may be an indication that unit requires calibration similar to one condu cted at production level. To do accuracy correction, please sele ct Corr from CAL men u.
16 2 – Target should not have high-reflective surface (white color is not considered high reflective in this case. 3 – Unit shall be well leveled with deviation from 0 not more than ±0.75 degrees. Horizontal d irection shall be to Magnetic North (not True North).
17 Data Recall mode In Data Recall mode results of the last 10 measurements can be displayed. Measurement results are save d in on-board memory in sets depending on the paramet ers set for measuri ng,.
18 6. BEST MEASURING TECHNIQUE Laser range finder measures di stance by catching laser beam reflected from the target. Ever ything that i mproves reflect ion increases the measurement reliability and maximum range. 1. Use tripod when ranging remote targets.
19 7. STORAGE AN D MAINTENANCE The unit is a sophisticated precision optical instru ment equipped wi th laser and electr onics. There fore, it should be handled with due care. • Keep it away from direct sunl ight. • Avoid impacts, jolts, dust, moisture, and sharp changes of temperature.
20 8. TROUBLESHOOTING Ranging does not work. The display is transparent. Check the charge of the battery. Replace it if it is weak. Ranging does not work. The display ind icates results of the last measurement. Wait until display becomes transparen t, and press the Action button agai n.
21 9. WARRANTY NEWCON warrants this product against defects in material and workmanship for one year from the date of th e original purchase. Lon ger warranty is ava ilable, subject to the terms of the specific sales contract.
22 10. CUSTOMER SUPPORT Should you experience an y difficulties with your NEWCON OPTIK product, consult the enclo sed manual. If the problem remains unresol ved, contact o ur customer su pport departm ent at (416) 663-6963 or toll free at 1-877-368-6 666.
23 11. QUALITY CERTIFICATE Serial number _________ __________________ __ The unit has passed the quality inspection. Production date Quality Inspector Purchase date.
NEWCON OPTIK ™ 2011 R1.I – 2.11.
Ein wichtiger Punkt beim Kauf des Geräts Newcon Optik LRB 3000PRO (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Newcon Optik LRB 3000PRO noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Newcon Optik LRB 3000PRO - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Newcon Optik LRB 3000PRO reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Newcon Optik LRB 3000PRO erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Newcon Optik LRB 3000PRO besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Newcon Optik LRB 3000PRO verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Newcon Optik LRB 3000PRO. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Newcon Optik LRB 3000PRO gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
