Benutzeranleitung / Produktwartung GS724TPS-100NAS des Produzenten NETGEAR
Zur Seite of 36
202-10335-01 November 2007 NETGEAR , Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA GS700TP (724TP , 748TP) Series Hardware Inst allation Guide.
ii v1.0, November 2007 © 2007 by NETGEAR, Inc. All rights reserved. FullManual. T echnical Support Please refer to the support informat ion card that shipped with your prod uct.
v1.0, November 2007 iii V oluntary Control Co uncil for Interference (VCCI) S t atement This equipment is in the Class B cate gory (information equipment to be used in a residential area or an adjacen.
v1.0, November 2007 iv interference will not occur in a pa rtic ula r installation. If this equipment does cause harm ful interference to radio or television reception, which ca n be determined by tur.
v v1.0, November 2007 Content s About This Guide Conventions, Formats and Scope ............ ................ ................. ............. ................ .......... ix How to Use This Manual ................. ................ ............. ......
vi Contents v1.0, Novemb er 2007 System LEDs ..................... ... .... ... ... ............. ... ... .... ... ... ... ............. .... ... ... ... ... .......... 3-22 Device Hardware Interfaces ..................... .... ......... .............
ix v1.0, November 2007 About This Guide Congratulations on the purchase of the NETGEAR Smart Switch. The NETGEAR ® GS700TP Installation Manual describes how to install, configure an d troubleshoot the smart switch. The information in this manual is intended for readers with intermediate computer and Internet skills.
GS700TP Hardware Installation Guide x About This Guide v1.0, Novemb er 2007 • Scope. This manual is written for the GS 700TP according to these specifications: How to Use This Manual The HTML version of this ma nual includes the following: • Buttons, and , for browsing forwards or backwards through the manual one pag e at a time.
GS700TP Hardware Installa tion Guide About This Guide xi v1.0, November 2007 – Click the print icon in the upper left of the window . • Printing the Full Manual - Use the Complete PDF Manual link at the top left of any page. – Click the Complete PDF Manual link at the to p left of any p age in the manual.
1-13 v1.0, November 2007 Chapter 1 Introduction The NETGEAR Smart Switch is a state-of-the-a rt, high-performance, IEEE-compliant network solution designed for user s who require a lar ge number of ports and want the power of Gig abit connectivity to eliminate bottlene ck s, boost performan ce, and increase productiv ity .
GS700TP Hardware In stallation Guide Introduction 1-14 v1.0, November 2007 switch information, VLAN for traffi c control, port trunking for in creased bandwidth, and Class of Service (CoS) for traffic prioriti zation. These features provid e b etter understandi ng and control of the network.
GS700TP Hardware Installation Guide 1-15 Introduction v1.0, Novemb er 2007 Switch Features The following list identifies the key fe atures of the NETGEAR Smart Switch. • 24/48 RJ-45 10/100/10 00M auto-sensing Giga s witching ports. • Small Form-factor Pluggable (SFP) GBI C slo ts, which fun cti on as combo po rts.
GS700TP Hardware In stallation Guide Introduction 1-16 v1.0, November 2007 • SFP types supported are: – 1000Base-SX – 1000Base-LX – 100Base - FX • The devices support full Netgear Smart Switc h functionality and prov ide full compatibility with the following IEEE standards: – IEEE 802.
GS700TP Hardware Installation Guide 1-17 Introduction v1.0, Novemb er 2007 – Support 24-Port PO E function, 15.4W for 12 ports , 8W for 24 ports , T otal 192W for POE.
GS700TP Hardware In stallation Guide Introduction 1-18 v1.0, November 2007 • Rack-mount Kit for installing the switch in a 19-inch rack • Installation Guide • Smart Switch Resource CD with Smart.
2-29 v1.0, September 2007 Chapter 2 Inst allation This chapter describes the installation proced ures for your NETGEAR Smart Switch. Switch installation involves the following steps: Step 1: Preparing.
GS700TP Hardware In stallation Guide Installation 2-30 v1.0, September 2007 S tep 2: Inst alling the Switch The NETGEAR Smart Switch can be installed on a flat surface or in a standard 19-inch rack. Inst alling the Switch on a Flat Surface The switch ships with four self-adh esive rubber footpads.
GS700TP Hardware Installation Guide 2-31 Installation v1.0, September 2007 5. T ighten the screws with a #2 Phillips screwdriver to secu re the switch in the rack. S tep 3: Checking the Inst allation Before applying power perform the following: • Inspect the equipme nt thoroughly .
GS700TP Hardware In stallation Guide Installation 2-32 v1.0, September 2007 S tep 4: Connecting Devices to the Switch The following procedure describes how to conn ect PCs to the switch’ s RJ-45 ports.
GS700TP Hardware Installation Guide 2-33 Installation v1.0, September 2007 T o install an SFP GBIC module: 1. Insert the SFP module into the SFP module bay . 2. Press firmly to ensure the modu le seats into the connector S tep 6: Applying AC Power NETGEAR Smart Switch does not ha ve an ON/OFF switch.
GS700TP Hardware In stallation Guide Installation 2-34 v1.0, September 2007 S tep 7: Managing the Switch through a W eb Browser or the PC Utility for Initial Configuration The NETGEAR Smart Switch contains software for viewing, changing, and monito ring the way it works.
3-19 v1.0, November 2007 Chapter 3 Physical Description This chapter describes the NETGEAR Smart Sw itch hardware feature s. The topics include: • GS724TP Front and Back Panels Configuration • GS7.
GS700TP Hardware In stallation Guide Physical Description 3-20 v1.0, November 2007 • System LEDs Figure 3-2 illustrates the NETGEAR GS724TP Smart Switch back panel: The back panel c ontains the following: • A 100-240V AC/50-60 Hz universa l in put, wh ich is a standard AC power receptacle for accommodating the supplied power cord.
GS700TP Hardware Installation Guide 3-21 Physical Description v1.0, Novemb er 2007 Figure 3-4 illustrates the NETGEAR GS724TP Smart Switch back panel: The back panel c ontains the following: • A 100-240V AC/50-60 Hz universa l in put, wh ich is a standard AC power receptacle for accommodating the supplied power cord.
GS700TP Hardware In stallation Guide Physical Description 3-22 v1.0, November 2007 System LEDs The following table describes th e system LED designations. PoE Mode • Off - No Po E-powered device (PD) connected. • Solid Green - The PoE powered device (PD) is connected and the port is supplying power successfully .
GS700TP Hardware Installation Guide 3-23 Physical Description v1.0, Novemb er 2007 Device Hardware Interfaces This section provides information fo r the following hardware interfaces: • RJ-45 Ports • SFP GBIC Module • Factory Defaults Button RJ-45 Port s RJ-45ports are auto-sensing ports.
GS700TP Hardware In stallation Guide Physical Description 3-24 v1.0, November 2007 SFP GBIC Module The GBIC module bays accommodate standard SFP GBIC modules, such as the AGM731F , AGM732F , or AG M733 from NETGEAR, allowing fibe r connections on the networ k.
A-1 v1.0, November 2007 Appendix A T roubleshooting This chapter provides information about troubl eshooting the NETGEAR Smart Switch. The topics include the following: • T roubleshootin g Chart • Additional T roubles hooting Suggestions T roubleshooting Chart The following table lists symptoms, cau ses, and solutions of possible problems.
Troubleshooting A-2 v1.0, November 2007 Additional T roublesh ooting Suggestions If the suggestions in T roublesh ooting Chart do not resolve the problem, refer to t he troubleshooting suggestions in this section.
A-3 Troubleshooting v1.0, Novemb er 2007 Auto-negotiation The RJ-45 ports negot iate the correct duplex mo de and speed if the device at the other end of the link supports auto-negotiation. If the device does not support auto negotiation, the swit ch only determines the speed correctly and the du plex mode defaults to half-dup lex.
B-1 v1.0, November 2007 Appendix B T echnical S pecifications Network Protocol and St andards Compatibility IEEE 802.3i 10Base-T IEEE 802.3u 100Base-TX,FX IEEE 802.3ab 1000Base-T IEEE 802.3z 1000Base-X IEEE 802.3x flow control IEEE 802.3af (DTE Power via MDI) Management W indows 20 00 + XP; Microsoft Explorer 6.
B-2 Technical Specifications v1.0, Novemb er 2007 Mean T ime Between Failure (MTBF): 165,589 hours for GS72 4TP , 147,558 h ou r s for GS7 48TP Power Supply Power Consumption : 260W for GS724TP , 570W for GS7 48TP 100-240V AC/50-60 Hz universa l input Physical Specifications Dimensions (H x W x D): GS724TP/GS724TP: 1.
Technical Specifications B-3 v1.0, November 2007 UL listed (UL 1950) / CUL IEC950 / EN60950 Modules AGM731F 1000Base-SX SFP GB IC for multimode fiber AGM732F 1000Base-LX SFP GBIC for single mode fiber.
Index-1 v1.0, November 2007 Index Numerics 1000Base-LX 1-2 1000Base-SX 1-2 1000Base-T 1-2 1000Base-X 1-2 100-240V AC/50-60 2-6 100Base-TX 1-2 10Base-T 1-2 1U 1-3 8-pin 2-9 A AC Power 2-6 , 2-7 AGM731F.
Index-2 v1.0, November 2007 Hz 2-6 , 2-7 I IEEE 802.3ab 1-2 IEEE 802.3i 1-2 IEEE 802.3u 1-2 IEEE 802.3x 1-2 , 1-3 IEEE 802.3z 1-2 IEEE Standards 1-2 IEEE-compliant 1-2 Installation Guide 1-4 Installin.
Index-3 v1.0, Novemb er 2007 User ’ s Manual 1-4 UTP 4-16 V V entilation 4-14 VLAN 1-1 W Wa r r a n t y 1-4 W eb-based Graphical User Interface 1-1.
Ein wichtiger Punkt beim Kauf des Geräts NETGEAR GS724TPS-100NAS (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie NETGEAR GS724TPS-100NAS noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für NETGEAR GS724TPS-100NAS - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von NETGEAR GS724TPS-100NAS reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über NETGEAR GS724TPS-100NAS erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon NETGEAR GS724TPS-100NAS besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von NETGEAR GS724TPS-100NAS verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit NETGEAR GS724TPS-100NAS. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei NETGEAR GS724TPS-100NAS gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
