Benutzeranleitung / Produktwartung X651UHD des Produzenten NEC
Zur Seite of 55
Lar ge Format Display User’ s Man ual MultiSync X651UHD.
Inde x DECLARA TION OF CONFORMITY ............................................................................................................. English-1 Important Information ...........................................................................
English-1 English DECLARA TION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
English-2 Impor tant Inf ormation TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT T O RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPT ACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULL Y INSER TED.
English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MUL TI-FUNCTION MONITOR: • DO NOT OPEN THE MONITOR . There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
English-4 Contents Y our new MultiSync monitor box* should contain the following: • LCD monitor • Power cord* 1 • V ideo Signal Cable (DisplayPort cable) • V ideo Signal Cable (Mini DisplayPor.
English-5 English This de vice cannot be used or installed without the T abletop Stand or other mounting accessor y f or suppor t. For proper installation it is strongly recommended to use a trained, NEC authorized ser vice person.
English-6 Attaching Mounting Accessories The monitor is designed for use with the VESA mounting system. 1. Attach eyebolts (not inc luded) for mounting This model is equipped with attachable eyebolts to aid in mounting. • Screw the eyebolts into eyebolt holes as shown in the picture.
English-7 English 3. Using Option Board 1. T urn off the main power switch. 2. Remove the attached slot cover by unscrewing the installed screws ( Figure 1 ). 3. Insert option board in to the monitor . Attach the slot cover by using the removed screws.
English-8 P ar ts Name and Functions Contr ol P anel 쐃 PO WER button ( ) Switches the power on/off. See also page 16. 쐇 MUTE button (MUTE) Switches the audio mute ON/OFF . 쐋 INPUT button (INPUT) Acts as SET/POINT ZOOM button within OSD menu. (T oggle switches between [DVI1], [DVI2], [DPORT], [HDMI1], [HDMI2], [HDMI3], [HDMI4], [OPTION]*).
English-9 English T erminal P anel 쐃 A C IN connector Connects with the supplied power cord. 쐇 Main P ower Switc h On/Off switch to turn main power ON/OFF . 쐋 Service por t This USB slot is for future software upgrades. 쐏 LAN port (RJ-45) LAN connection.
English-10 Wireless Remote Contr ol 쐃 PO WER button Switches the power on/standby . 쐇 INPUT button Selects input signal. HDMI1: HDMI1 HDMI2: HDMI2 HDMI3: HDMI3 HDMI4: HDMI4 DVI1: DVI1 DVI2: DVI2 DisplayPort: DPORT OPTION: OPTION* 2 쐋 MUL TI INPUT b utton Selects input signal.
English-11 English Operating Range for the Remote Contr ol Points the top of the remote control toward the LCD monitor ’s remote sensor during button operation. Uses the remote control within a distance of about 7 m (23 ft.) from remote control sensor or at a horizontal and vertical angle of within 30° within a distance of about 3.
English-12 1. Determine the installation location CA UTION: Installing your LCD monitor must be done by a qualifi ed technician. Contact your dealer for more information. CA UTION: MOVING OR INST ALLING THE LCD MONIT OR MUST BE DONE BY FOUR OR MORE PEOPLE.
English-13 English 5. Switch on the power of all the attac hed external equipment When connected with a computer , switch on the power of the computer fi rst. 6. Operate the attached external equipment Display the signal from the desired input source.
English-14 Connections NO TE: Do not connect/disconnect cables when turning on the monitor or other external equipment as this may result in a loss of the monitor image. NO TE: Use an audio cable without a built-in resistor . Using an audio cable with a built-in resistor turns down the sound.
English-15 English Connecting a P ersonal Computer Connecting your computer to your LCD monitor will enable you to display your computer ’s screen image. Some display cards may not display an image correctly . Y our LCD monitor displays proper image by adjusting the factory preset timing signal automatically .
English-16 Basic Operation P ower ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red or amber while powered off. NO TE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the Power Button.
English-17 English Aspect DVI1, DVI2, DPORT , OPTION* 4 , PRESET1* 5 , PRESET2* 5 FULL 1:1 ZOOM NORMAL HDMI1, HDMI2, HDMI3, HDMI4, PRESET1* 5 , PRESET2* 5 FULL WIDE DYNAMIC 1:1 ZOOM NORMAL *4: This function depends on which option board you use. *5: This function depends on INPUT CONFIGURA TION setting.
English-18 INPUT CONFIGURA TION Y ou can display 3840 x 2160 60 Hz image by using multiple input signals. Selects input sources. Depending on the setting at HDMI/DVI SELECT , the selection of INPUT CONFIGURA TION is changed.
English-19 English Picture Mode Depending on the setting at SPECTRA VIEW ENGINE (see page 31), selection of Picture mode is changed. SPECTRA VIEW ENGINE is “ON”: Selects fi ve picture modes by Picture mode in OSD menu or using Picture mode button on the wireless remote control.
English-20 GAMMA Allows you to manually select the brightness level of grayscale. There are fi ve selections: sRGB, L ST AR, DICOM SIM. and CST . We recommend to show grayscale image data on screen. sRGB: GAMMA setting for sRGB. L ST AR: GAMMA setting for Lab color space.
English-21 English SPECTRA VIEW ENGINE is “OFF”: Selects fi ve picture modes by Picture mode in OSD menu or using Picture mode button on the wireless remote control.
English-22 OSD (On-Screen-Displa y) Contr ols NO TE: Some functions may not be available depending on the model or optional equipment. PICTURE MODE Goto Adjustment S ele c t Return Clos e 70 50 50 50 50 50 THANK YOU FOR SA VING THE ENVIRONMENT . CARBON FOOTPRINT 86.
English-23 English Setting Default PICTURE BACKLIGHT* 1 Adjusts the overall image and background brightness. Press + or - to adjust. NOTE: When MODE1 or MODE2 is selected in ROOM LIGHT SENSING, this function cannot be changed. Depends on destination CONTRAST* 1 Adjusts the image brightness in relationship to the input signal.
English-24 ZOOM The image can be expanded/reduced. NOTE: The expanded image which is outside of active display area is not shown. The reduced image may have some image degradation. - ZOOM Maintains the aspect ratio while zooming. - HZOOM Amount of horizontal zoom.
English-25 English SCHEDULE LIST List of schedules. - DA TE & TIME Sets the date, time, and daylight saving region. Date & time must be set in order for the “SCHEDULE” function to operate. See page 32. YEAR Confi gures the year for the real-time clock.
English-26 TEXT TICKER OFF MODE Enables T ext T icker and allows you to set Horizontal or Vertical direction. POSITION Selects the location of the T ext T icker on the screen. SIZE Determines the size of the T ext T icker in relationship to the overall screen size.
English-27 English MUL TI DISPLA Y ID CONTROL Sets the monitor ID number from 1-100 and group ID from A-J. DETECTED MONITORS shows the number of all monitors which follow in the chain with LAN.
English-28 HEA T ST A TUS Displays status of the F AN, BACKLIGHT and TEMPERA TURE. - F AN CONTROL Cooling fan reduces the temperature of the display to protect from overheating. If “AUTO” is selected, you can adjust the start temperature of the cooling fan and fan speed.
English-29 English AD V ANCED OPTION1 INPUT DETECT Selects the method of input detection the monitor uses when more than two input devices are connected. NOTE: When SUPER is selected in INPUT CHANGE, this function cannot be changed. NONE NONE The Monitor will not search the other video input ports.
English-30 DEINTERLACE Selects the IP (Interlace to Progressive) conversion function. NOTE: For DVI input “DVI-HD” needs to be enabled in the DVI mode menu. ON ON Converts interlaced signals to progressive. This is the default setting. OFF Disables IP conversion.
English-31 English AD V ANCED OPTION2 AUTO DIMMING* Adjusts the backlight of the LCD automatically depending on the amount of ambient light. - AUTO BRIGHTNESS DVI1, DVI2, DPORT , OPTION* 1 , PRESET* 2 , PRESET2* 2 inputs only . Adjusts the brightness level according to the input signal.
English-32 NO TE 1: CREA TING A SCHEDULE The schedule function allows the display to be set to power on and off at dif ferent times. Up to seven different schedules can be programmed. T o program the schedule: 1. Enter the SCHEDULE menu. Highlight SCHEDULE SETTINGS using the up and down buttons.
English-33 English REMO TE CONTROL ID FUNCTION REMO TE CONTR OL ID The remote control can be used to control up to 100 individual MultiSync monitors using what is called the REMOTE CONTROL ID mode. The REMOTE CONTROL ID mode works in conjunction with the Monitor ID, allowing control of up to 100 individual MultiSync monitors.
English-34 Y ou can control multiple monitors by using RS-232C, REMOTE IN or LAN daisy-chain connection. NO TE: Multiple monitors that are daisy-chained have a limit to the connectable monitors. When manually specify the ID number or control by the specifi ed ID number , please execute AUTO ID (see page 27) previously .
English-35 English This LCD monitor can be controlled by connecting a personal computer with a RS-232C (reverse type) terminal. Functions that can be controlled by a personal computer are: • Power ON or OFF . • Switching between input signals. • Sound Mute ON or OFF .
English-36 3) Control command diagram For other commands, please see “External_Control.pdf” fi le on the CD-ROM. Function (Monitor ID = 1) Code Data Power ON 01 30 41 30 41 30 43 02 43 32 30 33 4.
English-37 English Connecting to a Netw ork Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings by using an HTTP server function. T o use a LAN connection, you are required to assign an IP address. Example of LAN connection: Server Hub NOTE: Use a category 5 or higher LAN cable.
English-38 Preparation Before Use Connect the monitor to a commercially available LAN cable before engaging in browser operations. Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the setting method.
English-39 English Network Setting Click “NETWORK” on the left side of HOME. IP SETTING Set for IP ADDRESS SETTINGS. AUTO: Automatically assign an IP address. MANUAL: Set your IP address of the network connected to the monitor . NOTE: Consult your network administrator for the IP address when [AUT O] is selected for [IP SETTING].
English-40 Mail Setting Click “MAIL” on the left side of HOME. This option notifi es your computer of an error message via e-mail when using wired LAN. An error message notifi cation will be sent when an error occurs in the monitor . ALERT MAIL Checking [ENABLE] will turn on the Alert Mail feature.
English-41 English Alert error message list Error n umber * ErrorCode Alert mail Message Explanation Measure 70h ~ 7Fh The monitor ’s power supply is not functioning normally . Standby power Abnormal Please contact your supplier . 80h ~ Fh The cooling fan has stopped.
English-42 SNMP Setting Click “SNMP” on the left side of HOME. This function allows for getting status and controlling of a monitor via the network. V ersion: SNMP v1 Authenticated plaintext by community name, not return a confi rmation message of T rap.
English-43 English AMX Setting Click “AMX” on the left side of HOME. AMX BEACON T urn on or of f for detection from AMX Device Discovery when connecting to the network supported by AMX’s NetLinx control system.
English-44 Name Setting Click “NAME” on the left side of HOME. MONITOR NAME Set a monitor name. The name must be 16 characters or less. The default is model name. HOST NAME T ype in the hostname of the network connected to the monitor . Up to 15 alphanumeric characters can be used.
English-45 English PD List Information Click “PD LIST” on the left side of HOME. Show the list of ID and IP address of multiple monitors that are daisy-chained. Only the master monitor can show the list. Memo Setting Click “MEMO” on the left side of HOME.
English-46 Using “SET/POINT ZOOM” button on a remote control allows to enlarge a partial of image. Press CH+/- button to zoom up or down. The image can be expanded from 1 to 10 times. 1 Press [SET/POINT ZOOM] button on a remote control. An icon will be a magnifi er .
English-47 English This function allows to get the data of monitor ’s status by wireless communication even while the monitor is of f. Some menu of OSD, you can set by this function. NO TE: Sensor position: See page 9. Please contact your supplier for detailed information.
English-48 Reduced Footprint: Provides the ideal solution for environments with superior image quality . SPECTRA VIEW ENGINE: This system is designed for professionals with color-critical applications.
English-49 English No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Check the main Power Switch, it should be in the ON position. • Power Switch and computer power switch should be in the ON position.
English-50 Either light vertical or horizontal stripes may appear , depending on the specifi c display pattern. This is no product fault or degradation. “SCHEDULE”/“OFF TIMER” function is not working properl y • The “SCHEDULE” function will be disabled when the “OFF TIMER” is set.
English-51 English Specifi cations Product Specifi cations LCD Module Pixel Pitch: Resolution: Color: Brightness: Contrast Ratio: Viewing Angle: 65”/1639.0 mm diagonal 0.372 mm 3840 x 2160 Over 1073 million colors (depending on display card used) 450 cd/m 2 (Max.
English-52 NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’ s top priorities in trying to minimize the burden placed on the environment.
English-53 English WEEE Mark (Eur opean Directive 2012/19/EU) Within the Eur opean Union EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste.
Ein wichtiger Punkt beim Kauf des Geräts NEC X651UHD (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie NEC X651UHD noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für NEC X651UHD - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von NEC X651UHD reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über NEC X651UHD erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon NEC X651UHD besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von NEC X651UHD verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit NEC X651UHD. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei NEC X651UHD gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
