Benutzeranleitung / Produktwartung SP B-Series des Produzenten NEC
Zur Seite of 146
A New Dir e c tio n In Cutt ing -Edge Techno logy D IRE CTION ™ SP B- S ERIES SERVICE AND REFERENCE MAN UAL.
First P rin ting — A pril 1999 Copy right 1999 NEC Com pute r S ystem s Divi sion Pa ckard Bell NEC, Inc. 1 Pa cka r d Bell Way Sacramen to , CA 95828-0903 All Ri gh ts Re se rved Proprieta ry Noti .
Contents iii Contents Pre face .............................................................................................................................ix A bb r e vi atio n s .......................................................................
iv Conte nts B oo t Me n u ..............................................................................................................2-1 3 Hard Dri ve Subm en u ......................................................................................
Contents v 5 Disass embly and Reassembly Di sasse m bly .................................................................................................................. 5- 3 Sy ste m Ac ce ss Co ve r .................................................
vi Co nten ts C Sy stem Resour ces IRQ Se tti ng s .................................................................................................................. C -2 Sy ste m R e sou rce In fo r m atio n ..........................................
Co ntent s vii List o f Fig ures Fro n t Fe ature s – De sk to p Mo de l s .......................................................................................... 1-2 Re ar Fe ature s – D e sk top Mod el s ......................................
viii Con tent s List o f Tab le s Sy ste m Mem o r y M ap ............................................................................................................ 1- 7 In t e rrupt Le vel A ss ign me nts ...........................................
Prefa ce ix Preface This ser v ice and re ference ma nua l co nt a ins t echnica l in for mat i o n necessar y for servicing an d repa iring Di rect i o n™ SP B-Seri es syste ms. The man ua l includes syste m setup inf or mati o n, pro cedures for in sta lli ng o pt i o ns, and t roubleshoot i ng.
xi Aa m p e r e A C al tern atin g c urren t AT advanced t echno log y (IBM PC) BBS Bu llet in Bo ar d S er vice BCD binary - co d ed decimal BCU BI OS Cust o mized Ut il i t y BIOS basic i n put /out.
xii IPC i n tegrated pe ri p he ral co nt ro ller ips inches per second IRQ i n terrupt requ e s t K kil o (1024) k kil o (1000) KB k ilo b yt e kg kil ogra m kHz k il o hert z lb pound LE D l ig ht -.
1 Technical Information Overview Syste m Boa r d Modem B oard (opt ional) Diske tte Dr ive Hard Drive CD-ROM/DVD Dri ve Zip Driv e Power Supply Power Management.
1-2 T echni cal Inf orm atio n The sect i on pro v i des a n o verview o f t he NEC Direct ion™ SP B- Ser ies co mputers. I nfor m at i o n inc ludes: an over view o f syste m feat ur es descript ion of syste m co m po nents.
Techn ica l Inf orm ation 1- 3 Rear F eatur es – D es ktop Mo dels A – Power Socket B – Mo us e P o r t C – Parallel Port D – Ke yboa rd Por t E – USB Ports F – Ser i al Port 1 G – S e.
1-4 T echni cal Inf orm atio n Front Fea tures – Minitowe r M odels A – C D -ROM /DVD D rive B – Disk ette Dr iv e C – Powe r Lamp D – Power Button E – D isk La mp F – R e se t Bu tto n .
Techn ica l Inf orm ation 1- 5 Audio Connec tors – Minitower Models A – L ine Out Ja ck B – L ine In Jack C – M i crophone Jack D –M IDI/ Game Por t System Board The syst e m boar d co nt ains m o st of the compone nt s that pro v i de s yst e m funct i o ns.
1-6 T echni cal Inf orm atio n The syste m suppor t s t he f o ll ow in g DIM M co nfigurations: 4-Mbi t by 64 (32-MB DIMM) 8-Mbi t by 64 (64-MB DIMM) 16-Mbi t by 64 (128-MB DIMM). Chipset The Inte l 440B X chipset pro vides DMA, mem or y , and bus contro l.
Techn ica l Inf orm ation 1- 7 Syst em Mem ory Map Memory Address Size Function 100000-1800000 0 383 MB Ex tended m e m ory E8000-FFFFF 96 KB Syste m BIOS E0000-E7FF F 32 KB Syste m BIOS (av ailable a.
1-8 T echni cal Inf orm atio n Interrupt Lev el Assignments I R Q Sys t em R e so u r c e NMI I/O channe l che ck 00 Reserv ed, in t erv al tim er 01 R eserve d, keyboard cont roller 02 Res er v ed , .
Techn ica l Inf orm ation 1- 9 IDE Po rts The syst e m bo ar d pro vi des t wo f ast I DE port s: pr im ar y c han nel a nd secondar y channel. Each port suppo rt s two devi ce s for a total of four I DE devi ces.
1-10 T echn ical In form ation The opti o nal AWE64D PCI sound board repl a ces t he integrat ed audi o s ys t e m. It pro vides FM syn t hesis and 64 simul ta neous vo ices . M od em Board (optional) O pti on al m odem b oa rd s i n cl ud e : U.S . R ob oti cs ® 56-Kb ps V.
Techn i cal In for m ation 1-11 Power M anagement The A dva nced Power Management (APM) pr o gr am , l o cat ed on t he 82371EB PCI ISA IDE X cel erator (PI IX4E) ch i p, redu ces sy s te m power c on.
2 Ut iliti es BIO S Setup U tili ty Inte l Pr oce ssor Ser ia l N u mber C on trol U t ility.
2-2 Utilities This sect ion pro vides inf o r m at ion on configur ing the co m put er . T he sect i o n inc lu d e s in fo r mat io n o n t he BIOS Se t up Utili t y f or co nf iguring the system Int.
Ut ilities 2-3 How to Sta rt Setup To st art the Setup ut ili t y, fo ll o w t hese steps: 1. Tu rn on or re b oo t th e sy stem . 2. Pr ess F2 aft e r P OST be g ins , bu t be fo r e t he s yst e m bo o t s u p. Yo u hav e a bo u t five seco nds t o pr ess F2 .
2-4 Utilities A Main Me nu su m mar y windo w the area o n the l e ft s ide o f the screen. This area pro vi des a su m mar y o f Ma in Me nu Set up para meters. So me M ai n Men u p ara m e ter s c a n b e s e t f rom thi s wi nd ow or th ey can b e s e t f ro m s u bmenus.
Ut ilities 2-5 Le ge nd Ba r Use t he keys list ed in the l ege nd bar o n t he botto m of t he Set up m enu to m ake t he select i o ns o r exi t t he curr ent menu. T he f o ll o w ing t able descr ibes t he lege nd keys an d t hei r a l t er nat es.
2-6 Utilities Mai n Men u Thi s se ct i on d es crib es the Mai n M en u pa rame ters. O t her m e nu p aram eters are available by se lect in g su bmenu s. Use t he arrow key s to m o ve t he curso r to a para meter and press Enter to se l ect a submenu.
Ut ilities 2-7 Ad va nced Menu T h is s e c t io n d e s c r ib e s t he Ad va nc e d M e nu p a r a me t e r s . Ot he r me nu p a r a met e r s are availa ble by se lect in g su bmenus. Use t he arro w keys to m ove t he curso r to a para meter and press Enter to se l ect a submenu.
2-8 Utilities Mo de ( P ar a lle l P o rt ) Th i s op ti on se ts th e m ode f or th e pa ral l el po rt . Th e opti on s i ncl ude “Ou t p u t O n ly” ( AT - c o mpa t ib le mo d e ) , “B id ir.
Ut ilities 2-9 Mu l t i S ect or T r ansf ers T h is o pt io n d e t e r min e s t he nu mb e r o f se c t o r s p e r blo c k fo r mu lt ip le sect or transfers. I f necessar y, check t he specificat i on for your hard dr ive to de t er mine the best sett ing f or opt imum dr ive perfor m a nce.
2-10 Utilities Ul tra D M A Th i s op ti on se ts th e Ul tra D M A Mod e f or th e h ar d dr i ve . T h i s opti on cannot be ch a nged when “Auto ” is se lect ed. The opt ions include: Mode 0 Mode 1 Mode 2 Disabled. T o r et ur n t o t he Ad va nc e d M e nu , p r e s s Esc .
Ut ilities 2-1 1 DMI Event Log ging Submenu This s u bmenu can b e used to view an d m o d ify DMI Even t Lo gs. To enter t he subm enu, highlight the DMI Event Loggin g field, then press Ent er .
2-12 Utilities Resource Con fi gurati on Submenu This opti o n all o ws y o u to reserve s pecif ic resour ces f or use by legacy ISA devices. To enter the s ubmenu, highlight this field, then press Ent er .
Ut ilities 2-1 3 Pow er Menu The Po wer Menu is used to enable or disable t he syste m’s po wer management f e a tur e s . W hen th e p owe r m an a gem en t op ti on i s e n ab l ed , th e f o l l owi n g op ti on s appear in the P o wer Menu: P o w e r M a na g e me nt This f eat ur e lets you enabl e or di sa ble BIOS po wer m anagement .
2-14 Utilities Scan User Flas h Area This opt ion configures t he BIOS to scan the flash mem or y for user binar y files t hat ar e executed at boot tim e.
Ut ilities 2-1 5 Exit M e nu The Exit Me nu a ll ow s y o u t o choo se ho w to exi t t he Setup progr am . P r ess t he arrow ( cur sor) key s to se lect t he desired opti o n, t hen press Ent er to ma ke y our cho ice (or use t he arro w key to sel e ct anot her one).
2-16 Utilities This ut ili t y pla ces a n icon in the Windo ws s yst e m tray. The icon pro vides a vis u a l st at us of the processo r seri al nu mber. Yo u hav e the opt i o n o f hiding the syst e m tray icon. Yo u can di sa ble t he processo r ser ial number at any t ime.
Ut ilities 2-1 7 Why w ould I want to turn off my processor s erial number? Inte l b elieve s t he pro cesso r serial number can pro vide co mpelling benefi t s to users.
2-18 Utilities Errat a The t echni ca l support num ber in the h elp fil e is i n co rrect. The cor rect t elephone number for Custo m er Support for Japan is 0298- 47- 080 0 (I n tel Ho tL i n e Serv ice).
3 Option Installat ion General Rules Prec auti ons Acc ess Cover Rem o val Acc ess Cover Repl ac em ent Expansion B oards Mem ory Upgrade Data St orage Devi c es External Opt i ons.
3-2 O ption I n stal lation T his se ct io n pr o v i d e s inst r u ct io ns fo r inst a ll in g t he fo llo w in g o p t io ns: expansi o n b oar ds mem or y upgrade dat a storage devices e x tern al op ti ons . All o p t ions ( except ext er nal opt i o ns) r equ ire re moval o f t he access co ver.
Option I nstallati on 3 -3 Avo id carpets in co o l, dr y areas. Leave an o ption, such as a board or chi p, in it s ant i -st at ic packaging unt il read y t o insta ll it.
3-4 O ption I n stal lation 4. Lo o sen t he t hu mb screw at the rear of the syst em by t ur n ing it co unt er clockw ise. I f y o u insta lled a l o ck o n the back of t he syst e m, unl ock t he l ock and re mo ve it. Press t he ri g ht r elease t ab.
Option I nstallati on 3 -5 Aligni ng the Tabs A – Ta bs B – S lots 3. S lide t he access co ver f o r war d to meet the f ro nt pane l. 4. Ti gh te n th e th um b sc re w.
3-6 O ption I n stal lation P C I exp a ns io n bo a r ds r u n a t o ne ha lf t he s yst e m ho st ’ s bu s s p e e d . T he P CI bu s handles 32 bi ts o f data at a tim e, being w i der as well as fas t er t han the standard IS A b us. P CI bo ar ds can se nd a nd rece ive dat a m uc h fast er , thereby bo o sting syst e m perfor ma nce.
Option I nstallati on 3 -7 Removing the Slot Cover A – Sc rew B – S lot Co ve r S a ve t he s c r ew fo r ins t a ll in g t he e xp a ns io n bo a r d . Be s u r e to s a ve t he s lo t cov er f o r f uture us e. ! CA UT ION A slot c ov er can dam age t he system board or any opti on board if it f alls i nt o the system.
3-8 O ption I n stal lation Ins talling a Boa rd 7. At t ach any ca bles requ ired by t he expans io n b o ar d. 8. Rep lace t he access co ver. Expa ns io n B oar d R em ov al Use t he f o ll o w ing st eps t o rem o ve a bo ar d fro m the syste m. 1.
Option I nstallati on 3 -9 When upgrad ing y o ur s y st e m mem or y, n o t e the f o l lowing co ndit i o ns: Be sure to use 168- pin 3.3V DIMMs w ith gold-plat ed co nt acts. Bus s peed o f 100 M Hz is supported. No n-Er ror Correct ing an d Checking (64-bit) DI MMs ar e suppo rted.
3-10 Option Inst al latio n Sample Memory Configurati ons Bank 0 Bank 1 Bank 2 Tot al RA M 128 MB 32 MB 32 MB 192 MB 128 MB 64 MB E m pty 192 M B 128 MB 64 MB 32 MB 224 MB 128 MB 64 MB 64 MB 256 MB 12.
Opt ion In st allat ion 3-11 DIM M Inst all ati o n Use t he f o ll o w ing pro cedur e to inst a ll a DIMM. 1. Re m o ve t he access co ver. 2. Lo cat e the DIMM so cket s. 3. Remove any current ly - inst a lled DIMMs t hat ar e not needed. See t he p r e v io u s s e c t io n “ D I M M R e mo va l.
3-12 Option Inst al latio n Devi ce S l ot s Yo ur c o mputer has seven s t o r age device sl o t s: o ne 3 1/2-in c h access ib le device slot ( co ntains the standard 1.
Opt ion In st allat ion 3-13 The st andard I DE hard dr ive is set as t he mast er device on the pr imary IDE co nn ect o r. The standard CD- ROM dr ive is t he master device on the seco ndar y IDE co nnecto r .
3-14 Option Inst al latio n Di skette Dri ve Signal Cable A two- connect or diskett e drive signa l ca ble co m es at t ached to the sy st e m boar d and to the standard 1.
Opt ion In st allat ion 3-15 IDE Signa l Cable A – C on ne cts to Sys te m Bo ard IDE Po rt B – C on ne cts to IDE De vice s System P ower Cables Po wer cables co m e fro m t he po wer suppl y and are att ached to the s t andard sto r age devi ce s.
3-16 Option Inst al latio n Devi ce C ab ling All st orage devi c es r equ i re a po wer and signal ca ble co nnect i o n. Devices shipped w i t h t he syste m are al read y co nnect ed. Cable o ptional devices as fo l lo w s . Cabli ng an IDE Devi ce 1.
Opt ion In st allat ion 3-17 Co nnect ing an Acces sibl e 5 1/ 4-Inch Devic e A – De vi ce Co nne c t or B – Re d Edge C – S ignal C able D – Powe r Cable Stor a ge D ev ice In st all ati on The f o ll o w ing subsect i o ns descr ibe h o w to in st a ll 3 1/2-i nc h and 5 1/4-in ch devices.
3-18 Option Inst al latio n Relea sing the Front Panel A – Two Re lease Tabs B – Rele ase Tab 3. Pu ll the pa nel awa y fro m the ch ass is. Remo ving the CD-ROM / DVD Drive If y o u need t o rem ove the CD-ROM/D VD dr iv e, you need to rem ove t he access ible device cage.
Opt ion In st allat ion 3-19 2. S li de t he cage to war d s the f ro nt of the syst e m and lif t it o ut of t he uni t . Installi ng a 3 1/2-I nch Devi ce Use the f o ll o w ing pro cedur e to i nst a ll a 3 1/2-inch device.
3-20 Option Inst al latio n Rem ovin g t he Br acket Sc rews A – T w o D r i v e Br a c k et S c r ews S lide the 3 1/2-inch hard driv e bracket to war ds t he back of t he syst e m uni t unt il i t i s f ree of t he m o l ded p last i c.
Opt ion In st allat ion 3-21 Secu rin g t he Dri ve S lide the bracket into the m o l ded p last ic drive sl ot . S ecur e t he b racket to t he f ro nt panel wi t h the t wo screws show n in “Rem o ving the Bracket Screw s.
3-22 Option Inst al latio n 6. T o insta ll a 3 1/2-inch devi ce in an access ible s l o t : Rem o ve t he p l ast i c blank panel fro m the s e lect ed sl ot by pressing the panel tab in w ard and swing ing t he bl a nk panel o ut ( see the fo ll ow ing figure).
Opt ion In st allat ion 3-23 Installi ng a 5 1/4-I nch Devi ce Inst a ll a n access ib le device into t he device slot as foll o w s. 1. Fo ll ow t he preinsta llat ion inst r u ctions t hat ca m e wi t h the device, such a s se t t ing ju mp e r s a nd s w it c he s .
3-24 Option Inst al latio n In sta l l i ng th e Dev ice Note : If you rem ov ed the acc essibl e devic e c age, repl ac e it . Secur e the devi c e cage with the screw. 12. If y o u inst a lled a h ard dr ive in t he 5 1/4-inch sl ot , r epl ace t he p last i c panel.
Opt ion In st allat ion 3-25 Exte rnal Options Ext er nal connecto rs on the b ack o f the syst e m u n i t a ll o w for a var iet y of indus t r y -st andard o pt i o ns This su bsect i o n pro v i d.
3-26 Option Inst al latio n RS-23 2 C D evi ce C o nn ec tion Note : Befor e connect i ng a serial devic e to the system , be sure the serial dev ic e is set up corr ec tl y. F oll ow the setup instr uc t i ons that come wit h the option. 1. Tur n off power to the syste m an d to the ser i a l device.
4 Mai ntenance and T roubl eshooti ng Maintenanc e Troubles hooti ng.
4-2 M a intenance and Troubleshooting This s ect i on pro vides inf or mat ion on m ain t a ining and tro ublesh o ot ing the D i rect i on SP B- S er ies co m put er s. Als o included in t his sect ion are syste m err o r beep code descri pt i ons and a pro cedur e f o r r epl acing t he CMOS battery .
Mainte nance and Troubleshooting 4 -3 Syst em C le a ning Use t he f o ll ow ing pro cedur e for cleaning the system. 1. Po wer off t he syste m a nd unplug all power cables. 2. Per i o dically wipe the outs i de o f the syste m , ke yb o ar d, m o use, and m o nito r w ith a soft, cl e an c lot h.
4-4 M a intenance and Troubleshooting Locat ing th e Mous e Ba ll C o ver A – M o us e B a l l C ov er 4. T ur n t he m ouse o ver and rem o ve t he ball. 5. Clea n t he m o use as fo ll ow s: Cl ean th e m ous e b all wi t h ta p w a te r a n d a m il d d e te rg e n t, th en dry i t w i t h a lin t - f ree c l o t h.
Mainte nance and Troubleshooting 4 -5 Probl e ms and Solu ti ons Probl em Sy m pto m Solution No powe r Powe r lamp on co mpute r does not light. Che ck that the powe r cord is plugge d into the AC conne ct or on the co mputer . Ch ec k t h at th e ot h er en d of t h e c or d i s plugged into a live properly grounde d AC powe r outlet.
4-6 M a intenance and Troubleshooting Probl e ms and Soluti ons Probl em Sy m pto m Solution Co m pute r halts d uring loadi ng se quence. Po w er t h e c om p ut er of f.
Mainte nance and Troubleshooting 4 -7 Probl e ms and Solu ti ons Probl em Sy m pto m Solution Mode m board ma lfu n ct ion N o output from boa r d. Che ck interrupts (see Appe ndix C, “Syste m Resource s”). Che ck DM A channels (se e Se cti on 1, “Technica l Info rmation”) .
4-8 M a intenance and Troubleshooting Probl e ms and Soluti ons Probl em Sy m pto m Solution Disc t ray doe s not ope n. Syst e m power no t on. Turn on syste m powe r. Syste m powe r failed. Inse rt abou t an inch of a s traightene d pape r clip into the em er g en c y ej ec t ho l e, u nt i l t h e tr ay o p en s.
Mainte nance and Troubleshooting 4 -9 Probl e ms and Solu ti ons Probl em Sy m pto m Solution Co mmunication e rror No or bad da ta whe n co mm un icating. Che ck cab le conne ctions be twe e n the syste m board and device . Ch ec k t h at th e i n t er f a c e p o r t i s s el ec t ed .
4-10 Ma inte nance and Troubleshooting CM OS B at tery R e pla cem e nt Re m o ve t he 3-volt li t hiu m batt er y f ro m the syst e m b o ar d as fol low s. 1. Turn o ff and un p lug the syste m uni t a nd any ext ernal opt i o ns co nnect ed to th e sy s tem .
Mainte nance and Troubleshooting 4 -11 5. Wi t h the posi t ive (+) si de facing up, pr ess the n ew batt er y in to t he s o cket. 6. Rep lace t he syst e m access co ver. 7. Co nnect ext er na l per iphera ls and po wer cables. 8. Run Setup to reco nfi gure s yst e m para met ers ( see Sect ion 2, “Setup Utili t y”).
5 Disassemb l y and Reassembl y Di s a s s em bl y Il lust rat ed Parts B reakdown.
5-2 D i sa sse mbl y a nd Rea sse mbl y This sect i on co nt a ins step-b y - st ep disas se mb l y pro cedur es for the syste m uni t . Reassemb ly is the reverse o f disassembly. The pro cedur es are suppor t ed by sim plified dis assembly illustrat i ons to f acili tat e rem oval.
Di sa sse mbl y a nd Rea sse mbl y 5- 3 ! CA UT ION W hen handli ng boards or chips, gr ound y our sel f t o rel ease st at i c . Disassembly Use the f o ll ow ing pro cedur es to di sass e mble the sy st e m uni t . Note : Unplug the power cord bef ore disassembli ng t he system uni t.
5-4 D i sa sse mbl y a nd Rea sse mbl y Removing a Boar d F r on t Panel Remo val R e mo v e t he fr o nt p a n e l fr o m t he s y s t e m u n it a s fo ll o w s . 1. Lo cat e t he t wo plast ic tabs at the f ro nt o f the ch a ssis. T hey are indicat ed by t wo arro ws engraved on t he chassis.
Di sa sse mbl y a nd Rea sse mbl y 5- 5 Side P an el R em oval Rem o ve t he side panel fro m the sys t e m uni t as f o ll o ws. 1. Re m o ve t he syste m acces s co ver and front pane l as previousl y descr ibed. 2. Locat e the t wo si de pa nel secur ing t abs at the f ro nt of the syst e m.
5-6 D i sa sse mbl y a nd Rea sse mbl y Disk ett e Dr i ve R em o val Re m o ve t he standard disket t e drive fro m the syst em uni t as fo ll o w s. 1. Remove t he syst e m acces s co ver and front pane l as previousl y descr ibed. 2. Label a nd u nplug t he signal and power cables for the d i sket t e driv e.
Di sa sse mbl y a nd Rea sse mbl y 5- 7 Rem ovin g t he 5 1/4- In ch D evice S cre ws 4. S li de t he device out fro m t he front of the syste m uni t . Op tion al 3 1/2- In ch Hard Dr iv e Remo va l Rem o ve t he o ptional 3 1/2- inch hard drive as f o ll ows.
5-8 D i sa sse mbl y a nd Rea sse mbl y 4. S lide the 3 1/2-in c h hard dr ive bracket to war ds t he back of t he syste m uni t unt il i t is f ree of the m o l ded plast i c. 5. Re move t he screw o n the si de o f the hard dr ive secur ing i t to t he bracket .
Di sa sse mbl y a nd Rea sse mbl y 5- 9 Fa n As sem bly Rem ov al Rem o ve t he fan ass e mbly per t he f o ll o w ing steps. 1. Re move t he syst e m access co ver ( see Sect i o n 3, “Opt ion Inst a llat ion”). 2. At the rear o f the syste m uni t , pr ess in on t he t wo l o ck ing tabs secur in g t he asse mb l y to t he chassis.
5-10 D i sa sse mbl y a nd Rea sse mbl y 4. At the back o f the syste m uni t , r e move the t wo screws secur in g t he po wer supply to the syste m uni t ( see t he fo ll ow ing fi gure). Removing the Power Supply Scre ws A – Pow er supp ly scre ws 5.
Di sa sse mbl y a nd Rea sse mbl y 5- 11 Rem ovin g t he Syst em Bo ard Scr ew A – Syste m Board Screw 4. S lide the syst e m boar d to war ds t he fro nt of the uni t unt il is clear o f the meta l sh ie ld in g a nd t he a lig n me nt c lip s . 5.
5-12 D i sa sse mbl y a nd Rea sse mbl y Illustrated Parts Brea kdown This sect ion conta in s t he NEC CSD part descri pt i o ns and the illustrat ed parts breakdown (IP B) figure for the Di rect i on SP B- S er ies deskto p an d mini t o wer co m put ers.
Di sa sse mbl y a nd Rea sse mbl y 5- 13 Direc tion SP B-Series Desktop Field-Replacea ble Parts List * It em D escri p tion 17 3C509C-TX ne twork boa rd 18 Diske tt e d rive si gnal ca ble 19 IDE s i.
5-14 D i sa sse mbl y a nd Rea sse mbl y Direct ion S P B-Se ries D eskt op Illus trat ed Part s B reakd own * _______ * T h i s da ta w as p r epared A p r i l 19 99. Fo r an up- to -date listi ng o f s par e pa rts, please call F axFl ash SM at 1-888-329-0088 (or 1-91 6-379-4780 o utside the U .
Di sa sse mbl y a nd Rea sse mbl y 5- 15 The fo ll ow ing table and IPB li st and illustrat e t he fi e ld-rep laceable part s f o r the mini to wer com put er .
5-16 D i sa sse mbl y a nd Rea sse mbl y Direct ion SP B -Se ries Min ito wer Fi eld -R epl aceab l e Par ts Lis t * It em D escri p tion 21 Spe ake r, in te rna l 22a 6.4-GB ha rd dr ive, IDE UD MA 22b 10.2-GB ha rd dr ive, IDE UD MA 22c 14.5-GB ha rd dr ive, IDE U DMA 23a 32X CD-R OM d rive 23b 40X CD-R OM d rive 24 Iomega ATAPI Z i p drive 25 3.
Di sa sse mbl y a nd Rea sse mbl y 5- 17 Direct ion S P B-Se ries Minit o wer Illus trat e d Parts Br eakdo wn * _______ * T h i s da ta w as p r epared A p r i l 19 99. Fo r an up- to -date listi ng o f s par e pa rts, please call F axFl ash SM at 1-888-329-0088 (or 1-91 6-379-4780 o utside the U .
A S y stem Specifications Pro ce ssor Random Acc ess Memory Read-Only Mem ory Video Memory Calendar Cloc k Input / Output Facil iti es Expansion S lots Keyboard and Mouse St orage Devi c es Devic e S .
A-2 Syst em Specif i cation s Th is sect i o n descr ibes s yst e m spec if icat i o ns. Processo r Micro pro cesso r 350 -MHz, 400- MHz, o r 450-MHz Pen t i u m II pro cessor or 500-MHz Pen t i u.
Syst em Spe cific atio ns A-3 Read-Only Memory Fl ash R OM 2 Mbi t Video M e mory St andard vi deo m e m o r y 8 M B or 16 MB vi deo mem o r y on vi deo boar d Calendar Cloc k Year/Mo nth/Day/Ho ur/Minute/S econd/.
A-4 Syst em Specif i cation s Expansion Slots I/O Bu s PC I/ISA S ix exp a ns io n s lo t s One 8-/16-bi t ISA sl ot Three 32-bi t PCI s l ot s One shared ISA/PCI slot One A GP sl o t Keyboard and.
Syst em Spe cific atio ns A-5 One accessible 5 1/4- inch device sl o t Two 3 1/2-in ch device sl ot s; the l o wer 3 1/2-inch s lot is not access ible on the deskt o p m ode l Graphics Video M.
A-6 Syst em Specif i cation s Sound System The syste m board featur es t he Yamaha DS1-L PCI acce le rat o r and An a log Devices AD1819A SoundPort c o dec. The chi ps pro vide the f o ll o w ing features: 32-vo i ce XG wavet able 3D ster eo support f o r DirectX fu ll- d u p le x a u d io PC/PCI suppor t for l egacy DMAC em u lat ion.
Syst em Spe cific atio ns A-7 Recommended Operating Environment Te m peratur e 50 ° F to 9 5 ° F ( 1 0 ° C to 3 5 ° C) Re lat iv e H u mid it y 20% to 80%.
B Connector Pi n A ssi gnments Seri al I nt erface Connect ors Parall el I nt erface Connector Power Supply (P rim ary) Keyboard and Mouse Connect ors Front P anel Dis k ett e Drive Interf ac e Connec.
B-2 Connec tor Pi n Assignm ents This appendix de scr ibes the syste m board conn ect o r pin assig nment s. The fo ll ow ing “Syste m Board Co nnecto r s” t abl e l ist s t he co nnector s and socket s o n the syste m b o ar d.
Connec tor Pin Assignments B-3 Syst em Board Expan sio n Slot , Mem ory, and I/O Conn ectors A – A GP Slot C onnecto r B – PC I Slo t Conne ctors C – Sh ared ISA /PC I Slo t Connect ors D – IS.
B-4 Connec tor Pi n Assignm ents System Board Internal Connectors Description Connector Nu mber CD-RO M Audio J2F 1 Au xi l i a r y Li n e- i n A u di o J 2 F 2 Tele phony J2F1 Fan 3 J3F2 Dis ke tte D.
Connec tor Pin Assignments B-5 Serial Int e rface Connector s P in assign me nt s for the ser ial inter face po rt connecto r s are li st ed in the fo llo w ing t a b le .
B-6 Connec tor Pi n Assignm ents Power S upply (Pr imary) Vo l t ages from the power supply are input to the sy ste m boar d t hro ugh t he pr imary po wer supp ly connecto r . The f o ll ow ing t abl e shows t he connecto r pin lo c a t io ns a nd p in a s s ig n me nt s.
Connec tor Pin Assignments B-7 Keyboard and M ouse Connectors The keyboard and mouse use st andard P S / 2 co nnectors. Pin assignme nt s ar e g ive n in t he fo llo w in g t a b l e .
B-8 Connec tor Pi n Assignm ents Diskette D rive Interf ace Connector The fo ll ow ing t able prov i de s t he p in assignme nt s for t he d i sket t e drive in t er f ac e co nn ect o r.
Connec tor Pin Assignments B-9 IDE Inte rface Connector All s ignal leve ls in the IDE interface are T T L com pat ibl e. A log ic 1 is a sig nal whose v o l t age l e vel is between 2.0 and 5.0 V. A log ic 0 i s a signal measur ing be t wee n 0.00 and 0.
B-10 Connec tor Pin Assignments DIMM Socket s The fo ll ow ing t able prov i de s t he DIMM so cket pin assig nme nt s. DIMM Sock et P in Assignments Pin Description Pi n Description Pin Descr iption .
Connec tor Pin Assignments B-1 1 DIMM Sock et P in Assignments Pin Description Pi n Description Pin Descr iption Pin Descri pt ion 31 NC 73 V DD 115 RAS 157 V DD 32 V SS 74 DQ28 116 V SS 158 DQ60 33 A.
B-12 Connec tor Pin Assignments AGP Connector Pin Assignments Pin Description Pi n Description Pin Descr iption Pin Descri pt ion A16 Vcc3 .3 B16 Vcc3 .3 A49 G r ound B49 G round A17 SBA3 B17 SBA0 A50 PAR B50 SERR# A18 Reserved B18 SB_STB A51 AD15 B5 1 C/BE1 # A19 Gr ound B1 9 Gr ound A52 Vc c3.
Connec tor Pin Assignments B-1 3 ISA Expansion Bus Conne ctors The expa nsio n sl o t si g na ls, vo l t ages, and gro unds are supp lied thro ugh the b us co nnecto r s. The f o ll ow ing t able pro vides the pin assig n ment s for t he IS A expansi o n bus.
B-14 Connec tor Pin Assignments ISA E xpansion Slot Pin Assignm ents Pin D irec tion S ign al Pin D irec tio n S igna l A28 Input/Outp ut SA3 B28 O utput BALE A29 Input/Output SA2 B29 Po wer +5V A3 0 .
Connec tor Pin Assignments B-1 5 PCI Expansion Bus Conne ctors The expa nsio n sl o t si g na ls, vo l t ages, and gro unds are supp lied thro ugh the b us co nnecto r s. The f o ll ow ing t able pro vides the pin assig n ment s for t he PCI expansi o n sl o t s.
B-16 Connec tor Pin Assignments PCI E xpa nsion Slot Pin Assignments Pin Si gnal Pi n Signal Pin Si gnal Pin Si gnal A29 AD20 B29 AD21 A60 REQ64C# B60 ACK64C # A30 Ground B30 AD19 A61 +5V B61 +5V A31 AD18 B31 +3.
C S y stem Resources IRQ Se tt in g s Syste m Re sour ce Info r m atio n Jum per S ett ings.
C-2 S y ste m Re sou rce s This sect i o n i ncludes inf o r mat i o n o n: system in terr upt request (IRQ) def aul t sett in g s viewing sys t e m reso ur ces jumper set t i ngs for t he syst e m b o ar d .
Syst em Res ou rces C-3 4. Do uble click Com puter . T he “Co mputer P ro pert i es” d ia log box appear s and d isplays t he “V iew Re so ur ces” fo lder. The “View Reso ur ces” fo l der s ho ws t he sy ste m resour ces used by y o ur co mputer.
C-4 S y ste m Re sou rce s Cle aring You r Pass word The fo ll ow ing describes how to clear y o ur s y st e m password ( s). 1. Tur n off t he po wer and un plug t he syste m and any per iphera ls. ! W A RNING Turn off t he system bef or e y ou change any j umper setti ngs.
Syst em Res ou rces C-5 Re co v e ring th e B I O S The fo ll o w ing descr ibes how to r eco ver the s y s te m BIOS. 1. Turn o ff t he power and un plug t he syste m and any per iphera ls. ! W A RNING Turn off t he system bef or e y ou change any j umper setti ngs.
Gloss ary 1 Glossary A access ti me The tim e period be tween t he supply of an acce ss signal an d the output o r acc e ptan ce of th e dat a by the add r e ssed sy ste m . Exam ple s are th e ac ce ss tim e s fo r DR AM s , SR AM s , ha r d dr i v es , a nd C D - R OM dr iv es .
2 Gloss ary AP M Ad va n c ed P o w er M a na ge me n t . An AP I d e v e l op e d b y I n t e l a nd M i c r os oft t ha t allow s develo p ers to in c lude powe r m ana geme nt in the BIOS. APM de f ines a laye r be tween the h a r dware and the ope ra ting sy stem th at effe ctively shield s the pro gram me r fro m hard w are de tail s.
Gloss ary 3 AV I A digital mov ie for m at created by Micro soft. AVI is sh ort f or “audi o/video i nt er l ea v e, ” a met h o d of i nc lu d in g a di g i t a l mo vi e a n d it s a c c o mp a n y i ng s ou n d i n the same f ile . File s in the AVI f orm at have the .
4 Gloss ary bit Bina r y d i git . T he s ma l l est u n it of c omp u t er da t a . A s ing l e d i git a l p i e c e of in for mati on , gene ra lly re presen t ed b y the n umeral 0 o r 1.
Gloss ary 5 boot sect o r T he p a r t of t h e b o ot b l oc k t ha t c o nt a i ns t h e op er a t i n g s ys t em l oa d er , a p r ogr a m t ha t starts by itsel f and lo ads the operating system . bps Bi ts per se cond. The n u mber o f bi ts of data th at can be tra nsm itte d in one s econd .
6 Gloss ary chassi s The me tal frame t o whi ch the electronic com p onents o f the com put er (such a s the sy st em boar d, powe r supply , a nd drive bay s) are attach ed.
Gloss ary 7 DIMM Dual I n line Memo r y Mod ule . Circui t bo ard wi th pin s conne cting to diffe r en t me mor y ch ip s o n b ot h s i des of t h e b oa r d, wh ic h a ll o ws f or wi der a nd f a s t er da t a transfe r (128-bi t). See SIMMs. DMA Dir e c t M e mor y Ac c ess .
8 Gloss ary EIDE Ex t e n d e d I nt egr a t ed Dr i v e E l e c t r o ni c s . T he E I D E s p ec if i c a t io n is a n e n ha nc e d ve rsion of IDE th at allow s for faste r transfe r rates an d supports la rge r hard d rive size s enha nce d VGA A vid eo in t e rface th at o ffe rs mo re colo rs o r h i g he r re so l ution th an V GA .
Gloss ary 9 H hertz ( Hz) A unit o f f requency eq ua l to one cycle p er se cond. hexad ecimal A numbe r system th at uses 16 as th e ba se. (Pl ace value indic at es powe r s of 16.) It use s the digits 0- 9 and A-F. Use d around com puters be caus e a by te (eight bi n ar y dig its) e asily conve rts to a tw o digit he xa decim al numb e r.
10 Glos sary IRQ I n te rrup t Req u e st. A sig n al th at, wh e n r ece ived b y t he CPU, m ake s i t s to p w h at i t i s going to do som ething else. An in t errupt is a w ay in wh ich a particul ar dev ice in a com put er com munic ates wi th the CPU.
Glos sary 11 micro pro cesso r A s emi conduc t or cen tral proce ssing unit th a t is the pr incipal com ponent o f a mic rocompute r. Usuall y contained on a single c hip that in cludes an arithm etic logic un it , cont r o l l o g ic , a nd c o nt r ol - memor y u nit .
12 Glos sary P page A type of me ssage tra nsmission in whic h a m essage is se nt or re ceive d via modem to a paging devi ce f r om a com puter (wi t h paging comm unication s softw a r e) o r tele p hone. paral l el interf ace I n t erf ace t h at c om muni cate s eig ht bi ts at a t im e .
Glos sary 13 printe r p ort Nam e assigned t o the par a lle l po r t by the Window s operating sy st em . A se cond paralle l devi ce is assig ned LP T 2 (if the r e is ano t her paralle l po rt). Al so called the prin t er port. pro cessor I n a com puter, a f unc tion al uni t th at in t erpre ts and e x ec utes in struction s.
14 Glos sary serial p rint er A pri n t e r wi t h a s e rial i nte rface . SGRA M Synchrono us Graphi c Random Access Mem o r y. A ty pe of DRAM use d i nc r ea s in g l y o n vi d e o a da p t er s a nd gr a p hic s a c c el er a t or s . L i k e S D R AM , S G R AM can syn c hronize its elf with the CPU bus cl ock at speed s of up to 100 MHz .
Glos sary 15 system bo ard Th e m ain printed ci rcuit bo a r d in s ide the sy stem unit in t o whi ch o ther bo ar ds and m ajor ch ip com ponen ts, such as the sy stem microproce ssor, are co n nect ed. T tpi Trac k s p e r in ch. track Any of m any concen tric circular re gions on a disk f or sto ring data.
16 Glos sary VRA M Video RA M. VRAM i s spe cial-purpo s e mem ory used by video adapters. Un like conven t ional RAM, V RA M can be accesse d by two different devi ces sim u ltan eo usl y . Th i s en able s a v ide o adap te r to acc es s th e V RA M fo r sc ree n upd ates at th e same time that th e CPU provide s new data.
Index-1 A Address e s I/O, 2-7 AGP ape rture si ze , 2-1 1 chi pset, 1- 6 connec tor pin assignme n ts, B-11 A WE64D PCI sound bo ar d, 1-10 B Batte r y CMOS, 1-7, 2-2 , 4-10 r emo va l, 4 - 1 0 Bee p.
Index-2 cabling , 3-14, 3-16 connec tion , 1-9, 1-10 in stalling, 3-17, 3-19, 3- 23 jum pe r setting s, 3-12 removing CD-ROM/DV D d rive, 3-18 seq uence, 2-14 support, 1-9, 1-10, 3- 11 E Ex p a ns i o.
Index-3 in stalling DIMMs, 3-11 m ap, 1-6 removing DIMMs, 3-10 sam ple c onfig uration s, 3-9 so ckets, 3-9 support, 3-8 upgrade , 3-8 Men u Advanced, 2-7 Boo t, 2-13 DMI Even t Logg ing sub men u, 2-.
Index-4 Re pai r disassem b ly, 5-2 S Second ar y IDE c onne ctor, 3-14 Se c uri ty Men u, 2-12 passwo rd cle ar ing , C-4 Se rial po rts, 1-9, 2-7 connec ting to, 3-26 connec tor pin assignme n ts, B.
Index-5 fan assem bly, 5-9 fron t panel, 5-4 powe r supply , 5-9 side pa nel, 5-5 stand ard 3 1/2-i nch h ar d d rive, 5-8 sy st em boar d, 5-10 T Tech nical suppo rt, 4-4 Tele p hone n u m b e rs te .
(F or U nit ed St ates U se On l y) Federal Comm unica tions Commission Rad i o Frequ en cy Int er fer en ce Statem ent WARNING: Change s o r modi fication s to thi s unit no t e xpr e ssly approved by the party re sponsi ble fo r com pliance could void the user’s auth o rity to o perate the equipme n t.
Bat tery Rep l acem ent A li thi um batte r y in some com put e rs m aintain s sy st em c onfig urat ion inform ation. In the even t th at the batte ry fai ls to m aintain system c onfig uration in formation , NEC recom me nds th at yo u r e place t he b a t t er y.
NEC C om put er S yst ems D i visi on P ackard B ell N EC , Inc . 1 P ack ar d B ell W ay Sa crame n to, CA 95 828- 0903 www. n ec-c ompu t ers.c om 102343S RV 4/99.
Ein wichtiger Punkt beim Kauf des Geräts NEC SP B-Series (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie NEC SP B-Series noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für NEC SP B-Series - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von NEC SP B-Series reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über NEC SP B-Series erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon NEC SP B-Series besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von NEC SP B-Series verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit NEC SP B-Series. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei NEC SP B-Series gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
