Benutzeranleitung / Produktwartung NDA-24298 des Produzenten NEC
Zur Seite of 1020
NDA-24298 ISSUE 1 STOCK # 200779 Offi ce Data Specif icat ion OCTOBER, 2000 NEC Ame rica, In c. ®.
LIAB ILITY DI SCLAI MER The informati on contained i n this document i s specific to D term Series E only. Throughout t his document, r eferences to “ Console” or “Atte ndant Console” imply a Hot el Console. Most feature s described i n this manual r equire a Hotel Console.
ISSUE 1 ISSUE 2 ISS UE 3 ISSUE 4 D A TE OCTOBER, 2000 D A TE D A TE DA TE ISSUE 5 ISSUE 6 ISS UE 7 ISSUE 8 DA T E DA T E DA T E DA T E NEAX24 00 IPX Office Data S pecification Revisi on Sheet 1/14 ND A-24298 PA G E N o .
ISSU E 1 ISSU E 2 ISSUE 3 ISSU E 4 D A TE OCTOBER, 2000 D A TE D A TE DA TE ISSU E 5 ISSU E 6 ISSUE 7 ISSU E 8 DA T E DA T E DA T E DA T E NEAX24 00 IPX Office Data S pecification Revi sion Sheet 2/14.
ISSU E 1 ISSU E 2 ISSUE 3 ISSU E 4 D A TE OCTOBER, 2000 D A TE D A TE DA TE ISSU E 5 ISSU E 6 ISSUE 7 ISSU E 8 DA T E DA T E DA T E DA T E NEAX24 00 IPX Office Data S pecification Revi sion Sheet 3/14.
ISSU E 1 ISSU E 2 ISSUE 3 ISSU E 4 D A TE OCTOBER, 2000 D A TE D A TE DA TE ISSU E 5 ISSU E 6 ISSUE 7 ISSU E 8 DA T E DA T E DA T E DA T E NEAX24 00 IPX Office Data S pecification Revi sion Sheet 4/14.
ISSU E 1 ISSU E 2 ISSUE 3 ISSU E 4 D A TE OCTOBER, 2000 D A TE D A TE DA TE ISSU E 5 ISSU E 6 ISSUE 7 ISSU E 8 DA T E DA T E DA T E DA T E NEAX24 00 IPX Office Data S pecification Revi sion Sheet 5/14.
ISSU E 1 ISSU E 2 ISSUE 3 ISSU E 4 D A TE OCTOBER, 2000 D A TE D A TE DA TE ISSU E 5 ISSU E 6 ISSUE 7 ISSU E 8 DA T E DA T E DA T E DA T E NEAX24 00 IPX Office Data S pecification Revi sion Sheet 6/14.
ISSU E 1 ISSU E 2 ISSUE 3 ISSU E 4 D A TE OCTOBER, 2000 D A TE D A TE DA TE ISSU E 5 ISSU E 6 ISSUE 7 ISSU E 8 DA T E DA T E DA T E DA T E NEAX24 00 IPX Office Data S pecification Revi sion Sheet 7/14.
ISSU E 1 ISSU E 2 ISSUE 3 ISSU E 4 D A TE OCTOBER, 2000 D A TE D A TE DA TE ISSU E 5 ISSU E 6 ISSUE 7 ISSU E 8 DA T E DA T E DA T E DA T E NEAX24 00 IPX Office Data S pecification Revi sion Sheet 8/14.
ISSU E 1 ISSU E 2 ISSUE 3 ISSU E 4 D A TE OCTOBER, 2000 D A TE D A TE DA TE ISSU E 5 ISSU E 6 ISSUE 7 ISSU E 8 DA T E DA T E DA T E DA T E NEAX24 00 IPX Office Data S pecification Revi sion Sheet 9/14.
ISSU E 1 ISSU E 2 ISSUE 3 ISSU E 4 D A TE OCTOBER, 2000 D A TE D A TE DA TE ISSU E 5 ISSU E 6 ISSUE 7 ISSU E 8 DA T E DA T E DA T E DA T E NEAX24 00 IPX Office Data S pecification Revi si on Sheet 10/.
ISSU E 1 ISSU E 2 ISSUE 3 ISSU E 4 D A TE OCTOBER, 2000 D A TE D A TE DA TE ISSU E 5 ISSU E 6 ISSUE 7 ISSU E 8 DA T E DA T E DA T E DA T E NEAX24 00 IPX Office Data S pecification Revi si on Sheet 11/.
ISSU E 1 ISSU E 2 ISSUE 3 ISSU E 4 D A TE OCTOBER, 2000 D A TE D A TE DA TE ISSU E 5 ISSU E 6 ISSUE 7 ISSU E 8 DA T E DA T E DA T E DA T E NEAX24 00 IPX Office Data S pecification Revi si on Sheet 12/.
ISSU E 1 ISSU E 2 ISSUE 3 ISSU E 4 D A TE OCTOBER, 2000 D A TE D A TE DA TE ISSU E 5 ISSU E 6 ISSUE 7 ISSU E 8 DA T E DA T E DA T E DA T E NEAX24 00 IPX Office Data S pecification Revi si on Sheet 13/.
ISSU E 1 ISSU E 2 ISSUE 3 ISSU E 4 D A TE OCTOBER, 2000 D A TE D A TE DA TE ISSU E 5 ISSU E 6 ISSUE 7 ISSU E 8 DA T E DA T E DA T E DA T E NEAX24 00 IPX Office Data S pecification Revi si on Sheet 14/14 ND A- 2429 8 971 1 972 1 973 1 974 1 975 1 976 1 977 1 978 1 979 1 980 1 981 1 982 1 983 1 984 1 985 1 986 1 PA G E N o .
NDA-2429 8 ISSUE 1 OCTOBER, 2000 NEAX2400 IPX Office Data Speci fication T ABLE OF CONTENTS Pa g e List of Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T ABLE OF CONTENTS ND A-24298 Pa g e ii Issue 1 T A BLE OF CONTENTS (CONTINUED) Pa g e CHAPTER 4 BUSINESS SYSTE M COMMAND DESC RIPTIONS AND DATA SHEETS . . . . . . . . . . . . . . 55 ATIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ND A-24298 T ABLE OF CONTEN TS P age iii Issue 1 T A BLE OF CONTENTS (CONTINUED) Pa g e AISP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 2 AISPL .
T ABLE OF CONTENTS ND A-24298 Pa g e iv Issue 1 T A BLE OF CONTENTS (CONTINUED) Pa g e AHLSN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 501 ADA1_T .
ND A-24298 T ABLE OF CONTEN TS Pag e v Issue 1 T A BLE OF CONTENTS (CONTINUED) Pa g e AUOG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 0 AUOGL .
T ABLE OF CONTENTS ND A-24298 Pa g e vi Issue 1 T A BLE OF CONTENTS (CONTINUED) Pa g e AARSN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 9 ALPE: .
ND A-24298 T ABLE OF CONTEN TS Pag e v i i Issue 1 T A BLE OF CONTENTS (CONTINUED) Pa g e APLNN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 964 ATDF .
LIST OF FIGURES Figure Title Pa g e LIST OF FI GURES ND A-24298 Pa g e vi i i Issu e 1 Figure 2-1 Serial/Dir ect Connect ion to IPX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Figure 2-2 Serial/Dia lup Connec tion to IPX .
ND A-242 98 LIST OF FIGURES P a ge ix Issue 1 LIST OF FIGURES (CONTINUED) Figure Title Pa g e Figure 4-1 8 Group Numb er of LENS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 571 Figure 4-1 9 ATRK for DTI (T1) .
LIST OF T ABLES T able Title Pa g e LIST OF T ABLES ND A- 242 98 Pa g e x Issu e 1 Table 2-1 PC Requirements t o Run IPX MAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Table 2-2 IPX MAT Comma nds . . . . .
ND-70186 (E) COMMAND LIST Pag e x i Issue 1 BUSINESS COMMAND LIST IN ALPHANUMERIC ORDER COMMAND NAME FULL COMMAND N AME P A GE AABD Assignment of Speed Cal ling Res t riction Data 408 AADC Assignment .
COMMAND LIST ND-70186 (E) Pag e x i i Issue 1 ACNDN Assignment of Calling Number Data for NDM 817 ACNP Assignmen t of Calling Num ber Pattern Data 811 ACNPN Assignment of Cal ling Number Pattern Data .
ND-70186 (E) COMMAND LIST P age xiii Issue 1 AEFR Assignment of EPN Facility Restriction 392 AEKD Assign ment of Exter nal K e y Data 772 AELGN Allocation of EX-FCCS T elepho ne Number Data for NDM 98.
COMMAND LIST ND-70186 (E) Pag e x i v Issue 1 AISP N Assignment of Incoming Selection Pattern for NDM 356 AITD Assignment of ISD N Terminal Data 851 AITD_T Assignme n t of ISD N Ter mi nal Data – Te.
ND-70186 (E) COMMAND LIST Pag e x v Issue 1 AOSPL Assignmen t of Outgoing Selection Pattern for LD M 291 AOSPN Assig nment of Outgoin g Selection Pattern for NDM 293 APA D Assignment of P AD Data 611 .
COMMAND LIST ND-70186 (E) P age xvi Issue 1 ASDT Assignment of Statio n Data 410 ASFC Assignment of Service Feature Rest riction Class 39 5 ASG D Assignment of Special Gro up Data 727 ASGD_T Assignmen.
ND-70186 (E) COMMAND LIST P age xvii Issue 1 ATDPL Assignment of T oll Code Res triction for LDM 37 6 ATDPN Assignment of T oll C ode Restriction for NDM 379 ATGL Assign ment of T runk Group B usy Lam.
COMMAND LIST ND-70186 (E) P age xviii Issue 1 This page is for yo ur no te s..
NDA-24298 CHAPTER 1 Page 1 Issue 1 CHAPTER 1 INTRODUCTION 1. General This manu al descri bes how to operat e the Mainten ance Admini strati on Terminal (MAT) and plan the off ice data. It also cont ains descript ions of the para meters for t he NEAX2400 I PX.
CHAPTER 1 NDA-24298 Page 2 Issu e 1 This page is for yo ur no te s..
NDA-24298 CHAPTER 2 Page 3 Issue 1 CHAPTER 2 ASSIGNMENT 1. General This chapter desc ribes the information neede d to install and operate the Maintenance Administration Ter minal (MAT ) softw are. The IP X MAT softwar e has the f ollowing f unctions : • Allo ws user -friendly Grap hical User Inte rf ace (GUI) with Microsof t W indo ws 95/NT .
CHAPTER 2 NDA-24298 Page 4 Issu e 1 ASSIGNMENT 2.2 IP X MA T and IPX Connection Figure 2-1 shows a serial/ direc t conn ectio n to the I OC card of IPX. The se rial/d irect connec tion al lo ws you to access the IPX and the dif ferent nodes via the Fusi on Link .
NDA-24298 CHAPTER 2 Page 5 Issue 1 ASSIGNMENT 2.3 Serial/Dialup Connection to IPX Figure 2-2 Serial/Dialup Connect ion to IPX The IPX MA T soft w are pr o vides an adv anced communicat ion softw are for IPX. IP X is m ain ta ined vi a th e LAN, W AN, or TCP/IP network on which it is r unning.
CHAPTER 2 NDA-24298 Page 6 Issu e 1 ASSIGNMENT Figure 2- 4 sho ws the config uration of the PBX and IPX MA T when connecting to an e xisting LAN. In most cases yo u should use a netw ork de vice such as a HUB or bridge to provide i s olat ion from e xcessi ve netw ork traffic.
NDA-24298 CHAPTER 2 Page 7 Issue 1 ASSIGNMENT 3. TCP/IP Considerati ons The IPX MAT c an c ommunicat e with the IP X via an Ethe rnet TCP/IP con nec tion.
CHAPTER 2 NDA-24298 Page 8 Issu e 1 ASSIGNMENT 4. Install ing IPX MA T Software The foll owing provi des ste p-by-step instruc tions for i nstall ing the I PX MAT software for Windows 95/NT onto your hard disk. 1. T erminat e all applicat ions, p rior to s tartin g the i nstalla tion proces s.
NDA-24298 CHAPTER 2 Page 9 Issue 1 ASSIGNMENT 4. Cl ick Ne xt on the Choose Destination Loc ation dialog box to install the IPX M AT software in the default direct ory .
CHAPTER 2 NDA-24298 Page 1 0 Issu e 1 ASSIGNMENT 6. Fi le copy starts au tomatical ly , whi le the dis played dia log box es (See Figure 2-9 ) sho w the on- going situa tion.
NDA-24298 CHAPTER 2 Page 11 Issue 1 ASSIGNMENT 7. I f the Setup Compl ete dialo g box appears on t he screen, t he fi le copies hav e finishe d successfu lly . Cl ick Finish to comp le te the IPX M A T sof tware ins t allati on and resta rt your co mpu te r .
CHAPTER 2 NDA-24298 Page 1 2 Issu e 1 ASSIGNMENT 8. Rev iew the se tt ings you have chosen, and then click Next . The Winsock2 Setup messa ge box disp la ys. Note: If you ar e insta lling IPX MA T on an NT 4.0 workstat ion, the W ins ock2 Setup messa ge box does not di splay .
NDA-24298 CHAPTER 2 Page 13 Issue 1 ASSIGNMENT 10. Click OK . The DAO Welco me Scre en d ispla ys. Figur e 2-13 D AO Welcome Sc reen 11. Click Next . The Select Components dialog box displays.
CHAPTER 2 NDA-24298 Page 1 4 Issu e 1 ASSIGNMENT 12. Unchec k the ODBCDirect box and clic k Next . The Select Components dia log box displays. Note: If you do not unc hec k the ODBCDir ect box , err or messag es display onc e the D A O Setup pr ogr am complete s.
NDA-24298 CHAPTER 2 Page 15 Issue 1 ASSIGNMENT 14. After t he DAO fil es ar e instal led, the DAO Informat ion mess age box di splays. C lick OK . The IPX MAT Instal lation s creen displays. Figure 2-17 DAO Information Me ssage 15. To run the I PX MAT softwar e, clic k t he IPX MAT icon on the des ktop or s el ect it fr om the Start/Pr ogr am menu.
CHAPTER 2 NDA-24298 Page 1 6 Issu e 1 ASSIGNMENT 16. To config ure the PBX Alias, use the instruc tions in Section 6.2, TCP/IP Conne ction . Note: Once you have conf igur ed the IPX MA T , y ou can use the Run Command line t o enter tas k commands, or you can sele ct the command fr om the Command F olde rs.
NDA-24298 CHAPTER 2 Page 17 Issue 1 ASSIGNMENT 5. IPX MA T Commands The IPX MAT’s operation is ver y similar to tha t of the NEAX2400 MS-DOS MAT, so you will find that many of the ke y strok e operati ons have been carried o ver into I PX MAT. In addit ion, some standard MS Wind ows operati ons and key s trokes are used.
CHAPTER 2 NDA-24298 Page 1 8 Issu e 1 ASSIGNMENT 6.1 Serial/Direct Connect ion The follo wing steps e xplain ho w to conf igure the PBX Alias fo r a seri al/dire ct connect ion using th e recomme nded def aul t dat a. Note 1: The PBX Ali as cannot have space s in th e name.
NDA-24298 CHAPTER 2 Page 19 Issue 1 ASSIGNMENT 1. From the PBX menu, sele ct Conf iguration to open the PBX Admin istration dia log box. Figure 2-20 PBX Administration 2.
CHAPTER 2 NDA-24298 Page 2 0 Issu e 1 ASSIGNMENT 12. Lea v e the IP Por t text box b lank. 13. Leave the In te r -A p p Resour ce text bo x blank . 14. Click Ad d to write t he dat a. 15. Click Clos e . Note: The PBX Admini str ation dial og box c hanges adapti ng to EX-FCCS Net work.
NDA-24298 CHAPTER 2 Page 21 Issue 1 ASSIGNMENT Note: If your IPX is t o r eside on yo ur e xisting LAN, you will need to obtain an availa ble IP add r ess fr om your System Admini stra tor befor e you con fi gur e the PBX Alias. 6.2.1 Modifying or Adding a PBX Alias Note: The PBX Alias cannot ha ve spaces i n its nam e.
CHAPTER 2 NDA-24298 Page 2 2 Issu e 1 ASSIGNMENT 6.2.3 Star ting the PBX System Before yo u can log in t o the PBX with your IPX MA T , you mus t start the PBX system.
NDA-24298 CHAPTER 2 Page 23 Issue 1 ASSIGNMENT 6.2. 5 Assign i ng S yst em Da ta This sect ion e xplains h o w to assi gn the IP Addre ss and the SubNet Mask using t he default IP Address 172.16. 253.0 and the defau lt SubNet Mas k 00.00.00.00. Both f ields mus t be ente red using thei r hex adecimal e qui v alent s.
CHAPTER 2 NDA-24298 Page 2 4 Issu e 1 ASSIGNMENT 16. T ype 516 in the INDEX text box and pre ss Enter . 17. T ype 10 (he xadecimal equi v alent of 16) i n the D A T A tex t box and p ress Ente r. 18. T ype Y in the WR T? te xt box and press Enter . 19.
NDA-24298 CHAPTER 2 Page 25 Issue 1 ASSIGNMENT 6.2.6 IPX M A T File Op era t i ons The IPX MA T create s three t ypes of f iles; Command Log fi les, Of f ice Dat a Backup f iles , and List- up Command Report data tables. Command Log f iles and Lis t-up Command Re port dat a tables are the onl y f iles a user needs to v ie w .
CHAPTER 2 NDA-24298 Page 2 6 Issu e 1 ASSIGNMENT 6.2.6.2 MEM_H DD The follo wing steps e xplai n ho w to perf orm the backu p and rest ore of PBX data to the PBX hard dri ve. 1. En ter MEM_H DD in th e Run Co m m a nd field on th e IPX MA T main menu.
NDA-24298 CHAPTER 2 Page 27 Issue 1 ASSIGNMENT 6.2.6.4 List-up Command Repor t Data T ables These data fi les are ta bles as sembled int o an MS-Access Dat abase format . The List-u p commands cre ate the data base and tabl es, popul ating the m based on th e informati on specif ied by the user .
CHAPTER 2 NDA-24298 Page 2 8 Issu e 1 ASSIGNMENT 6.2.6.7 Printing the Log Data File T o print t he log data f ile: 1. Display the log f ile in the File V ie wer windo w . 2. Select Print from the Fi le me nu. 6.2.6.8 Copying Data fr om the Log File T o copy data fr om the log f ile: 1.
NDA-24298 CHAPTER 2 Page 29 Issue 1 ASSIGNMENT 1. Local Node/Stand Alon e Figure 2-21 Local Node/Stand Alo ne Data Flow Assignment Flow Ch art (1/2) ATIM System Base ASYD ASYDL AUNT AIOC ASTD AOFC AMN.
CHAPTER 2 NDA-24298 Page 3 0 Issu e 1 ASSIGNMENT Figure 2-21 Local Node/Stand Alone Data As signment Flow Cha rt (2/2) Trunk ATRK MBTK AMAT ASAT ATGL AAKP ATRK MBTK Service CCIS No.
NDA-24298 CHAPTER 2 Page 31 Issue 1 ASSIGNMENT 2. Network Contro l Node Figure 2-22 Ne twork Control Node Data Assignment F low Chart (1/2) ATIM System Base ASYD ASYDL ASYDN AUNT AIOC ASTD AOFC AFMU A.
CHAPTER 2 NDA-24298 Page 3 2 Issu e 1 ASSIGNMENT Figure 2- 22 Network Contr ol Data Assignme nt Flow Char t (2/2) Trunk ATRK MBTK AMAT ASAT ATGL AAKP ATRK MBTK Service CCIS No.
NDA-24298 CHAPTER 3 Page 33 Issue 1 CHAPTER 3 OFFICE D A T A DESIGN SHEET Offic e data d es ign sh e ets ar e used to de sign t he confi gu rati o n and specifica tion of IPX. 1. T runking Diagr am The Trunki ng diagra m shows the syste m config uration and t he number of lines.
CHAPTER 3 NDA-24298 Page 3 4 Issu e 1 OFFICE DA T A D ESIGN SHEET Figure 3-1 T r unking Diagram PFT LC MDF DLC/ELC DLC DTL COT COT COT DID EMT DID TLT DTI RST MFCT DTI CCH MODEM DTI (PRI) DCH ATI RGU .
NDA-24298 CHAPTER 3 Page 35 Issue 1 OFFICE DA T A DESIGN SHEET Table 3- 1 iden tifies the fu n ction na me o f eac h circu it card us e d for the s yste m .
CHAPTER 3 NDA-24298 Page 3 6 Issu e 1 OFFICE DA T A D ESIGN SHEET Fig u r e 3-2 Card Mounti n g Sl o t 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 PA-PW55-A (PWR0) PA-PW54-.
NDA-24298 CHAPTER 3 Page 37 Issue 1 OFFICE DA T A DESIGN SHEET Figure 3 -3 Card Moun ting Slot for 4-IMG System (1/4) 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 PA-PW55-A(.
CHAPTER 3 NDA-24298 Page 3 8 Issu e 1 OFFICE DA T A D ESIGN SHEET Figure 3 -3 Card Moun ting Slot for 4-IMG System (2/4) 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 PA-PW55.
NDA-24298 CHAPTER 3 Page 39 Issue 1 OFFICE DA T A DESIGN SHEET Figure 3 -3 Card Moun ting Slot for 4-IMG System (3/4) 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 PA-PW55-A(.
CHAPTER 3 NDA-24298 Page 4 0 Issu e 1 OFFICE DA T A D ESIGN SHEET Figure 3 -3 Card Moun ting Slot for 4-IMG System (4/4) 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 PA-PW55.
NDA-24298 CHAPTER 3 Page 41 Issue 1 OFFICE DA T A DESIGN SHEET Figur e 3-4 Card Mou nting Slot for IPX-U S ystem (1/5) PWR1 (PH-PW14) PWR0 (PH-PW14) HSW00 (PU-SW01)(RES) HSW01 (PU-SW01) HSW10 (PU-SW01.
CHAPTER 3 NDA-24298 Page 4 2 Issu e 1 OFFICE DA T A D ESIGN SHEET Figur e 3-4 Card Mou nting Slot for IPX-U S ystem (2/5) PA-PW55- A (PW R0) PA - PW 54-A (PW R1) P H -P C 3 6 (M UX ) P H -P C 3 6 (M U.
NDA-24298 CHAPTER 3 Page 43 Issue 1 OFFICE DA T A DESIGN SHEET Figur e 3-4 Card Mou nting Slot for IPX-U S ystem (3/5) PA-PW55-A (PWR0) PA-PW54-A (PWR1) PH-PC36 (MUX) PH-PC36 (MUX) PH-PC36 (MUX) PH-PC.
CHAPTER 3 NDA-24298 Page 4 4 Issu e 1 OFFICE DA T A D ESIGN SHEET Figur e 3-4 Card Mou nting Slot for IPX-U S ystem (4/5) PA-PW55-A(PWR0) PA-PW54-A(PWR1) PH-PC36(MUX) PH-PC36(MUX) PH-PC36( MUX) PH-PC3.
NDA-24298 CHAPTER 3 Page 45 Issue 1 OFFICE DA T A DESIGN SHEET Figur e 3-4 Card Mou nting Slot for IPX-U S ystem (5/5) PA-PW55-A(PWR0) PA-PW54-A(PWR1) PH-PC36( MUX) PH-PC36( MUX) PH-PC36(MUX) PH-PC36(.
CHAPTER 3 NDA-24298 Page 4 6 Issu e 1 OFFICE DA T A D ESIGN SHEET Figure 3-5 Port Locati on Table (1/2) 09 11 13 15 17 19 21 23 7 6 5 4 3 2 1 0 LV G 01 03 05 31 09 11 13 15 17 19 21 23 7 6 5 4 3 2 1 0 LV G 00 02 04 28 30 10 12 14 16 18 20 22 PIM SLOT C A R D Access Code CIC for CCIS/DC for C.
NDA-24298 CHAPTER 3 Page 47 Issue 1 OFFICE DA T A DESIGN SHEET Figure 3-5 Port Locati on Table (2/2) 7 6 5 4 3 2 1 0 01 03 05 07 09 11 13 15 17 19 21 23 7 6 5 4 3 2 1 0 LV G 00 02 04 06 08 10 12 14 16.
CHAPTER 3 NDA-24298 Page 4 8 Issu e 1 OFFICE DA T A D ESIGN SHEET 6. Numbering Plan T able A CCE SS NUM BE R FUNCTION NAME REMARKS.
NDA-24298 CHAPTER 3 Page 49 Issue 1 OFFICE DA T A DESIGN SHEET 1. Service Featur e Restr i ction Class T able 3-2 Ser v ice Feat ure Rest ri ctio n Clas s 012345 6789 1 0 1 1 1 2 1 3 1 4 1 5 Account C.
CHAPTER 3 NDA-24298 Page 5 0 Issu e 1 OFFICE DA T A D ESIGN SHEET Line Load Cont rol Meet-Me Pag ing Message Reminder ( D te rm) Message W aiting Lamp Setting from A TTCON or Station (Called Party) Me.
NDA-24298 CHAPTER 3 Page 51 Issue 1 OFFICE DA T A DESIGN SHEET 2. T runk Restr iction Clas s T able DESTINA T ION [A CCESS NUMBER] RT No. No. OF TRK RO UT E RESTRICTION INDEX RESTRICTION CLASS NUMBER .
CHAPTER 3 NDA-24298 Page 5 2 Issu e 1 OFFICE DA T A D ESIGN SHEET 3. T enant Res triction T able 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 123456789 1 0 1 1 1 2 1 3 1 4 1 5 (TMTN) (OGTN) Station-to-Station Call 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 123456789 1 0 1 1 1 2 1 3 1 4 1 5 (TMTN) (OGTN) Assignment of C.
NDA-24298 CHAPTER 3 Page 53 Issue 1 OFFICE DA T A DESIGN SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 123456789 1 0 1 1 1 2 1 3 1 4 1 5 (TMTN) (OGTN) Incoming Connection to Attendant Console 1 2 3 4 5 6 .
CHAPTER 3 NDA-24298 Page 5 4 Issu e 1 This page is for yo ur no te s..
NDA-24298 CHAPTER 4 Page 55 Issue 1 CHAPTER 4 BUSINESS SYSTEM COMMAND DESCRIPTIONS AND DATA SHEETS This cha p ter e x pl a ins th e pa ram e ter s f o r t he Bu s in ess Sy st em co mm and s of th e NE A X2 4 00 I PX . A da ta sh eet is pro vided for each command.
CHAPTER 4 NDA-24298 Page 5 6 Issu e 1 BUSINESS SYSTEM COMMAND DESCRIPTIONS AND D A T A S H E E T S Figu re 4- 1 Comma nd D escri ptio ns Command name The assigned data dump into the designated file by the list up command shown here. Command name (full name) The purpose of the command and its service features are explained here.
NDA-24298 CHAPTER 4 Page 57 Issue 1 A TIM : Ass ignment of Date and T i me ATIM: Assignment of Date and Time 1. General This comma nd sets the cl ock inf ormation for the system. Cl ock info rmation is ex ecuted when Y is entered in the WR T ? field an d th e En te r ke y press ed.
CHAPTER 4 NDA-24298 Page 5 8 Issu e 1 A TIMN : Assignment of Date and Time for NDM ATIMN: Assignment of D ate and Time f or NDM 1. General This comma nd s ets the clock i nforma ti on fo r al l syst ems with in the Fu si on ne twork.
NDA-24298 CHAPTER 4 Page 59 Issue 1 A TIMN : Assignment of Dat e and Time for NDM 3. Data Entry Instructi ons YEAR Enter th e 4 digits of the yea r. (For example: 1999 or 2000) D A TE TIM E YEAR MONTH D A Y HOUR MINUTE SECOND DA Y Enter the di gits with a ra nge from 1 to 3 1.
CHAPTER 4 NDA-24298 Page 6 0 Issu e 1 ASYD : As sig n m ent of Syst em Da ta ASYD: Assignment of System Data 1. General The ASYD/ASYDL comma nd assigns the sy stem data f or th e following node : • Local Node (L/N)/Net work Control Node (NCN) of the Fusion netwo rk.
NDA-24298 CHAPTER 4 Page 61 Issue 1 ASYD : Assignment o f System Data 3. Data Entry Instructi ons Define each bit's corresponding data referring to the SYSTEM DATA CONTENTS SYSTEM DATA TYPE (SYS).
CHAPTER 4 NDA-24298 Page 6 2 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 4. Data Sheet SYST EM DATA TYPE (SYS) SYST EM DATA INDEX (INDEX) 0 – 511 DATA (DATA) 00 – FF (Hex) BIT CORRESPONDING DA.
NDA-24298 CHAPTER 4 Page 63 Issue 1 ASYD : Assignment o f System Data 14 b 0 Contro l of OR T all Busy Status 0/1 = R O T/Queue b 1 Recalling m ethod when the caller has released with Emer gency Call .
CHAPTER 4 NDA-24298 Page 6 4 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 5 b 0 Access Code for C.F .-Busy Line a nd C.F. – Don ’ t Answer Services 0/1 = Same/Separate Note: If “ 0 ” is a ssigne d, assi gn eith er SID: 10 or 12 i n command ASPA.
NDA-24298 CHAPTER 4 Page 65 Issue 1 ASYD : Assignment o f System Data SYS1, INDEX 6, b 4 ~ b 6 : Note: Can change the key Function using the AAKP command.
CHAPTER 4 NDA-24298 Page 6 6 Issu e 1 ASYD : As sig n m ent of Syst em Da ta (b) Add-on Conso le K e y pattern 3. Desk Console ( Business) K e y patter n for Hotel appl ication system (a) Add -on Cons.
NDA-24298 CHAPTER 4 Page 67 Issue 1 ASYD : Assignment o f System Data SYSTE M DA TA TYPE (SYS) SYSTEM DA T A INDEX (INDEX) 0 – 511 DA T A (D A T A) 00 – FF (Hex) BIT CORRESPONDING DA T A SYSTEM D .
CHAPTER 4 NDA-24298 Page 6 8 Issu e 1 ASYD : As sig n m ent of Syst em Da ta Note 1: Composition of Authorization Co de, and its relation to C heck Sum (related to INDEX 12~14). Authorization Co de consists of D0 D 1 D2 D3 D4 D5 D6 . (When using Che ck Sum, a maximum of seven digits, including C heck Digits, are available.
NDA-24298 CHAPTER 4 Page 69 Issue 1 ASYD : Assignment o f System Data SYSTE M DATA TYPE (SYS) SYSTEM DATA INDEX (INDEX) 0 – 511 DATA (DATA) 00 – FF (Hex) BIT CORRESPONDING DATA SYSTEM DATA CONTE N.
CHAPTER 4 NDA-24298 Page 7 0 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 16 b 0 1-di git S tatio n Num ber 0/1 = Out /In Service b 1 2-di git S tatio n Num ber 0/1 = Out /In Service b 2 3-di git.
NDA-24298 CHAPTER 4 Page 71 Issue 1 ASYD : Assignment o f System Data 1 18 b 0 Not use d b 1 b 2 b 3 b 4 b 5 b 6 Day/Night change of Satell ite Off ice (for CCIS) 0/1 = Out /In Service b 7 Day/Night c.
CHAPTER 4 NDA-24298 Page 7 2 Issu e 1 ASYD : As sig n m ent of Syst em Da ta Note: When “ 1 ” has been as signed to b 7 , the station number o f Station A (Called Party), as shown below, is p rovided to the SMDS equipment.
NDA-24298 CHAPTER 4 Page 73 Issue 1 ASYD : Assignment o f System Data SYSTE M DATA TYPE (SYS) SYSTEM DATA INDEX (INDEX) 0 – 511 DATA (DATA) 00 – FF (Hex) BIT CORRESPONDING DATA SYSTEM DATA CONTE N.
CHAPTER 4 NDA-24298 Page 7 4 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 29 b 0 Message Center Interf ace Output Designation “ 1 ” is to be assigned to each bit correspon ding to the Port Number of the IOC Cir c u it Card .
NDA-24298 CHAPTER 4 Page 75 Issue 1 ASYD : Assignment o f System Data 13 3 0b 0 Not use d 0b 1 0b 2 b 3 T elephone Subject to Total Billing (whe n b6 = 1) 0 0 = T elephone that called f irst 0 1 = T elephone that called last. 1 0 = First telephone after the c all has be en h a ndled by AT T .
CHAPTER 4 NDA-24298 Page 7 6 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 13 4 b 0 SMDR RS-232 C Output 0/1 = Out /In Service b 1 RS-23 2C Out put C od e (SMD R) (When b 0 = 1: SM DR) b 2 b 1 0 0 =.
NDA-24298 CHAPTER 4 Page 77 Issue 1 ASYD : Assignment o f System Data SYSTE M DATA TYPE (SYS) SYSTEM DATA INDEX (INDEX) 0 – 511 DATA (DATA) 00 – FF (Hex) BIT CORRESPONDING DATA SYSTEM DATA CONTE N.
CHAPTER 4 NDA-24298 Page 7 8 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 40 00 b 0 ~ b 4 No t us ed b 5 SMDR Buffer Ov er flo w Alarm 0/1 = F ault @ 80%, Clear @ 50% /Use Inde xes 249 an d 250.
NDA-24298 CHAPTER 4 Page 79 Issue 1 ASYD : Assignment o f System Data 1 43 b 0 For Remote Access to System, is F orced Account (F/A) Code Dialing requ ired upon recei ving RBT? 0/1 = Requ ired/Not Req.
CHAPTER 4 NDA-24298 Page 8 0 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 45 Abnormal C all, Short Duration T imer fo r Automatic Ci rcuit Assurance service (when INDEX = 44, b 0 = 1) T imer count er (TC ) is to be a ssign ed a value from 02 Hex to FF Hex.
NDA-24298 CHAPTER 4 Page 81 Issue 1 ASYD : Assignment o f System Data Note: When assign ing data fo r INDEXes 56 a nd 57, be su r e to ass ign data in suc h a way that t he data value of INDEX 56 is l ar g er than INDEX 57 (V alue of INDEX 56>V alue of INDEX57 ).
CHAPTER 4 NDA-24298 Page 8 2 Issu e 1 ASYD : As sig n m ent of Syst em Da ta SYST EM DATA TYPE (SYS) SYSTEM DATA INDEX (INDEX) 0 – 511 DATA (DATA) 00 – FF (Hex) BIT CORRESPONDING DATA SYSTEM DATA CONTE NTS DATA 0/1 BIT 1 58 b 0 Conf igurati on of CP U (for IPX) 0/1 = Si ngle/Du al For IPX, assig n “ 0.
NDA-24298 CHAPTER 4 Page 83 Issue 1 ASYD : Assignment o f System Data 1 60 0b 0 Not used 0b 1 0b 2 b 3 UCD Queu ing 0/1 = R equired (RBT) /Not Req uired (BT) (Most = 0 wh en the MCI is in s ervice.
CHAPTER 4 NDA-24298 Page 8 4 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 62 0b 0 Not used 0b 1 0b 2 0b 3 0b 4 0b 5 b 6 AC T / S T – BY Change o ver at R outine Diagnosis 00= E v e r y t i m e .
NDA-24298 CHAPTER 4 Page 85 Issue 1 ASYD : Assignment o f System Data 1 64 b 0 µ la w/A law for TDSW 0 = µ law (Japan, North America, Canad a, and Hong K ong) 1 = A l aw ( Europe, other nati ons) b .
CHAPTER 4 NDA-24298 Page 8 6 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 67 00 0b 0 Not used 0b 1 0b 2 0b 3 0b 4 0b 5 0b 6 SMDR Control Ci rcuit Card Desig nation 0/1 = MRC/SMDC (Al ways assign “ 0. ” ) 0b 7 SMDR Sendi ng Des ignati on 0/1 = AP /SMDC (Al ways assign “ 0.
NDA-24298 CHAPTER 4 Page 87 Issue 1 ASYD : Assignment o f System Data 16 9 b 0 Return tr ansfer red c all to tr ansfe rring party after Recal l Timer exp ires (Call T ransfer – All Calls or Blind Transfer to Station servi ce) 0/1 = Rec a ll/N o R e call, or execution of Cal l Forwar ding – Don ’ t Ans w er (w hen C.
CHAPTER 4 NDA-24298 Page 8 8 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 70 b 0 Call ed Number Di splay wh en forwardi ng to Att endant C onsole 0/1 = Ou t/In Servic e b 1 Flas hing di sp lay of Line Locko ut on At ten dan t Con so le BLF 0/1 = I n Service/Out b 2 Rou te No.
NDA-24298 CHAPTER 4 Page 89 Issue 1 ASYD : Assignment o f System Data 1 72 0b 0 Not used 0b 1 0b 2 0b 3 0b 4 0b 5 b 6 Distin cti ve Ringing (DR) onl y for Dir ect-In T ermination (DIT), Direct-In Dial ing (DID) calls Note: Assi gn “ 0 ” or “ 1 ” accordin g to Table 4- 2 .
CHAPTER 4 NDA-24298 Page 9 0 Issu e 1 ASYD : As sig n m ent of Syst em Da ta b 6 01 Parameter DR assigned via command “ARTD” 0101 Direct-In T ermination (DIT) Ringer Pattern 1 Ringer Pattern 0 R i.
NDA-24298 CHAPTER 4 Page 91 Issue 1 ASYD : Assignment o f System Data 17 5 b 0 Route Re stric tion Cl ass Dat a (ARSC command) 0/1 = Common/Sep a rate T abl e Dev elopment: Com mon o r Separ ate Day/Night Data T a- bles. Note: When d ata tables ar e designa ted as “ Common, ” the Day mode designa tion must be used in the respective commands.
CHAPTER 4 NDA-24298 Page 9 2 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 76 0b 0 Not used 0b 1 Same Special Access Code Data (ASPS com mand) 0/1 = Common/Sep a rate T abl e Dev elopment: Com mon o r Separ ate Day/Night Data T a- bles.
NDA-24298 CHAPTER 4 Page 93 Issue 1 ASYD : Assignment o f System Data 1 78 1b 0 Display Statio n numbers on the Attendan t Console and stat ions 0/1 = Out/In Service (Al way s assign “ 1.") 1b 1 Kind of Service Class indication ( D term ) 0/1 = Out/In Service (Al way s assign “ 1.
CHAPTER 4 NDA-24298 Page 9 4 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 80 0b 0 Not used b 1 Call Block Service - K ey used for canceling the Rejection Number 0/1 = # key/ * k ey 0b 2 Clear last input from LCD when i n OAI Mode 0/1 = Y es/No 0b 3 Display static A CD messages (B reak, Ready , etc.
NDA-24298 CHAPTER 4 Page 95 Issue 1 ASYD : Assignment o f System Data 1 84 FF 1b 0 Data Memory Segment Location Designation 1b 1 1b 2 1b 3 1b 4 1b 5 1b 6 1b 7 85 FF 1b 0 1b 1 1b 2 1b 3 1b 4 1b 5 1b 6 .
CHAPTER 4 NDA-24298 Page 9 6 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 18 6 b 0 System Message “ 7-0 ” is reg istered when no errors are detected by the Routi ne Diagno sis Program (R efer t.
NDA-24298 CHAPTER 4 Page 97 Issue 1 ASYD : Assignment o f System Data 1 87 Hour data is assigned using a decimal number (Military T ime) Example: 2: 00 a.
CHAPTER 4 NDA-24298 Page 9 8 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 90 b 0 Not used b 1 Backup Call F orwar di ng and Ind i vidual Speed Data to HDD (See Inde x 30 4) 0/1 = No/Y es b 2 Not .
NDA-24298 CHAPTER 4 Page 99 Issue 1 ASYD : Assignment o f System Data 1 92 b 0 System Da ta- 2 (ASYD command) Separate or Commo n T enant Data table de- velopment for the re- specti ve com mands 0/1 = Separate/Co m- mon Note: When d ata “ 1 ” is assig ned, data mus t be assig ned fo r Tenant 1 (TN = 1) i n the respective commands.
CHAPTER 4 NDA-24298 Page 100 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 94 b 0 T ena nt Re strict ion Cl ass Da ta (A TNR command) Separat e or Commo n T enant Data table de- velopment for the .
NDA-24298 CHAPTER 4 Page 101 Issue 1 ASYD : Assignment o f System Data 1 96 End User ’ s Off ice Name (INDEX 96-115) Note 1: The End User ’ s Office Nam e must be less than 20 characters . Note 2: A blank is as signed a s data “ 20 He x ” . Example: I f the End User ’ s Office Name is “ NEC CORP.
CHAPTER 4 NDA-24298 Page 102 Issu e 1 ASYD : As sig n m ent of Syst em Da ta Note 1: When sett ing t he dat a tha t des ignate s Print/Mess a ge Center and MA T , be sur e the dat a is not d uplic ated i n the P ort number data to be assigne d by SYS-1, INDEX 288, 290, 292, and 294.
NDA-24298 CHAPTER 4 Page 103 Issue 1 ASYD : Assignment o f System Data Note 1: When setting the data that designates Print/Messag e Center and MAT, be sure the data is n ot duplicated in the Port number da ta assi gned by SY S-1, INDEX 2 88, 29 0, 292, an d 294.
CHAPTER 4 NDA-24298 Page 104 Issu e 1 ASYD : As sig n m ent of Syst em Da ta Note 1: W hen setting the data that designates Print /Mes sage Center and MAT, be sure th e data is not duplicated in the Port number da ta assi gned by SY S-1, INDEX 2 88, 29 0, 292, an d 294.
NDA-24298 CHAPTER 4 Page 105 Issue 1 ASYD : Assignment o f System Data Note: When activat ing the Passw ord function , assig n “ b 7 = 1 ” ONLY after a Password Code has b een assigned vi a com- mand AP SW. Note: When activating the Password function, assign “ b 7 = 1 ” O NLY aft er a Passw ord Code has been assign ed via command APSW.
CHAPTER 4 NDA-24298 Page 106 Issu e 1 ASYD : As sig n m ent of Syst em Da ta SYST EM DA TA TYPE (SYS) SYSTEM DA T A IND EX (INDEX) 0 - 511 DA T A (D A T A ) 00 - FF (Hex) BIT CORRESPONDING DA T A SYST.
NDA-24298 CHAPTER 4 Page 107 Issue 1 ASYD : Assignment o f System Data 1 126 b 0 External E quipment Alarm T imer (0-127): If external equipment co ntinues to send alar m information for the duration ov er this timer value, the system will regard it as a failure.
CHAPTER 4 NDA-24298 Page 108 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 129 b 0 Register Inter Digit T imer: Miscella neou s T imer Counter (MTC) is to be assigned a value from 0 H ex to F Hex (0- 15). The interv al between dialed digits . T i mer V al ue Setting is MTC × 2 sec.
NDA-24298 CHAPTER 4 Page 109 Issue 1 ASYD : Assignment o f System Data 1 131 0 b 0 Not used For 2n d DT trunks, the sender waits until this t imer expi res before sending di al ed digits . T i mer V al ue Setting is MTC × 512 msec. Note: When this data i s 00 Hex, the followi ng default data is automatically set: DP=2.
CHAPTER 4 NDA-24298 Page 110 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 133 0 b 0 Not used The interv al between dialed digits T i mer V al ue Setting is 60 msec./120 msec. + MTC × 512 msec. Note 1: When this data i s 00 Hex, timer value is 60 msec/120 msec.
NDA-24298 CHAPTER 4 Page 111 Issue 1 ASYD : Assignment o f System Data 1 135 b 0 Seizure Guard T imer: Miscella neou s T imer Counter (MTC) is to be assigned a value from 0 H ex to F Hex (0- 15). After a trunk is seized, it cannot be dialed un til this timer expires.
CHAPTER 4 NDA-24298 Page 112 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 11 3 7 b 0 Start T imer for Periodic Indication Tone: Miscella neous T imer Counter (MT C) is assign ed a value from 0 Hex to F H ex (0- 15). This timer specifies the point in a con versation at which the f irst Periodic Indication T o ne is to b e sent.
NDA-24298 CHAPTER 4 Page 113 Issue 1 ASYD : Assignment o f System Data 11 3 8 b 0 Perio dic Indicati on T one Interv al T imer: Miscella neou s T imer Counter (MTC) is to be assigned a value from 0 H ex to F Hex (0- 15). This time r assi gns the interval between Periodic Indication T ones, after the f irst tone h as bee n s ent.
CHAPTER 4 NDA-24298 Page 114 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 139 b 0 No Answer T imer : Miscella neou s T imer Counter (MTC) is to be assigned a value from 0 H ex to F Hex (0- 15). No Answer T imer for Statio n to Station, D ID, and T ie Line calls.
NDA-24298 CHAPTER 4 Page 115 Issue 1 ASYD : Assignment o f System Data 1 141 b 0 No Answer Timer for Station Call from AT T : Miscella neou s T imer Counter (MTC) is to be assigned a value from 0 H ex to F Hex (0- 15). This timer app lies to stations f or which C.
CHAPTER 4 NDA-24298 Page 116 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 144 b 0 Automatic Hold R ecall T imer for D term : Miscella neou s T imer Counter (MTC) is to be assigned a value from 0 H ex to F Hex (0- 15). This timer is u sed for Exclusi ve Hold and Non-Exclus i ve Hold.
NDA-24298 CHAPTER 4 Page 117 Issue 1 ASYD : Assignment o f System Data 1 146 b 0 Ho wler T one Timer: Miscella neou s T imer Counter (MTC) is to be assigned a value from 0 H ex to F Hex (0- 15). This time r assi gns the duration between tones when Ho wler T one is being sent to a station.
CHAPTER 4 NDA-24298 Page 118 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 149 b 0 Camp-On Recall T imer for CAS -Satellite Station: Miscella neou s T imer Counter (MTC) is to be assigned a value from 0 H ex to F Hex (0- 15).
NDA-24298 CHAPTER 4 Page 119 Issue 1 ASYD : Assignment o f System Data 1 151 b 0 SHF length for a CAS Main Station: Miscella neou s T imer Counter (MTC) is to be assigned a v alue from 00 Hex to 1F Hex (0- 31). The length of an SHF si gnal bei ng sent from the Main to a Satellit e PBX.
CHAPTER 4 NDA-24298 Page 120 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 153 b 0 Data Communication RS-2 32C RS-CS Signal Control service: This timer is to be assigned a value fr om 0 He x to F He x (0-1 5) 0 He x = 60 msec. 1-7 Hex = – 8 He x = 0 msec.
NDA-24298 CHAPTER 4 Page 121 Issue 1 ASYD : Assignment o f System Data 1 156 b 0 T runk Soft Hold T imer A: Miscellaneous T imer Cou nter (MTC ) is to be assigned a value from 0 H ex to F Hex (0- 15). T i mer V alue Settin g is MTC × TC sec. Note: When this data i s 00 Hex, default data is automatically set to 30 se c .
CHAPTER 4 NDA-24298 Page 122 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 158 b 0 Attend ant Cons ole Busy V erif ication W arning T one T imer: Miscellaneous T imer Cou nter (MTC ) is to be assigned a value from 0 H ex to F Hex (0- 15). The interv al between BV to nes.
NDA-24298 CHAPTER 4 Page 123 Issue 1 ASYD : Assignment o f System Data 11 6 0 1b 0 Hotel Feature required (Fixed Data) (for Hotel s ystem) 1b 1 Hotel Service kind (Fixed Data) b 2 Lengt h of Room Statu s Memory 0/1 = 8 byte/2 4 byte 0b 3 P attern of Ke y Arrangement on Attendant Cons ole (Refer to Table 4-1 .
CHAPTER 4 NDA-24298 Page 124 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 11 6 1 b 0 Don ’ t Distur b Overri de ke y on the Attend ant Cons ole 0/1 = Ou t/In Servic e (for Hotel system) b 1 Messa.
NDA-24298 CHAPTER 4 Page 125 Issue 1 ASYD : Assignment o f System Data T able 4-1 K ey Arrangements f or Hotel Add-On Console DA T A KE Y ARRANGEMENT REMARKS b 4 b 3 00 WUS: W ake -Up Set WUR: W ake-U.
CHAPTER 4 NDA-24298 Page 126 Issu e 1 ASYD : As sig n m ent of Syst em Da ta SYSTE M DA TA TYPE (SYS) SYSTEM DA T A INDEX (INDEX) 0 - 511 DA T A (D A T A) 00 - FF (Hex.) BIT CORRESPONDING DA T A SYSTEM D A T A CONTE NTS DA TAe a 0/1 BIT 1 162 0 b 0 Assign 00 for b usines s syste ms.
NDA-24298 CHAPTER 4 Page 127 Issue 1 ASYD : Assignment o f System Data 1 166 00 0 b 0 Assign 00 for b usines s syste ms. 0 b 1 0 b 2 0 b 3 0 b 4 0 b 5 0 b 6 0 b 7 167 00 0 b 0 b 1 b 2 b 3 b 4 b 5 b 6 b 7 SYSTE M DA TA TYPE (SYS) SYSTEM DA T A INDEX (INDEX) 0 - 511 DA T A (D A T A) 00 - FF (Hex.
CHAPTER 4 NDA-24298 Page 128 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 168 0 b 0 Assign 00 for b usines s syste ms. 0 b 1 0 b 2 Not use d 0 b 3 b 4 Of f-hook Al arm (service) 0/1 = Out /In Ser.
NDA-24298 CHAPTER 4 Page 129 Issue 1 ASYD : Assignment o f System Data 1 171 00 b 0 Assign 00 for b usines s syste ms. b 1 b 2 b 3 b 4 b 5 b 6 b 7 172 00 b 0 b 1 b 3 b 4 b 5 b 6 0 b 7 173 00 b 0 b 1 b 2 b 3 b 4 b 5 b 6 b 7 174 00 No t us ed 175 00 0 b 0 Assign 00 for b usines s syste ms.
CHAPTER 4 NDA-24298 Page 130 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 176 00 0 b 0 Assign 00 for b usines s syste ms. 0 b 1 0 b 2 0 b 3 Not use d 0 b 4 0 b 5 0 b 6 0 b 7 Not use d 177 00 0 b .
NDA-24298 CHAPTER 4 Page 131 Issue 1 ASYD : Assignment o f System Data 1 180 b 0 1 b 1 2 b 2 4 b 3 8 b 4 16 b 5 32 b 6 64 b 7 128 181 b 0 256 Note: OP C val ue is expressed by all bi ts. F o r example, if OPC value is 16, bit values ar e entered as shown bel ow .
CHAPTER 4 NDA-24298 Page 132 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 184 b 0 1 Note: DPC1 value is expressed using all 14 bits. For example, if DPC1 value is 10, bit va lues are ente re d as shown below. Enter the data into the D A T A co lumn in hexadecimal numbers.
NDA-24298 CHAPTER 4 Page 133 Issue 1 ASYD : Assignment o f System Data SYST EM DA T A TYPE (SYS) SYSTEM DA TA INDEX (INDEX) 0 - 511 DA TA (D A T A) 00 - FF (He x) BIT CORRESPONDING DA TA SYSTEM DA T A.
CHAPTER 4 NDA-24298 Page 134 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 188 b 0 No. 7 CC IS Control Syst em Inter of f ice Audit T est 0/1 = Requ ired/N ot R equir ed Note 1: This system data becomes valid only when activating TRK Ineffective Hold Check function of the periodic test.
NDA-24298 CHAPTER 4 Page 135 Issue 1 ASYD : Assignment o f System Data 1 190 b 0 I/O = Port design ation to Host Comp uter AT T 0 P o r t (for Hote l system) b 1 b 2 0 b 3 Not used 0 b 4 0 b 5 0 b 6 b 7 b 6 0 0 : Port is n ot used. 0 1 : Port is use d.
CHAPTER 4 NDA-24298 Page 136 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 194 01 1 b 0 For IPX, assign 01 He x. 0 b 1 Not used 0 b 2 Not used 0 b 3 Not used 0 b 4 Not used 0 b 5 Not used 0 b 6 Not used 0 b 7 Not used 195 00 Not used 196 00 Not used 197 00 Not used 198 1 b 0 Fo r IPX, Module Grou p 0 S ide 0.
NDA-24298 CHAPTER 4 Page 137 Issue 1 ASYD : Assignment o f System Data 1 200 b 0 LP08 #0 is moun ted on P BI4 0 Module for IPX-UMG sys t em b 1 LP08 #1 is moun ted on P BI4 0 Module for IPX-UMG sys t .
CHAPTER 4 NDA-24298 Page 138 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 205 b 0 LP28 #0 is moun ted on P BI6 8 Module for IPX-UMG sys t em b 1 LP28 #1 is moun ted on P BI6 8 Module for IPX-UMG .
NDA-24298 CHAPTER 4 Page 139 Issue 1 ASYD : Assignment o f System Data 1 210 00 Not used 213 00 Not used 214 00 b 0 Not used b 1 b 2 b 3 b 4 b 5 Node Suppres sion - Centralized Billing CC IS 0/1 = Out/In Service b 6 Not used b 7 215 00 Not used 219 00 Not used 220 b 0 Proto c ol of IS DN T er mi nal (BRI st ation) 0:J apan ( INS64 ) 1:U.
CHAPTER 4 NDA-24298 Page 140 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 229 00 0 b 0 Disable Attendant Con sole Loop k eys when that c on s ole is in Night Mode ( Nite K e y engaged ) 0/1 = No/.
NDA-24298 CHAPTER 4 Page 141 Issue 1 ASYD : Assignment o f System Data 1 234 b 0 Connection ack no wledge polarity re v ersal signal 0/1 = Not Req uired/Required (Mu lti-Frequency) 0 b 1 Not used b 2 .
CHAPTER 4 NDA-24298 Page 142 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 240 0 b 0 Not used 0 b 1 0 b 2 0 b 3 b 4 This bit d e f ines the meaning of the “ Station Informa tion ” in the of f ice that has VMS/Host Computer within the CCIS No. 7 Network.
NDA-24298 CHAPTER 4 Page 143 Issue 1 ASYD : Assignment o f System Data 1 241 b 0 Data Port Chim e Co ntrol by SCF 0/1 = T o be controlled/No t to be controlled b 1 The n u mber of digits disp l a yed .
CHAPTER 4 NDA-24298 Page 144 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 244 b 0 Answer by R adio P aging answer cod e. 0/1 = Out/In Service Note: This bit is val id when SY S-1, IN DEX 73, B it 4 is 1 (= Station Numb er is Automatically sent) .
NDA-24298 CHAPTER 4 Page 145 Issue 1 ASYD : Assignment o f System Data 1 246 b 0 While en gaging in a tw o-party cal l with a station/trunk, th e Attendant places the call on hold by pressing either the ANSWER ke y or the Incoming Call Identif ication (ICI) ke y and answers the ne xt call.
CHAPTER 4 NDA-24298 Page 146 Issu e 1 ASYD : As sig n m ent of Syst em Da ta Note 1: When this data has been set a s specified below, the alarm message output valu e becomes 80% and the alarm messa ge output clea r message outpu t value becomes 50% rega rdless of the dat a.
NDA-24298 CHAPTER 4 Page 147 Issue 1 ASYD : Assignment o f System Data SYST EM DA TA TYPE (SYS) SYSTEM DA T A IND EX (INDEX) 0 - 511 DA T A (D A T A ) 00 - FF (He x) BIT CORRESPONDING DA T A SYSTEM D .
CHAPTER 4 NDA-24298 Page 148 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 257 b 0 DLKC C ircui t Ca rd for Atte ndant Co nsole (A TT CON) 0/1 = Not Exist in sy stem /Exi st in sys tem Note 1 , No.
NDA-24298 CHAPTER 4 Page 149 Issue 1 ASYD : Assignment o f System Data 1 288 b 0 Output Port for SMDR A Apparatus • When b 4 = 0 (IO C equi pment No.
CHAPTER 4 NDA-24298 Page 150 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 291 b 0 F ault detect i on timer of SMDR B V alue for th e f irst digit (min): (0~9 ) Hex A~F Hex: Not used • T imer v al ue ranges from 1 to 99 mi n- utes. • 00 He x: W ithout faul t detec tion Normally , Assign 00 Hex.
NDA-24298 CHAPTER 4 Page 151 Issue 1 ASYD : Assignment o f System Data 1 294 b 0 Output Port for SMDR D Apparatus • When b 4 = 0 (IO C equi pment No.
CHAPTER 4 NDA-24298 Page 152 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 304 b 0 Indi vidual Speed Calli ng Dat a Sav e 0/1 = Ou t/In Servic e (This dat a is val id when SYS1, IN DE X 90, b 1 = .
NDA-24298 CHAPTER 4 Page 153 Issue 1 ASYD : Assignment o f System Data 1 322 b 0 T imin g start to dial Attendant Consol e A ssign di git use d Note: When SYS-1, INDEX 92, b 0 = “ 0 ” (Ind ividual SYS -2 T able Development), pr epar e separ ate SY S-2 Pr ogr amming Sheets fo r eac h T enant (TN).
CHAPTER 4 NDA-24298 Page 154 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 1 388 0 b 0 - b 3 Not used b 4 The way to answer the I nternal Zone Paging call; 0 = Press the Prime Line k ey after Of f-Hook 1 = Of f-Hook Note: V alid for software Release 9 or late r.
NDA-24298 CHAPTER 4 Page 155 Issue 1 ASYD : Assignment o f System Data 1 439 b 0 - b 6 Not used b 7 Station Hu nti ng by call ki nd 0/1 = In valid/V alid Note: A vailable for so ftwar e Release 9 or later .
CHAPTER 4 NDA-24298 Page 156 Issu e 1 ASYD : As sig n m ent of Syst em Da ta T able 4- 2 Assign ed C ode in 1st Column 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 A B C D E F A B C D E F * Upper 4bit Lowe.
NDA-24298 CHAPTER 4 Page 157 Issue 1 ASYD : Assignment o f System Data SYSTEM DA T A TYPE (SYS) TENANT NUMBER (TN) 1 - 63 SYSTE M DA TA INDEX (INDEX) 0 - 15 DA T A (D A T A) 00 - FF (Hex) BIT CORRESPO.
CHAPTER 4 NDA-24298 Page 158 Issu e 1 ASYD : As sig n m ent of Syst em Da ta Note: b 0 , b 1 , and b 7 designate t he t ype of sender s igna l for outgoi ng cal ls pla ced o ver ro utes program med as “ DP/PB ” via parameter ONSG (CDN: 2) of command ARTD (Route Class Da ta).
NDA-24298 CHAPTER 4 Page 159 Issue 1 ASYD : Assignment o f System Data SYSTEM DA T A TYPE (SYS) TENANT NUMBER (TN) 1 - 63 SYSTE M DA TA INDEX (INDEX) 0 - 15 DA T A (D A T A) 00 - FF (Hex) BIT CORRESPO.
CHAPTER 4 NDA-24298 Page 160 Issu e 1 ASYD : As sig n m ent of Syst em Da ta Note: When data “ 1 ” i s assigned, ei ther SI D = 3 or 1 9 may be assi gned via command AS PA.
NDA-24298 CHAPTER 4 Page 161 Issue 1 ASYD : Assignment o f System Data SYSTEM DA T A TYPE (SYS) TENANT NUMBER (TN) 1 - 63 SYSTE M DA TA INDEX (INDEX) 0 -15 DA T A (D A T A) 00 - FF (Hex) BIT CORRESPON.
CHAPTER 4 NDA-24298 Page 162 Issu e 1 ASYD : As sig n m ent of Syst em Da ta SYSTEM DA T A TYPE (SYS) TENANT NUMBER (TN) 1 - 63 SYSTE M DA TA INDEX (INDEX) DA T A (D A T A) 00 - FF (Hex) BIT CORRESPON.
NDA-24298 CHAPTER 4 Page 163 Issue 1 ASYD : Assignment o f System Data SYSTEM DA T A TYPE (SYS) TENANT NUMBER (TN) 1 - 63 SYSTEM DA TA (INDEX) INDEX 0 - 15 DA TA (D A T A) 00 - FF (He x) BIT CORRESPON.
CHAPTER 4 NDA-24298 Page 164 Issu e 1 ASYD : As sig n m ent of Syst em Da ta SYSTEM DA T A TYPE (SYS) TENANT NUMBER (TN) 1 - 63 SYSTE M DA TA INDEX (INDEX) 0 - 15 DA T A (D A T A) 00 - FF (Hex) BIT CO.
NDA-24298 CHAPTER 4 Page 165 Issue 1 ASYD : Assignment o f System Data SYSTEM DA T A TYPE (SYS) TENANT NUMBER (TN) 1 - 63 SYSTE M DA TA INDEX (INDEX) 0 - 15 DA T A (D A T A) 00 - FF (Hex) BIT CORRESPO.
CHAPTER 4 NDA-24298 Page 166 Issu e 1 ASYD : As sig n m ent of Syst em Da ta SYSTEM DA T A TYPE (SYS) TENANT NUMBER (TN) 1 - 63 SYSTE M DA TA INDEX (INDEX) 0 - 15 DA T A (D A T A) 00 - FF (Hex) BIT CO.
NDA-24298 CHAPTER 4 Page 167 Issue 1 ASYD : Assignment o f System Data SYSTEM DA T A TYPE (SYS) TENANT NUMBER SYST EM DA TA INDEX (INDEX) 1 - 15 DA TA (D A T A) 00 - FF (Hex) BIT CORRESPONDING DA TA S.
CHAPTER 4 NDA-24298 Page 168 Issu e 1 ASYD : As sig n m ent of Syst em Da ta Note: When the numberi ng plans wit hin the CCIS Network ar e unifi ed, assign “ 0 ” to this data ; otherwi se assi gn “ 1.
NDA-24298 CHAPTER 4 Page 169 Issue 1 ASYD : Assignment o f System Data SYSTE M DA TA TYPE (SYS) SYST EM DA T A INDEX (INDEX) 0 - 31 DA T A (D A T A) 00 - FF (Hex) BIT CORRESPONDING DA T A SYSTE M D A T A CON TENTS DA T A 0/1 BIT 3 0 b 0 ON T ime is to be assigned a v al ue from 1 Hex to F Hex (1~ 15).
CHAPTER 4 NDA-24298 Page 170 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 3 3 b 0 2 Burs t (0.4 sec . – ON, 0.2 sec.-OFF , 0.4 s ec. – ON) on the ON Time fo r Ringer Pattern 0 0/1 = Not Re quire d/Re quire d b 1 2 Bu rst (0 .4 se c. – ON, 0.2 sec.
NDA-24298 CHAPTER 4 Page 171 Issue 1 ASYD : Assignment o f System Data 3 11 b 0 PBST : P B signal (DTM F) timer fo r D term and desk console. This d ata is to be assigned from 0 Hex to F H ex (0~1 5).
CHAPTER 4 NDA-24298 Page 172 Issu e 1 ASYD : As sig n m ent of Syst em Da ta 3 28 00 No t used 29 00 No t used 30 00 No t used 31 00 No t used SYSTE M DA TA TYPE (SYS) SYST EM DA T A INDEX (INDEX) 0 -.
NDA-24298 CHAPTER 4 Page 173 Issue 1 ASYDL : As signment of Sy stem Data in to Local DM (LDM) ASYDL: Assignment of System Dat a into Local DM (LDM) SYSTEM DA T A TYPE (SYS) SYSTEM DA T A IND EX (INDEX.
CHAPTER 4 NDA-24298 Page 174 Issu e 1 ASYDL : Assignment of System Data into Local DM (LDM) 1 515 IP Address (H ex) for PBX ov er Exte rnal LAN Not e: This data is va lid when the PBX is con nected to the external PC. When default I P address (172 . 16.
NDA-24298 CHAPTER 4 Page 175 Issue 1 ASYDL : As signment of Sy stem Data in to Local DM (LDM) 1 523 Default Gateway Address of External LAN Gateway Addr ess (IP ad dres s of Route r) o f Net w ork connecting PBX. Not e: This data is va lid when the PBX is con nected to the external PC LAN.
CHAPTER 4 NDA-24298 Page 176 Issu e 1 ASYDL : Assignment of System Data into Local DM (LDM) 1 528 b 0 Voice Recognition Services Timer MTC = 0 - 15 (0 h to Fh) se c o nds Timer value = MTC × TC This timer defaul t s to 30 seco nds when 00 h is assigned.
NDA-24298 CHAPTER 4 Page 177 Issue 1 ASYDL : As signment of Sy stem Data in to Local DM (LDM) 1 531 SDT card accommodation 0/1 = Not accommodated/Acco mmodated b1 → MG1, b3 → MG3, b5 → MG5, b7 → MG7 Not e 1: The SDT car d can be mounte d in the odd MG only .
CHAPTER 4 NDA-24298 Page 178 Issu e 1 ASYDL : Assignment of System Data into Local DM (LDM) 1 576 b 0 Fusion Central ized SMDR Se rvice (Polling Met hod) 0/1 = No/Yes b 1 SMDR for Fusion Network station-to-station calls 0/1 = All Station Call s/Fusion Statio n Calls on ly Not e: Data valid on ly when A SYD L Index 512 is set.
NDA-24298 CHAPTER 4 Page 179 Issue 1 ASYDL : As signment of Sy stem Data in to Local DM (LDM) 1 580 b 0 Centralized Billin g-Fusion output text forma t of SMDR C 0/1 = IMS ( ICS ) fo rmat/ IPX forma t b 1 ~ b 3 Not use d b 4 0/1 = SMDR C Ap paratus with LAN in terface is not used/ use d.
CHAPTER 4 NDA-24298 Page 180 Issu e 1 ASYDL : Assignment of System Data into Local DM (LDM) 1 584 b 0 ~ b 7 Design ate the Polling cycle with in the Self Node (for IPX- UMG system onl y) by the numbe r of calls inte nded for Poll- ing of the system.
NDA-24298 CHAPTER 4 Page 181 Issue 1 ASYDL : As signment of Sy stem Data in to Local DM (LDM) 1 608 The Fusion Point Co de (FPC) of the polling des tination. FPCs rang e from 1 to 253 as show n in th e tabl e below . Assi gn data “ 1 (Poll ing destinati on of Cent ralized Bil ling-Fusion) ” for the correspondin g FPC node.
CHAPTER 4 NDA-24298 Page 182 Issu e 1 ASYDL : Assignment of System Data into Local DM (LDM) 1 640 b 0 Fusion Point Co de (FPC) of t he node provi ding ATT- CON. Assign FPC o f a terminat ing node for oper ator calls from other no des and Ring D own (IC) calls from PSTN .
NDA-24298 CHAPTER 4 Page 183 Issue 1 ASYDL : As signment of Sy stem Data in to Local DM (LDM) 1 642 Speech Path Memory of TONE ROM source selection for Voice Prompt Service. 0/1 = TONE R OM/Speech Path Memory 643 644 645 646 Speech Path Memory of MUSIC ROM source selections for Voice Prompt Service.
CHAPTER 4 NDA-24298 Page 184 Issu e 1 ASYDL : Assignment of System Data into Local DM (LDM) Example: Wh en a call t e rm inates on a D term fr om T eleph one number 123 456789, the D term display s as fo llo ws dependin g on the data settings.
NDA-24298 CHAPTER 4 Page 185 Issue 1 ASYDL : As signment of Sy stem Data in to Local DM (LDM) SYSTEM DA T A TYPE (SYS) SYSTEM DA T A IND EX (INDEX) 512 - 1535 DA TA (D A T A) 00 - FF (He x) BIT CORRES.
CHAPTER 4 NDA-24298 Page 186 Issu e 1 ASYDL : Assignment of System Data into Local DM (LDM) 1 800 b 0 ALGNL/ALGSL co mmand tenant User Grou p Number (UGN) table develo pment of Local Data Memory (LDM).
NDA-24298 CHAPTER 4 Page 187 Issue 1 ASYDL : As signment of Sy stem Data in to Local DM (LDM) 1 805 b 0 (For IPX-UMG system) Periodic Refres h for office d ata copy Note 1 0/1 = Execute/Stop b 1 (For .
CHAPTER 4 NDA-24298 Page 188 Issu e 1 ASYDL : Assignment of System Data into Local DM (LDM) 1 834 b 0 0/1 = -/MC0 with LAN interface is used b 1 0/1 = -/MC1 with LAN interface is used b 3 ~ b 7 Not use d 835 ~ 863 Not used 864 b 0 0/1 = Built-in IP , ACDP is not used/used b 1 Output the system message when TCP-IP connection is discon nect ed.
NDA-24298 CHAPTER 4 Page 189 Issue 1 ASYDL : As signment of Sy stem Data in to Local DM (LDM) 1 867 ~ 927 Not used 928 (For IPX-U system) Fusion Point C ode (FPC) of the c onnecting ISW. (For IPX-UMG system) Fixed t o “ 0 ” . Not e 929 b 0 ~ b 3 TSW card accommodation on ISW in IPX-U system or on ISWR in IPX-UMG system.
CHAPTER 4 NDA-24298 Page 190 Issu e 1 ASYDL : Assignment of System Data into Local DM (LDM) 1 938 ~ 941 FPC of the LN connected to TSW2 in the ISW. (For IPX-UMG system) Logical PBI Number of LMG connected to TSW2 in the I SWR. Not e 1: This data is ava ilable w hen SYS1, INDEX929, b2= 1 i s assi gned .
NDA-24298 CHAPTER 4 Page 191 Issue 1 AUNT : Assignment of Unit Data A UNT: Assignment of Unit Data 1. General This comma n d assi g ns the U nit data .
CHAPTER 4 NDA-24298 Page 192 Issu e 1 AUNT : Assignment of Unit Data 3. Data Entry Instructi ons 1 = Port Interface Module (PIM) 2 = Power Failure Transfer (PFT) Circuit Card 3 = Not used 4 = Line Tes.
NDA-24298 CHAPTER 4 Page 193 Issue 1 AUNT : Assignment of Unit Data 4. Data Sheet (a) Por t Inte rface M odul e (PIM) (TY PE = 1) (b) Power F ai lure T ransfer Circui t Card (PFT) (TYPE = 2) (c) Lin e T est C ircui t Card (TY PE = 4) MODULE GROUP NUMBER (MG) UNIT TYPE INDIC ATION (TYPE) 1 – 4 D A T A OF UNIT 1/2 NO .
CHAPTER 4 NDA-24298 Page 194 Issu e 1 AIOC : Assignment of IOC Port Data AIO C: Assignment of IOC Port Data 1. General This com mand assi gns the I/O port a ttribu tion d ata. 2. Precautions 1. When the I/O port att rib uti on is chang ed, t he IOC card is ini tiali zed.
NDA-24298 CHAPTER 4 Page 195 Issue 1 AIOC : Assignment of IOC Port Data 3. Data Entry Instructi ons IOC port number (#0 or #1 card is specified by IOC switch settings, #0 IOC card has port numbers 0 t.
CHAPTER 4 NDA-24298 Page 196 Issu e 1 AIOC : Assignment of IOC Port Data PROTOCOL 0 = Free Wheeling PARITY BIT 0 = Non Parity SPEED 0 = Default (4800bps) 1 = 300 bps 3 = 1200 bps 5 = 4800 bps 2 = 600 .
NDA-24298 CHAPTER 4 Page 197 Issue 1 AIOC : Assignment of IOC Port Data CHARACTER BIT 0=8bits 1=7bits BUSY SIGNAL 0=(+) 1=(-) SYNC CHARACTER 0=Bi-sync 1=Mono-sync PB SIGNAL 0=No PB signal 1=PB signal is required ENH (Extended block parameter) 0=Invalid Note 1=Valid (Continue to following attribution data assignment.
CHAPTER 4 NDA-24298 Page 198 Issu e 1 AIOC : Assignment of IOC Port Data Example: Stand ar d data fo r PMS and Hotel pr inte r. • PMS (Le vel 2A) : PR O TOCOL = 3 (Le vel 2A) SPEED = 3 (1200bps ) P .
NDA-24298 CHAPTER 4 Page 199 Issue 1 AIOC : Assignment of IOC Port Data 4. Data Sheet (a) TER MI N AL=1 (P ri nter/M C I ) (b) TERMIN AL=2 (MA T) (c) TERMIN AL=3 (CMA T) IOC PO RT NUMBER (IOC) TERMINA.
CHAPTER 4 NDA-24298 Page 200 Issu e 1 AIOC : Assignment of IOC Port Data (d) TERMIN AL=4 (SMDR FREE WHEELING) (e) TERM IN AL=5 (SMDR BSC) (f) TERMI NAL=6 (A TM Modul e) IOC PO RT NUMBER (IOC ) TERMINA.
NDA-24298 CHAPTER 4 Page 201 Issue 1 AIOC : Assignment of IOC Port Data (g) TERM IN AL=7 (PMS) When ENH=1 (Option) , IOC PORT NUMBER (IOC) TERMINAL KIND (TERMINAL) 7 (PRO TOCOL) (SPEED) (P ARI TY BIT).
CHAPTER 4 NDA-24298 Page 202 Issu e 1 AIOC : Assignment of IOC Port Data (h) TE RMIN AL= 8 (H o tel Printe r) IOC PORT NUMBER (IOC) TERMINAL KIND (TERMINAL) 10 (PRO TOCOL) (SPEED) (P ARI TY BIT) (ST O.
NDA-24298 CHAPTER 4 Page 203 Issue 1 ASTD : Assi gnment of State T ranslation Data ASTD: Assignment of State T ranslation Data 1. General This command trans lates th e system attrib utes.
CHAPTER 4 NDA-24298 Page 204 Issu e 1 ASTD : Assi gnment of State T ranslation Data 1 0 T runk Release 0 Station (Calling Party Release) 1 T runk Not e 1 1 2 3 4 * = standard settings Note 2: One setting appl ies t o fi ve items.
NDA-24298 CHAPTER 4 Page 205 Issue 1 ASTD : Assi gnment of State T ranslation Data 4. Data Assignment Sheet ST A TE TRANSLA TION MAIN CA TEGOR Y NUMBER (STM) 0 - 31 ST A TE TRANSLA TION CA TEGOR Y NUM.
CHAPTER 4 NDA-24298 Page 206 Issu e 1 AOFC : Assignment o f Office Name A OFC: Assignment of Office Name 1. General This command assign s the offic e name. 2. Precautions 1. The data assignment of thi s command is the same as the ASYD command SYS1, INDEX96 through 115.
NDA-24298 CHAPTER 4 Page 207 Issue 1 AOFC : Assignment of Office Name 4. Data Sheet OFFICE NAME MAXIMUM 20 CHARACTERS R EMARKS.
CHAPTER 4 NDA-24298 Page 208 Issu e 1 AUIDL : Assignment of User ID Data for LDM A UIDL : Assignment of Use r ID Data for LDM 1. General This command i s used to as sign t he Use r ID data such a s us.
NDA-24298 CHAPTER 4 Page 209 Issue 1 ANPD : Assignment of Numbering Plan Data ANPD: Assignment of Numbering Pl an Data 1. General This command assig ns the minimum number of digits needed to determine the service required to the first digit receiv ed (pre -transl atio n).
CHAPTER 4 NDA-24298 Page 210 Issu e 1 ANPD : Assignment of Numbering Plan Data 4. Data Sheet TENANT NUMBER (TN) 1ST DIGIT (1ST DC) CONNECTION ST A TUS INDEX (CI) NUMBER OF NECESSAR Y DIGITS (NND) BUSY.
NDA-24298 CHAPTER 4 Page 211 Issue 1 ANPDL : Assignment of Numbering Plan Data for Local Data Memory ANPDL: Assignment o f Numbering Plan D ata for Local Data Memory 1. General This comma nd assigns the minimum nu mber of di gits neede d to dete rmine the se rvice which is requir ed to the first d igit re ceiv ed (pr e-tran slati on).
CHAPTER 4 NDA-24298 Page 212 Issu e 1 ANPDL : Assignment of Numbering Plan Data for Local Data M emory 3. Data Entry Instructi ons The first digit of service access code, etc. (0-9, *, #) 1st DC CI BLF 1st DIGIT CODE (1st DC) TENANT NUMBER (TN) Whether the station busy status is monitored by the system or not.
NDA-24298 CHAPTER 4 Page 213 Issue 1 ANPDL : Assignment of Numbering Plan Data for Local Data Memory 4. Data Sheet TENANT NUMBER (TN) 1ST DIGIT (1ST DC) CONNECTION ST A TUS INDEX (CI) NUMBER OF NECESS.
CHAPTER 4 NDA-24298 Page 214 Issu e 1 ASP A : Ass ig n ment of Spec ial Access Cod e ASP A: Assignment of Special Access Code 1. General This command deter mi nes th e kind of service and Access Code to execute. 2. Precautions 1. This command is used fo r the Busi ness Applica tion.
NDA-24298 CHAPTER 4 Page 215 Issue 1 ASP A : Assignment o f Special Acc ess Code 3. Data Entry Instructi ons Access code (Max. 6 digits) Assign the number of digits for Station number.
CHAPTER 4 NDA-24298 Page 216 Issu e 1 ASP A : Ass ig n ment of Spec ial Access Cod e Note: When Split Ca ll F orwar ding is in s ervice (t he command ASYD, SYS1, INDEX79, b it 2=1) , this acces s cod e is use d for Split Cal l F orwar ding service . The acce ss cod es for Ca ll F orwar ding serv ice a r e spe cif ied b y SR V=3 (SSCA), SID A 86-89.
NDA-24298 CHAPTER 4 Page 217 Issue 1 ASP A : Assignment o f Special Acc ess Code Note 1: This d ata i s val id fo r Cal l F or war ding s ervic e when Spl it Call F orw ar ding is in s ervice. (The com mand AS YD, SYS 1, INDE X 79, bi t2 = 1. ) Note 2: This da ta can be set w hen th e connec tion Status Ind ex (CI) = No rmal (N).
CHAPTER 4 NDA-24298 Page 218 Issu e 1 ASP A : Ass ig n ment of Spec ial Access Cod e Assign the number of advanced trunk routes. ROUTE NUMBER (RT) COUNT Assign a dummy route number.
NDA-24298 CHAPTER 4 Page 219 Issue 1 ASP A : Assignment o f Special Acc ess Code Tabl e 4- 6 EQP Para meter D A T A M EANING DA T A ME ANING 0 Dead Le v el Number 33 Not Used 1 Unused N umb er 34 Auto.
CHAPTER 4 NDA-24298 Page 220 Issu e 1 ASP A : Ass ig n ment of Spec ial Access Cod e Note: EQP3 and 5-14 can be used for SR V = ANNC (Announcement Ser vice).
NDA-24298 CHAPTER 4 Page 221 Issue 1 ASP A : Assignment o f Special Acc ess Code 4. Data Sheet (a) Sta tion ( SR V = STN) Note: Max. number of digit s for st at i o n is 5.
CHAPTER 4 NDA-24298 Page 222 Issu e 1 ASP A : Ass ig n ment of Spec ial Access Cod e (b) Service cod e (SR V = SSC) Note 1: When Split Call F orwar ding is in ser vice ( the c ommand ASYD, SYS 1, INDEX79, bi t2=1) , th is acc ess cod e is used for Split Call F orwar ding .
NDA-24298 CHAPTER 4 Page 223 Issue 1 ASP A : Assignment o f Special Acc ess Code (b) Service cod e (SR V = SSC) (Conti nued) TENANT NUM BER (TN) A CCESS CODE (A CC) MAXIMUM 6 DIGITS CONNECTION ST A TU.
CHAPTER 4 NDA-24298 Page 224 Issu e 1 ASP A : Ass ig n ment of Spec ial Access Cod e Note: The available numbers of necessary digits var y depending on th e parameter SI D.
NDA-24298 CHAPTER 4 Page 225 Issue 1 ASP A : Assignment o f Special Acc ess Code (c) Service code Appendi x (SR V = SSCA) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXI MUM 6 DIGITS CONNECTION ST A TUS I.
CHAPTER 4 NDA-24298 Page 226 Issu e 1 ASP A : Ass ig n ment of Spec ial Access Cod e NN o r m a l S S C A 6 6 Digital A nnouncemen t Card Multi-channel Recording: Record 67 Not used NN o r m a l S S C.
NDA-24298 CHAPTER 4 Page 227 Issue 1 ASP A : Assignment o f Special Acc ess Code Note: When Split Ca ll F orwar ding is in s ervice (t he command ASYD, SYS1, INDEX79, b it 2=1) , this acces s cod e is used for Call F orwar ding.
CHAPTER 4 NDA-24298 Page 228 Issu e 1 ASP A : Ass ig n ment of Spec ial Access Cod e (d) Outgoing Call (SR V = OGC) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXI MUM 6 DIGITS CONNECTION ST A TUS IND EX .
NDA-24298 CHAPTER 4 Page 229 Issue 1 ASP A : Assignment o f Special Acc ess Code (e) Outgoing Call W ith Route Adv ance (SR V = OGCA) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXI MUM 6 DIGITS CONNECTIO.
CHAPTER 4 NDA-24298 Page 230 Issu e 1 ASP A : Ass ig n ment of Spec ial Access Cod e (f) Least Cost Routing (S R V = LCR) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXIMUM 6 DIGITS CONN EC TI ON ST A TUS INDEX (CI) 1/ 2 KIND OF SER VICE (SR V) FLEXIBLE RO UT E NUMBER (RT) SECON D DIAL T ONE (2nd.
NDA-24298 CHAPTER 4 Page 231 Issue 1 ASP A : Assignment o f Special Acc ess Code (g) R egister Se nder LCR (SR V=LC RS) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXI MUM 6 DIGITS CONNECTION ST A TUS IND.
CHAPTER 4 NDA-24298 Page 232 Issu e 1 ASP A : Ass ig n ment of Spec ial Access Cod e (h) Off ice T erm ination (SR V = UNIF) TENANT NUM BER (TN) A CCESS CODE (A CC) MAXI MUM 6 DIGITS CON NEC TI ON ST .
NDA-24298 CHAPTER 4 Page 233 Issue 1 ASP A : Assignment o f Special Acc ess Code (i) Announc ement Service (SR V = ANNC) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXIMUM 6 DIGITS CONNECTION ST A TUS IND.
CHAPTER 4 NDA-24298 Page 234 Issu e 1 ASP A : Ass ig n ment of Spec ial Access Cod e (j) Announc ement Service- Multip le An noun cemen t (SR V = ANNCM) TENANT NUMBER (TN) A CCESS CODE (A CC) MAX.
NDA-24298 CHAPTER 4 Page 235 Issue 1 ASP A : Assignment o f Special Acc ess Code (k) Paging Answer (SR V = P A GA) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXIMUM 6 DIGITS CONNECTION ST A TUS INDEX (CI.
CHAPTER 4 NDA-24298 Page 236 Issu e 1 ASP A : Ass ig n ment of Spec ial Access Cod e (l) P agi ng Cance l (SR V = P A GC) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXIMUM 6 DIGITS CONNECTION ST A TUS IN.
NDA-24298 CHAPTER 4 Page 237 Issue 1 ASP AL : Assignment of Special Ac cess Code for LDM ASP AL: Assignment of Special Access Code f or LDM 1. General This comma nd dete rmines the ki nd of se rvice and the s ervice Acces s Code to be exe cute d on the L ocal N ode (LN) in t he Fusion n etwork.
CHAPTER 4 NDA-24298 Page 238 Issu e 1 ASP AL : Assign men t of Spec ial A cces s Code for LDM 3. Data Entry Instructi ons Access code (Max. 6 digits) TENANT NUMBER (TN) ACCESS CODE (ACC) MAX.
NDA-24298 CHAPTER 4 Page 239 Issue 1 ASP AL : Assignment of Special Ac cess Code for LDM Note 1: When Split Call F orwar ding is in ser vice (the command ASYDN, SYS1, INDEX79, bi t2=1), thi s access code is use d for Split Cal l F orwar ding service .
CHAPTER 4 NDA-24298 Page 240 Issu e 1 ASP AL : Assign men t of Spec ial A cces s Code for LDM Note 3: When SRV = SSC (Serv ice cod e) , SI D 36 (Hote l Service) is ass igne d F or detai led informati on on Hotel Servi ce, r efer t o the AASP co mmand.
NDA-24298 CHAPTER 4 Page 241 Issue 1 ASP AL : Assignment of Special Ac cess Code for LDM Note 4: When SRV = SSC (Serv ice co de), SID56 ( Floo r Servic e) i s a ssign ed Note 5: When SRV = SSC (Serv ice code), SID57 (Split Access) is assi gned For detai led info rmation on Hotel Service , refer to the AASP command.
CHAPTER 4 NDA-24298 Page 242 Issu e 1 ASP AL : Assign men t of Spec ial A cces s Code for LDM SERVICE INDEX A (SIDA) 1-255 SIDA When SRV=SSCA (Service Code Appendix) is assigned: Note 1 : For more detail information about Hotel Service, refer to the AASP command .
NDA-24298 CHAPTER 4 Page 243 Issue 1 ASP AL : Assignment of Special Ac cess Code for LDM Assign the number of advanced trunk Route. LOGICAL ROUTE NUMBER (LGRT) Count Assign a dummy route number.
CHAPTER 4 NDA-24298 Page 244 Issu e 1 ASP AL : Assign men t of Spec ial A cces s Code for LDM Note: This T elephone Numb er is avai lable to mak e a call and r eceive a c all withi n the self node only . If the T elephone Number is t o be used wit hin the Fus i on Netwo rk, assign it at Ne twork Contr ol Node (NCN) usi ng the ASP AN command.
NDA-24298 CHAPTER 4 Page 245 Issue 1 ASP AL : Assignment of Special Ac cess Code for LDM 4. Data Sheet (a) Service Code (SR V = SSC) Note 1: The par amete r may var y dependin g on the servic e.
CHAPTER 4 NDA-24298 Page 246 Issu e 1 ASP AL : Assign men t of Spec ial A cces s Code for LDM (a) Service cod e (SR V = SSC) (Conti nued) Note 1: The para meter may vary depending on the servic e. Note 2: The available number s of necessary dig its vary depend ing on the para meter SID.
NDA-24298 CHAPTER 4 Page 247 Issue 1 ASP AL : Assignment of Special Ac cess Code for LDM (a) Service cod e (SR V = SSC) (Conti nued) Note 1: The para meter may vary depending on the servic e. Note 2: The available number s of necessary dig its vary depend ing on the para meter SID.
CHAPTER 4 NDA-24298 Page 248 Issu e 1 ASP AL : Assign men t of Spec ial A cces s Code for LDM (a) Service Code (SR V = SSC) (Continued) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXI MUM 6 DIG ITS CONNEC.
NDA-24298 CHAPTER 4 Page 249 Issue 1 ASP AL : Assignment of Special Ac cess Code for LDM (a) Service Code (SR V = SSC) (Continued) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXI MUM 6 DIG ITS CONNECTION .
CHAPTER 4 NDA-24298 Page 250 Issu e 1 ASP AL : Assign men t of Spec ial A cces s Code for LDM (a) Service Code (SR V = SSC) (Continued) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXI MUM 6 DIG ITS CONNEC.
NDA-24298 CHAPTER 4 Page 251 Issue 1 ASP AL : Assignment of Special Ac cess Code for LDM (a) Service Code (SR V = SSC) (Continued) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXIMUM 6 DIGITS CONNECTION ST A TUS INDEX (CI) N/H/B KIND OF SER VICE (SR V) SER VICE INDEX (SID) SER VICE INDEX NUMBER (No.
CHAPTER 4 NDA-24298 Page 252 Issu e 1 ASP AL : Assign men t of Spec ial A cces s Code for LDM (a) Service Code (SR V = SSC) (Continued) Note: Split Acce ss (Same Number Access ) (SID = 57) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXI MUM 6 DIGITS CONNECTION ST A TUS INDEX (CI) N/H/B KIND OF SER VICE (SR V) SER VICE INDEX (SID) ASSIGN NUMBER (NO .
NDA-24298 CHAPTER 4 Page 253 Issue 1 ASP AL : Assignment of Special Ac cess Code for LDM (b) Service Code Appendix (SR V = SSCA) Note 1: The para meter may vary depending on the servic e. Note 2: F or detailed informa tion about Hotel Serv ice, r efer to the AASP command.
CHAPTER 4 NDA-24298 Page 254 Issu e 1 ASP AL : Assign men t of Spec ial A cces s Code for LDM (b) Service Code Append ix (SR V = SSCA) (Contin ued) Note: When Split Ca ll F orwar ding is in s ervice (t he command ASYD, SYS1, INDEX79, b it 2=1) , this acces s cod e is used for Call F orwar ding.
NDA-24298 CHAPTER 4 Page 255 Issue 1 ASP AL : Assignment of Special Ac cess Code for LDM (c) Outgoing Call (SR V = OGC) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXIMUM 6 DIGITS CONNECTION ST A TUS INDE.
CHAPTER 4 NDA-24298 Page 256 Issu e 1 ASP AL : Assign men t of Spec ial A cces s Code for LDM (d) Outgoing Call W ith Route Adv ance (SR V = OGCA) TENANT NUMBER (TN) A C CESS CODE (A CC) MAXIMU M 6 DI.
NDA-24298 CHAPTER 4 Page 257 Issue 1 ASP AL : Assignment of Special Ac cess Code for LDM (e) Least Cost Routing (SR V = LCR) TENANT NUM BER (TN) A CCESS CODE (A CC) MAXI MUM 6 DIGITS CONNECTION ST A TUS INDEX (CI) N/H KIND OF SER VICE (SR V ) LOGICAL RO UT E NUMBER (LGRT) SECON D DIAL T ONE (2nd.
CHAPTER 4 NDA-24298 Page 258 Issu e 1 ASP AL : Assign men t of Spec ial A cces s Code for LDM (f) Registe r S e nder LCR (S R V = LCR S) TENANT NUM BER (TN) A CCESS CODE (A CC) MAXIMUM 6 DIGITS CONNEC.
NDA-24298 CHAPTER 4 Page 259 Issue 1 ASP AL : Assignment of Special Ac cess Code for LDM (g) Announcement Servi ce (SR V = ANNC) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXIMUM 6 DIGITS CONNECTION ST A.
CHAPTER 4 NDA-24298 Page 260 Issu e 1 ASP AL : Assign men t of Spec ial A cces s Code for LDM (h) Announcement Ser vi ce- Multip le An noun cement (SR V = ANNCM) TENANT NUMBER (TN) A CCESS CODE (A CC) MAX.
NDA-24298 CHAPTER 4 Page 261 Issue 1 ASP AL : Assignment of Special Ac cess Code for LDM (i) P aging Answer (S R V = P A GA) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXIMUM 6 DIGITS CONNECTION ST A TUS.
CHAPTER 4 NDA-24298 Page 262 Issu e 1 ASP AL : Assign men t of Spec ial A cces s Code for LDM (j) P agi ng Cance l (SR V = P A GC) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXIMUM 6 DIGITS CONNECTION ST.
NDA-24298 CHAPTER 4 Page 263 Issue 1 ASP AL : Assignment of Special Ac cess Code for LDM (k) T elephone Number (S RV = TELN) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXI MUM 6 DIGITS CONNECTION ST A TU.
CHAPTER 4 NDA-24298 Page 264 Issu e 1 AMND : Assi gnment of Maximum Nece ssary Digits Data AMND: Assignment of Maximum Necessary Digits Data 1. General This command as signs the number of necessary digits to be received by the R egister (ORT/ IRT) circuit.
NDA-24298 CHAPTER 4 Page 265 Issue 1 AMND : Assignment of Max imum Nec essary Digits D ata 3. Data Entry Instructi ons Enter the tenant number of the necessary digits data to be applied.
CHAPTER 4 NDA-24298 Page 266 Issu e 1 AMND : Assi gnment of Maximum Nece ssary Digits Data 4. Data Sheet TENANT NUMBER (TN) DESTINA TION CODE (DC) MAXIMU M 10 DIGITS MAXIMUM NECESSAR Y DIGITS (MND) 1 .
NDA-24298 CHAPTER 4 Page 267 Issue 1 ARNP : Assignment of Reverse Numbering P lan Data ARNP: Assignment of Rever se Numbering Plan Data 1. General This command assign s the access code for each ind ividual rout e in acco rda nce with the ARTD command.
CHAPTER 4 NDA-24298 Page 268 Issu e 1 ARNP : Assignment of Reverse Numbering Plan Data 3. Data Entry Instructi ons The external trunk route number. Enter the ACC.
NDA-24298 CHAPTER 4 Page 269 Issue 1 ARNP : Assignment of Reverse Numbering P lan Data 4. Data Sheet RO UT E NUMBER (RT) A CCESS CODE (A CC) MAXIMUM 4 DIGITS REMARKS 0 S elf Of fice Id entification C ode (for No.
CHAPTER 4 NDA-24298 Page 270 Issu e 1 ARNPL : Assignment of Reverse Numbering Plan Da ta for LDM ARNPL: Assignment of Reverse Numbering Plan Data for LDM 1. General This command assign s the acce ss code for each i ndividual l ogical ro ute in accordanc e with the ARTDN c om- mand.
NDA-24298 CHAPTER 4 Page 271 Issue 1 ARNPL : Assignment of Reverse Numbering Plan Data for LDM 3. Data Entry Instructi ons The external trunk route number.
CHAPTER 4 NDA-24298 Page 272 Issu e 1 ARNPL : Assignment of Reverse Numbering Plan Da ta for LDM 4. Data Sheet LOGICAL RO UT E NUMBER (LGRT) A CCESS CODE (A CC) MAXIMUM 4 DIGITS REMARKS 0 S elf Of fice Id entification C ode (for No.
NDA-24298 CHAPTER 4 Page 273 Issue 1 ANND : Assignment of Necessary Digits Data ANND: Assignment of Necessary Digits Data 1. General This command assign s the n ecessary number of di gits for a pa rticul ar trunk r oute.
CHAPTER 4 NDA-24298 Page 274 Issu e 1 ANND : Assignment of Necess ary Digits Data 3. Data Entry Instructi ons I = Incoming (Not used) O = Outgoing IC/OG ROUTE NUMBER (RT) INCOMING/ OUTGOING CALL (IC/OG) I/O NUMBER OF NECESSARY DIGITS (NND) 1-24 REMARKS Enter desired number of necessary digits.
NDA-24298 CHAPTER 4 Page 275 Issue 1 ANND : Assignment of Necessary Digits Data 4. Data Sheet ROU TE NUMBER (R T) INCOMING/ OUTGOING CALL (IC/OG) 1/2 NUMBER OF NECESSAR Y DIG IT S (NND) 1 – 24 REMAR.
CHAPTER 4 NDA-24298 Page 276 Issu e 1 ANNDL : Assignment of Necess ary Digits Data for LDM ANNDL: Assignment of Necessary Digits Data f or LDM 1. General This command assign s the n ecessary number of di gits for a part icular log ical t runk rout e. 2.
NDA-24298 CHAPTER 4 Page 277 Issue 1 ANNDL : Assi gnment of Neces sary Digits Data for LDM 4. Data Sheet LOGICAL RO UT E NUMBER (LGRT) INCOMING/ OUTGOING CALL (IC/ OG) I/O NUM BER OF NECESSAR Y DIGITS.
CHAPTER 4 NDA-24298 Page 278 Issu e 1 ASTP : Assignment of Signal T ranslation Pattern ASTP: Assignment of Signal T ranslation P attern 1. General This comma nd assigns the Incoming/ Outgoing Sel ection Transl ation Pat tern Number ( PNI/PNO) for th e incom ing or out goin g trun k rout e.
NDA-24298 CHAPTER 4 Page 279 Issue 1 ASTP : Assignment of Signal T ranslation Pattern 3. Data Entry Instructi ons PNI appears when IC/OG=I is entered. Enter any number with a range from 1 to 15.
CHAPTER 4 NDA-24298 Page 280 Issu e 1 ASTP : Assignment of Signal T ranslation Pattern 4. Data Sheet (a) Inc omin g KIND OF ASSIGNMENT (IC/OG) 1 / 2 TENANT NUMBER (TN) ROUTE NUMBER (RT) INCOMING SELEC.
NDA-24298 CHAPTER 4 Page 281 Issue 1 ASTP : Assignment of Signal T ranslation Pattern (b) Outgoi ng KIND OF ASSIGNMENT (IC/OG) 1 / 2 TENANT NUMBER (TN) ROUTE NUMBER (RT) OUTGOING SELECTIO N TRANSLA TI.
CHAPTER 4 NDA-24298 Page 282 Issu e 1 ASTPL : Assignment of Signal T ranslation Patt ern for LDM ASTPL: Assignment of Signal T ransl ation P attern f or LDM 1. General This command assign s the Incoming/ Outgoi ng Selection Tra nslat ion Patte rn Number (PNI/PNO) for incoming or ou tgoing tr unk route.
NDA-24298 CHAPTER 4 Page 283 Issue 1 ASTPL : Assignment of Signal T ranslation Pattern for LDM 4. Data Sheet (a) Inc omin g KIND OF ASSIGNMENT (IC/O G) I/O TENANT NUMBER (TN) LOGICAL RO UT E NUMBER (L.
CHAPTER 4 NDA-24298 Page 284 Issu e 1 ASTPL : Assignment of Signal T ranslation Patt ern for LDM (b) Outgoi ng KIND OF ASSIGNMENT (IC/O G) I/O TENANT NUMBER (TN) LOGICAL RO UT E NUMBER (LGR T) 1-899 O.
NDA-24298 CHAPTER 4 Page 285 Issue 1 ASTPN : Assignment of Signal T ranslation Pattern for NDM ASTPN: Assignment of Signal T ranslation P attern for NDM 1. General This command assign s the Incoming/ Outgoi ng Selection Tra nslat ion Patte rn Number (PNI/PNO) for incoming or outgo ing tr unk rou te in Fusi on Network.
CHAPTER 4 NDA-24298 Page 286 Issu e 1 ASTPN : Assignment of Si gnal T r ansla tion Pattern for NDM 3. Data Entry Instructi ons PNI appears when IC/OG=I is entered.
NDA-24298 CHAPTER 4 Page 287 Issue 1 ASTPN : Assignment of Signal T ranslation Pattern for NDM 4. Data Sheet (a) Inc omin g KIND OF ASSIGNMENT (IC/O G) I/O TENANT NUMBER (TN) LOGICAL RO UT E NUMBER (L.
CHAPTER 4 NDA-24298 Page 288 Issu e 1 ASTPN : Assignment of Si gnal T r ansla tion Pattern for NDM (b) Outgoi ng KIND OF ASSIGNMENT (IC/O G) I/O TENANT NUMBER (TN) LOGICAL RO UT E NUMBER (LGR T) 1-899.
NDA-24298 CHAPTER 4 Page 289 Issue 1 AOSP : Ass ignment of Outgo ing Selec tion Pattern A OSP: Assignment of Outgoing Selection P attern 1. General This co mmand assigns skip and additiona l digits informa tion for Ou tgoing Sele ction Translat ion Patter n Number (PNO).
CHAPTER 4 NDA-24298 Page 290 Issu e 1 AOSP : Assignment of Outgoing Selection Patte rn 4. Data Sheet OUTGOING SE LECTION TRANSLA TION P A TTERN N UMBER (PNO) 1 – 15 NUMBER OF DIGITS SKIPPED (SKIP) 0.
NDA-24298 CHAPTER 4 Page 291 Issue 1 AOSPL : Assignment of Outgoing Selection Patter n for LDM A OSPL: Assignment of Outgo ing Selection P attern f or LDM 1. General This co mmand assigns skip and additiona l digits informa tion for Ou tgoing Sele ction Translat ion Patter n Number (P NO).
CHAPTER 4 NDA-24298 Page 292 Issu e 1 AOSPL : Assignment o f Outgoing Selection Pattern for LDM 4. Data Sheet OUTGOING SELE CTION TRANSLA TIO N P A TTERN NUMBER (PNO) 1 – 15 NUMBER OF DIGITS SKIPPE .
NDA-24298 CHAPTER 4 Page 293 Issue 1 AOSPN : Assignment of Outgoing S election Patter n for NDM A OSPN: Assignment of Outgoing Select ion P attern for NDM 1. General This co mmand assigns skip and additiona l digits informa tion for Ou tgoing Sele ction Translat ion Patter n Numb er (PN O) in Fu sion Networ k.
CHAPTER 4 NDA-24298 Page 294 Issu e 1 AOSPN : Assignment of Outgoing S election Pattern for NDM 4. Data Sheet OUTGOING SELE CTION TRANSLA TIO N P A TTERN NUMBER (PNO) 1 – 15 NUMBER OF DIGITS SKIPPE .
NDA-24298 CHAPTER 4 Page 295 Issue 1 ACMO : Assignmen t of Clocked Manual Override A CMO: Assignment of Cloc ked Manual Override 1. General This command assigns the Cloc ked Manual Override da ta, which i s used for chang ing route s duri ng a spe cific day and sp ecific t ime per iod, such a s a hol iday (Mon th/Day/Hour /Minute ).
CHAPTER 4 NDA-24298 Page 296 Issu e 1 ACMO : Assignment of Clocked Manual Overr ide 4. Data Sheet BLOCK NUMBER (BLOCK) 0 – 7 P A TTERN NUMBER (PTN) 0 – 7 ST AR T END RE MARKS D A TE TIME D A TE TI.
NDA-24298 CHAPTER 4 Page 297 Issue 1 A TCP : Assignment of Time /Pattern Change Information Data A T CP: Assign ment of Time/P attern Chang e Information Data 1. General This comma nd assigns th e time peri od corresp onding to each Time of Day Change Pat tern Numbe r (TDPTN).
CHAPTER 4 NDA-24298 Page 298 Issu e 1 A TCP : Assignme nt of Time/Patt ern Change Information Data 4. Data Sheet Note 1: Assignmen t intervals must be at lea st 30 minutes. Note 2: The syst em f ills in any u nassigned time pat terns f or a 24- hour period.
NDA-24298 CHAPTER 4 Page 299 Issue 1 AFRS : Assignment of F lexible Route Select ion Data AFRS: Assignment of Flexible Route Selection Data 1. General This comma n d assi g ns the area an d/or offic e cod e data for th e re lat ed O P R . 2. Precautions 1.
CHAPTER 4 NDA-24298 Page 300 Issu e 1 AFRS : Assi gnment of Flexible Route Selection Data 3. Data Entry Instructi ons NPC is the Toll Distinctive Code (TDC), NPA and or NXX. This data can be a maximum of sixteen (16) digits. This data may include the access code for LCR/LCRS.
NDA-24298 CHAPTER 4 Page 301 Issue 1 AFRS : Assignment of F lexible Route Select ion Data 4. Data Sheet TENANT NUMBER (TN) ROU TE NUMBER (RT) NUMBER P A TTERN CODE (NPC) MAX.
CHAPTER 4 NDA-24298 Page 302 Issu e 1 AFRSL : Assignment of Flexible Route Se lection Data for LDM AFRSL: Assignment o f Fl exib le Route Selection Data f or LDM 1. General This comma nd assigns t he area and/or office cod e data for t he OPR assigned by the AOPRL command.
NDA-24298 CHAPTER 4 Page 303 Issue 1 AFRSL : Assignment of Flexible Route Selection Data for LDM 3. Data Entry Instructi ons NPC is the Toll Distinctive Code (TDC), NPA and or NXX. This data can be a maximum of sixteen (16) digits. This data may include the access code for LCR/LCRS.
CHAPTER 4 NDA-24298 Page 304 Issu e 1 AFRSL : Assignment of Flexible Route Se lection Data for LDM 4. Data Sheet TENANT NUMBER (TN) LOGICAL ROUTE NUMBER (LGRT) NUMBER P A TTERN CODE (NPC) MAX.
NDA-24298 CHAPTER 4 Page 305 Issue 1 AFRSN : Assignment of Flexi ble Route Selection Data for NDM AFRSN: Assignment of Fle xible Route Se lection Data f or NDM 1. General This command assigns t he area and/or of fice code data for the OPR ass igned by t he AOPRN command.
CHAPTER 4 NDA-24298 Page 306 Issu e 1 AFRSN : Assignment of Flexible Rout e Selection Data for NDM 3. Data Entry Instructi ons NPC is the Toll Distinctive Code (TDC), NPA and or NXX. This data can be a maximum of sixteen (16) digits.This data may include the access code for LCR/LCRS.
NDA-24298 CHAPTER 4 Page 307 Issue 1 AFRSN : Assignment of Flexi ble Route Selection Data for NDM 4. Data Sheet TENANT NUMBER (TN) LOGICAL ROUTE NUMBER (LGRT) 1-899 NUMBER P A TTERN CODE (NPC) MAX.
CHAPTER 4 NDA-24298 Page 308 Issu e 1 AOPR : Assignment of Outgoing Pa ttern Routing Data A OPR: Assignment of Ou tgoin g P a ttern Ro uting Data 1. General This command assi gns the LCR/ LCRS routing pattern for each Outgoin g Route Sel ection Pa ttern Rou ting (OPR ) nu mbe r.
NDA-24298 CHAPTER 4 Page 309 Issue 1 AOPR : Ass ignment of Outgoing Pattern Rout ing Data 3. Data Entry Instructi ons Enter OPR assigned by the AFRS command. OPR Enter the trunk route seizure order. RA 0 = Route advance ends (Last route) 1 = - E Enter the number of digits to be skipped from dialed numbers.
CHAPTER 4 NDA-24298 Page 310 Issu e 1 AOPR : Assignment of Outgoing Pa ttern Routing Data 4. Data Sheet TIME O F DA Y CHANGE P A TTERN (TDPTN) 0 – 7 OUTGOING ROU TE SELECTION P A TTERN NUMBER (OPR) .
NDA-24298 CHAPTER 4 Page 311 Issue 1 AOPRL : Assignment of Outgoing P attern Routing Data for LDM A OPRL: Assignment of Outgoi ng Patt ern Routin g Data f or LDM 1. General This command assi gns the LCR/ LCRS routing pattern for each Outgoin g Route Sel ection Pa ttern Rou ting (OPR) numb er.
CHAPTER 4 NDA-24298 Page 312 Issu e 1 AOPRL : Assignment of Out going Pattern Routing Data for LDM 3. Data Entry Instructi ons Enter OPR assigned by the AFRSL command. OPR Enter the trunk route seizure order. RA 0 = Route advance ends (Last route) 1 = - E Enter the number of digits to be skipped from dialed numbers.
NDA-24298 CHAPTER 4 Page 313 Issue 1 AOPRL : Assignment of Outgoing P attern Routing Data for LDM 4. Data Sheet TIME OF DA Y CHANGE P A TTERN (TDP TN) 0 – 7 OUTGOING RO UT E SELECTION P A T TERN NUM.
CHAPTER 4 NDA-24298 Page 314 Issu e 1 AOPRN : Assignment of Outgoing Pattern Routing Data for NDM A OPRN: Assignment of Ou tgoing P attern Routing Data for NDM 1. General This command assi gns the LCR/ LCRS routing pattern for each Outgoin g Route Sel ection Pa ttern Rou ting (OPR) number.
NDA-24298 CHAPTER 4 Page 315 Issue 1 AOPRN : Assign ment of Outgoing Pattern Rout ing Data for NDM 3. Data Entry Instructi ons Enter OPR assigned by the AFRSN command. OPR Enter the trunk route seizure order. RA 0 = Route advance ends (Last route) 1 = - E Enter the number of digits to be skipped from dialed numbers.
CHAPTER 4 NDA-24298 Page 316 Issu e 1 AOPRN : Assignment of Outgoing Pattern Routing Data for NDM 4. Data Sheet TIME OF DA Y CHANGE P A TTERN (TDP TN) 0 – 7 OUTGOING RO UT E SELECTION P A T TERN NUM.
NDA-24298 CHAPTER 4 Page 317 Issue 1 APIPL : Assignment of IP Address Data for LDM APIPL: Assignment of IP Address Data f or LDM 1. General This com mand is used to ass ign the IP addr ess to Poin t Code. Th is data is w ritten in th e Local Da ta Memory (LDM ).
CHAPTER 4 NDA-24298 Page 318 Issu e 1 APIPL : Assignment of IP Address Da ta for LDM 4. Data Sheet DESTINA TION POINT CODE (PC) 1-16367 P/S 0/1 TIMER 0-127 IP ADDRESS MAX.
NDA-24298 CHAPTER 4 Page 319 Issue 1 APIPN : Assignment of IP Address Data for NDM APIPN: Assignment of IP Address Data f or NDM 1. General This comma nd i s us ed t o as sign th e IP addr ess to Poin t Code .
CHAPTER 4 NDA-24298 Page 320 Issu e 1 APIPN : Assignment of IP Address Da ta for NDM 4. Data Sheet DESTINA TION POINT CODE (PC) 1-16367 P/S 0/1 TIMER 0-127 IP ADDRESS MAX.
NDA-24298 CHAPTER 4 Page 321 Issue 1 AADC : Assignment of Additional Digit T ranslation Data AADC: Assignment of Additional Digit T ranslation Data 1. General This command ass igns additi onal di git inf ormation f or Leas t Cost Routi ng (LCR). 2. Precautions 1.
CHAPTER 4 NDA-24298 Page 322 Issu e 1 AADC : Assignment of Additional Digit T ra nslation Da ta 4. Data Sheet P A TTERN N UMBER LOCA T ION (PNL) 1 – 999 ADDITIONAL DIGIT INFORMA TION (DC) MAX.
NDA-24298 CHAPTER 4 Page 323 Issue 1 AADCL : Assignment of Additional Digit T ransl ation Data for LDM AADCL: Assignmen t of Additional Digit T ranslation Data f or LDM 1. General This co mmand assigns addi tiona l digit inf ormation fo r Least Cost Routi ng (LCR) act ivating vi a Fusion Link.
CHAPTER 4 NDA-24298 Page 324 Issu e 1 AADCL : Assignment of Additional Digit T ranslation Data for LDM 4. Data Sheet P A TTERN NUMBER LOCA TI ON (PNL) 1 – 999 ADDITIONAL DIGIT INFO RMA TION (DC) MAX.
NDA-24298 CHAPTER 4 Page 325 Issue 1 AADCN : Assignment of Additional Digit T ranslation Data for NDM AADCN: Assignment of Additional D igit T ranslation Data f or NDM 1. General This comman d assigns addi tional di git infor mation fo r LCR (Least Cost Routi ng) activati ng via Fusion Li nk.
CHAPTER 4 NDA-24298 Page 326 Issu e 1 AADCN : Assignment of Additional Digit T ranslation Data for NDM 4. Data Sheet P A TTERN NUMBER LOCA TI ON (PNL) 1 – 999 ADDITIONAL DIGIT INFO RMA TION (DC) MAX.
NDA-24298 CHAPTER 4 Page 327 Issue 1 ASDC : Assignment of Six Digit Least Cost Routing Data ASDC: Assignment of Six Digit Least Cost Routing Data 1. General This comma nd is nece s sary w hen L C R six (6 ) d i git tr an slati on is re quired for FX Pref ix Cod es , MCI , SP R INT and o the r app lica ti ons.
CHAPTER 4 NDA-24298 Page 328 Issu e 1 ASDC : Assign ment of Six Digit Least Cost Rout ing Data 3. Data Entry Instructi ons 0 = PFX (Prefix) 1 = SCC (MCI, SPRINT) KIND Enter RA as the route advancing order Enter the office code RA OFFICE The details of this parameter are shown below.
NDA-24298 CHAPTER 4 Page 329 Issue 1 ASDC : Assignment of Six Digit Least Cost Routing Data 4. Data Sheet KIND OF SELE CTION (KIND) PFX/ SCC TIME OF DA Y CHANGE P A TTERN NUMBER (TDPTN ) 0 – 7 OUTGO.
CHAPTER 4 NDA-24298 Page 330 Issu e 1 ASDC : Assign ment of Six Digit Least Cost Rout ing Data Note: Designat ing Data (EFFECT) is assig ned in the squar e of the c orr esponding of f ice code . When Designa ting Data is no t assigne d, the d ata is “ 0.
NDA-24298 CHAPTER 4 Page 331 Issue 1 ASDCL : Assignment of Six Digit Least Cost Routing Data for LDM ASDCL: Assignment of Six Digit Least Cost Routing Data f or LDM 1. General This comma nd is nece s sary w hen L C R six (6 ) d i git tr an slati on is re quired for FX Pref ix Cod es , MCI , SP R INT and other applica tions.
CHAPTER 4 NDA-24298 Page 332 Issu e 1 ASDCL : Assignment of Six Digit Least Cost Routing Data for LDM 3. Data Entry Instructi ons 0 = PFX (Prefix) 1 = SCC (MCI, SPRINT) KIND Enter RA as the route advancing order Enter the office code RA OFFICE The details of this parameter are shown below.
NDA-24298 CHAPTER 4 Page 333 Issue 1 ASDCL : Assignment of Six Digit Least Cost Routing Data for LDM 4. Data Sheet KIND OF SELE CTION (KIND) PFX/ SCC TIME OF DA Y CHANGE P A TTERN NUMBER (TDPTN ) 0 .
CHAPTER 4 NDA-24298 Page 334 Issu e 1 ASDCL : Assignment of Six Digit Least Cost Routing Data for LDM Note: Designat ing Data (EFFECT) is assig ned in the squar e of the c orr esponding of f ice code . When Designa ting Data is no t assigne d, the d ata is “ 0.
NDA-24298 CHAPTER 4 Page 335 Issue 1 ASDCN : Assignment of Six Digit Least Cost Routing Data for NDM ASDCN: Assignment of Six Digit Least Cost Routing Data f o r ND M 1. General This comma nd is nece s sary w hen L C R six (6 ) d i git tr an slati on is re quired for FX Pref ix Cod es , MCI , SP R INT and other app lica tions.
CHAPTER 4 NDA-24298 Page 336 Issu e 1 ASDCN : Assignment of S ix Digit Least Cost Routing Data for NDM 3. Data Entry Instructi ons 0 = PFX (Prefix) 1 = SCC (MCI, SPRINT) KIND Enter RA as the route advancing order Enter the office code RA OFFICE The details of this parameter are shown below.
NDA-24298 CHAPTER 4 Page 337 Issue 1 ASDCN : Assignment of Six Digit Least Cost Routing Data for NDM 4. Data Sheet KIND OF SELE CTION (KIND) PFX/ SCC TIME OF DA Y CHANGE P A TTERN NUMBER (TDPTN ) 0 .
CHAPTER 4 NDA-24298 Page 338 Issu e 1 ASDCN : Assignment of S ix Digit Least Cost Routing Data for NDM Note: Designat ing Data (EFFECT) is assig ned in the squar e of the c orr esponding of f ice code . When Designa ting Data is no t assigne d, the d ata is “ 0.
NDA-24298 CHAPTER 4 Page 339 Issue 1 AUNE : Assignment of Uniform Numbering A UNE: Assignment of Uniform Numbering 1. General This command ass igns the dat a for an inte r- net work cal l term in ation . 2. Precautions 1. This comman d is av ailable f or both A CIS and CCIS.
CHAPTER 4 NDA-24298 Page 340 Issu e 1 AUNE : Assignment of Uniform Numbering 3. Data Entry Instructi ons Enter the dummy route number assigned by the ASPA command. Enter the appropriate number of digits to be omitted. Enter the office code of self node including LCR access code.
NDA-24298 CHAPTER 4 Page 341 Issue 1 AUNE : Assignment of Uniform Numbering 4. Data Sheet TENANT NUMBER (TN) OUTSIDE RO UT E NUMBER (RT) NUMBER P A TTERN CODE (NPC) MAXIMUM 12 D IGITS SKIP DA T A DIGI.
CHAPTER 4 NDA-24298 Page 342 Issu e 1 AUNEL : Assignment of Uniform Numbering for LDM A UNEL: Assignment of Unif orm Numberin g f or LDM 1. General This command ass igns the dat a for an inte r- net work cal l term in ation . 2. Precautions This command is av ai la ble fo r bot h ACIS and CCIS.
NDA-24298 CHAPTER 4 Page 343 Issue 1 AUNEL : Assignment of Uniform Numbering for LDM 3. Data Entry Instructi ons Enter the dummy route number assigned by the ASPAL command. Enter the appropriate number of digits to be omitted. Enter the office code of self node including LCR access code.
CHAPTER 4 NDA-24298 Page 344 Issu e 1 AUNEL : Assignment of Uniform Numbering for LDM 4. Data Sheet TENANT NUMBER (TN) LOGICAL RO UT E NUM BER (LGRT) NUMBER P A TTERN CODE (NPC) MAXI MUM 16 DIGIT S SK.
NDA-24298 CHAPTER 4 Page 345 Issue 1 ALDN : Assignment of Listed Direc tory Number ALDN: Assignment of Listed Direct ory Number 1. General This co mmand a ssigns the List ed Dir ector y Number (LDN) whi ch al lows a Dire ct I nward Di aling (DID) ca ll to termina te to Atte nda nt Consol es .
CHAPTER 4 NDA-24298 Page 346 Issu e 1 ALDN : Assign m en t of Listed Direct ory Number 4. Data Sheet TENANT NUMBER (TN) LISTED DIREC TO RY NUMBER (LDN) MAXI MUM 5 DI GIT S TYPE S TN DC MAXIMUM 8 DIGIT.
NDA-24298 CHAPTER 4 Page 347 Issue 1 ALDNN : Assignment of Listed Directory Number for ND M ALDNN: Assignmen t of Listed Directory Number f or NDM 1. General This command is u sed to as sign the Listed Di rectory Number (LDN) wh ich all ows a Direc t Inward Dialing (DID) ca ll to terminat e to Attendant Consoles within the Fus ion Ne twork.
CHAPTER 4 NDA-24298 Page 348 Issu e 1 ALDNN : Assignment of Listed Direc tory Number for NDM (b) TYPE = 1 (TELN) is s elected ; (c) TY P E = 2 (T o Outsid e ) is selec ted; 0 = No Night Transfer 1 = TELN 2 = To Outside 3 = ADC Enter desired DID number to terminate the call to Attendant Console in Day mode.
NDA-24298 CHAPTER 4 Page 349 Issue 1 ALDNN : Assignment of Listed Directory Number for ND M (d) T Y P E = 3 (ADC ) is sel ec ted; 0 = No Night Transfer 1 = TELN 2 = To Outside 3 = ADC Enter desired DID number to terminate the call to Attendant Console in Day mode.
CHAPTER 4 NDA-24298 Page 350 Issu e 1 ALDNN : Assignment of Listed Direc tory Number for NDM 4. Data Sheet (a) TY P E = 0 (No N i ght Transfe r) i s se lected ; (b) TYPE = 1 (TELN) is s elected ; USE R GROUP NUMBER OF LDN (L-UGN) TELEPHONE NUMBER OF LIS TED D IREC TO RY NU MBER (L-TELN) MAX.
NDA-24298 CHAPTER 4 Page 351 Issue 1 ALDNN : Assignment of Listed Directory Number for ND M (c) TY P E = 2 (T o Outsid e ) is selec ted; (d) T Y P E = 3 (ADC ) is sel ec ted; USER GROUP NUMBER OF LDN (L-UGN) TELEPHONE NUMBER OF LISTED DIREC TO RY NUMBER (L-TELN) MAX.
CHAPTER 4 NDA-24298 Page 352 Issu e 1 AISP : Assignment of Inc oming Selection Pattern AISP: Assignment of Incomi ng Selection P attern 1. General This comm and as sig ns addi tio nal dig its inf orma tion w ith r espec t to th e Inc oming Selec tio n Tra nslat ion Pa ttern Number (PNI) .
NDA-24298 CHAPTER 4 Page 353 Issue 1 AISP : Ass ignment of Inco ming Selection Pattern 4. Data Sheet INCOMING SELECTI ON TRANSLA T ION P A TTERN NUMBER (PNI) 1 – 15 ADDITIONAL DIGIT INFORMA TION (DC.
CHAPTER 4 NDA-24298 Page 354 Issu e 1 AISPL : Assignment of Incoming Sele ction Pattern Data for LDM AISPL: Assignment of Incomi ng Selection P attern Data f or LDM 1. General This command is used t o assign add itional digit s informati on with respe ct to the I ncoming Select ion Transla tion Patter n Number (PNI ).
NDA-24298 CHAPTER 4 Page 355 Issue 1 AISPL : Assignment of Incoming Sele ction Pattern Data for LDM 4. Data Sheet INCOMING SELECTI ON TRANSLA T ION P A TTERN NUMBER (PNI) 1 – 15 ADDITIONAL DIGIT INF.
CHAPTER 4 NDA-24298 Page 356 Issu e 1 AISPN : Assignment of Incoming Selection Pat tern Data for NDM AISPN: Assignment of Incomi ng Selection P atter n Data f or NDM 1. General This command is used t o assign add itional digit s informati on with respe ct to the I ncoming Select ion Transla tion Patter n Number (PNI).
NDA-24298 CHAPTER 4 Page 357 Issue 1 AISPN : Assignment of Incoming Selection Patter n Data for NDM 4. Data Sheet INCOMING SELECTI ON TRANSLA T ION P A TTERN NUMBER (PNI) 1 – 15 ADDITIONAL DIGIT INF.
CHAPTER 4 NDA-24298 Page 358 Issu e 1 ARAC : Assignment of Remote Acce ss C ode ARA C: Assignment of Remote Access Code 1. General This command is used when the syste m provides the Remote Acce ss to System service fea ture for a TIE line or DID line.
NDA-24298 CHAPTER 4 Page 359 Issue 1 ARAC : Assignment of Remote Acc ess Code 3. Data Entry Instructi ons TENANT NUMBER IC TRUNK (ICTN) KIND OF R/M (RM) ACCESS CODE (ACC) MAXIMUM 5 DIGITS TENANT NUMBER FOR AUTHORIZATION CODE (TN) REMARKS TN Enter the tenant number assigned by the AATC command.
CHAPTER 4 NDA-24298 Page 360 Issu e 1 ARAC : Assignment of Remote Acce ss C ode 4. Data Sheet TENANT NUMBER OF IC TR UNK (ICTN) A CCESS CODE (A CC) MAXIMUM 5 DIGITS KIND OF R/M (RM) TENANT NUMBER FOR .
NDA-24298 CHAPTER 4 Page 361 Issue 1 ARSC : Assign ment of Route Restriction Class ARSC: Assignment of Route Restriction Class 1. General This command assi gns route restri ction i nformati on acco rding to the Rou te Restric tion Clas s (RSC) of the stat io n and th e Rout e Numbe r (RT).
CHAPTER 4 NDA-24298 Page 362 Issu e 1 ARSC : Assignment of Route Restriction Class 3. Data Entry Instructi ons 11 1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 RRI-0 RRI-1 RRI-2 RRI-3 0 = IC Restriction via.
NDA-24298 CHAPTER 4 Page 363 Issue 1 ARSC : Assign ment of Route Restriction Class 4. Data Sheet D A Y/NIGHT MODE D/N TENANT NUMBER (TN) RO UT E NUMBER (RT) ROUTE RESTRICTION INDEX ROUTE RESTRICTION C.
CHAPTER 4 NDA-24298 Page 364 Issu e 1 ARSCN : Assignment of Rou te Restriction Class for NDM ARSCN: Assignment of Route Restriction Class f or NDM 1. General This command assi gns route restri ction i nformati on acco rding to the Rou te Restric tion Clas s (RSC) of the stati on and the Lo gical Rout e Number in t he Fusion n etwork.
NDA-24298 CHAPTER 4 Page 365 Issue 1 ARSCN : Assign ment of Route Restri ct ion Class for NDM 3. Data Entry Instructi ons 11 1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 RRI-0 RRI-1 RRI-2 RRI-3 0 = IC Restriction via ATT/STA 1 = IC Restriction Directly 2 = OG Restriction via ATT/STA 3 = OG Restriction Directly See Precaution 4 for more details.
CHAPTER 4 NDA-24298 Page 366 Issu e 1 ARSCN : Assignment of Rou te Restriction Class for NDM 4. Data Sheet D A Y/NIGHT MODE D/N TENANT NUMBER (TN) LOGICAL RO UT E NUMBER (LGR T ) 1-899 ROUTE RESTRICTI.
NDA-24298 CHAPTER 4 Page 367 Issue 1 ARRC : Assignment of Alternative Route Res triction ARRC: Assignment of Alternative Route Restriction 1. General This command is used to acc omplish trunk ta ndem connection. 2. Precautions 1. The ASTD command is also requi red to access tr unk ta ndem conne ctions incl udi ng C.
CHAPTER 4 NDA-24298 Page 368 Issu e 1 ARRC : Assignment of Alternative Route Restriction 4. Data Sheet INCOMING ROUTE NUMBER (ICR T) OUTGOING R OUTE NUMBER (OGRT) (A RI-A_RES) 0/1 (ARI-D_RES) 0 - 2 RE.
NDA-24298 CHAPTER 4 Page 369 Issue 1 ARRCN : Assignment of Alternative Route Res triction for NDM ARRCN: Assignment of Alternative Ro ute Restriction for NDM 1. General This command esta blishes trunk ta ndem conn ection ( Logical r oute to Logical r oute via the Fusi on net work).
CHAPTER 4 NDA-24298 Page 370 Issu e 1 ARRCN : Assignment of Alternative Route Res triction for NDM 4. Data Sheet INCOMING LOGICAL ROU TE NUM BER (ICLGRT) 1-899 OUTGOING L OGICAL ROUTE NUMBER (OGLGR T).
NDA-24298 CHAPTER 4 Page 371 Issue 1 A TDP : Assignme nt of T oll Code Restr iction Data A TDP: Assignment of Toll Code Restriction Data 1. General This comman d assigns the are a code of Toll Restric tion - 3/6 digit s for both an outgoi ng connec tion and a tandem con nection.
CHAPTER 4 NDA-24298 Page 372 Issu e 1 A TDP : Assign m en t o f T oll Code Restric tion Data (b) 6-Dig it T oll Restri ct ion 9 - 1 - NP A - Nxx - xx xx A 6-digit tol l re str iction is a restric tion that is to be e x e cuted by de veloping the content s (NP A - Nxx in th is cas e) of t he 6 dig its tha t follow th e to ll co de.
NDA-24298 CHAPTER 4 Page 373 Issue 1 A TDP : Assignme nt of T oll Code Restr iction Data 3. Data Entry Instructi ons ♦ Tandem Switching TANDEM/ OUTGOING CONNECTION (TDM/OG) DAY/NIGHT MODE (DAY/NIGHT) INCOMING ROUTE NUMBER (ICRT) OUTGOING ROUTE NUMBER (OGRT) DESTINATION (AREA) CODE (DC) MAX.
CHAPTER 4 NDA-24298 Page 374 Issu e 1 A TDP : Assign m en t o f T oll Code Restric tion Data 4. Data Sheet (a) T andem Connection (TDM/OG = T/O) T AND EM/ OUTGOING T/O DA Y / N I G H T MODE (D A Y/NIG.
NDA-24298 CHAPTER 4 Page 375 Issue 1 A TDP : Assignme nt of T oll Code Restr iction Data (b) Outgoing Co nnection (TDM/OG = 2 ) T ANDE M/ OUTGOING (TDM/OG) D A Y/NIGHT MODE (DA Y /NIG HT) 1/2 ROU TE RESTRICTION NUMBER (RSC) 0 – 15 OUTGOING RO UT E NUM BER (OGR T) DESTINA TION (AREA) CODE (DC) MAX.
CHAPTER 4 NDA-24298 Page 376 Issu e 1 A TDPL : Assignment of T o ll Code Restriction Da ta for LDM A TDPL: Assignment of Toll Code Restriction Data for LDM 1. General This comma nd assigns the area c ode of Toll Re stricti on - 3/6 di gits for a n outgoing c onnection .
NDA-24298 CHAPTER 4 Page 377 Issue 1 A TDPL : Assignment of T oll Code Re striction Data for LDM If data is set as follo ws, a toll cal l can be restr icted by de velop ing NP A - Nxx.
CHAPTER 4 NDA-24298 Page 378 Issu e 1 A TDPL : Assignment of T o ll Code Restriction Da ta for LDM 4. Data Sheet DA Y / N I G H T MODE (D A Y/N IGHT) D/N RO UT E RESTRICTION NUMBER (RSC) 0-15 OUTGOING LOGICAL ROU TE NUMBER (OGLGR T) 1-899 DESTINA TION (AREA) CODE (DC) MAX.
NDA-24298 CHAPTER 4 Page 379 Issue 1 A TDPN : Assignment of T oll Code Restriction Data for NDM A TDPN: Assignment of Toll Code Restriction Data for NDM 1. General This comman d assigns the are a code of Toll Restric tion - 3/6 digit s for both an outgoi ng connec tion and a tandem conne ction.
CHAPTER 4 NDA-24298 Page 380 Issu e 1 A TDPN : Assignmen t of T oll Code Restriction Data for NDM If data is set as follo ws, a toll cal l can be restr icted by de velop ing NP A - Nxx. • At T oll Code Restricti on Data (A TD PN) DC = 9-1 , TDI = 2, NND = 6 (NP A - Nxx) • At Area & Of f ice Code Data (AARPN) DC = NAP - Nxx (6 digi ts) 4.
NDA-24298 CHAPTER 4 Page 381 Issue 1 A TDPN : Assignment of T oll Code Restriction Data for NDM 3. Data Entry Instructi ons Tandem Switching TANDEM/ OUTGOING CONNECTION (TDM/OG) DAY/NIGHT MODE (DAY/NI.
CHAPTER 4 NDA-24298 Page 382 Issu e 1 A TDPN : Assignmen t of T oll Code Restriction Data for NDM 4. Data Sheet (a) T andem Connection (TDM/OG = T) T ANDE M/ OUTGOING T/O D A Y/NIGHT MODE (D A Y/N IGH.
NDA-24298 CHAPTER 4 Page 383 Issue 1 A TDPN : Assignment of T oll Code Restriction Data for NDM (b) Outgoing Co nnection (TDM/OG = O) T ANDEM/ OUTGOING (TDM/OG) D A Y/NIGHT MODE (D A Y/NIGHT) D/N ROU TE RESTRICTION NUMBER (RSC) 0-15 OUTGOING LOGICAL ROU TE NUMBER (OGLGR T) 1-899 DESTINA TION (AREA) CODE (DC) MAX.
CHAPTER 4 NDA-24298 Page 384 Issu e 1 AARP : Assignment of Area Code Restriction AARP: Assignment of Area Code Restriction 1. General This command assi gns the a rea/off ice code of Toll Restrict ion - 3/ 6 digits in conj unction with ATDP command. 2.
NDA-24298 CHAPTER 4 Page 385 Issue 1 AARP : Assignment of Area Code Restriction 4. Data Sheet OUTGOI NG ROUTE NUMBER (OGRT) ROU TE RESTRICTION CLASS (RSC) 0 -15 FLA G OF 3 OR 6 DIGITS (FLA G) 3 Digits/6 Di gits DESTINA TION (AREA/OFFICE) CODE (DC) MAX.
CHAPTER 4 NDA-24298 Page 386 Issu e 1 AARPL : Assignment of Area Code Restriction for LDM AARPL: Assignment of Area Code Restriction for LDM 1. General This command a ssigns the ar ea/office code of Toll Restr iction - 3/6 di gits for Fus ion service i n conjunctio n with ATDP L (fo r LD M)/A TDPN (for NDM ) com ma nd.
NDA-24298 CHAPTER 4 Page 387 Issue 1 AARPL : Assignment of Area Code Restric tion for LDM 4. Data Sheet OUTGOING LOGICAL ROUTE NUMBER (OG-LGR T) 1-899 ROUTE RESTRICTION CLASS (RSC) 0 -15 FLA G OF 3 OR 6 DIGITS (FLA G) 3 Digits /6 Digits DESTINA TION (AREA/OFFICE) CODE (DC) MAX.
CHAPTER 4 NDA-24298 Page 388 Issu e 1 AARPN : Assignment of Area Code Restriction for NDM AARPN: Assignment of Area Code R estriction for NDM 1. General This command a ssigns the ar ea/office code of Toll Restr iction - 3/6 di gits for Fus ion service i n conjunctio n with ATDP L (for LDM) /ATDPN (for NDM) comm and.
NDA-24298 CHAPTER 4 Page 389 Issue 1 AARPN : Assignment of Area Cod e Restriction for NDM 4. Data Sheet OUTGOING LOGICAL ROUTE NUMBER (OGLGR T) 1-899 ROUTE RESTRICTION CLASS (RSC) 0 -15 FLA G OF 3 OR 6 DIGITS (FLA G) 3 Digits /6 Digits DESTINA TION (AREA/OFFICE) CODE (DC) MAX.
CHAPTER 4 NDA-24298 Page 390 Issu e 1 APCR : Assignment of Primary Call Restriction Data APCR: Assignment of Primary Call Restriction Data 1. General This command assign s the restricted area code for LCR outgo ing cal l. 2. Precautions 1. The restri ction check b y this command is to be e xec uted pr ior to the ARSC / ATDP/AARP commands.
NDA-24298 CHAPTER 4 Page 391 Issue 1 APCR : Assignment of Primary Ca ll Restriction D ata 4. Data Sheet Note: Restric tion Data (RES) is assigne d in the squar es wher e BLOCK and RSC cr oss. When una ssigned, Restric tion Data is s et as “ 0 ” ( Restr icted St atus).
CHAPTER 4 NDA-24298 Page 392 Issu e 1 AEFR : Assignment of EP N Facility Restriction Data AEFR: Assignment of EPN F acility Restriction Data 1. General This command a ssigns t he allowabl e connect ions amon g the RSC1 (Cal ling Part y ’ s Rest rictio n Clas s) and RSC2 (Called Part y ’ s Restric tion Class) .
NDA-24298 CHAPTER 4 Page 393 Issue 1 AEFR : Assignment of EPN Facility Restric tion Data 3. Data Entry Instructi ons 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 1 2 3 4 Restriction Data (RES) is assigned in the squares where RSC1 and RSC2 cross.
CHAPTER 4 NDA-24298 Page 394 Issu e 1 AEFR : Assignment of EP N Facility Restriction Data 4. Data Sheet D A Y/NIGHT/ URGENT MODE D/N/U TENANT NUMBER (TN) F A CILITY RESTRICTION INDEX (FRI) 0 - 31 CALL.
NDA-24298 CHAPTER 4 Page 395 Issue 1 ASFC : Assign men t of Serv ice Feat ure Rest ri ctio n Clas s ASFC: Assignment of Service Feature Restriction Class 1. General This command ass igns the Se rvice Featur e Restri ction Class (SFC) for the Servi ce Feature Inde x (SFI) .
CHAPTER 4 NDA-24298 Page 396 Issu e 1 ASFC : Assignment of Serv ice F eatu re Restr ictio n Clas s 3. Data Entry Instructi ons T able 4-8 SF I SFI SER VICE FEA TURE 1 Out goin g T runk Que uing 2 Call.
NDA-24298 CHAPTER 4 Page 397 Issue 1 ASFC : Assign men t of Serv ice Feat ure Rest ri ctio n Clas s 14 System Message Detail Recording (SMDR) - T runk Basi s 15 - 16 Line Load Contro l 17-18 - 19 Indi.
CHAPTER 4 NDA-24298 Page 398 Issu e 1 ASFC : Assignment of Serv ice F eatu re Restr ictio n Clas s 51 Boss-Secretary Features 52 V oice Call using an Access Code 53 Message Reminder using an Acces s C.
NDA-24298 CHAPTER 4 Page 399 Issue 1 ASFC : Assign men t of Serv ice Feat ure Rest ri ctio n Clas s 94 Calling Party ’ s Number Disp lay Reject to ISDN Line 95 Direct IC Call Restriction (for A CD o.
CHAPTER 4 NDA-24298 Page 400 Issu e 1 ASFC : Assignment of Serv ice F eatu re Restr ictio n Clas s 140 Send W arning T one to int err upted parties when THREE-W A Y CALLING is establ ished us i ng Con.
NDA-24298 CHAPTER 4 Page 401 Issue 1 ASFC : Assign men t of Serv ice Feat ure Rest ri ctio n Clas s 4. Data Sheet DA Y / N I G H T MODE D/N TENANT NUMBER (TN) SER VICE FEA TU RE INDEX (SFI ) 1-255 SER.
CHAPTER 4 NDA-24298 Page 402 Issu e 1 ACFR : Assignment of Call Forwarding Restrict ion A CFR: Assignm ent of C all Forwarding Restriction 1. General This comma nd assigns var ious kinds of trunk call forwar ding restri ction data on a tenant b asis. 2.
NDA-24298 CHAPTER 4 Page 403 Issue 1 ACFR : Assignment of Call Forwarding Restriction 3. Data Entry Instructi ons 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 4 5 1 RESTRICTION DATA (RES ) is assigned in the squares where CCI and TSFI cross. 0 = Transfer service is restricted.
CHAPTER 4 NDA-24298 Page 404 Issu e 1 ACFR : Assignment of Call Forwarding Restrict ion 4. Data Sheet TENANT NUMBER (TN) TRANSFER SER VICE FEA TU RE INDEX (TSFI) 1 – 15 CALL CA TEGOR Y I N DEX (CCI).
NDA-24298 CHAPTER 4 Page 405 Issue 1 A TNR : Assignment of T enant Re striction Class Data A TNR: A ssignment of T enant Restriction Class Data 1. General This command assign s the tenant re st ri ction data for eac h ob je ctive si tuation. 2. Precautions 1.
CHAPTER 4 NDA-24298 Page 406 Issu e 1 A TNR : Assign ment of T enant Rest ri ction Clas s Da ta 3. Data Entry Instructi ons 1 2 3 4 5 6 7 8 9 1 01 11 21 31 41 5 OGTN Enter the OGTN DAY/NIGHT MODE D/N .
NDA-24298 CHAPTER 4 Page 407 Issue 1 A TNR : Assignment of T enant Re striction Class Data 4. Data Sheet D A Y/NIGHT MODE D/N ORIGINA TING TENANT (OGTN) TENANT RESTRICTION INDEX (TRI ) 0 - 15 TERMINA .
CHAPTER 4 NDA-24298 Page 408 Issu e 1 AABD : Assignment of Speed Calling Res triction Da ta AABD: Assignment of Speed Calling Restriction Data 1. General This comma nd as signs the Spe ed Ca lling system Restr ictio n Data .
NDA-24298 CHAPTER 4 Page 409 Issue 1 AABD : Assignment of Speed C alling Restriction Data 4. Data Sheet Note: Restric tion Data (RES) i s assi gned in the squar es wher e SFC and ADC cr oss.
CHAPTER 4 NDA-24298 Page 410 Issu e 1 ASDT : As signment of St ation Data ASDT: Assignment of Statio n Data 1. General This command assign s/delet es the phys ical st ati on dat a. 2. Precautions 1. This command is us ed for Bus iness app licatio n. The AAST/A GST commands are us ed for Hotel applica - tion.
NDA-24298 CHAPTER 4 Page 411 Issue 1 ASDT : Assignment of Stat ion Data Figure 4- 2 LENS LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3.
CHAPTER 4 NDA-24298 Page 412 Issu e 1 ASDT : As signment of St ation Data 3. Data Entry Instructi ons 1 3 0 0 0 0 0 0 1 2 0 12 1 1 Enter the station number with regard to the following: • The number of station number (STN) digits is designated by the ASYD command, SYS 1, INDEX 16.
NDA-24298 CHAPTER 4 Page 413 Issue 1 ASDT : Assignment of Stat ion Data 4. Data Sheet TENANT NUMBER (TN) ST A TION NUM BER (STN) LINE EQUIPMENT NUMBER (LENS) TELEPHONE EQUI PMEN T CLASS (TEC) 1 – 31.
CHAPTER 4 NDA-24298 Page 414 Issu e 1 ASTN : Assignment of Station Number ASTN: Assignment of Statio n Number 1. General This command cha nges the physical station number assigned to a p articular LEN.
NDA-24298 CHAPTER 4 Page 415 Issue 1 ASCL : Assignment of Station Class Data ASCL: Assignment of Station Class Data 1. General This comma nd changes the Telephone Equi pment Class ( TEC), Route Restric tion Class (RSC), and Servic e Feature Restri ction Cl ass (SFC), witho ut chan ging the st ation numb er.
CHAPTER 4 NDA-24298 Page 416 Issu e 1 ASCL : Assignment of Station Class Data 3. Data Entry Instructi ons 1 3 1 1 3 3 1 1 Enter RSC referring to the ARSC command.
NDA-24298 CHAPTER 4 Page 417 Issue 1 ASCL_T : As signment o f St at ion Class Dat a – T elephone Number ASCL_T : Assignment of Station Class Data – T elephone Number 1.
CHAPTER 4 NDA-24298 Page 418 Issu e 1 ASCL_T : Assi gnment of Stat io n Clas s Data – T elephone Number 3. D a ta En tr y I nstr uctio n Note: The e xis ting d ata can be r eadout b y pr essing “ Get ” b utton af ter UGN and TELN is ent er ed. USER GROUP NUMBER (UGN) TELEPHONE NUMBER (TELN) Max.
NDA-24298 CHAPTER 4 Page 419 Issue 1 ASCL_T : As signment o f St at ion Class Dat a – T elephone Number 4. Data Sheet USER GR OUP NUMBER (UGN ) TELEPHONE NUMBER (TELN) Max.
CHAPTER 4 NDA-24298 Page 420 Issu e 1 APHN : Assignment of Phantom Station Number Data APHN: Assignment of Ph antom Station Number Data 1. General This command assign s a phantom number for a sta tion. 2. Precautions 1. Numbers that are being used as stati on or LDN numbers cannot be use d as phantom number s.
NDA-24298 CHAPTER 4 Page 421 Issue 1 APHN : Assignment of Phantom Station Number Data 3. Data Entry Instructi ons REAL STATION NUMBER (REAL STN) HUNTING CONDITION OF PHANTOM NUMBER (PH) 0/1 TENANT NUM.
CHAPTER 4 NDA-24298 Page 422 Issu e 1 APHN : Assignment of Phantom Station Number Data 4. Data Sheet TENANT NUMBER (TN) REAL ST A TI ON NUMBER (REAL ST N ) PHAN T O M ST A TION NUM BER (PHST N) HUNTIN.
NDA-24298 CHAPTER 4 Page 423 Issue 1 APHNL : Assignment of Phantom Station Number for LDM APHNL: Assignment of Phantom Station Number f or LDM 1. General This command assign s Phantom Telephone Number (PHTELN) to Tele phon e Number of stations (TELN).
CHAPTER 4 NDA-24298 Page 424 Issu e 1 APHNL : Assignment of Phantom Station Number for LDM 4. Data Sheet MODE OF TELN OR PHTELN (MODE) UGN TELN PH PHTELN 1 PH PHTELN 2 PH PHTELN 3 PH PHTELN 4 PH PHTEL.
NDA-24298 CHAPTER 4 Page 425 Issue 1 APHNN : Assignment of Ph antom Station Number for NDM APHNN: Assignment of Phantom Station Number f or NDM 1. General This comman d assigns Phant om Telephone Number (PHTELN) to Tele phone Number of stat ions (TELN) in Fusion Network.
CHAPTER 4 NDA-24298 Page 426 Issu e 1 APHNN : Assignment of Phantom Station Number for NDM 4. Data Sheet MODE OF TELN OR PHTELN (MODE) UGN TELN PH PHTELN 1 PH PHTELN 2 PH PHTELN 3 PH PHTELN 4 PH PHTEL.
NDA-24298 CHAPTER 4 Page 427 Issue 1 ANDD : Assignment of Name Display Data ANDD: Assignment of Name Display Data 1. General This comma nd assig ns use r inform ation ( user ’ s name) onto a Sta tion to progr am the Name Display - Syst em serv ice feat ure.
CHAPTER 4 NDA-24298 Page 428 Issu e 1 ANDD : Assignment of Name Dis play Data 4. Data Sheet TENANT NUMBER (TN) ST A TION NUMBER (STN) IDENTIFYI NG INFORMA TION (NAME) 8 or 16 CHARA CTERS REMARKS.
NDA-24298 CHAPTER 4 Page 429 Issue 1 ANDD_T : Assignment of Name Display Data – T elephone Number ANDD_T : Assignment of Name D isplay Data – Telephone Number 1. General This command is us ed to assign user i nformat ion (user ’ s name) onto a Station to pr ogram the Na me Display - System se rvice feat ure.
CHAPTER 4 NDA-24298 Page 430 Issu e 1 ANDD_T : Assignment of Name Display Data – T elephone Number 4. Data Sheet USER GR OUP NUMBER (UGN ) TELEPHONE NUMBER (TELN) Max.
NDA-24298 CHAPTER 4 Page 431 Issue 1 ALGNL : Assignment of T elephone Number Data for LDM ALGNL: Assignment o f T elephone Nu mber Data f or LDM 1. General This command assi gns the indi vidual a ttendant identifica tion number (T elep hone Number) available in the self (local ) node o nly.
CHAPTER 4 NDA-24298 Page 432 Issu e 1 ALGNL : Assignment of T elephone Number Data for LDM 4. Data Sheet USER GROUP NUMBER (UGN) TELEPHONE S T ATION NUMBER (TELN) MAX.
NDA-24298 CHAPTER 4 Page 433 Issue 1 ALGSL : All o cat ion of Telephone Station Da t a f or L DM ALGSL: Allocatio n of T elepho ne Station Data f or LDM 1. General This command assigns the data pertaini ng to the r elations hip be tween Te lephone St ation Number (TELN) a nd the ph ysic al stat io n .
CHAPTER 4 NDA-24298 Page 434 Issu e 1 ALGSL : Allocation of T elephone Station Data for LDM 3. Data Entry Instructi ons TELEPHONE STATION NUMBER (TELN) MAX.
NDA-24298 CHAPTER 4 Page 435 Issue 1 ALGSL : All o cat ion of Telephone Station Da t a f or L DM 4. Data Sheet (a) TYPE = 1 (LENS i s used to s pecify th e physic al stati on number .
CHAPTER 4 NDA-24298 Page 436 Issu e 1 ALGSL : Allocation of T elephone Station Data for LDM (b) TYPE = 2 (STN is used to specify the ph ysical stati on number .
NDA-24298 CHAPTER 4 Page 437 Issue 1 AKYD : Assignment of Key Data for Dterm AKYD: Assignment of Ke y Data f or D term 1. General This command assign s the fol lowing key d ata correspo nding to ea ch line/ feature button on a D term . • Line K e y Data • Function K ey Data • Interc om K e y Data • DSS K e y Data 2.
CHAPTER 4 NDA-24298 Page 438 Issu e 1 AKYD : Assignment of Key Da ta for Dterm 5. A virtu al line can be ass igned as a Sub L ine of t he D term . The vi rt ual line can be use d the sa me w ay as th e My Line for outgoi ng calls and oth er servi ce operat ions.
NDA-24298 CHAPTER 4 Page 439 Issue 1 AKYD : Assignment of Key Data for Dterm 9. The applicable tenant nu mber (TN) ran ge is desi gna ted by the ASYD command, SYS1, INDEX8. 10. There is no defaul t k ey data pro vided for D te rm (8-button ty pe). The ke y data for all th e line/ featu re bu ttons must be programmed.
CHAPTER 4 NDA-24298 Page 440 Issu e 1 AKYD : Assignment of Key Da ta for Dterm 12. When usin g 16 ELCJ (SR 3295, PR OG-B or later) , the FKY = 49: Speed Calling- One T ouch can be assigne d to a maximum of 16 K ey Numbers (KYNS). Note 1: Speed Callin g-One T ouch data can be s a ved by the BOSD com mand.
NDA-24298 CHAPTER 4 Page 441 Issue 1 AKYD : Assignment of Key Data for Dterm Figure 4-3 D ter m Series III (24-But ton T ype) Figure 4-4 D ter m Series III (16-But ton T ype) HOLD TRF ANS SPKR 0 OPER .
CHAPTER 4 NDA-24298 Page 442 Issu e 1 AKYD : Assignment of Key Da ta for Dterm Figure 4-5 D term Se ries III (8-Button T ype) HOLD TRF ANS SPKR 0 OPER # LINE /SPD 7 PQRS 8 TUV 9 WXYD CNF 4 GHI 5 JKL 6.
NDA-24298 CHAPTER 4 Page 443 Issue 1 AKYD : Assignment of Key Data for Dterm Figure 4-6 D term Se ries E (8-Button T yp e without LCD) Figure 4-7 D term Series E (8-Button T ype with LCD) 1 2 3 4 5 6 7 8 9 0 # 4 Feature Key No.
CHAPTER 4 NDA-24298 Page 444 Issu e 1 AKYD : Assignment of Key Da ta for Dterm Figu re 4- 8 D te rm Series E (16-Bu tton T ype) Figu re 4- 9 D te rm Series E (32-Bu tton T ype) 1 2 3 4 5 6 7 8 9 0 # 4 Feature 1 Key No.
NDA-24298 CHAPTER 4 Page 445 Issue 1 AKYD : Assignment of Key Data for Dterm Figure 4-10 Key N umber A ppearance of D term Series E 32 26 25 28 27 30 29 31 EXIT HELP 16 12 5 4 3 2 71 1 10 9 8 18 13 17.
CHAPTER 4 NDA-24298 Page 446 Issu e 1 AKYD : Assignment of Key Da ta for Dterm 3. Data Entry Instructi ons LN PRE 0 = Prime Line pickup 1 = Customize (Line Preference data are to be set for the other .
NDA-24298 CHAPTER 4 Page 447 Issue 1 AKYD : Assignment of Key Data for Dterm FKY KEY NUMBER (KYN) SERVICE CONDITION (KYI) 0-2 MULTI LINE RING INFORMATION FOR EACH LINE (RG) INTERCOM KIND OF INCOM (ICM) 0-2 GROUP ID NUMBER (G-ID) 1-50 FEATURE KEY CODE (FKY) KIND OF LINE (KD) 0-2 STATION NUMBER (STN) TENANT NUMBER (TN) See the Table 4-12.
CHAPTER 4 NDA-24298 Page 448 Issu e 1 AKYD : Assignment of Key Da ta for Dterm T able 4-12 FKY 1 2 3 4 5 6 7 8 10 11 12 13 14 15 16 17 18 19 20 21 22 23-25 Call Forwarding-Busy Line Call Forwarding-Al.
NDA-24298 CHAPTER 4 Page 449 Issue 1 AKYD : Assignment of Key Data for Dterm 4. Data Sheet (a) When KD = 0/ 1 (for k e y assign ment of L ine k ey/ Intercom k ey ) T abl e 4- 13 RG RG (0-7) RINGING DELA Y TIME D A Y NIGHT 0 NO (No Ringing ) No Ringing 1 YES (Ri nging ) No Ringing 0 sec.
CHAPTER 4 NDA-24298 Page 450 Issu e 1 AKYD : Assignment of Key Da ta for Dterm 14 15 16 17 18 19 20 21 22 23 24 25 26 MY L INE TENANT NUMBER (TN) ST A TION NUM BER (STN) PRIORITY OF ANSWERING CALL (PR.
NDA-24298 CHAPTER 4 Page 451 Issue 1 AKYD : Assignment of Key Data for Dterm Note 1: When KYI = None , it is n ot neces s ary to assign any data. Note 2: When KYI = FUN CTION, assig n data for F KY onl y. Note 3: When KYI = Multi-Line, assign data for multiple tel ephone only .
CHAPTER 4 NDA-24298 Page 452 Issu e 1 AKYD : Assignment of Key Da ta for Dterm (b) When KD = 2 (for ke y ass ig nment of DSS Console ). KEY NUMBER TE NANT NUMBER (TN) ST A TION NUM BER (STN) 1 2 3 4 5.
NDA-24298 CHAPTER 4 Page 453 Issue 1 AKYD_T : Assignment of Key Data for D term – T elephone Number AKYD_T: Assignment of Ke y Data f or D term – T elephone Nu mber 1. General This command a ssigns th e Line Key , Function Key , Inter com Key, and DSS Key d ata corre sponding t o each line/f eature but ton on a D term .
CHAPTER 4 NDA-24298 Page 454 Issu e 1 AKYD_T : Assignment of Key Data for Dterm – T e lephone Number 7. A Multi-Line k ey (the k ey for My L ine and Sub Line ) on th e D term can be a ssigned a s Prim e Line. I f the Pri me Line is not assi gned , the My Line serves as the Pr ime L ine.
NDA-24298 CHAPTER 4 Page 455 Issue 1 AKYD_T : Assignment of Key Data for D term – T elephone Number 12. The ap pli ca ble tenant number (TN) ran ge is designate d by the ASYD command, SYS1, INDEX8. 13. There is no defaul t k ey data pro vided for D te rm (8-button ty pe).
CHAPTER 4 NDA-24298 Page 456 Issu e 1 AKYD_T : Assignment of Key Data for Dterm – T e lephone Number 16. F or Call F orwar ding-Bu sy Line and Cal l Forw arding- Don ’ t An swer, refer to ASYD SYS1 Index5 (sepa rat e/comm on a cces s for C.F .-Busy Line and C.
NDA-24298 CHAPTER 4 Page 457 Issue 1 AKYD_T : Assignment of Key Data for D term – T elephone Number 3. Data Entry Instructi ons LN PRE 0 = Prime Line pickup 1 = Customize (Line Preference data are t.
CHAPTER 4 NDA-24298 Page 458 Issu e 1 AKYD_T : Assignment of Key Data for Dterm – T e lephone Number Note: The existing data can be readout by pressing "Get ” button after UGN and TELN data is entered. • F or the Line/ Feature k e ys • For the F lex keys Enter unique number for each Intercom group within the range from 1 to 50.
NDA-24298 CHAPTER 4 Page 459 Issue 1 AKYD_T : Assignment of Key Data for D term – T elephone Number T able 4-16 FKY T abl e 4- 17 RG RG (0-7) RINGING DELA Y TIME DA Y N I G HT 0 NO (No Ringing ) No Ringing 1 YES (Ri nging ) No Ringing 0 sec. 2 NO (No Ringing ) Ringing 0 sec.
CHAPTER 4 NDA-24298 Page 460 Issu e 1 AKYD_T : Assignment of Key Data for Dterm – T e lephone Number 4. Data Sheet (a) When KD = 0/1 (for Ke y assignment of Line ke y/In te rcom ke y) MY LINE USER G.
NDA-24298 CHAPTER 4 Page 461 Issue 1 AKYD_T : Assignment of Key Data for D term – T elephone Number Note 1: When KYI = None, it is not nec essary to assign an y data. Note 2: When KYI = FUNCTION, a ssign d ata for FKY only . Note 3: When KYI = Multi-Li ne, assi gn data for mul tiple tele phone on ly .
CHAPTER 4 NDA-24298 Page 462 Issu e 1 AKYD_T : Assignment of Key Data for Dterm – T e lephone Number (b) When KD = 2 (for ke y ass ig nment of DSS Console ).
NDA-24298 CHAPTER 4 Page 463 Issue 1 AFDD : Assignment of Function Display Data AFDD: Assignment of Function Disp la y Data 1. General This command assign s the c haracter s of soft key in dicatio n on a D term Ser ies E. When thi s command i s not a ssigned, th e def ault (whic h shows on FKY paramet er desc ription on this command) is disp layed.
CHAPTER 4 NDA-24298 Page 464 Issu e 1 AFDD : Assignment of Function Display Data 3. Data Entry Instructi ons DISP DISP REMARKS 26 The soft key indication is displayed when DISP has assigned by the AFDD command.
NDA-24298 CHAPTER 4 Page 465 Issue 1 AFDD : Assignment of Function Display Data 4. Data Sheet FUNCTION KEY CODE (FKY) DISP LA Y MESSAGE ON LCD (DISP) REMARKS FUNCTION KEY CODE (FKY) DISPLA Y MESSAGE O.
CHAPTER 4 NDA-24298 Page 466 Issu e 1 ADSL : Assignment of Dterm Soft Key on LCD ADSL: Assignment of D term Soft K ey on LCD 1. General This command creat es an additional soft key pattern for D te rm Series E. 2. Precautions 1. Four s oft ke ys a ppear on a D term Series E, and each soft ke y has four page s.
NDA-24298 CHAPTER 4 Page 467 Issue 1 ADSL : Assignment of Dterm Soft Key on LCD 5. After system init ia lizati on is performe d, the soft k e y cann ot be used for a minute. 6. When the soft ke y data i s set on a system b asis, SKP = 0 is a ssigned by this command.
CHAPTER 4 NDA-24298 Page 468 Issu e 1 ADSL : Assignment of Dterm Soft Key on LCD 3. Data Entry Instructi ons DISP DISP SOFT KEY PATTERN (SKP) 0-15 STATUS NUMBER (SN) 0-15 FUNCTION KEY DATA (FKY) 1-320 26 12 2 3 1 The soft key indication is displayed when DISP has assigned by the AFDD command.
NDA-24298 CHAPTER 4 Page 469 Issue 1 ADSL : Assignment of Dterm Soft Key on LCD 4. Data Sheet SOFT KEY PAT T E R N (SKP) ST A TUS NUMBER (SN) SK N FUNCTION KEY D A T A (FKY) DISP REM ARKS 1 2 3 4 5 6 .
CHAPTER 4 NDA-24298 Page 470 Issu e 1 ADKS : Ass ignment of Dterm Key Status Data ADKS: Assignment of D term Ke y Status Data 1. General This comma nd assigns t he soft key pat tern (whic h is assigne d by the ADSL command) ont o a D ter m Series E.
NDA-24298 CHAPTER 4 Page 471 Issue 1 ADKS : Assignment o f Dterm Key Status Data 4. The def ault k e y patt ern (SKP = 0) of the sof t ke ys a re li sted in the t able belo w . When data 1 through 15 is assigne d in th e SKP paramete r , the ADSL comman d must be ass igned t o specif y the soft ke y patt ern (SKP) .
CHAPTER 4 NDA-24298 Page 472 Issu e 1 ADKS : Ass ignment of Dterm Key Status Data 3-P arty Conference 0 MIC >>> MIC 1 2 3 Others 0 MIC >>> MIC 1 2 3 T able 4-18 Default Ke y P attern.
NDA-24298 CHAPTER 4 Page 473 Issue 1 ADKS : Assignment o f Dterm Key Status Data 5. Three dif fer ent kinds of Line/Feat ure b utton s and DSS k ey arr angements c an be specif ied by LKP parame ter .
CHAPTER 4 NDA-24298 Page 474 Issu e 1 ADKS : Ass ignment of Dterm Key Status Data 3. Data Entry Instructi ons 1 2 5 6 4 5 0 1 0 Select a Line/Feature button and DSS key arrangement 1 = 16 Line/Feature.
NDA-24298 CHAPTER 4 Page 475 Issue 1 ADKS : Assignment o f Dterm Key Status Data 4. Data Sheet TENANT NUMBER (TN) ST A TION NUMBER (ST A) SOFT KEY P A TTERN DA T A (SKP) LINE KEY P A TTERN D A T A (LK.
CHAPTER 4 NDA-24298 Page 476 Issu e 1 ADRTL : Assignment of Dt erm Display Route Data for LDM ADRTL: Assignment of D term Display Route Data for LDM 1. General This comman d changes the dis play of trunk cl ass informa tion on the D term instea d of the Trunk Class ( TCL) designa tion of the ARTD command.
NDA-24298 CHAPTER 4 Page 477 Issue 1 ADRTL : Ass ignment of Dterm Display Route Data for LDM 4. Data Sheet RO UT E NUMBER (RT) CHARA CTER DISPLA Y T YPE (TYPE) 1, 2 DISPL A Y FOR TR UNK CLASS ON D ter.
CHAPTER 4 NDA-24298 Page 478 Issu e 1 ADRTN : Assignment of Dterm Display Route Data for NDM ADRTN: Assignment of D term Display Route Data for NDM 1. General This comman d changes the dis play of trunk cl ass informa tion on the D term instea d of the Trunk Class ( TCL) designa tion of the ARTD command.
NDA-24298 CHAPTER 4 Page 479 Issue 1 ADRTN : Assignment of Dterm Display Route Data for NDM 4. Data Sheet LOGICA L R OUTE NUMBER (LGRT) 1-899 CHARA CTER DISPLA Y T YPE (TYPE) 1, 2 DISPL A Y FOR TR UNK.
CHAPTER 4 NDA-24298 Page 480 Issu e 1 AICD : Assignment of Inter com Data AICD: Assignment of Inter com Data 1. General This command ass igns the d ata re lated t o the Autom atic/Annu al Int ercom serv ice f eature. 2. Precautions 1. Up to 16 sta tio ns may be as sign ed to one Inte r com g roup.
NDA-24298 CHAPTER 4 Page 481 Issue 1 AICD : Assignment of Intercom Data 3. Data Entry Instructi ons Enter the Module Group number of the Intercom group. MG No. 0 = Automatic Intercom 1 = Manual Intercom A/M Enter the Tenant Number of the Intercom group.
CHAPTER 4 NDA-24298 Page 482 Issu e 1 AICD : Assignment of Inter com Data 4. Data Sheet MODU LE GR OUP NUMBER (MG No.) GR OUP ID NUMBER (G-ID) 1-50 A UTO/MANU AL SIGNALING (A/M) 0/1 BRIDGE CALL RESTRICTION (BCR) 0/1 TENANT NUMBER (TN) NO .
NDA-24298 CHAPTER 4 Page 483 Issue 1 AICD_T : Assignment of Interc om Data – T elephone Number AICD_T : Assignment of Inter com Data – T elephone Number 1. General This comm and i s used to ass ign th e da ta rela ted t o the Au tomati c/Ma nual Inte rcom serv ice fe ature .
CHAPTER 4 NDA-24298 Page 484 Issu e 1 AICD_T : Assignment of Intercom Data – T elephone Number 3. Data Entry Instructi ons Note 1: The e xis ting d ata can be r eadout b y pr essing “ Get ” b utton after MG No.
NDA-24298 CHAPTER 4 Page 485 Issue 1 AICD_T : Assignment of Interc om Data – T elephone Number 4. Data Sheet MODULE GR OUP NUMBER (MG No.) 00-07 GR OUP ID NUMBER (G-ID) 1-50 A UT O/MANU AL SIGNALING (A/M) BRIDGE CALL RESTRICTION (BCR) TENANT NUMBER (TN) CNT USER GR OUP NUMBER (UGN ) ICMCT TELEPHONE NUMBER OF INT ERCOM ST A TION (ICM TELN) Max.
CHAPTER 4 NDA-24298 Page 486 Issu e 1 ADIM : Assignment of Dial Intercom Data ADIM: Assignment of Dial Intercom Data 1. General This command ass igns Dial Int er com servic e related data .
NDA-24298 CHAPTER 4 Page 487 Issue 1 ADIM : Assig n men t of Dial Intercom Data 4. Data Sheet (a) Dia l Inte rcom Digi t Number : One dig it (N = 0) MODUL E GR OUP NUMBER (MG No.
CHAPTER 4 NDA-24298 Page 488 Issu e 1 ADIM : Assignment of Dial Intercom Data (b) D ial Inte rcom Digi ts N umber : T wo digi ts (N = 1) MODULE GROUP NUMBER (MG N o.
NDA-24298 CHAPTER 4 Page 489 Issue 1 ADIM_T : Assignment of Dial Intercom Data – T e lephone Number ADIM_T : Assignment of Dial In ter com Data – Telephone Number 1. General This command is used to assign Dia l Int er com ser vic e r elated d at a.
CHAPTER 4 NDA-24298 Page 490 Issu e 1 ADIM_T : Assignment of Dial Intercom Data – T elephon e Number 3. Data Entry Instructi ons Note: The e xis ting data can be r eadout by pr essing “ Ge t ” b utton after UGN and TELN dat a is ente r ed. NUMBER OF INTERCOM STATION (ICMCT) NUMBER OF INTERCOM STATION (ICMCT) MODULE GROUP NUMBER (MG No.
NDA-24298 CHAPTER 4 Page 491 Issue 1 ADIM_T : Assignment of Dial Intercom Data – T e lephone Number 4. Data Sheet (a) Dia l Inte rcom Digit N umber : N = One d igit (0 -9) Dia l In terco m ST N MODULE GR OUP NUMBER (MG No.
CHAPTER 4 NDA-24298 Page 492 Issu e 1 ADIM_T : Assignment of Dial Intercom Data – T elephon e Number (b) Dial Intercom Digi ts Number: N = T wo digits (00-63) Dial Intercom STN MODULE GR OUP NUMBER (MG No.
NDA-24298 CHAPTER 4 Page 493 Issue 1 AIZP : Assignment of Internal Zone P aging Data AIZP: Assignm ent o f In ternal Zone P aging Data 1. General This command assign s Intern al Zone Pagi ng group dat a. If the designat ed group number has a lready bee n assigne d, the current dat a is displaye d.
CHAPTER 4 NDA-24298 Page 494 Issu e 1 AIZP : Assignment of Inte rnal Zone Paging Dat a 4. Data Entry Instructi ons TENANT NUMBER (TN) INTERNAL ZONE P A GING GR OUP (IZPG) 1-99 NUMBER OF ST A TIONS (CN.
NDA-24298 CHAPTER 4 Page 495 Issue 1 AIZPN : Assignment of Internal Zone Paging Data for NDM AIZPN: Assignment of Internal Zone P aging Data f or NDM 1.
CHAPTER 4 NDA-24298 Page 496 Issu e 1 AIZPN : Assignment of Internal Zone Pa ging Data for NDM 4. Data Sheet NETWO RK INTERNAL ZONE P A GING GR OUP ID (NIZPG) 1-255 UGN TELEPHONE NUMBER (TE LN) MAX.
NDA-24298 CHAPTER 4 Page 497 Issue 1 AHLS : Assignment of Hot Line Station AHLS: Assignment of Hot L ine Station 1. General This command ass igns t he data re lated t o the Hot Line s ervice feat ure. 2. Precautions 1. Prior to assigni ng this command , the Hot Line st ation shoul d be gi v en the TEC = 14 (Hot Line class) by the ASDT/AAST command.
CHAPTER 4 NDA-24298 Page 498 Issu e 1 AHLS : Ass ignment of Hot Line Station 4. Data Sheet (a) Connection T ype: Stati on (T ype = 1) HO TLINE TENANT NUMBER (HOT TN) HO TLINE ST A TION NUMBE R (STN) T.
NDA-24298 CHAPTER 4 Page 499 Issue 1 AHLS : Assignment of Hot Line Station (b) Connection T ype: Abbre viated Digit Code (ADC) ( T ype = 2) HO TLINE TENANT NUMBER (HOT TN) HO TLINE ST A TION NUMBE R (STN) TYPE DESTINA TION ST A TI ON ’ S TENANT NUM BER (CON TN) SPEED CA LLING CODE (ADC) MAX.
CHAPTER 4 NDA-24298 Page 500 Issu e 1 AHLS : Ass ignment of Hot Line Station (c) Connection T ype: T runk Lin e Appearance (T ype = 3) HO TLINE TENANT NUMBER (HO T TN) HO TLINE ST A TION NUMBER (STN) .
NDA-24298 CHAPTER 4 Page 501 Issue 1 AHLSN : Assignment of Hot Line Station for NDM AHLSN: Assignment o f Hot Line Statio n for NDM 1. General This command a ssigns th e data related to the Hot Li ne servic e featur e.
CHAPTER 4 NDA-24298 Page 502 Issu e 1 AHLSN : Assignment of Hot Line Station for NDM 4. Data Sheet (a) Connection T ype: Stati on (T ype = 1) HO TLINE USER GROUP NUM BER (HO T UGN) HO TLINE TELEPHONE NUMBER (HO T TELN) MAX.
NDA-24298 CHAPTER 4 Page 503 Issue 1 AHLSN : Assignment of Hot Line Station for NDM (b) Connection T ype: Abbre viated Digit Code (ADC) ( T ype = 2) HO TLINE USER GR OUP NUMBER (HO T UGN) HO TLINE TELEPHONE NUMBER (HO T TELN) TYPE DESTINA TION ’ S USER GR OUP NUMBER (CON UGN) SPEED C ALLING CODE (ADC) MAX.
CHAPTER 4 NDA-24298 Page 504 Issu e 1 AHLSN : Assignment of Hot Line Station for NDM (c) Connection T ype: T runk Lin e Appearance (T ype = 3) HO TLINE USER GROUP NUMBER (HO T UGN) HO TLINE TELEPH ONE.
NDA-24298 CHAPTER 4 Page 505 Issue 1 ADA1_T : Assignment of DTE Attribute Data 1 – T elephone Number AD A1_T : Assignment of DTE Attrib ute Data 1 – T elephone Num ber 1. General This comm and is used to as sig n and d elete Attr ibute Data 1 for each term inal ( DTE ).
CHAPTER 4 NDA-24298 Page 506 Issu e 1 ADA1_T : Assignment of DTE Attribute Data 1 – T elephone Number 4. Data Sheet Note: The ex is ting data can be r eadou t by pr essing “ Get ” but ton af ter UGN and TELN is enter ed. CDN User Gr oup Number (UGN) T elephone Nu mber (TELN) Max.
NDA-24298 CHAPTER 4 Page 507 Issue 1 ADA2 : Assignment of DTE Attribute Data 2 AD A2: Assignment of DTE Attribute Data 2 1. General This co mmand a ss igns the Attribu te Dat a for the d ata communica tio n ser vi ce feature o f the Data Adapte r (DA) with the D te rm and/or the Data Module (DM).
CHAPTER 4 NDA-24298 Page 508 Issu e 1 ADA2 : Assignment of DTE Att ribute Data 2 4. Data Sheet CDN TENANT NU MBER (TN) STATION NUMBER FUNCTION (STN) 1 DTR (ER) CON TR OL (DTR) 0 = Check 1 = No Check 2 A UTO ANSWER (A UTO) 0 = Manual Answer 1= A u t o A n s w e r 3 MODEM No.
NDA-24298 CHAPTER 4 Page 509 Issue 1 ADA2 : Assignment of DTE Attribute Data 2 10 APPLICA TION CODE (CODE) 0 = No Character 1 = ASC II (7-bit) Even Parity 2 = ASC II (7-bit) Od d P arity 3 = ASC II (7.
CHAPTER 4 NDA-24298 Page 510 Issu e 1 ADA2_T : Assignment of DTE Attribute Data 2 – T elephone Number AD A2_T : Assignment of DTE Attrib ute Data 2 – T elephone Num ber 1.
NDA-24298 CHAPTER 4 Page 511 Issue 1 ADA2_T : Assignment of DTE Attribute Data 2 – T elephone Number 4. Data Sheet Note: The ex is ting data can be r eadou t by pr essing “ Get ” but ton af ter UGN and TELN is enter ed. CDN User Gr oup Number (UGN) T elephone Number (TELN) Max.
CHAPTER 4 NDA-24298 Page 512 Issu e 1 ADA2_T : Assignment of DTE Attribute Data 2 – T elephone Number CDN User Gr oup Number (UGN) T elephone Number (TELN) Max.
NDA-24298 CHAPTER 4 Page 513 Issue 1 AFCD : Assignmen t of Fixed Connection-Nailed Down Connection-Data AFCD: Assignment of Fixed Connection-Nailed Down Connection-Data 1. General This command assign s (connect link), d eletes (re lease link) , and disp lays the data (linked LENS) pe rtaining to Fixed Conne ctions (Nail ed Down Connectio ns).
CHAPTER 4 NDA-24298 Page 514 Issu e 1 AFCD : Assignment of Fixed Connection-Nailed Down Connection-Data Note 1: When DTI is use d for Data Commun ication, P ad Data must be “ 7 ” (bi nary 111). Note 2: When bit stea ling (si gnaling bit) is us ed in DTI, s ignal ing bit ( CD R S bit) is lost.
NDA-24298 CHAPTER 4 Page 515 Issue 1 AFCD : Assignmen t of Fixed Connection-Nailed Down Connection-Data 4. Data Sheet LINE EQ UI PM ENT NUMBER (SIDE A) (LENS-A) EQUI PMENT ADDITIONAL DA T A (EAD-A) LI.
CHAPTER 4 NDA-24298 Page 516 Issu e 1 ARTD : Assignment of Route Class Da ta AR TD: Assignment of Route Class Data 1. General This command assign s the Route Cla ss Data. 2. Precautions 1. The AR TD command should be a ssigned for all e xternal trunk routes a nd the dummy ro ute for LCR/ LCRS.
NDA-24298 CHAPTER 4 Page 517 Issue 1 ARTD : Assignment of Route Class Data 4. Data Sheet RT FUNCTION REMARKS 1O S G S Signal Interface for Outgoing 0= C C I S N o .
CHAPTER 4 NDA-24298 Page 518 Issu e 1 ARTD : Assignment of Route Class Da ta Figure 4-15 SMDR2 b 0 b 1 b 2 b 3 0/1: -/Incoming Call (SMDR is required) 0/1: SMDR is required for toll and local out- going calls/SMDR is required only fo r tol l outgoing calls.
NDA-24298 CHAPTER 4 Page 519 Issue 1 ARTD : Assignment of Route Class Data RT FUNCTION REMARKS 1O S G S Signal Interface for Outgoing 0= C C I S N o . 7 1= R i n g D o w n 2 = Second Dial T one 3 = No.
CHAPTER 4 NDA-24298 Page 520 Issu e 1 ARTD : Assignment of Route Class Da ta 6T C L T runk Cl ass Spec ify the kind of t runk 1 = DDD Line 2 = FX 3 = W A TS Line 4 = Tie L ine/Anno uncement T runk 5 =.
NDA-24298 CHAPTER 4 Page 521 Issue 1 ARTD : Assignment of Route Class Data 15 LSG Line Signal 0= L o o p 1 = Ground Star t C .O . Line 2= C D H 3 = Caller ID (Loop) 4= L o o p 5= E & M T i e L i n e 6= D X 7= 2 4 V 4 8 = Loop DID 9 - 11 = Not used 12 = Speech Line (for CCIS No.
CHAPTER 4 NDA-24298 Page 522 Issu e 1 ARTD : Assignment of Route Class Da ta RT FUNCTION REMARKS 24 O C 0= - 1 = Or ig inating Category Informatio n is used For MFC s ignaling (Brazil and Mexico) 25 R / L Atten d ant-I denti fica tion of Inc o ming Tr unk Dis pla y.
NDA-24298 CHAPTER 4 Page 523 Issue 1 ARTD : Assignment of Route Class Data 3 2 I CRL Release timin g for incoming trunk connections. 0 = 288 msec . Note 1 = 224 msec. 2 = 288 mse c. 3 = 352 msec. 4 = 416 mse c. 5 = 480 msec. 6 = 544 mse c. 7 = 608 msec.
CHAPTER 4 NDA-24298 Page 524 Issu e 1 ARTD : Assignment of Route Class Da ta 39 B C C.O Line Idle Balance Condition. 0 = Not balanced 1 = Balanced For Aus tralia only 40 T C M T ra v el Class Mark 0 =.
NDA-24298 CHAPTER 4 Page 525 Issue 1 ARTD : Assignment of Route Class Data 56 S M D R 3 Detailed billing for out going in tandem conn ection. 0 = Required 1 = Not required Assig n this for the incoming route (I CR T), if necessary .
CHAPTER 4 NDA-24298 Page 526 Issu e 1 ARTD : Assignment of Route Class Da ta 68 S C F Split Call Forwarding The call is forwarded to the desired destination assigned at 0 = Split C . F . - All Call s (SSC, SID = 8 ), Split C. F . - Busy Line (SSC, SID = 10), Split C.
NDA-24298 CHAPTER 4 Page 527 Issue 1 ARTD : Assignment of Route Class Data 7 3 KPST Dura t i on of K P send i n g 0 = 48 msec. 1 = 56 msec. 2 = 64 msec. 3 = 72 msec. 4 = 80 msec. 5 = 88 msec. 6 = 96 msec. 7 = 104 msec. 8 = 112 msec. 9 = 120 msec. 10 = 128 msec.
CHAPTER 4 NDA-24298 Page 528 Issu e 1 ARTD : Assignment of Route Class Da ta 7 9 PPT M Sender Prepares 0 = Standard Note 1 = 600 msec. 2 = 800 msec. 3 = 1000 msec . 4 = 1200 msec. 5 = 1400 msec. 6 = 1600 msec. 7 = 1800 msec. 8 = 2000 msec. 9 = 2200 msec.
NDA-24298 CHAPTER 4 Page 529 Issue 1 ARTD : Assignment of Route Class Data 8 1 LPTM Sender Inter-Digit Pause In dex 0 = DP/1 sec., PB/0.5s ec. 1 = 600 msec. 2 = 800 msec. 3 = 1000 msec. 4 = 1200 msec. 5 = 1400 msec. 6 = 1600 msec. 7 = 1800 msec. 8 = 2000 msec.
CHAPTER 4 NDA-24298 Page 530 Issu e 1 ARTD : Assignment of Route Class Da ta 98 C I ISDN transmitting i nformation 0 = Out of Service 1 = 16-D ig it Caller Number Service, Attribute Information Notification Service, and Calling Sub- Address T ransfer Service 2-15 = No t used 99 OID 0 0 0 0 A lw ays as sign data “ 0.
NDA-24298 CHAPTER 4 Page 531 Issue 1 ARTD : Assignment of Route Class Data Table 4- 21 provides ex amples of stan dard rout e cla ss sett ings . 120 I F R Indonesia Compul sion Cut Service 0 = Out of Servic e 1 = In Servic e 0 0 0 0 A lw ays as sig n data “ 0.
CHAPTER 4 NDA-24298 Page 532 Issu e 1 ARTD : Assignment of Route Class Da ta 2 0 D 0 0 0 0000 0 2 1 M S B 0 0 0 0000 0 2 2 M S W 0 0 0 0000 0 23 TR 0 0 0 0 0 0 0 0 24 OC 0 0 0 0 0 0 0 0 2 5 R / L 0 0 .
NDA-24298 CHAPTER 4 Page 533 Issue 1 ARTD : Assignment of Route Class Data 5 7 H D T0 0 0 0000 0 58 CD 0 0 0 0 0 0 0 0 5 9 C C H0 0 0 0000 0 6 0 T C / E C 0 0 0 0000 0 6 1 I R E 0 0 0 0000 0 6 2 S C R.
CHAPTER 4 NDA-24298 Page 534 Issu e 1 ARTD : Assignment of Route Class Da ta 93 ODGD 0 0 0 0 0 0 0 0 9 4 R L S 0 0 0 0000 0 9 5 G W D 0 0 0 0000 0 96 H1 0 0 0 0 0 0 0 0 97 DT 0 0 0 0 0 0 0 0 98 CI 0 0.
NDA-24298 CHAPTER 4 Page 535 Issue 1 ARTDN : Assignment of Route Class Data for NDM AR TDN: Assignment of Route Class Data f or NDM 1. General Using thi s command, all lo gical route data of all Local Node (LN) may be dis played and ch anged at the Network Control Node in the F usion n etwork.
CHAPTER 4 NDA-24298 Page 536 Issu e 1 ARTDN : Assignment of Route Class Data for NDM 4. Data Sheet LGRT 1-899 FUNCTION REMARKS 1O S G S Signal Interface for Outgoing 0 = CCIS No .
NDA-24298 CHAPTER 4 Page 537 Issue 1 ARTDN : Assignment of Route Class Data for NDM 6T C L T runk Class Speci fy the kind of tr unk 1 = DDD Line 2= F X 3 = W A T S L i n e 4 = Ti e Li ne/Announcement .
CHAPTER 4 NDA-24298 Page 538 Issu e 1 ARTDN : Assignment of Route Class Data for NDM 15 LSG Line S igna l 0= L o o p 1 = Ground Start C.O. Line 2= C D H 3 = Caller ID (Loop) 4= L o o p 5 = E&M T ie Line 6= D X 7= 2 4 V 4 8 = Loop DID 9 - 11 = Not used 12 = Speech Line (for CCIS No.
NDA-24298 CHAPTER 4 Page 539 Issue 1 ARTDN : Assignment of Route Class Data for NDM Figure 4-16 SMDR2 (ARTDN) T a ble 4-22 SMDR2 (ARTDN) C O N T E N T S / I N P U T 0123456 789 1 0 1 1 1 2 1 3 1 4 1 5 b0 0-Det ailed b illing is not require d for inc oming call s .
CHAPTER 4 NDA-24298 Page 540 Issu e 1 ARTDN : Assignment of Route Class Data for NDM LGRT 1-899 FUNCTION REMARKS 24 O C 0= - 1 = Or ig inating Category Informatio n is used For MFC s ignaling (Brazil and Mexico) 25 R / L Atten d ant-I denti fica tion of Inc o ming Tr unk Dis pla y.
NDA-24298 CHAPTER 4 Page 541 Issue 1 ARTDN : Assignment of Route Class Data for NDM 3 2 I CRL Release timin g for incoming trunk connections. 0 = 288 msec. Note 1 = 224 msec. 2 = 288 msec. 3 = 352 msec. 4 = 416 msec. 5 = 480 msec. 6 = 544 msec. 7 = 608 msec.
CHAPTER 4 NDA-24298 Page 542 Issu e 1 ARTDN : Assignment of Route Class Data for NDM 39 B C C.O Line Idle Balance Cond ition. 0 = Not balanced 1 = Balanced F or Australia only 40 T C M T ra v el Class.
NDA-24298 CHAPTER 4 Page 543 Issue 1 ARTDN : Assignment of Route Class Data for NDM 56 S M D R 3 Detailed billing for out going in tandem conn ection. 0 = Required 1 = Not requi red Assig n this for the incoming route (I CR T), if necessary .
CHAPTER 4 NDA-24298 Page 544 Issu e 1 ARTDN : Assignment of Route Class Data for NDM 68 S C F Split Call Forwarding The call is forwarded to the desired destination assigned at 0 = Sp lit C. F . - All Calls (SSC, SID = 8), Split C. F . - Busy L ine (SS C, SID = 10 ), S plit C.
NDA-24298 CHAPTER 4 Page 545 Issue 1 ARTDN : Assignment of Route Class Data for NDM 7 3 KPST Dura t i on of K P send i n g 0 = 48 msec. 1 = 56 msec. 2 = 64 msec. 3 = 72 msec. 4 = 80 msec. 5 = 88 msec. 6 = 96 msec. 7 = 104 msec. 8 = 112 msec. 9 = 120 msec.
CHAPTER 4 NDA-24298 Page 546 Issu e 1 ARTDN : Assignment of Route Class Data for NDM 7 9 PPT M Sender Prepares 0 = Standard 1 = 600 msec. 2 = 800 msec. 3 = 1000 msec. 4 = 1200 msec. 5 = 1400 msec. 6 = 1600 msec. 7 = 1800 msec. 8 = 2000 msec. 9 = 2200 msec.
NDA-24298 CHAPTER 4 Page 547 Issue 1 ARTDN : Assignment of Route Class Data for NDM 8 1 LPTM Sender Inter-Digit Pause In dex 0 = DP/1 sec., PB/0.5sec. 1 = 600 msec. 2 = 800 msec. 3 = 1000 msec. 4 = 1200 msec. 5 = 1400 msec. 6 = 1600 msec. 7 = 1800 msec.
CHAPTER 4 NDA-24298 Page 548 Issu e 1 ARTDN : Assignment of Route Class Data for NDM 98 C I ISDN transmitting i nformation 0 = Out of Service 1 = 16-Dig it Caller Number Service, Attribute Informa- tion Notification Service, and C alling Sub-Ad dress T ransfer Service 2-15 = No t used 99 OID 0 0 0 0 A lw ays as si g n data “ 0.
NDA-24298 CHAPTER 4 Page 549 Issue 1 ARTDN : Assignment of Route Class Data for NDM Table 4- 23 provides ex amples of stan dard rout e cla ss sett ings .
CHAPTER 4 NDA-24298 Page 550 Issu e 1 ARTDN : Assignment of Route Class Data for NDM 23 TR 0 0 0 0 0 0 0 0 24 OC 0 0 0 0 0 0 0 0 2 5 R / L 0 0 0 00 00 0 26 R VSD 0 0 0 0 0 0 0 0 27 TL 0 0 0 0 0 0 0 0 .
NDA-24298 CHAPTER 4 Page 551 Issue 1 ARTDN : Assignment of Route Class Data for NDM 6 0 T C / E C 0 0 0 0000 0 6 1 I R E 0 0 0 0000 0 6 2 S C R 0 0 0 0000 0 6 3 L Y E R 1 0 0 0 0000 0 6 4 N E T 0 0 0 .
CHAPTER 4 NDA-24298 Page 552 Issu e 1 ARTDN : Assignment of Route Class Data for NDM 97 DT 0 0 0 0 0 0 0 0 98 CI 0 0 0 0 0 0 0 0 9 9 O I D 0 0 0 0000 0 100 TKS 0 0 0 0 0 0 0 0 101 P AD2 0 0 0 0 0 0 0 .
NDA-24298 CHAPTER 4 Page 553 Issue 1 ALRNN : Assignment of Logical Route and Route Class Data for NDM ALRNN: Assignmen t of Logical Rou te and Route Class Data for NDM 1.
CHAPTER 4 NDA-24298 Page 554 Issu e 1 ALRNN : Assignment of Logical Route and Route Class D ata for NDM 4. Data Sheet LOGICAL R OUTE (LGR T) 1-899 REMARKS FUSION POINT CODE (FPC) 1-253 ROUTE NUMBER (RT) 1-255 1O S G S Signal Interface for Outgoing 0 = CCIS No .
NDA-24298 CHAPTER 4 Page 555 Issue 1 ALRNN : Assignment of Logical Route and Route Class Data for NDM 6T C L T runk Class Speci fy the kind of tr unk 1 = DDD Line 2= F X 3= W A T S L i n e 4 = T ie Li.
CHAPTER 4 NDA-24298 Page 556 Issu e 1 ALRNN : Assignment of Logical Route and Route Class D ata for NDM 15 LSG Line S igna l 0= L o o p 1 = Ground Start C.O . Line 2= C C H 3 = Caller ID (Loop) 4= L o o p 5 = E&M T ie Line 6= D X 7= 2 4 V 4 8 = Loop DID 9 - 11 = Not used 12 = Speech Line (for CCIS No.
NDA-24298 CHAPTER 4 Page 557 Issue 1 ALRNN : Assignment of Logical Route and Route Class Data for NDM Figure 4-17 SMDR2 (ALRNN) Table 4-24 SMDR 2 (ALRNN) C O N T E N T S / I N P U T 0123456 789 1 0 1 1 1 2 1 3 1 4 1 5 b0 0-Det ailed b illing is not require d for inc oming call s .
CHAPTER 4 NDA-24298 Page 558 Issu e 1 ALRNN : Assignment of Logical Route and Route Class D ata for NDM LOGICAL ROUTE (L GRT) 1-899 REMARKS FUSION POINT CODE ( FPC) 1-253 ROUTE NUMBER (RT) 1-255 24 O .
NDA-24298 CHAPTER 4 Page 559 Issue 1 ALRNN : Assignment of Logical Route and Route Class Data for NDM 32 I C R L Release timing for incoming trunk connections. 0 = 288 msec. No te 1 = 224 msec. 2 = 288 msec. 3 = 352 msec. 4 = 416 msec. 5 = 480 msec. 6 = 544 msec.
CHAPTER 4 NDA-24298 Page 560 Issu e 1 ALRNN : Assignment of Logical Route and Route Class D ata for NDM 40 T C M T ra v el Class Mark 0 = Out of Serv ic e 1 = In Service 41 T D M Q T andem Of f H ook OG Queuing 0 = Out of Serv ic e 1 = In Service 42 T R S C T runk Restriction class 0 = Out of Service 1-15= In Service See AEFR command.
NDA-24298 CHAPTER 4 Page 561 Issue 1 ALRNN : Assignment of Logical Route and Route Class Data for NDM 5 7 HDT Heterogeneo us Data T runk 0 = Not Heterogene ous Data T runk 1 = Heterogeneous Dat a T ru.
CHAPTER 4 NDA-24298 Page 562 Issu e 1 ALRNN : Assignment of Logical Route and Route Class D ata for NDM 71 T C M C TCM and KP Se nding S eque nce 0= K P - S T 1= K P T C M - S T 2 = TCM KP-ST 3 = KP (TCM)-ST Use this when ONSG/ INSG = 4 (MF). 7 2 MFSP Sendi ng Speed T o ne ON T one OFF Dig it/sec.
NDA-24298 CHAPTER 4 Page 563 Issue 1 ALRNN : Assignment of Logical Route and Route Class Data for NDM 7 4 KPPT Pau se after KP sendin g 0 = 48 msec. 1 = 56 msec. 5 = 88 msec. 6 = 96 msec. 7 = 104 msec. 8 = 112 msec. 12 = 144 msec. 13 = 152 msec. 14 = 160 msec.
CHAPTER 4 NDA-24298 Page 564 Issu e 1 ALRNN : Assignment of Logical Route and Route Class D ata for NDM 80 M P T M Sender Mini mum P ause 0 = 10 PPS/600 m sec., 20 PPS/450 msec. 1 = 600 msec. 2 = 800 msec. 3 = 1000 msec. 4 = 1200 ms ec. 5 = 1400 msec.
NDA-24298 CHAPTER 4 Page 565 Issue 1 ALRNN : Assignment of Logical Route and Route Class Data for NDM 91 T O C I T runk Ov erride Cal ling 0 = Overrid e Inhibite d (Calling s ide). 1 = T ie Line Override Service i s provided (Cal l in g side). 92 T O C D T runk Overri de Called 0 = Override Inhibite d (Called si de).
CHAPTER 4 NDA-24298 Page 566 Issu e 1 ALRNN : Assignment of Logical Route and Route Class D ata for NDM Table 4- 25 provides ex amples of stan dard rout e cla ss sett ings .
NDA-24298 CHAPTER 4 Page 567 Issue 1 ALRNN : Assignment of Logical Route and Route Class Data for NDM 15 LS G 0 5 8 12 1 3 12 13 0 1 6 S M D R 2 0 0 0 0000 0 1 7 H / M 0 0 0 0000 0 18 M C 0 0 0 0 0 0 .
CHAPTER 4 NDA-24298 Page 568 Issu e 1 ALRNN : Assignment of Logical Route and Route Class D ata for NDM 53 F A A T 0 0 0 0 0 0 0 0 54 GW 0 0 0 0 0 0 0 0 55 T CMA 0 0 0 0 0 0 0 0 5 6 S M D R 3 0 0 0 00.
NDA-24298 CHAPTER 4 Page 569 Issue 1 ALRNN : Assignment of Logical Route and Route Class Data for NDM 91 TOCI 0 0 0 0 0 0 0 0 92 TOCD 0 0 0 0 0 0 0 0 93 ODGD 0 0 0 0 0 0 0 0 9 4 R L S 0 0 0 0000 0 9 5.
CHAPTER 4 NDA-24298 Page 570 Issu e 1 A TRK : Assignment of T runk Data A TRK: A ssignment of T runk Data 1. General This com mand assi gns the trun k data as the LEN S, Tr unk Rout e number (RT) and Trunk numb er (TK) . 2. Precautions 1. The trunk ro ute (R T) i s co mposed of the trunk s ( TK).
NDA-24298 CHAPTER 4 Page 571 Issue 1 A TRK : Assignment of T runk Data Figure 4-18 Group Number of LENS 8. The applicable T en ant Number (TN) ra nge is des ignated by the ASYD command, SYS 1, INDEX 8. 9. When deleting Atte ndant Console data, fli p the SW00 of the A TI card into t he Make Busy st ate befor e ex ecuting this c ommand 10.
CHAPTER 4 NDA-24298 Page 572 Issu e 1 A TRK : Assignment of T runk Data Figure 4-19 ATRK for DTI (T1) LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV.
NDA-24298 CHAPTER 4 Page 573 Issue 1 A TRK : Assignment of T runk Data Figure 4-20 ATRK f or CCT (T1) LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV.
CHAPTER 4 NDA-24298 Page 574 Issu e 1 A TRK : Assignment of T runk Data Figure 4-21 ATRK for PRT (23B+D) LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1.
NDA-24298 CHAPTER 4 Page 575 Issue 1 A TRK : Assignment of T runk Data Figure 4-22 AT RK for 16 COT LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 .
CHAPTER 4 NDA-24298 Page 576 Issu e 1 A TRK : Assignment of T runk Data Figure 4-23 ATRK for 8 COT LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 L.
NDA-24298 CHAPTER 4 Page 577 Issue 1 A TRK : Assignment of T runk Data Figure 4-24 ATRK for RST LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 .
CHAPTER 4 NDA-24298 Page 578 Issu e 1 A TRK : Assignment of T runk Data Figure 4-25 ATRK for ATI LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 Level SLOT23 Group 20 G.
NDA-24298 CHAPTER 4 Page 579 Issue 1 A TRK : Assignment of T runk Data Figure 4-26 A TRK for 4DAT LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV.
CHAPTER 4 NDA-24298 Page 580 Issu e 1 A TRK : Assignment of T runk Data Figure 4-27 ATRK for CFT (3-Party Co nf ere nce) LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 Level CFT#7 CFT#6 CFT#5 CFT#4 CFT#3 CFT#2 CFT#1 CFT#0 roup 20 roup 22 roup 21 roup 23 32 PORT/SLOT of Odd number unit.
NDA-24298 CHAPTER 4 Page 581 Issue 1 A TRK : Assignment of T runk Data 3. Data Entry Instructi ons • Intern al T runk Route / Externa l T runk Route (R T number e xcept 901) Enter the external trunk.
CHAPTER 4 NDA-24298 Page 582 Issu e 1 A TRK : Assignment of T runk Data DLMX (RT = 938) ROUTE NUMBER (RT) TRUNK NUMBER (TK) 1-255 LINE EQUIPMENT NUMBER (LENS) 6 DIGITS MG U G LV REMARKS Enter the mounting location of each trunk. MG: 00-07 Unit: 0-3 Group: 1, 5, 9 (No.
NDA-24298 CHAPTER 4 Page 583 Issue 1 A TRK : Assignment of T runk Data 4. Data Sheet (a) External T runk Data ROU TE NUMBER (R T) TR UNK NUMBER (TK) LINE EQUIPMENT NUMBER (LENS) 6 DIGITS TENANT NUMBER.
CHAPTER 4 NDA-24298 Page 584 Issu e 1 A TRK : Assignment of T runk Data (b) Attendant Consol e Data (R T = 901) Note: T runk No. r efers to A TT No. ROU TE NUMBER (RT) TRUNK NUMBER (TK) Not e LINE EQU.
NDA-24298 CHAPTER 4 Page 585 Issue 1 A TRK : Assignment of T runk Data (c) Internal T runk Data ROUTE NUMBER (RT) 9XX TRUNK NUMBER (TK) LINE EQUIPMENT NUMBER (LENS ) 6 DIGITS REMARKS MG U G L V.
CHAPTER 4 NDA-24298 Page 586 Issu e 1 ARTKN : Assignment of Route T runk Data for NDM AR TKN: Assignment of R oute T runk Data f or NDM 1. General As the func tions of ALRTN and ATRK comma nds ar e combined in to th is co mman d, it is used to al locate bot h the Logic al Route Number and the Trunk nu mber (TK) at the sa me time.
NDA-24298 CHAPTER 4 Page 587 Issue 1 ARTKN : Assignment of Route T runk Data for NDM 4. Data Sheet LOGICAL RO UT E NUMBER (LGRT) FUSION POINT CODE (FPC) 1-25 3 RO UT E NUMBER (RT) TRUNK NUMBER (TK) LI.
CHAPTER 4 NDA-24298 Page 588 Issu e 1 AMA T : Assignment of Ma ster Attendant Data AMA T: Assignment of Master At tendant Data 1. General When more than one Attendant Cons ole has been i nstalle d for one tenan t, this command as signs a Maste r Console f or cont rollin g the Day /Night fun ction of all the Attenda nt Consoles on a t enant basis.
NDA-24298 CHAPTER 4 Page 589 Issue 1 AMA T : Assignment o f Ma ster Attenda nt Data 4. Data Sheet MODE 1/2 TENANT NUMBER (TN) A T TE ND ANT NUMBER (A TN) 1-16 REMARKS.
CHAPTER 4 NDA-24298 Page 590 Issu e 1 ASA T : Assignment of Sp ecific Attendant Number Data ASA T: Assign ment of Specific Attendant Number Data 1. General This com mand assi gns a spec ific Atte ndan t Numb er tha t allow s a statio n us er to a ccess the desi red operator.
NDA-24298 CHAPTER 4 Page 591 Issue 1 ASA T : As signment of Specific Attendant Number Data 4. Data Sheet TENANT NUMBER (TN) A CCESS CODE (A CC) MAXIMUM 5 DIGITS A TTEND ANT NUMBER (A TN) REMARKS.
CHAPTER 4 NDA-24298 Page 592 Issu e 1 ASA TN : Assignment of Specific Attendant Number Data for NDM ASA TN: Assignment of Specific Attendant Number Data f or NDM 1. General This comma nd assigns a specific Attendan t Number th at allows a statio n user to acce ss the de sired operator .
NDA-24298 CHAPTER 4 Page 593 Issue 1 ASA TN : Assignment of Specific Att endant Number Data for NDM 4. Data Sheet USER GR OUP NUMBER (UGN ) A CCESS CODE (A CC) MAXI M UM 16 DIG ITS FUSION POINT CODE (.
CHAPTER 4 NDA-24298 Page 594 Issu e 1 A TGL : Assignme nt of T runk Group Busy Lamp Data A T GL : Assignment of T runk G r oup Busy Lamp Data 1. General This command assigns the data rel ated to the Trunk Group Busy Lamp which i s accommodate d on the Attendan t Console.
NDA-24298 CHAPTER 4 Page 595 Issue 1 A TGL : Assignment o f T runk Group Busy Lamp Data 4. Data Sheet A TTEND ANT NUM BER (A TN) TR UNK GR OUP NUMBER (TGN) 1-10 ROU TE NUMBER (R T) REMARKS.
CHAPTER 4 NDA-24298 Page 596 Issu e 1 A TGLL : Assignment of T runk Group Busy Lamp Da ta for LDM A T GL L : Assignment of T runk Group Busy Lamp Data f or LDM 1. General This command is us ed to rea dout/ass ign/dele te the co ntrolli ng data of Trunk Grou p Busy Lamp which is acco mmod ated on th e Atte ndant C onsol e.
NDA-24298 CHAPTER 4 Page 597 Issue 1 A TGLL : Assignment of T runk Group Busy Lamp Data for LDM 4. Data Sheet A TTEND ANT NUMBER (A TN) TR UNK GROU P BUSY LAMP NUM BER (TGN) 1-10 LOGICAL R OUTE NUMBER.
CHAPTER 4 NDA-24298 Page 598 Issu e 1 AAKP : Assignment of A TT Key Position AAKP: Assignment of A T T Ke y P o sition 1. General This comm and s ets t he fu nctions of t he to p row of I ncomin g Call Iden tifica tion (ICI) key s for answer ing incom ing calls a t the Atte ndan t Conso le.
NDA-24298 CHAPTER 4 Page 599 Issue 1 AAKP : Assignment of A TT Key Position • Desk Consol e Figure 4-28 ATT Ke y Position (Desk Consol e - Business) • Hote l Atten dant Co nsol e L6 L5 1 2 3 Cance.
CHAPTER 4 NDA-24298 Page 600 Issu e 1 AAKP : Assignment of A TT Key Position • Hotel Des k Console 3. Data Entry Instructi ons Position Busy Night PAGE REC Start Mute TF Recall NANS ADM Busy TIE LDN.
NDA-24298 CHAPTER 4 Page 601 Issue 1 AAKP : Assignment of A TT Key Position 4. Data Sheet A TTEND ANT NUMBER (A TN) KEY NUMBER (KYN) 1-6 FUNCTION CODE (FUNC) 1-1 6 A T TEND ANT NUMBER (A TN) KEY NUMBE.
CHAPTER 4 NDA-24298 Page 602 Issu e 1 ACOC : Assignment of Central Office Code A COC: Assignment of Central Office Code 1. General This command assign s the C.
NDA-24298 CHAPTER 4 Page 603 Issue 1 ACOC : Assignment of Cent ral Office Code 4. Data Sheet ROUTE NUMBER (R T) TR UNK NUMBER (TK) DIGIT CODE (DC) 4 DIGITS REMARKS.
CHAPTER 4 NDA-24298 Page 604 Issu e 1 ACOC_LR : Assignment of Central Off ice Code – Logical Route Number A COC_LR: Assignment of Central Offi ce Code – Logical Route Number 1. General This comma nd is used to assign C.O. line cod e and tie li ne code corr espondi ng to particul ar trunks .
NDA-24298 CHAPTER 4 Page 605 Issue 1 ACOC_LR : Assignment of Central Office Code – Logical Route Number 4. Data Sheet LOGICAL ROU TE NUMBER (LGRT) 1-899 FUSIO N POINT COD E (FPC) 1-253 EXTERNAL ROU TE NUMBER (RT) TRUNK NUMBER (TK) 1-255 DIGIT CODE (DC) MAX.
CHAPTER 4 NDA-24298 Page 606 Issu e 1 ACID : Assign m en t of Caller ID Data A CID: Assignment of Caller ID Data 1. General This command assign s calling numb er data for th e following serv ic es: • Call Bloc k • Distinc ti ve Ring ing - Call er ID • Represen tation Name 2.
NDA-24298 CHAPTER 4 Page 607 Issue 1 ACID : Assignment of Caller ID D ata DAY/NIGHT (D/N) D/N RINGER PATTERN (RGP) 0/1/5/6/7 SERVICE KIND 2 (SRV2) 1/2 CALL CONNECTING INDEX (CFI) 1-3 TENANT NUMBER FOR.
CHAPTER 4 NDA-24298 Page 608 Issu e 1 ACID : Assign m en t of Caller ID Data (a) When TYPE = 1 (T ransf er , Incomi ng Permis sion denial ) is assi gne d TN ST A TION NUMBE R (ST N) MAXIMUM 6 DIGITS C.
NDA-24298 CHAPTER 4 Page 609 Issue 1 ACID : Assignment of Caller ID D ata (b) When TYPE = 2 (Di al -i n, C.O. connect restric ti on) is assigned RT D A Y/NIGH T (D/N) D/N CALLER ID (CID) 1-28 SER VICE.
CHAPTER 4 NDA-24298 Page 610 Issu e 1 ACID : Assign m en t of Caller ID Data (c) Wh en TYP E = 3 (R epres enta tion Name ) is a ssign ed CALL ER ID (CID) 1-28 SER VICE KIND 3 (SR V3) REPRESENT A TION .
NDA-24298 CHAPTER 4 Page 611 Issue 1 AP AD : Assignment of P AD Data AP AD: Assignm ent of P AD Data 1. General This command assign s PAD control data for ta ndem connection s, and trun k-t o-stat ion conn ections. 2. Precautions When KIND = 2 (stati on) is des ignated, a ss ign the dummy data to the parameter OGPAD.
CHAPTER 4 NDA-24298 Page 612 Issu e 1 AP AD : Assignment of P AD Data 4. Data Sheet KIND OF CONNECTION (KIND) 1-4 INCOMING RO UT E NUM BER (ICRT) OUTGOING ROU TE NUMBER (OGRT) SFC 0-15 DIGITS CODE (DC.
NDA-24298 CHAPTER 4 Page 613 Issue 1 AP ADN : Assignment of P AD Data for NDM AP ADN: Assignment of P AD Data for NDM 1. General This command assi gns PAD c ontrol d ata for t andem con nections and trun k to station connect ions in an FCCS netw ork.
CHAPTER 4 NDA-24298 Page 614 Issu e 1 AP ADN : As sign ment of P AD Data for NDM 4. Data Sheet KIND OF CONNECTION (KIND) T/S INCOMING LOGICAL R OUTE NUMBER (IC LGRT) 1-899 OUTGOING LOGICAL R OUTE NUMB.
NDA-24298 CHAPTER 4 Page 615 Issue 1 AAED : Assignment of Announc ement Equipment Data AAED: Assignment of Anno uncement Eq uipment Data 1. General This co mmand ass igns the trun k informa tion re lated t o Announcement Equipment on a t enant basis.
CHAPTER 4 NDA-24298 Page 616 Issu e 1 AAED : Assignment of Announc ement Equipment Data 3. Data Entry Instructi ons Enter EQP as the service feature provided by DAT.
NDA-24298 CHAPTER 4 Page 617 Issue 1 AAED : Assignment of Announc ement Equipment Data 4. Data Sheet Note: P arameter L ANG is avail able for th e Ho te l System .
CHAPTER 4 NDA-24298 Page 618 Issu e 1 AAEDL : Assignment of Announcement Equipment Data for LDM AAEDL: Assignment of Announcem ent Equi pm ent Data fo r LDM 1. General This command assigns the connected trunk data and the condition related to Annou n cement Equipm ent.
NDA-24298 CHAPTER 4 Page 619 Issue 1 AAEDL : Assignment of Announcement Equipme nt Data for LDM 3. Data Entry Instructi ons Enter EQP as the service feature provided by DAT.
CHAPTER 4 NDA-24298 Page 620 Issu e 1 AAEDL : Assignment of Announcement Equipment Data for LDM 4. Data Sheet TENANT NUMBER (TN) ANNOUNCEMENT EQUIPMENT NUMBER (EQP) 0-127 DURA TION OF CONNECTION (C) 0.
NDA-24298 CHAPTER 4 Page 621 Issue 1 AAEDN : Assignment of Announcement E quipment Data for NDM AAEDN: Assignment of Announcement Equipment Data f or NDM 1. General This comma nd assigns t he connec ted trunk dat a and the condi tion rela ted to Announc ement Equipment .
CHAPTER 4 NDA-24298 Page 622 Issu e 1 AAEDN : Assignment of Announcement E quipment Data for NDM 3. Data Entry Instructi ons Enter EQP as the service feature provided by DAT.
NDA-24298 CHAPTER 4 Page 623 Issue 1 AAEDN : Assignment of Announcement E quipment Data for NDM 4. Data Sheet TENANT NUMBER (TN) ANNOUNCEMENT EQUIPMENT NUMBER (EQP) 0-127 DURA TION OF CONNECTION (C) 0.
CHAPTER 4 NDA-24298 Page 624 Issu e 1 AHMS : Assignment of Musi c on Hold Data AHMS: Assignment of Music on Hold Data 1. General This comman d is used when a tr unk provides Extended Hold Music.
NDA-24298 CHAPTER 4 Page 625 Issue 1 AHMS : Assignment of M usic on Hold Data 3. Data Entry Instructi ons 1 = Extended Hold Music 2 = Sound Source LENS (Not used in USA) TYPE 1 = Tenant Numbering of Hold Station (Not used in USA) 2 = Route Number of Held Trunk 3 = Tenant number of hold station and route numbering of held trunk.
CHAPTER 4 NDA-24298 Page 626 Issu e 1 AHMS : Assignment of Musi c on Hold Data 4. Data Sheet OPERA TION TYPE (TYPE) 1/2 OPERA TION KIND (KIND) 1-3 TENANT NUMBER (TN) ROU TE NUMBER (RT) MUSIC ON HOLD D.
NDA-24298 CHAPTER 4 Page 627 Issue 1 ADPC : Assignment of Determinate Point Code Data ADPC: Assignment of Determinate P oint Code Data 1. General This command ass igns the determi nate Point Code (PC) for CC IS and/ or the ISDN inter fa ce.
CHAPTER 4 NDA-24298 Page 628 Issu e 1 ADPC : Assignment of Determinate Point Code Data 4. Data Sheet ROUTE NUMBER (R T) DETERM IN A TE POIN T CO DE (PC) 1 - 16383 REMARKS.
NDA-24298 CHAPTER 4 Page 629 Issue 1 ADPCL : Assignment of Determinate Point Code Data for LDM ADPCL: Assignment of Determinate P oint Code Data f or LDM 1. General This com mand assigns t he determinat e Point Code (PC) for CCIS and /or the ISDN in terface .
CHAPTER 4 NDA-24298 Page 630 Issu e 1 ADPCL : Assignment of Determinate Point Code Data for LDM 4. Data Sheet LOGICAL R OUTE NUMBER (LGRT) 1-899 DETERMINA TE POINT CODE (PC) 1 - 16383 REMARKS.
NDA-24298 CHAPTER 4 Page 631 Issue 1 ACSC : Assignment of CSC Data A CSC: Assignment of CSC Data 1. General This command assi gns the Common Channel Handl er (CCH)/ D-Channel Handler (DCH) locat ion of th e Common Channel S ignaling Control ler Group (CSCG).
CHAPTER 4 NDA-24298 Page 632 Issu e 1 ACSC : Assignment of CSC Data When it is PR T car d, the Dch2 grou p is the loca tion that shoul d be entered in the CCH paramet er of e ven number CSCG, and the same l ocation s hould als o be entered in th e CCH parameter of its con secut ive odd number CSCG.
NDA-24298 CHAPTER 4 Page 633 Issue 1 ACSC : Assignment of CSC Data Figure 4- 30 A CS C f or PRT (30B+D) LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 .
CHAPTER 4 NDA-24298 Page 634 Issu e 1 ACSC : Assignment of CSC Data Figure 4-31 ACSC for CCH/DCH LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7.
NDA-24298 CHAPTER 4 Page 635 Issue 1 ACSC : Assignment of CSC Data 3. Data Entry Instructi ons 2 0 0 0 0 0 4 1 2 · For CCIS, enter the signal channel location of the CCT/CCH · For ISDN, the following data should be assigned to this parameter.
CHAPTER 4 NDA-24298 Page 636 Issu e 1 ACSC : Assignment of CSC Data 4. Data Sheet (a) Even numbe r CSCG (b) Odd number CSCG CSC GR OUP NUMBER (CSCG) 2-254 CIC GROUP NUMBER (GR OUP ) COMMON CHANNEL SIG.
NDA-24298 CHAPTER 4 Page 637 Issue 1 ACSCL : Assignment of CSC Data for LDM A CSCL: Assignmen t of CSC Data for LDM 1. General This command assign s the Common Chann el Handl er (CCH) locat ion of the Common Channel Si gnaling Controll er Gro up (CSCG).
CHAPTER 4 NDA-24298 Page 638 Issu e 1 ACSCL : Ass ignment of CSC Data for LDM Figure 4-32 ACSCL for CCT (E1) LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3.
NDA-24298 CHAPTER 4 Page 639 Issue 1 ACSCL : Assignment of CSC Data for LDM Figure 4-33 ACSC L for CCH LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 LV0 LV7 6 5 4 3 2 1 L.
CHAPTER 4 NDA-24298 Page 640 Issu e 1 ACSCL : Ass ignment of CSC Data for LDM 3. Data Entry Instructi ons Enter any even number and its consecutive odd number within 2-255 (128 and 129 is not used).
NDA-24298 CHAPTER 4 Page 641 Issue 1 ACSCL : Assignment of CSC Data for LDM 4. Data Sheet (a) Even numbe r CSCG (b) Odd number CSCG CSC GR OUP NUMBER (CSCG) 130-254 CIC GROUP NUMBER (GR OUP ) FUSION P.
CHAPTER 4 NDA-24298 Page 642 Issu e 1 ACI C1 : As sig nment of C IC Co de Data 1 A CIC1: Assignment of CIC Code Data 1 1. General This command i s used for CCIS and/or I SDN data programming , and is ass igned in t he Common Channel Sign al ing C o nt rolle r Group (C S C G) fo r a dete rm i na te Poin t Co d e (PC).
NDA-24298 CHAPTER 4 Page 643 Issue 1 ACIC1 : Assignment of CIC Code Data 1 4. Data Sheet DETERMINA TE P OINT CODE (PC) COMMON CHANNEL SIGNALING CONTR OLLER GROUP NUMBER (CSCG) REMARKS.
CHAPTER 4 NDA-24298 Page 644 Issu e 1 ACI C2 : As sig nment of C IC Co de Data 2 A CIC2: Assignment of CIC Code Data 2 1. General This comma nd is used for CCIS dat a programming , and is assigne d the Circuit Identi ficati on Code (CIC) and LENS (of the speec h channe l of the CCI S link) f or the PC.
NDA-24298 CHAPTER 4 Page 645 Issue 1 ACIC2 : Assignment of CIC Code Data 2 4. Data Sheet DETERMINA TE POINT CODE (PC) CIRCUIT IDENTI FICA T ION CODE (CIC) LINE EQUIP MENT NUMBER (LENS) REMARKS.
CHAPTER 4 NDA-24298 Page 646 Issu e 1 ARTI : Assignment of T runk Application Data AR TI: Assignment of T run k Application Data 1. General This command assign s Trunk Appli ca ti on Data. 2. Precautions 1. The AR TD comman d should b e assigned fo r the ex ternal t runk route .
NDA-24298 CHAPTER 4 Page 647 Issue 1 ARTI : Assignment of T runk Application Data 6 T30 9CON Assignm ent of T imer T309 for Layer 1 Fai lure 0 = Layer 1 Alarm with T309 is disabled 1 = Layer 1 Alarm [.
CHAPTER 4 NDA-24298 Page 648 Issu e 1 ARTI : Assignment of T runk Application Data 20 D V R S T Call restriction while T ie Line is backed up o n ISDN.
NDA-24298 CHAPTER 4 Page 649 Issue 1 ARTI : Assignment of T runk Application Data 32 S R V (Australia only) Additional Se rvice Selecti on bit 0 = Advice of C harge (A OC) 0 = V a lid 1 = I n valid bi.
CHAPTER 4 NDA-24298 Page 650 Issu e 1 ARTI : Assignment of T runk Application Data 37 E C C I S T M Release timer for E-CCIS Line 0 = 3 mi nutes (Default setting) 1 = 15 Seconds 2 = 30 Seconds 3= 1 m .
NDA-24298 CHAPTER 4 Page 651 Issue 1 ARTI : Assignment of T runk Application Data 49 E C C I S 2 E-CCIS System 0 = Ou t of Service 1 = Common Ch anne l Syste m 2= N o t u s e d 3= N o t u s e d 50 IP .
CHAPTER 4 NDA-24298 Page 652 Issu e 1 ARTIN : Assignment of T r unk Application Data for NDM AR TIN: Assignment of T runk Application Data f or NDM 1. General This command assi gns and de letes t runk appl ication data in Fusion Netwo rk.
NDA-24298 CHAPTER 4 Page 653 Issue 1 ARTIN : Assignment of T runk Application Data for NDM 4. Data Sheet CDN LOGICAL ROUTE NUMBER (1-899) TR UNK DA T A 1 RST Assignme nt of Restart 0 = Rest art Send p er Individual Ch annel 1 = Not us ed 2 = Not used 3 = Rest art not S end 2 H MT When assigning this data, always enter zero (0).
CHAPTER 4 NDA-24298 Page 654 Issu e 1 ARTIN : Assignment of T r unk Application Data for NDM 7 LLCRS T Call Restriction by user rate in Low Layer Capability Information Element 0 = No restric tion 1-31 = Call which includes this user rate valu e is restricted.
NDA-24298 CHAPTER 4 Page 655 Issue 1 ARTIN : Assignment of T runk Application Data for NDM 20 D VRST Call restriction while T ie Line is b acked up on ISDN .
CHAPTER 4 NDA-24298 Page 656 Issu e 1 ARTIN : Assignment of T r unk Application Data for NDM 31 ANI T im ing to dem and ANI Inf ormati on 0 = T here is no AN I demand at Incom ing call 1 = After recei.
NDA-24298 CHAPTER 4 Page 657 Issue 1 ARTIN : Assignment of T runk Application Data for NDM 3 5 L/ T Local/T oll (Russ ia onl y) When assigning this data, always enter zero (0).
CHAPTER 4 NDA-24298 Page 658 Issu e 1 ARTIN : Assignment of T r unk Application Data for NDM 47 INTD Interface Detail 0 = Q- SIG 1 = IS-115 72 48 JECCI S Common Use with E-CCI S R T 0 = Out of Ser vic.
NDA-24298 CHAPTER 4 Page 659 Issue 1 ASHP : Assignment of Sta tion Hunting Group-Pilot ASHP: Assignment of Station Hunting Group-Pilot 1. General This command ass igns t he data re lated t o the St ation Hunting - Pil ot servic e featur e. 2. Precautions 1.
CHAPTER 4 NDA-24298 Page 660 Issu e 1 ASHP : Assignment of S tation Hunting Group-Pilot 4. Data Sheet TENANT NUMBER (TN) PILO T ST A TION NUMBER (STN) SECRET AR Y S T ATION NUMBER (SECRET AR Y ) ST A .
NDA-24298 CHAPTER 4 Page 661 Issue 1 ASHPL : Assignment of Stat ion Hunting Group-Pilot for LDM ASHPL: Assignment of Station Hunting Gr oup-Pilo t for LDM 1. General This co mmand a ssigns t he data relate d to the Stat ion Hunti ng - Pil ot. Wit h this command, St ation Hun ting Group - Pilot can be a ssigned by usi ng Telephone Numbe r.
CHAPTER 4 NDA-24298 Page 662 Issu e 1 ASHPL : Assignment of Station Hunting Gr oup-Pilot for LDM 4. Data Sheet USER GROUP NUMBER (UGN) TELEPHONE NUMBER (TELN) S ECRET AR Y TEL EPHON E NUMBE R (SECR ET.
NDA-24298 CHAPTER 4 Page 663 Issue 1 ASHPN : Assignment of Station Hunting Gr oup-Pilot for NDM ASHPN: Assignment of Station Hunting Group-Pilot f or NDM 1. General This comma nd as sign s the d ata relate d to the Stat ion Hunt ing - Pilot for Fu sio n Servi ce.
CHAPTER 4 NDA-24298 Page 664 Issu e 1 ASHPN : Assignment of Station Hunting Gr oup-Pilot for NDM 4. Data Sheet USER GROUP NUMBER (UGN) TELEPHONE NUMBER (TELN) NUMBER OF ST A TIONS (CNT) TELEPHONE NUMB.
NDA-24298 CHAPTER 4 Page 665 Issue 1 ASHC : Assignmen t of Station Hun ting Group - Circular ASHC: Assignment of Statio n Hunting Group - Cir cular 1. General This command ass igns t he data re lated t o the St ation Hunting - Circ ular ser vice feat ure.
CHAPTER 4 NDA-24298 Page 666 Issu e 1 ASHC : Assign ment of Station Hunting Group - Circular 3. Data Entry Instructi ons Note: Enter th e Station Number to be assi gne d in “ EDIT STN ” box on the display . NUMBER OF STATIONS (CNT) NUMBER OF STATIONS (CNT) TENANT NUMBER (TN) 1-63 SECRETARY STATION NUMBER (SECRET STN) Max.
NDA-24298 CHAPTER 4 Page 667 Issue 1 ASHC : Assignmen t of Station Hun ting Group - Circular 4. Data Sheet TENANT NUMBER (TN) ST A TION NUMBER (STN) MAXI M UM 5 DI GITS SECRET AR Y S T ATION NUMBER (S.
CHAPTER 4 NDA-24298 Page 668 Issu e 1 ASHCL : Assignment of Station Hunting Group-Circula r for LDM ASHCL: Assignment o f St ation Huntin g Group-Cir cular for LDM 1. General This co mmand assign s the data relate d to the Sta tion Hunting - Circular ser vice feat ure.
NDA-24298 CHAPTER 4 Page 669 Issue 1 ASHCL : Assignment of Station Hunting Group- Circular for L DM 4. Data Sheet USER GROUP NUMBER (UGN) TELEPHONE NUMBER (TELN) SECRET AR Y TELEPHONE NUM BER (SECR ET.
CHAPTER 4 NDA-24298 Page 670 Issu e 1 ASHCN : Assignment of Station Hunting Group - Circular for NDM ASHCN: Assignment of Station Huntin g Gr oup - Cir cular f or NDM 1. General This comma nd assigns t he data relat ed to the Stati on Hunting - Cir cular fo r Fusion Service .
NDA-24298 CHAPTER 4 Page 671 Issue 1 ASHCN : Assignment of Station Hun ting Group - Circular for NDM 4. Data Sheet USER GROUP NUMBER (UGN) TELEPHONE NUMBER (TELN) SECRET AR Y TELEPHONE NUMBER (SECRET .
CHAPTER 4 NDA-24298 Page 672 Issu e 1 ASHU : Assign ment of Station Hunting Group-UCD ASHU: Assignment of Statio n Hunting Group-UCD 1. General This command assign s the d ata rela ted to th e Uniform Cal l Distribut ion (UCD) service featu re. 2. Precautions 1.
NDA-24298 CHAPTER 4 Page 673 Issue 1 ASHU : Assignment of Station Hunting Group-UCD 3. Data Entry Instructi ons Note: Enter th e Station Number to be assi gne d in “ EDIT STN ” box on the display .
CHAPTER 4 NDA-24298 Page 674 Issu e 1 ASHU : Assign ment of Station Hunting Group-UCD 4. Data Sheet Note: Ente r first Station Num b er here . Th is Sta tion be com es the con trol stat ion.
NDA-24298 CHAPTER 4 Page 675 Issue 1 ASHUL : Assignment of Station Hunting Group-UCD for LDM ASHUL: Assignment o f Station Huntin g Gr oup-UCD for LDM 1. General This command assign s the dat a relate d to the Uni form Call Dist ributio n (UCD) servi ce featu re for ea ch Node by usi ng Tele phone Number.
CHAPTER 4 NDA-24298 Page 676 Issu e 1 ASHUL : Assignment of Station Hunting Group-UCD f or LDM 3. Data Entry Instructi ons Note: Enter the T elephone Numbe r to be assig ned in “ EDIT TELN ” box o n the displ ay. NUMBER OF STATIONS (CNT) NUMBER OF STATIONS (CNT) USER GROUP NUMBER (UGN) TELEPHONE NUMBER (TELN) Max.
NDA-24298 CHAPTER 4 Page 677 Issue 1 ASHUL : Assignment of Station Hunting Group-UCD for LDM 4. Data Sheet USER GROUP NUMBER (UGN) TELEPHONE NUMBER (TELN) NUMBER OF ST A TIONS (CNT) TELEPHONE NUMBER (.
CHAPTER 4 NDA-24298 Page 678 Issu e 1 ASHUN : Assignment of Station Hunting Group-UCD for NDM ASHUN: Assignment of Station Huntin g Group-UCD f or NDM 1. General This comma nd assigns t he data relat ed to the Unifo rm Call Distribu tion (UCD) for Fusion Servi ce.
NDA-24298 CHAPTER 4 Page 679 Issue 1 ASHUN : Assignment of Station Hunting Group-UCD for NDM 3. Data Entry Instructi ons Note: Enter the T elephone Numbe r to be assig ned in “ EDIT TELN ” box o n the displ ay. NUMBER OF STATIONS (CNT) NUMBER OF STATIONS (CNT) USER GROUP NUMBER (UGN) TELEPHONE NUMBER (TELN) Max.
CHAPTER 4 NDA-24298 Page 680 Issu e 1 ASHUN : Assignment of Station Hunting Group-UCD for NDM 4. Data Sheet USER GROUP NUMBER (UGN) TELEPHONE NUMBER (TELN) NUMBER OF ST A TIONS (CNT) TELEPHONE NUMBER .
NDA-24298 CHAPTER 4 Page 681 Issue 1 AUCD : Assignment of UCD Control Data A UCD: Assignment of UCD Contr ol Data 1. General This co mman d assig ns the m is cella neou s da ta relate d to th e Unifo r m Call Di strib ution (UCD ) servic e featur e. 2.
CHAPTER 4 NDA-24298 Page 682 Issu e 1 AUCD : Assignment of UCD Control Data 3. Data Entry Instructi ons Enter the number of calls in the UCD queue. (This value is used for UCD Peg Count.) QTH Enter the number of calls in the UCD queue. (This value is used for UCD Call Waiting Lamp on D term ).
NDA-24298 CHAPTER 4 Page 683 Issue 1 AUCD : Assignment of UCD Control Data 4. Data Sheet TENANT NUMBER (TN) ST A TI ON NUM BER (STN) UCD QUEU ING PE G COUNT V ALUE (QTH ACT) 0/1 UCD QUEUIN G PEG COUNT.
CHAPTER 4 NDA-24298 Page 684 Issu e 1 AUCDL : Assignment of UCD Control Data for LDM A UCDL: Assignment of UCD C ontrol Data for LDM 1. General This co mmand assig ns the miscel laneous dat a rela ted to the Unif orm Call Dist ribution (UCD) service feature for each Node by using Tel ephone Number.
NDA-24298 CHAPTER 4 Page 685 Issue 1 AUCDL : Assignment of UCD Control Data for LDM 3. Data Entry Instructi ons Enter the number of calls in the UCD queue.
CHAPTER 4 NDA-24298 Page 686 Issu e 1 AUCDL : Assignment of UCD Control Data for LDM 4. Data Sheet USER GRO UP NUM BER (UGN) TELEPHONE NUMBER (TELN) 16 digits maximum UCD QUEUING PEG COUN T VA L U E (.
NDA-24298 CHAPTER 4 Page 687 Issue 1 AUCDN : Assignment of UCD Control Data for NDM A UCDN: Assignment of UCD C ontrol Data for NDM 1. General This command assigns the miscel laneou s data related to the Uniform Cal l Distributi on (UCD) for Fusion Service .
CHAPTER 4 NDA-24298 Page 688 Issu e 1 AUCDN : Assignment of UCD Control Data for NDM 3. Data Entry Instructi ons Enter the number of calls in the UCD queue.
NDA-24298 CHAPTER 4 Page 689 Issue 1 AUCDN : Assignment of UCD Control Data for NDM 4. Data Sheet USER GRO UP NUM BER (UGN) TELEPHONE NUMBER (TELN) 16 digits maximum UCD QUEUING PEG COUN T VA L U E (Q.
CHAPTER 4 NDA-24298 Page 690 Issu e 1 AUOG : Assignment of UCD Overflo w Group A UOG: Assignment of UCD Overflow G roup 1. General This command assign s the data relate d to the Overflow - UCD servi ce feature. 2. Precautions 1. The UCD member station and the UCD pilot ( contr olli ng stat ion) stati on shoul d be as signed by the ASHU comm and.
NDA-24298 CHAPTER 4 Page 691 Issue 1 AUOG : Assignment of UCD Overflow Group 4. Data Sheet ORIGINAL UCD GR OUP O VERFLO W UCD GR OUP REMARKS TENANT NUMBER (TN-A) ST A TION NUMBER (STN- A) TENANT NUM B.
CHAPTER 4 NDA-24298 Page 692 Issu e 1 AUOGL : Assignment of UCD Overflow Group for LDM A UOGL: Assignment of U CD O verflow Group f or LDM 1. General This comma nd assigns t he data rel ated to the Overf low - UCD service featu r e for each Node by usin g Telephone Numb er.
NDA-24298 CHAPTER 4 Page 693 Issue 1 AUOGL : Assignment of UCD Overflow Group for LDM 4. Data Sheet ORIGINAL UCD GROUP O VERFLO W UCD GROUP USER GR OUP NUMBER (UGN-A) TELEPHONE NUMBER (TELN-A) USER GR.
CHAPTER 4 NDA-24298 Page 694 Issu e 1 AUOGN : Assignment of UCD Overflow G roup for NDM A UOGN: Assignment of UCD Overflow Gr oup f or NDM 1. General This command a ssigns t he data related to the Over flow - UCD for Fusion Servi ce.
NDA-24298 CHAPTER 4 Page 695 Issue 1 AUOGN : Assignment of UCD Overflow Group for NDM 4. Data Sheet ORIGINAL UCD GROUP O VERFLO W UCD GROUP USER GR OUP NUMBER (UGN-A) TELEPHONE NUMBER (TELN-A) USER GR.
CHAPTER 4 NDA-24298 Page 696 Issu e 1 AUAD : Assignment of UCD Delayed Announcement Data A U AD: Assignment of UCD Delayed Announcement Data 1. General This command assign s the data related to the Delay Announ cemen t - UCD service featu re. 2. Precautions 1.
NDA-24298 CHAPTER 4 Page 697 Issue 1 AUAD : Assignment of UCD Delayed Announcement Data 3. Data Entry Instructi ons NUMBER OF ANNOUNCEMENT TRUNK (CNT) 1-8 CONTROLLING STATION ANNOUNCEMENT TRUNK TN and STN DLYT Enter the delay timer value in second with a range of 0- 30 seconds.
CHAPTER 4 NDA-24298 Page 698 Issu e 1 AUAD : Assignment of UCD Delayed Announcement Data 4. Data Sheet CONTR OLLING ST A TI ON DELA Y TIMER (DL YT) 0-30 MESSAGE TIMER (MSGT ) 0-30 ANNOUNCEMENT OUTPUT .
NDA-24298 CHAPTER 4 Page 699 Issue 1 AUADL : Assignment of UCD Delayed Announcement Data for L DM A U AD L: Assign ment of UCD De layed An nounc ement Dat a fo r LDM 1. General This command assigns the data rel ated to the Del ay Announcemen t - UCD service feat ure for each Node by using Teleph one Number.
CHAPTER 4 NDA-24298 Page 700 Issu e 1 AUADL : Assignment of UCD Delayed Announceme nt Data for LDM 3. Data Entry Instructi ons NUMBER OF ANNOUNCEMENT TRUNK (CNT) 1-8 CONTROLLING STATION ANNOUNCEMENT TRUNK UGN and TELN DLYT Enter the delay timer value in second with a range of 0- 30 seconds.
NDA-24298 CHAPTER 4 Page 701 Issue 1 AUADL : Assignment of UCD Delayed Announcement Data for L DM 4. Data Sheet CONTROL LING ST A TION USER GRO UP NUM BER (UGN) TELEPHONE NUMBER (TELN) MAX .
CHAPTER 4 NDA-24298 Page 702 Issu e 1 AUADN : Assignment of UCD Delayed Announcement Data for NDM A U ADN: Assignment of UCD De layed Announcement Data for NDM 1. General This command assigns the d ata related to the Delay Announce m ent - UCD for Fusion Ser vice.
NDA-24298 CHAPTER 4 Page 703 Issue 1 AUADN : Assignment of UCD Delayed Announcement Data for NDM 3. Data Entry Instructi ons NUMBER OF ANNOUNCEMENT TRUNK (CNT) 1-8 CONTROLLING STATION ANNOUNCEMENT TRUNK UGN and TELN DLYT Enter the delay timer value in second with a range of 0- 30 seconds.
CHAPTER 4 NDA-24298 Page 704 Issu e 1 AUADN : Assignment of UCD Delayed Announcement Data for NDM 4. Data Sheet CONT R OL LIN G ST A TION DELA Y TIMER (DL YT) 0-30 MESSA GE TIMER (MSGT ) 0-30 ANNOUNCE.
NDA-24298 CHAPTER 4 Page 705 Issue 1 ACPG : Assignment of Call Pickup Group A CPG: Assignm ent of Call Pic kup Gr oup 1. General This command assign s call picku p group in the TN and STN. 2. Precautions 1. The maximum number of member statio ns within e ach Call Pi ckup Group i s 100.
CHAPTER 4 NDA-24298 Page 706 Issu e 1 ACPG : Assignment of Call Pickup Group 4. Data Sheet TENANT NUMBER (TN) ST A TION NUMBER (STN) NUMBER OF ST A TI ONS (CNT) ST A TION NUMBER (STN) NUMBER OF ST A T.
NDA-24298 CHAPTER 4 Page 707 Issue 1 ACPGL : As signment of Call Pickup Group for LDM A CPGL: Assignm ent o f Call Pic kup Group f or LDM 1. General This command assig ns th e dat a re lated t o Cal l Pic kup Gr oup - LDM servic e. With thi s command , Call P ickup Group ser vice feat ure can b e assigne d by using T elephone Number.
CHAPTER 4 NDA-24298 Page 708 Issu e 1 ACPGL : Assignment of Call Pick up Group for LDM 4. Data Sheet USER GROUP NUMBER (UGN) TELEPHONE NUMBER (TELN) NUMBER OF ST A TIONS (CNT) TELEPHONE NUMBER (TELN) .
NDA-24298 CHAPTER 4 Page 709 Issue 1 ACPGN : Assignment of Call Pickup Group for NDM A CPGN: A ssignment of Call Pickup Gr oup for NDM 1. General This comman d assign s Call Pick up Group for Fusion Serv ice in th e UGN and TELN.
CHAPTER 4 NDA-24298 Page 710 Issu e 1 ACPGN : Assignment of Call Pickup Group for NDM 4. Data Sheet USER GROUP NUMBER (UGN) TELEPHONE NUMBER (TELN) NUMBER OF ST A TIONS (CNT) TELEPHONE NUMBER (TELN) N.
NDA-24298 CHAPTER 4 Page 711 Issue 1 ACPE : Assignment of Call Pickup Expand Group Data A CPE: Assignm ent of Call Pickup Expand Gr oup Data 1. General This com man d as signs the Cal l Pick up Ex pand Gr oup data. 2. Precautions 1. Prior to this command , assignments of sta tion are required by t he A CPG command.
CHAPTER 4 NDA-24298 Page 712 Issu e 1 ACPE : Assignment of Ca ll Pickup Expand Group Data 4. Data Sheet TENANT NUMBER (TN) ST A TION NUMBER (STN) NUMBER OF ST A TIONS (CNT) ST A TION NUMBER (STN) NUMB.
NDA-24298 CHAPTER 4 Page 713 Issue 1 ACPEL : Assignmen t of Call Pickup Expand Group for L DM A CPEL: Assignment of Call Pic kup Expand Group f or LDM 1.
CHAPTER 4 NDA-24298 Page 714 Issu e 1 ACPEL : Assignment of Call Pi ckup Expand Group for LDM 4. Data Sheet USER GROUP NUMBER (UGN) TELEPHONE NUMBER (TELN) NUMBER OF ST A TIONS (CNT) TELEPHONE NUMBER .
NDA-24298 CHAPTER 4 Page 715 Issue 1 ACPEN : Assignment of Call Pickup Expand Group Data for NDM A CPEN: Assignment of Call Pickup Expand Group Data f or NDM 1.
CHAPTER 4 NDA-24298 Page 716 Issu e 1 ACPEN : Assignment of Call P ickup Expand Group Data for NDM 4. Data Sheet USER GROUP NUMBER (UGN) TELEPHONE NUMBER (TELN) NUMBER OF ST A TIONS (CNT) TELEPHONE NU.
NDA-24298 CHAPTER 4 Page 717 Issue 1 AISA : Assignment of Individual Calling Entry Area AISA: Assignment of Indivi dual Calling Entry Ar ea 1. General This co mmand desig nates the stat ion type (MST o r SLV) and the number of me mory blocks to be used for the Speed Callin g Group/Stati on.
CHAPTER 4 NDA-24298 Page 718 Issu e 1 AISA : Assignment of Individual Calling Entry Area 4. Data Sheet TENANT NUMBER (TN) MAST ER ST A TION NUMBER (STN) ST A TION TYPE M/S NUMBER OF BLOCKS (BLOCK) 1 .
NDA-24298 CHAPTER 4 Page 719 Issue 1 AISA_T :Assignment of Individual Sp eed Calling Entry Area – T elephone Number AISA_T :Assignment of Individual Spee d Calling Entry Area – T elephone Number 1.
CHAPTER 4 NDA-24298 Page 720 Issu e 1 AISA_T :Assignment of In dividual Speed Calling Entry Area – T elephone Number 3. Data Entry Instructi ons Note: The e xis ting data can be r eadout by pr essing “ Ge t ” b utton after UGN and TELN dat a is ente r ed.
NDA-24298 CHAPTER 4 Page 721 Issue 1 AISA_T :Assignment of Individual Sp eed Calling Entry Area – T elephone Number 4. Data Sheet USER GR OUP NUMBER (UGN ) TELEPHONE NUMBER (TE LN) Max. 16 digit s ST A TION TYPE (MST /SL V) NUMBER OF BLOCKS (BLOCK) 1-10 MASTER TELEPHONE NUMBER (TEL N) Max.
CHAPTER 4 NDA-24298 Page 722 Issu e 1 AISD : Assignment of In dividual Speed Calling Data AISD : Ass ign m e nt of Indiv idua l S peed C alli ng D a ta 1. General This co mmand assigns t he speed dia l number ( of the Speed Ca lling - Station s ervice fe ature) fo r a stati on, instea d of a st atio n us er ’ s regist ra tion.
NDA-24298 CHAPTER 4 Page 723 Issue 1 AISD : Assignment of Individual Spe ed Calling Data 4. Data Sheet TENANT NUM BER (TN) ST A TION NUMBER (STN) SPEED CALLING DIGIT CODE (SPD) 00 – 99 TELEPHONE NUMBER (TEL ) MAX.
CHAPTER 4 NDA-24298 Page 724 Issu e 1 AISD_T : Assignment of Individual Spe ed Calling Data – T e lephone Number AISD_T : Assignm ent of Indi vidual Speed C alling Data – T eleph one Number 1.
NDA-24298 CHAPTER 4 Page 725 Issue 1 AISD_T : Assignment of Individual Speed Calling Data – T elephone Number 3. Data Entry Instructi ons Note: The e xis ting data can be r eadout by pr essing “ Ge t ” b utton after UGN and TELN dat a is ente r ed.
CHAPTER 4 NDA-24298 Page 726 Issu e 1 AISD_T : Assignment of Individual Spe ed Calling Data – T e lephone Number 4. Data Sheet USER GR OUP NUMBER (UGN ) TELEPHONE NUMBER (TE LN) Max. 16 digit s SPEED CALLING DIGIT CODE (SPD) 00-99 TELEPHONE NUMBER (TE L) Max.
NDA-24298 CHAPTER 4 Page 727 Issue 1 ASGD : Assignment of Special Grou p Data ASGD: Assignment of Special Group Data 1. General This co mmand assigns the station number belonging to t he special gr oup which appli es to the foll owing servic e featur es: Of f Hook Alarm Priori ty Call Do Not Dist urb Room Cut Of f 2.
CHAPTER 4 NDA-24298 Page 728 Issu e 1 ASGD : Assignment of Special Group Data 4. Data Sheet TENANT NUMBER (TN) ST A TION NUMBER (STN) FUNCTION NUMBER (F) 0 – 7 GR OUP NUMBER (GN) 1 – 7 REMARKS.
NDA-24298 CHAPTER 4 Page 729 Issue 1 ASGD_T : Assignment of Special G roup Data – T e lephone Number ASGD_T : A ssignment of Special Group Data – Telephone Number 1. General This comma nd is used to ass ign the sta tions belon g to the speci al group which applies to Off Hook Alarm, Priori ty Cal l, Do Not Distur b, and Room Cut Off servic es.
CHAPTER 4 NDA-24298 Page 730 Issu e 1 ASGD_T : Assignment of Special Group Data – T elephone Number 3. Data Entry Instructi ons Note: The e xis ting data can be r eadout by pr essing “ Ge t ” b utton after UGN and TELN dat a is ente r ed. USER GROUP NUMBER (UGN) TELEPHONE NUMBER (TELN) Max.
NDA-24298 CHAPTER 4 Page 731 Issue 1 ASGD_T : Assignment of Special G roup Data – T e lephone Number 4. Data Sheet TENANT NUMBER (TN) FUNCTION NUMBER (F) 0-7 SPECI FIC TERMINA TING GROUP NUMBER (GN) 1-7 USER GROUP NUMBER (UGN) SPECIFIC TERMINA TING EQUIPMENT REMARKS S/A SPECIAL TELEPHO NE NUMBER (STELN) Max.
CHAPTER 4 NDA-24298 Page 732 Issu e 1 ASID : Assignment of Spe cial Incoming ASID: Assignment of Special Incoming 1. General This command assign s the call destin ati on of the fol lo w ing service fea tures: Of f Hook Alarm Attendan t Night T rans fer Priori ty Call Do not Disturb Room Cut Of f 2.
NDA-24298 CHAPTER 4 Page 733 Issue 1 ASID : Assignment of Special Incoming 3. Data Entry Instructi ons TENANT NUMBER (TN) SPECIAL STATION NUMBER (SSTN) SPECIFIC TERMINATING EQUIPMENT FUNCTION NUMBER (.
CHAPTER 4 NDA-24298 Page 734 Issu e 1 ASID : Assignment of Spe cial Incoming 4. Data Sheet TENANT NUMBER (TN) FUNCTION NUMBER (F) 0 – 7 GROUP NUMBER (GN) 1 – 7 SPECI FIC TERMI NA T ING EQU IPMEN T.
NDA-24298 CHAPTER 4 Page 735 Issue 1 ASID_T : Assignment of Special Incoming – T elephone Number ASID_T : Assignm ent of Special Incoming – Telephone Number 1.
CHAPTER 4 NDA-24298 Page 736 Issu e 1 ASID_T : Assignment of Special Incoming – T elephone Number 3. Data Entry Instructi ons Note: The e xis ting data can be r eadout by pr essing “ Ge t ” b utton after UGN and STELN dat a is enter ed.
NDA-24298 CHAPTER 4 Page 737 Issue 1 ASID_T : Assignment of Special Incoming – T elephone Number 4. Data Sheet TENANT NUMBER (TN) FUNCTION NUMBER (F) 0-7 SPECI FIC TERMINA TING GROUP NUMBER (GN) 1-7 USER GROUP NUMBER (UGN) SPECIFIC TERMINA TING EQUIPMENT REMARKS S/A SPECIAL TELEPHO NE NUMBER (STELN) Max.
CHAPTER 4 NDA-24298 Page 738 Issu e 1 A TTD : Assignment o f T runk T est Data A TTD: A ssignment of T runk T est Data 1. General This command a ssigns, deletes, and displays trunk connection test data. 2. Precautions It ca n no t be execu t ed to over w rite the e xisting data in this co mmand.
NDA-24298 CHAPTER 4 Page 739 Issue 1 A TTD : Assignment of T runk T est Data 4. Data Sheet (a) When TYPE=1 INFORMA TION TYPE (TYPE) 1/2 RO UT E TYPE (R T TYPE) 1/2 RO UT E NUMBER (RT) 1-255 LOGICAL ROU TE NUMBER (LGRT) 1-899 RESP ONSE P A TTERN (RESP) 1-3 DIAL CODE (DC) Max.
CHAPTER 4 NDA-24298 Page 740 Issu e 1 A TTD : Assignment o f T runk T est Data (b) When TYPE=2 INFORMA TION TYPE (T YPE) 1/2 LIN E EQ UI PMENT NUMBER (LENS) INDIVIDU AL TR UNK A CCESS CODE (A CC) Max. 3 Digits TENANT NUMBER (TN) 1-63 ST A TION NUMBER (STN) Max.
NDA-24298 CHAPTER 4 Page 741 Issue 1 ACFS : Assignment of Call Forwarding Station Data A CFS: Assignment of Call Forwarding Sta tion D ata 1. General This co m mand is us ed to set the Call Forwa rding - All Calls/Busy Line/Don ’ t Ans wer, a nd fu rthe r the Split C all Forwardi ng Service s.
CHAPTER 4 NDA-24298 Page 742 Issu e 1 ACFS : Ass ignment of Call Forwa rding Station Data 4. Data Sheet TENANT NUM BER (TN) ST A TION NUM BER (STN) CALL FOR W ARDING TYPE (TYP E) 1/2 RESTRICTED CALL KIND (RCV) 1/2 CAL L FOR W ARDING KIND V/B/D/N CALL FOR W ARDING DESTINA TION NUMBER (CFD) MAX.
NDA-24298 CHAPTER 4 Page 743 Issue 1 ACFS_T : Assignment of Call F orwarding Station Data – T elephone Number A CFS_T : Assignm ent of Call Forwar ding Station Data – Telephone Number 1.
CHAPTER 4 NDA-24298 Page 744 Issu e 1 ACFS_T : Assignment of Call Forwarding Station Data – Telephone Number 4. Data Sheet UGN TELEPHONE NUMBER (TE LN) Max. 16 digit s CALL FOR W ARDING TYPE (TYPE) KIND OF RECEIVED CALL (RCV) CALL FOR W ARDING KIND (SR V) CALL FOR W ARDING DESTINA TION NUMBE R (CFD) Max.
NDA-24298 CHAPTER 4 Page 745 Issue 1 ACFCL : Assignment of Call Forwarding b y SFC for LDM A CFCL : Assignment of Call Forw arding b y SFC f or L DM 1. General This comma nd is used to rea dout, assign , and delete the data related t o Call Forwardi ng feature s.
CHAPTER 4 NDA-24298 Page 746 Issu e 1 ACFCL : Assignment of Call Forwarding by SFC for LDM 4. Data Sheet (a) TYPE = 1 (ASYD SYS1, IN DEX5 bit0 = 0 and I NDEX79 bit2 = 0 is assigned ); (b) TYPE = 2 (AS.
NDA-24298 CHAPTER 4 Page 747 Issue 1 ACFCL : Assignment of Call Forwarding b y SFC for LDM (c) TYPE = 3 (ASYD SYS1, IN DEX5 bit0 = 0 and I NDEX79 bit2 = 1 is assigned ); DA Y / N I G H T MODE (D/N) TENANT NUM BER (TN) SER VICE FEA TURE CLASS (SFC) 0-15 CALL FO R W ARD ALL CALLS DESTIN ATION FOR ST A TIONS (CF AS) MAX.
CHAPTER 4 NDA-24298 Page 748 Issu e 1 ACFCL : Assignment of Call Forwarding by SFC for LDM (d) TYPE = 4 (ASYD SYS1, INDE X5 bit0 = 1 and I NDEX79 bit2 = 1 is as signed); DA Y / N I G H T MODE (D/N) TENANT NUM BER (TN) SER VICE FEA TURE CLASS (SFC) 0-15 CALL FORW ARD ALL CALLS DEST INA TION FOR S T ATIONS (CF A S) MAX.
NDA-24298 CHAPTER 4 Page 749 Issue 1 ASLU1 : Assignment of Slumber Ti me Data 1 ASLU1: Assignment of Slum ber T ime Data 1 1. General This command ass igns the data rela te d to the Slumber Time - Do Not Disturb service featu re.
CHAPTER 4 NDA-24298 Page 750 Issu e 1 ASLU1 : Assignment of Slumber T ime Data 1 4. Data Sheet TENANT NUMBER (TN) ST A TI ON NUMBER (STN) SLUMBER GROUP NUMBER (G) 1 – 7 REMARKS.
NDA-24298 CHAPTER 4 Page 751 Issue 1 ASLU1_T : Assignment of S lumber T ime Data 1 – T elephone Number ASLU1_T : Assignment of Slumber Time Data 1 – T eleph one Number 1. General This com mand is us ed to ass ign t he da ta relate d to the Slumb er Time - D o Not Di sturb serv ice f eatur e.
CHAPTER 4 NDA-24298 Page 752 Issu e 1 ASLU1_T : Assignment of Slumbe r Time Data 1 – T e lephone Number 4. Data Sheet USER GR OUP NUMBER (UGN ) TELEPHONE NUMBER (TE LN) Max.
NDA-24298 CHAPTER 4 Page 753 Issue 1 ASLU2 : Assignment of Slumber Ti me Data 2 ASLU2: Assignment of Slum ber T ime Data 2 1. General This command ass igns the data rela te d to the Slumber Time - Do Not Disturb service featu re. 2. Precautions 1. The slumber time per iod and the forw arded dest ination a re assign ed by this co mmand.
CHAPTER 4 NDA-24298 Page 754 Issu e 1 ASLU2 : Assignment of Slumber T ime Data 2 3. Data Entry Instructi ons SLUMBER TIME GR OUP NUMBER (G) 1-7 CNT 1-4 TRANSFER KIND (TFR) 1/2 SLUMBER TIME ST ART TIME SLUMBER TIME END TIME FR OM HOUR FROM MINUTE TO HOUR T O M INUTE G Enter th e number a ssigned by the ASLU1 comm and.
NDA-24298 CHAPTER 4 Page 755 Issue 1 ASLU2 : Assignment of Slumber Ti me Data 2 4. Data Sheet SLUMBER TIME GR OUP NUMBER (G) 1-7 CNT 1-4 TRANSFER KIND (TFR ) 1/2 SLUMBER TIME ST ART TI ME SLUMBER TIME.
CHAPTER 4 NDA-24298 Page 756 Issu e 1 ACSA : Assign ment of Connection S ervice Index A A CSA: Assignment of Con nection Service Index A 1. General This comma n d assi g ns the ca ll term inat io n for CA S Line an d Di re ct-in Term in a tion ( Day O n ly ).
NDA-24298 CHAPTER 4 Page 757 Issue 1 ACSA : Ass ignment of Connection S ervice Index A 4. Data Sheet ROUTE NUMBER (RT) TRUNK NUMBER (TK) CONNECTION SER VICE INDEX A (CSIA) 1 – 7 TERMINA TING ST A TION ABBREVIA TED DIGIT CODE (ADC) 4 DIGITS TENANT NUM BER (TN) ST A TION NUMBER (STN) MAX.
CHAPTER 4 NDA-24298 Page 758 Issu e 1 ACSAL : Assignment of Conne ction Service Index A for LDM A CSAL: Assignment of Connection Service I nde x A f or LDM 1. General This com mand assigns t he call ter minati on for CAS Line and Direct -in Terminat ion (Day Only) for the Loca l Node (LN) in Fusion networ k.
NDA-24298 CHAPTER 4 Page 759 Issue 1 ACSAL : Assignment of Connection Serv ice Index A for LDM 4. Data Sheet LOGICAL RO UT E NUMBER (LGRT) TR UNK NUMBER (TK) CONNECTION SER VIC E INDE X A (CSIA) 1 – 7 TERMINA TING ST A TION ABBREVIA TED DIGIT CODE (ADC) 4 DIGITS USER GR OUP NUMBER (UGN ) TELEPHONE NUMBER (TELN) MAX.
CHAPTER 4 NDA-24298 Page 760 Issu e 1 ACSI : Assignment of Connection Service Index Data A CSI: Assignment of Connection Servic e Inde x Data 1. General This comma nd assigns the call t erminati on for Direc t-in Terminat ion (Day and Night), Ni ght Connecti on and Rem ote A ccess to Sys tem.
NDA-24298 CHAPTER 4 Page 761 Issue 1 ACSI : Assignment of Connection Se rvice Index Data 3. Data Entry Instructi ons ROUTE NUMBER (RT) CONNECTION SERVICE INDEX (CSI) 1-7 TRUNK NUMBER (TN) TENANT NUMBE.
CHAPTER 4 NDA-24298 Page 762 Issu e 1 ACSI : Assignment of Connection Service Index Data 4. Data Sheet ROUTE NUMBER (RT) TR UNK NUMBER (TK) CONNECTION SER VICE IND EX (CSI) 1 – 7 TERMINA TING ST A T.
NDA-24298 CHAPTER 4 Page 763 Issue 1 ACSIL : Assignment of Connection Service Index Data for LDM A CSIL: Assignm ent of C onnection Ser vice Index Data f or LDM 1.
CHAPTER 4 NDA-24298 Page 764 Issu e 1 ACSIL : Assig nment of Connection S ervice Index Data for LDM 3. Data Entry Instructi ons LOGICAL ROUTE NUMBER (LGRT) CONNECTION SERVICE INDEX (CSI) 1-7 TRUNK NUM.
NDA-24298 CHAPTER 4 Page 765 Issue 1 ACSIL : Assignment of Connection Service Index Data for LDM 4. Data Sheet LOGICAL RO UT E NUMBER (LGRT) TRUNK NUMBER (TK) CONNECTION SER VICE INDEX (CSI ) 1 – 7 .
CHAPTER 4 NDA-24298 Page 766 Issu e 1 ANCD : Assignment of Night Connection Data ANCD: Assignment of Night Connection Data 1. General This command is used when the Power Fa ilure Transfer (PFT) c ircuit c ard is co ntrolle d by the exte rnal key. 2. Precautions 1.
NDA-24298 CHAPTER 4 Page 767 Issue 1 ANCD : Assignment of Night Connection Data 4. Data Sheet MODULE GR OUP NUMBER (MG) 00 - 31 PFT CARD NUMBER (NCU PKG) 0 - 3 PORT NUMBER OF PFT CARD (PORT) 0 - 11 RO.
CHAPTER 4 NDA-24298 Page 768 Issu e 1 ANCD_LR : Assignment of Night Connection Data – Logical Route Number ANCD_LR: Assignmen t of Night Connection Data – Logical Route Numb er 1. General This command is us ed when the Power F ailure Tran sfer (PFT) cir cuit car d is cont rolled by the ext ernal ke y.
NDA-24298 CHAPTER 4 Page 769 Issue 1 ANCD_LR : Assignment of Night Connection Data – Logical Route Number 4. Data Sheet FUSIO N POIN T CODE (FPC) 1-253 MODULE GR OUP NUMBER (MG) PFT CARD NUMBER (NCU.
CHAPTER 4 NDA-24298 Page 770 Issu e 1 A T AS : As signment T A S Servic e Data A T AS: Assignment T AS Service Data 1. General This command assign s the d ata rela ted to th e Trunk Answer From Any St ation (TAS) servi ce fea ture. 2. Precautions 1. One ten a nt can b e prov ided o n e TA S i n dicat or.
NDA-24298 CHAPTER 4 Page 771 Issue 1 A T AS : Assignment T AS Se rvice Data 4. Data Sheet TENANT NUMBER (TN) MODULE GROUP NUMBER (MG) MOUNTED UNIT NUMBER (UNIT) 0 - 3 CIRCUIT NUMBER (CN) 0/1 REMARKS.
CHAPTER 4 NDA-24298 Page 772 Issu e 1 AEKD : Assignment of External Ke y Data AEKD: Assignment of External K ey Data 1. General This comma nd as si gns the Exter nal Key rela ted dat a, which al lo ws a mainte nanc e per son t o ch ange the s yst em over to the Day/Night mode by means of ON/O FF on the PFT circuit card.
NDA-24298 CHAPTER 4 Page 773 Issue 1 AEKD : As sig n m en t of Exte rn al Key D at a 4. Data Sheet MODULE GROUP NUMBER (MG) 0-7 NCU CARD NUMBER (NCU PKG) 0/1 EXTERNAL KEY NUMBER (CTN) 0-7 CHANGE CONTR.
CHAPTER 4 NDA-24298 Page 774 Issu e 1 AAND : Assignment of Automatic Number Identification Data AAND: Assignment of A utomatic Numb er Identificatio n D ata 1.
NDA-24298 CHAPTER 4 Page 775 Issue 1 AAND : Assignment of Automatic Number Identification Data 4. Data Sheet (a) When ST A/A TT , t he I ndi vidual Atten dan t Number , is assign ed. Outgoing and Mai n Cen tr al ( A T = 0, CC = 0) Note: This paramet er can be assi gned whe n KT = 1.
CHAPTER 4 NDA-24298 Page 776 Issu e 1 AAND : Assignment of Automatic Number Identification Data (b) When ST A/A TT , the Indi vid ual Att endant Number , is assign ed.
NDA-24298 CHAPTER 4 Page 777 Issue 1 AAND : Assignment of Automatic Number Identification Data (c) When A TT , th e Indi vidua l Attenda nt Number , is not assi gned.
CHAPTER 4 NDA-24298 Page 778 Issu e 1 AAND_LR : Assignment of Automatic Number Identification Data – Logical Route Number AAND_LR: Assignmen t of A utomatic Number Identification Data – Logical Route Number 1.
NDA-24298 CHAPTER 4 Page 779 Issue 1 AAND_LR : Assignment of Automatic Number Identification Data – Logical Route Number 4. Data Sheet (a) Wh e n A T = ST A outg oi ng, CC = Main C entra l is select ed; Note: This par ameter can be assi gned when “ KT = ON.
CHAPTER 4 NDA-24298 Page 780 Issu e 1 AAND_LR : Assignment of Automatic Number Identification Data – Logical Route Number (b) Wh en A T = ST A , CC = Sate llite C entr al is sele cted; LOGICAL ROU T.
NDA-24298 CHAPTER 4 Page 781 Issue 1 AAND_LR : Assignment of Automatic Number Identification Data – Logical Route Number (c) When A T = A TT outgoing is selec ted; LOGICAL RO UT E NUMBER (LGRT) 1-899 FUSION POINT CODE (FPC) 1-253 OUTSID E RO UT E NUMBER (RT) 1- ST A/A TT OUTGOING (A T) OFFICE CODE (DC) MAX.
CHAPTER 4 NDA-24298 Page 782 Issu e 1 AANDE : Assignment of Automatic Number Identification Expansion Data AANDE: Assignment of A utomatic Number Identification Expansion Data 1.
NDA-24298 CHAPTER 4 Page 783 Issue 1 AANDE : Assignment of Automatic Number Identification Expansion Data 4. Data Sheet TENANT NUMBER (TN) CALL ORIGINA TOR (SKIP) 0 - 10 OFFICE CODE T O BE ADDED (ADD) 1 - 10 OFFICE CODE (DC) MAX.
CHAPTER 4 NDA-24298 Page 784 Issu e 1 AANI : Assignment of ANI Data AANI: Assignment of ANI Data 1. General This co m man d assign s Automati c Number Ident ificat ion (ANI) data s ent per tena nt by the request from oppos ite office . 2. Precautions 1.
NDA-24298 CHAPTER 4 Page 785 Issue 1 AANI : Assignment of ANI Data 4. Data Sheet TENANT NUMBER (TN) CALL NUMBER OF T OLL (TS) MAXIMUM 8 DIGITS CALL NUMBER OF LOCAL (LS) MAXIMUM 8 D IGITS LISTED DIREC .
CHAPTER 4 NDA-24298 Page 786 Issu e 1 ASPD : Assignment of Speed Calling ASPD: Assignment of Speed Calling 1. General This comma nd as si gns th e spe ed cal li ng nu m ber corres ponding to each A bbrev iated Digi t Code (ADC).
NDA-24298 CHAPTER 4 Page 787 Issue 1 ASPD : Assignment of Speed Ca lling 3. Data Entry Instructi ons 4. Data Sheet TENANT NUMBER (TN) ABBREVIA TED DIGIT CODE (ADC) MAX.
CHAPTER 4 NDA-24298 Page 788 Issu e 1 AA TC : Assignment of Authorizat ion Code Data AA TC: Assignment of A uthorization Co de Data 1. General This comma nd assigns t he Authoriz ation Code t hat is used f or Authori zation Code/ Forced Accou nt Code/Pa d Lock, and Remot e Access t o system fe atures.
NDA-24298 CHAPTER 4 Page 789 Issue 1 AA TC : Assignment of Authoriza tion Code Data 4. Data Sheet (a) When SFC and RSC are assigned for each Auth ori zation Code (A CR = 1) TENANT NUMBER (TN) A UTHOR .
CHAPTER 4 NDA-24298 Page 790 Issu e 1 AA TC : Assignment of Authorizat ion Code Data (b) When SFC and RSC are no t assigne d for each Aut horizati on Code (A CR = 2) TENANT NUMBER (TN) A UTHORIZA TION.
NDA-24298 CHAPTER 4 Page 791 Issue 1 ACFO : Assignment of Call Forwarding Data A CFO: Assignment of Call F orwar ding Data 1. General This co mmand assigns v arious call fo rwarding ser vice data on a te nant basi s. The destina tions of forw arded call s can be t he at tendant console, a stat ion, or an ou tside par ty.
CHAPTER 4 NDA-24298 Page 792 Issu e 1 ACFO : Assignment of Call Forwarding Da ta 4. Data Sheet TENANT NUMBER (TN) CALL FOR W ARDING SER VICE CALL FOR W ARDING DES TINA TIO N AND ST A TION NUM BER ABBREVIA TED DIGIT CODE (ADC) 4 DIGITS REMARKS TYPE OF C.
NDA-24298 CHAPTER 4 Page 793 Issue 1 ACFO_T : Assignment of Call Forwarding Data – T elephone Number A CFO_T : Assi gnm ent of Call Forwar ding D ata – T elephone Number 1. General This command is use d to assi gn various call for wardin g service data on a t enant bas is.
CHAPTER 4 NDA-24298 Page 794 Issu e 1 ACFO_T : Assignment of Call Forwarding Data – T elephone Number 4. Data Sheet TENANT NUMBER (TN) CALL FO R WARDING SER VICE (CF) CALL FOR W ARD ING DESTINA TION ABBREVIA TE DIGIT CODE (ADC) Max. 4 digits (CFI) (UGN) TELEPHONE NUMBER (TELN) Max.
NDA-24298 CHAPTER 4 Page 795 Issue 1 ACDN : Assignment of Number of Digits for Consecutive Dialing Data A CDN: Assignment of Number of Digits f o r Co nsecutive Dialing Data 1. General This command assign s the number of digit s to be ad ded to the access cod e of a d istant o ffice that has bee n assig ned via th e A MND c omm an d .
CHAPTER 4 NDA-24298 Page 796 Issu e 1 ACDN : Assignment of Number of Digits for Consecutive Diali ng Data 4. Data Sheet TENANT NUMBER (TN) DESTINA TION CODE (DC) MAX.
NDA-24298 CHAPTER 4 Page 797 Issue 1 AARS : Assignment of Alternati ve Route Service Res triction AARS: Assignment of Alternative Route Service Restriction 1.
CHAPTER 4 NDA-24298 Page 798 Issu e 1 AARS : Ass ignment of Alternative Route S ervice Restriction 4. Data Sheet INCOMING RO UT E NUMBER (ICRT) OUTGOING R OUTE NUMBER (OGR T) ROU TE SE R VI CE (RSV) 0.
NDA-24298 CHAPTER 4 Page 799 Issue 1 AARSN : Assignment of Alternati ve Route Service Restriction for NDM AARSN: Assignment of Alternative Route Service Restriction f or NDM 1.
CHAPTER 4 NDA-24298 Page 800 Issu e 1 AARSN : Assignment of Alternative Route Service Restriction for NDM 4. Data Sheet INCOMING LOGICAL ROUTE NUMBER (IC_LGRT) 1-899 OUTGOING LOGICAL ROU TE N UMB ER (.
NDA-24298 CHAPTER 4 Page 801 Issue 1 ALPE: Assi gnment of Line Privacy Expansion Data ALPE:Assignment of Line Priva cy Expansion Data 1. General This comma nd assigns t he eight-pa rty Confer ence Trunk (CFT ca rd), which is seized i n Line Privac y Expansion Service on a per-tena nt basis.
CHAPTER 4 NDA-24298 Page 802 Issu e 1 ALPE: Assignment of Line Privacy Expansion Data 4. Data Sheet TENANT FLA G (TNF) 0/1 TENANT NUMBER (TN) ST A TION NUMBER (STN) MAX.
NDA-24298 CHAPTER 4 Page 803 Issue 1 ARPC : Assignment of Remote Point Code for Central ized Service ARPC: Assignment of Remote P oint Cod e for Centralized Service 1. General This command ass igns the data rela ted to the Message Cent er In ter fa ce - CCIS service featu re .
CHAPTER 4 NDA-24298 Page 804 Issu e 1 ARPC : Assignment of Remote Point Code for Centra lized Service 4. Data Sheet CENTRALIZED SER VICE NUMBER (CSN) 1-7 REMO TE POINT CODE COUNTER (CNT) 1-32 REMO TE .
NDA-24298 CHAPTER 4 Page 805 Issue 1 ARDN : Assignment of Remote Control Day/Night ARDN: Assignment of Remote Control Da y/Nig ht 1. General This command assign s the d ata rela ted to th e Central ized Day/Ni ght Mode Cha nge ser vice fea ture. 2. Precautions 1.
CHAPTER 4 NDA-24298 Page 806 Issu e 1 ARDN : Assignment of Remote Control Day /Night 3. Data Entry Instructi ons 4. Data Sheet POINT CODE INDEX (INDEX) 0 – 15 POINT COD E (PC) 1 – 16383 R EMARKS 0.
NDA-24298 CHAPTER 4 Page 807 Issue 1 ACDD : Assignment of Change Digit Code for Dial in Service A CDD: Assignment of Chang e Digit Code for Dial in Service 1. General This command assign s the Change Digit Code for th e ISDN line with DID Addre ss ing.
CHAPTER 4 NDA-24298 Page 808 Issu e 1 ACDD : Assignment of Change Digit Code for Dial in Service 4. Data Sheet DA Y / N I G H T MODE (D A Y/NIGHT) D/N RO UT E NUMBER (RT) DIGIT CODE (DC) MAX.
NDA-24298 CHAPTER 4 Page 809 Issue 1 ACDD_LR : Assignment of Change Digit Code for Dial In Ser vice – Logical Route Number A CDD_LR: Assignment of Chang e Digit Code for Dial In Servi ce – Lo gical Route Number 1. General This command is used to assig n the Change Digit Code for the ISDN line with DID Addressing.
CHAPTER 4 NDA-24298 Page 810 Issu e 1 ACDD_LR : Assignment of Chan ge Digit Code for Dial In Service – Logical Ro ute Number 4. Data Sheet DA Y / NIGHT MODE (D/N) LOGICAL RO UT E NUM BER (LGRT) 1-899 FUSION POINT CODE (FPC) 1-253 EXTERNAL ROUTE NUMBER (RT) DIGIT CODE (DC) MAX.
NDA-24298 CHAPTER 4 Page 811 Issue 1 ACNP : Assignment of Calling Number Pattern A CNP: Assignment of Callin g Number P attern 1. General This com mand assigns t he Calling Number Patt ern (CNP) to th e route tha t is used for the SID To Netw ork- Present servi ce/for t he Call ing Part y Recogniti on servic e.
CHAPTER 4 NDA-24298 Page 812 Issu e 1 ACNP : Assignment of Calling Number Pattern 4. Data Sheet KIND OF CONNECTION (IC/OG) I/O ROU TE NUMBER (R T) CALLING NUM BER P A TTERN (CNP) 1 – 255 REMARKS.
NDA-24298 CHAPTER 4 Page 813 Issue 1 ACNPN : Assignment of Calling Number P attern for NDM A CNPN: Assignment of Cal ling Numb er P attern for NDM 1. General This comma nd assi gns th e Calli ng Nu mber Patter n (CN P) to the route wh ich is used for th e SID To Networ k- Prese nt se rvice /for t he Call ing Pa rty R ecogn ition servic e.
CHAPTER 4 NDA-24298 Page 814 Issu e 1 ACNPN : Assignment of Calling Number Pattern for NDM 4. Data Sheet KIND OF CONNECTION (IC/OG) I/O LOGICAL ROU TE NUMBER (LGRT) CALLING NUM BER P A TTERN (CNP) 1 .
NDA-24298 CHAPTER 4 Page 815 Issue 1 ACND : Assignment of Calling Number Data A CND: Assignmen t of C alling Number Data 1. General This com mand assigns the Servi ce Iden tificat ion Number (SI D) sent to the ISDN fo r the SID To Net work - Prese nt ser vice f or the Calli ng Pa rty R ecogn ition ser vice.
CHAPTER 4 NDA-24298 Page 816 Issu e 1 ACND : Assignment of Calling Number Data 4. Data Sheet CALLING NUMBER P A TTERN (CNP) 0 - 255 SKIP DIG IT (SKIP) 0 - 24 NUMBER OF DIGITS OF THE ADDITIONAL NUMBER (ADD) 0 - 24 DIGIT CODE OF THE ADDITIONAL NUMBER (DC) MAX.
NDA-24298 CHAPTER 4 Page 817 Issue 1 ACNDN : Assignment of Call ing Number Data for NDM A CNDN: Assignment of Calling Num ber Data fo r NDM 1. General This com mand assign s the St ation Number Identif ication (SID) s ent to the ISDN for the SID To Net work - Prese nt se rvice /for t he Call ing Pa rty R ecogn ition servic e.
CHAPTER 4 NDA-24298 Page 818 Issu e 1 ACNDN : Assignment of Calling Number Data for NDM 4. Data Sheet CALLING NUMBER P A TTERN (CNP) 0 - 1023 SKIP DIG IT (SKIP) 0 - 24 NUMBER OF DIGITS OF THE ADDITIONAL NUMBER (ADD) 0 - 24 DIGIT CODE OF THE ADDITIONAL NUMBER (DC) MAX.
NDA-24298 CHAPTER 4 Page 819 Issue 1 ACPNCL : Assignment of Calling Party Number Conversion for LDM A CPNCL: Assignment of Calling P ar ty Number Con ver sion f or LDM 1. General This command a ssigns skip and ad diti onal digit s informat ion for Out going Route Number.
CHAPTER 4 NDA-24298 Page 820 Issu e 1 ACPNCL : Assignment of Calling Party Number Conversion for LDM 4. Data Sheet OUTGOING ROU T E NUMBER (OGRT) 1-255 RECEIVED CALLING P ART Y NUMBER (RCPN) Max. 24 digits NUMBER OF DIGIT T O BE SKIPPED (SKI P) 0-24 NUMBER OF ADDITIONAL DIGIT CODE (ADD) 0-24 CALLING P ARTY NUMBER T O BE ADDED (A CPN) Max.
NDA-24298 CHAPTER 4 Page 821 Issue 1 ACPNCN : Assignment of Calling Party Number Conversion for NDM A CPNCN: Assignment of Calling P arty Nu mber Con versi on f or NDM 1. General This command a ssigns ski p and ad ditional di gits inf ormation fo r Outgoing Lo gical Rout e Number.
CHAPTER 4 NDA-24298 Page 822 Issu e 1 ACPNCN : Assignment of Calling Party Number Conver sion for ND M 4. Data Sheet OUTGOING LOGICAL ROU T E NUMBER (OGRT) 1-899 RECEIVED CALLING P ART Y NUMBER (RCPN) Max. 24 digits NUMBER OF DIGIT T O BE SKIPPED (SKI P) 0-24 NUMBER OF ADDITIONAL DIGIT CODE (ADD) 0-24 CALLING P ARTY NUMBER T O BE ADDED (A CPN) Max.
NDA-24298 CHAPTER 4 Page 823 Issue 1 AFCP : Assignment of Call For warding Service by Calling Number AFCP: Assignment of Call For war ding Service by Calling Number 1. General This command assign s the d ata rela ted to th e Calling Party Recogn itio n Service o f ISDN.
CHAPTER 4 NDA-24298 Page 824 Issu e 1 AFCP : Assi gnment of Call Forwa rding Service by Calling Number 3. Data Entry Instructi ons INFORMATION TRANSFER (ITC) 0-2 CALLING PARTY NUMBER (CALLING PARTY) MAX.
NDA-24298 CHAPTER 4 Page 825 Issue 1 AFCP : Assignment of Call For warding Service by Calling Number 4. Data Sheet (a) Ca ll Forwardin g Dest in ation is a statio n. (b) Call F orwar ding Desti nation is a n A TTCON. D A Y/NIGHT MODE (D A Y/ NIGHT) D/N TENANT NUMBER (TN) CALLING P ART Y NUMBER (CALLING P ARTY) MAX.
CHAPTER 4 NDA-24298 Page 826 Issu e 1 AFCP : Assi gnment of Call Forwa rding Service by Calling Number (c) Ca ll Forwardin g De st inatio n is a C.O. Line . DA Y / NIGHT MODE (D A Y/ NIGHT) D/N TENANT NUMBER (TN) CALLING PA R T Y NUMBER (CALLING P ARTY) MAX.
NDA-24298 CHAPTER 4 Page 827 Issue 1 AFCP_T : Ass ignment of Call Forwa rding Service by Calling Number – T elephone Number AFCP_T : Assignment of Call Forwar ding Service b y Calling Number – Te l e - phone Number 1. General This command i s use d to assig n/delete the data relate d to the Ca lling Pa rty Recogn ition Service of ISDN.
CHAPTER 4 NDA-24298 Page 828 Issu e 1 AFCP_T : Assignment of Call Forwarding Service by Calling Number – T ele phone Number 3. D a ta En tr y I nstr uctio n Note: The e xis ting data can be r eadout by pr essing “ Ge t ” b utton after UGN and TELN dat a is ente r ed.
NDA-24298 CHAPTER 4 Page 829 Issue 1 AFCP_T : Ass ignment of Call Forwa rding Service by Calling Number – T elephone Number 4. Data Sheet (a) Call F orwar ding Desti nation i s a st ation (CFD = T el ephone Number) . DA Y / N I G H T (D/N) USER GROUP NUMBER (UGN) CALLING P ARTY NUMBER (CALLI NG P ARTY) Max.
CHAPTER 4 NDA-24298 Page 830 Issu e 1 AFCP_T : Assignment of Call Forwarding Service by Calling Number – T ele phone Number (b) Call F orwar ding Desti nation is a n A TTCON (CFD = A TT) (c) Ca ll Forwardin g Dest inatio n is a C.O. L i ne (CF D = Ex te rnal) D/N UGN CALLING P AR TY NUMBER (CALLING P AR TY) Max.
NDA-24298 CHAPTER 4 Page 831 Issue 1 ACBC : Assignment of Call by Cal l Service Data A CBC: Assignment of Call b y Call Service Data 1. General This command assign s the Call by Call In for mation for an ISDN Network. 2. Precautions 1. Before assigning data, assi gn the Outgoing Route Sel ect io n P attern Number (OPR) using the A OPR com- mand.
CHAPTER 4 NDA-24298 Page 832 Issu e 1 ACBC : Assignment of Call by Call Serv ice Data 3. Data Entry Instructi ons ORDER OF ROUTE ADVANCING (RA) 0-7 SERVICE MODE INTERFACE TYPE (INTF) 1/5/7/10 NUMBERING PLAN IDENTIFICA- TION (NPI) 0-15 TYPE OF NUMBER (TON) 0-7 FEATURE/ SERVICE (SERV) 0-2 FACILITY FAILURE (CODE) 0-31 SCC DISTINGUISH NUMBER (SCC) MAX.
NDA-24298 CHAPTER 4 Page 833 Issue 1 ACBC : Assignment of Call by Cal l Service Data T able 4-29 Co de WHEN APPLICABLE D A T A AN D MEANINGS INTF = 1 (N -ISD N2) 17 = INW A TS Selection 18 = OUTW A TS.
CHAPTER 4 NDA-24298 Page 834 Issu e 1 ACBC : Assignment of Call by Call Serv ice Data 4. Data Sheet TIME OF D A Y CHANGE P A TTERN (TDPTN) 0-7 OUTGOING ROUTE SELECTION P A TTERN NUMBER (OPR) 0-4095 OR.
NDA-24298 CHAPTER 4 Page 835 Issue 1 AREF : Assignment of Reference Number Infor mation Data AREF: Assignment of Ref erence Number Inf ormation Data 1. General This command is used to as sign Referenc e Number for ISDN feature. 2. Precautions None 3. Data Entry Instructi ons REMARKS REFERENCE NUMBER (REF) MAX.
CHAPTER 4 NDA-24298 Page 836 Issu e 1 AREF : As signment of Reference Number Information Data 4. Data Sheet REFERENCE NUMBER (REF) MAX. 18 DIGITS [0-9, *, #] OUT SIDE ROU T E NUMBER (R T) TR UNK NUMBE.
NDA-24298 CHAPTER 4 Page 837 Issue 1 AREF_LR : Assignment of Reference Number Information Data – Logical Route Number AREF_LR: Assignment o f Ref erence Number Information Data – Logical Route Number 1. General This command is used to as sign Referen ce Number for ISDN feature.
CHAPTER 4 NDA-24298 Page 838 Issu e 1 AREF_LR : Assignment of Reference Number Infor mation Data – Logical Route Number 4. Data Sheet FUSION POINT CODE (FPC) 1-253 REFERENCE NUMBER (REF) MAX.
NDA-24298 CHAPTER 4 Page 839 Issue 1 A VTC : Assignment of Vi rtual T ie Line Call Data A VTC: A ssignm ent of Vi r tual Tie Lin e Call Data 1. General This command assign s Virtual Ti e Line Numbers to be used in Virtua l Tie Line Service. 2. Precautions 1.
CHAPTER 4 NDA-24298 Page 840 Issu e 1 A VTC : Assignment of V irtual T ie Line Call Data 4. Data Sheet TENANT NUMBER (TN) ST A TION NUMBER (STN) REMARKS.
NDA-24298 CHAPTER 4 Page 841 Issue 1 A VTL : Assignment of V irtual Tie Line Data A VTL: A ssignm ent of Vi r tual Tie Lin e Data 1. General This command as signs a schedule for Vi rtual Tie Line impleme ntation period in Virtual Tie Line Service. 2. Precautions 1.
CHAPTER 4 NDA-24298 Page 842 Issu e 1 A VTL : Assignment of V irtual Tie Line Data 6. When the Da te Ran ge is o ne day , only th e sta rting w eek is displ ayed.
NDA-24298 CHAPTER 4 Page 843 Issue 1 A VTL : Assignment of V irtual Tie Line Data 4. Data Sheet KIND OF TIE LINE (TL/SPC) T/S DA T E P A T T E R N NUMBER (PTN) 0-15 INCOMING/ OUTGOING (OG/IC) O/I OUTS.
CHAPTER 4 NDA-24298 Page 844 Issu e 1 A VTM : Assignment of Vi rtual Tie Line Manual A VTM: Assignm ent of Vi r tual Tie Line Manual 1. General This command immediat el y activates Vir tual Tie Line. 2. Precautions This command is used in th e following condi ti ons: • When a fai lure occur s in a V irtu al T ie Line, causi ng a li nk releas e.
NDA-24298 CHAPTER 4 Page 845 Issue 1 AEVT : Assignment of V irtual T ie Line Data for Event Based CCIS AEVT: Assi gnme nt o f Virtual Tie Li ne Da ta f or Even t Ba sed CCIS 1. General This command assign s Virtual Ti e Line data fo r Event Based CCIS.
CHAPTER 4 NDA-24298 Page 846 Issu e 1 AEVT : Assignment of Virtual T ie Line Data for Event Based CCIS TYPE 1=Separate Channel System 2=Separate Channel System (for Call-By-Call) 3=Common Channel Syst.
NDA-24298 CHAPTER 4 Page 847 Issue 1 AEVT : Assignment of V irtual T ie Line Data for Event Based CCIS ♦ When FUNC=2 is assigned FUNCTION POINT CODE (PC) 1-16367 ROUTE NUMBER (RT) 1-255 2 PC Point c.
CHAPTER 4 NDA-24298 Page 848 Issu e 1 AEVT : Assignment of Virtual T ie Line Data for Event Based CCIS 4. Data Sheet (a) FUNCTION = 1 and TYPE = 1/2 (OPR and RA paramete rs ar e a va ilable f or TYPE .
NDA-24298 CHAPTER 4 Page 849 Issue 1 AEVT : Assignment of V irtual T ie Line Data for Event Based CCIS (b) FUNCTION = 1 and TYPE = 3/ 4 ( “ OPR ” and “ RA ” parame ters are availabl e for TY P.
CHAPTER 4 NDA-24298 Page 850 Issu e 1 AEVT : Assignment of Virtual T ie Line Data for Event Based CCIS (c) FUNCTION = 2 (E-CCIS R T is set for each ter minating n ode) POI NT CODE (PC) 1-16367 ROUTE N.
NDA-24298 CHAPTER 4 Page 851 Issue 1 AITD : Assignment of ISDN T erminal Data AITD : Ass ignm ent of ISD N T ermin al Data 1. General This command assign s ISDN terminal dat a and FID to only B1 channel. 2. Precautions None 3. Data Entry Instructi ons FUNCTION (FUNC) 1/2 TENANT NUMBER (TN) 1-63 STATION NUMBER (STN) Max.
CHAPTER 4 NDA-24298 Page 852 Issu e 1 AITD : Assignment of ISDN T erminal Data 4. Data Sheet FUNCTION (FUNC) 1/2 TENANT NUMBER (TN) 1-63 ST A TION NUMBER (STN) Max.
NDA-24298 CHAPTER 4 Page 853 Issue 1 AITD_T : Assignment of ISDN T e rminal Data – T elephone Number AITD_T : Assignment of ISDN T erminal Data – Telephone Number 1. General This command is us ed to as sign ISDN t erminal da ta and FI D to only B1 channe l.
CHAPTER 4 NDA-24298 Page 854 Issu e 1 AITD_T : Assignment of ISDN T erminal Data – T elephone Number 4. Data Sheet FUNCTION (FUNC) USER GROUP NUMBER (UGN) TELEPHONE NUMBER (TE LN) Max.
NDA-24298 CHAPTER 4 Page 855 Issue 1 ACRD : As signment of Connection Route Class Data for Loca l Data Memory A CRD: Assignment of Connection Route Class Data f or Local Data Memory 1. General This comma nd assigns th e related da ta for the c onnection route used for B- channel and D- channel in the Fusion Network l ink.
CHAPTER 4 NDA-24298 Page 856 Issu e 1 ACRD : Assignment of Connection Route Class Data for Local Data Memory 4. Data Sheet CDN CONNECTION R T No. (C_RT) 1-1023 FUNCTION (FUNC) 1 TF - T ype of T runk 0.
NDA-24298 CHAPTER 4 Page 857 Issue 1 ACRD : As signment of Connection Route Class Data for Loca l Data Memory 9 FINT - Fusion Interf ace Specification 0= F U S I O N s t a n d a r d 1 - 15 = - 00000 0.
CHAPTER 4 NDA-24298 Page 858 Issu e 1 AFPD : Assignmen t of Fusion T andem P AD D ata for LDM AFPD: Assignment of Fusio n T andem P AD D ata f or LDM 1. General This command assign s PAD data for the conne ct ion rou te . 2. Precautions 1. This data ha s priori ty o ver the data assigned by PAD in comman d ACRD .
NDA-24298 CHAPTER 4 Page 859 Issue 1 AFP D : Ass ig nm ent of Fus i o n T a nde m P A D Da t a fo r LD M 3. Data Entry Instructi ons Note: P AD value dif fe rs dep ending on the specif i catio n of eac h cir cuit car d. As to the detail sett ing of P AD value on eac h cir cuit car d, r efer to the Cir cuit Car d Manual or r elated system manuals .
CHAPTER 4 NDA-24298 Page 860 Issu e 1 AFPD : Assignmen t of Fusion T andem P AD D ata for LDM Note: P AD value dif fe rs dep ending on the specif i catio n of eac h cir cuit car d. As to the detail sett ing of P AD value on eac h cir cuit car d, r efer to the Cir cuit Car d Manual or r elated system manuals .
NDA-24298 CHAPTER 4 Page 861 Issue 1 AFP D : Ass ig nm ent of Fus i o n T a nde m P A D Da t a fo r LD M (a) R T → C_R T TYPE O F CONNECTION (TYPE) INCOMING R OUTE (IC R T) 1-899 OUTGOING CONN EC TI.
CHAPTER 4 NDA-24298 Page 862 Issu e 1 AFPD : Assignmen t of Fusion T andem P AD D ata for LDM (b) C _R T → C_R T TYPE OF CONNECTION (T YPE) IN COMI NG CONNECTION ROUTE (IC C_RT) 1-1023 OUTGOING CONN.
NDA-24298 CHAPTER 4 Page 863 Issue 1 AFP D : Ass ig nm ent of Fus i o n T a nde m P A D Da t a fo r LD M (c) C_ R T → RT TYPE O F CONNECTION (TYPE) IN COMI NG CONNECTION ROUTE (IC C_RT) 1-1023 OUTGO.
CHAPTER 4 NDA-24298 Page 864 Issu e 1 AFPD : Assignmen t of Fusion T andem P AD D ata for LDM (d) STN ← → C_R T TYPE OF CONNECTION (TYP E) SER VICE FEA TURE RESTRICTION CLASS (SFC) 0-15 CONN EC TI.
NDA-24298 CHAPTER 4 Page 865 Issue 1 ACTK : Assignment of Connection T runk Data for Local Data Memory A CTK: Assignment of C onnection T r unk Data for Local Data Memory 1. General This command assign s the connection tr unk use d in the Fusion Net wo rk li nk.
CHAPTER 4 NDA-24298 Page 866 Issu e 1 ACTK : Assignment of Connection T runk Data for Local Data Memor y 4. Data Sheet CON NEC TI ON ROUTE NUMBER (C_RT) 1-1023 CONNECTION TRUNK NUMBER (C_T K) 1-4095 C.
NDA-24298 CHAPTER 4 Page 867 Issue 1 ACTKC : Assignment of Connection T runk Data for LDM A CTKC: Assignment of Conn ection T runk Data f or LDM 1. General This co mma nd ass ig ns and delet es t he co nne c ti on tr unk data fo r B -channel/D-channe l route b y des i g n ating t he range of trunk numbers a nd LENS.
CHAPTER 4 NDA-24298 Page 868 Issu e 1 ACTKC : Assignment of Connection T runk Data for LDM [Detail s on Trunk Ar rangement “ TYPE ” ] When assigni ng the consec utive tru nk data using the ACTKC command, you must select the trunk arran gement type (1- 6) in the “ TYPE ” param eter.
NDA-24298 CHAPTER 4 Page 869 Issue 1 ACTKC : Assignment of Connection T runk Data for LDM • TYPE=2 (Le vel → Unit → Group) T runk data is arra nged in the fo ll owing numerical order: • TYPE=3.
CHAPTER 4 NDA-24298 Page 870 Issu e 1 ACTKC : Assignment of Connection T runk Data for LDM • TYPE=4 (Group → Unit → Le vel) T runk data is arra nged in the fo ll owing numerical order: • TYPE=.
NDA-24298 CHAPTER 4 Page 871 Issue 1 ACTKC : Assignment of Connection T runk Data for LDM • TYPE=6 (Unit → Group → Le vel) T runk data is arra nged in the fo ll owing numerical order: LV 7 LV 6 .
CHAPTER 4 NDA-24298 Page 872 Issu e 1 ACTKC : Assignment of Connection T runk Data for LDM 4. Data Sheet CONNECTION RO UT E NUMBER (C_R T) 1-1023 CONNECTION TR UNK NUMBER (C_TK) 1-4095 COUNT UP STEP (.
NDA-24298 CHAPTER 4 Page 873 Issue 1 AFCH : Assignment of FCCH Number for Loc al Data Memo ry AFCH: Assignment of FCCH Number for Local Data Memory 1. General This command assign s the FCCH car d that provid es the D-channel i n the Fusi on Network l ink.
CHAPTER 4 NDA-24298 Page 874 Issu e 1 AFCH : Assignment of FCCH Number for Loc al Data Memory 4. Data Sheet FCCH NUMBER (FCH N) 1-255 LENS OF FCCH (FCHEN) REMAR KS MG U G L 0 0 0 0 0 0 0 0 0 0 0 0 0 0.
NDA-24298 CHAPTER 4 Page 875 Issue 1 AFPC : Assignment of FCCH Routing Data for Local Data Memory AFPC: Assignment of FCCH Routing Data for Local Data Memory 1. General This command assign s the B-cha nnel and t he D-channel da ta for each F PC. 2. Precautions 1.
CHAPTER 4 NDA-24298 Page 876 Issu e 1 AFPC : Assignment of FCCH Rou ting Data for Local Data Memo ry 3. Data Entry Instructi ons Note 1: “ USE_GA TE ” data is automatically set and this par ameter won ’ t appear on th e MA T display .
NDA-24298 CHAPTER 4 Page 877 Issue 1 AFPC : Assignment of FCCH Routing Data for Local Data Memory 4. Data Sheet Note: “ USE_GA TE ” data is automatically set and this par ameter won ’ t appear on th e MA T display .
CHAPTER 4 NDA-24298 Page 878 Issu e 1 AETH : Assignmen t of External Router Connection Routing Data for LDM AETH: Assignment of Extern al Ro uter Connection Routing Data f or LDM 1. General This command is used to as sig n/del ete routi ng dat a in case the dat a is transfer re d via extern al rou ter.
NDA-24298 CHAPTER 4 Page 879 Issue 1 AETH : Assignment of Ex ternal Router Connection Routing Data for LDM 4. Data Sheet DESTINA TION FPC (FP C) 1-25 3 GA TEW A Y USING FLA G (USE_GA TE) 0/1 FCCH NUMB.
CHAPTER 4 NDA-24298 Page 880 Issu e 1 ACAN : Assignment of CIC Number Between Adjacent Nodes for Local Data Memory A CAN: Assignment of CIC Number Between Adjacent Nodes for Local Data Memory 1. General This command assigns LENS and F usion Circuit Identificat ion Code (Fusi on CIC) numbers on the basis of each Fusion Point Code (FPC).
NDA-24298 CHAPTER 4 Page 881 Issue 1 ACAN : Assignment of CIC Number Between Adjac ent Nodes for Local Data Memory 4. Data Sheet FUSION POINT CODE (FPC) 1-253 FUSION CIC NUMBER (FCI C) 1-4095 CONN ECT.
CHAPTER 4 NDA-24298 Page 882 Issu e 1 AFRT : Assignment of FCCH Controlled Connection Route Data for Local Data Memory AFRT: Assignment of FCCH Controlled Connection Route Data for Local Data Memory 1. General This command assign s the connection rou te con tr oll in g connection tru nks for each FCCH number.
NDA-24298 CHAPTER 4 Page 883 Issue 1 AFRT : Assignment of FCCH Controlled Connection Route Data for Local Data Memory 4. Data Sheet FCCH NUMBER (FCHN) 1-255 CONNECTION R OUTE (C_RT) 1-1023 12345678.
CHAPTER 4 NDA-24298 Page 884 Issu e 1 AGIP : Assignment of Default Gat ew ay IP Address Data for LDM A GIP: Assi gnment of Default Gat ewa y IP Address Data f or LDM 1. General This command is u sed und er FGH co ntrolling to assign/d elete t he IP addres s alloca ted to FGH and IP addr ess of t he Router de dicated to FGH.
NDA-24298 CHAPTER 4 Page 885 Issue 1 AGIP : Assi gnment of Default G at ew ay I P Addr ess Data for LDM (b) W hen “ KIND=IPTRK (CCIS) ” is s elect ed: KI ND O F SELECTI ON ( KI ND) LI NE EQU I PM .
CHAPTER 4 NDA-24298 Page 886 Issu e 1 AGIP : Assignment of Default Gat ew ay IP Address Data for LDM (b) W hen “ KIND=IPTRK (CCIS) ” is s elected ( Contin ued): RTP PKTLOSS JIT_MAX JIT_MIN MNGS JIT_COUNT JIT_FAST TIME_FAST BASE_COUNT RTP Check the “ RTP ” check box for detail assignment.
NDA-24298 CHAPTER 4 Page 887 Issue 1 AGIP : Assi gnment of Default G at ew ay I P Addr ess Data for LDM (c) Wh en “ KIND=IPTRK (FCCS) ” is sel ected : KIND OF SELECTION (KIND) LINE EQUIPMENT NUMBE.
CHAPTER 4 NDA-24298 Page 888 Issu e 1 AGIP : Assignment of Default Gat ew ay IP Address Data for LDM (d) W hen “ KIND=IPTRK (H.323) ” is s elect ed: KIND OF SELECTION (KIND) LINE EQUIPMENT NUMBER (LENS) MG U G IPTRK (H.
NDA-24298 CHAPTER 4 Page 889 Issue 1 AGIP : Assi gnment of Default G at ew ay I P Addr ess Data for LDM 4. Data Sheet (a) Wh en “ KIND=FGH ” is sele cted: LINE EQUIPMENT NUMBER (LENS) KIND OF SELE.
CHAPTER 4 NDA-24298 Page 890 Issu e 1 AGIP : Assignment of Default Gat ew ay IP Address Data for LDM (b) W hen “ KIND=IPTRK (CCIS) ” is s elect ed: LINE EQUIPMENT NUMBER (LENS) KIND OF SELECTION (.
NDA-24298 CHAPTER 4 Page 891 Issue 1 AGIP : Assi gnment of Default G at ew ay I P Addr ess Data for LDM (b) W hen “ KIND=IPTRK (CCIS) ” is s elected ( Contin ued): RTP PKTLOSS JIT_MAX JIT_MIN MNGS.
CHAPTER 4 NDA-24298 Page 892 Issu e 1 AGIP : Assignment of Default Gat ew ay IP Address Data for LDM (c) Wh en “ KIND=IPTRK (FCCS) ” is sel ected : LINE EQUIPMENT NUMBER (LENS) KIND OF SELECTION (.
NDA-24298 CHAPTER 4 Page 893 Issue 1 AGIP : Assi gnment of Default G at ew ay I P Addr ess Data for LDM (d) W hen “ KIND=IPTRK (H.323) ” is s elect ed: LINE EQUIPMENT NUMBER (LENS) KIND OF SELECTI.
CHAPTER 4 NDA-24298 Page 894 Issu e 1 AGIP : Assignment of Default Gat ew ay IP Address Data for LDM (d) W hen “ KIND=IPTRK (H.323) ” is selec ted (C o n tinue d): R TP PKTLOSS J IT_MAX JIT_MIN MN.
NDA-24298 CHAPTER 4 Page 895 Issue 1 AFIP : Assignment of F usion over IP Data fo r LDM AFIP: Assignment o f Fusion over IP Data f or LDM 1. General This command assign s the Route r Access Numbe r for controll ing voi ce cha nnel be tween PBX an d Router.
CHAPTER 4 NDA-24298 Page 896 Issu e 1 AFIP : As signmen t of Fusion ove r IP Data for LDM 4. Data Sheet FCH NUMBER (FCHN) LINE EQUIP MENT NUMBER OF FGH (FGHEN) LIN E EQUIPM ENT NUMBER OF QSIG-PRIME Bch (LENS) ROUTER A CCESS NUMBE R (RT_A CC) Max.
NDA-24298 CHAPTER 4 Page 897 Issue 1 ANSDL : Assignment of Number Sharing Data for LDM ANSDL: Assignment o f Number Sharin g Data for LDM 1. General This command assi gns and del etes Mai n Station and Sub St ation dat a for Numbe r Sharing service and Dual Statio n Call.
CHAPTER 4 NDA-24298 Page 898 Issu e 1 ANSDL : Assignment of Number Sharing Data for LDM 4. Data Sheet (a) Number Sharing Data Assignme nt Sheet MAIN US ER GR OUP NUMBER (M-UGN) MAIN TELEPH ONE NUMBER (M-TEL N) MAX.
NDA-24298 CHAPTER 4 Page 899 Issue 1 ANSDL : Assignment of Number Sharing Data for LDM (a) Number Sharing Data Assignme nt Sheet (Continu ed) SUB TELEPHONE NUMBER MAX.
CHAPTER 4 NDA-24298 Page 900 Issu e 1 ANSDN : Assignment of Numb er Sharing Data for NDM ANSDN: Assignment of Number Sharing D ata f or NDM 1. General This command assi gns and del etes Mai n Station and Sub St ation dat a for Numbe r Sharing service and Dual Statio n Call ser vice.
NDA-24298 CHAPTER 4 Page 901 Issue 1 ANSDN : Assignment of Number Sharing Data for NDM 4. Data Sheet (a) Number Sharing Data Assignme nt Sheet MAIN US ER GR OUP NUMBER (M-UGN) MAIN TELEPH ONE NUMBER (M-TEL N) MAX.
CHAPTER 4 NDA-24298 Page 902 Issu e 1 ANSDN : Assignment of Numb er Sharing Data for NDM (a) Number Sharing Data Assignme nt Sheet (Continu ed) SUB TELEPHONE NUMBER MAX.
NDA-24298 CHAPTER 4 Page 903 Issue 1 AUIDN : Assignment of User ID data for NDM A UIDN: Assi gnment of User ID data f or NDM 1. General This command i s used to as sign t he Use r ID data such a s user n ame a nd password f or the pu rpose of loggi ng i n to PBX by the MAT.
CHAPTER 4 NDA-24298 Page 904 Issu e 1 ASYDN : Assignment of System Data in Ne twork Data Memory ASYDN: Assignment of System Data in Netw ork Data Memory 1.
NDA-24298 CHAPTER 4 Page 905 Issue 1 ASYDN : Assignment of System D ata in Network Data Memory 3. Data Entry Instructi ons DATA BIT 0 0 0 0 1 0 0 0 b0 b1 b2 b3 b4 b5 b6 b7 BIT DATA Hex b7 b6 b5 b4 b3 b2 b1 b0 1 0 0 0 0 1 0 0 0 0 DATA Convert from Binary to Hexadecimal, and enter the Hex.
CHAPTER 4 NDA-24298 Page 906 Issu e 1 ASYDN : Assignment of System Data in Ne twork Data Memory SYSTEM DA T A TYPE (SYS) SYSTEM DA T A INDEX (INDEX) 0 -1535 DA T A (D A T A) 00 – FF (Hex) BIT CORRES.
NDA-24298 CHAPTER 4 Page 907 Issue 1 ASYDN : Assignment of System D ata in Network Data Memory 1 5 b 0 Access Code for C.F .-Busy Line and C.F. -Don ’ t Answer Services 0/1 = Same/Separate Note: If “ 0 ” is assi gned, assi gn either SID: 1 0 or 12 in the ASP A command.
CHAPTER 4 NDA-24298 Page 908 Issu e 1 ASYDN : Assignment of System Data in Ne twork Data Memory 1 16 b 0 1 - digits Station Number 0/1 = Out/In Service b 1 2 - digits Station Number 0/1 = Out/In Servi.
NDA-24298 CHAPTER 4 Page 909 Issue 1 ASYDN : Assignment of System D ata in Network Data Memory Note 1: Index 20 Bit 7 = 0 Station B o r RT + TRK of Calling Party is p rovided as originator of call on SM DR output. Note 2: b 7 = 1 Station A is o utput as the or iginator in both cases .
CHAPTER 4 NDA-24298 Page 910 Issu e 1 ASYDN : Assignment of System Data in Ne twork Data Memory SYSTEM DA T A TYPE (SYS) SYSTEM DA T A INDEX (INDEX) 0 – 1535 DA TA (D A T A) 00 – FF (Hex) BIT CORR.
NDA-24298 CHAPTER 4 Page 911 Issue 1 ASYDN : Assignment of System D ata in Network Data Memory 1 29~3 2 00 Not used 33 0b 0 Not used 0b 1 0b 2 b 3 T eleph one Subject to Total Billing (when b 6 = 1) b 4 b 3 0 0 = T elephone that call ed f irst. 0 1 = T elephone that call ed last.
CHAPTER 4 NDA-24298 Page 912 Issu e 1 ASYDN : Assignment of System Data in Ne twork Data Memory 1 42 b 0 Not used b 1 Not used b 2 Not used b 3 Not used b 4 Not used b 5 Not used b 6 Not used b 7 SST .
NDA-24298 CHAPTER 4 Page 913 Issue 1 ASYDN : Assignment of System D ata in Network Data Memory 1 61-64 0 0 Not used 65 Maximum Number of Routes 1-255 = 0 1FF H ex. 66 00 Not used 67 00 Not used 68 b 0 Operating method for b u sy station service (Call Back, Execu ti ve Right of W ay , etc.
CHAPTER 4 NDA-24298 Page 914 Issu e 1 ASYDN : Assignment of System Data in Ne twork Data Memory 1 70 0b 0 Not used 0b 1 0b 2 0b 3 b 4 One digit dialing instead of SHF (DP TEL only) 0/1 = No t Required.
NDA-24298 CHAPTER 4 Page 915 Issue 1 ASYDN : Assignment of System D ata in Network Data Memory 1 77 0b 0 Not used 0b 1 b 2 MW Refresh 0/1 = R equired/ Not Re quired Note: When message W aiting Lamp is pr ovided, this da ta shoul d be assi gned “ 0.
CHAPTER 4 NDA-24298 Page 916 Issu e 1 ASYDN : Assignment of System Data in Ne twork Data Memory 1 80 00 Not used 90 00 Not used 91 0b 0 Not used 0b 1 b 2 Grades of Sy stem Message that can be reg iste.
NDA-24298 CHAPTER 4 Page 917 Issue 1 ASYDN : Assignment of System D ata in Network Data Memory 1 162-169 Not used 170 b 0 ~ b 3 Not used b 4 T iming Start 0/1 = No t Required/ Required b 5 ~ b 7 Not u.
CHAPTER 4 NDA-24298 Page 918 Issu e 1 ASYDN : Assignment of System Data in Ne twork Data Memory 1 322 00 No t used 511 00 No t used 512 00 No t used 513 00 No t used 514 01 b 0 Local Data Memor y (LDM) us age. Assign data “ 1 ” (the memory bl ock is us ed) for the co rresp onding mem ory block.
NDA-24298 CHAPTER 4 Page 919 Issue 1 ASYDN : Assignment of System D ata in Network Data Memory 1 800 0b 0 ALGNN/ALGSN command tenant UGN (User Group Num- ber) table d ev elo pm ent of Netwo r k Data M.
CHAPTER 4 NDA-24298 Page 920 Issu e 1 ASYDN : Assignment of System Data in Ne twork Data Memory Example: Wh en a call t e rm inates on a D term fr om st ation number 5000/T elephone number 123456789, th e D term display s as f ollo ws depending on the data sett ings: 1 804 0b 0 ~ b 2 Not used.
NDA-24298 CHAPTER 4 Page 921 Issue 1 AFMU : Assignment of FPC, MG and UNIT for Network Data Memor y AFMU: Assignment of FPC, MG and UNIT f or Netw ork Data Memor y 1. General This command alloc ates the Network ID (NID) that i s the uni que loc at ion number in the Fusion Network.
CHAPTER 4 NDA-24298 Page 922 Issu e 1 AFMU : Assignment of FPC, MG and UNIT for Network Data Memory 4. Data Sheet FUSION POINT CODE (FPC) 1-253 MODULE GR OUP NUMBER (MG) 0-7 UNIT NUMBER (U) 0-3 REMARK.
NDA-24298 CHAPTER 4 Page 923 Issue 1 ALRTN : Assignment of Logical Route for Network Data Memory ALRT N: Assignment of Logical Ro ute for Netw ork Data Memor y 1. General This command al lo cates th e Logical Rout e Number that is th e unique number of the exte rn al trunk rou te in the Fusion n etwork.
CHAPTER 4 NDA-24298 Page 924 Issu e 1 ALRTN : Assignment of Logical Route for Network Data Memory 4. Data Sheet LOGICAL RO UTE NUM BER (LGRT) 1-899 FUSI ON POINT CODE (FPC) 1-253 EXTERNAL ROUTE NUMBER.
NDA-24298 CHAPTER 4 Page 925 Issue 1 ANPDN : Assignment of Numbering Plan D ata for Network Data Memory ANPDN: Assignment of Numbering Plan Data for Netw ork Data Memory 1.
CHAPTER 4 NDA-24298 Page 926 Issu e 1 ANPDN : Assignment of Numbering Plan Data for Network Data Memory 4. Data Sheet TENANT NUMBER (TN) 1st DIGIT (1st DC) CONNECTION ST A TUS INDEX (CI) N/H/B NUMBER .
NDA-24298 CHAPTER 4 Page 927 Issue 1 ASP AN : Assignment of Special Access Code for NDM ASP AN: Assignment of Special Access Code f or NDM 1. General This comma nd assigns th e numbering pla n data of the Netw ork Control Node (NCN).
CHAPTER 4 NDA-24298 Page 928 Issu e 1 ASP AN : Assignment of Special Access Code for NDM 3. Data Entry Instructi ons Access code (Max. 6 digits) TENANT NUMBER (TN) ACCESS CODE (ACC) MAX.
NDA-24298 CHAPTER 4 Page 929 Issue 1 ASP AN : Assignment of Special Access Code for NDM Note 1: When Split Call F orwar ding is in service ( the command AS YDN, SYS1, INDEX79, bi t2 = 1), t his acces s code is u sed f or Spl it Cal l F orwar din g s ervic e .
CHAPTER 4 NDA-24298 Page 930 Issu e 1 ASP AN : Assignment of Special Access Code for NDM Note 3: When SRV = SSC (Service code), SID36 (Hotel Service) is assigned For more informat ion about Hotel Ser vice, ref er to AASP command.
NDA-24298 CHAPTER 4 Page 931 Issue 1 ASP AN : Assignment of Special Access Code for NDM Note 4: When SRV = SSC (Se rvice co de), SID 56 (Floor S ervic e) i s ass igned Note 5: When SRV = SSC (Se rvice co de), SID 57 (Spl it Acces s) i s ass igned For more informat ion about Hotel Ser vice, ref er to AASP command.
CHAPTER 4 NDA-24298 Page 932 Issu e 1 ASP AN : Assignment of Special Access Code for NDM Note 1: This data i s valid for Cal l F orwar ding service when Spl it Call F orwar ding is in serv ice. (The command ASYDN, SYS 1, INDEX 79, bi t2=1.) Note 2: This data can be set when CI=N (Normal) .
NDA-24298 CHAPTER 4 Page 933 Issue 1 ASP AN : Assignment of Special Access Code for NDM LOGICAL ROUTE NUMBER (LGRT) When SRV=OGC (Outgoing call) is assigned Assign a dummy route number.
CHAPTER 4 NDA-24298 Page 934 Issu e 1 ASP AN : Assignment of Special Access Code for NDM LOGICAL ROUTE NUMBER (LGRT) 1-899 When SRV=PAGA (Paging Answer) is assigned When SRV=PAGC (Paging Cancel) is assigned LGRT Enter the Logical Route Number of Paging Trunk.
NDA-24298 CHAPTER 4 Page 935 Issue 1 ASP AN : Assignment of Special Access Code for NDM 4. Data Sheet (a) Service cod e (SR V = SSC) Note 1: The par amete r may var y dependin g on the servic e.
CHAPTER 4 NDA-24298 Page 936 Issu e 1 ASP AN : Assignment of Special Access Code for NDM (a) Service cod e (SR V = SSC) (Conti nued) Note 1: The parameter may va ry depending on the service. Note 2: The available number s of necessary dig its vary depend ing on the para meter SID.
NDA-24298 CHAPTER 4 Page 937 Issue 1 ASP AN : Assignment of Special Access Code for NDM (a) Service Code (SR V = SSC) (Continued) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXI MUM 6 DIG ITS CONNECTION S.
CHAPTER 4 NDA-24298 Page 938 Issu e 1 ASP AN : Assignment of Special Access Code for NDM (a) Service Code (SR V = SSC) (Continued) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXI MUM 6 DIG ITS CONNECTION .
NDA-24298 CHAPTER 4 Page 939 Issue 1 ASP AN : Assignment of Special Access Code for NDM (a) Service Code (SR V = SSC) (Continued) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXI MUM 6 DIG ITS CONNECTION S.
CHAPTER 4 NDA-24298 Page 940 Issu e 1 ASP AN : Assignment of Special Access Code for NDM (a) Service cod e (SR V = SSC) (Conti nued) Note 1: The parameter may va ry depending on the service. Note 2: The avail able n umbers of neces sary digi ts var y depending on t he par ameter SID.
NDA-24298 CHAPTER 4 Page 941 Issue 1 ASP AN : Assignment of Special Access Code for NDM (a) Service Code (SR V = SSC) (Continued) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXI MUM 6 DIG ITS CONNECTION ST A T US INDEX (CI ) N/H /B KIND OF SER VIC E (SR V) SER VIC E INDEX (SID ) SER VICE INDEX NUMBER (No.
CHAPTER 4 NDA-24298 Page 942 Issu e 1 ASP AN : Assignment of Special Access Code for NDM (a) Service Code (SR V = SSC) (Continued) Note: Split Acce ss (Same Number Access ) (SID = 57) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXIMUM 6 DIGITS CONNECTION ST A TUS INDEX (CI) N/H/B KIND OF SER VICE (SR V) SER VICE INDEX (SID) ASSIGN NUMBER (No.
NDA-24298 CHAPTER 4 Page 943 Issue 1 ASP AN : Assignment of Special Access Code for NDM (b) Service code Appendi x (SR V = SSCA) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXI MUM 6 DIGITS CONNECTION ST .
CHAPTER 4 NDA-24298 Page 944 Issu e 1 ASP AN : Assignment of Special Access Code for NDM (b) Service code Appendi x (SR V = SSCA) (Conti nued) Note: This data i s valid for Cal l F orwar ding service when Spl it Call F orwar ding is in serv ice. (The command ASYDN, SYS 1, INDEX 79, bi t2 = 1.
NDA-24298 CHAPTER 4 Page 945 Issue 1 ASP AN : Assignment of Special Access Code for NDM (c) Outgoing Call (SR V = OGC) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXI MUM 6 DIGITS CONNECTION ST A TUS IND .
CHAPTER 4 NDA-24298 Page 946 Issu e 1 ASP AN : Assignment of Special Access Code for NDM (d) Outgoing Call W ith Route Adv ance (SR V = OGCA) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXI MUM 6 DIGITS C.
NDA-24298 CHAPTER 4 Page 947 Issue 1 ASP AN : Assignment of Special Access Code for NDM (e) Least Cost Routing (SR V = LCR) TENANT NUM BER (TN) A CCESS CODE (A CC) MAXI MUM 6 DIGITS CONNECTION ST A TU.
CHAPTER 4 NDA-24298 Page 948 Issu e 1 ASP AN : Assignment of Special Access Code for NDM (f) Registe r S e nder LCR (S R V = LCR S) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXI MUM 6 DIGITS CONNECTION .
NDA-24298 CHAPTER 4 Page 949 Issue 1 ASP AN : Assignment of Special Access Code for NDM (g) Announcement Servi ce (SR V = ANNC) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXIMUM 6 DIGITS CONNECTION ST A .
CHAPTER 4 NDA-24298 Page 950 Issu e 1 ASP AN : Assignment of Special Access Code for NDM (h) Announcement Ser vi ce- Multip le An noun cement (SR V = ANNCM) TENANT NUMBER (TN) A CCESS CODE (A CC) MAX.
NDA-24298 CHAPTER 4 Page 951 Issue 1 ASP AN : Assignment of Special Access Code for NDM (i) P aging Answer (S R V = P A GA) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXIMUM 6 DIGITS CONNECTION ST A TUS .
CHAPTER 4 NDA-24298 Page 952 Issu e 1 ASP AN : Assignment of Special Access Code for NDM (j) P agi ng Cance l (SR V = P A GC) TENANT NUMBER (TN) A CCESS CODE (A CC) MAXIMUM 6 DIGITS CONNECTION ST A TU.
NDA-24298 CHAPTER 4 Page 953 Issue 1 ASP AN : Assignment of Special Access Code for NDM (k) T elephone Number (S RV = TELN) TENANT NUM BER (TN) A CCESS CODE (A CC) MAXI MUM 6 DIGITS CON NEC TI ON ST A.
CHAPTER 4 NDA-24298 Page 954 Issu e 1 ALGNN : Assignment of T elephone Number Data for NDM ALGNN: Assignment of T elepho ne Number Data f or NDM 1. General This comm and assigns the indivi dua l atten dan t ident ific atio n number f or F usi on ser vice.
NDA-24298 CHAPTER 4 Page 955 Issue 1 ALGNN : Assignmen t of T elephone Number Data for NDM 4. Data Sheet USER GROUP NUMBER (UGN) TELEPHONE S T ATION NUMBER (TELN) MAX.
CHAPTER 4 NDA-24298 Page 956 Issu e 1 ALGSN : Assignment of T elephone Station Data for NDM ALGSN: Assignm en t of T elephone Station Data f or N DM 1. General This command a ssigns th e relate d data o f the Tele phone Number (T ELN) corresp onding to t he physica l stati on.
NDA-24298 CHAPTER 4 Page 957 Issue 1 ALGSN : Assignment of T elephone Stat ion Data for NDM 3. Data Entry Instructi ons When assigning TYPE = 1 (LENS is used to spe cif y the T elephone number) When assigning TYPE = 2 (STN is used to specify the T elephone number) TYPE 1/2 USER GR OUP NUMBER (UGN) TELEPHONE NUMBER (TELN) MAX.
CHAPTER 4 NDA-24298 Page 958 Issu e 1 ALGSN : Assignment of T elephone Station Data for NDM 4. Data Sheet (a) LE NS is us ed to sp ecify the T elep hone numb er (T YPE = 1) TYPE USER GROUP NUMB ER (U GN) TELEPHONE NUMBER (TELN) MAX.
NDA-24298 CHAPTER 4 Page 959 Issue 1 ALGSN : Assignment of T elephone Stat ion Data for NDM (b) S TN is use d to s peci fy th e T ele phone num ber ( TYPE = 2) TYPE USER GR OUP NUMBER (UGN) TELEPHONE NUMBER (TELN) MAX.
CHAPTER 4 NDA-24298 Page 960 Issu e 1 A TSTN : Assignment of T ele phone Number and Station Numbe r for NDM A T STN: Assig nment of T e l ephone Number and Station Number for NDM 1. General This comman d assigns both Telephone Number (TELN) and Physi cal Stat ion Number.
NDA-24298 CHAPTER 4 Page 961 Issue 1 A TSTN : Assignment of T elephone Number a nd Station Number for NDM 3. Data Entry Instructi ons 1 = DP (10pps) 3 = DP/PB 5-11 = Not used 13 = Data Terminal via D .
CHAPTER 4 NDA-24298 Page 962 Issu e 1 A TSTN : Assignment of T ele phone Number and Station Numbe r for NDM 4. Data Sheet USER GR OUP NUMBER (UGN ) TELEPHONE NUMBER (TELN) MAX.
NDA-24298 CHAPTER 4 Page 963 Issue 1 A TSTN : Assignment of T elephone Number a nd Station Number for NDM LINE EQUIPMENT NUMBER (LENS) TELEPHONE EQUIPMENT CLASS (TE C) 1-31 RO UT E RESTRICTION CLASS (.
CHAPTER 4 NDA-24298 Page 964 Issu e 1 APLNN : Assignment of Physical LENS Number for NDM APLNN: Assignment of Ph ysical LENS Number f or NDM 1. General This comman d changes the exi sting stat ion data all ocated to eac h TELN (Telephone number ) such as FPC, LENS, Tenant Number, and Station.
NDA-24298 CHAPTER 4 Page 965 Issue 1 APLNN : Assignment of Physical LENS Number for NDM 3. Data Entry Instructi ons (a) Wh en “ TYPE=LENS ” is s elected (b) W hen “ TYPE=STN ” is se lected USE.
CHAPTER 4 NDA-24298 Page 966 Issu e 1 APLNN : Assignment of Physical LENS Number for NDM 4. Data Sheet (a) Wh en “ TYPE=LENS ” is s elected USER GR OUP NUMB ER (UG N) TELEPHONE NUMBE R (TELN) NO W.
NDA-24298 CHAPTER 4 Page 967 Issue 1 APLNN : Assignment of Physical LENS Number for NDM INPUT TYPE (TYPE) NEW FUSION POINT COD E (NEW FPC) 1-25 3 NEW LIN E EQU IPMENT NUMBER (NEW LENS) REMARKS.
CHAPTER 4 NDA-24298 Page 968 Issu e 1 APLNN : Assignment of Physical LENS Number for NDM (b) W hen “ TYPE=STN ” is se lected USER GR OUP NUMB ER (UG N) TELEPHONE NUMBE R (TELN) NO W FUSION POINT C.
NDA-24298 CHAPTER 4 Page 969 Issue 1 APLNN : Assignment of Physical LENS Number for NDM INPUT TYPE (TYPE) NEW FUSION POINT CODE (NEW FPC) 1-253 NEW TENANT NUMB ER (NE W TN) NEW ST A TION NUMBE R (NEW .
CHAPTER 4 NDA-24298 Page 970 Issu e 1 A TDF : Assig nmen t of Time Differ en ce Data A TDF: A ssignment of Time Diff erence D ata 1. General This comman d is requi red when there is time di ffer ence with in the Fusi on link.
NDA-24298 CHAPTER 4 Page 971 Issue 1 A TDF : Assig n m en t of Time Difference D at a 4. Data Sheet FUSION POINT CODE (FPC) 1-253 (SIGN) 1/2 HOUR (HOUR ) 0-12 MINUTE (MINUTE) 0-59 REMAR KS.
CHAPTER 4 NDA-24298 Page 972 Issu e 1 AMWF : Assignment of Message W aiting Remote FPC for LDM AM W F : A ss ig n m e nt o f Messa ge W aiting Remot e FPC for LDM 1. General This comma nd assi gns th e Fusi on Poi nt Code (FPC) of Remo te nod es in the F usion Netw ork fo r Messa ge Waiting c ontrol.
NDA-24298 CHAPTER 4 Page 973 Issue 1 AMWF : Assignment of Messag e Wa iting Rem ote FPC for LDM 4. Data Sheet REMOT E FPC ASSIGNMENT NUMBER (CNT) 0-252 REMO TE FPC FOR MESSA GE W AITING FUNCTION CONT .
CHAPTER 4 NDA-24298 Page 974 Issu e 1 AFRFL : Assignment of Flexible Route Data for Fu sion for LDM AFRFL: Assignm en t of Flexible Route Data f or Fusion f or LDM 1. General This co mmand assigns the alternat ive route dat a via C.O. or tie line in ca se all the conne ction tru nks are busy or FCCS link f ailure ( Layer 2 down) has occur red.
NDA-24298 CHAPTER 4 Page 975 Issue 1 AFRFL : Assignment of Flexible Route Data for Fusion for LDM 4. Data Sheet TN FP C (1-2 53) AC C MAX. 24 digits.
CHAPTER 4 NDA-24298 Page 976 Issu e 1 AFUGN : Assignment of EX-FCCS Fusion Group Data for NDM AFUGN: Assignment of EX-FCCS Fusion Group Data f or ND M 1. General This co mman d is us ed to assign and read t he da ta relate d to Fusion Gr oup Number i n mult ip le FCCS network s connecte d via CC IS lin k.
NDA-24298 CHAPTER 4 Page 977 Issue 1 AFUGN : Assignment of EX-FCCS Fusion Group Data for NDM 4. Data Sheet SELF FUSION GR OUP NUMBER (SELF_FUG) 0-4 CENTER FUSIO N GR OUP (CEN TER) CONN EC TI ON FUSION.
CHAPTER 4 NDA-24298 Page 978 Issu e 1 AEXFN : Assignment of EX-FCCS CCH Selection Data for NDM AEXFN: Assignment of EX-FCCS CCH Selection Data f or NDM 1.
NDA-24298 CHAPTER 4 Page 979 Issue 1 AEXFN : Assignment of EX-FCCS CCH Selection Data for NDM 4. Data Sheet FUSION GR OUP NUMBER (FUG) 1-4 FUSION POI NT CODE (FPC) 1-253 POINT CODE (PC) 1-16383 REMARK.
CHAPTER 4 NDA-24298 Page 980 Issu e 1 AEADN : Assignment of EX-FCCS ADC Data for NDM AEADN: Assignment of EX-FCCS ADC Data f or NDM 1. General This command i s used to as sign, dele te and rea d Abbreviat ed Digit Code (ADC) for conn ected Fusi on Group (FUG) withi n multiple FCCS n etworks via CCIS link.
NDA-24298 CHAPTER 4 Page 981 Issue 1 AEADN : Assignme nt of EX-FCCS ADC Data for NDM 4. Data Sheet FUSION GROUP NUM BER (FUG) 1-4 TENANT NUM BER (TN) ABBREVIA T E D DIGIT CODE (ADC) MAX.
CHAPTER 4 NDA-24298 Page 982 Issu e 1 AELGN : Allocation of EX-FCCS Telephone Number Data for NDM AELGN: Allocation of EX -FCCS Telephone Number Data for NDM 1. General This command is used to ass ign, delet e and rea d Telephone Number dat a in multipl e FCCS network s connected via CCIS li nk.
NDA-24298 CHAPTER 4 Page 983 Issue 1 AELGN : Allocation of EX-FCCS T ele phone Number Data for NDM 3. Data Entry Instructi ons Note: P arameters ma rked * ar e r equir e d only whe n NEAX2400 IPX is sele cted in “ SYS TEM ” parame ter . USER GROUP NUMBER (UGN) TELEPHONE NUMBER (TELN) MAX.
CHAPTER 4 NDA-24298 Page 984 Issu e 1 AELGN : Allocation of EX-FCCS Telephone Number Data for NDM 4. Data Sheet USER GROUP NUMBER (UGN) TELEPHONE NUMBER (TELN) MAX.
NDA-24298 CHAPTER 4 Page 985 Issue 1 AELGN : Allocation of EX-FCCS T ele phone Number Data for NDM FUSI ON P OINT CODE (FPC) 1-253 LINE EQUIPMENT NUMBER (LENS) TENANT NUMBER (TN) ST A TION NUMBER (STN) MAX.
CHAPTER 4 NDA-24298 Page 986 Issu e 1 This page is for yo ur no te s..
Ein wichtiger Punkt beim Kauf des Geräts NEC NDA-24298 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie NEC NDA-24298 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für NEC NDA-24298 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von NEC NDA-24298 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über NEC NDA-24298 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon NEC NDA-24298 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von NEC NDA-24298 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit NEC NDA-24298. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei NEC NDA-24298 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
