Benutzeranleitung / Produktwartung MultiSync P553 DST des Produzenten NEC
Zur Seite of 57
3M Touch Systems, Inc. Proprietary Information – 25695K 3M ™ MicroTouch ™ Software MT 7 User Guide For Microsoft® Windows®, Windows® CE, and Linux® Operating Systems Read and understand all safety information contained in this document before using this product.
2 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K The information in this document is subject to change without notice.
3M™ MicroTouch™ Software MT 7 User Guide 3 3M Touch Systems, Inc. Proprietary Information – 25695K Content s Introduction About This Manual ..................................................................................................... 5 Sensor Care and Cleaning .
4 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K Chapter 5 MT 7 for Linux® Overview System Requirements ......................................................................................
3M™ MicroTouch™ Software MT 7 User Guide 5 3M Touch Systems, Inc. Proprietary Information – 25695K Introduction About This Manual This manual describes how to: • Install 3M™ MicroTouch™ Software MT 7 for your touch system and specific operating system.
6 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K • It is important to avoid using any caustic chemicals on the sensor.
3M™ MicroTouch™ Software MT 7 User Guide 7 3M Touch Systems, Inc. Proprietary Information – 25695K CHAPTER 1 Inst alling MT 7 Sof tware 3M™ MicroTouch™ Software MT 7 allows users to select, launch, and drag objects using the sensor.
8 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K • Whether the touch action occurs when you touch the sensor or when you lift your finger (or stylus) off the sensor. • Whether you hear a sound when you touch the sensor.
3M™ MicroTouch™ Software MT 7 User Guide 9 3M Touch Systems, Inc. Proprietary Information – 25695K To install MT 7 software: 1. Make sure you have completed the appr opriate hardware connections. Serial controllers should be connected before you begin.
10 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K • If this is not a new installation, the cho sen option reflects the driver you currently use. Note that some systems may not show a touch digitizer driver option.
3M™ MicroTouch™ Software MT 7 User Guide 11 3M Touch Systems, Inc. Proprietary Information – 25695K Utilities and T ools The Blank Cursor option enables you to hide the cursor. By selecting this, MT 7 Software installs a blank cursor on your system.
12 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K Note that the silent installation fails if th e installer reacts differently than when it was recorded.
3M™ MicroTouch™ Software MT 7 User Guide 13 3M Touch Systems, Inc. Proprietary Information – 25695K CHAPTER 2 MT 7 Sof tware Control Panel Overview The MT 7 software control panel consists of tabs that allow you to determine the best settings for your touch system configuration.
14 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K Main Tab This tab covers sensor calibration as well as basic support information. Calibration The calibration process aligns the sensor with the underlying video.
3M™ MicroTouch™ Software MT 7 User Guide 15 3M Touch Systems, Inc. Proprietary Information – 25695K Note: If you are using a stylus (pen) and you are in Pen/Finger mode, a dialog will ask whether you wish to calibrate using Pen or Finger.
16 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K • Touch each corner and along the edges of th e sensor. Verify that the cursor reaches the full image area of the sensor. Be sure you can touch and activate all icons and menus across the entire sensor.
3M™ MicroTouch™ Software MT 7 User Guide 17 3M Touch Systems, Inc. Proprietary Information – 25695K Sensor S tatus Sensor Status refers to whether or not the sensor has been found and is operational. Some of the possible messages include: • OK – Sensor found and operational.
18 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K The Touch Settings tab enables you to customize the response of your sensor.
3M™ MicroTouch™ Software MT 7 User Guide 19 3M Touch Systems, Inc. Proprietary Information – 25695K Right-Click T ool (not available on Linux®) This option places an icon on the desktop (always on top of your application) that allows you to select which mouse button to activate on touch.
20 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K Edge Adjustment Tab Once you calibrate the sensor, the cursor shoul d be located directly beneath your finger when you touch the sensor. However, this may make it difficult to touch items at the very edges of the sensor.
3M™ MicroTouch™ Software MT 7 User Guide 21 3M Touch Systems, Inc. Proprietary Information – 25695K Determine if the area you have defined is su fficient for your needs. Can you touch into the corners and along the edges of the sensor? Click Escape, End Test, or Return to go back to the Edge Adjustment tab.
22 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K Tools Tab The Tools tab enables you to perform a variety of diagnostics to optimize the performance of your sensor. This tab is al so the gateway to advanced touch options.
3M™ MicroTouch™ Software MT 7 User Guide 23 3M Touch Systems, Inc. Proprietary Information – 25695K Draw T est Note: You must be in Draw mode for this to work properly. The Draw program lets you test the operation of the sensor and pen by checking the accuracy and speed with which the system responds to your touch.
24 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K If after restoring controller factory defaults, you lose touch, you will need to reboot in order to restore touch. Note: You must perform a calibration af ter restoring controller defaults.
3M™ MicroTouch™ Software MT 7 User Guide 25 3M Touch Systems, Inc. Proprietary Information – 25695K Controller Tab The Controller tab contains different choices depending on the type of touch controller(s) you have attached to your system and which options you selected from the Advanced Options from the Tools tab.
26 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K Linearization With certain controllers, you can perform a linear ization to fine-tune your touch sensor. It should be performed only at the direction of 3M Touch Systems, Inc.
3M™ MicroTouch™ Software MT 7 User Guide 27 3M Touch Systems, Inc. Proprietary Information – 25695K To test the accuracy of the linearization process, use the Draw Test program (found on the Tools Tab) to draw some lines on the screen. Check that they are smooth, straight, and thin.
28 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K If you are using the pen and you lift the pen from the sensor, the system does not recognize finger touches until after a system-defined time delay.
3M™ MicroTouch™ Software MT 7 User Guide 29 3M Touch Systems, Inc. Proprietary Information – 25695K Adjust the frequency until your touch test produces acceptable results. A good test is to go to the Draw program and hold your finger steady on the sensor.
.
3M™ MicroTouch™ Software MT 7 User Guide 31 3M Touch Systems, Inc. Proprietary Information – 25695K CHAPTER 3 Windows® CE Overview MT 7 Software, a member of the MicroTouch™ Software Suite, provides unified driver support for MicroTouch touch technologies over a wide range of operating systems.
32 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K Welcome The first screen you will see is one welcoming you to the Setup wizard. To continue click Next. License Agreement The next screen you will be shown is the License agreement.
3M™ MicroTouch™ Software MT 7 User Guide 33 3M Touch Systems, Inc. Proprietary Information – 25695K Select Installation Folder In the Select Installation Folder screen you are first given the option to choose your installation folder. The default option is the CWINCE600.
34 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K Confirm Installation The Confirm Installation screen notifies you that the setup is ready to install.
3M™ MicroTouch™ Software MT 7 User Guide 35 3M Touch Systems, Inc. Proprietary Information – 25695K The Installer produces a catalog file, TwTouch.pbcxml that reflects the components that are installed and could be included in a project. Instructions for Platform Builder for Microsoft Windows® CE 6.
36 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K Note: If you don’t see MT 7 catalog items, you either did not install MT 7 into Windows CE 6.0 root directory or you need to reopen the current project.
3M™ MicroTouch™ Software MT 7 User Guide 37 3M Touch Systems, Inc. Proprietary Information – 25695K Slow Draw Anomalies Using Draw mode can be slow on certain Windows® CE machines. For exam ple, drawing a curve inside a draw application may produce ragged lines and the cursor may lag behind.
.
3M™ MicroTouch™ Software MT 7 User Guide 39 3M Touch Systems, Inc. Proprietary Information – 25695K CHAPTER 4 Windows® XP Embedded Overview MT 7 Software, a member of the MicroTouch™ Software Suite, provides unified driver support for MicroTouch touch technologies over a wide range of operating systems.
40 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K Whether you are using a serial or USB controller, the MT7 touch driver requires USB support. You must include the XPe USB support component in your target device.
3M™ MicroTouch™ Software MT 7 User Guide 41 3M Touch Systems, Inc. Proprietary Information – 25695K CHAPTER 5 MT 7 for Linux® Overview MT 7 for Linux® provides unified driver support for the Linux® operating system for kernel 2.6. This product includes a user-sp ace sensor driver, an X input module, and a calibration tool.
42 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K Installation Instructions The MT 7 for Linux® software is proprietary and not open source.
3M™ MicroTouch™ Software MT 7 User Guide 43 3M Touch Systems, Inc. Proprietary Information – 25695K Normal Inst allation Copy the tar.gz file into the directory where you want the package to reside, such as /etc. Issue the command 'tar xzf twscreen.
44 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K LibDir The MT 7 for Linux® software uses several shared objects. The Install script links these into /usr/lib. If your system's libraries are elsew here, change this variable to point to the correct path.
3M™ MicroTouch™ Software MT 7 User Guide 45 3M Touch Systems, Inc. Proprietary Information – 25695K Some distributions require a suffix for these scripts. If needed, change the XinitSuffix value to the needed suffix. For example, if your distribution requires these scripts to have a '.
46 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K It should start as before. Then copy the file /var/log/xorg.0.log to another file. Edit this file and look for a section where the X server say s it is using a built-in configuration.
3M™ MicroTouch™ Software MT 7 User Guide 47 3M Touch Systems, Inc. Proprietary Information – 25695K 3. The TWDrvStartup script must complete before running the X server. The TWDrvStartup script modifies the X server configuration file (either xorg.
48 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K To override this behavior, set the symbol MT7FontSanSerif to a proper X Windows font name. To find a suitable font, use the xlsfonts comm and or other suitable utility that lists the available fonts.
3M™ MicroTouch™ Software MT 7 User Guide 49 3M Touch Systems, Inc. Proprietary Information – 25695K APPENDIX A Multiple Monitor Setup (Windows® Only) Overview The Multiple Monitor Manager enables you to set up multiple monitors with touch screens.
50 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K 3. Once you have linked your touch screen to monitors, you may choose to Save your changes, Cancel your changes or simply Start Over. In the screen below, none of the touch screens or monitors has been linked.
3M™ MicroTouch™ Software MT 7 User Guide 51 3M Touch Systems, Inc. Proprietary Information – 25695K In the following screen, there are 5 touch screen s and 9 monitors that can be linked.
.
3M™ MicroTouch™ Software MT 7 User Guide 53 3M Touch Systems, Inc. Proprietary Information – 25695K APPENDIX B T roubleshooting the T ouch System Overview This chapter provides tips and strategies for problems you may encounter with the touch system either during installation or normal use.
54 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K Important Note: Editing registry values may alter the performance of your system or render it inoperable. Create a backup of your Windows® system registry file before making any changes to these files.
3M™ MicroTouch™ Software MT 7 User Guide 55 3M Touch Systems, Inc. Proprietary Information – 25695K Note: Changing this setting will affect the double-click setting of the mouse. Drawing Lines Are Not Straight and Smooth Contact 3M Touch Systems, Inc.
56 3M™ MicroTouch™ Software MT 7 User Guide 3M Touch Systems, Inc. Proprietary Information – 25695K Touch Driver Did Not Load Check Windows® device manager under mice and pointing devices to se.
3M™ MicroTouch™ Software MT 7 User Guide 57 3M Touch Systems, Inc. Proprietary Information – 25695K If this does not work (MT 7 still won’t insta ll) then the Registry needs editing. Start REGEDIT and browse to HKEY_LOCAL_MACHINESYSTEMCurrentCont rolSetServicesMTSTCH and delete the MTSTCH key.
Ein wichtiger Punkt beim Kauf des Geräts NEC MultiSync P553 DST (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie NEC MultiSync P553 DST noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für NEC MultiSync P553 DST - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von NEC MultiSync P553 DST reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über NEC MultiSync P553 DST erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon NEC MultiSync P553 DST besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von NEC MultiSync P553 DST verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit NEC MultiSync P553 DST. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei NEC MultiSync P553 DST gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
