Benutzeranleitung / Produktwartung GB114BC des Produzenten Multiquip
Zur Seite of 66
OPERA TION & P ARTS MANUAL Re vision #3 (03/22/06) THIS MANU AL MUST A CCOMP ANY THE EQUIPMENT A T ALL TIMES. GloBug MODEL GB114BC LIGHTING SYSTEM (FOR USE WITH MQ SERIES GENERA TORS).
P A GE 2 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06).
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 3 HERE'S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING MUL TIQUIP CORPORA TE OFFICE 18910 Wilmington A ve . 800-421-1244 Carson, CA 90746 FAX: 310-537-3927 Email: mq@multiquip .
P A GE 4 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) T ABLE OF CONTENTS Specification and part number are subject to change without notice . NO TE MQ GLOBUG LIGHTING MQ GLOBUG LIGHTING MQ GLOBUG LIGHTING MQ GLOBUG LIGHTING MQ GLOBUG LIGHTING SYSTEM SYSTEM SYSTEM SYSTEM SYSTEM Here's How T o Get Help .
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 5 When ordering parts, please supply the following information: ❒ ❒ ❒ ❒ ❒ Dealer account number ❒ .
P A GE 6 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) Safety precautions should be followed at all times when operating this equipment. F ailure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others.
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 7 Other impor tant messages are pro vided throughout this manual to help prevent damage to your lighting system, other proper ty , or the surrounding en vironment.
P A GE 8 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOB UG LIGHTING SYSTEM — RULES FOR SAFE OPERA TION ■ AL W A YS refuel in a well-ventilated area, a w a y from spar ks and open flames. ■ AL W A YS use extreme caution when w o rking with flammable liquids.
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 9 ■ AL W A YS make sure that the GloBug is secure on fir m le v el ground so that it cannot slide or shift around, endangering workers. Also keep the immediate area free of bystanders.
P A GE 10 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOB UG LIGHTING SYSTEM — RULES FOR SAFE OPERA TION The D ANGER items listed below and on the ne xt page are considered High D ANGER areas and should be adhered to .
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 11 GLOB UG LIGHTING SYSTEM — RULES FOR SAFE OPERA TION Emergencies ■ AL W A Y S know the location of the nearest fire extinguisher . AL W A YS keep electrical cords in good condition.
P A GE 12 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) Machine Safety Decals The GloBug is equipped with a number of saf ety decals, Figures 1A through 1C. These decals are provided for operator saf ety an d maintenance inf or mation.
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 13 GLOB UG LIGHTING SYSTEM — OPERA TION AND SAFETY DECALS Figure 1B.
P A GE 14 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOB UG LIGHTING SYSTEM — OPERA TION AND SAFETY DECALS Figure 1C.
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 15 GLOBUG LIGHTING SYSTEM — SPECIFICA TIONS s n o i t a c i f i c e p S . 1 e l b a T g u B o l G l e d o MC B 4 1 1 B G e g a t l o V t u p n IC A V 0 2 1 y c n e u q e r Fe s a h P - e l g n i S z H 0 6 t n e r r u C .
P A GE 16 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOBUG LIGHTING SYSTEM — DIMENSIONS Figure 2. Dimensions S N O I S N E M I D . 2 E L B A T e c n e r e f e R r e t t e L n o i t p i r c s e D) . m m ( .
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 17 GLOBUG LIGHTING SYSTEM — FLOODLIGHT FOO TCANDLE PLO T Figure 3.
P A GE 18 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOBUG LIGHTING SYSTEM — FLOODLIGHT FOO TCANDLE PLO T Figure 4.
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 19 GLOBUG LIGHTING SYSTEM — FLOODLIGHT FOO TCANDLE PLO T Figure 5.
P A GE 20 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOBUG LIGHTING SYSTEM — GENERAL INFORMA TION The Multiquip GloBug Lighting System is a general purpose floodlight tower intended for emergency and remote lighting conditions .
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 21 NO TE P A GE.
P A GE 22 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOBUG LIGHTING SYSTEM — COMPONENTS Figure 6. Major Components.
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 23 GLOBUG LIGHTING SYSTEM — COMPONENTS Figure 6 shows the location of the controls and components f or the GloBug Lighting System. The functions of each control is described below: 1.
P A GE 24 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOBUG LIGHTING SYSTEM — PRE-SETUP CA UTION - Read Manual Please read this entire manual carefully before attempting to operate the GloBug. F ailure to read this manual could cause damage to the GloBug and serious injury to the operator .
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 25 GLOBUG LIGHTING SYSTEM — PRE-SETUP 5. T o position the balloon, simply loosen the adjustment lever by turning it counter- clockwise and either push down or up on the le v er .
P A GE 26 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) D ANGER - HIGH V OL T A GE PO WER LINES When raising mast, AL W A YS be on the lookout for overhead obstructions such as high v oltage power lines .
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 27 GLOBUG LIGHTING SYSTEM — SHUTDO WN Figure 18. Hot Lamp Surface 4. Using the mechanical winch (Figure 6, item 2), fully lo wer the mast. T ur n winch handle counter-clockwise to lower mast.
P A GE 28 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOBUG LIGHTING SYSTEM — MAINTENANCE Removing the Lamp/Balloon Assembly 1 . Place the lamp/ballon assembly in the STO W position. 2 . With a 5 mm allen wrench, loosen the set screw (Figure 23) that secures the lamp to the mast adapter stand.
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 29 Installing a New Lamp 1. When installing a new lamp (Figure 27) use only MQ recommended type lamp . See par ts section of this manual. F ailure to use correct type lamp could adv ersely affect lighting capability and may cause damage to the equipment.
P A GE 30 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOBUG LIGHTING SYSTEM — MAINTENANCE Check Cab le W ear The wire rope (cable) that raises and extends the mast is a very important part of the GloBug lighting system.
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 31 Pulling-Out the Mast Sections 1. Grab hold of the main mast (Figure 34) and begin pulling the mast sections upwards . Star t with second mast, then the third mast and finally the f our th.
P A GE 32 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) Installation of Winch Cable 1. Route (pass) a new winch cable through the main mast pulley (Figure 37). 2. Route the winch cable around the upper pulley of the third mast section from back to front.
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 33 Ballast Box Removal Dangerous conditions exists inside the ballast compartment. Please use extreme caution when performing maintenance on the ballast box. NEVER touch the ballast or ballast cover while the lamp is on.
P A GE 34 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) Filter Replacement GLOBUG LIGHTING SYSTEM — MAINTENANCE 1. Remove the balloon as described in the "Removing the Lamp/Balloon" section. 2. Disconnect the lamp power cable as shown in Figure 23.
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 35 GLOBUG LIGHTING SYSTEM — MAINTENANCE (WIRING DIA GRAM) Figure 45.
P A GE 36 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOBUG LIGHTING SYSTEM — MAINTENANCE.
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 37 GLOBUG LIGHTING SYSTEM — MAINTENANCE For a prolonged life cycle an extended quality follow the recommended GloBug service guidelines as referenced in T ab le 3.
P A GE 38 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOBUG LIGHTING SYSTEM — TR OUBLESHOO TING (LAMPS) Practically all breakdowns can be prevented by pro.
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 39 GLOBUG LIGHTING SYSTEM — TR OUBLESHOO TING (MAST) Practically all breakdowns can be prevented by proper han.
P A GE 40 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) EXPLANA TION OF CODE IN REMARKS COLUMN How to read the marks and remarks used in this par ts book.
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 41 GLOBUG LIGHTING SYSTEM — SP ARE P A RTS GloBug LIGHTING SYSTEM 1 T O 3 UNITS Qty . P/N Description 2 ......... E000009800 .... BULB 2 ......... A300033800 ...
P A GE 42 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOB UG LIGHTING SYSTEM — NAMEPLA TE AND DECALS.
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 43 NAMEPLA TE AND DECALS. NO . P AR T NO . P AR T NAME QTY . REMARKS 1 DCL413 DECAL; CA UTION CO VER INFORMA TION 1 2 DCL404 DE C A L ; CA UTION LAMP CO VER BUZZER 1 3 DCL412 DE C A L ; W ARNING, LIFT HANGER 1 4 DCL416 DE C A L ; D ANGER, ELECTRICAL SHOCK HAZ.
P A GE 44 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOB UG LIGHTING SYSTEM — T -HANDLE ASSY . T -HANDLE ASSY .
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 45 GLOBUG LIGHTING SYSTEM — T -HANDLE ASSY . T -HANDLE ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 * 1102700130 HANDLE GRIP 2 2 A200016500 HANDLE GRIP ..
P A GE 46 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOBUG LIGHTING SYSTEM — STEERING ASSY . STEERING ASSY .
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 47 STEERING ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 0010510025 B OL T AND W ASHER (M10X25) 4 2 A400033400 CA TCHER (OUTRIGGER) 2 3 A300029800 FRONT SHAFT (R) 1 4 0040720000 SNAP RING (20) 8 5 1003000100 TIRE ASSY (4.
P A GE 48 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOBUG LIGHTING SYSTEM — OUTRIGGER ASSY . OUTRIGGER ASSY .
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 49 GLOBUG LIGHTING SYSTEM — OUTRIGGER ASSY . OUTRIGGER ASSY .
P A GE 50 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOB UG LIGHTING SYSTEM — MAST AD APTER ASSY . MAST AD APTER ASSY .
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 51 MAST AD APTER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 2202390100 S T AND ASSY .
P A GE 52 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOBUG LIGHTING SYSTEM — MAIN MAST ASSY . MAIN MAST ASSY .
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 53 GLOBUG LIGHTING SYSTEM — MAIN MAST ASSY . MAIN MAST ASSY .
P A GE 54 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOBUG LIGHTING SYSTEM — MAST SECTION ASSY . MAST SECTION ASSY .
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 55 GLOBUG LIGHTING SYSTEM — MAST SECTION ASSY . MAST SECTION ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 2072050112 SECOND MAST 1 2 2002262010 BRACKET (PULLEY) .
P A GE 56 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOBUG LIGHTING SYSTEM — B ASEPLA TE CO VER ASSY . BASEPLA TE CO VER ASSY .
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 57 GLOBUG LIGHTING SYSTEM — B ASEPLA TE CO VER ASSY . BASEPLA TE CO VER ASSY .
P A GE 58 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOBUG LIGHTING SYSTEM — B ALLAST ASSY . BALLAST ASSY .
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 59 GLOBUG LIGHTING SYSTEM — B ALLAST ASSY . BALLAST ASSY . NO .
P A GE 60 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOBUG LIGHTING SYSTEM — F AN BLO WER/LAMP B ASE ASSY .
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 61 GLOBUG LIGHTING SYSTEM — F AN BLO WER/LAMP B ASE ASSY . F AN BLOWER/LAMP BASE ASSY .
P A GE 62 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) GLOBUG LIGHTING SYSTEM — B ALLOON/LAMP GU ARD ASSY .
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 63 GLOBUG LIGHTING SYSTEM — B ALLOON/LAMP GU ARD ASSY . BALLOON/LAMP GU ARD ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 1800001200 BALLOON CLO TH CP 1 2 0011808025 BU T TO N SCREW & W ASHER (M8 X 25) 8 3 A100013400 PRIMAR Y CO VER .
P A GE 64 — GLOBUG LIGHTING SYSTEM — OPERA TION & P ARTS MANU AL — REV . #3 (03/22/06) Effective: October 1, 2002 TERMS AND CONDITIONS OF SALE — P ARTS P A YMENT TERMS T er ms of payment f or par ts are net 30 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice.
GLOBUG LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #3 (03/22/06) — PAGE 65 NO TE P A GE.
OPERA TION & P AR TS MANUAL MUL TIQUIP INC . . . . . 18910 WILMINGT ON AVE. CARSON, CALIFORNIA 90746 800-421-1244 • 310-537-3700 F AX: 310-537-3927 E-mail:mq@multiquip.
Ein wichtiger Punkt beim Kauf des Geräts Multiquip GB114BC (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Multiquip GB114BC noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Multiquip GB114BC - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Multiquip GB114BC reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Multiquip GB114BC erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Multiquip GB114BC besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Multiquip GB114BC verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Multiquip GB114BC. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Multiquip GB114BC gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
