Benutzeranleitung / Produktwartung ASANTE MacCon Family Ethernet Network Cards for the Macintosh des Produzenten Asante Technologies
Zur Seite of 65
MacCon Family E thernet Network Cards for the Macintosh Installation Guide ASANTÉ MacConi Front Cover Page 1 Friday, August 23, 1996 10:16 AM.
Asanté MacCon Adapter Family Installation Guide Asanté T echnologies, Inc. 821 Fox Lane San Jose, CA 95131 October 1994 Part Number 06-00141-00 Rev .
Copyright Notice Copyright 1994 b y Asanté T ec hnologies, Inc. All rights reser ved. No part of this manual, or any associated artwork, software, product design or design concept, may be copied, rep.
Asanté W arranty Disclaimer Asanté T echnologies, Inc. makes no other warranties, express, implied or otherwise, regarding Asanté Ethernet interface card products, and specifically disclaims an y warranty for mer chantability or fitness f or a particular purpose.
Asking for assistance T o contact Asanté T echnical Support: T echnical support hours 6:00 AM to 6:00 PM P acific Standard Time USA, Monda y–Fr iday T ell us what you think Asanté T echnologies is inter ested in your comments/suggestions about our manuals.
i Table of Contents Asking for assistance i Technical support hours i Tell us what you think i Introducing the Asanté MacCon Cards 1-1 Summary of MacCon Card Features 1-2 The Math Co-processor Option.
ii Accessing Asanté MacAgent MIB 3-2 Asanté SNMP MacAgent and the TCP/IP Protocol 3-2 Asanté SNMP MacAgent as a Network Diagnostic Tool 3-3 Installing SNMP MacAgent 3-3 Configuring MacTCP 3-4 Confi.
iii List of Figures Figure 2-1 Selecting AUI, MacCon NuBus card 2-3 Figure 2-2 Disabling Link Integrity, MacCon-i NuBus card 2-4 Figure 2-3 Installing a MacCon 3 NuBus card 2-5 Figure 2-4 Installing M.
Chapter 2 1-1 Chapter 1 Intr oducing the Asanté MacCon Car ds Thank you f or purchasing a MacCon networ k interface card from Asanté T echnologies. Asanté’ s MacCon cards enable you to connect any Macintosh with an av ailable e xpansion slot to a high speed Ether- net networ k.
1-2 Introducing the Asanté MacCon Cards The term MacCon car ds is used in this manual to ref er to all cards in the MacCon Famil y . When text applies only to a specific car d, it is identified by its name.
Chapter 2 2-1 Chapter 2 Installing Asanté MacCon Car ds This chapter pro vides step-by-step instructions for installing Asanté MacCon Ethernet network interf ace cards and EtherT alk software.
2-2 Installing Asanté MacCon Cards ❏ The appropriate Asanté card and Ethernet hardware f or your cabling: Refer to Appendix B for detailed Ethernet specifications. Observing the Safety Rules Do not remov e the network interface car d from its anti-static bag until you are r eady to insert it into the expansion slot.
Installing Asanté MacCon Cards 2-3 ❏ Ground yourself by using an anti-static wrist strap. Attac h it to the chassis once y ou have opened the Macintosh, but before handling the Asanté card or touching an y component inside the system. ❏ Handle the Asanté card by the edges and av oid touching the connectors and chips.
2-4 Installing Asanté MacCon Cards MacCon-i NuBus Card ∆ Note: If you wish to disable link integ r ity , use the JP1 jumper on the MacCon NuBus card, as shown in Figur e 2- 2. (For e xample, hubs made befor e the 10BaseT specifica- tions were pub lished do not suppor t link integrity .
Installing Asanté MacCon Cards 2-5 Figure 2-3 Installing a MacCon 3 NuBus card — Gentl y press on the card until the connector is full y seat- ed and the card is flush with the card holders at both ends.
2-6 Installing Asanté MacCon Cards Figure 2-4 Installing MacCon NuBus card, Apple Centris 610 Installing the MacCon 610 Card If you hav e a Macintosh Centr is 610, you can use a MacCon 610 card to connect to the Ethernet. Each card consists of tw o par ts: ❏ The larger controller card, which plugs into the e xpansion slot in the Macintosh.
Installing Asanté MacCon Cards 2-7 ∆ Note: In some cases with Thick Ethernet (10Base5) ca bling when your netw ork does not hav e 10Base5-compliant Ether net transceivers, you ma y need to for ce the NuBus card to select the A UI port by setting the JP1 jumper ON as shown in Figure 2-5.
2-8 Installing Asanté MacCon Cards 3 P ower do wn the Macintosh. Disconnect and remove the power cable. 4 Open the Macintosh and remov e the access por t cover . 5 Make sure you ar e grounded: check that y our anti-static wrist strap is properly attac hed to your wrist and to the Macintosh chassis.
Installing Asanté MacCon Cards 2-9 Installing a MacCon LC Card If you hav e a Macintosh LC, LCII, or Color Classic computer , use the MacCon LCIII or MacCon-i LC card to connect the Macintosh to the Ethernet. Caution Only the LC and LCII computers can accept FPUs on the LC card.
2-10 Installing Asanté MacCon Cards With the car d’ s components facing down, carefully angle its e xternal connector through the Ethernet por t, then line up its edge connector with the motherboar d expansion slot. 5 Gently pr ess on the car d until the connector is fully seated (see Figure 2-9).
Installing Asanté MacCon Cards 2-11 2 Remove the r ear access panel case (see Figure 2-10). Figure 2-10 The rear panel remov ed on the Color Classic 3 Make sure you ar e grounded: check that y our anti-static wrist strap is properly attac hed to your wrist and to the Macintosh chassis.
2-12 Installing Asanté MacCon Cards With the connectors facing down, carefully angle its e xter nal con- nector through the Ethernet por t (see Figur e 2-11). Figure 2-11 Installing the MacCon LC in the e xpansion slot in the Color Classic 6 Plug the card’ s edg e connector into the e xpansion slot on the motherboard.
Installing Asanté MacCon Cards 2-13 Installing the MacCon3 IIsi and MacCon 30i Cards If you hav e a Macintosh IIsi or a Macintosh SE/30, use a MacCon3 IIsi or a MacCon+ 30i to connect to the Ethernet.
2-14 Installing Asanté MacCon Cards Video Options Even though the Macintosh IIsi has onl y one expansion slot, you can install both a MacCon3 IIsi card and the Radius video card. An exter- nal interface device is not needed and high perf or mance is main- tained.
Installing Asanté MacCon Cards 2-15 Installing the Math Co-processor If your Macintosh, or the Radius card, already has a math co-proces- sor , do not install the Asanté math co-processor option.
2-16 Installing Asanté MacCon Cards Installing in a Macintosh IIsi T o install the MacCon+ 30 or a MacCon3 IIsi in a Macintosh IIsi, per- form the f ollowing steps: Caution Be very careful when you open the case and wor k inside the Mac- intosh IIsi.
Installing Asanté MacCon Cards 2-17 Figure 2-13 Removing the MacCon3 IIsi daughter card Figure 2-14 Installing a MacCon3 IIsi card with a Radius card MacCon3 IIsi daughter card AUI part removed force.
2-18 Installing Asanté MacCon Cards Installing a MacCon3 IIsi and a Radius Pivot IIsi T o install a MacCon3 IIsi card and a Radius Pivot IIsi card, perform the first three steps on page 2-17, then perform the steps below . Caution Handle the Asanté cards and the video cards carefull y so the y remain plugged tog ether .
Installing Asanté MacCon Cards 2-19 Figure 2-15 Installing a MacCon+ 30i card in a Macintosh SE/30 Installing a MacCon Card in a Macintosh SE/30 Caution Be very careful when you open the case and wor k inside the Mac- intosh SE/30.
2-20 Installing Asanté MacCon Cards 3 Make sure you ar e grounded: check that y our anti-static wrist strap is properly attac hed to your wrist and to the Macintosh chassis. 4 Disconnect the speaker , power suppl y , flopp y drive, and hard drive cables (see F igure 2-15 on page 2-19).
Installing Asanté MacCon Cards 2-21 Installing a MacCon+ SE Card in a Macintosh SE The MacCon+ SE networ k interface car d allows you to connect a Macintosh SE to an Ethernet network. The card consists of two parts. ❏ The larger controller car d, which plugs into the e xpansion slot in the Macintosh.
2-22 Installing Asanté MacCon Cards T o install the MacCon+ SE card in the Macintosh SE, perform the fol- lowing steps: Figure 2-16 Installing the MacCon SE daughter controller card and daughter card Caution Be very careful opening and working inside the Macintosh SE.
Installing Asanté MacCon Cards 2-23 5 T ake out the motherboard: — Lift the gr ounding shield (padded aluminum sheet) cov- ering the motherboard. — Disconnect the pow er supply cable and the drive cables on the component side of the motherboard.
2-24 Installing Asanté MacCon Cards 9 Place the motherboard (with the MacCon+ controller car d riding pigg yback on it) back into the guides on the left side of the chassis. 10 Reconnect the power suppl y and the disk drive cable on the component side of the motherboard.
Installing Asanté MacCon Cards 2-25 1 Connect the “T” connector to the BNC port on the card. The connector slips on, twists, and locks in place. 2 If the Macintosh is the last node, ter minate one end of the “T” connector using a 50-ohm BNC ter minator (for thin ca- ble).
2-26 Installing Asanté MacCon Cards The follo wing table e xplains which installation to choose: About EtherT alk Phase 1 and Phase 2 EtherT alk Phase1 is limited to 255 devices and allows only one zone. EtherT alk Phase 2 has vir tually no limit (maximum—ov er 16 million devices) and allows multiple zones.
Installing Asanté MacCon Cards 2-27 2 Insert the Asanté EtherT alk Installer Disk. 3 Double-clic k the Installer icon and click OK when the In- staller banner appears. The Easy Install dialog box appear s (see Figure 2-17). ∆ Note: T o properly install the EtherT alk Installer pr o- gram, you must double-clic k the Installer icon.
2-28 Installing Asanté MacCon Cards Accessing Network Services T o make the connection between your Macintosh and the Ethernet networ k wor k, you need the f ollowing: ❏ AppleT alk must be active i.
Installing Asanté MacCon Cards 2-29 Y our connection to Ethernet remains active until you switc h to LocalT alk, disconnect the cable, or remove the Asanté interface card.
Chapter 2 3-1 Chapter 3 Asanté SNMP MacAgent Introduction Asanté SNMP MacAgent pr ovides har dwar e and softwar e inf ormation from a Macintosh to an Asanté network management station running AsantéVie w . It works in conjunction with Apple’ s MacTCP software.
3-2 Asanté SNMP MacAgent Requirements The requirements f or Asanté SNMP Agent are AsantéView In-Band Network Management Software AsantéVie w is powerful networ k management softwar e used to man- age Asanté intelligent Ethernet hubs and br idg es.
Asanté SNMP MacAgent 3-3 SNMP MacAgent f orwards f our types of information a bout the station: ❏ Station Profile, including station hardwar e components, sys- tem and memor y ❏ Station Slot T a.
3-4 Asanté SNMP MacAgent 4 Click Customize . The Customize Install dialog bo x appears, shown in Figure 3-1. Figure 3-1 Customize Install dialog box 5 Select the SNMP MacAgent f or the appropr iate operat- ing system. 6 Select MacTCP for the appropriate operating system.
Asanté SNMP MacAgent 3-5 2 Double-clic k the MacTCP icon. The MacTCP Configura- tion screen appears, shown in Figure 3-2. Figure 3-2 MacTCP Configuration screen ❖ Note: T o configure MacTCP , see the MacTCP Adminis- trator’ s Guide. This guide is included with the Asanté- Vie w documentation.
3-6 Asanté SNMP MacAgent 2 Double-clic k the SNMP MacAgent control panel. The SNMP MacAgent Configur ation screen appear s, shown in Figure 3-3. Figure 3-3 Asanté SNMP MacAgent Configur ation screen 3 Enter the configuration parameters (see the ne xt section for par ameter descriptions).
Asanté SNMP MacAgent 3-7 ∆ Note: The defaults f or Read-community and Wr ite-commu- nity should be used unless you are told otherwise by y our networ k administrator . T rap-community Enter public. (T rap is the SNMP term for alarm or alert.) Public is usually the def ault f or the SNMP configuration.
3-8 Asanté SNMP MacAgent A Macintosh icon display ed on the map with an “ A ” indicates the Asanté SNMP MacAgent is installed. If a Macintosh has Asanté’ s SNMP MacAgent installed, the Asant.
Chapter 2 4-1 Chapter 4 Using T r oubleShooter and ADLS Diagnostic Softwar e The T roubleShooter and Asanté Dr iver Local Statistic (ADLS) prog rams are included with the EtherT alk drivers on the Asanté EtherT alk Installer diskette.
4-2 Running T roubleShooter Diagnostics 4 Restart the Macintosh. Starting T r oubleShooter Diagnostics 1 Insert the EtherT alk Installer diskette and open the dis- kette’ s director y window . 2 Copy the T roubleShooter software to the desktop or a folder , such as the Net Utils folder .
Using TroubleShooter and ADLS Diagnostic Software 4-3 • Memor y Buffer T est Writes to and reads from the packet buffer RAM to v er- ify its addressability and operation. • Networ k Interface Controller T est Writes to and reads from the controller register to v er- ify its operation.
4-4 Running other T roubleShooter tests Running the Loopback test The Loopback test v erifies the operation of the major components of the interface cir cuitr y and the ca ble run to the hub by transmitting and receiving special packets. ❖ Note: The Macintosh with the MacCon adapter installed must be connected to a hub to run the Loopback test.
Using TroubleShooter and ADLS Diagnostic Software 4-5 The performance statistics are displa yed in the T rouble- Shooter dialog box. Figure 4-3 Bandwidth Utilization T est window What the Bandwidth Utilization test displays The Bandwidth Utilization test takes a “snap shot” of the network.
4-6 Running other T roubleShooter tests • CRC Error Indicates the number of packets with CRC (Cyclic Redun- dancy Check) errors received from the netw ork by the adapter . When a packet is transmitted, a mathematical cal- culation is done on the header and data and is appended to the end of the frame.
Using TroubleShooter and ADLS Diagnostic Software 4-7 If the test fails repeatedl y , make a note of the error message, quit the T roubleShooter diagnostics, and call T echnical Support.
4-8 Running ADLS T o star t the ADLS program, double-click its icon. Figure 4-4 shows an e xample of the screen that appears. Figure 4-4 Asanté Driver Local Statistic (ADLS) ta ble When the progr am opens, it automatically begins gathering statistics.
Chapter 2 5-1 Chapter 5 T r oubleshooting This chapter addresses a f ew problems y ou may encounter when installing or using an Asanté MacCon network interf ace card. If you are unable to solv e a problem after reading this c hapter , please call Asanté T ech Support f or assistance at 800-622-7464 or 408-435-0706.
5-2 T roubleshooting T o lear n the latest version number: ❏ Call 800-622-7464 and press 4 for T echnical Support ❏ Then press 1 for Softw are Update information Y ou will obtain the current version number as well as instructions for downloading Asanté Ether net dr ivers from Applelink or InterNet.
Troubleshooting 5-3 Questions and Answers to Common Problems Q The AppleT alk zones are not in the Chooser and I can’t connect to my remote file server . What’s wrong? A ❏ AppleT alk may not be active in the Chooser . ❏ EtherT alk may not be selected in the Network contr ol panel.
5-4 T roubleshooting Q After I restart my Macintosh, the LocalT alk icon is selected, instead of the EtherT alk. A Make sure that: ❏ The Asanté EtherT alk driver is on the start-up disk or in the Sys- tem folder . ❏ The Asanté card is properl y seated.
Chapter 2 A-1 Appendix A 23 2 T echnical Specifications MacCon Specifications The specifications for the Asanté MacCon cards are giv en below . Systems supported Macintosh SE, SE/30, IIsi, LC family , Color Classic, Quadra, MacII (NuBus) family , Centris, and Per - forma computers with an available expansion slot Standards supported IEEE 802.
A-2 T ec hnical Specifications Ethernet Addr ess Each Asanté card has a 6 byte Ether net physical address beginning with 00.00.94. In Figure A-1, an arrow points to the location of the Ethernet address on each card.
Technical Specifications A-3 MacCon LEDs The LEDs for the MacCon NuBus, LC, IIsi, and SE cards are described below . Ether net Specifications The table below lists the Ethernet specifications.
A-4 T ec hnical Specifications Y ou may find the f ollowing tips useful. ❏ 10BaseT The wiring nor mally called f or in 10BaseT is 26 to 22 A WG , which corresponds to the wire gaug e of telephone twisted- pair cables. Y ou need two pair s of wiring for each node.
Technical Specifications A-5 Asanté FriendlyNet cards and Apple computers and pr inters with built-in Ethernet do not directly connect to the Ethernet cable; instead, an external transceiv er , like the Asanté FriendlyNet Media adapter , is used.
A-6 T ec hnical Specifications Figure B-1 A UI connector pin number assignments RJ-45 Connector The RJ-45 connector’ s pin numbers listed below are for an Asanté 10BaseT card positioned correctly with the notc h on the 8 pin mod- ular jack oriented down.
Ein wichtiger Punkt beim Kauf des Geräts Asante Technologies ASANTE MacCon Family Ethernet Network Cards for the Macintosh (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Asante Technologies ASANTE MacCon Family Ethernet Network Cards for the Macintosh noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Asante Technologies ASANTE MacCon Family Ethernet Network Cards for the Macintosh - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Asante Technologies ASANTE MacCon Family Ethernet Network Cards for the Macintosh reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Asante Technologies ASANTE MacCon Family Ethernet Network Cards for the Macintosh erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Asante Technologies ASANTE MacCon Family Ethernet Network Cards for the Macintosh besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Asante Technologies ASANTE MacCon Family Ethernet Network Cards for the Macintosh verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Asante Technologies ASANTE MacCon Family Ethernet Network Cards for the Macintosh. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Asante Technologies ASANTE MacCon Family Ethernet Network Cards for the Macintosh gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
