Benutzeranleitung / Produktwartung iCell GPRS (MTSMC-G2-IP des Produzenten Multi-Tech Systems
Zur Seite of 119
Univer sal IP AT Commands Referen ce Guide.
Copyright a nd Techni cal Supp ort Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 2 Universal IP AT Comm ands Refer ence G uide for the following products : SocketM odem iCell GP.
Table of Co ntents Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 3 Co ntents Part 1 – ................................................................................................................................................
Table of Co ntents Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 4 #POP3PW – Set PO P3 Pa sswo rd ....................................................................................................... 26 #POP3S ERV – Set POP3 Server A ddress .
Table of Co ntents Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 5 #LUD PSTOP – C lose UDP Listening M ode ........................................................................................ 46 #OUTPORT – UDP/TCP L ocal Port N umber .
Table of Co ntents Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 6 Display Com m a nds .................................................................................................................................. 60 #IPDN STABL E – Disp lay D NS Ta ble .
Table of Co ntents Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 7 #ANSW ER MODE – Set Ans weri ng Mod e ........................................................................................... 75 #SMS PHRAS E – Set Inco ming SMS Phrase .
Table of Co ntents Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 8 #GPSG PRMC – Enable/D isable G PRMC M essage ............................................................................ 94 #GPSG PVTG – Enable/Dis able GP VTG Mes sage .
Part 1 – Commands f or All Uni versal IP Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 9 Part 1 – AT Commands for Al l Univ ersal IP Devi ces Chapter 1 – Gen era l A .
Part 1 – AT Comma nds for Al l Univ ersal IP Devi ce s Chapter 1 – General AT Commands fo r All U niversal IP D evice s Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 10 C hapter.
Part 1 – AT Comma nds for Al l Univ ersal IP Devi ce s Chapter 1 – General AT Commands fo r All U niversal IP D evice s Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 11 Z – Default Configuration Descripti on: This command r estores the configurat ion prof ile from NVM.
Part 1 – AT Comma nds for Al l Univ ersal IP Devi ce s Chapter 1 – General AT Commands fo r All U niversal IP D evice s Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 12 &W – Store F actory Defaults to N VM Descripti on: For MT100SEM : S tores f actory defaults to the N VM.
Part 1 – AT Comma nds for Al l Univ ersal IP Devi ce s Chapter 1 – General AT Commands fo r All U niversal IP D evice s Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 13 +IFC – S et Flow Control Descripti on: Tur ns flow contro l on and o ff.
Part 1 – AT Comma nds for Al l Univ ersal IP Devi ce s Chapter 1 – General AT Commands fo r All U niversal IP D evice s Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 14 #LEGAC Y.
Part 1 – AT Comma nds for Al l Univ ersal IP Devi ce s Chapter 1 – General AT Commands fo r All U niversal IP D evice s Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 15 #ESCA PE.
Part 1 – AT Comma nds for Al l Univ ersal IP Devi ce s Chapter 1 – General AT Commands fo r All U niversal IP D evice s Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 16 #VSHOWUPT IME – Displays the Current Uptime in Da ys , Hours , Minutes , Sec onds Descripti on: Displa ys the current uptim e of the UI P stack .
Part 1 – AT Comma nds for Al l Univ ersal IP Devi ce s Chapter 1 – General AT Commands fo r All U niversal IP D evice s Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 17 # V AL L – Display A ll Paramet ers Note: The MT100SE M displa y of Poss ible Respons es dif fers slightl y from the MT56 92S MI - IP dis p la y.
Part 1 – AT Comma nds for Al l Univ ersal IP Devi ce s Chapter 1 – General AT Commands fo r All U niversal IP D evice s Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 18 Syntax: .
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 2 – SMT P A T Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 19 C h a p t e r 2 – S M T P AT Comm and s fo .
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 2 – SMT P A T Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 20 #DOMAIN – Set Domain N ame of the Send er Descripti on: W hen sending an em ail m essage, the T CP/IP st ack s oftware mus t provide the SMT P server with the dom ain name of the sender .
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 2 – SMT P A T Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 21 #BODY i – Set Pre - Defined Email Combinations Descripti on: Thes e parameter s store pr e - defined m essage bod ies.
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 2 – SMT P A T Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 22 #SMTPPW – Set SMTP Pa ssword Descripti on: To s end email m essages , some SMT P servers are us ing an au thenticat ion proce ss.
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 2 – SMT P A T Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 23 #SENDM A ILi – Se nd Mail without Interactive Mode Important N o te : MT5692 SMI - IP su pports o nly SEND MAIL1 opti ons.
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 2 – SMT P A T Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 24 # P UT M AI L – Send Mail to Recipient wi t.
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 2 – SMT P A T Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 25 #SMTP A UTH – Authentication ON or OFF Descripti on: Turns authenticati on ON or OFF.
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 3 – POP3 AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 26 C h a p t e r 3 – PO P3 AT Comm an ds fo r A .
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 3 – POP3 AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 27 #POP3UN – Set POP3 User N ame Descripti on: User nam e for POP3 accou nt.
Part 1 – AT Comma nds for Al l Universal IP Devic es Chapter 4 – FTP AT C omm ands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 28 C h a p t e r 4 – F T P AT Com ma nd s fo r.
Part 1 – AT Comma nds for Al l Universal IP Devic es Chapter 4 – FTP AT C omm ands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 29 #FTPSERV – Sp ecify FTP Serv er A ddress Descripti on: FTP s erver address .
Part 1 – AT Comma nds for Al l Universal IP Devic es Chapter 4 – FTP AT C omm ands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 30 #FTPGET – D own l oad Files from FTP Serv e.
Part 1 – AT Comma nds for Al l Universal IP Devic es Chapter 4 – FTP AT C omm ands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 31 #FTPGETP A TH – Set Path to Get a F ile fro.
Part 1 – AT Comma nds for Al l Universal IP Devic es Chapter 4 – FTP AT C omm ands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 32 Display Command #VFTP – Display FTP Parameter s Descripti on: This c ommand direc ts the T CP/IP stack to displa y all AT # param eters for the FTP client c onfigurat ion.
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 5 – TCP AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 33 C h a p t e r 5 – TC P AT Commands fo r A l l Univ er sal IP De v ices Set Com man ds The id par ameter is used for s etting up pr ofiles; Pr ofile 1 a nd Prof ile 2.
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 5 – TCP AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 34 #TCPPO RT – Set TCP Port for R e mote Peer Descripti on: To ex change data over TC P, the TCP/IP stack software m ust k now the port of the rem ote peer used for the TCP ses sion.
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 5 – TCP AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 35 #TCPP A CKETMIN – TCP Client Transmit Packet Minimum S ize Descripti on: This par ameter determines the minim um pack et size th e TCP Client will trans mit.
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 5 – TCP AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 36 #TCPINACTIVITYTIMER – TCP Client Inactivity Ti.
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 5 – TCP AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 37 #TCPTELNETMODE – E na ble/Disable TCP Client Telnet Proto col Descripti on: Enables or dis a bles the T CP Cl ie nt Telne t protocol.
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 5 – TCP AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 38 #TCPTELNETUN – Set the TCP Client Te lnet Protocol Us er Na me Descripti on: Configure the TCP Cl ient Telnet prot ocol login u ser name .
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 5 – TCP AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 39 #LTCPSTOP – C lose TCP Lis tening Mode Descripti on: This c ommand direc ts the T CP/IP stack to close a T CP listen ing m ode (previous ly launc hed b y the AT #LTCPST ART comm and.
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 5 – TCP AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 40 Display Command #VTCP – Display TCP Parameters Descripti on: This c ommand direc ts the T CP/IP stack to displa y all the AT # param eters r elated to the T CP socket c onfigurat ion.
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 6 – U DP AT C ommands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 41 C h a p t e r 6 – U D P AT Comm ands fo r A .
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 6 – U DP AT C ommands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 42 #UDPP A CKETM AX – UDP C lient Tr ansmit Packet M aximum Si ze Descripti on: T his param eter determ ines the m aximum packet si ze the UD P Client w ill transm it.
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 6 – U DP AT C ommands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 43 #UDPIGNO RESRCPORT – Ignore Send Source Port Descripti on: Allo ws the UD P client to ignore th e rem ote IP's sourc e port.
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 6 – U DP AT C ommands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 44 #UDPSERV – U DP Serv er Ad dress Descripti on: If the UD P sess ion is init iated in list en m ode, use the I P addres s filter.
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 6 – U DP AT C ommands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 45 #UDPDLEMODE – Set DLE Mode Descripti on: The attached host has th e choic e whether or not to c ode the ET X char acter.
Part 1 – AT Comma nds for All Universal IP Devic es Chapter 6 – U DP AT C ommands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 46 #L UDPSTOP – Close UDP Listening Mode Descripti on: This command dir ects the T CP/IP stack to close a U DP l istening m ode ses sion prev iously launched b y the AT#UDP S T ART comm and.
Part 1 – AT Commands for All U niver sa l IP Device s Chapter 7 – PING AT C ommands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 47 C h a p t e r 7 – PING AT Comm an ds fo r A l l Univ er sal IP De v ices Set Com man ds General N ote: Du e to var ying factors , PING resp onse tim es ma y not be valid.
Part 1 – AT Commands for All U niver sa l IP Device s Chapter 7 – PING AT C ommands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 48 Display Comman d #VPING – Disp lay PING Param eters Descripti on: D is p l a y P I N G m odule relat ed inform ation .
Part 2 – AT Commands for the SocketEth ernet IP Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 49 Part 2 – AT Commands for the Sock etE thern et IP Chapter 8 – Gen era l AT Com.
Part 2 – AT Comma nds for t he SocketEth ernet IP Chapter 8 – General AT Commands for SocketEt hernet I P Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 50 C h a p t e r 8 – G eneral AT Co mm ands f or t he Sock etEther net IP Set Com man ds #DHCP – DHCP On or Off Descripti on: Enables or disabl es the DH CP clie nt.
Part 2 – AT Comma nds for t he SocketEth ernet IP Chapter 8 – General AT Commands for SocketEt hernet I P Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 51 #IPNET MA SK – Set S ubnet Mask Descripti on: Sets the s ubnet m ask. Note: The module m ust be reset to put t he comm and into ef fect.
Part 2 – AT Comma nds for t he SocketEth ernet IP Chapter 8 – General AT Commands for SocketEt hernet I P Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 52 #HOSTNA ME – Configure the DHCP Clie n t Host Nam e Descripti on: Configures t he device host nam e reported t o the DHC P server .
Part 2 – AT Comma nds for t he SocketEth ernet IP Chapter 8 – General AT Commands for SocketEt hernet I P Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 53 #VIP – Vie w Ad dress Settin gs Descripti on: Displays the a ddress s ettings .
Part 2 – AT Comma nds for t he SocketEth ernet IP Chapter 9 – Auto Discove ry AT Commands for the S oc ketEt her net IP Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 54 C h a p .
Part 2 – AT Comma nds for t he SocketEth ernet IP Chapter 9 – Auto Discove ry AT Commands for the S oc ketEt her net IP Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 55 #AUTODISCUSERN AME – Set A uto D iscov er User Name Descripti on: This c ommand s ets the Us er Nam e that will ap pear in the Auto Disc overy Ma nager.
Part 3 – AT Comma nds for SocketWireles s Wi - Fi Devic es Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 56 Part 3 – AT Commands for Sock etWi r eles s Wi - Fi D evices Chapter .
Part 3 – AT Comma nds for Wi - Fi Device s Chapter 1 0 – IP AT Command s for the So cket W ir eless W i - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 57 C h a p t e r 1 0 .
Part 3 – AT Comma nds for Wi - Fi Device s Chapter 1 0 – IP AT Command s for the So cket W ir eless W i - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 58 #IPNET MA SK – Set Subn et M ask Descripti on: Set s th e subnet m ask .
Part 3 – AT Comma nds for Wi - Fi Device s Chapter 1 0 – IP AT Command s for the So cket W ir eless W i - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 59 #IPRELEA SE – Rel.
Part 3 – AT Comma nds for Wi - Fi Device s Chapter 1 0 – IP AT Command s for the So cket W ir eless W i - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 60 Display Command s #.
Part 3 – AT Commands for W i - Fi Dev ices Chapt er 11 – Ge neral AT Commands fo r the Soc ket W irel ess Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 61 C h a p t e r .
Part 3 – AT Commands for W i - Fi Dev ices Chapt er 11 – Ge neral AT Commands fo r the Soc ket W irel ess Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 62 #BOOTMSG – Enable/Disable Boot Message Descripti on: Enables /dis a bles the boot m essage.
Part 3 – AT Commands for W i - Fi Dev ices Chapt er 1 2 – Tel net AT C ommands f or the So cket W irele ss Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 63 C h a p t e r.
Part 3 – AT Commands for W i - Fi Dev ices Chapt er 1 2 – Tel net AT C ommands f or the So cket W irele ss Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 64 #TELNETPA SSWORD – Set Telnet Pass word Descripti on: Sets T elnet pass word.
Part 3 – AT Commands Wi - Fi Dev ices Chapter 1 3 – W LAN AT Com mands for t he Socket W ireles s Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 65 C h a p t e r 1 3 – .
Part 3 – AT Commands Wi - Fi Dev ices Chapter 1 3 – W LAN AT Com mands for t he Socket W ireles s Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 66 #WL A NSC ANMODE – Scanning Mode Descripti on: S ets sc anning m ode. The m odule can work in both activ e scanning and pas sive scanni ng modes .
Part 3 – AT Commands Wi - Fi Dev ices Chapter 1 3 – W LAN AT Com mands for t he Socket W ireles s Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 67 #WL A NCONNECT – Connect with A P Descripti on: Connec ts the m odul e with AP.
Part 3 – AT Commands Wi - Fi Dev ices Chapter 1 3 – W LAN AT Com mands for t he Socket W ireles s Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 68 #WL A NPROFILEn= n – Cha nge the WLAN Profile Descripti on: This command c hanges the W LANPRO FILE.
Part 3 – AT Commands Wi - Fi Dev ices Chapter 1 3 – W LAN AT Com mands for t he Socket W ireles s Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 69 #WLANU SEPROFILE – User Profile Descripti on: Set s and displ ay s the use pr ofile value.
Part 3 – AT Commands Wi - Fi Dev ices Chapter 1 3 – W LAN AT Com mands for t he Socket W ireles s Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 70 #WEP128K EY – Key s for WEP 128 Se curity Mode Descripti on: Sets k eys for W EP128 Secur ity mode.
Part 3 – AT Commands Wi - Fi Dev ices Chapter 1 3 – W LAN AT Com mands for t he Socket W ireles s Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 71 Display Command s #W EP? – See the V alue of the W EP K e ys Descripti on: This command dis plays the values of the W EP ke y s.
Part 3 – AT Commands Wi - Fi Dev ices Chapter 1 3 – W LAN AT Com mands for t he Socket W ireles s Wi - Fi Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 72 # W L AN ? – WLAN Module Descripti on: Displa ys W LAN m odule - related inf or m ation.
Par t 4 – AT Comma nds for t he SocketM odem i Cell, SocketM odem IP, MultiM odem iCell Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 73 Part 4 – AT Commands for the Sock e tMod.
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 74 C h a p t e r 1 4 – AT C.
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 75 #ANSWERMODE – Set Ans w ering Mode Descripti on: The TCP/IP s tack c an handle inc oming cal ls.
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 76 #CALLBACKTIMER – Set Aut.
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 77 #KEEPA LIVEPORT – K eep -A li ve Port Number Descripti on: If the keep - alive s ession is T CP, then keep al ive port controls t he rem ote host por t num ber.
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 78 # AT C M D – Customize D ial - Up Commands Descripti on: This c ommand allo ws the u ser to cus tomize AT commands o n dial up.
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 79 #RINGCOUNT – S et Number.
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 80 #DIAL SELECT – Set Internet Connection Number Descripti on: The value of this c omm and determ ines the num ber c alled to est ablish an In ternet connecti on.
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 81 Incom ing Call M anag eme nt Com ma nds #ACCEPT – A nswe r Incoming Call Descripti on: This c ommand direc ts the T CP/IP stack to ans wer an incom ing cal l.
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 82 #CONNECTIO NSTART – Start Communication Descripti on: This c ommand direc ts the T CP/IP stack to originat e an out going call .
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 83 #AUTOCONNECT – Automaticall y Connect the PP P Link Descripti on: #AUTOCONNECT enables/ disables t he autom atic link connection.
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 84 #PPPSERVUN – Set U ser N.
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 85 #GPRSCI D – Set PDP Contex t Identifi e r Descripti on: #GPR SCID is the PD P context id entifier which spec ifies a par ticular PD P contex t definit ion.
Part 4 – AT Comma nds for the SocketM odem iCell, S ocketM odem IP, a nd MultiM odem i Cell Chapter 1 4 Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 86 #VPPP – Di splay PPP Paramet ers Descripti on: This c ommand direc ts the T CP/IP stack to displa y all the AT # param eters r elated to the P PP layer conf iguration.
Part 5 – GPIO AT C ommands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 87 Part 5 – GPIO AT Comm ands Chapter 15 – GPIO AT Commands.
Part 5 – GPIO AT C ommands Chapter 1 5 – G PIO AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 88 Chap t e r 1 5 – GPIO AT Com ma nds About GP IO If the spec ific ha.
Part 5 – GPIO AT C ommands Chapter 1 5 – G PIO AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 89 Hangup: Determ ines whether to disc onnect from the netw ork af ter GPIOs ha ve been proc essed.
Part 5 – GPIO AT C ommands Chapter 1 5 – G PIO AT Commands Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 90 #GPIOTRIGGER – Co nfigure the GPIO pin and trigger type Descripti on: Co nfigure the GPIO pin and trigger type.
Part 6 – AT Comma nds for GP S - Enabled D evices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 91 Part 6 – AT Comm ands fo r GPS - Enabl ed Devi ce Chapter 16 – Commands for .
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 92 C h a p t e r 1 6 – A.
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 93 #GPSURA IS – Set GPS .
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 94 #GPSGPGLL – Enabl e/Disabl e GPGLL Message Descripti on: This c ommand enab les or dis ables the r eporti ng of N MEA GPG LL mes sages.
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 95 #GPSGPVTG – Enabl e/Disabl e GPVTG M essage Descripti on: This c ommand enab les or dis ables the r eporting of NME A GPVT G mess ages.
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 96 GPS Me ssage Sy ntax GP.
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 97 GPS Configu r ation Exa.
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 98 Applic ation N ote – .
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 99 SUPPORTED M ESSAGE LIST The f ollowing NME A messages are supp orted.
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 100 GL L – Latitude/Longitude Latitude an d longit ude of c urrent pos ition, tim e, and st atus.
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 101 GSV – GNSS Satel lites in Vi ew Num ber of satellit es (SV) in view, satel lite ID num bers , elevation, a zimuth, a nd SNR value.
Part 6 – AT Comma nds for GP S - Enabled D evices C hapter 1 6 – AT Commands for G PS - Enabled Dev ices Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 102 RMC – Recomme nded Minimum Specific GNSS Data Tim e, date, posit ion, course an d speed d ata prov ided b y a GNSS nav igation rec eiver.
Part 7 – Appendix es Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 103 Part 7 – Appendixes A ppendi x A – Resp onse Mes sages and Err or Cod es A ppendi x B – Respon se Mess.
Part 7 – Appendix es Appendix A – Response M essages and Error Cod es Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 104 Appen dix A – Respo nse M ess ages & Er ror Cod es .
Part 7 – Appendix es Appendix A – Response M essages and Error Cod es Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 105 Error Codes Error C odes Numeric Descripti on 34817 Bad c.
Part 7 – Appendix es Appendix B – Response M essage Ex amples Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 106 Appendix B – Respo nse M ess age Ex amp les Respo nse Me ssage s Exam ples Sending/Ret rieving E mail Resp onse Me ssages Sending a n Email: AT#PUTM A IL Commands Response s AT#SMT PSERV="s mtp.
Part 7 – Appendix es Appendix B – Response M essage Ex amples Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 107 Retrie ving an Em ail: A T#GETM AIL Commands Response s AT#POP3 SERV="pop 3.do main.com " Note: POP 3 server used OK AT#POP3U N="m odule@dom ain.
Part 7 – Appendix es Appendix B – Response M essage Ex amples Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 108 FTP: Downloa d / Upload Files Res ponse Messages Upload a fi le to an FTP Server: A T#FTPPUT Commands Response s AT#FT PSERV="ftp.
Part 7 – Appendix es Appendix B – Response M essage Ex amples Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 109 TCP Sock et Respo nse Mess ages Open a T CP sock et between m achines . One mac hine acts as a caller (T CP client) ; the oth er acts as a listener ( TCP ser ver).
Index Universal IP AT Comm ands Ref erence Gu ide (Document S000457 K) 110 I n d ex # #ACCEPT – Answer Incoming Call ................................... 81 #ANSW ERMO DE – Set Answering M ode ........................ 75 #APNPW – Access Point N ame Password .
Index Universal IP AT Comm ands Ref erence Gu ide (Document S000457K) 111 #POP3PW – Set POP3 Password .................................... 26 #POP3SERV – Set POP3 Server Address ....................... 26 #POP3UN – Set POP3 User Name ...........
Index Universal IP AT Comm ands Ref erence Gu ide (Document S000457K) 112 Authentic ation ON or OFF – # SM TP AUTH ....................... 25 Authentic ation Ty pe – #AUTHENT ................................... 74 Auto Connect Module w i th AP – #WLANENABLE .
Index Universal IP AT Comm ands Ref erence Gu ide (Document S000457K) 113 #TCPPACKETMAX – TCP Client T ransmit P acket Ma xim u m S i ze .......................................................... 35 #TCPPACKETMIN – TCP Client T ransmit Pa cket M inimum Size .
Index Universal IP AT Comm ands Ref erence Gu ide (Document S000457K) 114 #TCP NETW ORKTIMER – TCP Client Networ k Transmit Safety T imeout Value ................................................ 36 #TCPPACKETMAX – TCP Client T ransmit P acket Ma xim u m S i ze .
Index Universal IP AT Comm ands Ref erence Gu ide (Document S000457K) 115 #PUTMAIL – Send M ail to Recipie nt with Int eractiv e Mode .................................................................................. 24 #RECiADD – Set Email Addr ess .
Index Universal IP AT Comm ands Ref erence Gu ide (Document S000457K) 116 #LUDPSTART – Initia te the U DP S ession in Listen Mode ........................................................................ 45 #LUDPSTOP – Close UDP Li stening Mod e ..
Index Universal IP AT Comm ands Ref erence Gu ide (Document S000457K) 117 #IPRELEASE – Release a DH CP Addres s Assigned by the Server ....................................................................... 59 #IPRENEW – Renew DHCP Informatio n from Serv er .
Index Universal IP AT Comm ands Ref erence Gu ide (Document S000457K) 118 Display C urrent Stat e of Phys ical Conne ction – #V STATE ...................................................................................... 16 Display D NS Table – #IPDNS TABLE .
Index Universal IP AT Comm ands Ref erence Gu ide (Document S000457K) 119 Retrieve H ost M ail – #G ETMA IL ....................................... 27 RLSD (DCD) Optio n – &C ................................................. 11 R MC – Recommended Minim um Specific G NSS Dat a .
Ein wichtiger Punkt beim Kauf des Geräts Multi-Tech Systems iCell GPRS (MTSMC-G2-IP (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Multi-Tech Systems iCell GPRS (MTSMC-G2-IP noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Multi-Tech Systems iCell GPRS (MTSMC-G2-IP - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Multi-Tech Systems iCell GPRS (MTSMC-G2-IP reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Multi-Tech Systems iCell GPRS (MTSMC-G2-IP erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Multi-Tech Systems iCell GPRS (MTSMC-G2-IP besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Multi-Tech Systems iCell GPRS (MTSMC-G2-IP verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Multi-Tech Systems iCell GPRS (MTSMC-G2-IP. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Multi-Tech Systems iCell GPRS (MTSMC-G2-IP gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
