Benutzeranleitung / Produktwartung TVR6 des Produzenten ASA Electronics
Zur Seite of 127
DIRECT V ® Mobile Receiver/Controller User’ s Guide.
DIRECTV ® Mobile Receiver/Controller User’ s Guide Congratulations! Y ou have chosen T racV ision, a revolutionary antenna system delivering live satellite TV entertainment on the go.
T rademarks KVH, T racVision, and DewShield are trademarks of KVH Industries, Inc. Programming, pricing, terms, and conditions are subject to change. Pricing residential. T axes not included. Receipt of DIRECTV programming is subject to the DIRECTV Customer Agreement, a cop y of which is provided at DIRECTV .
Important Safety Instructions - Please Read For your safety and protection, r ead this safety section carefully . Heed Cautions – Be sure to follow all cautions on the product and in the operating instr uctions. Cautions are indicated by a icon. Follow Instructions – Be sure to follow all operating instructions as detailed in this manual.
Federal Communications Commission (FCC) Regulatory Information f or Vehic le Use Declaration of Conf ormity – Standards to which Conformity is declared: FCC P ar t 15 This device complies with P art 15 of the FCC Rules.
Receiver/Controller Activation NOTICE: This product will NOT work corr ectly unless you follow the procedur e below . Before you can start watching satellite TV via T racV ision, the receiver/controller must be activated. Once your antenna system is fully installed, follow the steps below to activate the receiver/contr oller .
54-0376 vi DIRECTV Mobile Receiver/Controller User’ s Guide Send Us Y our Comments About This Manual If you have any comments regar ding this manual, please e-mail them to manuals@kvh.
54-0376 vii T able of Contents T able of Contents 1 Introduction . . . . . . . . . . . . . . . . . . . .1.1 1-1 Using this Manual . . . . . . . . . . . . . . . .1.3 1-2 System Ov er view . . . . . . . . . . . . . . . .1.4 1-3 Receiving Satellite TV Signals .
54-0376 viii DIRECTV Mobile Receiver/Controller User’ s Guide 7 Using Access Controls . . . . . . . . . . . . .7.1 7-1 Locking & Unloc king the System . . . .7.3 7-2 Setting Ratings Limits . . . . . . . . . . . . .7.5 7-3 Setting Time Limits . .
54-0376 1.1 Introduction 1 Introduction This section provides a basic overview of this manual and the T racVision system. It also explains the three essentials for good satellite TV reception. Contents 1-1 Using this Manual . . . . . . . . . . . . . .
1-1 Using this Manual This manual provides complete instr uctions for operating your mobile receiver/contr oller . Throughout this manual, important information is marked for your attention by the fol.
1-2 System Over view Y our T racV ision system is a state-of-the-art, actively stabilized antenna system that delivers live satellite TV to your mobile audio/video entertainment system. Mobile Receiver/Controller The mobile receiver/ controller decodes satellite TV signals from the antenna unit and sends the signals to the audio/video system.
1-3 Receiving Satellite TV Signals Like a satellite dish used at home, the T racV ision antenna needs a clear view of the DIRECTV ® satellite(s) to receive satellite TV signals. Consider the three essentials noted on the following pages to ensure tr ouble-free r eception.
Elevation Angle Since TV satellites are located above the equator , the T racV ision antenna needs to point toward the southern sky to receive satellite TV signals. In addition, the antenna must be tilted at the proper elevation angle to point at the satellite.
54-0376 2.1 Getting Started 2 Getting Started This section provides basic operation instructions, so you can quickly start using your T racVision system. Contents 2-1 T urning On the Antenna . . . . . . . . . . . . . . . . . . . . . . . . .2.3 2-2 Changing Channels .
4. If Message 1 does not appear after 30 seconds, press the r emote control’s SA T button. Then press the remote’s PWR button. The receiver beeps twice, the Antenna status light begins to flash green, and the V oltage status light should be lit green.
2.4 DIRECTV Mobile Receiver/Controller User’ s Guide 5. If Message 2 does not appear after Message 1, ensure that the antenna has a clear view of the satellite. The antenna requir es an unobstructed view of the sky to receive satellite TV signals.* Once the antenna locks onto the satellite, the receiver starts downloading the pr ogram guide.
2-3 T urning Off the Antenna T o turn off the antenna, follow the steps below: 1. Press the r emote control’s SA T button. The button should blink red . 2. Press the PWR button. The receiver beeps once to indicate that power to the antenna is turned off.
54-0376 3.1 Using the Remote Control 3 Using the Remote Control This section explains how to use the remote control functions, program the remote to work with other components, and replace the remote control batteries. Contents 3-1 Remote Control Functions .
54-0376 3.3 Using the Remote Control CH VOL PWR DVD VCR AUX TV SAT GUIDE MENU INFO CLEAR TURBO FAV MUTE CH PREV DIRECTOR PROG SEARCH AUDIO VIDEO 123 456 789 0 INPUT REW PLA Y FF REC STOP P AUSE P A G .
54-0376 DIRECTV Mobile Receiver/Controller User’ s Guide Press the PWR button to turn the selected component’s power on/of f. If the SA T button is currently selected, pr essing the PWR button turns the T racV ision antenna on/off (but receiver r emains powered in standby).
54-0376 3.5 Using the Remote Control Press the F A V button to view listings for your favorite channels. Y ou can set up four differ ent lists of favorite channels. Each press of the F A V button brings up the next favorite channel list. See Section 6-1, “Using Favorite Channel Lists,” on page 6.
54-0376 3.6 DIRECTV Mobile Receiver/Controller User’ s Guide Press the CLEAR button to exit fr om any onscreen guide, r emove banners, or cancel an action.
CH VOL PWR DVD VCR AUX TV SAT GUIDE MENU INFO CLEAR TURBO FAV MUTE CH PREV DIRECTOR PROG SEARCH AUDIO VIDEO 123 456 789 0 INPUT REW PLAY FF REC STOP PAUSE P A G E O N E L I N E G U I D E S E L E C T 54-0376 3.
54-0376 3.8 DIRECTV Mobile Receiver/Controller User’ s Guide The INPUT button allows you to select a video feed from a dif ferent sour ce connected to your TV , such as a VCR (if the TV component button is selected).
54-0376 3.9 Using the Remote Control 3-2 Programming the Remote Control to Operate Other Components In addition to controlling the mobile r eceiver , you may be able to operate your TV , VCR, DVD, or AUX components using your T racV ision remote control.
54-0376 3.10 DIRECTV Mobile Receiver/Controller User’ s Guide 2. T urn on the receiver you want to contr ol with the remote. 3. Press the MENU button to access the main menu. 4. From the main menu, highlight the System Setup tab and press SELECT . 5.
54-0376 3.11 Using the Remote Control 8. At the same time, press the MUTE button for two seconds. 9. Release both buttons. The SA T button should remain lit. If it doesn’t, r epeat Steps 7-9. 10. Enter the desir ed ID number (between “001” and “008”) using the numeric keypad.
54-0376 4.1 Overview of Onscreen Displays 4 Over view of Onscreen Displays This section introduces the three types of onscreen displays: the Channel Banner , the Program Guide, and the Menu System. Contents 4-1 The Channel Banner . . . . . . . . . . .
54-0376 4.3 Overview of Onscreen Displays 4-1 The Channel Banner Whenever you change channels while you are watching TV , the channel banner appears at the top of the screen. Y ou can also display the channel banner by pressing the INFO button while watching TV .
54-0376 4.4 DIRECTV Mobile Receiver/Controller User’ s Guide 4-2 The Program Guide T o display the program guide, pr ess the GUIDE button. Y ou can also access the program guide from the menu system’s Program Guide tab.
54-0376 4.5 Overview of Onscreen Displays 4-3 The Menu System T o display the main menu, press the MENU button. The menu system gives you access to all system functions and settings.
54-0376 4.6 DIRECTV Mobile Receiver/Controller User’ s Guide T o move the highlight: Use the joystick to move the highlight within the menus. T o select a menu item: Highlight the desired menu item and pr ess the SELECT button to select a main menu item or execute an action.
54-0376 4.7 Overview of Onscreen Displays Main Menu T ab Screens Functions See P age: Program Guide Program Guide • View and modify the prog ram guide 5.1 Guide Options Theme • Filter the program guide b y program category 6.7 Times • Change the time period shown in the program guide 6.
54-0376 4.8 DIRECTV Mobile Receiver/Controller User’ s Guide Main Menu T ab Screens Functions See P age: A udio & Video A udio • Set def ault audio language and alter nate audio language 8.3 • Set left/right audio balance Video • Select screen ratio (4:3 or 16:9) 8.
54-0376 4.9 Overview of Onscreen Displays Main Menu T ab Screens Functions See P age: System Setup Install • Change the list of av ailable satellites 8.11 • Scan the sky f or av ailable satellites • Reload the program guide Signal • View satellite signal strength 8.
54-0376 5.1 Using Program Guides 5 Using Program Guides This section explains how to select a program guide style, use the different guide features, and set guide preferences. Contents 5-1 Program Guide Styles . . . . . . . . . . . . . . . . . . . . .
54-0376 5.3 Using Program Guides 5-1 Program Guide Styles Y ou can set up the program guide to pr esent information using either of two styles: •G r i d • Logo The following sections explain how to select a style and describe the features of each style.
54-0376 5.4 DIRECTV Mobile Receiver/Controller User’ s Guide Grid Guide • Easy to see what programs ar e available at a particular time. • Lists up to seven days of current and upcoming programming. • The program title and description appear above the grid as you highlight each program.
54-0376 5.5 Using Program Guides 5-2 Using the Program Guide T o display the program guide: Press the GUIDE button to bring up the guide. T o move the highlight: Use the joystick to move the highlight within the guide. Move the highlight to the right to show future programming.
54-0376 5.6 DIRECTV Mobile Receiver/Controller User’ s Guide 5-3 Using the OneLine Guide The OneLine Guide, which appears at the bottom of your screen, displays a segment of the pr ogram guide, starting with the currently viewed channel. It displays 1, 2, 3, or 4 rows at a time, based on the current guide pr eferences.
54-0376 5.7 Using Program Guides 5-4 Using T urboT une for Quick Access to Favorite Channels The T urboT une feature gives you quick access to 27 of your favorite channels. Three gr oups of nine of your favorite channels are available as T urbo 1, T urbo 2, and T urbo 3.
54-0376 5.8 DIRECTV Mobile Receiver/Controller User’ s Guide Adding the Current Channel to T urboT une If you want to add the channel you’re curr ently watching to T urboT une, follow the steps below . 1. Press the TURBO button to display the T urboT une guide.
54-0376 5.9 Using Program Guides Renaming T urboT une Groups Y ou can rename each nine-channel T urboT une group to anything you choose, using up to 10 letters, numbers, spaces, etc. For example, T urbo 1 could be renamed “Mom” and T urbo 2 renamed “Dad.
54-0376 5.10 DIRECTV Mobile Receiver/Controller User’ s Guide 3. Highlight the menu button for the setting you wish to modify: Guide Style Press SELECT to choose either grid or logo style of program guide. See Section 5-1, “Pr ogram Guide Styles,” on page 5.
54-0376 5.11 Using Program Guides Filters Press SELECT to choose either temporary or persistent . If temporary , the filters you apply are active only while the program guide r emains onscreen; once you exit the pr ogram guide, all filters are clear ed.
54-0376 6.1 Setting Favorites and Filters 6 Setting Favorites and Filters This section explains how to set up lists of favorite channels, filter the program guide by category and time, and search for programs based on content. Contents 6-1 Using Favorite Channel Lists .
54-0376 6.3 Setting Favorites and Filters 6-1 Using Favorite Channel Lists Favorite channel lists help you organize the hundr eds of available channels into more manageable gr oups. Each of the four lists can contain as many or as few channels as you wish.
54-0376 6.4 DIRECTV Mobile Receiver/Controller User’ s Guide 4. In the desired channel list column, highlight the tag box for the channel that you want to add or remove. Use the joystick or CHANNEL (CH) button to scroll up or down to view other channels.
54-0376 6.5 Setting Favorites and Filters Renaming a Channel List 1. At the Favorite List Setup pane, highlight the Rename button and press SELECT . A Rename List menu appears. Y ou can rename the first three lists. Y ou cannot rename the All or Family lists.
54-0376 6.6 Adding and Removing Channels T o add or delete a channel from a selected favorite channel list, follow the steps below . T o add all available channels to a favorite list: 1. At the Favorite List Setup pane, highlight the Add All button and press SELECT .
54-0376 6.7 6-2 Filtering the Program Guide The Category Filter menu allows you to filter the program guide to show just those channels that match your viewing interests. T o filter the guide by program categories, such as movies, sports, or news, follow the steps below .
54-0376 6.8 DIRECTV Mobile Receiver/Controller User’ s Guide 6-3 Selecting Guide Ti mes The Guide T imes menu provides easy access to future programming information. T o advance the guide to a future day/time period, follow the steps below . 1. Press the GUIDE button twice while watching TV [ or select the Guide Options tab from the main menu].
54-0376 6.9 Setting Favorites and Filters 6-4 Using WatchWizard to Search for Programs W atchW izard allows you to search for pr ograms using criteria such as rating, showtime, language, and category . Y ou can even search for a specific wor d found in program titles or descriptions.
54-0376 6.10 DIRECTV Mobile Receiver/Controller User’ s Guide T o enter text, use the onscreen keyboar d (to enter a letter on the keyboard, highlight the letter and pr ess SELECT). Once you’ve entered the desir ed text, highlight the OK button and press SELECT .
54-0376 6.11 Setting Favorites and Filters Using the Channels Search Y ou can also search for channels that of fer a specific type of programming by using the category-based channels search. 1. Press the SEARCH button while watching TV [ or select the W atchW izard tab from the main menu].
54-0376 7.1 Using Access Controls 7 Using Access Controls This section explains how to lock and unlock the system using a passcode. It also explains how to set rating and time limits. Contents 7-1 Locking & Unlocking the System . . . . . . . . . .
54-0376 7.3 Using Access Controls 7-1 Locking & Unlocking the System Y ou can easily set limits to restrict the viewing of satellite TV programming. When accompanied by the channel lists, these limits provide a gr eat degree of control. When you first install the mobile receiver , it will be unlocked.
54-0376 7.4 DIRECTV Mobile Receiver/Controller User’ s Guide 5. The Lock System pop-up panel appears. Enter a four-digit passcode using the r emote control’s numeric keypad. 6. Highlight the OK button and press SELECT . 7. Enter the code again to confirm, then highlight the OK button and press SELECT .
54-0376 7.5 Using Access Controls Unlocking the System T o remove the lock and all of its r estrictions, follow the steps below . 1. Press the MENU button to access the main menu. 2. Highlight the Lock & Limits tab and press SELECT . 3. Highlight the Lock tab.
54-0376 7.6 DIRECTV Mobile Receiver/Controller User’ s Guide 7-3 Setting Ti me Limits Y ou can restrict your system to allow viewing only during specific hours and/or a maximum number of hours. T o set time limits, follow the steps below . 1. Press the MENU button to access the main menu.
54-0376 7.7 Using Access Controls 4. Highlight the day of the week that you want to limit and press SELECT . 5. a. If you want to limit the maximum number of viewing hours for that day , highlight the T otal T ime button and use the remote control’s numeric keypad to enter the limit.
54-0376 8.1 Other Menu Functions 8 Other Menu Functions This section explains how to change audio/video settings, schedule future programs, and change system settings. Contents 8-1 Adjusting Audio Settings . . . . . . . . . . . . . . . . . . . . . . .
54-0376 8.3 Other Menu Functions 8-1 Adjusting Audio Settings From the Audio Adjustment menu, you can select languages for default audio and alternate audio. Y ou can also adjust the left/right balance. T o set audio prefer ences, follow the steps below .
54-0376 8.4 DIRECTV Mobile Receiver/Controller User’ s Guide T o set up your default and alternate audio languages, follow the steps below . 1. Press the AUDIO button to access the Audio Adjustment menu.
54-0376 8.5 Other Menu Functions 8-2 Adjusting Video Settings From the V ideo Adjustment menu, you can set the screen’s aspect ratio and change the appearance of onscreen displays. T o set video prefer ences, follow the steps below . 1. Press the VIDEO button [ or select the Audio & V ideo tab from the main menu].
54-0376 DIRECTV Mobile Receiver/Controller User’ s Guide 8-3 Using the Program Director to Schedule Future Programs The Program Dir ector allows you to automatically tune to a program at a specific date and time, or tune to a program on a r epeating basis.
54-0376 8.7 Other Menu Functions 4. Highlight the Schedule to V iew button from the Schedule Options pop- up menu and press SELECT . 5. Use the joystick or numeric keypad to choose the desired channel fr om the channel selection pane. Then highlight the OK button and press SELECT .
54-0376 8.8 DIRECTV Mobile Receiver/Controller User’ s Guide Deleting a Scheduled Event T o cancel a scheduled event, follow the steps below . 1. Press the MENU button to access the main menu. 2. Highlight the Program Director tab and press SELECT .
8.9 54-0376 Other Menu Functions Erasing a Message T o permanently remove a message, highlight the Erase button and press SELECT . Messages are automatically deleted as they become outdated or if space is needed for newer incoming messages. 8-5 Setting System Preferences The Prefer ences menu allows you to customize various system settings.
54-0376 8.10 DIRECTV Mobile Receiver/Controller User’ s Guide 4. Highlight the menu button for the setting you wish to modify: Menu Language Press SELECT to choose either English (default) or Spanish for the menu language. The text in all onscreen menus will be shown in the selected language.
54-0376 8.11 Other Menu Functions 8-6 Advanced System Setup Functions Besides the Remote and Prefer ences menus described previously , the System Setup menu provides other functions, all of which are rar ely , if ever , used. T o use the advanced system setup functions, follow the steps below .
54-0376 8.12 DIRECTV Mobile Receiver/Controller User’ s Guide Info The System Information pane lists general information about your mobile receiver , including model, ID, access card, and softwar e version. Features The Features pane lists some of the r eceiver ’s special features.
54-0376 9.1 Antenna Controls 9 Antenna Controls This section explains how to control the T racVision antenna using the receiver’ s onscreen menus. Contents 9-1 Viewing Current Settings . . . . . . . . . . . . . . . . . . . . . . . .9.3 9-2 T urning DewShield On/Off .
9-1 Viewing Current Settings Follow the steps below to view the antenna’s current settings. 1. Press the MENU button to access the main menu. 2. Highlight the System Setup tab and press SELECT . 3. Highlight the Antenna tab. 4. Highlight the Current Settings button and press SELECT .
9-2 T urning DewShield On/Off T racVision R6 Systems Only The DewShield electronic dew elimination system (patent pending) keeps the antenna dome clear of dew , ensuring optimum reception of satellite TV signals (moisture weakens satellite signals). Unless conserving vehicle power is a critical concern, you should leave DewShield set to AUTO.
9-3 T urning the Beeper On/Off The mobile receiver beeps to indicate the status of the antenna. 2 beeps = Antenna is powering on 1 beep = Antenna is powering off If you prefer , you can silence (turn off) the beeper . Follow the steps below if you need to turn the beeper on or off.
9-4 Designating the Receiver as Primar y or Secondary Each mobile receiver/contr oller must be designated as either a primary or a secondary receiver .
5. If you want to designate the receiver as the primary receiver , highlight Set Primary . If you want to designate the receiver as a secondary receiver , highlight Set Secondary . Then press SELECT . ANTENNA Light on Secondary Receivers The ANTENNA light on secondary receivers will remain of f at all times.
9-5 Switching Satellites If your antenna system is configured for multiple satellites, you can easily switch between the available satellites either automatically or manually .
Manual Switching If you prefer , you can switch satellites manually from the Sat Select menu. Follow the steps below to manually switch to a differ ent satellite. 1. Using the primary receiver , press the MENU button to access the main menu. 2. Highlight the System Setup tab and press SELECT .
9-6 Changing the List of Available Satellites If your antenna system supports multiple satellites, you can choose which satellites will be active for your system. Follow the steps below to add or remove satellites from the list of supported satellites.
54-0376 10.1 T roubleshooting 10 T roubleshooting This section identifies basic problems along with their possible causes and solutions. It also explains what the status lights indicate, how to view diagnostic information, and how to get technical support.
10-1 Five Simple Checks If you are experiencing a pr oblem, first check the five simple things below . If none of these are the pr oblem, continue troubleshooting using the r emainder of this section as a guide. Can the antenna see the satellite? The antenna requir es an unobstructed view of the southern sky to receive satellite TV signals.
DIRECTV Mobile Receiver/Controller User’ s Guide S y s tem doe s not p ower o n No video on TV s creen Intermittent p icture for s hort interval s S y s tem work s at re s t, b ut not on the mo ve S.
Blown Fuse The rear panel of the r eceiver includes a fast-blow fuse rated for 8 amps. If this fuse has blown, the system will not operate. Unscrew the cap and r eplace the fuse. If you replace the fuse, but it blows again, check the receiver to ensur e that it is clear of debris and the connectors are tight.
54-0376 10.6 DIRECTV Mobile Receiver/Controller User’ s Guide Loose Cable Connectors A loose connector can reduce the signal quality . Check the cable connections at the antenna unit, receiver , RF converter , audio/video components, and other equipment to ensure they ar e securely attached.
54-0376 T roubleshooting Receiver Lost Activation Information If you can only access the DIRECTV preview channels, such as channel 100, while all other channels show a message to call Ext. 722, and you have already activated the r eceiver , the receiver may have lost its stored activation data.
54-0376 10.8 DIRECTV Mobile Receiver/Controller User’ s Guide Favorite Channel List Active If a favorite channel list is active, only channels set up in that list are accessible. Pr ess the remote contr ol’s F A V button to cycle through the lists.
Ground Loop Generating Electrical Noise The system’s audio cables might pick up the electrical noise or hum caused by a ground loop on the vehicle/vessel. T o eliminate this noise, install a ground loop isolator in-line between the r eceiver ’s “Audio” jacks and your TV’s audio input.
54-0376 10.10 10-4 System Status Lights Three status lights on the fr ont of the mobile receiver indicate the current status of the system and can help you identify problems. During normal operation, all three status lights should be lit green. The following tables explain what the differ ent light conditions indicate.
54-0376 10.11 T roubleshooting Light is... Indicates Description Off Off Antenna is OFF or disconnected, bad power , receiver in Standb y , or receiver set to Secondary Green T racking Antenna is trac.
10-5 Viewing Diagnostic Information Follow the steps below to view diagnostics information on the receiver . 1. Using your primary receiver , press the MENU button to access the main menu. 2. Highlight the System Setup tab and press SELECT . 3. Highlight the Antenna tab.
10-6 Viewing Serial Numbers Follow the steps below to view the system serial numbers. 1. Using your primary receiver , press the MENU button to access the main menu. 2. Highlight the System Setup tab and press SELECT . 3. Highlight the Antenna tab. 4.
10-7 Viewing Software V ersions Follow the steps below to view the system software versions. 1. Using your primary receiver , press the MENU button to access the main menu. 2. Highlight the System Setup tab and press SELECT . 3. Highlight the Antenna tab.
10-8 T echnical Support The T racV ision antenna and mobile receiver/ controller ar e sophisticated electronic devices; only KVH-authorized technicians have the tools and expertise necessary to diagnose and repair a system fault.
54-0376 A.1 Appendices Appendices This section provides wiring diagrams and notes for typical T racVision configurations and maps showing the DIRECTV ® satellites’ elevation angles off the horizon. Contents A System Wiring Diagrams . . . . . . . . .
54-0376 System Wiring Diagrams Appendix A System Wiring Diagrams The diagrams on the following pages show how to wire the system for various configurations: Original KVH mobile receiver/controller* AND: Requires P ar t #: P age: No additional receivers N/A A.
54-0376 A.4 DIRECTV Mobile Receiver/Controller User’ s Guide CAUTION This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device must not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Single Mobile Receiver/Controller Audio/Video Connections • T o connect the receiver/contr oller to the TV’s video input, you can choose either of the following options: Option 1 - RCA-type jack O.
DIRECTV Mobile Receiver/Controller User’ s Guide 54-0376 A.6 CAUTION This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device must not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
T wo Mobile Receiver/Controllers Components Required • Splitter Kit, KVH P/N 72-0177 • (T racV ision M3/M2 only) A Splitter Kit is included in the Extra Receiver Kit (P/N 01-0288-01). • The special DC block (40V) splitter included in the Splitter Kit permits communications between the antenna and the primary receiver/contr oller .
CAUTION This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device must not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Three Mobile Receiver/Controllers Components Required • T wo Splitter Kits, KVH P/N 72-0177 • (T racV ision M3/M2 only) A Splitter Kit is included in the Extra Receiver Kit (P/N 01-0288-01). • The special DC block (40V) splitter included in the Splitter Kit permits communications between the antenna and the primary receiver/contr oller .
CAUTION This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device must not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
One Mobile Receiver/Controller and One Standard-Def Home Receiver Components Required • Splitter Kit, KVH P/N 72-0177 • Destacker , Single-output, KVH P/N 19-0347 • The special DC block (40V) splitter included in the Splitter Kit permits communications between the antenna and the primary receiver/contr oller .
CAUTION This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device must not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
One Mobile Receiver/Controller and T wo Standard-Def Home Receivers Components Required • Splitter Kit, KVH P/N 72-0177 • Destacker , Dual-output, KVH P/N 19-0410 • The special DC block (40V) splitter included in the Splitter Kit permits communications between the antenna and the primary receiver/contr oller .
CAUTION This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device must not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
T wo Mobile Receiver/Controllers and One Standard-Def Home Receiver Components Required • T wo Splitter Kits, KVH P/N 72-0177 • (T racV ision M3/M2 only) A Splitter Kit is included in the Extra Receiver Kit (P/N 01-0288-01).
CAUTION This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device must not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
One Mobile Receiver/Controller and One Standard-Def DVR Components Required • Splitter Kit, KVH P/N 72-0177 • Destacker , Dual-output, KVH P/N 19-0410 • The special DC block (40V) splitter included in the Splitter Kit permits communications between the antenna and the primary receiver/contr oller .
CAUTION This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device must not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
One Mobile Receiver/Controller , One Standard- Def Home Receiver , and One Standard-Def DVR Components Required • Splitter Kit, KVH P/N 72-0177 • Destacker , Dual-output, KVH P/N 19-0410 • Multi.
CAUTION This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device must not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
T wo Mobile Receiver/Controllers and One Standard-Def DVR Components Required • T wo Splitter Kits, KVH P/N 72-0177 • (T racV ision M3/M2 only) A Splitter Kit is included in the Extra Receiver Kit (P/N 01-0288-01).
Appendix B Elevation Maps A.23 Elevation Maps 30 30 35 35 40 45 50 55 55 50 45 40 Satellite at Equator 54-0376 Elevation Map for Satellite 101.
54-0376 A.24 DIRECTV Mobile Receiver/Controller User’ s Guide 30 35 35 40 45 50 55 55 50 45 40 Satellite at Equator 25 Elevation Map for Satellite 110.
54-0376 A.25 Elevation Maps 30 35 35 40 45 50 50 45 40 Satellite at Equator 25 20 Elevation Map for Satellite 119.
54-0376 A.26 DIRECTV Mobile Receiver/Controller User’ s Guide Elevation Map for Satellite 72.5 30 35 55 45 40 50 55 Satellite at Equator 25 25 30 35 40 45 50 20 20.
Index A access card, 8.12 accessories, A.3 A C/DC power supply , A.5 activate receiv er, 10.6 adjust audio settings, 8.3-8.4 adjust video settings, 8.5 advanced setup , 8.11-8.12 amperage, fuse , 10.5 Antenna light, 9.7, 10.10-10.11 antenna unit connect to receiver , A.
connecting additional receivers , A.3- A.21 connecting a D VR, A.16-A.21 connectors, receiv er , A.4 control multiple receiv ers, 3.10-3.11 control other components, 3.9 cov erage area, 1.5, 10.6 cross talk, 3.10 D da ylight saving, 8.10 def ault settings, 8.
I ice on antenna, 10.6 icons, channel banner , 4.3 icons, menu, 4.5 INFO button, 3.5 initialize a ne w access card, 8.12 INPUT button, 3.8, 10.7 install batteries, 3.11 interf erence, remote controls, 3.10 IR ey e, 3.9 J jo ystick, 3.5 K ke yboard, 6.
P par t numbers, accessories, A.3 passcode, 7.4 picture-in-guide, 4.4, 5.10 power indications , 10.10, 10.12 power input, 10.5, A.4-A.5 power s witch, receiver , 2.3, 10.5 power off the system, 2.5 power on the system, 2.3-2.4 power supply , A.5 pref erences, system, 8.
remote control ID , change, 3.10-3.11 repairs, 10.9 replace batteries, 3.11 reset system, 10.3 RF conv er ter connect to receiver , A.4 description, 1.4 distance from receiver , 10.8, A.5 RF le vel, 10.12 RF modulator , A.5 S S-Video , A.5 saf ety warning, 3.
troubleshoot, 10.1 troubleshooting matrix, 10.4 TURBO button, 3.4 T urboT une, 5.7-5.9 turn beeper on/off, 9.5 turn DewShield on/off, 9.4 turn off the system, 2.5 turn on the system, 2.3-2.4 TV control, 3.6, 3.9 U unlock the system, 7.5 unstack ed signal, A.
KVH Industries, Inc. • 50 Enterprise Center • Middletown, RI 02842-5279 U.S.A . • Phone: (401) 847-3327 • Fax: (401) 849-0045 • E-mail: info@kvh.com www .kvh.com © Copyright 2006-2007, KVH Industries, Inc. DIRECTV is a registered trademark of DIRECTV , Inc.
Ein wichtiger Punkt beim Kauf des Geräts ASA Electronics TVR6 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie ASA Electronics TVR6 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für ASA Electronics TVR6 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von ASA Electronics TVR6 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über ASA Electronics TVR6 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon ASA Electronics TVR6 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von ASA Electronics TVR6 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit ASA Electronics TVR6. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei ASA Electronics TVR6 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
