Benutzeranleitung / Produktwartung D60425-06 des Produzenten MPI Technologies
Zur Seite of 33
Host Print Set-up Guide D60425-0 6 November 2007 MPI Tech A/S Vadstrupvej 35 2880 Bagsvaerd Denmark Tel: +45 44 36 60 00 Fax: +45 44 36 61 11 www.mpitech.
Table of contents 1 PSF/MVS AFP Printing Using TCP/IP .................................................. 3 1.1 PSF/MVS direct attachment .............................................................. 3 1.2 PSF/MVS start-up proc edure .................
1 PSF/MVS AFP Printing Using TCP/IP This chapter provides information on h ow to create MVS definitions for printing from PSF/MVS via TCP/IP. T he fo llowing topics are addressed: JES printer statemen.
//PRT420 CNTL //PRT420 PRINTDEV FONTDD=*.FONT01, /* FONT LIBRARY DD */ // OVLYDD=*.OLAY01, /* OVERLAY LIBRARY DD */ // PSEGDD=*.PSEG01, /* SEGMENT LIBRARY DD */ // PDEFDD=*.PDEF01, /* PAGEDEF LIBRARY DD */ // FDEFDD=*.FDEF01, /* FORMDEF LIBRARY DD */ // JOBHDR=*.
2 z/OS SCS Printing Using TN3270e This chapter provides examples of ho w to set up SCS printing using TN3270e. 2.1 TN3270E Setup using z/OS Communication Server The IBM z/OS is capable of supporting TN32 70e sessions comm unic ating directly. The following describes the requi red mainframe definitions for a Lin kCom or DocOut.
3 Mainframe Printing Using SNA This chapter provides: Note: The descriptions below ap pear in Et hernet and Toke n Ring versions respectively, and the sections are marked accordingl y. Be sure to select the right section . • sample LU1 printer logmode definitions: 3.
3.2 Ethernet - PS PU definition for 3174 Sample definition for installation in association with a lo cally attached 3174. 3174 VTAM definiti on V1SNA1C2 VBUILD TYPE=LOCAL * * LOCAL SNA 3174 * V1LS1C2 .
PrintServer Definition file extract &&??##N1,0# ; Start of file - Don't remove this ! ;------------------------------------------------------------------------ ; Configuration for the Ethernet PrintServer ; (This is an example. Please modify the parameters to match ; your configuration).
PU/LU Definitions SPPRKEN VBUILD TYPE=SWNET, SWITCHED MAJOR NODE MAXNO=1, MAXGRP=1 * STATOPT=‘NN PRINTER’ PA01B91 PU ADDR=C1, IDBLK=017, IDNUM=E2961, DISCNT=NO, MAXOUT=1, MAXDATA=1033, MODETAB=MTA.
3.4 Token Ring - PS PU definition for 3174 Sample definition for installation in association with a lo cally attached 3174. 3174 VTAM definiti on V1SNA1C2 VBUILD TYPE=LOCAL * * LOCAL SNA 3174 * V1LS1C.
PrintServer Definition file extract &&??##N1,0# ; Start of file - Don't remove this ! ;------------------------------------------------------------------------ ; Configuration for the Token Ring PrintServer ; (This is an example. Please modify the parameters to match ; your configuration).
PU/LU Definitions SPPRKEN VBUILD TYPE=SWNET, SWITCHED MAJOR NODE MAXNO=1, MAXGRP=1 * STATOPT=‘NN PRINTER’ PA01B91 PU ADDR=C1, IDBLK=017, IDNUM=E2961, DISCNT=NO, MAXOUT=1, MAXDATA=1033, MODETAB=MTA.
4 Configuration of MS SNA/ HIS Server This chapter provides examples of ho w to set up SCS printing using TN3270e. 4.1 General setup 4.1.1 Adding DLC 802.
4.1.2 SNA Server confi guration – Create a link You must define the Server LAN card to be used to communicate wi th the host. - Folder Link Services , make a right cli ck and select Link Service. Select DL C 802.2 Link Service from the list. - In the DLC 802.
Connections : General Connections : Address Note : Remote Network Address must match the Ho st MAC Address (TIC) 15.
Connections : System Identification Note : local Node ID must match the ID_NUM and ID_BLOCK parameters of the VTAM PU Definition Connections : System Identification Note : MAX BTU Le ngth must match t.
4.2 SNA Server configuration – Create a Printer LU Attached to the connection, you must create yo ur pri nter LU. In order to run with MPI Router, you must define a LUA LU.
4.3 Configuring BlueServer for SNA communication 4.3.1 Setup Connection tab Notes: - The other tabs “IPDS Settings”, “Paper C ontrols”, are not used in t his case.
4.4 Loading the Router Mainframe and Parser 4.4.1 Microsoft SNA/HI S status indication The PSNA201 is SSCP 4.4.2 Blue Server status indication With this configuration, you are now able to p rint SCS or IPDS jobs from your Mainframe IBM host.
4.5 Configuring DocOut for SNA communication 4.5.1 Setup LUA(LU1) tab Select AFP/IPDS (PSF) using SNA (LU1/LUA) or SCS (S/390) using SNA (LU1/LUA) Check Confi guration: Select: Save Configurat ion 20.
4.5.2 Microsoft SNA/HI S status indication The PSNA201 is SSCP 4.5.3 DocOut status indication With this configuratio n, you are now able to print SCS or I PDS jobs from your Mainframe IBM host.
5 PSF/AIX IPDS Printing Using TCP/IP This chapter provides details on: Adding a TCP/IP attached printer Set up of the KEEPA LIVE TCP/IP fe ature The basic TCP/IP installation of the Prin tServer (IPDS) must be completed before direct AFP / IPDS from PS F/AIX will be possible.
5.3 AIX KEEPALIVE support The no (network options) command can be used by the root user to configure KEEPALIVE frequencies. no -o tcp_keepid le=nnn no -o tcp_keepintvl=nnn when nnn is in half- s econ ds.
6 PSF/400 AFP Printing Using TCP/IP This chapter provides configuration gu idelines for AS/400 IPDS Printing over TCI/IP. These guidelines ar e applicable for OS/400 version 3.7, 4.X and 5.X. The examples of completed screens given are for OS/400 version 4.
A completed PSF Configur at ion looks like this: PSF Configuration Information Page 1 PSF configuration: NETWRKPRT Library: AFP User resource library . . . . . . . . . . . . . : *JOBLIBL IPDS pass through . . . . . . . . . . . . . . . : *YES Activate release timer.
Display Device Description Page 1 5716SS1 V4R4M0 981108 BLDRB1 09/11/98 12:02:59 Device description . . . . . . . . : DEVD < DeviceName > Option . . . . . . . . . . . . . . : OPTION *ALL Category of device . . . . . . . . : *PRT Device class . .
7 SCS/DCA Printing Using TN5250e To set up TN5250, configure your PrintS erver using PrintGuide (see the manual Getting Started with PrintGuide , doc. no. 60364 on the Utility Pack). Start PrintGuide, select Telnet Pri nt Settings (Figure 7), select TN5250e as Connection Type and enter the Device N ame for your <Pri ntServer>.
Prerequisites: • AS/400 is configured and running TCP/IP • Firmware level* on the inte rface is at least S80 xxx.360 • Release of PrintGuide* being used is at least S42 065.100 * Latest versions can be obtain ed from the MPI Tech web page 1. Install the Prin t Server using Print Guide.
3. Double-click on the highlighted session. 29.
Type in the Device N ame . This must be a unique name o n the AS/400 that you wish to connect to . It can have up to 10 characters. Type in the Host IP Address of the AS/400 you wi sh to connect to. The standard Telnet port 23 is used for the Host Port and is predefined.
The value of CTL should match the virtual controller on the system (Normally QVIRCD0001) The value for TEXT is optional. Create Device Desc (Printer) (CRTDEVPRT) Type choices, press Enter. Device description . . . . . . . DEVD > DEVXXXX Device class .
8 AS/400 Printing using TCP/IP LPR/LPD This chapter provides: AS/400 definitions Once these parameters have been configur ed, and the basic TCP/IP installation of the PrintServer ha s been complet ed, printing from AS/400 will be possible.
The value *IP must be used for CNNTYPE The value *OTHER must be used for DESTTYPE The value *YES must be used for TRANSFORM The value used for MRFTYPMDL will depend on the attached printer. Use the ‘F4’ to obtain a list of the possible choices The value used for INTNETADR must be th e sa me as the IP address of your PrintServer.
Ein wichtiger Punkt beim Kauf des Geräts MPI Technologies D60425-06 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie MPI Technologies D60425-06 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für MPI Technologies D60425-06 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von MPI Technologies D60425-06 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über MPI Technologies D60425-06 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon MPI Technologies D60425-06 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von MPI Technologies D60425-06 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit MPI Technologies D60425-06. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei MPI Technologies D60425-06 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.