Benutzeranleitung / Produktwartung MH65-M2 des Produzenten Moyer Diebel
Zur Seite of 51
T echnical Manual F or machines be ginning with Serial No. W8100 Model Hood-T ype Dishwasher Moy er Diebel Ltd. September , 2003 Manual P/N 113647 MH65-M2 High T emperature with Built-in Booster Machine Serial No . Simply Engineered Better P . O. Box 4149 Winston-Salem, North Car olina 27115-4149 336/661-1556 F ax: 336/661-1660 2674 N.
Complete the infor ma tion below f or quick reference. Model Number Serial Number V oltage and Phase Moyer Diebel Parts Supplier Phone Moyer Diebel Service Agenc y Phone Note: W hen calling to order parts, be sure to hav e the model number , serial number , voltage and phase of your machine.
i REVISION RECORD Revision Revised Serial Number Comments Date Pages Effectivity 7/3/03 All W8100 First issue of manual and replacement parts lists REVISION RECORD.
ii REVISION RECORD R e vision Recor d (CONT .).
iii LIMITED W ARRANTY Limited W ar ranty Moyer Diebel, P.O. Box 4183, Winston-Salem, North Carolina 27115, and P. O. Box 301, 2674 North Service Road, Jordan Station, Ontario, Canada L0R 1S0 warrants machines, and parts, as set out below.
iv FOREW ORD 1. Read the instructions in this manual carefully . It contains important information on installation, operation, and safety . 2. Store this manual carefully for future reference. 3. After remo ving packing material, check for loose parts in dishracks.
Revision Record ........................................................................................................... i Limited W arranty ......................................................................................................... iii Fore ward .
vi T his Page Intentionall y Left Blank P ar t 1: INST ALLA TION AND MAINTENANCE.
1 INTRODUCTION INTRODUCTION W elcome to Moyer Diebel ... and thank you for allo wing us to take care of your dishw ashing needs. This manual cov ers the hood-type dishwasher model MH-65. Y our machine was completely assembled , inspected and thoroughly tested at our factory before it was shipped to your installation site.
2 GENERAL MODEL NUMBERS MH-65 The MH-65 model is a high temperature (180°F/82°C rinse) sanitizing model with booster . S tandard Equipment Includes: • Quick 65 second cycle • 1.
3 Auto/Manual Switch Manual Cycle Start(UP) Auto Manual Switch Door Activated Cycle (DOWN) Selector Switch Extended W ash Manual Start Switch Machine Ready Heater OFF Light (Only on S/N W8100-W8135) (.
4 ! P ar t 1: OPERA TION P ART 1: OPERA TION (CONT .) OPERA TION AND USE (CONT .) 7. Remove the rack at a slight incline to permit all the w ater to drain; allow dishw are to dry . After washing one’ s hands, handle the rack in such a manner as not to touch the dishware inside, then place the rack on hygienically clean shelves.
5 MAINTENANCE: IMPORT ANT : Before carrying out the cleaning and maintenance operations, turn of f the main discon- nect switch for the equipment. Frequently check and clean the nozzles. Blocked nozzles will pre vent the machine from cleaning properly .
6 P ART 1: OPERA TION (CONT .) OPERA TION AND USE (CONT .) SANITIZING THE MACHINE Sanitizing the machine at least once a week is of the utmost importance in order to guarantee hygiene, e ven when the machine is not in use. It is advisable to use a disinfecting product suggested by an authorized detergent dealer .
7 Auto/Manual Switch Manual Cycle Start(UP) Auto Manual Switch Door Activated Cycle (DOWN) Selector Switch Extended W ash Manual Start Switch Machine Ready Heater OFF Light In Cycle Light Cycle Selection Short - 65 Seconds Medium-120 Seconds Long -180 Seconds OFF Position (Only on S/N W8100-W8135) PART 1: OPERA TION Figure 1.
8 P ART 2: INST ALLA TION AND MAINTENANCE INST ALLA TION AND MAINTENANCE INSTRUCTIONS The following instructions are addressed to qualif ied personnel.
9 ! P ART 2: INST ALLA TION AND MAINTENANCE (CONT .) Drain connections 1. The MH65 model is a gravity drain machine equipped with a 1-3/8" O.D. tailpiece and a 6 foot long 1" I.D. hose. 2. The maximum drain flow rate is 15 gallons/min-56.8 litres/min.
10 T his Pa ge Intentionall y Left Blank.
11 P ar t 3: REPLA CEMENT P A RTS PA R T 3 : REPLA CEMENT PA R T S.
12 P ar t 3: REPLACEMENT P AR TS Figure 3.1- Hood and T ank 1 2 1 B 4 A A A 7 3 5 6 6.
13 P ar t 3: REPLA CEMENT P A RTS HOOD AND TANK Fig. 3.1 Part Item No. No. Part Description Qty 1 C351421 Panel, Side ..................................................................................... 2 2 C351835 Panel Front .......................
14 P ar t 3: REPLACEMENT P AR TS Figure 3.2- Door Handle and Springs For handle connections see Figure 3.3 B 1 2 3 2 1 4 5 7 6 A.
15 P ar t 3: REPLA CEMENT P A RTS DOOR HANDLE AND SPRINGS Fig. 3.2 Part Item No. No. Part Description Qty 1 107398-1 Door Lift Block ............................................................................. 2 2 107398-2 Door Lift Block Roller ....
16 P ar t 3: REPLACEMENT P AR TS Figure 3.3- Door Switch and Block A Detail A 10 11 14 9 7 6 5 4 3 2 2 1 11 7 16 6 16 XX 15 13 12.
17 P ar t 3: REPLA CEMENT P A RTS DOOR SWITCH AND BLOCKS Fig. 3.3 Part Item No. No. Part Description Qty 1 108442 Bolt M5 x 15mm Filister Head ..................................................... 2 2 W asher ...... ...................................
18 P ar t 3: REPLACEMENT P AR TS Figure 3.4- T racks and Screens 2 1 3 *See Note on Parts.
19 P ar t 3: REPLA CEMENT P A RTS HOOD AND TANK Fig. 3.4 Part Item No. No. Part Description Qty * 1 C530238 Track Assembly ............................................................................. 1 2 C332091sx Left Screen ........................
20 P ar t 3: REPLACEMENT P AR TS Figure 3.5- W ash and Rinse Spray Arms 2 5 6 7 8 2 5 7 12 6 7 7 12 11 9 10 10 9 11 4 3 4 3 1 8 1 13.
21 P ar t 3: REPLA CEMENT P A RTS WASH AND RINSE SPRA Y ARMS Fig. 3.5 Part Item No. No. Part Description Qty 1 C191075 W asher ...... ..................................................................................... 2 2 C420573 W ash Arm (Minus Items 1, 3-5) .
22 P ar t 3: REPLACEMENT P AR TS Figure 3.6- W ash T ank Components 13 12 10 6 5 1 2 3 9 8 7 14 15.
23 P ar t 3: REPLA CEMENT P A RTS WASH TANK COMPONENTS Fig. 3.6 Part Item No. No. Part Description Qty 1 109985 O-ring, Heater ............................................................................... 1 2 C110226 Heater Element W ash T ank 3KW 230V .
24 P ar t 3: REPLACEMENT P AR TS Figure 3.7- Drain Assembly TO MOTOR PUMP DRAIN OUT T o Drain Out 1 3 4 5 6 9 11 12 11 2 10 7 6.
25 P ar t 3: REPLA CEMENT P A RTS DRAIN ASSEMBL Y Fig. 3.7 Part Item No. No. Part Description Qty 1 C180729 T ube, Ov erflow ............................................................................. 1 2 C200950 Seal, Overflo w T ube ..............
26 P ar t 3: REPLACEMENT P AR TS Figure 3.8- W ash and Rinse Piping 5 4 3 MACHINE BACK A 1 14 4 5 3 15 2 MACHINE BACK 6 5 7 5 6 8 9 10 11 12 13 T o Booster 16 13 13.
27 P ar t 3: REPLA CEMENT P A RTS WASH AND RINSE PIPING Fig. 3.8 Part Item No. No. Part Description Qty 1 C190227 Spindle .......................................................................................... 2 2 C332526 Rinse T ube ..............
28 P ar t 3: REPLACEMENT P AR TS Figure 3.9- W ash PumpAssembly 1 2 3 4 5 6 7 A A.
29 P ar t 3: REPLA CEMENT P A RTS WASH PUMP ASSMEBL Y Fig. 3.9 Part Item No. No. Part Description Qty 1 109651 Pump V olute .................................................................................. 1 2 109653 Pump Oring ......................
30 P ar t 3: REPLACEMENT P AR TS 6 5 4 1 3 2 A BASE 6 7 7 W ater Inlet W ater T o Final Rinse 8 B Figure 3.10- Booster Assembly.
31 P ar t 3: REPLA CEMENT P A RTS BOOSTER ASSEMBL Y Fig. 3.10 Part Item No. No. Part Description Qty 1 109985 Seal, Electric Element ................................................................... 1 2 C322821 Element Cover ........................
32 P ar t 3: REPLACEMENT P AR TS 4 5 2 1 3 4 5 9 5 8 7 6 6 10 16 15 14 13 12 A 11 T o Booster T ank Base Figure 3.11- W ater Inlet Piping.
33 P ar t 3: REPLA CEMENT P A RTS WA TER INLET PIPING Fig. 3.11 Part Item No. No. Part Description Qty 1 100500 V acuum Breaker 1/2" .................................................................... 1 2 108349 Repair Kit 1/2" ............
34 P ar t 3: REPLACEMENT P AR TS 9 8 7 10 6 12 11 13 12 11 2 3 1 4 5 W ash Rinse A Figure 3.12- Control Panel.
35 P ar t 3: REPLA CEMENT P A RTS CONTR OL PANEL Fig. 3.12 Part Item No. No. Part Description Qty 1 C120713 Selector Switch ............................................................................. 1 2 C290821 Spacer , Selector Switch ............
36 P ar t 3: REPLACEMENT P AR TS 1 3 3 7 6 16 9 6 4 4 2 19 5 11 12 8 10 1 3 1 5 18 17 1 4 Figure 3.13- Control Cabinet.
37 P ar t 3: REPLA CEMENT P A RTS CONTR OL CABINET Fig. 3.13 Part Item No. No. Part Description Qty 1 C121288 T imer Assembly Complete ........................................................... 1 2 C120501 Thermostat T ank ...........................
38 P ar t 3: REPLACEMENT P AR TS T his Pa ge Intentionally Left Blank P ar t 4: ELECTRICAL SCHEMA TICS.
39 P ar t 3: REPLA CEMENT P A RTS P ar t 4: ELECTRICAL SCHEMA TICS PA R T 4 : ELECTRICAL SCHEMA TICS.
40 P ar t 3: REPLACEMENT P AR TS T his Pa ge Intentionally Left Blank P ar t 4: ELECTRICAL SCHEMA TICS.
SGOCC. MAIN ROTARY SWITCH LINE SHORT CYCLE MEDIUM CYCLE 5 4 3 2 1 3° 2° 1° 0 LONG CYCLE POSITION: D3 D3a(F) D3a(E) D3(D) D3(C) D3(B) D3(A) 0 WASH PUMP OVERLOAD RELAY RINSE WASH 152 SEC D3a ~ SPEED .
SGOCC. MAIN ROTARY SWITCH LINE SHORT CYCLE MEDIUM CYCLE 5 4 3 2 1 3° 2° 1° 0 LONG CYCLE POSITION: D3 D3a(F) D3a(E) D3(D) D3(C) D3(B) D3(A) 0 WASH PUMP OVERLOAD RELAY RINSE WASH 152 SEC D3a ~ SPEED .
42 REPLACEMENT P ARTS.
Ein wichtiger Punkt beim Kauf des Geräts Moyer Diebel MH65-M2 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Moyer Diebel MH65-M2 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Moyer Diebel MH65-M2 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Moyer Diebel MH65-M2 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Moyer Diebel MH65-M2 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Moyer Diebel MH65-M2 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Moyer Diebel MH65-M2 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Moyer Diebel MH65-M2. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Moyer Diebel MH65-M2 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.