Benutzeranleitung / Produktwartung UC-8416 des Produzenten Moxa
Zur Seite of 29
UC-8410/8416/8418 Hardware User ’ s Manual Second Edition, September 2009 www .moxa.com/product © 2009 Moxa Inc. All righ ts reserved. Reproducti on without perm ission is pr ohibited.
UC-8410/8416/8418 Hardware User’s Manual The hardware described in t his manual is furnished under a license agreement and m ay be used only in accordance with the term s of that agreement. Copyright Notice Copyright © 2009 Moxa Inc. All rights reserved.
Table of Contents Chapter 1 Introduction .................................................................................................. 1-1 Overview ..................................................................................................
1 1 Chapter 1 Introduction Thank you for pur chasing the Moxa UC-8410 /8416/8418 RISC-based ready-to-run embedd ed computer . The UC-841 0/8416/8 418 feature 8 RS-232/ 422/485 serial ports, 3 1 0/100 Mbps Ethernet p orts, digital inp ut and di gital output channels, s witching po rts, and C ompactFlash a nd USB por ts for adding additional memory .
UC-8410/8416/8418 Hardware User’s Manual Introduction Overview The UC-841 0/8416/8 418 features 8 RS-232/ 422/485 se rial ports, 3 10/100 Mbps Et hernet po rts, 4 digital i nput channel s and 4 di g.
UC-8410/8416/8418 Hardware User’s Manual Introduction Product Hardware Specifications Computer CPU: Intel XScale IXP435 533 MHz OS (pre-insta lled): Linux DRAM: Onboard 256 MB DDR2 SDRAM, suppor t D.
UC-8410/8416/8418 Hardware User’s Manual Introduction 1-4 Connector T ype: 10-pin scre w termi nal block (4 poi nts, GND) Isolation: 3 KV optical isol ation LEDs System: Power x 1, Ready x 1, Storag.
2 2 Chapter 2 Appearance and Dimensions The following topics are covered in this chapter: Appearance Dimensions Hardware Block Diagrams LED Indicators Reset Button Real Time Cl.
UC-8410/8416/8418 Hardware User’s Manual Appearance and Dimensions Appearance UC-8410 Rear V iew 10/100 Mbps Ethernet x 3 DI Channel x 4 DO Channel x 4 Power Input 12 to 48 VDC LED Indicators (Power, SRAM Battery, Ready, Storage) UC-8410 T op V ie w UC-8410 Front V ie w Reset Button Serial Port x 8, RJ45 (RS-232/422/485) USB 2.
UC-8410/8416/8418 Hardware User’s Manual Appearance and Dimensions UC-8416 Rear V iew 10/100 Mbps Ethernet x 3 DO Channel x 4 Power Input 12 to 48 VDC LED Indicators (Power, SRAM Battery, Ready, Sto.
UC-8410/8416/8418 Hardware User’s Manual Appearance and Dimensions UC-8418 Rear V iew DI Channel x 8 DO Channels x 8 10/100 Mbps Ethernet x 3 DO Channel x 4 Power Input 12 to 48 VDC LED Indicators (Power, SRAM Battery, Ready, Storage) DI Channel x 4 UC-8418 T op V ie w UC-8418 UC-8418 Front V ie w Serial Port x 8, RJ45 (RS-232/422/485) USB 2.
UC-8410/8416/8418 Hardware User’s Manual Appearance and Dimensions Dimensions UC-8410 200 mm 45.3 mm 120 mm 36.5 mm (Unit=mm) 2-5.
UC-8410/8416/8418 Hardware User’s Manual Appearance and Dimensions UC-8416 120.20 70 200 214 228 25.10 59.50 56.50 (Unit=mm) 2-6.
UC-8410/8416/8418 Hardware User’s Manual Appearance and Dimensions UC-8418 120.20 70 200 214 228 25.10 56.50 59.50 (Unit=mm) 2-7.
UC-8410/8416/8418 Hardware User’s Manual Appearance and Dimensions Hardware Block Diagrams The following block diagr am shows the layout of the UC-84 10/8416/8418’ s internal components.
UC-8410/8416/8418 Hardware User’s Manual Appearance and Dimensions UC-8418 Console PHY PHY PCI Bus RTC Decoder 1 2 3 4 5 6 7 8 Moxa UART ASIC USB Hosts XScale IXP435 533 MHz 16 MB NOR Flash 32 MB NA.
UC-8410/8416/8418 Hardware User’s Manual Appearance and Dimensions Reset Button The button labeled Reset returns the UC-84 10/8416/8 418 to its fact ory defaul t config uration. Press the Reset button continu ously for at least 5 seconds to load the factory de fault configuration .
3 3 Chapter 3 Mounting Options The following topics are covered in this chapter: Wall or Cabinet Mounting DIN-Rail Mounting.
UC-8410/8416/8418 Hardware User’s Manual Mounting Options Wall or Cabinet Mounting The two metal brackets that co me standard with the UC-8410 /8416/8418 are used to attach th e UC-8410/8416/8418 to a wall or the inside of a cabinet. First, use two screws per bracket to attach the brackets to the botto m of the UC-8410/8416/841 8 (Fig.
UC-8410/8416/8418 Hardware User’s Manual Mounting Options DIN-Rail Mounting An alumi num DIN-Rai l attachm ent pl ate is included with the product. If you need to reattach the DIN-Rail attachment plate to the UC-8410/8416/8418, make sure the stiff metal spring is situated towards the top, as shown in the following figures.
4 4 Chapter 4 Hardware Connection Description This section de scribes how to connect the U C-8410/8416/ 8418 to seri al devices for fi rst time testing purp oses.
UC-8410/8416/8418 Hardware User’s Ma nual Hardware Connection Description Wiring Requirements ATTENTION Safety First! Be sure to disconnect th e power cord before installin g and/or wiring your UC-8410/8416/8418. Wiring Caution! Calculate the maximum poss ible current in each power wire and common wire.
UC-8410/8416/8418 Hardware User’s Ma nual Hardware Connection Description Grounding the UC-8410/8416/8418 Grounding and wire rou ting help limit the eff ects of noise due to el ectromagnetic interference (EMI). Run the ground connection from the grou nd screw t o the grounding surface prior to connecting devices.
UC-8410/8416/8418 Hardware User’s Ma nual Hardware Connection Description 8 1 The UC-8416 has 8 10/ 100 Mbps swit ch ports. The LED indicators and pin assignments are e xactly the same as the Ethernet ports. Connecting to a Serial Device Use properly wired se rial cables to connect the UC-8410/8416/8418 to serial de vices.
UC-8410/8416/8418 Hardware User’s Ma nual Hardware Connection Description Connecting to the Console Port The UC-841 0/8416/8 418’ s console port i s a 4-pin pin header RS -232 port . Refer to t he following figure for c onsole port cable pin assi gnments.
UC-8410/8416/8418 Hardware User’s Ma nual Hardware Connection Description CompactFlash The UC-8410/ 8416/8418 p rovides one CompactFlash slot that su pp orts CompactFlash type I/II card expansion . Currently , Moxa provi des a Compact Flash card for storage expansion.
UC-8410/8416/8418 Hardware User’s Ma nual Hardware Connection Description If you need device drive rs for other kinds of mass storage ca rds, contact Moxa for inf ormation o n how to initiate a cooperative development project. USB The UC-8410/ 8416/8418 p rovides two USB 2.
UC-8410/8416/8418 Hardware User’s Ma nual Hardware Connection Description Wet Contact Note: If are using wet contacts, you mus t connect “COM” to power .
A A Appendix A Regulatory Approval Statements This device co mpli conditions: (1) This es with part 15 of the FC C Rules. Operation is subject to the fo llowing two device may not cause ha rmfu l interference, and (2) this de vice must accept any interference received, incl uding interf erence that m ay cause undesired operation.
Ein wichtiger Punkt beim Kauf des Geräts Moxa UC-8416 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Moxa UC-8416 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Moxa UC-8416 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Moxa UC-8416 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Moxa UC-8416 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Moxa UC-8416 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Moxa UC-8416 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Moxa UC-8416. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Moxa UC-8416 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
