Benutzeranleitung / Produktwartung WUG2660 des Produzenten Abocom
Zur Seite of 35
802.11b+g Wireless LAN USB Adapter User’s Manual.
REGULATORY STATEMENTS FCC Certification The United States F ederal Comm unication Commission (FCC) and the Canadian Department of Communicati ons have established certain rules governing the use of electron ic equipment. Part15, Class B This device complies with Part 15 of FCC rules.
Table of Contents INTRODUCTION ...................................................................................................1 F EATURES .............................................................................................................
- 1 - INTRODUCTION The 802.11b+g Wireless LAN USB Adapter is designed for a USB ty pe A port of a laptop or desktop computer for creating a wireless workstation . It is USB 2.0 compliant which connects to any available USB port on a notebook or desktop computer.
- 2 - SOFTWARE INSTALLATION Step 1: Install the Driver & Utility For Windows 98, 2000, ME and XP users Caution ! Do not insert the wireless LAN adapter in to your computer until the procedures in “ Install the Driver& Utility” have been performed.
3. Whe n the Welc ome screen appea rs, click Next to continue. 4. The i nstallation program will start running automatically. Fo llow the on-screen instruction to proceed .
- 4 -.
- 5 - HARDWARE INSTALLATION Windows 2000/XP Note : Before you install the device to your computer, make sure you have install ed the driver and utility as d escr ibed in the pr evio us section. Windows XP 1. Locate your USB host and insert the USB Adapter.
- 6 - 4. Click Continue Anywa y → Finish to complete the hardware installation. Windows 200 0 Insert the USB adapter into the USB port of you r computer and th en click Yes to complete the hardware inst allation.
- 7 - Verify To verify if the device exists in your computer and is enabl ed, go to Start Settings Control Panel System ( Hardware ) Device Manager . Expand the Network Adapters category. If th e 802.11b+g USB Wireless LAN Adapter is listed here, it m eans that your dev i ce is properly installed and enabled.
- 8 - NETWORK CONNECTION Once the device driver is well installed, a network setting described in the following should be also established. In Windows 98SE/ME 1. Go to Start Settings Control Panel Network . 2. Make sure that all the required com ponents are installed.
- 9 - 3. For maki ng your com puter visibl e on the network, ena ble the File and Print Sharing . 4. Click the Identification tab. Make up a name that is unique from the other com puters' nam es on the netw ork. Type the name of yo ur workgroup, which shou ld be the same used by all of the other PCs on the network.
5. Click the Access Control ta b. Make su re that “ Share-level access control ” is selected. If c onnecting to a Netware server, share level can be set to “ User-level acc ess control .” 6. When finished, restart y our com puter to activate the ne w device.
In Windows 2000/XP 1. (In Windows 2000 ) Go to Start Settings Control Panel Network and Dial-up Connections Local Area Connection Prop erties . (In Windows XP ) Go to Start Control Panel Network and In ternet Connections Network Connection Wireless Network Co nnection Enabled USB Wireless Network Ad apter.
2. Make sure that all the required c omponents a re installed. 3. If any component s are m issing, click on the In stall… bu tton to select the Client/Servi ce/Protocol re quired. Aft er selec ting the component you need, clic k Add… to add it in.
- 13 - IP Address Note : When assigning IP Addresses to the computers on the net work, remember to have the IP address for each computer set on the same subnet mask. If your Broadband Router use DHCP technology, however, i t won’t be necessary for you to assign Static IP Address for yo ur computer.
- 14 - Configuration Utility After the Wireless adapter has been successfull y installed, users can us e the included Configuration Utili ty to set their preference. Go to Start J Program J 802.11b+g Wireless LAN J 802.11b+g USB Wireless LAN Utility For Windows 2000/XP , the Confi guration Utility icon will also appe ar in the taskbar.
- 15 - Note : There will be two modes – Station and Access Point for you to switch, you ca n select the m ode you nee d from t he pull-down m enu..
- 16 - Station Select Station mode, and you will se e the following figure. Channel Shows the selected ch annel that is currently in use. (There are 14 channels available, depending on the country.) Type The infrastructure is intended for the connection betwe en wireless network cards and an Access Point.
Tx Rate Click the down arrow ▼ to select the Tx Rate fr om Auto , 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54 Mbps , you can select up to 54 Mbps. Encrypt WEP is a data privacy mechanism based on a 64-bit/128-bit shared key algorithm.
Tx Frame The quantities for the wireless network card trans mit. (Frame: The unit of packet) Rx Frame The quantities fo r the wireless netw ork card receive. (Frame: The unit of packet) More Setting… Channel The Channel will change automatically ac cording to AP’s setting.
- 19 - Network Ty pe The infrastructure is intended for the conn ection between wireless network cards and an Access Point. W ith the wireless adapter, you c an connect wireles s LAN to a wired glob al network via an Access Point The Ad-hoc lets you set a small wi reless workgroup easily and quickly.
- 20 - Default Key ID ： You can set your default key ID at #1~#4 . Key Format ： Select Hexadecimal if y ou are u sing hex adecima l numbers ( 0-9, or A-F ).
Certificate ： Please query your network manager about the certificate, select the same certificate as the c ertification server. Load You may select already sav ed file from the "Profile name" list, and then press "Load " . The setting status will then be restored.
- 22 - Advanced Setting User Interface Language Select English or Trad itional Chinese. Power Consumption Setting Continuous Access M ode (CAM) When this mode is select ed, the power supply will b e normally provided even when there is no throughput.
- 23 - Country Roaming World Mode This function is only en abled and effective with 802.11d standard. User Select Enable this function to se lect the country you are now locating. Fragmentation Threshold The mechanism of Fragmentation Threshold is used to improve the efficiency when high traffic flows along in the wireless network.
- 24 - Access Point To set your 802.11g Wi reless LAN USB Adapter as an Access Point (AP ). In access point mode, the 802.11g Wireless LAN USB Adapter will function as an access point. This allows you to set up y our wireless networks without using a dedicated AP device.
- 25 - Network Adapter You can select the network adapter from the pull-down menu, it shows the device itself （ the 802.11g Wireless LAN USB Adapter ） and also shows the devices supported by the 802.11g Wireless LAN USB Adapter. Connection Station List It shows the stations which are now connecting to the AP.
Tx Frame The quantities for the wireless network card transmit. (Frame: The unit of packet) Rx Frame The quantities for the wireless network card receive.
- 27 - Channel Shows the selected channel that is currently in use. (There are 14 channels available , depending on the country.) Mode Select Mixed Mode or 802.11b only , 802.11g only standard Mode (If you choose this option the device will automaticall y convert the suitable standard ).
- 28 - Authentication Mode Select the Authenticat ion mode from the pull-down menu, there are two modes for you to choose, Open S ystem and Shared Key . Fragment The mechanism of Fragmentation Thres hold is used to improve the efficien cy when high traffic flows along in the wireless network.
MAC Address Filter Click Setting and you will see the following figure. You can select the Filt er Type from the pull-down menu. Disable ： Select to disable the fi lter function. Accept ： You can type in 15 MAC addresses b y clicking Change . If you select Accept, then the MAC address(es) you type in will be connected to the AP.
- 30 - Appendix Soft AP Configurati on Setup Requirement: To bridge your wired and wireless network using 802.11b+g Wireless LAN USB Adapter, the following must be met: 1. Install the 802.11b+g Wireless LAN USB Adapter on the LAN-connected computer. 2.
- 31 - 1. Select the Acces s Point mode, and you will see the following figur e 2. Click the More Setting… button and the following figure will appear for you to configure 3. Select the wired Network Adapt er that has already installed in the PC from the pull-down menu.
- 32 - 4. If the network connected to the wire d LAN card has a DHCP server, you just need to configure th e wireless station as a DHCP client (se lect Obtain an IP address automatically ). If the network does not have a DHCP server, you must assign a fixed IP to the wir ed PC (select Use the following IP address).
Ein wichtiger Punkt beim Kauf des Geräts Abocom WUG2660 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Abocom WUG2660 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Abocom WUG2660 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Abocom WUG2660 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Abocom WUG2660 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Abocom WUG2660 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Abocom WUG2660 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Abocom WUG2660. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Abocom WUG2660 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
