Benutzeranleitung / Produktwartung LVP-X400BU des Produzenten Mitsubishi
Zur Seite of 34
EN – 1 ENGLISH X400B X390 LCD Projector User Manual MODEL LVP-X400BU / LVP-X390U FRANÇAIS DEUTSCH ITALIANO ESPAÑOL.
EN – 2 RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
EN – 3 ENGLISH Contents Important safeguards .......................................................................... 4 Overview ................................................................................................ 6 Using the remote control .
EN – 4 Important safeguards Please read all these instructions regarding your LCD projector and retain them for future reference. Follow all warnings and instructions marked on the LCD pro- jector. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated.
EN – 5 ENGLISH WARNING: Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fire or electric shock. In this case, unplug immediately and contact your dealer.
EN – 6 Overview LAMP VOLUME ZOOM/ FOCUS TEMP VIDEO ENTER COMPUTER MUTE AUTO POSITION MENU 1 2 3 4 5 11 10 9 8 7 6 14 13 12 4 7 65 1 2 3 89 1 0 1 56 7 L R S-VIDEO VIDEO AUDIO MAIN REMOTE AC IN AUDIO .
EN – 7 ENGLISH Bottom side 1 3 2 4 1 Release buttons (Left/Right) 2 Adjustment foot (Left/Right) 3 Air inlet cover 4 Lamp cover Caution: Do not replace the lamp right after using the projector .
EN – 8 Battery installation Use two AA size batteries. 1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -).
´ EN – 9 ENGLISH Installation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector . Front projection T o find the approximate distance between the projector and screen: Multiply the width of the screen x 1.
EN – 10 Basic connections This projector can be connected to equipment such as VCRs, video cameras, videodisc players, and personal com- puters having analog RGB output. Important: • Make sure that your equipment is turned off before connection. • Plug in firmly and unplug by holding the plug, not by pulling the main power cable.
´ EN – 11 ENGLISH For computer with Mini D-SUB 15P terminal (IBM PC or IBM PC compatibles etc.) L R S-VIDEO VIDEO AUDIO MAIN REMOTE AC IN AUDIO OUT VIDEO 1 IN VIDEO 2 IN COMPUTER OUT OI AUDIO 2 IN .
EN – 12 Adjustment foot screen Preparing the projector for operation Getting ready for projection 1. Connect the power cord provided to the projector . 2. Connect the power cord to the wall power outlet. 3. Remove the lens cap. W arning: • Do not look directly into the lens when projector is “ ON ” .
´ EN – 13 ENGLISH T o operate projector power ON • The picture might not be of optimum performance in extreme hot or cold conditions. (The projector is not malfunctioning.) 4. Select the desired external input source by using the COMPUTER or VIDEO button.
EN – 14 A UDIO 15 T o operate projector power ON (Continue) Turning off the projector 9. Press the POWER button. The message “ POWER OFF? YES : PRESS AGAIN ” appears on the screen. • T o exit from this mode, press any button except POWER, LASER, mouse pointer , R/L-click, STILL and VOLUME + and - buttons.
EN – 15 ENGLISH Basic operation Several settings can be adjusted using Menu. EXAMPLE: Auto power off time setting 1. Press the MENU button. 2. Press the $ or % button to select the INST ALLA- TION menu. 3. Press the ENTER button (or } button). 4. Press the { or } button to select AUTO POWER OFF .
EN – 16 Opt INSTALLATION XGA60 OFF KEYSTONE 0 ˚ AUTO POWER ON OFF SPLASH SCREEN ON AUTO POWER OFF OFF IMAGE REVERSE ON Opt XGA60 MENU POSITION VIDEO SIGNAL AUTO LANGUAGE English RESET ALL OK ANAMORPHIC OFF A Ë ? EXPAND MODE 1. FRAME POSI. A A A A 1.
EN – 17 ENGLISH 4 SIGNAL MEMORY CALL ........ Use to select AUTO, USER 1 or USER 2. See below. HORIZ. POSITION .... Use to adjust the horizontal position of the image. VERT. POSITION ..... Use to adjust the vertical position of the image. FINE SYNC.
EN – 18 Adjusting the image Y ou can adjust the picture by using the IMAGE menu. T o control the level of white-to-black in the image : Adjust CONTRAST in IMAGE menu. Press the % button to increase the contrast and the $ button to reduce it. T o control the light level of the image : Adjust BRIGHTNESS in IMAGE menu.
EN – 19 ENGLISH Adjustment from personal computer Although this projector sets proper signal systems automatically for the image signal from personal computers, it cannot be applied to some of personal computers. In this case, press the AUTO POSITION button.
EN – 20 Specification of RGB signals in each computer mode of the projector • When the EXP AND MODE of FEATURES menu is set to real screen display , by pressing the EXP AND button on the remote control, it will switch to the screen dis- playing the picture as its original size (real screen dis- play).
EN – 21 ENGLISH Advanced features for presentation Expand By pressing the EXP AND button on the remote con- trol, you can magnify the detailed image of the picture. Y ou can also view the screen displaying the picture as its original size (native resolution display).
EN – 22 Mouse remote control By connecting to personal computer through the USB or PS/2 port, you can operate your computer with the projector remote control. Projector + computer with USB connector Operation • T urn off computer and the projector before connecting with PS/2 port.
EN – 23 ENGLISH The lamp is designed to project the image on the LCD panels. When the lamp no longer functions, replace it with a new one. Caution: • Do not remove the lamp immediately after using the projector , you may get burned because of the high temperature of the lamp.
EN – 24 Maintenance Caution: Be sure to turn off the projector and unplug the power cord from the wall outlet before you perform any main- tenance on the projector .
EN – 25 ENGLISH T roubleshooting The following offers solutions to some of the common problems you may encounter . We suggest that you consult this chart before contacting your dealer . CAUSE • The air inlet slots, outlet slots or air filter is clogged with dust or some objects.
EN – 26 Indicators The projector has three indicators each of which shows the working condition of the projector . The following offers solutions to possible problems.
EN – 27 ENGLISH Specifications LCD projector L VP-X400BU | L VP-X390U AC100 ~ 240V , 50 / 60Hz 3.7 A 1.3-inch LCD panel: 3 pieces (for R, G, B) Pixels 1,024 × 768 = 786,432 pixels T otal 2,359,296 pixels Active pixel rate: 99.99 % or more (each panel) 16,770,000 colors F 1.
EN – 28 1 Remote control 939P843-10 1 Remote control cable 246C393-10 1 User ’ s manual 871D317-10 1 Quick reference card 857B051-10 2 Battery for remote – Connectors Dimensional drawings (mm) 247 299 51.
Printed in Japan 871D317A10 Manufactured by Mitsubishi Electric Corporation 1 Zusho Baba, Nagaokakyo-City , Kyoto Japan.
1 Control projector by using a personal computer 1) Interface This projector can be controlled by connecting a personal computer with RS-232C terminal.
2 3) Control sequence (1) Send the command from a personal computer to the projector . (The commands must be sent at least 400ms apart.) (2) The projector will send a return command 400ms* after it has received an end code. If the command is not received correctly , the projector will not send the return command.
3 Sending commands Status code from Meaning from the PC etc. projector 30 30 72 35 34 0D Command as same as MENU button '0' '0' 'r' '5' '4' ' &ap.
4 7) Menu setting commands The menu setting commands execute the menu setting of this projector. If the personal computer doesn ’ t send the commands without attaching the data code, the projector which has received the command replays the setting data as data code.
5 [Example 2] Set the difference data of R from G to +10, the setting main data to 0 and the difference data of B from to -5. Sending commands Status code from Meaning from the PC etc.
Ein wichtiger Punkt beim Kauf des Geräts Mitsubishi LVP-X400BU (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mitsubishi LVP-X400BU noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mitsubishi LVP-X400BU - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mitsubishi LVP-X400BU reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mitsubishi LVP-X400BU erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mitsubishi LVP-X400BU besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mitsubishi LVP-X400BU verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mitsubishi LVP-X400BU. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mitsubishi LVP-X400BU gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
