Benutzeranleitung / Produktwartung PD-5050 des Produzenten Mitsubishi Electronics
Zur Seite of 46
Mitsubishi Plasma Displa y PD-5050 & PD-6150 Owner’ s Guide.
IMPOR T ANT SAFETY INSTRUCTIONS (PD-5050/PD-6150) Read before operating equipment 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this plasma display near water . 6. Clean only with a dry cloth.
Impor tant Infor mation Precautions Please read this manual carefully before using your Mitsubishi plasma display and keep the manual handy for future reference. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CA UTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.
NO TE: When you connect a computer to this monitor , use an RGB cable including the ferrite cores on both ends of the cable. If you do not do this, this display will not conform to mandatory FCC standards. Attaching the ferrite cores: Attach the ferrite cores on both ends of the po wer cable (supplied).
The normal use of a TV should include a mixtur e of TV picture types. The most frequentl y used picture types should fill the screen with constantly mo ving images rather than stationary images or patterns.
Cleaning Safeguards Plasma Display Screen & Cabinet Please follo w the cleaning safeguards listed belo w to pre vent damage to your Plasma Display and retain this document for future reference. IMPOR T ANT : No Abrasives! DO NO T use any kind of abr asive cloth or cleaner or ammonia on the Plasma Displa y’ s screen or cabinet.
Introduction Introduction to the PD-5050/ PD-6150 Plasma Displays Mitsubishi’ s PD-5050/PD-6150 plasma displays ar e a seamless blend of cutting-edge visual technology and sophisticated design. The displays sleek techno-ar t lines blend in well with most en vironments.
.
.
1 1 50 mm (2") 50 mm (2") 50 mm (2") Wall Wall 50 mm (2") 50 mm (2") Y ou can attach your optional mount or stand to the plasma display in the following way: 1. Bef or e p er fo rm in g wo rk m ak e su re to d is con ne ct t he A C co rd f ro m the p la sm a dis pl ay .
2 .
3 A A C IN Connect the included po wer cord here. B EXT SPEAKER L and R Connect speakers (optional) here.
4 � PO WER ON/ST ANDBY Switches the po wer to ON or ST ANDBY mode. (These buttons do not operate when POWER/ ST ANDBY indicator of the main unit is off.) SLEEP Press this button to acti v ate the of f timer .
5 Battery Installation and Replacement Insert the 2 AAA batter ies, making sure insert them with the proper polarity . 1. Remove the remote control s back cov er by gently pressing the rigid tab in the direction of the arrow . 2. Instal l the batteri es accord ing to the (+) and () indica tion inside the case.
6 .
7 Con ne ct ing y our P C o r M ac int os h comp ut er to yo ur pl as ma di sp lay wi ll en ab le you to di spl a y yo ur co mpu te r s sc re en im ag e fo r an im pr es si v e pr es en tat io n.
8 5 4 3 2 1 15 14 13 12 11 10 9 8 7 6 MonitorLink and MonitorLink Contr ol 1. Connect a HDMI to HDMI cable from the MONLINK OUTPU T of a Mitsubis hi HD-600 0 Recei v er/Con trol ler to the MONLINK in put on the plasma display .
9 Using the cable clamps pro vided with the plasma display b undle and attach the signal and audio cables to the back panel. Back of the unit mounting hooks/mounting holes T o attach T o detach cables 1.
10 Basic Operations POWER ON: 1. Plug the po wer cord into an activ e AC po wer outlet. 2. Press the Power b utton located underneath the right side of the front panel. The displays PO WER/ST ANDBY indicator turns green and the plasma display is on. OFF: Press the Pow er button (underneath the front panel) to turn of f the display .
11 SLEEP/OFF TIMER T o set the off timer: The off timer can be set to tur n the power of f after 30, 60, 90 or 120 minutes. 1. Press the SLEEP button to start the timer at 30 minutes. 2. Press the SLEEP button to the desired time . 3. The timer starts when the menu turns of f.
12 EXP AND screen size The picture is expanded in the horizontal and v ertical direction, maintaining the original proportions. * Use this for theater size (wide) movies, etc. ZOOM screen size The squeezed film ima ge is expanded to fill the entir e screen at a ratio of 2.
13 Information Supported resolution See page 34 for details on the display output of the various VESA signal standards supported by the display . When 852 (848) dot 480 line wide V GA* signals with a vertical frequency of 60 Hz and horizontal frequency of 31.
14 Menu Operations The follo wing describes how to use the menus and the selected items. 1. Press the MENU/ENTER b utton on the remote control to display the MAIN MENU. SEL. MENU/ENTER OK EXIT EXIT MAIN MENU PICTURE A UDIO IMA GE ADJ. SET UP FUNCTION SIGNAL INFO.
15 .
16 *1 Only when A UTO PICTURE is OFF . *2 RGB/PC only Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET P AGE # REFERENCE FUNCTION POWER MGT . ON ←→ OFF YES 26 INPUT SKIP ON ←→ OFF YES.
17 Picture Settings Menu Storing picture settings This function allows you to store in memory the current input signal and PICTURE menu settings and to recall these settings when necessary . There are six picture memory locations av ailable, and notes of up to 15 characters can be added to each.
18 Reducing noise in the picture Use these settings if the picture has noise due to poor reception or when playing video tapes which hav e poor picture quality . Example: Setting “NR-3” Press MENU/ENTER button to access MAIN MENU. Use the ▲ ▼ b uttons to select the PICTURE menu and then press the MENU/ENTER button.
19 Setting the color temperature Use this procedure to set color tone produced by the plasma display . Example: Setting “HIGH” Press MENU/ENTER button to access MAIN MENU. Use the ▲ ▼ b uttons to select the PICTURE menu and then press the MENU/ENTER button.
20 ColorView™ Use this procedure to adjust hue and color density for red, green, blue, yello w , magenta and cyan. Y ou can accentuate the green color of trees, the blue of the sky , etc. Example: Using COLOR VIEW Press MENU/ENTER button to access MAIN MENU.
21 Audio Settings Menu Adjusting the treble, bass and left/right balance and audio input select The treble, bass and left/right balance can be adjusted to suit your tastes. Example: Adjusting the bass Press MENU/ENTER button to access MAIN MENU. Use the ▲ ▼ buttons to select the A UDIO menu and then press the MENU/ENTER button.
22 SET UP Settings Menu Setting the language for the men us The menu display can be set to one of eight languages. Example: Setting the men u display to “DEUTSCH” Press MENU/ENTER button to access the MAIN MENU. Use the ▲ ▼ b uttons to select the SET UP menu and then press the MENU/ENTER button.
23 RGB SELECT modes One of these 7 modes must be selected in order to display the follo wing signals correctly . A UT O: Select the suitable mode for the specif ications of input signals as listed in the table Computer input signals supported by this system on page 7 of Model Information.
24 Setting the screen size for S1/S2 video input If the S-video signal contains screen size information, the image will be automatically adjusted to f it the screen when this S1/S2 is set to AUT O. This feature is av ailable only when an S-video signal is input via the INPUT3 terminal.
25 Resetting to the default values Use these operations to restore all the settings (PICTURE, A UDIO, IMAGE ADJUST , SET UP , etc) to the factory default v alues. Refer to pages 15 & 16 for items to be r eset. Press MENU/ENTER button to access the MAIN MENU.
26 Function Settings Menu Setting the power mana gement for computer images This energy-sa ving (po wer management) function automatically reduces the displays po wer consumption if no operation is performed for a certain amount of time. Example: T ur ning the pow er management function on Press MENU/ENTER button to access the MAIN MENU.
27 PEAK BRIGHT Use this to activ ate the brightness limiter . Example: Setting “PEAK BRIGHT” to “75%” Follo w the instructions gi ven in the “Reducing b urn-in of the screen” section. Bring up the LONGLIFE menu. Use the ▲ ▼ buttons to select PEAK BRIGHT setting.
28 ORBITER MENU Use this to set menu shift. Example: Setting “ORBITER MENU” to “OFF” Follo w the instructions gi ven in the “Reducing Bur n-in of the screen” section. Bring up the LONGLIFE menu. Use the ▲ ▼ buttons to select ORBITER MENU setting.
29 Application These specifications co ver the communications control of the plasma monitor by external equipment. Use a crossed (re verse) cable. T ype of connector: D-Sub 9-pin male 1 5 9 6 2 34 7 8.
30 Remedy • Def ault seting for ORBITER is ON (A UTO1). In this mode, picture mo ves intermittently around the screen. See page 27 to turn off ORBITER. • If there are no abnormalities in the image and sound, the noise is caused by the cabinet reacting to changes in humidity .
31 *1 Overheat protector If the display becomes too hot, the overheat protector will be acti vated and the display will be turned of f. If this happens, t urn of f the power to the display and unplug the power cord.
32 PD-5050 Specifications Screen Size 43.5"(H) ⳯ 24.5"(V) inches 1106(H) ⳯ 622(V) mm diagonal 50" Aspect Ratio 16 : 9 Resolution 1365(H) ⳯ 768(V) pixels Pixel Pitch 0.032"(H) ⳯ 0.032"(V) inches 0.81(H) ⳯ 0.81(V) mm Color Processing 4,096 steps, 68.
33 PD-6150 Specifications Screen Size 53.2"(H) ⳯ 29.9"(V) inches 1351(H) ⳯ 760(V) mm diagonal 61" Aspect Ratio 16 : 9 Resolution 1365(H) ⳯ 768(V) pixels Pixel Pitch 0.039"(H) ⳯ 0.039"(V) inches 0.99(H) ⳯ 0.99(V) mm Color Processing 4,096 steps, 68.
34 Screen mode When the screen mode is NARR O W , each signal is conv erted to a 1024 dots � 768 lines signal.
35 *1 Only when using a graphic accelerator board that is capable of displaying 852 ⳯ 480. *2 This signal is con v erted to a 1024 dots ⳯ 640 lines signal. *3 The picture is displayed in the original resolution. *4 The aspect ratio is 5:4. This signal is con verted to a 960 dots ⳯ 768 lines signal.
36 Mitsubishi Plasma Display Panel Limited W arranty MITSUBISHI DIGIT AL ELECTRONICS AMERICA, INC . (“MDEA”) w arrants to the original purchaser of this Plasma Display P anel that if purchased from an authorized MITSUBISHI A udio/Video Dealer , should it prov e def ective b y reason of improper workmanship and/or material: a.
Printed in Japan 7S80169 2 Mitsubishi Digital Electronics America 9351 Jeronimo Road Irvine, CA 92618 DECLARATION OF CONFORMITY This device complies with Part 15 of FCC Rules.
Ein wichtiger Punkt beim Kauf des Geräts Mitsubishi Electronics PD-5050 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mitsubishi Electronics PD-5050 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mitsubishi Electronics PD-5050 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mitsubishi Electronics PD-5050 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mitsubishi Electronics PD-5050 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mitsubishi Electronics PD-5050 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mitsubishi Electronics PD-5050 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mitsubishi Electronics PD-5050. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mitsubishi Electronics PD-5050 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
