Benutzeranleitung / Produktwartung DX-PC des Produzenten Mitsubishi Electronics
Zur Seite of 57
.
.
Remote Operation Software (DX-PC For View) i Table of Contents Chapter 1 ─ Overview................................................................................... 1 1.1 In This Manual .............................................................
User’s Manual ii.
Remote Operation Software (DX-PC For View) 1 Chapter 1 ─ Overview 1.1 In This Manual This manual describes installation and operation of DX-PC For View (Rem ote Operation Software) software, which is design ed to be us ed with remote d igital video reco rders (DVRs) .
User’s Manual 2.
Remote Operation Software (DX-PC For View) 3 Chapter 2 ─ Installation CAUTION: If an older version of DX-PC For Vi ew software is installed in your computer, you should uninstall the older version first. NOTE: In the Window s Start menu, go to Control Panel.
User’s Manual 4 5. When the following di alog box appea rs, click Nex t . 6. Click Next . 7. Select whet her or not to r un DX-PC Fo r View autom atically when logging onto Windo ws, and then click Next .
Remote Operation Software (DX-PC For View) 5 8. Set the language option by selecting eit h er Select languag e when star ting DX-PC For View or Alw ays start DX-PC For View usi ng the language below .
User’s Manual 6 10. Click Next . 11. Select I accept the terms in the License Agreement , and cli ck Next . 12. Enter User N ame and Organization , and click Next .
Remote Operation Software (DX-PC For View) 7 13. Select Install Now . 14. Click Finish to complete the MSXML installation..
User’s Manual 8.
Remote Operation Software (DX-PC For View) 9 Chapter 3 ─ Configuration After installing the DX-PC For View software, you will find the DX-PC For View shortcut icon on the desktop. R un the DX-PC For View program by double click ing the icon. T he DX-PC For Vi ew program consists of t he screen, 12 d ocking panels , menu and t oolbar.
User’s Manual 10 NO T E: There might be a problem with screen d isplay or sc reen update d ue to low image tra nsmission speed when using Microsoft Window s Vista or late r operating system. In this situation, it is recommended that y ou disable the A uto Tuning capability of your computer.
Remote Operation Software (DX-PC For View) 11 Remote Sites Panel The Remote Sites Panel displays a list of remote sites registered during DX-PC For View System setup and a list of installed cam eras at the remote sites.
User’s Manual 12 The Map panel pops up another scr een when alarm-in, motion or video loss events are detected or when you click the device icon according to the Map Editor settings. Change the popup screen location by clicking the left mouse button on the screen and dragging it to where you want it located.
Remote Operation Software (DX-PC For View) 13 PTZ, Color and Alarm Out Control Panels Three panels allow PTZ control, color control, and alarm out control while live monito ring a remote site. NOTE: Refer to 4.1 Live Monitoring for more details. Image Processing Panel The Image Processing pa nel allows en hancing played back images.
User’s Manual 14 Alarm-In On Alarm-In Off Motion Detection Object Detection Video Loss Video Blind Text- In Alarm-In Bad Recorder Bad Disk S.M.A.R.T.
Remote Operation Software (DX-PC For View) 15 The Report View panel displays the system status information of remote sites. DX-PC For View checks the remote site and reports system status. Clicking the icon on the pan el reloads the data and clicking the icon prints t he report out.
User’s Manual 16 3.3 Menu System Menu Setup: Allows setting up the system operation and remote site configuration. System 1: Set up t he date/time format for DX-PC For View, display option, and pani c recording function.
Remote Operation Software (DX-PC For View) 17 Date/Time Format : Set the date/time format. Display Option : Set up the screen display, drag & drop popup option, displa y acceleration and OSD.
User’s Manual 18 Recording Setup : Set up the Use (On or Off) of the pani c recording f unction and overwrit ing option of the recording fol der ( On or Off ). Whe n using the panic recordi n g fu nct i on and o ver wri ting option, DX-PC For Vi ew continues recor di n g whe n the hard disk drive is full by ove rwriting t he oldest video.
Remote Operation Software (DX-PC For View) 19 System 2: Set up t he modem connection inform ation for remote access, system password, network option, report function and DVRNS server. Dial-up Network : Select Use modem if you want to use a modem for rem ote access.
User’s Manual 20 Remote Site: Configures the connectio n list for remote access. Add : Click the Add button and en ter the information about the remote site you want to add . – Reference Group : The site should be assigned to a Reference Group for effective management of multiple remote sites.
Remote Operation Software (DX-PC For View) 21 NO TE : When using DVRNS server, place a checkmark in the Use DVRNS box. The IP Address field will be chang ed to DVR Name , and you can enter the name of remote site registered on the DVRNS ser ver. The DVR name you enter should match the name set during the DVRNS setup on the remote DVR .
User’s Manual 22 Favorites – Site Name : Select a registered Favorite site from the drop-down list. – ADD : Adds a new Favorite site. Clicking the button displ ays the Favorites dialog box. Enter the name of the Favorite site to add, and Select the desired sc reen layout used when the Favorite site is co nnected.
Remote Operation Software (DX-PC For View) 23 Sequence Site: Configure the sequence s ite. DX-PC For View conn ects to th e registered sites sequen tially allowing connection to more than one rem ote site. Re gister an Auto Sequencing group an d add desired sites in the Group List to the Auto Seque ncing group.
User’s Manual 24 Save Setup Fil e: Allows saving the current settings of the System – Se tup menu as a .x ml file format. Saving the setu p file can also be performed b y clicking the button on t he toolbar . Batch Job Setup : Allows upgrading or setting up multipl e remote DVRs using the Batch Job Setup screen.
Remote Operation Software (DX-PC For View) 25 Setup: Sets up the re mote setup job for remote sites. Firs t, select the remot e sites to set up from the Group List, and add them to the Setup Sites list by clicking the Add bu tton. Then, click the Setup Now button to initiate the remote setup job for Setup Sites.
User’s Manual 26 View Log: Displays the ty pe of log a nd the num ber of log entries of DX- PC For View. Selecting a log type from the list displays all entries of the selected log type, and you can search for the desired log by setting up a search filter.
Remote Operation Software (DX-PC For View) 27 Exit: Disconnects all current connections a nd exits DX-PC For View program . View Menu Displays or closes the tool bar and panels . Remote Menu NOTE: The Remote menu can also b e activated by clicking the right mouse button after selecting the remote site on the Remote Sites panel.
User’s Manual 28 From : Adjust the search starting date and time. When First is selected, it wil l search from the first logged item. To : Adjust the search ending date and tim e. When Last is selected, it will search to the last log. Find : Displays remote log entries within the selected period.
Remote Operation Software (DX-PC For View) 29 Record Menu NOTE: The Record menu can also be accessed using the toolbar controls. Starts o r ends panic re cording. Selecting Record Play initiates the RecordP layer program and pla ys recorded video. Re fer to 4.
User’s Manual 30 Select the desir ed screen layo ut using the l ayout toolba r. When changing t he sc reen layout, the selected camera on the current screen will be located in the firs t cell of the new layout. When in one of the multi- view formats, selecting Previous Camera s or Next Camera s will move to the previou s or next page.
Remote Operation Software (DX-PC For View) 31 Help Menu Displays DX-PC For View version inf orm ation. 3.4 Toolbar The Toolbar al lows convenient access t o desired functions.
User’s Manual 32.
Remote Operation Software (DX-PC For View) 33 Chapter 4 ─ Operation 4.1 Live Monitoring DX-PC For View provides remote m onitoring functions for viewing video images in real time from either a single s ite or multiple sites.
User’s Manual 34 If you wa nt to sen d audi o t o t h e selected rem ote site, click the button and talk i nt o t he m icrop hone. I f you want to monitor live audio from the selected remote site through the attached speaker , click the button. Clicki ng b ot h button an d butto n allows two-way communication .
Remote Operation Software (DX-PC For View) 35 NOT E: Using the mouse for PTZ control is supported. Click the left mouse button on the image and move that image in the direction you want to by dragging the mouse. Use the mouse wheel to zoom in and out.
User’s Manual 36 Search View Panel The Search View panel consists of playback and search controls, tim e-lapse search table, and event search table. The playback butto ns on the Search View panel pe.
Remote Operation Software (DX-PC For View) 37 Time-Lapse Search Click the button on the Search View panel to enter the time-lapse searc h mode. Selecting a date from the calendar initiates the time-lapse search. The dates for which recorded images ar e availa ble are enabled.
User’s Manual 38 NOTE: The Event Se arch dialog box will differ de pending on the specifica tions of the remote DVR. NOTE: The Text-In (Event Search – Text-In tab) search may not be supported, depending on the specifications and version of the remote DVR.
Remote Operation Software (DX-PC For View) 39 DX-PC For View provides multiple screen layout for playback. The availab le formats are single-screen, quad, 1+7, 3x 3, 4x4, 5x5, 1+32, 6x6, 7x7 and 8x8 and full-screen. When in one of the multi-view formats, clicking the or button will mo ve to the p revious or nex t page.
User’s Manual 40 NOTE: When more than one video segment exists in the same time ra nge due to time overlap, a se gment selection dialo g box will appe ar and ask you to select the video segment y ou want to save from the segment list. Refer to the user manual of the remot e DVR for details on time overlap.
Remote Operation Software (DX-PC For View) 41 NOTE: Motion Searc h is supported only in the single-screen mode. Record Period : Sets up the record period of images to sea rch.
User’s Manual 42 Print Clicking the button on the toolbar prints the image curren tly displayed on the screen on a prin ter connected to your computer. By placing a checkmark in the box beside Include Image Info , text i nform ati on about the site will be included when printing th e imag e.
Remote Operation Software (DX-PC For View) 43 If you want to play bac k video save d in another recording f older, run t he Record Player program first . Move to the Start m enu in Windows. Then, select RecordPlayer from the DX-PC For View options and select the recoding folder path you want.
User’s Manual 44 NOTE: Refer to the manual for each appl icable remote DVR for more details on sy stem setup. Remote System Log : Displa ys the sys tem log in formation o f the remo te DVR conn ected to th e Status View panel. Remote Event Log: Displays the event log information of the remote DVR conn ected to the Status panel.
Remote Operation Software (DX-PC For View) 45 Appendix A ─ Reviewing Video Clips You do not need to install any s pecial soft ware on you perso nal computer to re view video sa ved as Self-Play er files. The file contains a Player program . Double -clicking the target file starts the Player program.
User’s Manual 46 Click to go forward one fr ame of the video clip. Click to play the video cli p in fast forwa rd. Click to go to the end of the video clip. Click to show the previous camera g roup if there is recorded vide o in the previous camera group in t he current screen mode.
Remote Operation Software (DX-PC For View) 47 NOTE: If the VGA card or monitor does not support 800x600 video resolution, Full Screen might not display properly. If this hap pens, press the ESC key on your PC ke yboard to return to the normal screen mode.
User’s Manual 48 Appendix B ─ DVR Name Service (DVRNS) Overview Using Static IP addresses in L AN/WAN networks re qui res hig h managem ent o verhead and i ncreases th e cost burden to users. Therefore, it has become essential for DVRs to support Dynamic IP addresses in ADSL/VDSL networks usi ng DHCP ( Dynamic Host Configu ration Prot ocol).
Remote Operation Software (DX-PC For View) 49 Appendix C ─ Map Editor The Map Editor program allows you to create maps of remote sites. With the drag-and -drop and link function, y ou can create and edit the m ap easily and efficient ly. Run the program by selecting MapEditor from the DX -PC For View options u nder the Start menu in Windows.
User’s Manual 50 Option Menu Click the Option menu to set up th e remote site information , device status display and remote site name to display. Site Infor mation Setting : Select t he Site Inform.
Remote Operation Software (DX-PC For View) 51 Check the box beside Color Use and select each status box to use. Click each selected status box and select the desired co lor. When done, click th e OK button. Unplugged : Either connection to the remote site has failed, or Device No.
User’s Manual 52 Equipment IP Address/ User / Password / Port : Each fie ld is filled in autom atically with the information (user ID , password, and port number) set in Site Information Setting… , or you can enter it manually. Device No. : Set the device number ( 1 ~ 32) for each device.
Remote Operation Software (DX-PC For View) V1.7 53 Go to the Property [Link] tab and set the properties of the selected link box. Name: Enter a name of the link box. Image: Double click the field and select an image to insert in the link box. Link Document : Double click the field and select a map to be linked with the link box.
Ein wichtiger Punkt beim Kauf des Geräts Mitsubishi Electronics DX-PC (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mitsubishi Electronics DX-PC noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mitsubishi Electronics DX-PC - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mitsubishi Electronics DX-PC reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mitsubishi Electronics DX-PC erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mitsubishi Electronics DX-PC besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mitsubishi Electronics DX-PC verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mitsubishi Electronics DX-PC. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mitsubishi Electronics DX-PC gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
