Benutzeranleitung / Produktwartung KM6328 des Produzenten Miele
Zur Seite of 64
Operating and installation instructions Ceramic hobs with induction KM 6328 KM 6366 KM 6367 To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. M.-Nr.
2.
Warning and Safety instructions .....................................5 Guide to the appliance ............................................1 4 Models ..........................................................1 4 KM 6328 ................................
Overheating protection .............................................3 8 Cleaning and care ................................................3 9 Problem solving guide ............................................4 1 Optional accessories ..................
This appliance complies with all relevant safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before installation and before using it for the first time.
Correct application ~ This hob is not designed for commercial use. It is intended for use in domestic households and similar working and residential environments. ~ The appliance is not intended for outdoor use. ~ It is intended for domestic use only to cook food and keep it warm.
Safety with children ~ Children under 8 years of age must be kept away from the appliance unless they are constantly supervised. ~ Children 8 years and older may only use the appliance unsupervised if they have been shown how to use it in a safe way and understand the hazards involved.
Technical safety ~ Installation, maintenance and repairs may only be carried out by a Miele authorised service technician. Installation, maintenance and repairs by unqualified persons could be dangerous. ~ A damaged appliance can be dangerous. Check the appliance for visible signs of damage.
~ While the appliance is under guarantee, repairs should only be undertaken by a service technician authorised by Miele. Otherwise the guarantee is invalidated. ~ The manufacturer can only guarantee the safety of the appliance when original Miele replacement parts are used.
Correct use ~ Oil and fat can overheat and catch fire. Do not leave the appliance unattended when cooking with oil or fat. If oil or fat does catch fire, do not attempt to put out the flames with water. Disconnect the appliance from the mains and use a suitable fire blanket, saucepan lid, damp towel or similar to smother the flames.
~ If the appliance is installed behind a kitchen furniture door, it may only be used with the furniture door open. Do not close the door whilst the hob in use or whilst there is any residual heat present. ~ The appliance gets hot when in use and remains hot for a while after being switched off.
~ Do not use pots or pans on the hob with bases with pronounced edges or ridges. These could scratch or scour the ceramic glass surface permanently. Only use pots and pans with smooth bases. ~ Grains of salt, sugar and sand (e.g. from cleaning vegetables) can cause scratches if they get under pan bases.
~ Metal utensils stored in a drawer under the hob can become hot if the appliance is used intensively for a long time. Do not store any metal items or utensils in a drawer under the hob ~ This hob is fitted with a cooling fan.
Models KM 6328 abcd PowerFlex cooking zones with TwinBooster can be combined to form a PowerFlex cooking area: a + b c + d e Control panel Guide to the appliance 14 e a 8 8 8 8 0 0 b c d.
KM 6366 / KM 6367 ab PowerFlex cooking zones with Booster cdef PowerFlex cooking zones with TwinBooster can be combined to form a PowerFlex cooking area: a + b c + f d + e g Control panel Guide to the.
Sensor controls / displays Guide to the appliance 16 8 8 0 0 a b c min d e f g h i j k l m.
Sensor controls a On/Off b Stop and Go c Timer - For switching on - For switching between timer functions For selecting the switch-off time (see "To switch off a cooking zone automatically").
Cooking zones Cooking zone KM 6328 Minimum to maximum C in cm* Rating in watts for 230 V** y w x z 15–23 Normal TwinBooster level 1 TwinBooster level 2 2100 3000 3700 y + w z + x 22–23 / 1 5x2 3.
Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and should be recycled. Recycling the packaging reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites.
Please stick the extra data plate for the appliance supplied with this documentation in the space provided in the "After sales service, data plate, guarantee" section of this booklet. Cleaning for the first time ^ Remove any protective wrapping and adhesive labels.
The induction principle An induction coil is located under each cooking zone. When a cooking zone is switched on, this coil creates a magnetic field which impacts directly on the base of the pan and heats it up. The cooking zone itself is heated up indirectly by the heat given off by the pan.
Noises When using an induction cooking zone, the following noises can occur in the pan, depending on what it is made of and how it has been constructed. – On the higher power levels, it might buzz. This will decrease or cease altogether when the power level is reduced.
Pans Suitable pans include: – stainless steel pans with a magnetic base – enamelled steel pans – cast iron pans Unsuitable pans: – stainless steel pans without a magnetic base – aluminium an.
Settings Melting butter Dissolving gelatine 1t o2 Making milk puddings 2 Warming small quantities of liquid Cooking rice Defrosting frozen vegetables Cooking pulses 3 Warming liquid and semi-solid foo.
How the hob is operated The hob is equipped with electronic sensor controls which react to finger contact. To operate the hob, touch the relevant sensor. Each time you touch a sensor, an audible tone sounds. Take care to keep the control panel clean and do not place anything on top of it.
Do not leave the appliance unattended whilst it is being used. To switch the hob on ^ Touch the s sensor. 0 will appear in each of the cooking zone displays. If no further entry is made, the hob will switch itself off after a few seconds for safety reasons.
Auto heat-up When Auto heat-up has been activated, the cooking zone switches on automatically at the highest power setting and then switches to the continued cooking setting selected. The heat-up time depends on which continued cooking setting has been chosen (see chart).
Booster The cooking zones are equipped with a Booster or TwinBooster (see "Guide to the appliance"). When activated, the power is boosted for a maximum of 10 minutes so that large quantities can be heated up quickly, e.g. when boiling water for cooking pasta.
Keeping warm function Each cooking zone has a keeping warm function. This function is for keeping food that has just been cooked warm, i.e. food that is still hot. It is not for reheating food that has gone cold. If the keeping warm function has been activated, the cooking zone will switch off automatically after a maximum of 2 hours.
Switching off and residual heat indicators Switching off a cooking zone ^ Touch the "0" on the numerical keypad of the cooking zone you wish to use. A 0 will flash in the cooking zone display for a few seconds. If the cooking zone is still hot, the residual heat indicator will then appear in the display.
– Use a pan lid whenever possible to minimise heat loss. uncovered covered – Select a smaller pan when cooking small quantities. A smaller pan uses less energy than a larger pan with very little in it.
The timer can be used for two different functions: – to set the minute minder – to set a cooking zone to switch off automatically. You can enter a time up to a maximum of 99 minutes. When the set time has elapsed 00 will appear in the display. At the same time a buzzer will sound for a few seconds.
To switch a cooking zone off automatically You can set a time at the end of which a cooking zone will switch off automatically. All the cooking zones can be programmed at the same time.
To use both timer functions at the same time The minute minder and automatic switch-off functions can be used at the same time. If you have programmed in one or more switch-off times and would like to use the minute minder as well : ^ Touch the + sensor repeatedly until 00 and min appear in the timer display.
Stop and Go Your appliance has a Stop and Go feature which, when activated, reduces the power of all cooking zones in use to power level 1. When Stop and Go is activated, the cooking zone power levels and the setting of the timer cannot be altered and the hob can only be switched off.
System lock The hob is fitted with a system lock to prevent it from being switched on without supervision. If the hob is switched on when the system lock is active, LC appears in the timer display for a few seconds. The system lock is deactivated if there is an interruption to the power supply.
Safety switch-off Safety switch-off with an over-long cooking time If one of the cooking zones is heated for an unusually long period of time (see chart) and the power level is not altered, the hob will switch itself off automatically and the relevant residual heat indicator will light up.
Overheating protection All the induction coils and the cooling elements for the electronics are fitted with an overheating protection mechanism. Before the induction coils or cooling elements get too hot, the overheating protection mechanism cuts in in one of the following ways: – If the booster function is being used, this will be switched off.
Danger of injury. Do not use a steam cleaning appliance to clean this appliance. The steam could reach electrical components and cause a short circuit. The appliance should be cleaned after each use. Let it cool down to room temperature before cleaning.
Do not use washing-up liquid to clean the ceramic surface. Washing-up liquid will not remove all soiling and deposits. It will form an invisible coating which will cause permanent discolouration of the ceramic surface. Clean the hob regularly with a suitable ceramic hob cleaning agent.
With the help of the following notes, minor faults in the performance of the appliance, some of which may result from incorrect operation can be put right without contacting the Service Department.
Problem Possible cause Remedy A smell and vapours are given off when a new appliance is being used. The smell and vapours will be less noticeable with each subsequent use before dissipating completely. The ß symbol flashes alternately with the power setting selected in one of the cooking zones.
Problem Possible cause Remedy The hob switches off while it is in use and a "flash" appears in the timer display. One or more of the sensors have been covered, e.g. by finger contact, food boiling over or by an object such as an oven glove. Clean the control panel or remove the obstruction (see "Safety switch-off").
Miele offer a comprehensive range of useful accessories as well as cleaning and conditioning products for your Miele appliances. These can be ordered online at: or from Miele (see back cover for contact details) Pans Miele offer a wide range of pans which are perfect for Miele hobs.
The appliance must only be installed and connected to the electricity supply by a suitably qualified and competent person in strict accordance with current national and local safety regulations. Fit the wall units and extractor hood before fitting the hob to avoid damaging the appliance.
Safety distance above the appliance A minimum safety distance must be maintained between the appliance and the cooker hood above it. See the cooker hood manufacturer's operating and installation instructions for details.
Safety distances to the sides and back of the hob Ideally the hob should be installed with plenty of space on either side. There may be a wall at the rear or a tall unit or wall on one side (right or left) (see illustrations). a Minimum distance of 50 mm between the back of the worktop cut-out and the rear edge of the worktop.
Safety distances underneath the hob To ensure sufficient ventilation to the hob, a certain gap must be left between the underside of the hob and any oven, interim shelf or drawer. The minimum gap between the underside of the hob and – the top of an oven is 15 mm .
Safety distance when installing the appliance near a wall with additional niche cladding A minimum safety distance must be maintained between the worktop cut-out and any niche cladding to protect it from heat damage. If the niche cladding is made from a combustible material (e.
Installation notes Seal between the hob and the worktop Do not use sealant between the hob and the worktop. This could result in damage to the hob or the worktop if the hob ever needs to be removed for servicing. The sealing strip under the edge of the top part of the appliance provides a sufficient seal for the worktop.
Building-in dimensions KM 6328 a Front b Casing depth c Mains connection box The mains connection cable (1440 mm long) is supplied separately. Hob with frame or bevelled edge 51.
KM 6366 a Front b Casing depth c Mains connection box The mains connection cable (1440 mm long) is supplied separately. Hob with frame or bevelled edge 52.
Installing the hob Preparing the worktop ^ Make the worktop cut-out according to the dimensions given in the building-in diagram. Remember to maintain the minimum safety distances (see "Safety instructions for installation"). ^ Seal the cut surfaces with a suitable heat-resistant sealant to avoid swelling caused by moisture.
Building-in dimensions KM 6367 a Front b Casing depth c Mains connection box d Stepped cut-out for granite or marble worktops The mains connection cable (1440 mm long) is supplied separately. Please take careful note of the detailed diagrams for the cut-out dimensions in granite and marble worktops.
Installing the hob Flush fit hobs are only suitable for installation in granite, marble, tiled or solid wood worktops. When using a worktop made from any other material, please check first with the worktop manufacturer that it is suitable for installing a flush fit hob.
Granite and marble worktops Preparing the worktop a Worktop b Hob c Gap As the ceramic glass and the worktop cut-out have a certain dimensional tolerance, the size of gap c can vary (min. 1 mm). ^ Make the worktop cut-out as shown in "Building-in dimensions".
Solid wood, tiled and glass worktops Preparing the worktop a Worktop b Hob c Gap d Wooden frame 13 mm (to be provided on site) As the ceramic glass and the worktop cut-out have a certain dimensional tolerance, the size of gap c can vary (min. 1 mm). ^ Make the worktop cut-out as shown in "Building-in dimensions".
All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current local and national safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous.
The electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective earthing system, which complies with current local and national safety regulations.
In the event of any faults which you cannot remedy yourself, please contact: – your Miele dealer, or – Miele (see back cover for contact details). Please note that telephone calls may be monitored and recorded for training purposes (UK only). When contacting your Dealer or Miele, please quote the model and serial number of your appliance.
61.
62.
63.
Alteration rights reserved / 1113 M.-Nr. 09 524 050 / 01.
Ein wichtiger Punkt beim Kauf des Geräts Miele KM6328 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Miele KM6328 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Miele KM6328 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Miele KM6328 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Miele KM6328 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Miele KM6328 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Miele KM6328 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Miele KM6328. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Miele KM6328 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
