Benutzeranleitung / Produktwartung 09 696 880 des Produzenten Miele
Zur Seite of 76
Oper ating instructions for heat pump dryers T o avoid the risk of accidents or damage to the appliance it is essential to r ead these instructions before it is installed and used for the first time.
Caring for the envir onment 2 Disposal of the packing mate‐ rial The packaging is designed to pr otect the appliance from damage during transportation. The packaging mat erials used are select ed from materials which are envir onmentally friendly for disposal and should be recycled.
Contents 3 Caring for the environment .................................................................................. 2 Warning and Safety instructions ......................................................................... 6 Operating the tumble dryer .
Contents 4 Removing visible fluff ........................................................................................ 40 Cleaning the fluff filters and air flow openings thor oughly ................................ 41 Plinth filter ..............
Contents 5 T echnical data ..................................................................................................... 69 Settings menu ...................................................................................................... 70 Calling up settings .
W arning and Safety instructions 6 It is essential to r ead these instructions. This tumble dryer complies with current safety r equirements. Inap‐ propriat e use can, however , lead to personal injury and damage to property .
W arning and Safety instructions 7 This tumble dryer can only be used by people with reduced physi‐ cal, sensory or mental capabilities, or lack of experience or knowl‐ edge, if they are supervised whilst using it or have been shown how to use it in a safe way and understand and r ecognise the conse‐ quences of incorrect oper ation.
W arning and Safety instructions 8 T echnical safety Before setting up the tumble dryer , check it for any externally visi‐ ble damage. Do not install or use a damaged tumble dryer .
W arning and Safety instructions 9 The tumble dryer must be isolated fr om the electricity supply in the event of a fault and during cleaning and maintenance. This tumble dryer must not be used in a non-stationary location (e.g. on a ship). Do not make any alter ations to the tumble dryer , unless author‐ ised to do so by Miele.
W arning and Safety instructions 10 Please observe the instructions in "Installation and connection" and the "T echnical data". The accessibility of the plug must always be ensured, in or der to disconnect the tumble dryer from the mains.
W arning and Safety instructions 11 T o prevent the risk of fire, the following t extiles must not be dried in this tumble dryer: – Items which have not been washed. – Items, such as workwear , which have no t been thor oughly cleaned and which are still soiled with gr ease, oil or other depos‐ its (such as cosmetics, lotions etc).
W arning and Safety instructions 12 T o prevent the risk of fire, the following t extiles must not be dried in this tumble dryer: – Items which have been cleaned using chemicals (e.g. pr ofessio‐ nal dry-cleaning agents). – Items which contain a lar ge proportion of rubber , foam rubber or rubber -like materials.
W arning and Safety instructions 13 The tumble dryer must not be used without fluff filters or – with damaged fluff filters, or – with a damaged plinth filter . This would cause an ex cessive build-up of fluff which in turn would cause a fault.
W arning and Safety instructions 14 Using a fragr ance flacon (optional accessor y) Only use genuine Miele original fr agrance flacons. The fr agrance flacon must be st ored in its packaging so please make sur e you retain this. Caution. The fr agr ance can leak out of the flacon.
W arning and Safety instructions 15 Accessories Only use genuine Miele original spare parts and accessories with this appliance. If non-Miele parts are used, guar antee, performance and product liability claims will be invalidat ed. The tumble dryer can be combined with a Miele washing machine in a washer -dryer stack.
Operating the tumble dryer 16 Control panel a Display with sensors See the following page for more in‐ formation. b Start/Stop button F or star ting the pr ogramme selected and cancelling a progr amme once it has started. c Drying level button F or all programmes with a selectable drying level.
Operating the tumble dryer 17 Display , OK, sensors These sensors are used t o operate the display when the symbols light up. – sensor Scrolls down the list t o the next op‐ tion or decreases a value. – OK sensor Confirms the progr amme selected, a value set or opens a sub-menu.
Operating the tumble dryer 18 P erfe ct Dry indicator With progr ammes with a selectable dry‐ ing level, the P erfect Dry system calcu‐ lates the r esidual moisture present in the laundry to ensure a pr ecise drying result. The Perfect Dry indicator .
Before using for the first time 19 Removing the protective foil and stickers Remove – the prot ective foil from the door . – any stickers from the fr ont and the lid. Please do not remove any labels (e.g. the data plate), visible when you open the door .
EcoF eedback 20 Y ou can use the EcoF eedback sensor to call up information about the ener gy consumption of your dryer . T ouching the EcoF eedback sensor will call up two types of information: – an estimate of the consumption be‐ fore the pr ogramme begins – the energy consumption during the progr amme.
1. Notes on correct laundry care 21 P oints to note regarding wash‐ ed laundry – When washing very heavily soiled items ensur e that you use sufficient deter gent and select a high tempera‐ ture. If in doubt, wash the it ems sev‐ eral times. – Do not put soaking wet items into the tumble dryer .
1. Notes on correct laundry care 22 Garment care label symbols Drying Normal/higher temper ature Reduced temper ature: Select Gentle tumble (for delicate te xtiles) Do not tumble dry Ironing V ery hot Hot Warm Do not iron Laundry care when dr ying in a tumble dryer See the "Pr ogramme chart".
2. L oad the tumble dr yer 23 It is essential to read "1. Notes on correct laundry care" first of all. Press the butt on to switch the dryer on. The interior drum lighting will come on. The interior drum lighting will automat‐ ically go out after a few minutes and/or after the start of a pr ogramme to save ener gy .
3. Select a progr amme and start it 24 Select a progr amme T urn the progr amme selector . Different pr ogrammes and setting op‐ tions will light up in the display, de‐ pending on the position of the pro‐ gramme select or .
3. Select a progr amme and start it 25 Progr ammes with drying levels – Cottons, Minimum iron, Delicates, Denim, Shirts, Express, Gentle smoothing, Steam smoothing, Au‐ tomatic plus, Sportswear , Outer‐ wear The drying level can be alter ed after selecting one of these progr ammes.
3. Select a progr amme and start it 26 Select any options or delay start (if required) Options Pr ess a button. The button will light up when the option is selected. An option can only be selected when the load indication has gone out in the display .
4. Remove the laundry 27 End of progr amme/Anti-crease At the end of the pr ogramme: Anti- crease/Finish (if anti-crease has been selected) or Finish will light up.
Options 28 The options are switched on or off by pressing the appr opriate button. Not all options can be combined or can be se‐ lected/deselected The button will light up when the option is selected. Gentle tumble Delicate fabric (with the symbol on the care label, e.
Options 29 The following options can be selected in addition to the pr o‐ gramme: Gentle tumble 1 F reshen up 1 Auto load control 1 Anti- crease Buzzer Cottons – – – X X Cottons X X X X X .
Delay start 30 T o select delay start With delay start you can delay the start of the progr amme by up to a maximum of 24 hours. After selecting the pr ogramme, pr ess the Delay start button. The following will light up in the display: Start in h 00 : 00 The sensor will increase the dur a‐ tion by 1 hour up to 24 hours.
Pr ogramme chart 31 Cottons ** Max. load 8.0 kg* Use for Cotton items such as those described under Cott ons Normal with normal residual moistur e. Note – Items ar e dried to a Normal level only . – The Cottons pr ogramme is the most ener gy-efficient for dr y‐ ing cotton items with normal r esidual moisture levels.
Pr ogramme chart 32 W oollens handcare Max. load 2.0 kg* Use for Woollen garments and fabric containing wool blends, e.g. pullovers, jackets and socks. Note – Wool and wool blend it ems are only fluffed up; they ar e not dried completely . – Remove garments as soon as the progr amme has finished.
Pr ogramme chart 33 Express Max. load 4.0 kg* Extra dry, Normal +, Normal, Slightly dry, Hand iron , Hand iron , Ma‐ chine iron Use for Garments suitable for the Cottons pr ogramme. Note The progr amme duration is short er . Denim Max. load 3.
Pr ogramme chart 34 Warm air Max. load 8.0 kg* Use for – Multi-layered fabric whose layers have differ ent drying character‐ istics, e.g. jackets, pillows, sleeping bags and other voluminous items. – Drying individual items, e.g. bath towels, swimwear , tea-towels.
Pr ogramme chart 35 Proofing Max. load 2.5 kg* Normal Use for Drying microfibr e fabric, skiwear , outerwear , fine, closeweave cotton garments (poplin) or tablecloths which are suitable for drying in a tumble dryer and have been treated to provide a water and dirt r e‐ sistant finish.
Pr ogramme chart 36 Outerwear Max. load 2.5 kg* Normal, Hand iron Use for Outerwear which is suitable for drying in a tumble dryer . Cool air Max. load 8.
Changing the progr amme sequence 37 Y ou cannot change to another pr o‐ gramme once a pr ogramme has start ed (this prevents unint entional alterations). If you move the progr amme selector , Change not possible will light up in the display until you move the progr amme selector back to the original pr o‐ gramme.
Cleaning and care 38 Emptying the condensed water container The condensed water is collected in the condensed water container . Empty the condensed water contain‐ er after every drying progr amme. Empty container will light up if the maximum level of the condensed water container is reached.
Cleaning and care 39 Pr eparing the condensed wa‐ ter container for Steam smoothing Condensed water which has col‐ lected in the condensed water con‐ tainer is direct ed into the drum in the Steam smoothing pr ogramme. The condensed water container must therefor e be filled with water up to at least the –min– marker .
Cleaning and care 40 Fluff filters This tumble dryer has 2 fluff filters in the door opening: the upper and lower fluff filters tr ap fluff produced during the drying process. Removing visible fluff Remove any fluff after every drying cycle. Tip: Y ou can also use a vacuum cleaner so that you can remove the fluff without touching it.
Cleaning and care 41 Cleaning the fluff filters and air flow openings thoroughly If the drying duration has become longer or the surface of the filters is visibly compacted with fluff, you should carry out the following clean‐ ing procedur e. If using a fr agrance flacon make sure you r emove it beforehand.
Cleaning and care 42 Plinth filter Only clean the plinth filter when Clean out airways lights up. T o delete Clean out airways : Switch the dryer off and back on again / confirm OK . Removing the plinth filter Pr ess the round, indented ar ea on the heat ex changer access panel to open it.
Cleaning and care 43 Cleaning the plinth filter panel Use a damp cloth to r emove any fluff. Make sure that you do not damage the rubber seal when doing this. Check whether the cooling fins are blocked with fluff (as follows). Checking the condenser unit Danger of injury .
Cleaning and care 44 Replacing the plinth filter Fit the filter back on the handle. Make sure it is the corr ect way round. T o ensure that the filt er is positioned correctly in the fr ont of the heat ex‐ changer unit: First insert the handle with the plinth filter attached over the two guide pins.
Cleaning and care 45 T umble dryer Disconnect the tumble dryer from the mains electricity supply . Do not use solvents, abrasive cleaners, glass cleaners or all-pur‐ pose cleaners.
F ragr ance flacon 46 Using a fragr ance flacon (optional ac‐ cessory) will add a pleasant fragr ance to your laundry . Before using a fr agrance flacon, please read "W arning and safety in‐ structions - Using a fragr ance flacon (optional accessory)".
F ragrance flacon 47 Markers and must line up with one another . T urn the outer ring clockwise a lit‐ tle. – Y ou will feel a slight r esistance and hear a soft click. Marker must be in position : this is the position at which you can feel a resistance.
F ragr ance flacon 48 Damp laundry and longer drying dura‐ tions with sufficient heat transfer ar e needed for the fragr ance to be released into the laundry effectively . The fra‐ grance will also be noticeable in the room air during the pr ocess.
F ragrance flacon 49 Never lay the fragr ance flacon down on any surface as the fra‐ grance will leak. Only store the fr agrance flacon in its original packaging – when storing the fr agrance flacon in its original packaging whilst you are not using it, e.
Pr oblem solving guide 50 With the help of the following notes minor faults in the performance of the appli‐ ance, some of which may result fr om incorrect oper ation, can be put right without contacting the Service Department.
Pr oblem solving guide 51 Problem Cause and remedy Clean out airways lights up at the end of a pro‐ gramme There is a build-up of fluff in the airways. Clean the fluff filters. Clean the plinth filter . See "Cleaning and care".
Pr oblem solving guide 52 Unsatisfactory dr ying results Problem Cause and remedy The laundry is not suffi‐ ciently dry The load consisted of differ ent types of fabric. Finish drying using the Warm air timed drying pro‐ gramme. Select a different pr ogramme ne xt time.
Pr oblem solving guide 53 Other problems Problem Cause and remedy The drying process goes on too long or even switches off * The room in which the dryer is located is t oo warm. V entilate the r oom thoroughly . Deter gent residues, hair and fine fluff can clog the fil‐ ters.
Pr oblem solving guide 54 Problem Cause and remedy There are humming noises This is not a fault. The compressor (heat pump) is oper ating or you have selected the St eam smoothing programme. No action is requir ed. These noises are quite nor‐ mal and can be heard when the compr essor or the condensed water pump is oper ating.
Pr oblem solving guide 55 Bottom right grille In general, the cooling fins be‐ hind the grille on the bottom right do not need cleaning. They should only be cleaned if the drying process is taking an ex ceptionally long time due to a very high level of dust or fluff in the room in which the dryer is loca‐ ted.
Pr oblem solving guide 56 Fluff filter in the condensed water container If you are e xperiencing problems running the Steam smoothing pr o‐ gramme, the fluff filt er at the end of the hose which is connected to the rubber seal in the condensed water container could be blocked.
Pr oblem solving guide 57 Steam smoothing spr ay jet Limescale deposits will impair the spray jet. In this case, the spray jet must be r e‐ moved and replaced with a new one (see "Optional accessories"). The spray jet can only be r eplaced us‐ ing the special tool supplied with the new spray jet.
After sales service 58 Repairs In the event of any faults which you cannot remedy yourself, please contact your Miele Dealer or the Miele Service Department.
Installation and connection 59 F ront view a Mains connection cable b Control panel c Condensed water container – empty after every drying cycle d Door – do not open during drying e Heat ex change.
Installation and connection 60 Rear view a Pr otruding lid for holding when mov‐ ing the dryer (see arrows) b Accessories for ext ernal drainage of condensed water: hose clip, adapter and hose holde.
Installation and connection 61 Installation Levelling the dryer Make sure the dryer door can be opened without hindrance aft er in‐ stallation. The appliance must stand perfectly lev‐ el to ensur e safe and proper oper ation. The screw feet can be adjust ed to com‐ pensate for any unevenness in the floor .
Installation and connection 62 Additional installation require‐ ments F or safety reasons the tumble dryer must be disconnected from the electricity supply before installation. Building under a continuous work‐ top/in a row of kitchen units It is very important to avoid a build-up of heat.
Installation and connection 63 External condensed water out‐ let Notes When drying is in progr ess, con‐ densed water is pumped int o the con‐ densed water container thr ough the dr ain hose which is located at the back of the dryer .
Installation and connection 64 Arranging the dr ain hose Do not pull on the drain hose and do not stretch it or allow it t o be‐ come kinked. This could damage the hose. There will be a small amount of r esidual water left in the dr ain hose. Have a con‐ tainer ready t o collect this.
Installation and connection 65 Examples – Drainage into a sink or floor gully Use the hose holder to pr event the drain hose fr om becoming kinked. Pr ess the small catches on the left and right of the hose holder with your thumbs (black arrows) and .
Installation and connection 66 1. Adapter 2. Nut 3. Hose clip 4. End of the hose (secured with the hose holder) 5. Non-return valve 6. T umble dr yer dr ain hose Fit adapter 1 to the sink dr ain outlet using nut 2 . The nut is usually fitted with a washer which must be removed.
Installation and connection 67 Electrical connection U .K. All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with cur‐ rent national and local safety r egula‐ tions (BS 7671 in the UK).
Consumption data 68 Load 1 Final spin speed in a domestic washing ma‐ chine Residual moisture Energy Dur ation kg rpm % kWh min Cottons 2 8.0 4.0 1000 1000 60 60 2.14 1.28 156 94 Cottons Normal 8.0 8.0 8.0 1200 1400 1600 53 50 44 1.90 1.80 1.60 141 134 119 Cottons Normal + Gentle tumble 8.
T echnical data 69 Height 850 mm Width 596 mm Depth 636 mm Depth with door open 1054 mm Height for building under 820 mm (+8/-2 mm) Width for building under 600 mm Depth for building under 600 mm Suitable for pushing under a worktop Y es Suitable for stacking Y es Weight Appro x.
Settings menu 70 Calling up settings Y ou can use the Settings menu to alt er the dryer's electronics to suit differ ent requir ements. Settings can be altered at any time. Opening the Settings menu Switch the dryer on. The progr amme selector must not be at the F urther programmes position.
Settings menu 71 Drying levels Y ou can alter the drying levels for the Cottons , Minimum iron and Aut omatic plus progr ammes. The setting selected is shown in a bar chart. F actory default: a medium setting – Damper The progr amme duration is short er .
Settings menu 72 Buzzer volume The buzzer can be set t o be louder or quieter . The setting selected is shown in a bar chart. F actory default: a medium setting. – Quieter – Louder Y ou will hear the buzz er change as the setting is selected.
Settings menu 73 Code The code prevents your dryer being used without your knowledge. Options – Activate The code is 250 and can be activa‐ ted. When the code has been activated, you have to enter the code aft er switching the dryer on. Otherwise the dryer cannot be operat ed.
Settings menu 74 Appliance switch-off T o save energy the dryer will switch off automatically after 15 minut es. Y ou can lengthen or shorten the time.
United Kingdom Miele Co. Ltd. Fairacres, Marcham Road Abingdon, Oxon, OX14 1TW Customer Contact Centre Tel: 0330 160 6600 E-mail: mielecare@miele.co.uk Internet: www.miele.co.uk Australia Miele Australia Pty. Ltd. ABN 96 005 635 398 1 Gilbert Park Drive, Knoxfield, VIC 3180 Tel: 1300 464 353, Fax: (03) 9764 7149 Internet: www.
M.-Nr . 09 696 880 / 02 en-GB TKG 440 WP .
Ein wichtiger Punkt beim Kauf des Geräts Miele 09 696 880 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Miele 09 696 880 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Miele 09 696 880 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Miele 09 696 880 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Miele 09 696 880 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Miele 09 696 880 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Miele 09 696 880 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Miele 09 696 880. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Miele 09 696 880 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
