Benutzeranleitung / Produktwartung RE450MX des Produzenten Abocom
Zur Seite of 13
M73-APO01-260 10M Ethernet Attached Port PC Card Adapter Quick Installation Guide.
FCC Regulatory Statements Part15, Class B This device complies with Part 15 of FCC rules. Operation is subject to the following two conditio ns: 1. This device may not cau se harmful interface, and 2. This device m ust accept an y interface recei ved, including interface that m ay cause undesired operation.
- 1 - INTRODUCTION The PCMCIA Ethernet card is a cre dit-card-size Type II PCMCIA Ethernet adapter that complies with the PCM CIA 2.1 a nd IEEE 80 2.3 standards .
- 2 - Operating Environment • Novell Netwar e 3.x, 4.x • Microsoft L AN Manage r • Packet Driver Applications • Microsoft Wi ndows for Wo rkgroups 3.11 , Windows 3.1 • Microsoft Windows N T 3.51, NT 4.0 • Windows 95 • Windows 98 • Windows ME • Windows 200 0 • Windows XP • Lantastic 6.
INSTALLATION Hardware Connections & LEDs Indicators Insert the PCMCIA Ethernet card into the PCMCIA slot of you r notebook RJ-45 Port: Connect one en d o f the Ethernet cable into the card’s RJ-45 port. Plug the ot her end of the cable into a switch hub.
Windows 95 Installation Make sure that the drivers of PCMCIA slot are well installed. The System Icon in the Control Panel can report on its functionality. Apart fro m above mentioned , any que stions on t his layer need to be taken up wi th the com puter's manufact urer.
on its functionality. Apart from which is mentioned above, any questions on this layer ne ed to be taken up with the computer's manufactur er. 1. Once the PC Card is connected to your computer, Windows will automatically detect the new device. Windows will prompt an ADD NEW HARDWARE WIZARD dialog box, then press Next .
5. For the first tim e installation, p lease click Netw ork icon in Control Panel to add Protocols, Client and Service if you needed. 6. Reboot the mach ine and the card will take effect. Windows ME Installation 1. Once the PC Card is connected to your computer, Windows will automatically detect the new d evice.
- 7 - Windows NT 4.0 1. Make sure that the Network Services alre ady installed in the NT 4.0 system. 2. Insert the Ethernet Adapter into one of the system's PCMCIA Slots 3. Power up Windows N T 4.0 4. Open My Computer 5. Open Control Panel 6. Run the Network 7.
Windows 2000 Installation 1. Connect one end of the cable for the PCMCIA Ethernet card to y our com puter and the other end to the port of the new hard ware device. Windows will appear the fo llowing picture. Click Next. 2. Select Search for a suitabl e driver for my device (recommended) .
- 9 - 4. Click Next to make Windows install the appropriate driver for the new device. 5. Click Yes to continue..
6. Click Finish to complete the software installation. Windows XP Installation 1 Once the device is connected, Windows will automatically dete ct the new device. Insert the device Driver Disk into the floppy disk drive of you r syst em. Cl ick Install the software automatically (Recommended) and click N ext.
3. Wait while Windows copies the appropriate driver to your system. 4 Click Finish to complete the software installation. - 11 -.
Ein wichtiger Punkt beim Kauf des Geräts Abocom RE450MX (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Abocom RE450MX noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Abocom RE450MX - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Abocom RE450MX reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Abocom RE450MX erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Abocom RE450MX besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Abocom RE450MX verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Abocom RE450MX. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Abocom RE450MX gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.