Benutzeranleitung / Produktwartung 120/320 CHANNEL UHF-HIGH BAND MOBILE des Produzenten Midland Radio
Zur Seite of 28
User’s Guide Titan™ Series 120/320 Channel VHF-Low Band Mobile 120/320 Channel VHF-High Band Mobile 120/320 Channel UHF-High Band Mobile www.midlandradio.
Titan ™ Mobile User’s Guide 2 © 2005, Midland Radio Corporation FCC RF EXPOSURE COMPLIANCE REQUIREMENTS FOR OCCUPATIONAL USE ONLY The FCC has adopted a safe ty standard fo r human exposure to RF energy.
Titan ™ Mobile User’s Guide Contents Contents ................................................................................... 3 Conventions and Symbols in this Book ................................... 4 Disclaimer .............................
Titan ™ Mobile User’s Guide Conventions and Symbols in this Book This symbol marks a “cauti on”. Cautions are special notices which you shoul d read and follow carefully to a v oid possible damage to your equipment and to avoid po tential danger to yourself or other peop le.
Titan ™ Mobile User’s Guide Do not operate the radi o near unshielded electrical blasting ca ps or in an explosive atmosphere. Do not operate the tra nsmitter of any radio unless all RF connectors are secure. All equipment must be properly grounde d for safe operation.
Titan ™ Mobile User’s Guide Introduction Congratulations! By choosing the Midlan d Titan™ mobile transceiver, you have selected a professional grade radio.
Titan ™ Mobile User’s Guide Radio Features The Titan series mobile transceiver is a programmable, synthesized radio featuring: 5 40 Watts (UHF)/50 Watts (VHF-High Band)/60 Watts (VHF-L o w Band) transmit power for mid power radios . 100 Watts (UHF)/110 Watts (VHF- High Band)/110 Watts (VHF-Low Band) transmit p ower for high power radios 5 12.
Titan ™ Mobile User’s Guide Recommended Accessories and Options Microphones 70-2184 DTMF display and programming microphone 70-2185 DTMF microphone 70-2188 Weatherproof microphone 70-2328A Replace.
Titan ™ Mobile User’s Guide Radio Controls Standard LCD Details Deluxe LCD Details Transmit Icon Monitor Icon Busy Channel Icon Busy Scan Icon 3 Character Alp ha- Numeric Channel Label Priority Sc.
Titan ™ Mobile User’s Guide Standard Control Head 1 3 5 2 6 7 8 4 9 Deluxe Control Head 1 3 5 2 6 7 8 4 10 © 2005, Midland Radio Corporation.
Titan ™ Mobile User’s Guide MON 1. MON button - Press and release the MON button t o defeat any programmed CTCSS/DCS and check the radio channel for traffic before transmitting. Press and release the MON button again to return to CTCSS/DCS mode. SCAN 2.
Titan ™ Mobile User’s Guide Setup Unpacking The following items are supplied in the standard package: 5 One transceiver chassis 5 One control head. 5 One microphone. 5 One DC power cord. 5 One mounting bracket or tray. 5 One mounting hardware package.
Titan ™ Mobile User’s Guide Operation Turning the Radio On and Off Press and hold the power/volume knob for two seconds to turn the radio on. The radio will perform a po we r-on test, which includes lighting all display segment s and may sound a single beep when complete.
Titan ™ Mobile User’s Guide Carrier Squelch Operation A signal that matches the progra mmed receive frequency will b e heard if it is of sufficient strength to exceed the squelch threshold. An on frequency signal ex ceeding the squelch threshold level will be indicated by the BUSY icon.
Titan ™ Mobile User’s Guide 2-tone signaling allows users to receive only calls intended for them. However, more than one radio transmitting at a time will still cause interference. Do not transmit if the BUSY icon is on. Wait until the channel is clear before transmitting.
Titan ™ Mobile User’s Guide Scanning Channels If you have more than one channel programmed, you r Titan radio may be programmed to allow you to scan them. Press and release the SCAN button to activate scan. The radio will begi n checking all channels in the scan list for activity.
Titan ™ Mobile User’s Guide Priority Scan Priority scan is available when your dealer ha s prog rammed Normal or Modify Scan Selection . Use the menu function to select PRI scan mode. The default user selection is PRI scan mode. If enabled in programming, you may assign a second priority channel before starting scan.
Titan ™ Mobile User’s Guide Busy Scan Busy scan is available when your dealer has p rogrammed Normal or Modify Scan Selection . Use the menu function to select SCN scan mode. The default user selection is PRI scan mode. Press and release SCAN to activate Busy scan.
Titan ™ Mobile User’s Guide priority channel. This is the primary difference between Public Safety scan and Priority scan. If activity is detected on a channel, the radio will pause scan an d display that channel. While stopped on a non-prio rity channel, the radio will continue to check for activity on the priority channel(s).
Titan ™ Mobile User’s Guide If activity is detected on a priority channel the radio will switch to and display the priority channel. Transmitting While in Scan Mode In Busy scan mode, when PTT is pressed while scanning, the radio will transmit on the last re ceived chann el.
Titan ™ Mobile User’s Guide Press and release the A/D button to enter scan add/de lete mode. The A/D icon (AX2 on standard head) wi ll be displayed while scan add/delete mode is active. Once y ou are in add/ delete mode, use the channel knob to scroll th rough the channels.
Titan ™ Mobile User’s Guide 3. Press the channel menu knob again to save the new squelch setting and proceed to next menu item, group selection, GRP.
Titan ™ Mobile User’s Guide Specifications (VHF low band) General specificat ions Mid-Power High-Power Frequency range A: 30-36 MHz, B: 36-42 MHz, C: 42-50 MHz FCC ID numbers NCP700511B NCP700511C MMA700671A NCP700671B NCP700671C FCC type acceptance Part 90 Part 90 Maximum number of channels 120 or 320 opt.
Titan ™ Mobile User’s Guide Specifications (VHF high band) General specificat ions Mid-Power High-Power Frequency range B: 150-174 MHz B: 150-174 MHz FCC ID numbers NCP701341B NCP701491B FCC type acceptance Part 90 Part 90 Maximum number of channels 120 or 320 opt.
Titan ™ Mobile User’s Guide Specifications (UHF high band) General specificat ions Mid-Power High-Power Frequency range B: 450-470 MHz B: 450-470 MHz FCC ID numbers NCP701541B NCP701691B FCC type acceptance Part 90 Part 90 Maximum number of channels 120 or 320 opt.
Titan ™ Mobile User’s Guide Titan Mobile Connectors Microphone Connector 1. Mic audio 2. PTT 3. Mic ground 4. Hang-up (JP2) or +12V (JP1) Remove accessory hang-up loop to use mic hang-up. Remove JP2 and install JP1 for DTMF microphones. 5.
Titan ™ Mobile User’s Guide Warranty Statement Midland Radio Corporation (herein , Midland) warrants each new radio product manufacture d or supplied by it to be free from de fects in material and w orkmanship under normal u se and service for a p eriod listed below, p rovided that the user has complied with the requirements stated herein.
This device complies with Part 15 of the FCC Rules. Operation is subject to the condi tion that this device does not ca use harmful interference. This radio operates in FCC regulated frequency bands. All ra dios must be licensed by the FCC before use.
Ein wichtiger Punkt beim Kauf des Geräts Midland Radio 120/320 CHANNEL UHF-HIGH BAND MOBILE (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Midland Radio 120/320 CHANNEL UHF-HIGH BAND MOBILE noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Midland Radio 120/320 CHANNEL UHF-HIGH BAND MOBILE - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Midland Radio 120/320 CHANNEL UHF-HIGH BAND MOBILE reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Midland Radio 120/320 CHANNEL UHF-HIGH BAND MOBILE erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Midland Radio 120/320 CHANNEL UHF-HIGH BAND MOBILE besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Midland Radio 120/320 CHANNEL UHF-HIGH BAND MOBILE verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Midland Radio 120/320 CHANNEL UHF-HIGH BAND MOBILE. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Midland Radio 120/320 CHANNEL UHF-HIGH BAND MOBILE gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
