Benutzeranleitung / Produktwartung LCD-TV des Produzenten Metz
Zur Seite of 110
HOME ENTERT AINMENT Operating instructions for all LCD-TV MK sets Metz - always first class. 606 47 2014.A1 06/19/09 LCD-TV 606 47 2014.A1 LCD-GB MK 22.
Extended functions 1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. Safety notes . . . . . . . . . . . . . . . . . . . . . . . . 5 3. The Remote Control . . . . . . . . . . . . . . . . . . 6 4. Daily Operation . . . . . . . . . . .
3 Contents Configuration W or th knowing 22.3 Automatic DVB-C station search . . . . . . . . 60 22.3 Manual DVB-C station search . . . . . . . . . . 61 23. Station Logo. . . . . . . . . . . . . . . . . . . . . . . 62 24. Sorting Stations . . . . . . .
4 • T ake care that no bright artificial light or sunshi- ne falls directly on the screen. This could cause reflections which have a negative effect on the brilliance of the picture. • The best viewing distance is three times the screen diagonal, i.
5 2. Safety notes • Always place the monitor on a solid, stable surface. • If a cold TV set is moved to a warm room, always allow any condensation on the screen to evaporate before swit- ching it on. • The TV set is intended for use in a dr y room.
6 Ǽ The remote control sends commands to the TV set by means of an infrared sig- nal.
7 3. The Remote Control Over view of the functions of the keys Switch to DVB radio mode. Switch on from the standby state into radio mode 1) . Function keys: F1/F2/F3: press briefly to call the functions set in the factor y . F1/F2/F3: press and hold to display a selection of special functions.
8 4. Daily Operation Switching on Switch on the TV set with the main switch. The TV set is now in standby mode and the red standby indicator lights. After about five seconds, the TV set swit- ches to programme position 1 or to the programmed initial programme position.
9 Selecting stations from the station table In normal TV or radio 1) mode, you can display the station table by pressing the white key . Press the white key repeatedly to display a vir- tual keyboard. Use the respective key to sort the station list alphanumerically .
10 During the design of this TV set, we have made ever y ef for t to make it as easy a possible for you to use it and we hope that you will enjoy familiari- sing yourself with your new TV set. With the "Information" menu, the TV set is able to answer the many questions which may come up during installation and setup.
11 With the "TV menu", we provide you with an assistant to help you find your way through the many possible settings of the TV set. Don't be afraid to change any settings in the various menus. No changes will be saved unless you press the " OK " key to confirm them.
12 T eletext is an additional ser vice provided free of charge by many TV stations. It is an "electronic magazine" through which you can browse in various ways. Opening T eletext: • Press the " TEXT " key . If the selected station offers "TOP-T ext", a "card file" is displayed (see the picture on the left).
13 Double font size Y ou can double the size of the font used for T eletext pages with the F1 key . Pres- sing this key once displays an enlarged picture of the upper third of the page. Pressing it a second and third time dis- plays the centre and lower thirds of the page.
14 Displaying all T eletext marks 6) If you have set marks for a programme position, you can display an over view of these marks by pressing the F3 key . The displayed list shows whe- re the marks are set. Press F3 again to hide the list. Y ou can select the individual marks in the list with the numeric keys.
15 Opening the menu A V playback (devices with switching voltage) Before they can be used, A V devices must be registered and assigned to the appropri- ate input sockets in the menu "A V devices". Playing back a recording from a video cassette, DVD, etc.
16 A V playback (devices without switching voltage) Before they can be used, A V devices must be registered and assigned to the appropri- ate input sockets in the menu "A V devi- ces". In order to see the played back picture, you must switch the TV set to playback mode.
17 10.1 A V Playback VCR function The menu item "VCR" is not available in a 2 ** menu. Picture quality when playing back from tape devices The VCR function ensures an optimum picture quality when playing back recordings from tape devices such as video cassette recorders or cam- corders.
18 11. General Picture Settings Some of the menu items are not available in a 2 ** menu. The picture settings brightness, contrast, colour intensity , sharpness and noise reduction can be set generally for all programme positions and saved as standard values which can be recalled at any time by pressing the " OK " key .
19 Opening the menu MENU 11. General Picture Settings Some of the menu items are not available in a 2 ** menu. The picture settings zoom, vertical position, auto- matic zoom and panorama can be set and saved as general settings for all programme positions.
20 11.1 Picture Settings for Programmes via TV Menu Opening the menu Picture settings for individual programme positions are not available in a 2 ** menu.
21 Opening the menu MENU F2 11.2 Picture Settings for Programme via Station T able Individual picture settings for programme position xy: • Select the programme position whose picture settings you wish to change. • Press the " MENU " key .
22 Opening the menu 12. General Sound Settings Some of the menu items are not available in a 2 ** menu. The sound settings volume, treble, bass, stereo wide and spatial sound can be set generally for all programme positions and saved as standard values which can be recalled at any time by pres- sing the "OK" key .
23 12. General Sound Settings Some of the menu items are not available in a 2 ** menu. Setting SRS-WOW 2) • Press the "MENU" key . The TV menu appears on the screen. • Press the blue key . The menu "Picture and sound" and the menu item "General picture set- tings" are pre-selected.
24 Automatic volume correction Some TV stations transmit their commercials at a higher sound volume than that for the normal pro- gramme. In order to save you from adjusting the volume each time with the remote control, you can activate automatic volume correction.
25 12.1 Sound Settings for Programmes via TV Menu Opening the menu Some of the menu items are not available in a 2 ** menu. V olume correction V arious TV stations broadcast their programmes with different sound volumes. This volume dif fe- rence can be minimised by correcting the volume.
26 12.1 Sound Settings for Programmes via TV Menu Opening the menu Some of the menu items are not available in a 2 ** menu. T one setting The tone setting can be set to "Normal" or "Speech".
27 12.1 Sound Settings for Programmes via TV Menu Some of the menu items are not available in a 2 ** menu. Forced mono It may happen that your TV set switches from mono to stereo in the middle of a programme, alt- hough no stereo sound is being transmitted.
28 12.2 Sound Settings for Prog. via the Station T able Opening the menu Some of the menu items are not available in a 2 ** menu. Making sound corrections: • Select the programme position whose sound set- tings you wish to change. • Press the " MENU " key .
29 Opening the menu 13. Colour Standard Some of the menu items are not available in a 2 ** menu. Normally , your TV set will automatically detect the colour standard (P AL, SECAM, NTSC, NTSC44, P AL60, P ALM or Pal N) transmitted by each sta- tion.
30 Opening the menu 14. Childlock With the aid of the childlock function, you can determine whether or not the TV set can be swit- ched on and which stations may be selected at which times. The childlock can be set such that: a) it is always active, b) one to six TV , radio or A V programmes (Prog A .
b) Permitted programmes: Activate the childlock as described in step a). Use the corresponding numeric key to select the menu item "Permitted xx progs.
The menu item "Reminder" is not available in a 2 ** menu. If you wish to be reminded of something while watching TV , you can set a reminder for any des- ired time. At this time, a window with the remin- der appears on the screen. Setting the reminder time • Press the " MENU " key to open the TV menu.
The menu items "On time" and "Off time" are not available in a 2 ** menu. In the menu item "Timer control", you can pro- gramme a switch-on time, a switch-off time and a sleep timer (switch off after ...). The switch-on time is the time at which the TV set is to be switched on automatically .
Normally , the TV set will determine the current date and time from the T eletext signals of the cur- rently selected station (providing this station sends T eletext). If this is not the case, or if an incorrect date or time is displayed, you can set the date and time manually .
35 16.2 Recording Control Opening the menu This menu item is not available in a 2 ** menu. In the menu item "Recording control", you can set a lead time and an overrun time for timer recordings.
36 16.2 Recording Control Opening the menu Application example: Y ou wish to record a programme received via DVB-T . The programme starts at 22:45 hours, ends at 23:40 hours and is broadcast on ITV .
37 In the case of TV sets with one front end , the pic- ture in picture function (PIP) can only be used for the superimposition of an A V set. In this regard, the following superimposition options are.
38 17. Special Functions Picture-in-Picture Opening the menu If you wish to display the picture from a connected A V device as a picture-in-picture, press the " AV " key and then use the numeric keys to select the desired A V device.
39 17. Special Functions Normal/Speech Opening the menu Opening the menu Selection of "Normal" or "Speech" is des- cribed in Section 12.1, "T one Settings". In this menu, you can temporarily select " Normal " or " Speech ".
40 depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a diffe- rent order and numbered differently . Use the - + key to set this menu item to "Y es". • If desired, press cursor control key and use the - + key to activate the reminder func- tion.
41 17. Special Functions Direct recording of a programme Opening the menu If you wish to record the programme you are cur- rently watching, you can start a direct (one-touch) recording to make the current programme availa- ble to a recording device connected to the EURO sockets.
42 Adjusting the picture format: • Press the F3 key . If you press F3 briefly , the function programmed for F3 (see Section 18.1, "Programming the Function keys") is executed. If you hold down F3 for about two seconds, all possi- ble selections are displayed.
43 If desired, the picture can be shifted up or down in order , for example, to make subtitles visible or to hide "ticker" displays. Adjusting the picture position: • Press the F3 key . If you press F3 briefly , the function pro- grammed for F3 (see Section 18.
44 The remote control has four function keys: F1, F2, F3 and A V . Y ou can programme these function keys with any of the available functions. If you press and hold any function key , a window with the available functions is displayed. The picture on the left shows the functions available for the F2 key .
45 In the menu "Sound settings", you can activate a two-stage mute function. When this function is active, the volume in TV mode can be reduced in two stages with the mute key . Activating the mute function • Press the " MENU " key to open the TV menu.
46 20. EPG EPG is an E lectronic P rogram G uide containing programme information for all impor tant stations. It is broadcast by various stations (in Germany by Kabel1 and RTL 2) and also includes the data for the other TV stations in the countr y . The TV set needs about 30 minutes to initially download the large amount of data.
47 20.1 Activating the EPG The EPG function can be activated by briefly pres- sing the "EPG" key if an EPG programme position has been defined in the menu (see below). If no EPG programme position has been defined in the menu, the following applies.
48 The Electronic Programme Guides are broadcast by several different stations, and the information is therefore presented in various layouts. Y ou can thus choose between different EPGs with dif ferent appearances.
49 20.3 Using the EPG Once all of the EPG data have been collected, briefly pressing the "EPG" key displays the EPG with the current programme on the selected pro- gramme position highlighted. The following keys have special functions in EPG mode: Select a programme.
50 20.3 Using the EPG Selecting a programme and viewing or setting a reminder In the EPG, you can select a programme with the cursor control key . • Press the " OK " key in order to - view the programme if it is already running, or - set a reminder for it if it has not yet started.
51 20.3 Using the EPG Opening the menu Programme Information (Now Showing: ..) After switching to a channel, a box is displayed at the bottom of the screen as shown in the picture. This box contains the following informa- tion: - Channel number (in this example: Pr4).
52 20.3 Using the EPG Recording a Programme Selecting a programme for recording: If you have a video recorder with the dialogue system, the EPG permits you to star t a recording by pressing a single key . • Press the " EPG " key to open the EPG.
53 21. Setting the Countr y and Language The menu items "Language" and "Countr y" are not available in a 2 ** menu. Selecting the language in the TV menu Y ou can select any of the available languages for the TV menu. All texts in the menu and in the help screen (Information) are then displayed in the selected language.
54 22. Setting Stations Setting the reception mode This TV set is capable of operating in three diffe- rent reception modes: Analogue TV : The broadcasting technology which has been used for many years. The signals can be received via a rooftop antenna or a cable.
55 V arious TV standards for picture and sound are used in different countries. If the wrong TV stan- dard is selected, you will not be able to hear the sound, or it will be distorted. The TV standard "L" also uses a different standard for transmission of the picture.
56 Opening the menu 22.1 Setting Stations Analogue TV T errestrial station search The terrestrial station search automatically sear- ches the entire range of available reception fre- quencies for stations. All stations which are found are placed in the station table which is displayed at the end of the search operation.
57 The TV set will normally detect the colour standard (P AL, SECAM, NTSC, NTSC44, P AL60, P AL M) automatically . If this automatic selection does not provide satis- factor y results (which should happen only rarely), you can select the colour standard manually for each programme position.
58 DVB-T station search The DVB-T station search operation searches the entire frequency band for TV and radio stations . All stations which are found are placed in separa- te TV and radio station tables. See Section 29. for details of DVB radio mode.
59 For a manual station search, you must know the channel number or the frequency of the station you wish to find. Executing the manual search • Press the " MENU " key to open the TV menu. • Press the red key to open the menu "Confi- guration".
60 DVB-C station search The DVB-C station search operation searches the entire frequency band for TV and radio stations . All stations which are found are placed in separa- te TV and radio station tables.
61 For a manual station search, you must know the channel number or the frequency of the station you wish to find. Executing the manual search • Press the " MENU " key to open the TV menu. • Press the red key to open the menu "Configuration".
62 23. Station Logo With the aid of the VPS signal, a station logo with a maximum length of 15 characters is automati- cally assigned to each station. If this automatic assignment does not work, or if you want to use a different logo, you can change the setting manually .
63 24. Sor ting Stations Y ou can move, copy and delete individual stations or groups of stations within the station table. Moving, copying and deleting stations • Press the " MENU " key to open the TV menu. • Press the white key to open the station table.
64 25. Registering A V Devices Opening the menu MENU AV (audio/video) devices are external devices which deliver video and/or audio signals (such as video recorders, DVD players, DVD recorders, etc.) and which can be connected to TV sets. All commonly available A V devices are listed in the menu "A V devices".
65 Data Logic video recorder " Data Logic " is a system which provides a dialo- gue between a TV set and a video recorder . This "intelligent" system offers the features such as: - Automatic transfer of the settings for terrestrial or cable TV stations (not DVB) to the video recorder .
66 25. Registering A V Devices Data Logic Opening the menu • Press numeric key , use the - + key to select the correct signal types (OUT/IN) and press the " OK " key .
67 The signal type always refers to the input and output of the A V device. Some A V devices may use a composite video sig- nal (FBAS) for recording and playback operations and an RGB signal for displaying their menus. It is not possible to make a general statement in this respect.
68 The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently . 25. Registering A V Devices Setting signal types DVI/HDMI The signal type always refers to the input and output of the A V device.
69 Connection of external devices with YUV compo- nent output to the "COMPONENT IN" RCA jacks. The signal type always refers to the input and output of the A V device. A V devices equipped with a YUV jack can be con- nected to the LCD TV by means of a YUV cable (see page 81).
70 25.1 Removing A V Devices Opening the menu MENU OK EXIT The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently .
71 Y ou can define an initial programme position in this TV set. This initial programme position is used primarily to select the A V programme position if you use an external receiver . Setting the initial programme position This menu item is not available in a 2 ** menu.
72 MENU The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently .
73 On the rear of the TV set, you will find audio sockets and a digital audio-out socket (see page 81) which can be used to connect the TV set to a HiFi system (HiFi amplifier).
74 MENU Opening the menu 28. Display Configuration This menu item is not available in a 2 ** menu. The green digital display on the front of the TV set can be programmed, as desired, to show the time or the current programme position. Setting the display configuration 2) • Press the " MENU " key to open the TV menu.
75 29. DVB Radio Mode T o switch from TV mode to DVB radio mode, press the " R " key . The screen is automatically blanked after about 30 seconds.
76 The adjustable scope of operation for the TV set can be a great help in finding your way around the complex operating functions of the TV set. The scope of operation can be set to various levels, which are identified by asterisks.
77 • Use the - + key to select the desired scope of operation and press the " OK " key to save the new setting. 2 This menu permits you to configure the use of the TV set to a certain degree.
78 32. Connecting Headphones 31. Operation without the Remote Control Operation without the remote control is provided as an emergency measure in case the batteries of your remote control are exhausted or the remote control is not readily available. The local controls are located on the bottom edge of the TV set, on the right.
79 When receiving a dual-language pro- gramme, you can switch between the two sound channels. In TV mode, press and hold the yellow key until the sound function "Sound mode" is selected. Then use the - + key to select Sound 1 or Sound 2. 34.
80 Ser vice socket for use by your dealer 35. Connections on the Left Headphone socket, diameter 3.5 mm FBAS/Video in (e.g. digital camera or camcorder) Audio in R/L (e.g. camcorder) S-VHS or . Y/C in (e.g. camcorder) Antenna socket 606 47 2014.
81 35.1 Connections on the Rear of the Set (covered by a flap) Viewed from below EURO sockets for connection of external A V devices Video and audio IN/OUT With the aid of an optical audio cable ("T oslink" cable, available from your dealer), the digital audio signal (AC3) provided by the TV set can be extracted for external processing.
82 35.1 Connecting a Hifi Amplifier/A V Receiver Metz LCD-TV HiFi-amplifier A V-Receiver 606 47 2014.A1 LCD-GB MK 22.06.2006 14:13 Uhr Seite 82.
83 35.1 Connecting a Hifi Amplifier/A V Receiver Registering the A V Device with the TV • Enter the TV menu by pressing "MENU". • Press the yellow key to open the "A V Devices" menu. • Use the cursor control key to select "Hifi Amplifier" in the device selection.
84 36. Copying between A V Devices Direct recording Opening the menu If you wish to copy a recording from one of the A V devices connected to your TV set (such as a DVD player) to another connected A V device (such as a video recorder), you must do this by means of a direct recording operation.
85 • Use the cursor control key to select the line "Recording device". If only one such device exists, it is then display- ed. If further recording devices exist, you can select the desired device with the aid of the - + key . • Press the " OK " key to save the settings.
86 Opening the menu MENU 37. Setting the Picture Format Some of the following menu items are not available on a 2 ** menu. Setting the picture format: • Select the A V programme position which deli- vers the picture by pressing the " AV " key and then pressing the numeric key corresponding to the device you want to use.
87 38. Glossar y A V programme position A V devices have one or more connection sockets, depending on the model. The designations of the- se sockets are marked on the device (e.g. A V1). On the A V device, you can select which socket you want to use. The selected socket is shown on the display of the A V device (e.
88 Picture position, ver tical With widescreen films, subtitles are sometimes transmitted in the black area at the bottom of the screen. Y ou can move the picture upwards on the screen to ensure that these subtitles remain visible. Standard values The standard values are the settings (such as brightness, sound volume, colour , etc.
89 38. Glossar y T one settings The tone can be set to either "Normal" or "Speech". In the setting "Speech", the bass and treble components of the sound signal are set to make speech as easy to understand as possible. The setting "Normal" is recommended for music programmes.
90 Mains voltage: 230-240 V AC, 50Hz Antenna input: 75 Ohms, unbalanced DIN 45325 Channel coverage: Standard channels 2 - 12, 21 - 69 Special channels S1 - S20, S21 - S41, S42 ... S46 (Belgium channels OIR) Power consumption Energy consumption per hour (Wh): Multiply the power consumption in W by 1 hour Stand-by: 1.
91 Suppor ted Signal Standards Video HDMI a) 720x480i/p 60Hz RGB b) 720x480i/p 60Hz YCbCr 4:4:4 / 4:2:2 c) 720x576i/p 50Hz RGB d) 720x576i/p 50Hz YCbCr 4:4:4 / 4:2:2 e) 1280x720p 50/60Hz RGB f) 1280x720p 50/60Hz YCbCr 4:4:4 / 4:2:2 g) 1920x1080i 50/60Hz RGB h)1920x1080i 50/60Hz YCbCr 4:4:4 / 4:2:2 i) 640x480p 60Hz RGB Video DVI-D a) .
92 39.1 Upgrade Kits • DVB-S digital upgrade kit 029 NM 1119 For the reception of digital TV and radio sta- tions broadcast via satellites. The DVB upgrade kit is installed in the TV set, which means that no external remote control is needed. Ask your local dealer about any further upgrade kits.
93 40. Inser ting/Removing CA Modules The LCD TV has two slots (CI1 / CI2) for CA modules at the top (card reader for smartcards or decoder cards). T o insert the CA module, open the lid on the top of the LCD TV and insert the CA module in one of the slots as shown in the pictures.
94 41. Basic differences between analog terrestrial reception and DVB-T Information for our dealers and interested customers. In order to understand how the behaviour of DVB-T receivers differs from that of the analog terrestrial receivers used until now , two things are important: digital transmission and the simultaneous broad- casting network.
95 41. Basic differences between analog terrestrial reception and DVB-T Addition Cancellation In most cases, only a few of the 8,192 carrier frequencies will be fully cancelled out and the information which is lost can be reconstructed by the error-correction function of the receiver .
96 Calling the menu MENU The settings of the satellite antenna system must be entered in the menu "Configuration" so that the TV set knows them. These settings should always be made in the order in which they are shown in the right-hand column of the menu, starting at the bottom, i.
97 "DiSEqC" makes it possible to control the satel- lite antenna digitally via the existing antenna cable and is a prerequisite for the reception of signals from more than two satellites (e.g. Astra, Eutelsat, Hotbird). If you wish to receive signals from at least three satellites (e.
98 Y ou can set up to four satellites in the menu "Con- figuration". No satellite is set in the factor y . The LNB frequency is used to switch between the high and low frequency bands. The default fre- quencies Low band 9.75 GHz and High band 10.
99 Before executing a DVB station search, you must make the appropriate search settings. Depending on the features installed in the TV set and your personal requirements, you can make the following settings: All = search for all stations on the selected satelli- te.
100 DVB-S station search The DVB-S station search scans the entire reception band for TV and radio stations and stores them in separate TV and radio station tables. For details of the DVB radio mode, see Section 29 in the operating instructions for the TV set.
101 For the manual search, you must know the fre- quency , the symbol rate and the polarisation of the station for which you want to search. Executing the manual search • Press the MENU key to open the TV menu.
102 With the menu item, "General settings", you can specify whether or not the data are to be saved in the non-volatile memor y of the TV set when trans- mission parameters are changed.
103 Problem Possible cause Remedy TV set does not react to commands from the remote control • No line of sight between the remote control and the TV set. • Sunlight is shining directly on the infrared window of the TV set. • Batteries of the remote control are exhausted.
104 Data Logic does not work. • The Data Logic video recorder with data transfer has not been registered correctly . • The Scart cable does not have all pins connected through. • Open the menu "A V devices" and register the Data Logic video recorder as video recor- der 1 with "Data Logic On".
105 A utomatic station search . . . . . . . . . . . . . 56-60 A V devices, connecting/registering . . . . . . . . 64 A V devices, removing . . . . . . . . . . . . . . . . . . 70 A V programme position . . . . . . . . . . . . . . . . 16 A V playback, devices with switching voltage .
106 I nfo (Information) . . . . . . . . . . . . . . . . . . . . . 10 Initial programme position . . . . . . . . . . . . . . . 71 Interests (see EPG) . . . . . . . . . . . . . . . . . . . . . 50 L anguage for TV menu . . . . . . . . . . . . . . . . . 52 M arks in T eletext, clearing .
107 SRS-WOW . . . . . . . . . . . . . . . . . . . . . . . . . 23 Standard picture settings . . . . . . . . . . . . . . . . 18 Standard sound settings . . . . . . . . . . . . . . . . 24 Station logo . . . . . . . . . . . . . . . . . . . . . . . . . 61 Station search, automatic .
T o connect a PC to the LCD TV , you must first regi- ster the PC with the LCD TV ; see Chapter 25 "Registering A V Devices". Set the signal type for the PC to DVI-A (analogue with VGA cable) or DVI-D (digital with DVI cable), depending on the connection type.
109 ✍ Errors excepted. Subject to changes ! Y our Metz product was developed and manufactured with high-quality materials and components which can be recycled and/or re-used. This symbol indicates that electrical and electronic equipment must be disposed of separately from normal garbage at the end of its operational lifetime.
Metz - W erke GmbH & Co. KG - Zirndor f near Nürnberg Core competence in the areas of electronics and plastics technology to form the basis of the excellent reputation of the Metz W erke that has been built up throughout the world over a period of many decades.
Ein wichtiger Punkt beim Kauf des Geräts Metz LCD-TV (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Metz LCD-TV noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Metz LCD-TV - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Metz LCD-TV reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Metz LCD-TV erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Metz LCD-TV besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Metz LCD-TV verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Metz LCD-TV. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Metz LCD-TV gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
