Benutzeranleitung / Produktwartung MVDP1077 des Produzenten Memorex
Zur Seite of 41
Before operating this pr oduct, please read these instructions completely . User’ s Guide 7'' TFT DISPLA Y PORT ABLE DVD PLA YER WITH REMOTE CONTROL MVDP1077.
Safety Instructions ..................2 Precautions .......................5 Power Sources .....................7 Location of Controls ................9 • Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . 9 • Rear . . . . . . . . . . . .
2 SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: THIS DIGIT AL VIDEO DISC PLA YER EMPLOYS A LASER SYSTEM.
3 SAFETY INSTRUCTIONS (CONT .) FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Dear Customer: Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers.
5 PRECAUTIONS NOTES ON HANDLING: • When shipping the DVD player , always use the original shipping carton and packing materials. For maximum protection, repack the unit as it was originally packed at the factory . • Do not use volatile liquids, such as insect spray , near the DVD player .
6 PRECAUTIONS (CONTINUED) TO OBT AIN A CLEAR PICTURE: The DVD player is a high technology , precision device. If the optical pick-up lens and disc drive parts are dirty or worn down, the picture quality becomes poor .
AC CONNECTION Insert the small end of the AC adapter into the DC IN jack (located on the side of the unit) and connect the other end to a wall outlet having 120V AC, 60 Hz. AC Adapter , DC 9V Z NOTES: • Use the enclosed AC adapter for this product only .
8 POWER SOURCES (CONTINUED) BA TTERY P ACK INSERTION/REMOV AL Follow the diagram below to insert or remove the Battery Pack. CHARGING THE BA TTERY P ACK The Low Battery indicator will blink at the top left-hand corner of the screen when the Battery Pack is low and needs recharging.
1. Display 2. Disc Compartment 3. PLA Y/P AUSE Button 4. SETUP Button 5. Navigation ( π ) Button 6. OPEN Button 7. Navigation ( √ )/V olume - Button 8. ON/ST ANDBY Indicator 9. Navigation ( † ) Button 10. Remote Sensor 1 1. Select/Enter Button 12.
10 LOCA TION OF CONTROLS (CONTINUED) 1 2 3 +10 0 7 4 1 8 5 2 9 6 3 1/ALL TITLE A UDIO F .BWD ANGLE ZOOM F .FWD PREV NEXT SEARCH PROGRAM P AUSE/STEP SLOW SELECT P OWER DISPLA Y SETUP TFT SET R EPEAT M ENU S UBTITLE PLAY STOP C LEAR V OLUME 11 6 1 9 2 3 4 7 8 5 10 13 12 14 15 17 16 25 27 26 28 22 19 20 21 24 23 18 REAR REMOTE 1.
11 REMOTE CONTROL BA TTERY INST ALLA TION BA TTERY PRECAUTIONS Follow these precautions when using a battery in this device: 1. Use only the size and type of battery specified. 2. Be sure to follow the correct polarity when installing the battery as indicated next to the battery compartment.
12 CONNECTION CONNECTING THE UNIT TO A TV USING THE A/V CABLE (INCLUDED) From VIDEO/ AUDIO OUT Jack To VIDEO/ AUDIO In Jacks NOTES FOR CONNECTING TO A TV : • Set the TV’ s TV/VIDEO button or switch to the VIDEO setting. • When connecting the unit, refer to the owner ’s manual of the TV , as well as this manual.
13 CONNECTING THE UNIT TO A TV USING A S-VIDEO CABLE (NOT INCLUDED) From VIDEO/ AUDIO OUT Jack From S-VIDEO OUT Jack To AUDIO In Jacks To S-VIDEO In Jack NOTES FOR CONNECTING TO A TV : • Set the TV’ s TV/VIDEO button or switch to the VIDEO setting.
14 CONNECTION (CONTINUED) CONNECTING THE UNIT TO A HOME THEA TER SYSTEM (COAXIAL JACK) From S-VIDEO OUT Jack From COAXIAL OUT Jack NOTES FOR CONNECTING TO A HOME THEA TER SYSTEM: • Set the TV’ s TV/VIDEO button or switch to the VIDEO setting.
15 ABOUT DISCS PLA Y ABLE DISCS: The following discs can be played back on this DVD player: The region number for this DVD Player is: See the following page for information regarding region numbers.
Notes on Copyright: It is forbidden by law to copy , broadcast, show , broadcast on cable, play in public and rent copyrighted material without permission. DVD video discs are copy protected, and any recordings made from these discs will be distorted.
The Setup menu lets you customize the DVD player by allowing you to select various language preferences, set video/audio settings, adjust what type of television screen you have and more. Use the following instructions to navigate and change the options as described on the upcoming pages.
18 SETUP MENU (CONTINUED) NTSC: Select when using an NTSC TV . P AL: Select when using a P AL TV . AUTO: Select AUTO only if your TV supports both formats, the output signal will automatically follow the video format on the DVD disc. IMPORT ANT : In the USA, the standard is NTSC.
19 SETUP MENU (CONTINUED) LANGUAGE SETUP MENU: Press the SETUP button to enter the Setup menu, select the Language icon using the Navigation ( √ , ® ) buttons, then press the N a vi g a ti o n ( † ) button to select it. Select/change the Setup option as described on page 17.
20 SETUP MENU (CONTINUED) AUDIO SETUP MENU: Press the SETUP button to enter the Setup menu, select the Audio icon using the Navigation ( √ , ® ) buttons, then press the N a vi g a ti o n ( † ) button to select it. Select/change the Setup option as described on page 17.
21 SETUP MENU (CONTINUED) SPEAKER SETUP MENU: Press the SETUP button to enter the Setup menu, select the Speaker icon using the Navigation ( √ , ® ) buttons, then press N a vi g a ti o n ( † ) button to select it. Select/change the Setup option as described on page 17.
22 BASIC OPERA TION IMPORT ANT : When “INV ALID KEY” appears while pressing a button, this means that the corresponding function cannot be performed either on the disc inserted, or in the selected mode. Press the TFT SET button 1 to access the on-screen picture display menu.
23 BASIC OPERA TION (CONTINUED) DISPLA Y Press the DISPLA Y button for DVD : 1 press shows TT (T itle), CH (Chapter) and the elapsed time of the chapter . 2 presses show Audio Language, Subtitle Language, Angle Setting. 3 presses show TT (T itle), CH (Chapter) and the remaining time of the chapter .
24 DVD OPERA TION Slide the POWER switch (on the main unit) to the ON position to turn the unit on. If the unit is in Standby mode (the ON/ST ANDBY indicator is red), press the POWER ON/ST ANDBY button (on the remote) to turn the unit on. 1 Press the OPEN button to open the disc tray , “OPEN” will appear on the screen.
25 DVD OPERA TION (CONTINUED) Close the disc tray . Aft er lo adi ng , t he menu screen of the DVD should appear . Use the Navigation ( √ , ® , π , † ) buttons 1 to select the desired option and press the SELECT button 2 to select it. Adjust the volume as described on page 22.
26 DVD OPERA TION (CONTINUED) Press the Skip ( n ) button 1 to advance the DVD to the beginning of the next chapter . Press the Skip ( o ) button 2 to move the DVD to the beginning of the previous chapter . +10 0 7 4 1 8 5 2 9 6 3 1/ALL TITLE AUDIO F.
27 DVD OPERA TION (CONTINUED) Press the SEARCH button 1 . Press the Navigation ( √ , ® ) buttons ❷ to select the TITLE, then use the Number buttons 3 to select the desired title number . Press the SELECT button 4 and playback will start immediately .
28 DVD OPERA TION (CONTINUED) While in the Playback mode, press the REPEA T button once; “CHAPTER” will appear on the screen briefly and the currently playing Chapter will repeat continuously . Press the REPEA T button a second time; “TITLE” will appear on the screen briefly and the currently playing T itle will repeat continuously .
29 DVD OPERA TION (CONTINUED) Press the MENU button 1 , and the Main Menu of the disc will appear . Use the Navigation ( √ , ® , π , † ) buttons 2 to select the desired option, and then press the SELECT button 3 . This is not available on all discs.
30 DVD OPERA TION (CONTINUED) Press the PROGRAM button; the Program menu will appear on the TV screen. +10 0 7 4 1 8 5 2 9 6 3 1/ALL TITLE AUDIO F.BWD ANGLE ZOOM F.
31 CD OPERA TION Slide the POWER switch (on the main unit) to the ON position to turn the unit on. If the unit is in Standby mode (the ON/ST ANDBY indicator is red), press the POWER ON/ST ANDBY button (on the remote) to turn the unit on. 1 Press the OPEN button to open the disc tray , “OPEN” will appear on the screen.
32 CD OPERA TION (CONTINUED) Press the Skip ( n ) button 1 to advance to the beginning of the next track. Press the Skip ( o ) button 2 to move to the beginning of the previous track.
33 CD OPERA TION (CONTINUED) While in the Playback mode, press the REPEA T button once; “REP 1” will appear on the screen briefly and the currently playing track will repeat continuously . Press the REPEA T button a second time; “REP ALL” will appear on the screen and all of the tracks on the disc will play continuously .
34 CD OPERA TION (CONTINUED) While in the Stop mode, press the PROGRAM button; the Program menu will appear on the TV screen. +10 0 7 4 1 8 5 2 9 6 3 1/ALL TITLE AUDIO F.
35 PICTURE CD OPERA TION Slide the POWER switch (on the main unit) to the ON position to turn the unit on. If the unit is in Standby mode (the ON/ST ANDBY indicator is red), press the POWER ON/ST ANDBY button (on the remote) to turn the unit on. 1 Press the OPEN button to open the disc tray , “OPEN” will appear on the screen.
Check the following before requesting service: 36 TROUBLESHOOTING GUIDE SYMPTOM GENERAL No power . P ower on, but unit not functioning properly . No picture. No sound. Playback picture rolls. The playback picture is poor . The Search feature is not working.
37 TROUBLESHOOTING GUIDE (CONTINUED) SYMPTOM D VD The unit does not start playback. Some functions do not operate as stated. S elected language is not being shown in the subtitles, or spoken. Subtitles are not working properly . Angle cannot be changed.
Caring for Discs • Treat the disc carefully . Handle the disc only by its edges. Never allow your fingers to come in contact with the shiny , unprinted side of the disc. • Do not attach adhesive tape, stickers, etc. to the disc label. • Clean the disc periodically with a soft, lint-free, dry cloth.
Power Requirements ...........................................................DC IN 9V (Center Positive z ) Battery Pack ..........................................Lithium-ion Rechargeable Battery DC 7.4V 2000mAh Weight ................................
Memcorp, Inc. Weston, FL Printed in Hong Kong Visit our website at www .memorexelectronics.com.
Ein wichtiger Punkt beim Kauf des Geräts Memorex MVDP1077 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Memorex MVDP1077 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Memorex MVDP1077 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Memorex MVDP1077 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Memorex MVDP1077 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Memorex MVDP1077 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Memorex MVDP1077 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Memorex MVDP1077. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Memorex MVDP1077 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
