Benutzeranleitung / Produktwartung MPD8846 des Produzenten Memorex
Zur Seite of 24
PERSONAL AM/FM STEREO/COMP ACT DISC MP3 PLA YER MODEL: MPD8846 BEFORE OPERATING THIS PRODUCT, PLEASE READ THESE INSTRUCTIONS COMPLETELY. OPERA TING INSTRUCTIONS MPD8846.
1 SAFETY PRECAUTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
2 INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
3 Dear Customer: Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers.
4 LOCA TION OF CONTROLS 1. DC 4.5V Jack (Side of Unit) 2. Battery Compartment (Inside of CD Compartment) 3. MENU/ESP/BAND Button 4. Display 5. MODE/ ¥ Button 6. PRESET ▼ Button 7. Skip/TUNING DN ( ) Button 8. STOP ( ■ )/ Power Off Button 9. Skip/TUNING UP ( ) Button 10.
5 This CD player requires either two (2) “AA” cell standard batteries (not included) or the AC adapter (not included). BATTERY INSTALLATION “Low Battery” will light in the display when batteries are low (when using battery power). 1. Open the CD Compartment, then open the battery compartment door by pressing in the tab and lifting it.
6 RADIO OPERA TION Set the VOLUME control ❶ to minimum and plug the headphone into the PHONES jack. Press the PLAY/PAUSE () /POWER ON button ❷ to turn the unit on. 1 TO LISTEN TO THE RADIO Slide the FUNCTION switch ❶ to the RADIO position. Press the MENU/ESP/BAND button ❷ to select a band (AM or FM).
7 RADIO OPERA TION (CONTINUED) Tune a desired station as described in the previous section. Press the PROG. button; the preset number will blink. 1 TO SET AND RECEIVE A ST A TION INTO MEMOR Y Within ten seconds, select the desired preset using the PRESET ▲ ❶ or ▼❷ button to set the memory.
8 CD OPERA TION Press the PLAY/PAUSE ( ) /POWER ON button ❶ to turn the unit on. Slide the FUNCTION switch ❷ to the CD position. NOTE: If the FUNCTION switch is in the CD position and there is a CD in the CD Compartment, the CD will automatically start playing when the power is turned on.
9 CD PLAYBACK NOTES: • See page 16 for more information on MP3’s. • When recording (“burning”) CDs, make sure the session is “finalized”, or simply record (“burn”) only one session. You can find more information in your recorder’s manual.
10 CD OPERA TION (CONTINUED) After you insert the disc into the CD player and the total number of tracks and time appear on the display, you may press either the Skip/TUNING DN ❶ or UP ❷ button to select a specific track for playback.
11 CD OPERA TION (CONTINUED) During playback, depress and hold either the Skip/TUNING DN ❶ or UP ❷ button to move the player forward or backward within a track to locate a specific musical passage. The player will move forward or backward at high speed as long as the buttons are depressed.
12 CD OPERA TION (CONTINUED) To repeat all the tracks on the CD, while in the Stop mode, press the MODE/ ¥ button twice; “REP A” will appear in the display. 1 REPEA T PLA YBACK OF ALL TRACKS Press the PLAY/PAUSE ( )/POWER ON button ❶ to begin playback.
13 CD OPERA TION (CONTINUED) While in the Stop mode, press the MODE/ ¥ button three times (four times if an MP3 CD with multiple directories is inserted); “INTRO” will appear in the display. 1 INTRO PLA YBACK (Will play the first 10 seconds of each track) Press the PLAY/PAUSE ( )/POWER ON button ❶ to begin Intro playback.
14 CD OPERA TION (CONTINUED) While in the Stop mode, press the PROG. button. The track number will blink and “P-01” will appear in the dis- play. 1 TO PROGRAM THE MEMORY (UP TO 24 TRACKS) Programming is the ability to preselect the order in which a series of tracks will be played.
NOTES ON PROGRAM PLAYBACK • You can review the program by pressing the PROG. button repeatedly while in the Stop mode. • To add a track to the program memory, simply press the PROG. button repeatedly until the track (Directory for MP3) appears and “00” blinks in the display, then follow steps 2 and 3 on the previous page.
MP3 F AQs - Frequently Asked Questions Please read before playing an MP3 CD. Does the unit support packet write CD-RW? Y es it can. Y ou can add or delete MP3 files without reformatting. It appears like a PC hard drive. Can the unit read regular music CDs? Y es it can.
17 While in the Stop mode, press the MENU/ESP/BAND button; the alpha- bet will appear in the display. 1 SELECTING SONGS BY MP3 TITLE You can search for a song by title as follows: Select the first letter of a file you would like to listen to using the MODE/ ¥ ❶ and/or RESUME/ ❷ buttons.
18 Press the MENU/ESP/BAND button twice; the first directory will appear in the display, as well as its contents. 1 SEARCHING THROUGH MP3 DIRECTORIES You can search the contents of the directories (if burned on CD) as follows: To select a file from the directory, use the MODE/ ¥ ❶ and/or RESUME/ ❷ buttons.
19 SINGLE SESSION The following chart is an example of a Windows Explorer display that will appear on your computer monitor for a single session MP3 CD ROM with directories/albums. Check the added notes to help you understand the MP3 CD unit display and the playback sequence of directories/ albums and tracks on a single session MP3 CD.
20 CARE AND MAINTENANCE Caring for Compact Discs • Treat the compact disc carefully. Handle the compact compact disc only by its edges. Never allow your fi ngers to come in contact with the shiny, unprinted side of the compact compact disc. • Do not attach adhesive tape, stickers, etc.
21 TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM CAUSE SOLUTION Unit will not Dead batteries, or not Replace batteries, and install turn on. installed properly. properly. Weak or dead Re- Recharge or replace chargeable batteries.
MPEG Rate ............................................................................32-384Kbps Sampling Frequency ..................................8/11.025/12KHz for MPEG2.5 16/22.05/24KHz for MPEG2 32/44.1/48KHz for MPEG1 MP3 Playback ............
Memcorp, Inc. Weston, FL Printed in Hong Kong Visit our website at www .memorexelectronics.com MPD8846.O/M.QXD 2/24/03 7:25 AM Page 23.
Ein wichtiger Punkt beim Kauf des Geräts Memorex MPD8846 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Memorex MPD8846 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Memorex MPD8846 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Memorex MPD8846 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Memorex MPD8846 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Memorex MPD8846 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Memorex MPD8846 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Memorex MPD8846. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Memorex MPD8846 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
