Benutzeranleitung / Produktwartung MLT2022 des Produzenten Memorex
Zur Seite of 37
Befor e operating this pr oduct, please r ead these instructions completely . User’ s Guide 20" Wide-screen LCD Stereo Monitor with Integrated TV T uner ML T2022 * High Definition (HDTV) monitors require an optional set-top box to receive true digital high definition broadcasts.
Contents ................................................................................................................................................................................ 1 Important Safety Instructions .................................
2 IMPORT ANT SAFETY INSTRUCTIONS FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IMPORT ANT SAFETY INSTRUCTIONS (CONTINUED) 3 Before using the unit, be sure to read all operating instructions carefully . Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna.
13. LIGHTNING T o protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
1 2 3 4 56 12 11 10 9 8 7 1. VOLUME Down/Navigation Left Button - Press to lower the volume or navigate left in the setting menu. 2. MENU/ENTER Button - Press to access the on- screen menu or press to enter the setting. 3. VOLUME UP/Navigation Right Button - Press to raise the volume or navigate right in the setting menu.
1 2 3 4 5 11 6 7 8 9 10 1 11 2 3 4 5 6 7 8 9 10 12 13 14 15 16 17 18 6 LOCA TION OF CONTROLS (CONTINUED) 1. Main POWER Switch 2. DC 12V IN Jack ( z z ) 3. Earphone Jack 4. VGA (PC) AUDIO IN Jack 5. VGA (PC) IN Jack 6. COMPONENT IN Jacks (CR/CB/Y) 7. COMPONENT IN Audio Left/Right Jacks 8.
REMOTE CONTROL 7 BA TTER Y INST ALLA TION 1 Slide to open the battery compartment cover . Install two “AAA” batteries (not included), paying a ttention to the polarity diagram in the battery compartment. Replace the battery compartment cover . BA TTER Y PRECAUTIONS Follow these precautions when using batteries in this device: 1.
CABLE (CA TV)/SA TELLITE CONNECTIONS 8 This TV has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some Cable TV companies of fer “premium pay channels” in which the signal is scrambled.
9 OUTDOOR ANTENNA CONNECTIONS OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT SUPPLIED) Follow the instructions for the type of antenna system you intend to use.
10 VCR CONNECTIONS CONNECTION USING COAXIAL CABLE: Follow the instructions below to connect a VCR to your television using a 75 ohm coaxial cable. (CABLES NOT INCLUDED.) 1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR.
11 CONNECTION USING S-VIDEO CABLE: Follow the instructions below to connect an S-VIDEO VCR to your television using an S-video cable. (CABLES NOT INCLUDED.) VCR CONNECTIONS (CONTINUED) 1 . Connect the cable, satellite or incoming antenna to the ANT jack on the rear of the VCR.
12 DVD CONNECTIONS CONNECTION USING AUDIO/VIDEO CABLES: F ollow the instructions below to connect a DVD player to your television using Audio/Video cables. (CABLES NOT INCLUDED.) CONNECTION USING S-VIDEO CABLE: Follow the instructions below to connect a DVD player to your television using the S-Video cable.
13 DVD CONNECTIONS (CONTINUED) CONNECTION USING COMPONENT CABLES: Follow the instructions below to connect a DVD player to your television using the Cr , Cb, Y jacks. (CABLES NOT INCLUDED.) COMPUTER CONNECTION Follow the instructions below to connect a computer to your television/monitor .
14 SETTING THE MENU Make sure the main power switch is on as shown above, then press the POWER button 1 to turn on the TV ; the POWER indicator will light green. Press the ENTER/MENU button 2 ; the Video Menu screen will appear . 2 1 Press the ENTER/MENU button to select the Main Display option.
15 SETTING THE MENU (CONTINUED) PICTURE IN PICTURE (Y ou must have a VGA and another source connected) Set the Video to PC as shown on previous page. NOTE: Y ou must select the V ideo mode to PC, otherwise, the picture in picture function will not be able to operate.
16 SETTING THE MENU (CONTINUED) IMAGE SETUP Make sure the main power switch is on as shown on page 14, then press the POWER button 1 to turn on the TV ; the POWER indicator will light green. Press the ENTER/MENU button 2 ; the Video Menu screen will appear .
17 SETTING THE MENU (CONTINUED) IMAGE SETUP (CONTINUED) P ress the CHANNEL/Navigation UP 1 o r DOWN 2 b utton until SMART THEME is selected. Set the desired Smart Theme (User , Standard, Rich, MultiMedia, Nature or Soft) using the VOLUME UP/Navigation Right 3 or VOLUME DOWN/Navigation Left 4 button.
18 SETTING THE MENU (CONTINUED) AUDIO SETUP Make sure the main power switch is on as shown on page 14, then press the POWER button 1 to turn on the TV ; the POWER indicator will light green. Press the ENTER/MENU button 2 ; the Video Menu screen will appear .
19 SETTING THE MENU (CONTINUED) AUDIO SETUP (CONTINUED) Press the CHANNEL/Navigation UP 1 or DOWN 2 button until SOUND THEME is selected. Set the desired sound theme (USER, POP , CLASSIC, VOICE, JAZZ, FLA T) using the VOLUME UP/Navigation Right 3 or VOLUME DOWN/Navigation Left 4 button.
20 SETTING THE MENU (CONTINUED) FEA TURE SETUP Make sure the main power switch is on as shown on page 14, then press the POWER button 1 to turn on the TV ; the POWER indicator will light green. Press the ENTER/MENU button 2 ; the Video Menu screen will appear .
21 SETTING THE MENU (CONTINUED) FEA TURE SETUP (CONTINUED) Press the CHANNEL/Navigation UP 1 or DOWN 2 button until LANGUAGE is selected. Set the desired on-screen language (ENGLISH, SP ANISH, FRENCH) using the VOLUME UP/Navigation Right 3 or VOLUME DOWN/Navigation Left 4 button.
22 SETTING THE SYSTEM AND SETTING THE CHANNELS INTO MEMOR Y Make sure the main power switch is on as shown on page 14, then press the POWER button 1 to turn on the TV ; the POWER indicator will light green. Press the TV/VIDEO button 2 repeatedly to select the TV mode.
ADDING AND SKIPPING CHANNELS 23 After setting channels into memory , you can add or delete channels as follows: Make sure the main power switch is on as shown on page 14, then press the POWER button 1 to turn on the TV ; the POWER indicator will light green.
TV OPERA TION 24 Adjust the volume level by pressing the VOLUME UP/Navigation Right 1 or VOLUME DOWN/Navigation Left 2 button. The volume level will be indicated on the screen by a blue bar . 3 For proper operation, before selecting channels, they must be set into the TV’ s program memory , see page 22.
TV OPERA TION (CONTINUED) 25 MUTE CHANNEL RETURN Repeatedly press this button to cycle through the device(s) connected to the INPUT jacks (TV/CA TV , A V , SV (S-Video), YPbPr and PC). NOTE: • For PC mode, if “PC No Signal” appears on the screen, please refer to “ COMPUTER CONNECTION ” (see page 13).
26 TV OPERA TION (CONTINUED) INFO THEME Press the FREEZE/EXIT MENU button to freeze the image on the screen. The image will appear on the screen, but the sound will continue to play . Press the FREEZE/EXIT MENU button again to unfreeze the image. 1 FREEZE For private listening, insert an earphone into the EARPHONE jack on the rear of the unit.
WHA T IS CLOSED CAPTIONING? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing-impaired viewers or it will translate and display text in another language.
SETTING V -CHIP 28 V -Chip enables parents to prevent their children from watching inappropriate material on TV . V -Chip reads the ratings for p rogramming (except for news, sports, unedited movies on premium cable and Emergency System signals), then denies access to programming if the program’s rating meets the limitations you select.
29 SETTING P ARENT AL CONTROL (CONTINUED) Enter the V -CHIP menu screen as described on page 28. 1 Press the CHANNEL/Navigation UP 1 or DOWN 2 button until MP AA RA TING is selected.
30 SETTING P ARENT AL CONTROL (CONTINUED) Enter the V -CHIP menu screen as described on page 28. 1 Press the CHANNEL/Navigation UP 1 or DOWN 2 button until TV -RA TING is selected, then press the VOLUME UP button 3 to select it.
31 Enter the V -CHIP menu screen as described on page 28. 1 Press the CHANNEL/Navigation UP 1 or DOWN 2 button until P ASSWORD SETTING is selected, then press the VOLUME UP button 3 to select it.
SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION POWER No power . The AC adapter/cord is not connected. Connect the AC adapter/cord properly . Main Power switch not in On (I) position. Press Main Power switch to On (I) position. TV BROADCAST RECEPTION TV station experiencing problems.
RECEPTION DISTURBANCES 33 IGNITION: Black spots or horizontal streaks may appear , picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electric drills and other electric appliances. GHOSTS: Ghosts are caused by the television signal following two paths.
Power Source ......................................................................................................... AC 120V , 60Hz Max. Power Consumption ..............................................................................................
35 CARE AND MAINTENANCE T o prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. The finish on the receiver may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping the plastic parts.
Memcorp, Inc. Weston, FL Printed in T aiwan V isit our website at www .memorexelectronics.com.
Ein wichtiger Punkt beim Kauf des Geräts Memorex MLT2022 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Memorex MLT2022 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Memorex MLT2022 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Memorex MLT2022 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Memorex MLT2022 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Memorex MLT2022 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Memorex MLT2022 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Memorex MLT2022. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Memorex MLT2022 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
