Benutzeranleitung / Produktwartung MLT1522 des Produzenten Memorex
Zur Seite of 34
Befor e operating this pr oduct, please r ead these instructions completely . User’ s Guide 15" LCD Stereo Monitor with Integrated TV T uner ML T1522 * High Definition (HDTV) monitors require an optional set-top box to receive true digital high definition broadcasts.
Contents ................................................................................................................................................................................ 1 Important Safety Instructions .................................
2 IMPORT ANT SAFETY INSTRUCTIONS FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IMPORT ANT SAFETY INSTRUCTIONS (CONTINUED) 3 Before using the unit, be sure to read all operating instructions carefully . Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna.
13. LIGHTNING T o protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
1 2 3 4 56 12 11 10 9 8 7 1. VOLUME Down/Navigation Left Button– Press to lower the volume or navigate left in the setting menu. 2. MENU/ENTER Button– Press to access the on- screen menu or press to enter the setting. 3. VOLUME UP/Navigation Right Button– Press to raise the volume or navigate right in the setting menu.
1 2 3 4 5 6 7 8 9 1 9 3 4 5 6 7 8 2 10 11 12 13 14 6 LOCA TION OF CONTROLS (CONTINUED) REAR P ANEL REMOTE 1. MUTE Button 2. Direct Channel Selection/Number (0-9) Buttons 3. 1-- Button 4. CHANNEL/Navigation Up Button 5. VOLUME Down/Navigation Left Button 6.
REMOTE CONTROL 7 BA TTER Y INST ALLA TION 1 T o remove the battery compartment cover , press in on the tab and then lifting it up. I nstall two “AAA” batteries (not included), paying attention to the polarity diagram in the battery compartment. Replace the battery compartment cover .
CABLE (CA TV)/SA TELLITE CONNECTIONS 8 This TV has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some Cable TV companies of fer “premium pay channels” in which the signal is scrambled.
9 OUTDOOR ANTENNA CONNECTIONS OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT SUPPLIED) Follow the instructions for the type of antenna system you intend to use.
10 VCR CONNECTIONS CONNECTION USING COAXIAL CABLE: Follow the instructions below to connect a VCR to your television using a 75 ohm coaxial cable. (CABLES NOT INCLUDED.) 1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR.
11 CONNECTION USING S-VIDEO CABLE: Follow the instructions below to connect an S-VIDEO VCR to your television using an S-video cable. (CABLES NOT INCLUDED.) VCR CONNECTIONS (CONTINUED) 1 . Connect the cable, satellite or incoming antenna to the ANT jack on the rear of the VCR.
12 CONNECTION USING S-VIDEO CABLE: Follow the instructions below to connect a DVD player to your television using the S-Video cable. (CABLES NOT INCLUDED.) 1 . Connect the left and right audio cable from t he DVD’s Audio OUT jacks to the TV’s audio left and right AUDIO IN jacks.
13 COMPUTER CONNECTION Follow the instructions below to connect a computer to your television/monitor . (CABLES NOT INCLUDED.) VIEWING ANGLE ADJUSTMENT This unit is designed to allow you to have a comfortable viewing angle, which can be adjusted from –5° to +25°.
14 SETTING THE MENU Press the POWER button 1 to turn on the TV ; the POWER indicator will light orange. Press the MENU button 2 ; the Main Menu screen will appear .
15 SETTING THE MENU (CONTINUED) IMAGE SETUP Press the POWER button 1 to turn on the TV ; the POWER indicator will light orange. Press the MENU button 2 ; the Main Menu screen will appear .
16 SETTING THE MENU (CONTINUED) AUDIO SETUP Press the POWER button 1 to turn on the TV ; the POWER indicator will light orange. Press the MENU button 2 ; the Main Menu screen will appear .
17 SETTING THE MENU (CONTINUED) PC SETUP (MUST BE SET T O PC MODE) Press the POWER button 1 to turn on the TV ; the POWER indicator will light orange. Press the TV/VIDEO button 2 repeatedly to select PC mode. Press the MENU button 3 ; the Main Menu screen will appear .
18 SETTING THE MENU (CONTINUED) PC SETUP (CONTINUED) Press the CHANNEL/Navigation UP 1 or DOWN 2 button until Phase is selected , then press the ENTER button 5 to select it. Set the desired phase using the VOLUME UP/Navigation Right 3 or VOLUME DOWN/Navigation Left 4 button.
19 SETTING THE SYSTEM AND SETTING THE CHANNELS INTO MEMOR Y Press the POWER button 1 to turn on the TV ; the POWER indicator will light orange. Press the TV/VIDEO button 2 repeatedly to select TV mode. Press the MENU button 3 ; the Main Menu screen will appear .
ADDING AND SKIPPING CHANNELS 20 After setting channels into memory , you can add or delete channels as follows: Press the POWER button 1 to turn on the TV ; the POWER indicator will light orange. Press the TV/VIDEO button 2 repeatedly to select the TV mode.
TV OPERA TION 21 Adjust the volume level by pressing the VOLUME UP/Navigation Right 1 or VOLUME DOWN/Navigation Left 2 button. The volume level will be indicated on the screen by a green bar . 3 For proper operation, before selecting channels, they must be set into the TV’s program memory, see page 19-20.
TV OPERA TION (CONTINUED) 22 MUTE JUMP Repeatedly press this button to cycle through the device(s) connected to the INPUT jacks (TV/CA TV , A V , S-Video, PC or CVI). NOTE: • For PC mode, if “No Signal” appears on the screen, please refer to “ COMPUTER CONNECTION” (see page 13).
23 TV OPERA TION (CONTINUED) INFO EARPHONE Press the INFO button once to show the mode (channel number if in TV/CA TV mode). Press a second time to clear the screen or wait three seconds and the screen will clear automatically . 1 For private listening, insert an earphone into the EARPHONE jack on the rear of the unit.
WHA T IS CLOSED CAPTIONING? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing-impaired viewers or it will translate and display text in another language.
M ain Menu Main Disp I mage Setup Audio Setup P C Setup TV Setup L anguage Recall Q uit I mage Setup Brightness C ontrast Sharpness T int Color Return Audio Setup T reble Bass B alance R eturn PC Setu.
26 SETTING V -CHIP (CONTINUED) Enter the V -CHIP menu screen as described on page 25 (Steps 1 & 2). M ain Menu Main Disp I mage Setup A udio Setup PC Setup TV Setup Language R ecall Q uit I mage S.
27 SETTING V -CHIP (CONTINUED) Enter the V -CHIP menu screen as described on page 25 (Steps 1 & 2). Main Menu M ain Disp Image Setup A udio Setup PC Setup T V Setup Language R ecall Quit Image Set.
28 Press the CHANNEL/Navigation UP 1 or DOWN 2 button until Set Password Option is selected and press the ENTER button 3 V Chip Control Set Password VChip Lock Class Optons M PAA Options Return MPAA O.
SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION POWER No power . The AC cord is not connected. Connect the AC cord properly . TV BROADCAST RECEPTION TV station experiencing problems. T ry another channel. Po o r o r n o p i ct u r e. Antenna/CA TV connector is not Check CA TV connection or VHF/UHF antenna.
RECEPTION DISTURBANCES 30 IGNITION: Black spots or horizontal streaks may appear , picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electric drills and other electric appliances. GHOSTS: Ghosts are caused by the television signal following two paths.
Power Source ......................................................................................................... AC 120V , 60Hz Max. Power Consumption ..............................................................................................
32 CARE AND MAINTENANCE T o prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. The finish on the receiver may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping the plastic parts.
Memcorp, Inc. Weston, FL Printed in T aiwan V isit our website at www .memorexelectronics.com.
Ein wichtiger Punkt beim Kauf des Geräts Memorex MLT1522 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Memorex MLT1522 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Memorex MLT1522 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Memorex MLT1522 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Memorex MLT1522 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Memorex MLT1522 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Memorex MLT1522 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Memorex MLT1522. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Memorex MLT1522 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
