Benutzeranleitung / Produktwartung 1130AG des Produzenten Melody Hi Fi
Zur Seite of 48
1 Quick Start Guide Cisco Aironet 1130AG Access Point Read This First Y ou should revie w this table and the instructions for opening the top cov er . The table contains important information you need to know so you can successfully conf igure your access point.
2 78-15955-02 Radio and IP Address Configuration The access point ships with its radio disabled.Y ou must enable them when you conf igure the access point for the f irst time. Also, the access point no longer is assigned an IP address. It is conf igured to obtain an IP address using a DHCP server .
3 Quick Start Guide Cisco Aironet 1130AG Access Point Note Status LED indications are not visible when the top cov er is open. Follo w these steps to open the top cover: 1. Put the access point on a f lat surface, and grasp it with both hands, as shown in this illustration.
4 78-15955-02 2. Gently push the cov er away from you until it stops, as sho wn in this illustration. 3. Remov e the opening instruction label from the top cover .
5 Quick Start Guide Cisco Aironet 1130AG Access Point Safety Information The FCC, with its action in ET Docket 96-8, has adopted a safety standard for human exposure to RF electromagnetic ener gy emitted by FCC-certif ied equipment.
6 78-15955-02 Warning This product must be connected to a Power-over -Ethernet (PoE) IEEE 802.3af compliant power source or an IEC60950 compliant limited power source. Warning In order to comply with FCC radio frequency (RF) exposure limits, antennas should be located a minimum of 7.
7 Quick Start Guide Cisco Aironet 1130AG Access Point Warning Read the installation instructions before you connect the system to its power source. Warning This product relies on the building’ s installation for short-circuit (overcurrent) protection.
8 78-15955-02 Note Conf iguring your access point using Cisco’ s Structured W ireless-A ware Network (SW AN) or Cisco’ s Wireless LAN Solution Engine (WLSE) is not cov ered in this guide. Refer to the appropriate SW AN or WLSE documentation for conf iguration information.
9 Quick Start Guide Cisco Aironet 1130AG Access Point This table lists documents related to the 1130A G series access point. These documents are on Cisco.com. Follo w these steps to access them: 1. Browse to http://www .cisco.com. 2. In the Quick Links section, click Products & Solutions .
10 78-15955-02 5. Scroll down to the Product Portfolio section of the page and f ind the W ireless LAN subsection. 6. Click Cisco Aironet 1130A G Series . A list of Cisco Aironet 1130A G Series Access Points documents appears. 7. Click the appropriate document.
11 Quick Start Guide Cisco Aironet 1130AG Access Point • This guide • Cisco product registration and Cisco documentation feedback cards Complete these steps to prepare for installation. 1. Carefully unpack and remov e the access point and hardware kit from the shipping box.
12 78-15955-02 1 Power connector 5 Padlock post 2 Ethernet port 6 Mode button 3 Ke yhole slot 7 Ethernet (E) and Radio (R) LEDs 4 Console port 8 Status LED 121541 6 8 4 5 1 2 3 7.
13 Quick Start Guide Cisco Aironet 1130AG Access Point Installation Summary Installing the access point in volves these operations: • Mounting the access point • Connecting power • Obtaining an .
14 78-15955-02 If you are not connected to a DHCP server , you can assign an IP address to the access point using the CLI. In this situation, obtain a unique IP address for your access point, a default gate way , and subnet mask from your network system administrator .
15 Quick Start Guide Cisco Aironet 1130AG Access Point Connecting Power Connect the 1130A G series access point to a power source. The access point can be powered locally by using an A C power module or ov er the Ethernet using power sourcing equipment (PSE).
16 78-15955-02 power up sequence is complete, the LED displays a light green color to indicate that it is ready for operation. When a client associates to the access point, the status LED changes to blue. The LED displays amber to indicate a problem, such as when the access point is unable to verify that the PSE is supplying suff icient power .
17 Quick Start Guide Cisco Aironet 1130AG Access Point Assigning an IP Address Using the CLI When you connect the access point to the wired LAN, the access point links to the network using a bridge virtual interface (BVI) that it creates automatically .
18 78-15955-02 Note If you are connected to the access point using a T elnet session you lose your connection to the access point when you assign a new IP address to the BVI. If you need to continue conf iguring the access point using T elnet, use the new IP address to open another T elnet session to the access point.
19 Quick Start Guide Cisco Aironet 1130AG Access Point Configuring Power After connecting the access point to a po wer source, its status LED might be amber , which can indicate that the access point is unable to verify that the PSE is supplying suff icient power .
20 78-15955-02 4. Scroll down to the System Po wer Settings section as shown in the following illustration: 5. Set the power settings and po wer injector f ields and verify your switch status as indicated in the power settings table. Note T o verify switch status, you will need to use the switch’ s CLI.
21 Quick Start Guide Cisco Aironet 1130AG Access Point Power Source System Power Settings Switch Status Cisco PSE supporting Cisco Intelligent Power Management feature 1 Power Settings: Po wer Negotia.
22 78-15955-02 6. Click Apply . The access point reboots conf igured with the power settings you specif ied. Note Y ou may hav e to refresh your browser screen to see the current status indicating that the access point’ s radios are enabled. Cisco Aironet Power Injector with a non-Cisco switch No conf iguration requirement 802.
23 Quick Start Guide Cisco Aironet 1130AG Access Point Configuring Basic Settings Before you can conf igure basic settings, the access point and your PC needs an IP address. See the “Obtaining an IP Address” section on page 16. Follo w these steps to conf igure basic settings for the access point using the GUI Express Setup page.
24 78-15955-02 4. If required, conf igure the power settings as described in the previous section. Otherwise, Click Express Setup . The Express Setup page appears.
25 Quick Start Guide Cisco Aironet 1130AG Access Point.
26 78-15955-02 5. Conf igure the settings using the following sections as a guide. Host Name The system name (system name) is a name for the access point that identif ies it on your network. Default: ap Configuration Server Protocol This setting specif ies how the access point obtains an IP address.
27 Quick Start Guide Cisco Aironet 1130AG Access Point IP Address This setting assigns or changes the access point IP address. If DHCP is enabled, the access point obtains its IP address from your network DHCP server . Y ou can assign a static IP address in this f ield.
28 78-15955-02 Web Server This setting specif ies the type of HTTP used to access the access point using a web browser . Options : Standard (HTTP) or Secure (HTTPS) Default: Standar d (HTTP) SNMP Comm.
29 Quick Start Guide Cisco Aironet 1130AG Access Point Radio 802.11G and 802.11A Setup Sections Note The following radio settings must be applied separately to each radio: Radio0—802.11G and Radio1—802.11A. Role in Radio Network This setting determines what function the access point performs in the wireless network.
30 78-15955-02 Optimize Radio Network For This setting optimizes the access point radio performance in the wireless network by adjusting data rates. This setting must match the setting on the clients. Options: Throughput, Range, Default, Custom Default : Default Option Description Throughput Maximizes data volume handled b ut might reduce range.
31 Quick Start Guide Cisco Aironet 1130AG Access Point Aironet Extensions By default, the access point uses Cisco Aironet 802.11 extensions to detect the capabilities of Cisco Aironet client devices and to support features that require specif ic interaction between the access point and associated client devices.
32 78-15955-02.
33 Quick Start Guide Cisco Aironet 1130AG Access Point Understanding Express Security Settings When the access point conf iguration is set to factory defaults, the f irst SSID that you create by using the Express Security page ov erwrites the default SSID, which has no security settings.
34 78-15955-02 Express Security Limitations Because the Express Security page is designed for simple conf iguration of basic security , the options av ailable are a subset of the access point security capabilities. Keep these limitations in mind when using the Express Security page: • Y ou cannot edit SSIDs.
35 Quick Start Guide Cisco Aironet 1130AG Access Point The Express Setup screen sections and conf igurable settings are identif ied and brief ly described below . SSID Configuration SSID The SSID is a unique identif ier that clients use to associate with the access point.
36 78-15955-02 VLAN A VLAN is a switched network that is logically segmented by functions, project teams, or applications rather than on a physical or geographical basis. Options: No VLAN, Enable VLAN ID (1–4095) Default: No VLAN Option Description No VLAN No VLANs are enabled.
37 Quick Start Guide Cisco Aironet 1130AG Access Point Security This setting identif ies the security settings available on the Express Security Setup page. Options: No Security , Static WEP Key , EAP Authentication, WP A Default: No Security Option Description No Security The least secure option.
38 78-15955-02 Note For detailed information about security and security settings, see the Cisco IOS Softwar e Conf iguration Guide for Cisco Air onet Access P oints.
39 Quick Start Guide Cisco Aironet 1130AG Access Point In Case of Difficulty If you followed the instructions in pre vious sections of this guide, you should hav e had no trouble getting your access point installed and running. If you do experience dif f iculty , the following sections provide basic troubleshooting information.
40 78-15955-02 Checking the Access Point LEDs If your access point is not working properly , check the Status LED on the top panel or the Ethernet and Radio LEDs in the cable bay area. Y ou can use the LED colors to assess the unit status. Note T o see the Ethernet and Radio LEDs you must open the access point cov er .
41 Quick Start Guide Cisco Aironet 1130AG Access Point For more details on these LED status codes, see the “T roubleshooting” chapter of the Cisco Air onet 1130A G Series Access P oint Hardwar e Installation Guide . Checking Basic Settings Mismatched basic settings are the most common causes of lost connectivity with wireless clients.
42 78-15955-02 SSID W ireless clients attempting to associate with the access point must use the same SSID as the access point. If a client device SSID does not match the SSID of an access point in radio range, the client device will not associate.
43 Quick Start Guide Cisco Aironet 1130AG Access Point If a wireless client cannot authenticate with your access point, contact the system administrator for proper security settings in the client adapter and for the client adapter driv er and f irmware versions that are compatible with the access point settings.
44 78-15955-02 3. Press and hold the MODE button while you reconnect po wer to the access point. 4. Continue pressing the MODE button until the Ethernet LED turns amber .
45 Quick Start Guide Cisco Aironet 1130AG Access Point 7. Click the Reset to Defaults button. Note If the access point is conf igured with a static IP address, the IP address does not change. 8. After the access point reboots, you must reconf igure it.
46 78-15955-02 Cisco One-Year Limited Hardware Warranty Terms There are special terms applicable to your hardware warranty and various services that you can use during the w arranty period. Y our formal W arranty Statement, including the warranties and license agreements applicable to Cisco software, is a vailable on Cisco.
47 Quick Start Guide Cisco Aironet 1130AG Access Point d. Read the document online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF). Note Y ou must hav e Adobe Acrobat Reader to view and print PDF f iles.
48 78-15955-02 Replacement, Repair, or Refund Policy for Hardware Cisco or its service center will use commercially reasonable efforts to ship a replacement part within ten (10) working days after receipt of a Return Materials Authorization (RMA) request.
Ein wichtiger Punkt beim Kauf des Geräts Melody Hi Fi 1130AG (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Melody Hi Fi 1130AG noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Melody Hi Fi 1130AG - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Melody Hi Fi 1130AG reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Melody Hi Fi 1130AG erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Melody Hi Fi 1130AG besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Melody Hi Fi 1130AG verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Melody Hi Fi 1130AG. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Melody Hi Fi 1130AG gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
