Benutzeranleitung / Produktwartung MB3201 des Produzenten McCulloch
Zur Seite of 24
® McCulloch Corporation P .O. Box 31567 • T ucson, AZ 85751-1567 U.S.A. McCulloch Corporation P. O . Box 31567 Tu c s on, AZ 85751-1567 USA McCulloch Canada 525 Southgate Drive - Unit #2 Guelph, ON N1G 3W6 Canada MEXICO Imported by / Importe par: Comercializadora Marvel S.
E N G L I S H PLEASE READ The W ARRANTY SYMBOL indicates that unless instructions or procedures are followed any damage caused will void the warranty and repairs will be at owner ’s expense. A CAUTION may also accompany the W ARRANTY SYMBOL . Service other than user maintenance should be performed by a McCulloch Authorized Service Center .
E N G L I S H PLEASE READ The W ARRANTY SYMBOL indicates that unless instructions or procedures are followed any damage caused will void the warranty and repairs will be at owner ’s expense. A CAUTION may also accompany the W ARRANTY SYMBOL . Service other than user maintenance should be performed by a McCulloch Authorized Service Center .
3 4 E N G L I S H * 3-1. WHA T T O DO READ YOUR USER MANUAL AND ALL SUPPLEMENTS (IF ANY ENCLOSED) THOROUGHL Y BEFORE OPER- A TING YOUR UNIT . 1. WEAR CLOSE FITTING, T OUGH WORK CLOTHING that will prov.
3 4 E N G L I S H * 3-1. WHA T T O DO READ YOUR USER MANUAL AND ALL SUPPLEMENTS (IF ANY ENCLOSED) THOROUGHL Y BEFORE OPER- A TING YOUR UNIT . 1. WEAR CLOSE FITTING, T OUGH WORK CLOTHING that will prov.
6 E N G L I S H 5. DUE TO THE DANGER of exhaust fumes, never operate blower in a confined or poorly ventilated area. 6. NEVER POINT BLOWER in the direction of people, animals, buildings, automobiles, or windows, etc. 7. DO NOT operate unit without inlet cover installed to prevent contact with impeller .
6 E N G L I S H 5. DUE TO THE DANGER of exhaust fumes, never operate blower in a confined or poorly ventilated area. 6. NEVER POINT BLOWER in the direction of people, animals, buildings, automobiles, or windows, etc. 7. DO NOT operate unit without inlet cover installed to prevent contact with impeller.
8 E N G L I S H 4-1. BLOWER A TT ACHMENT ASSEMBL Y INSTRUCTIONS 1. Twist blower nozzle (A) clockwise into the straight blower tube (B) until tight (Figure 4-1A). 2. Insert the straight blower tube (B) into the blower housing (C). Align tabs (D) on tube with grooves (E) in the housing (Figure 4-1B).
8 E N G L I S H 4-1. BLOWER A TT ACHMENT ASSEMBL Y INSTRUCTIONS 1. Twist blower nozzle (A) clockwise into the straight blower tube (B) until tight (Figure 4-1A). 2. Insert the straight blower tube (B) into the blower housing (C). Align tabs (D) on tube with grooves (E) in the housing (Figure 4-1B).
10 9 E N G L I S H 3. Hold inlet cover open. Insert tube aligning tabs (L) and notches (M). Turn clockwise to lock tube into position (Figure 4-3F) . 4. Install cover screw (K) through tube tab and into housing. Tighten screw (Figure 4-3G). 4-4. SIDE HANDLE (MB3201 Blower / Vac Model) 1.
10 9 E N G L I S H 3. Hold inlet cover open. Insert tube aligning tabs (L) and notches (M). Turn clockwise to lock tube into position (Figure 4-3F) . 4. Install cover screw (K) through tube tab and into housing. Tighten screw (Figure 4-3G). 4-4. SIDE HANDLE (MB3201 Blower / Vac Model) 1.
12 11 E N G L I S H 5-4. FUEL MIXING T ABLE 5-5. RECOMMENDED FUELS Some conventional gasolines are being blended with oxygenates such as alcohol or an ether compound to meet clean air standards. Y our McCulloch engine is designed to operate satisfactorily on any gasoline intended for automotive use including oxygenated gasolines.
12 11 E N G L I S H 5-4. FUEL MIXING T ABLE 5-5. RECOMMENDED FUELS Some conventional gasolines are being blended with oxygenates such as alcohol or an ether compound to meet clean air standards. Y our McCulloch engine is designed to operate satisfactorily on any gasoline intended for automotive use including oxygenated gasolines.
14 13 E N G L I S H 7. Once engine starts leave the choke in the ST ART “ ” position for 10 seconds, then move the choke to RUN “ ” position (Figure 6-1F). Squeeze trigger to release throttle lock. 8. If engine fails to start, repeat steps 1 through 7.
14 13 E N G L I S H 7. Once engine starts leave the choke in the ST ART “ ” position for 10 seconds, then move the choke to RUN “ ” position (Figure 6-1F). Squeeze trigger to release throttle lock. 8. If engine fails to start, repeat steps 1 through 7.
16 E N G L I S H 7-2. V ACUUM OPERA TIONS (MB3201 Blower / V ac Models only) Blower Units If your unit is vac-capable and was not equipped with a vacuum kit, a vacuum attach - ment accessory kit is available for purchase at your nearest McCulloch Authorized Service Center .
16 E N G L I S H 7-2. V ACUUM OPERA TIONS (MB3201 Blower / V ac Models only) Blower Units If your unit is vac-capable and was not equipped with a vacuum kit, a vacuum attach - ment accessory kit is available for purchase at your nearest McCulloch Authorized Service Center .
18 17 E N G 8-1. AIR FIL TER CAUTION NEVER operate blower without the air filter or dust and dirt will be sucked into the engine and damage it. The air filter must be kept clean.
18 17 E N G 8-1. AIR FIL TER CAUTION NEVER operate blower without the air filter or dust and dirt will be sucked into the engine and damage it. The air filter must be kept clean.
20 19 E N G L I S H 8-6. V ACUUM BAG CLEANING A dirty bag will obstruct airflow , thereby reducing vacuum efficiency . To Clean Bag: 1. Detach vacuum bag from unit. 2. Open zipper and remove contents. 3. Turn bag INSIDE OUT and shake vigorously . This procedure should be performed on a regular basis.
20 19 E N G L I S H 8-6. V ACUUM BAG CLEANING A dirty bag will obstruct airflow , thereby reducing vacuum efficiency . To Clean Bag: 1. Detach vacuum bag from unit. 2. Open zipper and remove contents. 3. Turn bag INSIDE OUT and shake vigorously . This procedure should be performed on a regular basis.
22 21 E N G 9. Store unit in a cool, dry place away from any source of ignition such as an oil burner , water heater , etc. 8-8. REMOVING A UNIT FROM ST ORAGE 1. Remove spark plug. 2. Pull starter rope briskly to clear excess oil from combustion chamber.
22 21 E N G 9. Store unit in a cool, dry place away from any source of ignition such as an oil burner , water heater , etc. 8-8. REMOVING A UNIT FROM ST ORAGE 1. Remove spark plug. 2. Pull starter rope briskly to clear excess oil from combustion chamber.
® McCulloch Corporation P .O. Box 31567 • T ucson, AZ 85751-1567 U.S.A. McCulloch Corporation P. O . Box 31567 Tu c s on, AZ 85751-1567 USA McCulloch Canada 525 Southgate Drive - Unit #2 Guelph, ON N1G 3W6 Canada MEXICO Imported by / Importe par: Comercializadora Marvel S.
Ein wichtiger Punkt beim Kauf des Geräts McCulloch MB3201 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie McCulloch MB3201 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für McCulloch MB3201 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von McCulloch MB3201 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über McCulloch MB3201 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon McCulloch MB3201 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von McCulloch MB3201 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit McCulloch MB3201. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei McCulloch MB3201 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
