Benutzeranleitung / Produktwartung 2008 3 4-DOOR des Produzenten Mazda
Zur Seite of 452
Black plate (1,1) Mazda3_8X41-EA-07F_Edition1 Page1 W ednesday , April 25 2007 1:4 PM Form No.8X41-EA-07F.
Black plate (2,1) Mazda3_8X41-EA-07F_Edition1 Page2 W ednesday , April 25 2007 1:4 PM Form No.8X41-EA-07F.
Black plate (3,1) Thank you for choosing a Mazda. W e at Mazda design and buil d vehicles with complete customer satisfaction in mind. T o help ensure enjoyable and trouble-free operation of your Mazda, read this manual carefully and follow its recommenda tions.
Black plate (4,1) W e want to help you get the most driving pleasure from your vehicle. Y our owner's manual, when read from cover to cover, can do that in many ways. Illustrations complement the words of the manual to best explain how to enjoy your Mazda.
Black plate (5,1) Mazda3_8X41-EA-07F_Edition1 Page5 W ednesday , April 25 2007 1:4 PM Form No.8X41-EA-07F T able of Contents Y our V ehicle at a Glance Interior , exterior views and part identification of your Mazda. 1 Essential Safety Equipment Use of safety equipment, including seats, seat belt system, child-restraint systems and SRS air bags.
Black plate (6,1) Mazda3_8X41-EA-07F_Edition1 Page6 W ednesday , April 25 2007 1:4 PM Form No.8X41-EA-07F.
Black plate (7,1) 1 Y our V ehicle at a Glance Interior , exterior views and part identification of your Mazda. Dashboard and Interior Overv iew ...... ..................................... ... 1-2 Exterior Overview ...................................
Black plate (8,1) *Refer to Navigation System at the separate manual (if equipped). Power window lock switch ........................................................ ........................ page 3-19 Power window switches .......... .................
Black plate (9,1) Headlight leveling switch .......................................................... ........................ page 5-52 Dashboard illumination knob ............................................... ............................. page 5-35 Lighting control/Turn signal .
Black plate (10,1) 4 Door 1-4 Y our V ehicle at a Glance The equipment and installation position varies by vehicle Exterior Overview Mazda3_8X41-EA-07F_Edition1 Page10 W ednesday , April 25 2007 1:4 PM Form No.
Black plate (11,1) T runk lid .............................. ................................................. ............................. page 3-14 Antenna .............................. .................................................. ..........
Black plate (12,1) 5 Door 1-6 Y our V ehicle at a Glance The equipment and installation position varies by vehicle Exterior Overview Mazda3_8X41-EA-07F_Edition1 Page12 W ednesday , April 25 2007 1:4 PM Form No.
Black plate (13,1) Liftgate .......................................... .................................................. ................... page 3-1 1 Rear window defros ter ................................... .......................................
Black plate (14,1) 1-8 Mazda3_8X41-EA-07F_Edition1 Page14 W ednesday , April 25 2007 1:4 PM Form No.8X41-EA-07F.
Black plate (15,1) 2 Essential Safety Equipment Use of safety equipment, including seats, seat belt system, child-restraint systems and SRS air bags. Seats .......................................................... ....................................
Black plate (16,1) Front Seats WARNING Do not modify or replace the front seats: Modifying or replacing the front seats such as replacing the upholst ery or loosening any bolts is da ngerous. The front seats contain air ba g components essential to the supplemental restrain t system.
Black plate (17,1) Always sit in a passenger seat properly with the seatback upright and feet on the floor: If your vehicle is equipped with front passenger seat weight sensors, sitting in the front p.
Black plate (18,1) q Height Adjustment (Driver's Seat) í By moving the seat lever up or down, the seat bottom height can be adjusted. Down Up q Lumbar Support Adjustment (Driver's Seat) í T o adjust the lumbar support, pull the lever forward.
Black plate (19,1) q Seat W armer í The front seats are electrica lly heated. The ignition switch must be in the ON position. Press the switch to turn the seat warmer on or off. When the switch is in the ON position, the indicator light will come on.
Black plate (20,1) Never allow a passenger to sit or stand on the folded seatback while the vehicle is moving: Driving with a passe nger on the folded seatback is dangerous. Allowing a child to sit up on the folded seatback while the vehicle is moving is particu larly dangerous.
Black plate (21,1) 1. Unfasten the lap portion of the center- rear seat belt (page 2-19). CAUTION Always unfasten the lap portion of the belt before foldin g the rear-left seatback. Leaving the lap portion of the belt fastened could cause damage to the seat belt, buckle and seatback.
Black plate (22,1) q Rear Seatback Lock (4 Door) T o lock or unlock a seatback, move the lever . NOTE The seatback locks are part of the trunk security system (page 3-15).
Black plate (23,1) q Armrest í The rear armrest in the center of the rear seatback can be used (no occupant in the center seat) or placed upright. Armrest Essential Safety Equipment Seats 2-9 í Some models. Mazda3_8X41-EA-07F_Edition1 Page23 W ednesday , April 25 2007 1:4 PM Form No.
Black plate (24,1) Seat Belt Precautions Seat belts help to decrease the possibility of severe injury during accidents and sudden stops. Mazda recommends that the driver and all passengers always wear seat belts. All of the seat belt retractors are designed to keep the lap/shoulder belts out of the way when not in use.
Black plate (25,1) WARNING Always wear your seat belt and make sure all occu pants are properly restrained: Not wearing a seat belt is extremely danger ous. During a collision, occupants not wearing seat belts could hit someone or things ins ide the vehicle or even be thrown out of the vehicle.
Black plate (26,1) CAUTION Belt retraction may become difficult if the belt s and rings are soiled, so try to keep them clean. For more details about cleaning the seat belts, refer to “ Cleaning the Lap/Shoulder Belt Webbin g ” (page 8-64).
Black plate (27,1) q Automatic Locking Mode Always use the automatic locki ng mode to keep the child-restraint system from shifting to an unsafe position in the event of an acciden t. T o enable seat belt automatic locki ng mode, pull it all the way out and connect it as instruct ed on the child-restraint syst em.
Black plate (28,1) Seat Belt (Except Center - Rear Position) NOTE When using the center-r ear seat belt, refer to “ Center-Rear Position Seat Belt ” (page 2-19). q Fastening the Seat Belt 1. Grasp the tongue. 2. Slowly pull out the lap/shoulder belt.
Black plate (29,1) q Unfastening the Seat Belt Depress the button on the buckle. If the belt does not fully retract, pull it out and check for kinks or twist s. Then make sure it remains untwisted as it retr acts. Button NOTE If a belt does not fully r etract, inspect it for kinks and twists.
Black plate (30,1) Front Seat Belt Pretensioner and Load Limiting Systems For optimum protection, the driver and front passenger seat belts are equipped with pretensioner and load limiting systems. For both these systems to work properly you must wear the seat belt properly .
Black plate (31,1) Have your seat belts changed immediately if the pretensioner or load limiter has been expende d: One or both front air bags may deploy, and the corresponding pretensioner(s) may also deploy at the same time.
Black plate (32,1) q Air Bag/Front Seat Belt Pretensioner System W arning Light If the air bag/front seat belt pretensioner system is working properly , the warning light illuminates when the ignition switch is turned to the ON position or after the engine is cranked.
Black plate (33,1) Center -Rear Position Seat Belt (3-Point T ype) Before using the center-rear lap/shoulder belt make sure tongue (A) and anchor buckle (B) are fastened. (A) (B) q Fastening the Seat Belt 1. Grasp the tongue (C). 2. Slowly pull out the lap/shoulder belt.
Black plate (34,1) q Unfastening the Seat Belt Depress the button on the buckle. If the belt does not fully retract, pull it out and check for kinks or twist s. Then make sure it remains untwisted as it retr acts. Button NOTE If a belt does not fully r etract, inspect it for kinks and twists.
Black plate (35,1) Sedan (Behind head restraint on left side) (A) (C) Hatchback (Left side of luggage compartment) (A) (C) T o pull out the seat belt, slide tongues with your finger, and slowly pull out the seat belt from the recess. NOTE Pulling out the seat belt all the way out will switch it to automatic locking mode.
Black plate (36,1) WARNING Do not use a seat belt extender unless it is necessar y: Using a seat belt extender when not necessary is danger ous. The sea t belt will be too long and not fit properly. In an accident, the seat belt will not provide adequate protec tion and you could be seriously injur ed.
Black plate (37,1) Seat Belt W arning Light/Beep The seat belt war ning light illuminates and a beep sound will be heard if the driver's seat belt is not fastened when the ignition switch is turned to the ON position.
Black plate (38,1) Driver seated/Front passenge r seated The seat belt warning funct ion reminds the front passenger to fasten the seat belt according to the chart below .
Black plate (39,1) Child Restraint Precautions Mazda strongly urges the use of child-restraint syst ems for children smal l enough to use them. Y ou are required by law to use a child-restraint system for children in the U.
Black plate (40,1) WARNING Use the correct size child-restraint system: For effective protection in vehicle accident s and sudden stops, a child must be properly restrained using a seat belt or child-restraint system depending on age and size. If not, the child could be seriously injured or even killed in an accident.
Black plate (41,1) Seating a child in a child -restraint system on the front passenger seat is dange rous: Vehicles equipped with front passen ger seat weight sensors are also equipped with a front passenger air bag deactivation indi cator light (page 2-33).
Black plate (42,1) Never use one seat belt on more than one person at a time: Using one seat belt for mor e than one person at a time is danger ous. A seat belt used in this way cannot spread the impact forces properly and the two passengers could be crushed tog ether and seriously inju red or even killed.
Black plate (43,1) Installing Child-Restraint Systems Accident statistics reveal that a child is safer in the rear seat. The front passenger's seat is clearly the worst choice for any child under 12, and wi th rear-facing child- restraint systems it is clear ly unsafe du e to air bags.
Black plate (44,1) 4. Push the child-restraint system firmly into the vehicle seat. Be sure the belt retracts as snugly as possible. Clicking from the retractor will be heard during retraction if the system is in the automatic locking mode. If the belt does not lock the seat down tight, repeat this step.
Black plate (45,1) T ether strap position (5 Door outboard position) Forward T ether strap Anchor bracke t location (5 Door cen ter position) T ether strap position (5 Door center position) T ether st.
Black plate (46,1) q If Y ou Must Use the Front Seat for Children If you cannot put all children in the rear seat, at least put the smallest children in the rear and be sure the largest child up front uses the shoulder belt over the shoulder .
Black plate (47,1) Do not allow a child to lean ove r or against the side window of a vehicle with side and cur tain air bags: It is dangerous to allo w anyone to lean over or against the side window,.
Black plate (48,1) With seat warmer Without seat warmer WARNING Do not seat a child in a child -restraint system on the front passenger seat if the front passenger air bag deactivation indicator light.
Black plate (49,1) LA TCH Child-Restraint Systems Y our Mazda is equipped with LA TCH lower anchors for attachment of speci ally designed LA TCH child-res traint systems in the rear seat. Both anchors must be used, otherwise the seat will bounce around and put the child in danger .
Black plate (50,1) q Child-Restraint System Insta llation Procedure (Rear Outboard Seats) 1. Make sure the seatback is secure ly latched by pushing it back until it is fully locked. 2. Expand the area between the seat bottom and the seatback slightly to verify the locations of the LA TCH lower anchors.
Black plate (51,1) T ether strap position (5 Door) Forward T ether strap WARNING Use the tether and tether anchor only for a child-restrain t system: Using the tether or tether anchor to secure anything but a child-restraint system is dangerou s. This could weaken or damage the tether or tether anchor and resu lt in injury.
Black plate (52,1) WARNING Use the tether and tether anchor only for a child-restrain t system: Using the tether or tether anchor to secure anything but a child-restraint system is dangerou s. This could weaken or damage the tether or tether anchor and resu lt in injury.
Black plate (53,1) Anchor bracket locat ion (5 Door) T ether strap position (5 Door) T ether strap Essential Safety Equipment Child Restraint 2-39 Mazda3_8X41-EA-07F_Edition1 Page53 W ednesday , April 25 2007 1:4 PM Form No.
Black plate (54,1) Supplemental Restraint Systems (SRS) Precautions The front and side supplementa l restraint systems (SRS) incl ude up to 6 air bags. Please verify which kinds of air bags are equipp ed on your vehicle by locating th e “ SRS AIRBAG ” location indicators.
Black plate (55,1) WARNING Seat belts must be worn in air bag equipped vehicles: Depending only on the air bags for protec tion during an accident is dangerous.
Black plate (56,1) Sit in the center of the seat and wear seat belts properly: Sitting too close to the side air bag modules or placing han ds on them is extre mely dangerous. The side air bags inflate with great force and speed directly out of the outboard side of the front seat and expand along the front doo r on the side the car is hit.
Black plate (57,1) Do not touch the components of the supplem ental restraint system after the air bags have inflated: Touching the components of the suppleme ntal restraint system after the air bags have inflated is dangerous. Immediately after inflation, they are very hot.
Black plate (58,1) Supplemental Restraint System Components The supplemental restraint systems (SRS) have tw o basic subsystems: l The air bag system with inflator s and air bags.
Black plate (59,1) q Front Air Bag System Components (1) (6) (10) (7) (6) (9) (5) (4) (3) (2) (8) (1) Driver seat slide position sensor (page 2-47) (2) Front seats (3) Front dual stage inflators and a.
Black plate (60,1) q Side and Curtain Air Bag System Components í 4 Door 5 Door (4) (1) (1) (3) (2) (3) (4) (1) (1) (2) (1) Side and curtain inflators and air bags (2) Front seats (3) Crash sensors and diagnostic module (SAS unit) (4) Side crash sensor 2-46 Essential Safety Equipment í Some models.
Black plate (61,1) How the Air Bags W ork q How the Front Air Bags W ork When air bag crash sensors detect a front al impact of greater than moder ate force, an electrical curren t is sent to the infl ators. Gases are produced to inflate the front air bags and after the inflation, the front air bags quickly deflate.
Black plate (62,1) Front passenger seat weight sensors V ehicles e quipped with front passenger seat weight sensors are also equipped with a front passenger air bag deactivation indicator ligh t is also equipped (page 2-33). These sensors are located under both of the front passenger seat rails.
Black plate (63,1) If the front passenger weight sensors are working properly , the indicator light illumi nates when the ignition switch is turned to the ON posit ion.
Black plate (64,1) WARNING Do not decrease the total seated weight on the pass enger seat: When an adult or large child sits on the front passenger seat, decreasing the total seated weight on the front passe nger seat from the total seated weight of approximately 42 kg (93 lb) required for air bag deploym ent is dangerous.
Black plate (65,1) Do not increase the total seated weight on the passen ger seat: When an infant or small child sits on the front passenger seat, increasing the total seated weight on the front passe nger seat from the total seated weight of approximately 30 kg (66 lb) is danger ous.
Black plate (66,1) NOTE l The system requir es about 10 seconds to alternate between turning the front passenger fr ont and side air bags and seat belt pr etensioner system on or off.
Black plate (67,1) q Air Bag Activation/Deactivation NOTE If the fr ont passenger seat weight sensors detect a total seated weight on the front passenger seat is less than appr oximately 42 kg (93 lb), the fr ont passenger fr ont and side air bags and seat belt pr etensioner may not deploy (page 2-47), but the curtain air bags may deploy .
Black plate (68,1) l Frontal offset impact to the vehicl e may not provide the stopping force necessary for air bag deploy ment. l Rear-ending or running under a truck's tail gate may not provide the stopp ing force necessary for air bag deployment.
Black plate (69,1) l Side impacts involving trees or poles can cause severe cosmetic damag e but may not have en ough impact force to activate the side and curtain air bags. l V ehicle roll-over may not provide enough side force to deploy the side and curtain air bags.
Black plate (70,1) The diagnostic module continuous ly monitors the system's readiness. This begins when the ignition switch is turned to the ON position and continues while the vehicle is being driven.
Black plate (71,1) l The air bag system warning beep sound will be he ard. l The air bags have deployed. l Front passenger air bag deactivation indicator light does not illuminate when the ignition switch is turned to the ON position or does not illuminate as indicated in the chart.
Black plate (72,1) NOTE If it becomes necessary to have the components or wiring system for the supplementary r estraint system modified to accommodate a person with certain medical conditions in accor dance with a certified physician, contact an Authorized Mazda Dealer , r efer to “ Customer Assistance (U.
Black plate (73,1) 3 Knowing Y our Mazda Explanation of basic operations and controls; opening/closing and adjustment of various parts. Doors and Locks .............................. ............................................. 3-2 Keys .............
Black plate (74,1) Keys WARNING Do not leave the keys in your vehicle with children and keep them in a place where your children will not find or play with them: Leaving children in a vehicle with the key is dangerous. This could resu lt in someone being badly injured or even killed.
Black plate (75,1) T o retract the key , rotate it into the holder while pressing the relea se button. Keyless Entry System í This system remotely locks and unlocks the doors and the liftgate. It can also help you signal for attention. Press the buttons slowly and carefully .
Black plate (76,1) q T ransmitter Integrated key type Lock button Unlock button Panic b utton Operation indicator light Non-key type Panic b utton Lock button Unlock button NOTE l (U.
Black plate (77,1) NOTE l All doors and the liftgate cannot be locked when any door or the liftgate is open and the key is in the ignition switch. l Confirm that all doors and the liftgate ar e locked visually or audibly by use of the double click.
Black plate (78,1) Replacing the transmitter battery Integrated key type 1. Unfold the key (page 3-2). 2. Insert a small screwdri ver into the slot and push the tab to remove the key from the transmitter . Ta b 3. Insert a small screwdri ver into the slot and gently pry open the trans mitter .
Black plate (79,1) Non-key type 1. Insert a small screwdri ver into the slot and gently pry open the trans mitter . Back cov er Slot 2. Press the portion of the battery indicated by A and remove the battery . A 3. Install a new battery (CR2025 or equivalent) into the front portion of the holder with the positive pole ( ) facing up.
Black plate (80,1) Door Locks WARNING Always take all child ren and pets with you or leave a responsible person with them: Leaving a child or a pet unattended in a parked vehicle is dangerous. In hot weather, temperatures inside a vehicle can become high enough to cause brain damage or even death.
Black plate (81,1) q Locking, Unlocking with T ransmitter í The doors can be locked/unlocked by operating the keyless entry syst em transmitter, refer to Keyless Entry System (page 3-3). q Locking, Unlocking with Door - Lock Knob T o lock any door from the inside, push the door-lock knob.
Black plate (82,1) Locking, unlocking with key All doors and the liftgate lock automatically when the driver's door is locked with the key . Al l doors and the liftgate unlock when the driver's door is unlocked and the key is held in the unlock position for one second or longer .
Black plate (83,1) Liftgate (5 Door) WARNING Never allow a person to ride in the luggage compar tment: Allowing a person to ride in the luggage compartment is danger ous. The person in the luggage compartment could be seriously injured or killed during sudden braking or a collis ion.
Black plate (84,1) NOTE If the vehicle battery is dead or there is a malfunction in the electrical system and the liftgate cannot be unlocked, perform the following procedur e as an emer gency measur e to unlock it: 1. Remove the cap on the interior surface of the liftgate with a flathead scr ewdriver .
Black plate (85,1) Luggage compartment cover strap The luggage compartment can be accessed by opening the liftgate when the straps are attached to the sides of the liftgate. Strap Luggage compartment cover The luggage compartment can be accessed by opening the luggage compartment cover from the inside of the vehicle.
Black plate (86,1) T runk Lid (4 Door) WARNING Never allow a person to ride in the trunk: Allowing a person to ride in the trunk is dangerous. In addition , the person in the trunk could be seriou sly injured or killed during sudden braking or a collis ion.
Black plate (87,1) Opening the trunk lid with the key Insert the key into the slot and turn it clockwise. Open Opening the trunk lid with the remote release lever Pull up the release lever next to the driver's seat. Release lev er Closing the trunk lid Use both hands to push the trunk lid down until the lock snaps shut.
Black plate (88,1) NOTE T o prevent the battery fr om being discharged, do not leave the trunk open for a long period when the engine is not running. Inside T runk Release Lever (4 Door) Y our vehicle.
Black plate (89,1) WARNING Close the trunk lid, lock the rear seatbacks and do not allow children to play inside the vehicle: Leaving the trunk lid open or leaving children in the vehicle with the keys is dangerous. Children could open the trunk lid and climb inside resulting in possible injury or death from heat exposure.
Black plate (90,1) Power Windows í The ignition switch must be in the ON position for the powe r windows to operate. WARNING Make sure the opening is clear befor e closing a window: Closing power windo ws are dangerous. A perso n's hands, head, or even neck could be caught by the window and resul t in serious injur y or even death.
Black plate (91,1) q Operating the Passenger Power Windows The power window s may be operated when the power window lock switch on the driver's door is in the unlocked position. The passenger window s may be op ened or closed by the power window master control switches on the driver's door .
Black plate (92,1) Fuel-Filler Lid and Cap WARNING When removing the fuel cap, loosen the cap slightly and wait for any hissing to stop. Then remove it: Fuel spray is dangerous. Fuel can burn skin and eyes and cause illness if ingested. Fuel spra y is released when there is pressure in the fuel tank and the fuel cap is removed too quickly.
Black plate (93,1) q Fuel-Filler Cap T o remove the filler cap, turn it counterclockwise. T o close the filler cap, turn it clockw ise until two or more clicks are heard. Open Close CAUTION Make sure the fuel-filler cap is tightened securely . The check engine light may illuminate when the cap isn't tightened securely.
Black plate (94,1) 2. (T ype A) Insert your hand into the hood opening and slide the hood latch to the left and lift the hood. (T ype B) Insert your hand into the hood opening and slide the hood latch to the right and lift the hood. T ype A T ype B 3.
Black plate (95,1) Moonroof í The moonroof can be opened or closed electrically only when the igni tion switch is in the ON position. T ilt switch Slide switch WARNING Do not let passengers stand up .
Black plate (96,1) T o close to the desired position , push the front of the tilt or sli de switch. Close Close Open q Sunshade The sunshade can be opened and closed by hand. The sunshade opens automatically when the moonroof is opened, but must be closed by hand.
Black plate (97,1) Immobilizer System The immobilizer system allows the engine to start only with a key the system recognizes. If someone attempts to start the engine with an unrecognized key , the eng ine will not start, thereby helping to prevent the theft of your vehicle.
Black plate (98,1) NOTE l (U.S.A.) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference r eceived, including interference that may cause undesir ed operation.
Black plate (99,1) q Maintenance If you have a problem with the immobilizer system or the key , consult an Authorized Mazda Dealer . NOTE l The keys carry a unique electr onic code. For this r eason, and to assur e your safety , obtaining r eplacement key requir es some waiting time.
Black plate (100,1) q How to Arm the System 1. Remove the key from the ignition switch. 2. Make sure the hood is closed . Close and lock all doors and the liftgate/trunk lid from the outside using the key . If you have the keyless entry system, press the lock button on the trans mitter .
Black plate (101,1) Steering Wheel WARNING Never adjust the steering wheel while the vehicle is moving: Adjusting the steering wheel while the vehicle is moving is dangerous. Moving it can very easily cause the driver to abrup tly turn to th e left or right.
Black plate (102,1) 2. Depress the mirror switch in the appropriate direction. Mirror switch Outside mirror Selector switch After adjusting the mirror, lock the control by moving the selec tor switch to the middle position. Manual control mirror T o adjust, move the mirror's contr ol lever, just inside the door .
Black plate (103,1) T ype A T ype B Reducing glare from headlights Adjust the mirror wi th the day/night lever in the day position. Push the lever forward for day driving.
Black plate (104,1) 3-32 Mazda3_8X41-EA-07F_Edition1 Page104 W ednesday , April 25 2007 1:4 PM Form No.8X41-EA-07F.
Black plate (105,1) 4 Before Driving Y our Mazda Important information about driving your Mazda. Fuel and Engine Exhaust Precautions ........ ................................ 4-2 Fuel Requirements .............................. .......................
Black plate (106,1) Fuel Requirements V ehicles wi th catalytic convert ers or oxygen sensors must use ONL Y UNLEADE D FUEL, which will reduce exhaust emissions and keep spark plug fouling to a minimum. 2.3-liter turboc harger engine Y our Mazda will perform best with fuel listed in the table.
Black plate (107,1) V ehicle damage and drivability problems resul ting from the use of the following may not be covered by the Mazda warranty . l Gasohol containing more than 10% ethanol. l Gasoline or gasohol c ontaining methanol. l Leaded fuel or leaded gasohol.
Black plate (108,1) Emission Control System Y our vehicle is equipped with an emission con trol system (the catalytic convert er is part of this system) that enables your vehicl e to comply with existing exhaust emissions requirements.
Black plate (109,1) Engine Exhaust (Carbon Monoxide) WARNING Do not drive your vehicle if you smell exhaust gas inside the vehicle: Engine exhaust gas is dangerous. This gas contain s carbon monoxide (CO), which is colorless, odorless, and pois onous.
Black plate (1 10,1) Before Getting In l Be sure the windows, outside mirrors, and outside lights are clean. l Inspect inflation press ures and condition of tires. l Look under the vehicl e for any sign of fluid leaks. l If you plan to back up, make sure nothing is in your way .
Black plate (11 1,1) Break-In Period No special break-in is necessary , but a few precautions in the first 1, 000 km (600 miles) may add to the perfor mance, economy , and life of your Mazda. l Don't race the engine. l Don't maintain one constant speed, either slow or fast, for a long period of time.
Black plate (1 12,1) Hazardous Driving WARNING Be extremely careful if it is necessar y to downshift on slipper y sur faces: Downshifting into lower gear while driving on slippery surface s is dangerous. The sudden change in tire speed could ca use the tires to skid.
Black plate (1 13,1) Rocking the V ehicle WARNING Do not spin the wheels at more than 56 km/h (35 mph), and do not allow anyone to stand behind a wheel when pushing the vehicle: When the vehicle is stuck, spinning the wheels at high spe ed is dangerous.
Black plate (1 14,1) WARNING Use only the same size and type tire s (snow, radial, or non-radial) on all four wheels: Using tires different in size or type is dangerous. Your vehicle's han dling could be greatly affect ed and result in an accident.
Black plate (1 15,1) Driving In Flooded Area WARNING Dry wet bra kes by driving ver y slowly and applying the brakes lightly until brake per formance returns to normal: Driving with wet brakes is dangerous. Increase d stopping distance or the vehicle pulling to one side when braking could result in a serious accident.
Black plate (1 16,1) T urbocharger Information í The turbocharger greatly enhances engine power . Its advanced design provides imp roved operation and requires minim um additional mai ntenance.
Black plate (1 17,1) T railer T owing The Mazda3 is not designed for towing. Never tow a trailer with your Mazda3. Before Driving Y our Mazda T owing 4-13 Mazda3_8X41-EA-07F_Edition1 Page1 17 W ednesday , April 25 2007 1:4 PM Form No.
Black plate (1 18,1) 4-14 Mazda3_8X41-EA-07F_Edition1 Page1 18 W ednesday , April 25 2007 1:5 PM Form No.8X41-EA-07F.
Black plate (1 19,1) 5 Driving Y our Mazda Explanation of instruments and controls. Starting and Driving ................................................................... .. 5-2 Ignition Switch .......................................... ............
Black plate (120,1) Ignition Switch q Ignition Switch Positions LOCK The steering wheel locks to prote ct against theft. Only in this position can the key be removed. Manual transaxle T o turn the key from the ACC to the LOCK position, push the button when the key is at the ACC position, then turn the key to the LOCK position .
Black plate (121,1) WARNING Remove the key only when the vehicle is parked: Removing the key from the igni tion switch while the vehicle is moving is dangerous. Removing the key allows the steering wheel to lock. You will lose steering control and a serious accident could occur.
Black plate (122,1) Starting the Engine NOTE Engine-starting is contr olled by the spark ignition system. This system meets all Canadian Interference- Causing Equipment Standar d r equir ements r egulating the impulse electrical field strength of radio noise.
Black plate (123,1) Brake System q Foot Brake Y our Mazda has power-assisted brakes that adjust automatically throu gh normal use. Should power-assist fail, you can stop by applying greater force than normal to the brake pedal. But the distance required to stop will be greater than usual .
Black plate (124,1) q Parking Brake WARNING Before leaving the driver's seat, alw ays put the key to LOCK position, set the parking brake and ma ke sure the shift lever is in P with an automatic .
Black plate (125,1) q Brake System W arning Light This warning has the following functions: Parking brake warning The light comes on when the parking brake is applied with the igni tion switch in the ST ART or ON position. It goes off when the parking brake is full y released.
Black plate (126,1) WARNING Do not rely on ABS as a substitute for safe driving: The ABS canno t compensate for unsafe and reckless driving, excessive speed, tailgating (followi ng another vehicle too closely), drivi ng on ice and snow, and hydroplanin g (reduced tire friction and road contact because of water on the road sur face).
Black plate (127,1) WARNING Do not drive with both the ABS warning light and brake warning light illuminated. Have the vehicle towed to an Authorized Mazda Dealer to have the brakes inspected as soon as possible: Driving when the brake system warning light and ABS warning light are illuminated at the same time is dangerous.
Black plate (128,1) (6-speed transaxle) V ehicles wi th 6-speed transaxle are equipped with a device to prevent shiftin g to R (reverse) by mistake. Pu sh the shift lever downward and shift to R.
Black plate (129,1) Downshifting When you must slow down in heavy traffic or on a steep upgrade , downshift before the engine star ts to overwork. This reduces the chance of stal ling and gives better acceleration when you need more speed. On a steep downgr ade , downshifting helps maintain safe speed and prolongs brake life.
Black plate (130,1) Automatic T ransaxle Controls Indicates that you must depress the brake pedal to shift (The ignition switch must be in the ON position).
Black plate (131,1) q T ransaxle Ranges The shift lever must be in P or N to operate the starter . P (Park) P locks the transaxle and prevents the front wheels from rotating.
Black plate (132,1) q Shift-Lock System The shift-lock system prevents shifting out of P unless the brake pedal is depressed. T o shift from P: 1. Depress and hold the brake p edal. 2. Start the engine. 3. Move the shift lever . NOTE l When the ignition switch is in the ACC or LOCK position, the shift lever cannot be shifted from P .
Black plate (133,1) Indicators Shift position indicator In manual shift mode, the “ M ” of the shift position indicator in the inst rument panel illuminates.
Black plate (134,1) Manually Shifting down (M5 * → M4 → M3 → M2 → M1) T o shift down to a lower gear, tap the shift lever forward ( ) once. * 2.
Black plate (135,1) Shifting down If the vehicle speed is higher than the speed specified for each gear, the gear cannot be shifted down to a lower gear .
Black plate (136,1) (2.3-liter engine model) Gear V ehicle speed M1 to M2 24 km/h (15 mph) M2 to M3 40 km/h (25 mph) M3 to M4 65 km/h (40 mph) M4 to M5 73 km/h (45 mph) Downshifting When you must slow down in heavy traffic or on a steep upgrade , downshift before the engine star ts to overwork.
Black plate (137,1) If the light stays illuminated after the engine is started or illumi nates while driving, turn off the engine after parking in a safe place, and then start the engine again. If the light does not illuminate after restarting the engine, this indicates that the power steering is restored and normal steering is possible.
Black plate (138,1) q Activation/Deactivation T o activate the system, press the ON/OFF switch. The cruise main indicator ligh t illuminates. T o deactivate the system, press the switch again.
Black plate (139,1) q T o Increase Cruising Speed Follow either of these procedures. T o increase speed using cruise control switch Press the RES/ACCEL butto n and hold it. Y our vehicle will accelerate. Release the button at the speed you want. Y our vehicle has a tap-up feature that allows you to increase your current speed in increments of 1.
Black plate (140,1) Y our vehicle has a tap-down feature that allows you to decrease your current speed in decrements of 1.6 km/h (1 mph) by a momentary tap of the SET/COAST button. Multiple taps will decrease your vehicle speed 1.6 km/h (1 mph) for each tap.
Black plate (141,1) T raction Control System (TCS) í The T raction Control System (TCS) enhances traction and safety by controlling engine torque and braking. When the TCS detects driving wheel slippage, it lowers engine torqu e and operates the brakes to prevent loss of traction.
Black plate (142,1) Dynamic Stability Control (DSC) í The Dynamic Stability Control (DSC) automatically controls braki ng and engine torque in conjunction with syst ems such as ABS and TCS to he lp control side slip when driving on slippery surfa ces, or during sudden or evasi ve maneuvering, enhancing vehicle safety .
Black plate (143,1) q DSC OFF Indicator Light This indicator light stays on for a few seconds when the ignition switch is turned to the ON position. It also comes on when the DSC OFF switch is pressed and TCS/ DSC is switched off (page 5-25).
Black plate (144,1) Tir e Pressur e Monitoring System í The tire pressure monitoring system (TPMS) monitors the pressure for each tire. If tire pressure is too low in one or more tires, the system will inform the driver via the warning light in the instrument panel and by the warning beep sound.
Black plate (145,1) CAUTION Ø Each tire, including the spare (if provided), shou ld be checked monthly when cold and inflated to the inflation pressure recomm ended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label.
Black plate (146,1) q Tir e Pressure Monitoring System W arning Light This warning light illuminates for a few seconds when the ignition switch is turned to the ON position. Thereafter, the warning light illuminates and a beep is heard when tire pressure is too low in one or more tires, and flashes when there is a system malfunction.
Black plate (147,1) Adjust the tire pressure to the correct tire pressure. Refer to the specification charts (page 10-8). CAUTION When replacing/repai ring the tire s or wheels or both, have the work done by an Authorized Mazda Deal er, or the tire pressure sensors may be damaged.
Black plate (148,1) If the warning light illuminate s again even after the tire pressures are adjusted, there may be a tire puncture. Replace the punctured tire with the tem porary spare tire (page 7-8). NOTE A tire pr essure sensor is not installed to the temporary spare tire.
Black plate (149,1) When changing tires you rself If you or someone else changes tires, you or someone else can also undertake the steps for the TPMS to complete the ID signal code registration. 1. After tires have been changed, turn the ignition switch to the ON position , then turn it back to the ACC or LOCK position.
Black plate (150,1) Meters and Gauges (Black-out meter) When the ignition switch is in the ON position, the dashboard gauges illuminate. Speedometer .................... .................................................. ............................. .
Black plate (151,1) q Speedometer The speedometer indicates the speed of the vehicle. q Odometer , T rip Meter and T rip Meter Selector The display mode can be changed between trip meter A and tri p meter B by pressing the selector while one of them is displayed.
Black plate (152,1) Odometer The odometer record s the total distance the vehicle has been driven. T rip meter The trip meter can record the tota l distance of two trips.
Black plate (153,1) CAUTION Driving with an overheated engine can cause serious engine damage (page 7-14). q Fuel Gauge The fuel gauge shows approximately how much fuel is in the tank. W e recommend keeping the tank over 1/4 full. When the low fuel warning light illuminates or when the needle is near E, refuel as soon as possible.
Black plate (154,1) Adjusting the instrument cluster illumination intens ity (With exterior lights off) When the exterior lights are off, the instrument cluster illuminati on can be adjusted to one of five levels by successively pressing the instrument cluster dimmer selec t button.
Black plate (155,1) W arning/Indicator Lights W arning/Indicator lights will appear in any of the highlighted areas Signal W arning/Indicator Lights Page Brake System W arning Light 5-39 Charging Syst.
Black plate (156,1) Signal W arning/Indicator Lights Page Seat Belt W arning Light/Beep 5-42 Door-Ajar W arning Light 5-43 Low W asher Fluid Level W arning Light 5-43 Automatic Transaxle W arning Ligh.
Black plate (157,1) q Brake System W arning Light This warning has the following functions: Parking brake warning The light comes on when the parking brake is applied with the igni tion switch in the ST ART or ON position. It goes off when the parking brake is full y released.
Black plate (158,1) NOTE When the engine is jump-started to char ge the battery , uneven rpm occurs and the ABS warning light comes on. This is due to a weak battery , not a malfunction.
Black plate (159,1) If the light illumi nates while drivi ng: 1. Drive to the side of the road and park off the right-of-way on level ground. 2. T urn off the engine and wait 5 minutes for the oil to drain back into the oil pan. 3. Inspect the engine oil level (page 8-20).
Black plate (160,1) WARNING Never tampe r with the air bag/ pretensioner systems and always have an Authorized Mazda Dealer per form all servicing and repa irs: Self-ser vicing or tampering with the systems is dangerous. An air bag/ pretensioner could accide ntally activate or become disabled causing serious injury or death.
Black plate (161,1) Once the beep sound is heard, it continues sounding even if the vehicle speed lowers to 20 km/h (12 mph) or less until the seatbelt is fastened or the be ep sound period has passed.
Black plate (162,1) q Automatic T ransaxle W arning Light This warning light stays on for a few seconds when the ignition switch is turned to the ON position. The light illuminates when the transaxle has a problem. CAUTION If the automatic transaxle warning light illuminates, the transaxle has an electrical prob lem.
Black plate (163,1) Adjust the tire pressure to the correct tire pressure. Refer to the specification charts (page 10-8). CAUTION When replacing/repai ring the tire s or wheels or both, have the work done by an Authorized Mazda Deal er, or the tire pressure sensors may be damaged.
Black plate (164,1) If the warning light illuminate s again even after the tire pressures are adjusted, there may be a tire puncture. Replace the punctured tire with the tem porary spare tire (page 7-8). NOTE A tire pr essure sensor is not installed to the temporary spare tire.
Black plate (165,1) Gear position indicator When the shift lever is in the D or M position, the numeral for the selected gear displays. q TCS/DSC Indicator Light í This indicator light stays on for a few seconds when the ignition switch is turned to the ON position.
Black plate (166,1) q Power Steering Malfunction Indicator Light í This indicator light illumina tes when the ignition switch is turned to the ON position and goes off when the engine is started.
Black plate (167,1) Beep Sounds q Air Bag/Front Seat Belt Pretensioner System W arning Beep If a malfunction is detected in both the air bag/front seat belt pretensioner system and the warning light, a warning beep sound will be he ard for about 1 minute.
Black plate (168,1) Lighting Control q Headlights T ype A (Without AUTO po sition) T urn the headlight switch to turn the headlights, other exterior lights and dashboard illumination on or off.
Black plate (169,1) CAUTION Ø Do not shade the light sensor by adhering a sticker or a label on the windshield. Otherwise the light sensor will not operate correctly. Light sensor Ø The light sensor also works as a rain sensor for the auto-wiper control.
Black plate (170,1) NOTE If the headlights flicker , or the brightness weakens, the bulb-life may be depleted and a r eplacement is necessary . Consult an Authorized Mazda Dealer . q Lights-On Reminder If lights are on and the key is removed from the ignition switch, a continuous beep sound will be heard when the driver's door is opened.
Black plate (171,1) Without turbocharger Front seat Rear seat Load Switch Position Driver Passenger × ―― ― 0 ×× ―― 0 ×× × ― 1 ×× × × 2 × ―― ×3 ×: Y es ― :N o With turboc.
Black plate (172,1) Fog Lights í The fog lights help you to see as well as to be seen. The headlights must be turned on to turn on the front fog lights.
Black plate (173,1) q Windshield W ipers T ype A (With INT position) T urn the wipers on by pulling the lever down. INT ― Intermittent 1 ― Low speed 2 ― High speed For a single wiping cycle, push the lever up to . ― Mist V ariable-speed intermitt ent wipers í Set the lever to INT and choose the interval timing by rotating the ring.
Black plate (174,1) The sensitivity of the rain sensor can be adjusted by turning the switch on the wiper lever . From the center position (norm al), turn the switch towards (+) for higher sensitivity (faster response) or turn the switch towards ( _ ) for less sensi tivity (slower response).
Black plate (175,1) NOTE l The auto-wiper control may not operate when the rain sensor temperature is about _ 10 °C(14 °F) or lower , or about 85 °C (185 °F) or higher .
Black plate (176,1) Rear Window Wiper and W asher (5 Door) The ignition switch must be in the ON position. q Rear Window Wiper T urn the wiper o n by turning the rear wiper/washer switch. ON ― Normal INT ― Intermittent q Rear Window W asher T o spray washer fluid, turn the rear wiper/ washer switch to the position.
Black plate (177,1) Fully Automatic T ype Air-Conditioning Indicator light CAUTION Don't use sharp ins truments or window cleaners with abrasives to clean the inside of the rear window surface . They may damage th e defroster grid insi de the window.
Black plate (178,1) Hazard W arning Flasher The hazard warning lights shoul d always be used when you stop on or near a roadway in an emergency . The hazard warning lights war n other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it.
Black plate (179,1) 6 Interior Comfort Use of various features for drive comfort, including air-conditioning and audio system. Climate Control System .............................. ................................. 6-2 Operating Tips .................
Black plate (180,1) Operating Tips q Operating the Climate Control System Operate the climate control system with the engine running. NOTE T o prevent the battery fr om being discharged, do not leave the fan contr ol dial on for a long period of time with the ignition switch in the ACC position when the engine is not running.
Black plate (181,1) V ent Operation Center vents Side vents q Adjusting the V ents Directing airflow Side V ents T o adjust the direction of airf low , open the vents and rotate them left and right. Push Center V ents T o adjust the direction of airf low , move the adjustment knob.
Black plate (182,1) q Selecting the Airflow Mode Floor V ents Dashboard and Floor V ents Dashboard V ents Defroster and Floor V ents Defroster V ents 6-4 Interior Comfort Climate Control System Mazda3_8X41-EA-07F_Edition1 Page182 W ednesday , April 25 2007 1:5 PM Form No.
Black plate (183,1) T ypes of the Climate Control System Manual type and fully automatic type climate control systems are explained separately . Check your vehicle's climate control type and read the appropriate pages. Manual T ype ..............
Black plate (184,1) Manual T ype í Air intake selector A/C switch Mode selector dial Temperature control dial Fan control dial Some models. q Control Switches T emperature control dial Cold Hot This dial controls tem perature. Turn it clockwise for hot and counterclockwise for cold.
Black plate (185,1) Mode selector dial T urn the mode selector dial to select airflow mode (page 6-4). NOTE l If you want to slightly adjust the airflow amount, set the mode selector dial at . l For example, when the mode selector dial is at the position between the and positions, airflow from the floor vent is less than that of the position.
Black plate (186,1) This mode can be used when driving on a dusty road or in simil ar conditions. It also helps to provide quicker cooling of the interior . WARNING Do not use the recirculated air mode in cold or rainy weather: Using the recirculated air mode in cold or rainy weather is dangerous as it will cause the windows to fog up.
Black plate (187,1) q V entilation 1. Set the mode selector dial to the position. 2. Set the air intake selector to the outside air mode. 3. Set the temperature control dial to the desired position. 4. Set the fan control dial to the desired speed. q Windshield Defrosting and Defogging 1.
Black plate (188,1) Fully Automatic T ype í Climate control infor mation is displayed on the information display . AMB (Ambient Temperature) switch Windshield defroster switch Fan control dial Temper.
Black plate (189,1) OFF switch Pressing the OFF switch shuts off the climate control system. T emperature control dial Cold Hot This dial controls temperatu re.T urn it clockwise for hot and counterclockwise for cold. Fan control dial Slow Fast The fan has seven speeds.
Black plate (190,1) Air intake selector Outside or recirculated air position s can be selected. Press the switch to select outside/recirculated air p ositions.
Black plate (191,1) 2. Use the temperature contr ol dial to select a desired temperature. Cold Hot T o turn off the syst em, press the OFF switch. NOTE l Setting the temperature to maximum high or low will not provide the desir ed temperature at a faster rate.
Black plate (192,1) Interior temperature sensor 6-14 Interior Comfort Climate Control System Mazda3_8X41-EA-07F_Edition1 Page192 W ednesday , April 25 2007 1:5 PM Form No.
Black plate (193,1) Antenna q Detachable T ype T o remove the antenn a, turn it counterclockwise. T o install the antenna, turn it clockw ise. Make sure the antenna is securely installed.
Black plate (194,1) Operating Tips for Audio System WARNING Do not adjust the audio control switches while driving the vehicle: Adjusting the audio while driving the vehicle is dangerou s as it could distract your attention from the vehicle operation which could lead to a serious accident .
Black plate (195,1) Signals from an FM transmi tter are similar to beams of light because they do not bend around corners, but they do reflect. Unlike AM signals, FM signa ls cannot travel beyond the horizon. Therefor e, FM stations cannot be received at the great distances possible wi th AM reception.
Black plate (196,1) Strong signal noise This occurs very close to a transmitter tower . The broadcast signals are extremely strong, so the result is noise and sound breakup at the radio receiver .
Black plate (197,1) l If the cassette tape is loose, it may produce poor sound or performance during playback. Use a pencil or something similar to remove any slack. l Only cassette tapes that play no longer than 90 minutes should be used. Cassette tape exceeding 90 min utes are thin and may easily break.
Black plate (198,1) l The CD revolves at high speed within the unit. Defective (cracked or badly bent) CDs should never be used. l Do not use non-conventi onal discs such as heart-shaped, octagonal discs, etc. The disc may not eject resul ting in a malfunction.
Black plate (199,1) CD Player In-dash CD Changer l Be sure never to touch the signa l surface when handling the CDs. Pick up a CD by grasping the outer edge or the edge of the hole and the outer edge. l Do not stick paper or tape on the CD. A void scrat ching the reverse side (the side without a label).
Black plate (200,1) Handling the In-dash CD changer l This unit may not be able to play certain CD-R/CD-R Ws made using a computer or music CD recorder due to disc characteristics, scratches, smudges, dirt, etc., or due to dust o r condensation on the lens inside the unit.
Black plate (201,1) l If a disc has both music data (CD-DA) and MP3 files, playback of the two file types differs depending on how the disc was recorded. l Packet written discs cannot be played on this unit. l This unit does not play CDs recorded using MP3i (MP3 interactive), MP3 PRO and RIFF MP3 formats.
Black plate (202,1) l MP3 files not conforming to the MP3 format containing both header frames and data frames will be skipped and not played. l This unit will play MP3 files that have up to eight levels. However, the more levels a disc has, the longer it will take to initially start playing.
Black plate (203,1) Sampling Refers to the process of encoding analog audio data at regular intervals and converting it to digi tal data. The sampling rate refers to the number of times a sample is taken in one second and is expressed in Hz units. Increas ing the sampling rate improves the sound quality but also increases the data size.
Black plate (204,1) MEMO 6-26 Mazda3_8X41-EA-07F_Edition1 Page204 W ednesday , April 25 2007 1:5 PM Form No.8X41-EA-07F.
Black plate (205,1) Audio Set l Audio information is displ ayed on the information display . l There are two types of In-dash CD changers. Check which In-dash CD changer your vehicle is equipp ed with. CD Player Cassette T ape Player Illustration is of a representativ e audio unit.
Black plate (206,1) q Power/V olume/Sound Controls Audio control dial Power/V olume dial Power ON/OFF T urn the ignition switch to the ACC or ON position. Press the power/volume dial to turn the audio system on. Press the power/volume dial ag ain to turn the audio system off.
Black plate (207,1) 2. T urn the audio control dial to ad just the selected functions as foll ows: Indication T urn Left T urn Right Select mode Decrease bass Increase bass Decrease treble Increase tr.
Black plate (208,1) q Operating the Radio Seek tuning buttons Channel preset buttons Manual tuning button/Auto memory button/Electric serial number b utton Scan button Band selector buttons Satellite button Radio ON Press a band selector button ( )t o turn the radio on.
Black plate (209,1) NOTE If you continue to press and hold the button, the fr equency will continue changing without stopping. Scan tuning Press the scan button ( )t o automatically sample strong stations . Scanning stops at each station for about 5 seconds.
Black plate (210,1) 1221 A venue Of The Americas New Y ork, NY 10020 Attention: Customer Care Include your Sirius Radio ESN (Electronic Serial Number) when subscribing or requesting techni cal assistance.
Black plate (211,1) MEMO 6-33 Mazda3_8X41-EA-07F_Edition1 Page21 1 W ednesday , April 25 2007 1:5 PM Form No.8X41-EA-07F.
Black plate (212,1) q Operating the Cassette T ape Player í Fast-forward button Rewind button APC button: (next program) (one being played) Repeat button Cassette tape play button Program button Dolb.
Black plate (213,1) Fast-forward/Rewind Press the fast-forward button ( )t o fast-forward. Press the rewind button ( ) to rewind. T o stop this operation and play the cassette tape, press the button again. NOTE When the cassette tape ends during fast- forwar d or r ewind, it automatically stops and starts playing.
Black plate (214,1) q Operating the Compact Disc (CD) Player í T rack up button T rack down button Load button Scan button Repeat button CD slot CD play button CD eject button Random button Rev erse .
Black plate (215,1) Music scan This feature helps to find a program by playing about the first 10 seconds of each track. Press the scan button ( ) during playback to start the scan play operation (the track number will flash). Press the scan button ( ) again to cancel scan playback.
Black plate (216,1) q Operating the In-Dash CD Changer í T rack up button Disc up/Folder up button Disc down/F older down b utton T rack down button Load button Scan button Repeat button CD slot CD e.
Black plate (217,1) Normal insertion 1. Press the load button ( ). 2. When “ IN ” is displayed, insert the CD. Inserting CDs into desired tray num ber 1. Press and hold the load button ( ) for about 2 seconds until a beep sound is heard. 2. Press the channel preset button for the desired tray number while “ W AIT ” is displayed.
Black plate (218,1) NOTE l CDs will be ejected starting with the one with the lowest number . l All CDs in the tray will be ejected continuously . l CDs can be ejected when the ignition switch is off. Pr ess and hold the CD eject button ( ) for about 2 seconds and all CDs will eject.
Black plate (219,1) (Folder repeat) 1. Press the repeat button ( ) during playback, and then press the button again within 3 seconds to play the tracks in the curren t folder repeatedly . “ RPT ” is displayed. 2. Press the button again to cancel the repeat playback.
Black plate (220,1) Display scroll (MP3 compat ible type) Only 12 characters can be displayed at one time. T o display the rest of the characters of a long title, turn the display feed dial ( ) to the right. Hidden titles can be scrolled into the display one character at a time.
Black plate (221,1) q Error Indications If you see an error indication on the display , find the cause in the chart. If you cannot clear the error indication, take the vehicle to an Authorized Mazda Dealer . Indication Cause Solution CHECK CD CD is inserted upside down Insert the CD properly .
Black plate (222,1) Audio Control Switch Operation (Steering Wheel) í When the audio unit is turned on, operation of the audio unit from the steering wheel is possible. NOTE Because the audio unit will be turned off under the following conditions, the switches will be inoperable.
Black plate (223,1) NOTE Cassette tape, CD, CD changer and SIRIUS digital satellite radio modes cannot be selected in the following cases: l A cassette deck, CD, CD changer , or SIRIUS digital satellite radio unit is not equipped on the audio system. l A cassette tape, or CD has not been inserted.
Black plate (224,1) Auxiliary Input Y ou can connect portable audio units or similar products on the market to the auxiliary jack to lis ten to music or audio over the vehicle's speakers.
Black plate (225,1) 3. Using a coin, turn the cap counterclockwise (about 45° from the closed position) an d remove it. NOTE Do NOT discar d the cap. 4. Open the tray by pulling the lower release catch. 5. Pass the connection plug cord through the hole of the tray and insert the plug in the auxiliary jack.
Black plate (226,1) 7. Pass the connection plug cord through the slit in the tray mat and then set the tray mat in place. T o operate the portabl e audio unit 1. T urn the ignition switch to the ACC or ON position. 2. Press the power/volume dial to turn the audio system on.
Black plate (227,1) Safety Certification This CD player is made and tested to meet exacting safety standards. It meets FCC requirements and complies with safety performance standards of the U.S. Department of Health and Human Services. CAUTION Ø This CD player should not be adjusted or repaired by anyo ne except qualified ser vice personnel.
Black plate (228,1) Sunvisors When you need a sunvisor, lower it for use in front or swing it to the side. Sun visor q V anity Mirrors í T o use the vanity mirror, lower the sunvisor .
Black plate (229,1) q Overhead Lights í Front Switch Position Front Overhead Lights Light off l Light is on when any door is open l ( With illuminated entry system ) Light is on or off when the illum.
Black plate (230,1) Switch Position Luggage Compartment Light Light off Light on when the liftgate is open 6-52 Interior Comfort Interior Equipment Mazda3_8X41-EA-07F_Edition1 Page230 W ednesday , April 25 2007 1:6 PM Form No.
Black plate (231,1) Information Display With trip computer Without trip computer T rip computer/Clock Audio display Climate control display/Ambient temperature display q Information Display Functions .
Black plate (232,1) q Clock NOTE When the trip computer is displayed, press the CLOCK button to change the display to the time. When the ignition switch is in the ACC or ON position, the time is displ ayed. Time setting 1. Press the CLOCK button until the beep sounds and the displayed time flashes.
Black plate (233,1) Without fully automatic type air conditioner When the ignition switch is in the ON position, the ambient temperature is displayed. NOTE l Under the following conditions, the ambien.
Black plate (234,1) U.S.A. CANADA When you've slowed to about 5 km/h (3 mph), —— L/100 km ( —— mpg) will be displayed. A verage fuel economy mode This mode displays the a verage fuel economy by calculating the fuel consumption and the distance traveled since connecting the battery or resettin g the data.
Black plate (235,1) U.S.A. CANADA NOTE l Even though the distance-to-empty display may indicate a sufficient amount of r emaining mileage before r efueling is r equir ed, r efuel as soon as possible if the fuel gauge needle nears E or the low fuel warning light illuminates.
Black plate (236,1) Lighter The ignition switch must be in the ACC or ON position. Press the lighter in and release it. When ready for use, it automatically pops out. CAUTION Ø Don't touch the metal part of the lighter, you may burn yourself. Ø Don't hold the lighter in because it will overheat.
Black plate (237,1) Cup Holder WARNING Never use a cup holder to hold hot liquids while the vehicle is moving: Using a cup holder to hold hot liquids while the vehicle is moving is dangerous.
Black plate (238,1) Bottle Holder Bottle holders are on the inside of the front doors. Bottle holder CAUTION Do not use the bottle holders for containers without caps. The contents may spill when the door is opened or closed. Storage Compartments WARNING Keep storage boxes closed when driving: Driving with the storage boxes open is dangerous.
Black plate (239,1) q Center Console T o open, pull the lower release latch. Small items can be placed in the tray of the center console lid. T o open it, pull the upper release latch.
Black plate (240,1) Without flexible floor board T o use the cargo sub-co mpartment, remove or lift the trunk board. Cargo sub- compartment T runk board q Flexible Floor Board (5 Door) í The luggage compartment can be separated vertically and/or horizontally , using the trunk board and the trunk board loops.
Black plate (241,1) 2. Insert the trunk board loops into the trunk board slits. Front T runk board NOTE T o facilitate insertion of the trunk board loops into the trunk boar d slits, first insert the bottom of the rear trunk boar d into the gr oove of the luggage sub-compartment.
Black plate (242,1) 3. Insert the other trunk board loop into slit B until a click sound is heard. Slit B 4. Rock the trunk board to make sure the board is installed secure ly . CAUTION Do not place or remove luggage via the rear passenger seat area while the vehicle is moving.
Black plate (243,1) When placing an electrical device (e.g. cellular phone) in the tray which is connected to the accessory socket, pass the connection plug cord through the slot in the cap. Cap slot, closed Cap slot, opened 1. Open the lid by pulling the upper release catch.
Black plate (244,1) 7. Pass the connection plug cord through the slit in the tray mat and then set the tray mat in place. 6-66 Interior Comfort Interior Equipment Mazda3_8X41-EA-07F_Edition1 Page244 W ednesday , April 25 2007 1:6 PM Form No.
Black plate (245,1) 7 In Case of an Emergency Helpful information on what to do in an emergency . Parking in an Em ergency ................................................... ....... ... 7-2 Parking in an Emergency .......................... .........
Black plate (246,1) Parking in an Emergency The hazard warning lights shoul d always be used when you stop on or near a roadway in an emergency . The hazard warning lights war n other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it.
Black plate (247,1) Spare T ire and T ool Storage Spare tire and tools are stor ed in the locations illust rated in the diagram. Lug wrench Jack handle T iedown eyelet Jack Spare tire 4 Door In Case of an Emergency Flat Tir e 7-3 Mazda3_8X41-EA-07F_Edition1 Page247 W ednesday , April 25 2007 1:6 PM Form No.
Black plate (248,1) Jack Jack handle Spare tire Lug wrench 5 Door Jack handle Jack Spare tire Lug wrench T iedown e yelet (T ype A) (T ype B) T iedown e yelet 7-4 In Case of an Emergency Flat Tir e Mazda3_8X41-EA-07F_Edition1 Page248 W ednesday , April 25 2007 1:6 PM Form No.
Black plate (249,1) q Jack T o remove the jack 1. T urn the kno b and remove the cover . 2. T urn the wing bolt and jack screw counterclockwise. W ing bolt Jack screw T o secure the jack 1. Insert the wing bolt into the jack with the jack screw pointing up and turn the wing bolt clockwise to temporarily tighten it.
Black plate (250,1) WARNING Do not install the temporar y spare tire on the front wheels (driving wheels) when driving on ice or snow: Driving with a spar e tire on the front (driving) wheels on ice or sn ow is dangerous. Handling will be affected. You could lose control of the vehicle and have an accident.
Black plate (251,1) T o remove the spare tire (4 Door) 1. Remove the trunk mat and trunk board. 2. T urn the tire hold-down bolt counterclockwise with the lug wrench. (5 Door) 1. Remove the trunk mat, trunk board and cargo sub-compartment. (T ype A) (T ype B) 2.
Black plate (252,1) Changing a Flat Tire NOTE If the following occurs while driving, it could indicate a flat tire. l Steering becomes difficult. l The vehicle begins to vibrate excessively .
Black plate (253,1) q Removing a Flat Tire 1. If your vehicle is equipped with a wheel cover, pry off the wheel cover with the beveled end of the lug wrench. NOTE For ce the end of the lug wrench firmly between wheel and cover , or removal will be difficult.
Black plate (254,1) WARNING Use only the front and rear jackin g positions recommended in this manual: Attempting to jack the vehicle in positions other than those recommended in this manual is dangerous. The vehicle could slip off the jack and seriously injure or even kill someone.
Black plate (255,1) q Locking Lug Nuts í If your vehicle has optional antitheft wheel lug nuts, one on each wheel will lock the tires and you must use a special key to unlock them. This key is attached to the lug wrench and is stored with the spare tire.
Black plate (256,1) 3. Install the lug nuts with the bevele d edge inward; tighten them by hand. WARNING Do not apply oil or grease to lug nuts and bolts and do not tighten the lug nuts beyond the recom mended tightening torque: Applying oil or grease to lug nuts and bolts is dangerous.
Black plate (257,1) 7. Have the flat tire repaired or replaced as soon as possible. WARNING Do not drive with any tires that have incorrect air pressure: Driving on tires with incor rect air pressure is dangerous. Tires with incorrect pressure could aff ect handling and result in an accident.
Black plate (258,1) Overheating If the temperature gauge indicates overheating, the vehicle loses power, or you hear a loud knocking or pinging noise, the engine is probably too hot.
Black plate (259,1) If you find a leak or other damage, or if coolant is still leaking: Stop the engine and call an Authorized Mazda Dealer . Except L3 turbocharger engine L3 turbocharger engine If you find no problems, the engine is cool, and no leaks are obvious: Carefully add coolant as required (page 8-21).
Black plate (260,1) Starting a Flooded Engine If the engine fails to start, it may be flooded (excessive fuel in the engine). Follow this procedure: 1. If the engine does not start within 5 seconds on the first try , turn the key to the LOCK position, wait 10 seconds and try again.
Black plate (261,1) Jump-Starting Jump-starting is dangero us if done incorrectly . So follow the procedure carefully . If you feel unsure about jump-starting, we strongly recommend that you have a competent service technician do the work.
Black plate (262,1) Keep all flames, including cigarettes, and sparks away from open batter y cells: Flames and sparks near open battery cells are danger ous. Hydrogen gas, produced during normal battery operation, could ignite and cause the battery to explode.
Black plate (263,1) 1. Remove the battery cover from its front side. Battery cov er 2. Make sure the booster battery is 12 V and that its negative terminal is grounded. 3. If the booster battery is in another vehicle, don't allow both vehicl es to touch.
Black plate (264,1) Push-Starting Do not push-start your Mazda. WARNING Never tow a vehicle to star t it: Towing a vehicle to start it is dangerous. The vehicle being towed could surge forward when its engine starts, causing the two vehicle s to collide.
Black plate (265,1) T owing Description W e recom mend that towing be done only by an Authorized Mazda Dealer or a commercial tow-truck service. Proper lifting and towing are necessary to prevent damage to the vehicle. Government and local law s must be followed.
Black plate (266,1) CAUTION Do not use the hooks under the rear bumper for towing and tying down, as they cannot hold the load and it will damage the bumper. Hooks Tiedown Hook CAUTION Don't use the tiedown hook under the rear for towing. It is designed ONLY for tying down the vehicle when it's being transported.
Black plate (267,1) 3. Securely install the tiedown eyelet using the lug wrench. Lug wrench 4. Hook the tying rope to the tiedown eyelet. CAUTION If the tiedown eyelet is not securely tightened, it may loosen or dise ngage from the bumper when tying down the vehicle.
Black plate (268,1) 7-24 Mazda3_8X41-EA-07F_Edition1 Page268 W ednesday , April 25 2007 1:6 PM Form No.8X41-EA-07F.
Black plate (269,1) 8 Maintenance and Care How to keep your Mazda in top condition. Introduction .................................................. ................................ 8-2 Introduction ............................................. .......
Black plate (270,1) Introduction Be extremely careful and prevent inju ry to yourself and others or damage to your vehicle when using this manual for inspectio n and maintenance.
Black plate (271,1) Scheduled Maintenance (USA, Canada, and Puerto Rico) Follow Schedule 1 if the vehicle is operat ed mainly where none of the follow ing conditions apply .
Black plate (272,1) q Schedule 1 Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 6 12 18 24 30 36 42 48 ×1000 km 12 24 36 48 60 72 84 96 ×1000 miles 7.
Black plate (273,1) Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 6 12 18 24 30 36 42 48 ×1000 km 12 24 36 48 60 72 84 96 ×1000 miles 7.
Black plate (274,1) q Schedule 2 Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 4 8 12 16 20 24 28 32 36 40 44 48 ×1000 km 8 16 24 32 40 48 56 64 72 80 88 9.
Black plate (275,1) Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 4 8 12 16 20 24 28 32 36 40 44 48 ×1000 km 8 16 24 32 40 48 56 64 72 80 88 96 ×1000 mile.
Black plate (276,1) Scheduled Maintenance (Mexico) Follow Schedule 1 if the vehicle is operat ed mainly where none of the follow ing conditions apply .
Black plate (277,1) q Schedule 1 Maintenance Interval Number of months or kilometers, whichever comes first Months 6 12 18 24 30 36 42 48 54 60 66 72 ×1000 km 10 20 30 40 50 60 70 80 90 100 1 10 120 .
Black plate (278,1) Maintenance Interval Number of months or kilometers, whichever comes first Months 6 12 18 24 30 36 42 48 54 60 66 72 ×1000 km 10 20 30 40 50 60 70 80 90 100 1 10 120 AIR CONDITIONER SYSTEM Cabin air filter R R R Chart symbols: I: Inspect: Inspect and clean, repair , adjust, or replace if necessary .
Black plate (279,1) q Schedule 2 Maintenance Interval Number of months or kilometers, whichever comes first Months 3 6 9 12 15 18 21 24 27 30 33 36 ×1000 km 5 10 15 20 25 30 35 40 45 50 55 60 ENGINE .
Black plate (280,1) Maintenance Interval Number of months or kilometers, whichever comes first Months 3 6 9 12 15 18 21 24 27 30 33 36 ×1000 km 5 10 15 20 25 30 35 40 45 50 55 60 AIR CONDITIONER SYSTEM Cabin air filter R R R Chart symbols: I: Inspect: Inspect and clean, repair , adjust, or replace if necessary .
Black plate (281,1) (Cont.) Maintenance Interval Number of months or kilometers, whichever comes first Months 39 42 45 48 51 54 57 60 63 66 69 72 ×1000 km 65 70 75 80 85 90 95 100 105 1 10 1 15 120 E.
Black plate (282,1) Maintenance Interval Number of months or kilometers, whichever comes first Months 39 42 45 48 51 54 57 60 63 66 69 72 ×1000 km 65 70 75 80 85 90 95 100 105 1 10 1 15 120 AIR CONDITIONER SYSTEM Cabin air filter R R R Chart symbols: I: Inspect: Inspect and clean, repair , adjust, or replace if necessary .
Black plate (283,1) Owner Maintenance Schedule The owner or a qualified service technician shoul d make these vehicle inspections at the indicated intervals to ensure safe and dependab le operation. Bring any problem to the attention of an Authorized Mazda Dealer or qualified service technician as soon as possible.
Black plate (284,1) Owner Maintenance Precautions Improper or incomplete servi ce may result in problems. This section gives instruct ions only for items that are easy to perform. As explained in the Introduction (page 8-2), several procedures can be done only by a qualified service technician with special tools.
Black plate (285,1) Engine Compartment Overview Main fuse Automatic transaxle fluid-lev el dipstick (Only for automatic transaxle) Brake/Clutch fluid reservoir Engine coolant reservoir Engine oil dips.
Black plate (286,1) Engine Oil NOTE Changing the engine oil should be done by an Authorized Mazda Dealer . q Recommended Oil Use SAE 5W-20 engine oil (Without turbocharger).
Black plate (287,1) The quality designation SM, or IL SAC must be on the label. 5W-20 120 100 80 60 40 20 0 –20 50 40 30 20 10 0 –10 –20 –30 Use SAE 5W-30 engine oil (With turbocharger).
Black plate (288,1) The quality designation SM, or IL SAC must be on the label. –30 –20 –10 0 10 20 30 40 50 –20 0 20 40 60 80 100 120 5W-30 q Inspecting Engine Oil Level 1. Be sure the vehicle is on a level surface. 2. W arm up the en gine to normal operating temperature.
Black plate (289,1) Engine Coolant q Inspecting Coolant Level WARNING Do not use a match or live flame in the engine compar tment. DO NOT ADD COOLANT WHEN T HE ENG INE IS HOT: A hot engine is dangerous. If the engine has been running, parts of the engine compartment can become very hot.
Black plate (290,1) CAUTION Ø Radiator coolant will da mage paint. Rinse it off quickly if spilled. Ø Use only soft (demineralized ) water in the coolant mixture. Water that contain s minerals will cut down on the coolant's effectiveness. Ø Don't add only water.
Black plate (291,1) Brake/Clutch Fluid q Inspecting Brake/Clutc h Fluid Level The brakes and clutch draw fluid from the same reservoir . Inspect the fluid level in the reservoir regularly . It should be kept at MAX. The level normally drops with accumulated distance, a condition associated with wear o f brake and clut ch linings.
Black plate (292,1) Power Steering Fluid q Inspecting Power Steering Fluid Level CAUTION To avoid damage to the power steering pump, don't operate the vehicle for long peri ods when the power steering fluid level is low. NOTE Use specified power steering fluid (page 10-4).
Black plate (293,1) Automatic T ransaxle Fluid (A TF) í q Inspecting Automatic T ransaxle Fluid Level The automatic transaxle flui d level should be inspected regularly . Measure it as described below . 5A T CAUTION Ø Always check the automatic transaxle fluid level according to the following procedure.
Black plate (294,1) 4A T The volume of fluid changes with temperature. Fluid must be checked while idling the engine without driving at normal operating temperat ure. CAUTION Ø Low fluid level causes transax le slippage. Over filling can ca use foaming, loss of fluid, and transaxle malfunction.
Black plate (295,1) Fully insert the dipstick. When adding fluid, inspect with the dipstick to make sure it doesn't pass full. NOTE Inspect the fluid on both sides of the dipstick in a well lit ar ea for an accurate r eading.
Black plate (296,1) Inspect fluid level in the washer fluid reservoir; add fluid if necessary . T o inspect the washer fluid level in the front reservoir, pull off the cap. Then, holding your thum b over the hole in the center of the cap, lift it straight up.
Black plate (297,1) Wiper Blades CAUTION Ø Hot waxes applied by automatic car washers have been known to affect the wiper's ability to clean windows. Ø To prevent damage to the wiper blades, don't use gasoline, kerosene, paint thinner, or other solvents on or near them.
Black plate (298,1) 2. Pull down the blade rubber and slide it out of blade holder . 3. Remove the metal stiffener from each blade rubber and install them in the new blade. CAUTION Ø Don't bend or discard th e stiffener. You need to use them again.
Black plate (299,1) CAUTION To prevent damage to the rear window let the wipe r arm down easily, don't let it slap down on the rear window. 2. Pull down the blade rubber and slide it out of the blade holder . 3. Remove the metal stiffener from each blade rubber and install them in the new blade.
Black plate (300,1) Battery WARNING Wash hands after handling the batter y and related accessories: Battery posts, terminals and relate d accessories contain lead and lead compounds, chemicals known to the State of California to ca use cancer and reproduct ive harm.
Black plate (301,1) Keep all flames, including cigarettes, and sparks away from open batter y cells: Flames and sparks near open battery cells are danger ous. Hydrogen gas, produced during normal battery operation, could ignite and cause the battery to explode.
Black plate (302,1) NOTE Remove the battery cover before performing battery maintenance. Battery cov er q Battery Maintenance T o get the best service from a battery: l Keep it securely mount ed. l Keep the top clean and dry . l Keep terminals and connections clean, tight, and coated with petroleum jelly or terminal grease.
Black plate (303,1) Tire s For reasons of proper performance , safety , and better fuel economy , always maintain recommended tire inflation pressures and stay within the recommended load limits and weight distribution. WARNING Using Different Tire T ypes: Driving your vehicle with differe nt types of tires is dangerous.
Black plate (304,1) NOTE l Always check tir e pr essur e when tir es ar e cold. l W arm tires normally exceed recommended pr essur es. Don't r elease air from warm tir es to adjust the pressur e.
Black plate (305,1) NOTE (W ith T ire Pressure Monitoring System) l When tires with steel wir e r einfor cement in the sidewalls ar e used, the system may not function correctly even with a genuine wheel. Refer to System Err or Activation on page 5-30.
Black plate (306,1) NOTE T ires degrade over time, even when they ar e not being used on the road. It is r ecommended that tires generally be r eplaced when they ar e 6 years or older . Heat caused by hot climates or fr equent high loading conditions can accelerate the aging process.
Black plate (307,1) Light Bulbs Side turn signal lights Rear turn signal lights License plate light Overhead light/Map lights (Front) Headlights (Low beam) Fog lights Brake lights/T aillights Rev erse.
Black plate (308,1) WARNING Do not replace the xen on fusion bulbs yourself: Replacing the xenon fusio n bulbs yourself is dangerous. Because the xenon fusion bulbs require high voltage, you could receive an elec tric shock if the bulbs are handled incorrectly.
Black plate (309,1) 3. Perform the following procedure when replacing the left headli ght bulb. Remove the clip, grasp the attached area of the slide mount and lift it upward, and then slide the slide mount to a position where it does not interfere with the frame.
Black plate (310,1) 3. Install the new bulb in the revers e order of removal. NOTE l T o replace the bulb, contact an Authorized Mazda Dealer . l If the halogen bulb is accidentally touched, it should be cleaned with rubbing alcohol befor e being used.
Black plate (311,1) Replacing a fog light bulbs í 1. T urn the screw counterclockwise and remove it and then partially peel back the mudguard. 2. Disconnect the electrical connector from the bulb by pressing the tab on the connector with your finger and pulling the connector downward.
Black plate (312,1) Brake lights/T aillight s (4 Door) With LED bulb Due to the complexit y and difficulty of the procedure, the LED bulbs shoul d be replaced by an Authorized Mazda Dealer . NOTE LED bulb replacement is not possible. The r ear combination component must be r eplaced.
Black plate (313,1) With Non-LED bulb 1. Remove the cover . Left side Right side 2. T urn the socket and bulb assembly counterclockwise and remove it. 3. Disconnect the bulb from the socket . 4. Install the new bulb in the revers e order of removal. NOTE T o replace the bulb, contact an Authorized Mazda Dealer .
Black plate (314,1) 4. Disconnect the bulb from the socket . 5. Install the new bulb in the revers e order of removal. NOTE T o replace the bulb, contact an Authorized Mazda Dealer . Rear turn signal lights (5 Door) 1. Remove the cover . Left side Right side 2.
Black plate (315,1) Reverse lights 4 Door 1. Pull the center section of the plastic retainer and remove the retai ners, and then remove the trunk rear trim. Remov al Installation 2. T urn the socket and bulb assembly counterclockwise and remove it. 3.
Black plate (316,1) 3. T urn the socket and bulb assembly counterclockwise and remove it. 4. Disconnect the bulb from the socket . 5. Install the new bulb in the revers e order of removal. NOTE T o replace the bulb, contact an Authorized Mazda Dealer .
Black plate (317,1) 2. Disconnect the bulb by pulling it out. Edge 3. Install the new bulb in the revers e order of removal. q Replacing Interior Light Bulbs Overhead light/Map lights (Front) í Due to the complexit y and difficulty of the procedure, the bulbs should be replaced by an Authorized Mazda Dealer .
Black plate (318,1) 3. Disconnect the bulb by pulling it out. 4. Install the new bulb in the revers e order of removal. Fuses Y our vehicle's electrical system is protected by fuses. If any lights, accessories, or controls don't work, inspect the appropr iate circuit protector .
Black plate (319,1) 3. T urn the knobs countercloc kwise and lower the fuse block. 4. Locate the position of the suspected fuse by using the chart inside the fuse block cover . 5. Pull the fuse straight out wi th the fuse puller provided on the inside of the engine compartment fuse block cover .
Black plate (320,1) 2. Remove the fuse block cover . 3. If any fuse but the MAIN fuse is blown, replace it with a new one of the same amperage rating .
Black plate (321,1) q Fuse Panel Description Fuse block (Engine compartment) 1 2 3 4 5 6 78 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 Without turbocharger DESC.
Black plate (322,1) DESCRIPTION FUSE RA TING PROTECTED COMPONENT 18 AUDIO 30A Audio system (BOSE Sound System-equipped model) 19 ABS IG 10A ABS í , DSC í 20 FOG 15A Front fog lights í 21 HORN 15A H.
Black plate (323,1) DESCRIPTION FUSE RA TING PROTECTED COMPONENT 19 ABS IG 10A ABS 20 FOG 15A Front fog lights 21 HORN 15A Horn 22 DRL 10A DRL í 23 H/CLEAN ―― 24 ETC 10A Elec. throttle valve 25 ―― ― 26 A/C MAG 10A Air conditioner 27 ―― ― 28 ―― ― 29 P.
Black plate (324,1) Fuse block (Passenger's side) 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 8.
Black plate (325,1) DESCRIPTION FUSE RA TING PROTECTED COMPONENT 56 P/WIND L ―― 57 ALARM ―― 58 M/DEF 7.5A Mirror Defroster í 59 ―― ― 60 HEAD LOW R 15A Headlight low beam (RH), Headlight.
Black plate (326,1) How to Minimize Environmental Paint Damage The paintwork on your Mazda repres ents the latest technical developments in composition and methods of applicati on. Environmental hazards, howe ver , can harm the paint's protective proper ties, if proper care is not taken.
Black plate (327,1) q W ater Marks Occurrence Rain, fog, dew , and even tap water can contain harmful minerals such as salt and lime. If moisture containing these minerals settles on the vehicl e and evaporates, the minerals will concentrate and harden to form white rings.
Black plate (328,1) Exterior Care Follow all label and container direc tions when using a chemical cleaner or polish. Read all warnings and cautions. q Maintaining the Finish W ashing CAUTION When the.
Black plate (329,1) CAUTION Ø Don't use steel wool, abrasive cleaners, or strong detergen ts containing highly alkaline or caustic agents on chro me-plated or anodized aluminum pa rts. This may damage the protective coating; also, cleaners and detergents may discolor or deteriorate the paint.
Black plate (330,1) q Repairing Damage to the Finish Deep scratches or chips on the finish should be repaired promptly . Exp osed metal quickly rusts and can lead to major repairs.
Black plate (331,1) q Aluminum Wheel Maintenance A protective coating is provi ded over the aluminum wheels. Special care is needed to protect this coating. NOTE l Don't use a wire brush or any abrasive cleaner , polishing compound, or solvent on aluminum wheels.
Black plate (332,1) T o keep the fabri c looking clean and fresh, take care of it. Otherwise its color will be affected, it can be stained easily , and its fire-resistance may be reduced. CAUTION Use only recommended cleaner s and procedures. Others may aff ect appearance and fire-resis tance.
Black plate (333,1) 9 Customer Information and Report ing Safety Defects Important consumer information including warranties and add-on equipment. Customer Assistance ............................... 9-2 Customer Assistance (U.S.A.) ............ 9-2 Customer Assistance (Canada) .
Black plate (334,1) Customer Assistance (U.S.A.) Y our complete and permanent satisfaction is our business. W e are here to serve you. All Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda ve hicle in top condition.
Black plate (335,1) By letter at: Attn: Customer Assistance Mazda North American Operati ons 7755 Irvine Center Dri ve Irvine, CA 92618-2922 P.O. Box 19734 Irvine, CA 92623-9734 In order to serve you efficiently and effectively , please help us by providing the follow ing information: 1.
Black plate (336,1) Customer Assistance (Canada) q Satisfaction Review Process Y our complete and perm anent satisfaction is of prima ry concern to Mazda. All Authorized Mazda Dealers have both the knowledge and tools to keep your Mazda in top condition.
Black plate (337,1) Please recognize that the resolution of service problems in most cases requires the use of your Mazda dealer's service facilit ies, personnel and equipment. W e urge you to follow the above three steps in sequenc e for most effective results.
Black plate (338,1) CAMV AP is fully implemented in all provinces and territories. Consumers wishing to obtai n further information about the Program should contact the Provincial Administrator at 1 (.
Black plate (339,1) Customer Assistance (Puerto Rico) Y our complete and permanent sati sfaction is our busin ess. That is why all Authori zed Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition.
Black plate (340,1) Customer Assistance (Mexico) Y our complete and permanent satisfaction is our business. W e are here to serve you. All Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda ve hicle in top condition.
Black plate (341,1) In order to serve you efficiently and effectively , please help us by providing the follow ing information: 1. Y our name, address, and telephone number 2.
Black plate (342,1) Importer/Distributor q U.S.A. Mazda North American Operat ions 7755 Irvine Center Dri ve Irvine, CA 92618-2922 U.S.A. P.O. Box 19734 Irvine, CA 92623-9734 U.S.A. TEL: 1 (800) 222-5500 (in U.S.A.) (949) 727-1990 (outside U.S.A.) Distributor in Each Area q CANADA Mazda Canada Inc.
Black plate (343,1) T riple J Saipan, Inc. (d.b.a. T riple J Motors ) P.O. Box 500487 Saipan, MP 96950-0487 TEL: (670) 234-7133/3051 q AMERICAN SAMOA Polynesia Motors, Inc.
Black plate (344,1) W arranties for Y our Mazda l New V ehicl e Limited W arrant y l Distributor Major Compo nent Limited W arranty (Canada only) l Safety Restraint System Limi ted W arranty l Anti-perforation Limited W arrant y l Federal Emission Control W arranty (U.
Black plate (345,1) Outside the United States Government regulations in the United States require that automobiles meet specific emission regulations and safety stand ards. Therefore, vehicles built for use in the United States may differ from those sold in other countr ies.
Black plate (346,1) Outside Canada Government regulations in Canada require that automobiles meet specific emi ssion regulations and safety regulations.
Black plate (347,1) Registering Y our V ehicle in A Foreign Country (Except United States and Canada) Government regulations in your country could require that automobiles meet specific emission and safety standards. V ehicles built for your country may differ from those built for other countries.
Black plate (348,1) Add-On Non-Genuine Parts and Accessories Non-genuine parts and access ories for Mazda vehicles can be found in stor es. These may fit your vehicle, but they are not approved by Mazda for use with Mazda vehicles.
Black plate (349,1) Cell Phones W arning WARNING Please comply with the legal regulations concernin g the use of communication equipment in vehicles in your cou ntry: Use of any electrical devices such as cell phones , computers, portable radios , vehicle navigation or other devices by th e driver while the vehicle is moving is dangerous.
Black plate (350,1) T ype Approval of Equipment Immobilizer system 9-18 Customer Information and Reporting Safety Defects T ype Approval of Equipment Mazda3_8X41-EA-07F_Edition1 Page350 W ednesday , April 25 2007 1:7 PM Form No.
Black plate (351,1) Ke yless entry system Customer Information and Reporting Safety Defects T ype Approval of Equipment 9-19 Mazda3_8X41-EA-07F_Edition1 Page351 W ednesday , April 25 2007 1:7 PM Form No.
Black plate (352,1) Uniform Tire Quality Grading System (UTQGS) This information relat es to the tire gradi ng system developed by the U.S. National Highway Traff ic Safety Administration for grading tires by tread wear , traction, and temperature performance.
Black plate (353,1) WARNING Keep your vehicle's tires properly inflated and not overloaded: Driving with improperly inflated or overloaded tires is dangerou s. Excessive speed, underinflation, or exces sive loading, either sep arately or in combinat ion, can cause heat buildup and possible tire failure.
Black plate (354,1) Tir e Labeling Federal law requires tir e manufacturers to place standardized information on the sidewall of all tires. This infor mation identifies and describes the fundam ental characteristics of the tire and also provides a tire identification numbe r for safety standard certificati on and in case of a recall.
Black plate (355,1) 1 1. Tread wear , traction and temperature grades 12. Max. permissible inflation pressure 13. SAFETY W ARNIN G P215/65R15 95H is an example of a tire size an d load index rating. Here is an explanation of the various components of that tire size and load index rating.
Black plate (356,1) H “ H ” is the speed rating. The speed rating denotes the maximum speed for which the use of the tire is rated. Letter Rating Speed Rating Q 99 mph R 106 mph S 1 12 mph T 118 m.
Black plate (357,1) T read W ear , T raction and T emperature Grades T read wear : The tread wear grade is a comparative rati ng based on the wear rate of the tire when tested under controlled condition s on a specified government test course.
Black plate (358,1) q Information on T emporary Tires Please refer to the diagram below . 1. T empor ary tires 2. Nominal width of tire in milli meters 3. Ratio of height to width (aspect ratio) 4. Diagonal 5. Rim diameter code 6. Load index&speed symbol T1 15/70D 16 90M is an example of a tire size and load index rating.
Black plate (359,1) 70 “ 70 ” is the aspect ratio. This two-digit numbe r indicates the tire's ratio of height to width. D “ D ” is the tire construction symbol. D indicates “ diagonal ply constructi on ” . 16 “ 16 ” is the wheel rim diameter in inches.
Black plate (360,1) Location of the Tire Label (Placard) Y ou will find the tire label containing tire inflation pressure by tire size and other imp ortant information on the driver's side B- pillar or on the edge of the driver's door frame.
Black plate (361,1) WARNING Always check the tire inflation press ures on a regular basis according to the recommended tire inflation pressure on the tire label and in conjunction with the information in this owner's manual: Driving your vehicle with under-inflated tire s is dangerous.
Black plate (362,1) q Glossary of T erms Tire Placard: A label indicating the OE tire sizes, recommended inflation pressure, and the maximum weight the vehicl e can carry . Tire Identification Number (TIN): A number on the sidewall of each tire provi ding information about the tire brand and manufacturing plant , tire size, and date of manufacture.
Black plate (363,1) Tir e Maintenance Improper or inadequate vehicle maintenanc e can cause tires to wear abnormally . Here are some important mai ntenance points: q Tir e Inflation Pressure Inspect all tire press ure monthly (including the spare) when the tires are cold.
Black plate (364,1) CAUTION Rotate unidirectional tires and radial tires that have an asymmetrical tread pattern or studs only from front to rear, not from side to side .
Black plate (365,1) q Safety Practices The way you drive has a great deal to do with your tire mileage and safet y . So cultivate good driving habits for your own benefit.
Black plate (366,1) V ehicle Loading WARNING Do not taw a trailer with this vehicle: Towing a trailer with this vehicle is dangerous because it has not been designed to tow a trailer and doing so will affect the drive system which could res ult in vehicle damage.
Black plate (367,1) Base Curb W eight is the wei ght of the vehicle including a full tank of fuel and all standard equipment . It does not include passengers, cargo, or optional eq uipment. V ehicle Curb W eight is the weight of your new vehicl e when you picked it up from your dealer plus any aftermarket equipment.
Black plate (368,1) SAMPLE CARGO Cargo W eight incl udes all weight added to the Base Curb W eight, incl uding cargo and optional equipment. Whe n towing, trailer tongue load or king pin weight is also part of cargo weight. The cargo weight limit decreases depending on the number of vehicle occupants.
Black plate (369,1) Examples: Based on a single occupant weight of 68 kg (150 lbs), and a value of 385 kg (849 lbs) for the “ combination weight of occupants and cargo should never exceed ” : The .
Black plate (370,1) SAMPLE WARNING Exceeding Axle Weight Rating Limits: Exceeding the Safety Certification Label axle weight rating limits is dangerous and could result in death or serious injur y as .
Black plate (371,1) GCW GCW (Gross Combination W eight) is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trai ler . GCWR (Gross Combination W eight Rating) is the maximum allowable weight of the vehicle and the loaded trailer - including all cargo and passengers - that the vehicle can handle without risking damage.
Black plate (372,1) WARNING Exceeding GVWR or GAWR Specificat ions: Exceeding the GV WR or the GAWR specified on the certification label is dangerous. Exceeding any vehicle rating limitation could resu lt in a serious accident, injury, or damage to the vehicle.
Black plate (373,1) Steps for Determining the Correct Load Limit: Steps for Determining Correct Load Limit: (1) Locate the statement “ The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs ” on your vehicle's placard.
Black plate (374,1) Reporting Safety Defects (U.S.A.) If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway T raffic Safety Administration (NHTSA) in addition to notifying Mazda Motor Corporation (Y our Mazda Importer/Distribut or).
Black plate (375,1) Reporting Safety Defects (Canada) Canadian customers who wish to report a safety-rel ated defect to Transport Canada, Defect Investigations and Recalls, may telephone the toll free.
Black plate (376,1) Service Publications Factory-authorized Mazda servi ce publications are available for owners who wish to do some of their own mai ntenance and repai r . When requesting any of our publications through an Authorized Mazda Dealer, refer to the chart below .
Black plate (377,1) q NA VIGA TION SYSTEM OWNER'S MANUAL: This booklet contains information regarding the proper operat ion and use of the navigation system.
Black plate (378,1) 9-46 Mazda3_8X41-EA-07F_Edition1 Page378 W ednesday , April 25 2007 1:7 PM Form No.8X41-EA-07F.
Black plate (379,1) 10 Specifications T echnical information about your Mazda. Identification Numbers ............... ................................................ 10-2 V ehicle Informat ion Labels ...................................... ...........
Black plate (380,1) V ehicle Information Labels q V ehicle Identification Number The vehicle identification number legally identifies your vehicle. The number is on a plate attached to the cowl panel located on the left corner of the dashboard. This plate can easily be seen through the windshield.
Black plate (381,1) q Tir e Pressure Label q Engine Number Without turbocharger Forward With turbocharger Forward Identification Numbers 10-3 Mazda3_8X41-EA-07F_Edition1 Page381 W ednesday , April 25 2007 1:7 PM Form No.
Black plate (382,1) Specifications q Engine Item Specification Without turbocharger With turbocharger 2.0-liter engine 2.3-liter engine T ype DOHC-16V in-line, 4-cylinder Bore×Stroke 87.5 × 83.1 mm (3.44 × 3.27 in) 87.5 × 94.0 mm (3.44 × 3.70 in) Displacement 1,999 ml (1,999 cc, 122.
Black plate (383,1) q Capacities (Approximate Quantities) Item Capacity Engine oil W ithout turbocharger W ith oil filter replacement 4.3 L (4.5 US qt, 3.8 Imp qt) W ithout oil filter replacement 3.9 L (4.1 US qt, 3.4 Imp qt) W ith turbocharger W ith oil filter replacement 5.
Black plate (384,1) q W eights 4 Door 2.0-liter engine Item W eight Manual transaxle Automatic transaxle GVWR (Gross V ehicle W eight Rating) 1,719 kg (3,790 lbs) 1,733 kg (3,821 lbs) GA WR (Gross Axle W eight Rating) Front 919 kg (2,026 lbs) 983 kg (2,068 lbs) Rear 800 kg (1,764 lbs) 795 kg (1,753 lbs) 2.
Black plate (385,1) q Light Bulbs Exterior light Light bulb Category W attage ECE R (SAE) Headlights High beam 60 HB3 (HB3) Low beam Halogen 55 H7 (H7) Xenon fusion 35 D2S (D2S) Front turn signal ligh.
Black plate (386,1) q Tir es NOTE The tires have been optimally matched with the chassis of your vehicle. When r eplacing tir es, Mazda r ecommends that you replace tir es of the same type originally fitted to your vehicle. For details, contact an Authorized Mazda Dealer .
Black plate (387,1) 11 Index 1 1-1 Mazda3_8X41-EA-07F_Edition1 Page387 W ednesday , April 25 2007 1:7 PM Form No.8X41-EA-07F.
Black plate (388,1) A Accessory Socket .................. ............ 6-64 Add-On Non-Genuine Parts and Accessories ....................................... 9-16 Air Bag Systems ............................... 2-40 Ambient T emperature Display .......
Black plate (389,1) C Customer Assistance ........................... 9-2 D Dashboard Illuminatio n .................... 5-35 Daytime Running Lights ................... 5-53 Defroster Rear window ........................... ... 5-58 Dimensions .......
Black plate (390,1) G Glove Box ......................................... 6-60 H Hazard W arning Flasher ................. ... 5-60 Hazardous Driving ................. ............. 4-8 Headlights Control ............ ........................... 5-50 Flashing .
Black plate (391,1) M Manual Transaxle Operation ............... 5-9 Recommendations for shifting .... 5-10 Map Lights ........................................ 6-51 Mirrors Outside mirrors .......................... 3-29 Rearview mirror ..............
Black plate (392,1) S Storage Compartments ...................... 6-60 Cargo securi ng loops .................. 6-61 Cargo sub-compartment ............. 6-61 Center console ................ ............ 6-61 Flexible Floor Board .................. 6-62 Glove box .
Black plate (393,1) W W asher Fluid .......... ........................... 8-27 W eight s .................. ........................... 10-6 Wheel Replacement .......................... 8-38 W indows Power windows .......................... 3-18 W indshield W asher .
Black plate (394,1) 1 1-8 Mazda3_8X41-EA-07F_Edition1 Page394 W ednesday , April 25 2007 1:7 PM Form No.8X41-EA-07F.
©2007 Mazda Motor Corporation Printed in Japan Ma y 2007(Print1) Before Use Getting started Routing Address Book V olume Adjustment If necessary Preparation NA VIGA TION SYSTEM See page for specific information. See page for specific information. See page for specific information.
2 Before Use Navigation Set Up RDM-TMC If necessary Rear View Monitor Accessories Please contact an A uthorized Mazda Dealer if you are missing the f ollowing accessory .
3 Before Use If necessary Rear View Monitor MEMO 1%>(%C2%:-C)%FSSO4EKI8YIWHE]%TVMP41.
4 Before Use Navigation Set Up RDM-TMC If necessary Rear View Monitor Contents Preparation n Bef ore Use Accessories ........................................................................................ 2 Laser products: ...........................
5 Before Use If necessary Rear View Monitor Adv anced use n Address Book l Address Book ...............................................................
6 Before Use Navigation Set Up RDM-TMC If necessary Rear View Monitor Saf ety Inf or mation n Read this owner’ s manual for y our Navigation System carefully bef ore using the system. It contains instructions about how to use the system in a safe and eff ective manner .
7 Before Use If necessary Rear View Monitor Operation is subject to the f ollowing tw o conditions; (1) this de vice may not cause interf erence, and (2) this de vice must accept any interf erence, including interference that ma y cause undesired operation of the device .
8 Before Use Navigation Set Up RDM-TMC If necessary Rear View Monitor Introduction n Extremely lo w or high temperatures may interf ere with normal operation The inside of the vehicle can become v er y hot or cold when it is parked for e xtended periods in direct sunlight or in cold places with the engine tur ned off.
9 Before Use If necessary Rear View Monitor MEMO 1%>(%C2%:-C)%FSSO4EKI8YIWHE]%TVMP41.
10 Before Use Navigation Set Up RDM-TMC If necessary Rear View Monitor Names and Functions Z C ( RET key Returns to the previous screen. VO I C E k e y l Initiates vocal guidance f or route maneuvers .
11 Before Use If necessary Rear View Monitor Switching the Display Mode ZOOM key Changes the map scale. ( page 29) POS (P osition) key Displa ys your current position. ENTER key l Ex ecutes a selected item. l Displa ys pop up menu. MENU key Displa ys menu.
12 Before Use Navigation Set Up RDM-TMC If necessary Rear View Monitor Names and Functions MENU key Displa ys menu. ( page 16) MENU VO I C E k e y l Initiates vocal guidance f or route maneuvers .
13 Before Use If necessary Rear View Monitor ZOOM key Changes the map scale. ( page 29) RET key Retur ns to the pre vious screen. POS (P osition) key Displa ys your current position. ZOOM RET POS Jo ystic k l Selects items by tilting it up , down, right, and left.
14 Routing Address Book Getting started Activ ation Inser t the map disc into the unit to star t the Mobile Navigation System. Note l The map disc cannot be inser ted or ejected while the ignition switch is in the OFF position.
15 Getting started l The Current P osition screen appears. Note l Y ou can select the language by select and press . Y ou can also change the selected language using Language Selection. ( page 22) l The CA UTION screen remains on the display unless yo u select and press .
16 Routing Address Book Getting started Men u Menu appears when pressing . MENU Destination Entr y and Route Search ( page 30) Address Book ( page 46) Cancel Guidance ( page 41) Route Options ( page 4.
17 Getting started Set Cloc k The current time is set using this function. Since time notification is provided b y a GPS satellite. Bef ore Steps select MENU ENTER ENTER Open the [SET CLOCK] screen Select if you pref er 24-hour display; f or 12-hour displa y .
18 Routing Address Book Getting started Na vigation Set Up l Y ou can alter the map displa y conditions, the route guidance conditions and show the system inf ormation. n Stop your vehic le before the following operations. Do not change the settings and destination locations while driving.
19 Getting started Na vigation Set Up Bef ore Steps select select User Setting MENU ENTER ENTER ENTER ENTER Open the [USER SETTINGS] screen n Map Color Select a screen color from to options. n Map Mode l Au to : The display will automatically s witch between Da y and Night illumination mode when the headlights are turned off and on respectively .
20 Routing Address Book Getting started Na vigation Set Up Before Steps select select User Setting MENU ENTER ENTER ENTER ENTER Open the [USER SETTINGS] screen n Arrival Time The time which is display ed until reaching the destination or a wa y point can be set as an estimated arrival time or the remaining time.
21 Getting started Na vigation Set Up This function allows y ou set the categories on the area displayed when the (P oint of Interest) menu is selected on the map . Quick POI enables y ou store up to six diff erent kinds of categories which you use most regularly .
22 Routing Address Book Getting started Na vigation Set Up Y ou can change the language of the menu and the v oice guidance. Before Steps select select Language MENU ENTER ENTER ENTER ENTER Open the [LANGU A GE] screen Select your pref erred language from the list.
23 Getting started Na vigation Set Up Bef ore Steps select select Map Configuration MENU ENTER ENTER ENTER ENTER Open the [MAP CONFIGURA TION] screen n Map Screen Select single or dual map display .
24 Routing Address Book Getting started Na vigation Set Up This function allows y ou to correct any error in the position or direction of y our v ehicle display . Before Steps select Adjusting Current P osition and Direction select Open the [Calibrate P osition] screen Mov e to the correct position and select .
25 Getting started select . h you are u rrent o mplete. Map V ersion The map and software v ersion numbers can be confir med using this function. select Map and software v ersions are now display ed.
26 Routing Address Book Getting started Na vigation Set Up This function replaces all the settings in the mobile navigation system with the initial def ault settings.
27 Getting started Screen Names and Functions Screens Before Setting Route (1) Map Orientation control ( page 29) (2) GPS (Global P ositioning System) marker ( page 52) (3) Clock Clock will be displa yed when you set up Clock on Na vigation Set Up On.
28 Routing Address Book Getting started Displa y Menu screen will be shown when y ou press (DISP) and hold. Note Display Men u screen will be disappeared when the y hav e been unused during a few seconds . n Adjusting the screen quality l Adjusts the screen brightness Select "ADJ", and then "BRIGHT".
29 Getting started Screen change n Do not keep your e yes fixed on the monitor screen or operate the system while driving Do not change the settings and destination locations while driving. Minimize the time spent viewing the monitor screen and listening to the v oice guidance while driving.
30 Before Use Getting started Routing Destination Entr y and Route Search l Y ou can set the destination using various methods provided b y the system.
31 Before Use Getting started Routing l For Char acter Entry , please refer to page 39. l Do not keep your e yes fixed on the monitor screen or operate the system while driving. Do not change the settings and destination locations while driving. Minimize the time spent viewing the monitor screen and listening to the v oice guidance while driving.
32 Before Use Getting started Routing Destination Entr y and Route Search P oint of interest Open the [DESTINA TION ENTR Y] Menu Select When entering the destination point directly Select When narro w.
33 Before Use Getting started Routing l For Char acter Entry , please refer to page 39. W hen entering h e destination p oint directly elect W hen narro wing own to category ame elect W hen narro wing.
34 Before Use Getting started Routing Destination Entr y and Route Search Emergency Select When stopped Displays the police station select screen. Displays the hospital select screen. When driving Sets the destination to the nearest police station automatically .
35 Before Use Getting started Routing Select the sort methods : Sor ts the police station or the hospital by Distance . : Sor ts the police station or the hospital by name .
36 Before Use Getting started Routing Destination Entr y and Route Search Before Steps select Memory P oint Home Preset Destination Previous Destination Intersection Freewa y On/ Off Ramp Coordinates .
37 Before Use Getting started Routing l For Char acter Entry , please refer to page 39. Select the desired Memory Point : Display up to fiv e previous suggestions. : Display the fiv e previous suggestions. : The order of the display ed list can be changed.
38 Before Use Getting started Routing Quic k POI l Y ou can select one of the Six Categories on the menu or List Categories and then select the POI(s) to be displa yed on the map .
39 Before Use Getting started Routing Char acter Entr y T o enter the street name, city name, and other . T o enter the house phone num ber , and other . Select the first se veral characters on the screen. (Step 1) Select y our target in the list. l If a desired name is not in the list, go back to Step 1, and try fewer char acters.
40 Before Use Getting started Routing Direct Destination Input Direct Destination Input Selecting Route 1 P osition the cursor on y our destination on the map Scroll the map and change the map scale if necessary . 2 Select 3 Select . Route calculation will be carried out and the entire route will be displa yed on the map .
41 Before Use Getting started Routing POI Icons on Maps / Delete Destination n POI (P oint of Interest) Icons The f ollowing are POI icons sho wn on maps.
42 Before Use Getting started Routing Route Options l During route guidance you can change the route options, stop or check the route . Before Steps select Route Preferences Modification of Destinatio.
43 Before Use Getting started Routing n Do not keep your e yes fixed on the monitor screen or operate the system while driving Do not change the settings and destination locations while driving. Minimize the time spent viewing the monitor screen and listening to the v oice guidance while driving.
44 Before Use Getting started Routing Route Options Before Steps select Display Previe w Route Previe w MENU ENTER Open the [ROUTE OPTIONS] Menu Select Select Use the button : Move the s : Carry out a.
45 Before Use Getting started Routing Use the buttons displa yed on-screen to carry out a simulation run. : Move the start point. : Carry out a simulation run in the direction of the star t point. When the Simulation star ts the button will be display ed as , and when selected, it will cause the Simulation to adv ance quickly .
46 Before Use Getting started Routing Address Book Address Book l Y ou can, edit, or delete any marked point. Before Steps select Memory P oint Storage Memory P oint Confirmation and Modification Pres.
47 Before Use Getting started Routing Address Book Set a memory point using your preferred method. Select a memory point to be modified : Allo ws the displa y icon to be selected. P age 1 and 2 contain standard icons, whereas the With Sound page contains icons which also playbac k sounds.
48 Before Use Getting started Routing Address Book Address Book Before Steps select A void Area Storage A void Area Confirmation and Modification A void Area Deletion All A void Area Deletion Category.
49 Before Use Getting started Routing Address Book : Changes the detour position : Reduces the size of the av oid area. : Increases the size of the av oid area. Select an av oid area using your preferred method. Select an av oid area to be modified. Select an av oid area to be deleted.
50 Before Use Getting started Routing Address Book V olume Adjustment V olume Adjustment Y ou can adjust the volume control f or the voice guidance. Before Steps select MENU ENTER ENTER Open the [V OLUME] screen 1 Select the appropriate b utton to set the v olume between (minimum) and (maximum).
51 Before Use Getting started Routing Address Book V oice Recognition If necessary Precautions/System P erf or mance V oice guidance has the following functions: n Intersection guidance l The system voice announces the distance to an upcoming turn and the turning direction.
52 Before Use Getting started Routing Address Book Vo i c e Recognition If necessary GPS is a position detecting system utilizing the signals from GPS satellites deplo yed b y the U .
53 Before Use Getting started Routing Address Book V oice Recognition If necessary Precautions/System P erf or mance In the follo wing situations, your vehic le position may not be displayed correctl y on the map. But, as you keep driving, y our vehicle position will be automatically corrected utilizing map matching and GPS data.
54 Before Use Getting started Routing Address Book Vo i c e Recognition If necessary Although you ma y encounter the following prob lems in a route sear ch, there is nothing wrong with the system. The navigation system is just a support system for the driver .
55 Before Use Getting started Routing Address Book V oice Recognition If necessary T roub leshooting Note There ma y be some problems due to oper ational errors or mistak es.
56 Before Use Getting started Routing Address Book Vo i c e Recognition If necessary No GPS symbols are display ed l GPS signals ma y not be received because of obstructions. After moving the v ehicle a wa y from obstr uctions, the GPS signals can be received.
57 Before Use Getting started Routing Address Book V oice Recognition If necessary T roub leshooting Please insert a MAP D VD. l The disc is not installed.
58 Before Use Getting started Routing Address Book Vo i c e Recognition If necessary Maintenance n Cleaning this product Use a dr y , soft cloth to wipe it. n Cautions for c leaning Ne ver use solv ents such as benzene and thinners, they could mar the surf ace of the unit.
Ein wichtiger Punkt beim Kauf des Geräts Mazda 2008 3 4-DOOR (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Mazda 2008 3 4-DOOR noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Mazda 2008 3 4-DOOR - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Mazda 2008 3 4-DOOR reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Mazda 2008 3 4-DOOR erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Mazda 2008 3 4-DOOR besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Mazda 2008 3 4-DOOR verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Mazda 2008 3 4-DOOR. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Mazda 2008 3 4-DOOR gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
